Turn on and put on your Apple Watch
To turn on your Apple Watch, press and hold the side button until the Apple logo appears. This may take a few minutes.
How to connect Apple Watch to iPhone?
I think everyone who has already acquired an Apple Watch or is just about to do so understands that this gadget was created to live in close contact with the iPhone. The target accessory, so to speak. The novelty works with all models, starting with the iPhone 5. So, you have become the proud owner of the new product and where to start meeting and chatting with a new friend?
Step 1. Connect the charger to the watch.
Simply plug in the included charger and secure the magnetic end to the back of your Apple Watch.
Hold the side button for 1 or 2 seconds and you will see the Apple logo. Then select your language. Don’t panic if you haven’t found Russian on the menu. He’s really not there. At least for now. Nevertheless, the accessory perfectly perceives all notifications, names of contacts and other words in Russian. No krakozyabr.
Step 3. Open the Apple Watch app on your iPhone.
A message will appear on the watch screen asking you to open an iPhone app that you wisely pre-installed. Everything, the connection process has started!
Step 4. Point your smartphone camera at the Apple Watch screen.
In principle, you only need to do what the application asks for and everything should happen automatically. If suddenly something failed, try to do everything manually, which is also very simple. Click “i” (“i”) on the display of your novelty and you will see the name of your watch. Then, in the iPhone app, select that title as soon as it appears. After that, the watch will show you a six-digit code that you need to enter into the application on the iPhone.
Fix Apple Watch Won’t Pair with iPhone Problem| Apple Watch Pairing Failed Error Solved
Step 5. Agree to all terms and conditions and create a password.
After all the above manipulations, you will need to link the devices via iCloud. You accept all the conditions (you have no choice. the money has been paid), create a password. everything is as usual: the more complicated the better. And most importantly, immediately write it down in a daddy with passwords on your, most likely, iMac or MacBook.
Step 6. Decide if Apple Watch will be unlocked via iPhone.
This question will pop up on the watch display on its own. The bottom line is that when the watch is on your wrist and paired with an iPhone, you don’t need to enter a code. Do you agree? Then take this option. Don’t worry if you suddenly change your mind later, you can always undo it.
In general, we put the watch aside and go to drink tea for about 10 minutes. In the meantime, all applications installed on the iPhone and optimized for Apple Watch will be in the device’s memory.
Step 8. If you need to cancel pairing and install something else, then repeat all of the above. The good news is that the iPhone saves a local backup automatically so you can restore your database whenever you want.
Step 9. We use, enjoy and enjoy life together with a new product from Cupertino, or rather, from China.
What if you can’t pair
If synchronization has not occurred, try to break the pair and create again. To do this, click the start of the program “Pair Apple Watch manually” (Pair Apple Watch Maually). Instructions on how to do this will appear on the screen.
Breaking and re-creating a bond
- On the Watch, select the “Settings” item, find the “Reset” section and tap on the inscription “Erase content and settings”.
- Open the Apple Watch program on the phone, break the pair.
- Create a new pair.
This is Why Your Apple Watch And iPhone Aren’t Pairing
Position iPhone over animation
Center the watch face in the viewfinder on iPhone. Wait for the message that Apple Watch has been paired.
If you can’t use your camera, click Manually Pair Apple Watch and follow the onscreen instructions. Find out what to do if the “i” icon is not displayed.
Bring Apple Watch to iPhone
Wait until the iPhone displays the message “Use your iPhone to set up this Apple Watch,” then click Continue. If this message doesn’t appear, open the Apple Watch app and click Pair.
Your Apple Watch must be near your iPhone before completing these steps.
Through the “Find iPhone” application
The user has to do:
- Download from the Apple Store and install the utility on the smart.
- Open the program.
- Log in with Apple ID and password.
- Click on Apple Watch.
- Track the location of the clock on the map.
For a quick search, it is possible to activate an audible signal on the chronometer. But the sound can only be heard if the wrist device is nearby.
Nuance: Whichever method the user chooses, the watch will be reflected on the map only if it is connected to Wi-Fi, a cellular network or a paired iPhone.
How to connect and set up Apple Watch correctly. pairing with 3 types of devices
“Apple” watch is a miniature computer on the hand. But to start using this wonderful device, you need to pair it with a suitable gadget. How to connect Apple Watch to iPhone, iPad or PC? How to set up your device correctly? Is it possible to break the pair and connect Apple Watch to another gadget? All about the nuances of synchronization and settings for a wrist accessory from Apple can be found in this article.
What to do if you need to disconnect iWatch from iPhone or iPad
Before connecting Apple Watch to another iPhone XR, XS, etc., or vice versa synchronizing iPhone with other watches, you need to break the pair between 2 gadgets.
How to do it right:
Nuance: when restoring from a backup, all the settings and parameters of the watch phone are saved in iCloud, so at any time you can recreate the old pair of 2 gadgets.
How to set up Apple Watch correctly
What settings are available in the Apple Watch from Series 3 or other “apple” watches:
Detailed setting of the watch is carried out in a proprietary program from Apple installed on an iPhone or iPad Air or another series. Here you can select a watch face, filter notifications, etc.
How to connect watch to computer
Using Apple Watch in conjunction with a PC, as with an iPhone or iPad, will not work. But Apple developers have provided the ability to unlock the Mac using a watch phone. Why does the user need it? Auto unlock allows you to access your PC without entering passwords. Unlocked Apple Watch on your wrist. everything you need to get started with your Mac.
- on Mac, activate Bluetooth and Wi-Fi;
- sign in to iCloud with the same Apple ID for Mac and Apple Watch;
- set a password on the watch;
- in laptop settings allow Apple Watch to unlock PC.
A nuance: this works on watchOS from version 3, and on Macs with Sierra OS and later.
How to find your device
If smart watches, for example, MNNL2FS / A are lost or stolen by intruders, you can use 2 methods to find them.
Sync Apple Watch and iPad
If there is no smart at hand, can iWatch be tied to another gadget of the Apple family. iPad? No, you can only sync smartwatches with an iPhone running the latest version of iOS. Apple Watch is designed to pair with an iPhone and is in no way compatible with an iPad.
Step-by-step instructions on how to link Apple Watch to iPhone
For the first time, Apple Watch and iPhone are merging in this way:
Turn on Apple Watch (press and hold the button on the side, under the Digital Crown).
Bring the watch to the iPhone, such as this XR 128GB Product Red.
The screen will display a menu from which you need to select a region, language.
How to sync iPhone with Apple Watch? Wait for the viewfinder to appear and point the photo module at the chronometer dial.
Nuance: you can bind devices manually, for this a 6-digit code is dialed (it will be displayed on the watch phone screen if you click on the corresponding inscription on the phone display) on the iPhone.
Wait for the message that the connection was successful.
The system will offer 2 options for the development of events: configure the watch phone as a new one or restore a copy from a backup. The first option is suitable for those who have just purchased a brand new device, as an option, Series 4 Gold Aluminum. The second. if the user has previously used another watch phone in conjunction with this iPhone. In this case, the system will automatically load the used parameters. To further configure Apple Watch, you need to select one thing.
How to proceed to connect Apple Watch to a new iPhone, say, X Silver? The user will have to choose on which hand he will wear the chronometer (right-handed / left-handed). After that, the system will ask you to agree to the terms of the license agreement in order to continue working with Apple Watch. And to log in to the Apple system, you will need to enter your ID. Was the authorization successful? It’s time to find out how to set up Apple Watch further. A separate section is devoted to this just below in the article.
Can Android Smartwatch Connect to iPhone
Recently, there has been a tendency associated with the transition of “Yabloko” to wearable gadgets running Android. There are basically two reasons for this:
- The price of products from Cupertino has long been the talk of the town: analogues from other manufacturers are half the price.
- The design of Apple’s smartwatches leaves a lot of questions for developers. I want something else that would emphasize the style of its owner.
Some smartwatches are indistinguishable from real ones in appearance.
So how do you connect your smartwatch to your iPhone? Fortunately, programmers have heard the aspirations of ordinary users and now it is possible to use a smart chronometer from most manufacturers with the iPhone. At the same time, you do not need to arrange dances with tambourines. a couple of applications and simple manipulations with them are enough.
What applications do you need to connect your smartwatch to your iPhone
Most wearable gadgets are running the Android Wear operating system, and it is for such gadgets that two applications have been created that will have to be downloaded if the iPhone owner decides to purchase a Google chronometer.
Important! Smartwatch app is installed automatically.
However, some manufacturers of smart watches met their potential buyers halfway and provided the ability to connect them to the iPhone without using an Android smartphone. To do this, a special application is installed on the gadget with iOS. For example, for smart chronometers from Samsung, this is the Galaxy Wearable utility, aka Samsung Gear, and for gadgets from Amazfit. Me Fit. Therefore, the answer to the question whether Samsung Watch can be connected to an iPhone will be positive.
How to connect Amazfit to iPhone
To connect a wearable gadget from Xiaomi, which are produced under the Amazfit brand, you will need to create an account in this program. It’s great if the user already has a profile on the social network: you can use it to log in to the application.
After you are logged in, you can start synchronizing:
- Place Amazfit next to the smartphone.
- Turn on Bluetooth on iPhone.
- In the application, in the “Profile” section, select “Device”.
- Click on “Clock” and select your model from the list provided.
- The smartphone will start searching for the device and after detecting the wearable device, it will ask for confirmation.
- Press confirmation on the Amazfit screen.
- The device is now connected to the iPhone.
Can Samsung Watch Connect to iPhone
The procedure for connecting Samsung Watch to iPhone is as follows:
- Place the Samsung Gear next to the smartphone.
- Turn on Bluetooth on your phone.
- Launch the application.
- On the welcome screen, click on the “Connect to Gear” button.
- The program itself will find the Galaxy Watch and offer to connect to them.
- After the devices are connected, the access password will be displayed on the screens of both. It does not need to be entered anywhere, it is enough to confirm that the desired code is displayed on the display of gadgets.
- To confirm on the watch screen, press the “checkmark”, and on the iPhone. the “Pair” button.
- The Galaxy Watch is now synced to your iPhone and can be used.
Important! Before connecting Samsung watch to iPhone, you need to update your gadget to the latest version.
Connecting Other Smart Watches to iPhone
It will take a little more effort to sync portable devices from other manufacturers with iPhone. So, all the preparatory measures have been completed, but for verification, a kind of checklist is presented below:
- there is a smartphone running Android with an application installed on it for controlling a smart watch;
- the BLE Utility application is installed on the iPhone;
- the clock itself is present and it is turned on;
- Bluetooth is enabled on both smartphones.
Now you can start synchronizing your gadget and your Android smartphone:
- Open the application and click “Configure”.
- Select the desired language on the watch.
- After completing all the requests of the application, it will start searching for the device.
- When the search process is over, a code will be displayed on the screen of the wearable gadget, which must be entered into the appropriate field on the smartphone display and click the “Connect” button.
- A few more manipulations (what exactly to do will be prompted by the application itself) and the clock is synchronized.
It is more convenient to watch the weather on your hand, and not reach your smartphone
The next step is to link your smart chronometer to your iPhone:
- Launch BLE Utility Application.
- Go to the “Peripheral” tab.
- The watch will issue a special password that must be entered into a field on the iPhone screen.
- Devices will start to align and pair.
What if you can’t pair
If synchronization has not occurred, try to break the pair and create again. To do this, click the start of the program “Pair Apple Watch manually” (Pair Apple Watch Maually). Instructions on how to do this will appear on the screen.
Try to connect Apple Watch to iPhone again
In case of unsuccessful contact, they try to connect the iWatch to the iPhone again. Step-by-step instructions for this process:
- iWatch and iPhone are positioned next to each other.
- On iPhone, turn off airplane mode and turn on Wi-Fi and Bluetooth. To do this, swipe upwards across the phone screen. to open the “Control Center” section.
- Both devices restart.
Sometimes these manipulations do not lead to a positive result. In this case, you need to break the pair between the gadgets and create it again.
First launch, pairing and setup
Before launching, smart watches need to be checked and configured. The manufacturer explained how to set up Apple Watch and prepared step-by-step instructions for this. The watch works with iPhone 6 and all subsequent modifications equipped with the latest version of iOS.
Like any other device, your smartwatch needs a charge. The device is plugged into a power outlet using an Apple charging cable or a magnetic dock that attaches to a USB power adapter. It takes a while to fully charge.
The next step is to connect to the phone.
- To solve the problem of how to connect Apple Watch to iPhone, you first need to turn on the smart device. To do this, there is a button on the side panel. Press the button for a few seconds until the Apple logo appears on the screen. After switching on, you need to select the language.
- The next step is to ask the watch to open the Apple Watch app on the iPhone. It is installed by the manufacturer in advance, during the software update.
- The fact that the program is running is signaled by the appearance of different patterns on the screen of the gadget, and a camera is launched on the phone.
- The iWatch device works on either side. you need to choose which hand it will be worn on. To continue, accept the terms of service and register your watch with your Apple ID.
- In this case, a series of installation notifications from the iPhone will be displayed on the screen of the device.
If the camera does not turn on, you need to pair or sync Apple Watch with iPhone and try to pair. To do this, the watch and the iPhone are placed side by side and enter a six-digit pairing code for the devices. iWatch finds iPhone via Bluetooth within a radius of 10 m. The device will be able to contact the phone from a longer distance after connecting to a Wi-Fi network. Bluetooth connection reduces battery consumption by 50%.
Check Apple Watch connection
You can check if your Apple Watch is connected to your iPhone in 2 ways. On the watch, the check is performed through the “Control Center” section. The “Watch” application is used for this purpose on the phone.
In the first option, they make a gesture upward to open the “Control Panel” section. A red icon in the form of a crossed-out phone or a red cross appears in the upper left corner. This indicates a lack of communication between electronic devices.
Turning on the Watch app shows you have contact with the iPhone. If there is no connection during the next check, then turn on and off the “Airplane mode” button. The connection should be restored.
How to properly connect Apple Watch to iPhone
Smart watch is a multifunctional gadget from Apple. To take advantage of the device’s capabilities, you need to know how to connect Apple Watch to iPhone.
Break a pair and create it from the beginning
In the absence of contact between the devices, the pair is broken and re-created.
- On the watch, they select the “Settings” section, go to “Basic”, press “Reset”, select the “Erase content and settings” button.
- The Watch program is launched on the phone. Select the section “My watch”. A clock icon appears at the top left of the screen. Next to it is the “i” button, which you need to press.
- In the menu that opens, select the “Unpair Apple Watch” box. Click on it again to confirm the action.
- Pair iWatch and iPhone.
- At the end of the procedure, the gadgets restart.
No notifications appear
Usually, you see notifications on the smartphone screen, but only until it is locked. Otherwise, notifications will be sent to the watch, but if they are not there, then most likely the watch is also locked or the Do Not Disturb mode is enabled.
If you have set a password for the watch (via a smartphone), then it will automatically lock when not worn on your hand, as well as when you lose contact with the skin and when charging. Remove the password, or tighten the strap. Forgot your password? You will have to reset your watch settings completely. To do this, launch the Watch application on your smartphone, select the menu items “My watch” “General” “Reset” “Erase all content and settings”. In cases where the watch was not connected to the smartphone, you need to use this instruction.
Sometimes the reason for not receiving notifications is Do Not Disturb mode, which is displayed on the screen with a crescent moon icon. In the watch’s Settings menu, select the crescent moon icon and press it to turn off the mode.
Mickey Mouse doesn’t tell time what to do?
The clock can sound the current time aloud after tapping on the screen, if there is a Mickey Mouse or Minnie Mouse dial. What to do if the mouse is silent?
Make sure Quiet Mode is disabled. Press and hold the bottom of the watch face. Wait for Control Center to open, then swipe up.
Open the Apple Watch app, go to the My Watch tab, and then click Sounds, Tactile Cues. Then make sure Time By Touch is enabled.
Still not talking? We connect to Wi-Fi and put the charger on the clock for 15 minutes, after which we check again.
Does the animal still play in silence with us? Then let’s move the dial. Press hard on the screen, swipe up, then select “Delete”. Swipe left until the plus sign appears. add the dial again. Should help now.
IPhone battery drains in hours
Some users have had an issue with fast-draining iPhone batteries when using their Apple Watch. If it seems to you that the watch is literally “sucking” energy from the phone, open the “Battery” menu and check if the Watch app is in the first position in the “Battery usage” list.
Make sure Apple Watch and iPhone are connected via Bluetooth, as this type of connection uses the least amount of power.
Open the Watch app on your smartphone and turn off all unnecessary notifications.
Go to Settings General Software Update and check if iOS is updated on iPhone.
Open the Watch application on your smartphone and in the tab “My Watch” “General” “Software update” and check if the software for the watch is updated.
Open the Watch app on iPhone, select “My Watch” and pair with it. Reconfigure the devices after the operation is complete.
Restoring your watch to its factory settings (and deleting all content from it along the way) sometimes solves the problem of excess power consumption. Select Settings General Reset Erase All Content and Settings. Upon completion, you will have to reconfigure the watch connections with other devices.
Freeze and crash
There have been several reports that the Apple Watch turns off randomly or does not respond to requests (“crashing” and “freezing”). To keep your watch from freezing, here’s what you can try.
Try turning off your watch by holding down the side button and sliding the switch to the right. Press the button until the Apple logo appears to turn it on. Most likely, a reboot will only help temporarily.
If your watch is unresponsive, try holding the side button with the Digital Crown for 10 seconds until the Apple logo appears.
Open the Watch app on your smartphone, go to the “My Watch” “General” “Software Update” tab and check if you need to update.
Falls can be caused by a specific application. If you notice a connection between frequent use of a particular application and unstable operation of the device, uninstall this program. Open the Watch application on your smartphone, select the problematic program and turn off its display in the watch.
Sometimes, a hard reset can help sort out these issues. In the watch, select Settings, General, Reset, Erase All Content and Settings. After that, you will have to re-configure the clock.
Some users were unable to update their watch to the latest watchOS. The problem is so common that Apple has issued official instructions.
Restart the watch, but not forcibly (without holding down the Digital Crown). Reboot your watch-linked iPhone. Try updating your watch software again via your smartphone.
If the installation does not start and does not load, select the Watch application on your smartphone, select the menu “My watch” “General” “Use” “Software”, delete the update file and try to download and install it again.
What to do if Apple Watch won’t turn on, won’t pair, won’t update, and Mickey Mouse won’t tell the time out loud?
Subscribe to our newsletter, be the first to know about new products, contests and promotions!
Remember Apple’s viral 2002 ad with Ellen Face relaxingly explaining under the influence of Benadryl how reliable Apple products are? The days when this video was relevant are irrevocably gone. This is especially true of the Apple Watch Smart-watch, the forums of the happy owners of which are full of annoyance and messages about bugs, errors, shortcomings. Some issues bother users more often than others. Here is a list of the 10 most common problems and how to deal with them.
- Bluetooth is frequently disconnected or cannot be paired at all
- Watch battery runs out too quickly
- IPhone battery drains in hours
- Watch not charging
- Freeze and crash
- Doesn’t monitor daily activity
- Not included
- No notifications appear
- Not updated
- Are too slow
- Mickey Mouse doesn’t tell the time
- Can’t connect to Android (Samsung, Xiaomi, HTC, etc.)
Doesn’t monitor daily activity
Some users reported that their watch did not count steps correctly and did not take measurements during exercise. Fortunately, there are several ways to deal with this problem.
On your smartphone (connected to the watch), launch the Watch application, select the “My Watch” “General” “Wrist recognition” menu. Turn it on if it’s off.
Make sure the strap of your watch is not loose on your wrist. Tightening the strap will allow the watch to better monitor activity. Buy a dedicated sports bracelet for Apple Watch.
Why Isn’t My Apple Watch Pairing?
Update your weight and height information because Apple Watch calculates metrics based on that data. Open the Watch app on your smartphone, select “My Watch” “Health” and change the values for “Height” and “Weight”.
Your watch should be re-calibrated. Start the process by selecting the Watch app on your smartphone and navigating to the menu items “My Watch” “Settings” “Privacy” “Movement and Fitness” “Reset Calibration Data”. Re-calibrate according to Apple instructions.
What to do if Apple Watch won’t connect to WI-FI
There is such a problem, but it can be solved.
By default, Apple Watch connects to iPhone via Bluetooth at a distance of up to 10 meters and should switch to Wi-Fi mode if the smartphone cannot be found. This is not always the case.
Important to know: the watch can only connect to a 2.4 GHz Wi-Fi network. They cannot work in 5 GHz networks. Your iPhone must know this network and synchronize the access keys with the watch in advance.
My network is built only by Apple routers, so I did not expect any problems. But. the trouble.
The first thing I did was scan all corners of the WI-FI Explorer room and make sure that there is a good signal everywhere in the 2.4 GHz band (diagram above). But I didn’t want to turn off the “pure” 5 GHz. The solution found this.
How to make Apple Watch work over Wi-Fi
Wait until the watch finds the phone and a green connection icon appears on the “Preview” screen.
Check the connection by sending a search signal from the watch to the iPhone. If all is well and they are connected reliably, you can try turning off Bluetooth on your phone again to test the Apple Watch’s WI-FI connection. First, a red icon of a loss of connection will appear, but then, if everything went well and the clock updated the information about the network, a green cloud will appear, symbolizing an indirect connection of devices.
If the instructions didn’t help, try unpairing your iPhone and Apple Watch and then pairing it up again. As a last resort, temporarily turn off the 5 GHz band in your network and restore it after making sure that the watch is connected to WI-FI stably.
If you faced similar problems, write in the Комментарии и мнения владельцев which “dance” helped you.