Laptops and Tablets • Recommendations and advice

Laptops

Where is the insert button on the laptop

Where is the insert key on a laptop

I decided to take a more powerful laptop for work, the choice fell on the HP dv6-3106er. An excellent laptop in an aluminum case, on which Windows was immediately demolished with its accompanying disk partitions and Ubuntu was installed. Below is a description of how to make friends with this laptop ubuntu 10.10.

The first thing I want to say about is the keyboard. The keyboard is rather non-standard and it takes a long time to get used to it (my wife is more comfortable on Samsung :). At first, the extra keys located on the left side of the keyboard are very annoying. The constant hit on the calculator call key, instead of the Ctrl key, at first is very annoying. In general, some of the problems solved below concern the keyboard.

After the first launch of the note, I was simply discouraged by the fact that, by default, pressing the Fn keys caused the actions usually called by the fnFn combination, and when fnFn was pressed, the actions of the usual Fn were triggered, respectively. The solution is in the BIOS. Need to change ‘System Configuration‘-’Action Keys Mode‘On‘ disabled ’.

The combined Insert / PrtScr key is just awful. Everything would be fine, but by default, when this key is pressed, PrtScr is triggered, and Insert is called by the fnPrtScr combination. But Insert is used much more often than PrtScr. To solve this problem, we change the key codes in places:
1. Create a file

Who is not aware of the ClickPad, unlike the TouchPad, is deprived of traditional mechanical buttons in favor of expanding the working surface. The ClickPad has a hardware key hiding under the surface of the clickpad. you can press it anywhere on the ClickPad. The rest of the actions, by clicking on the ClickPad, can be configured using the zones set on the clickpad surface. Also ClickPad recognizes three-finger gestures.

Unfortunately, the clickpad in this laptop model is not on friendly terms with Ubuntu quite as expected. By pressing, only the left key works, the right one does not work, as well as the on / off key of the clickpad. by the way, it was not possible to get it to work.

insert, button, laptop

Searching the Internet, I found two ways to fix the clickpad.

First way (taken from here):
1. If the ‘dkms’ package is not installed, install it:

After rebooting, the right clickpad button should work.
True, this method has one drawback. multitouch does not work

Second way (taken from here)
1. Download the deb package ‘synaptics-dkms_1.1.1_all.deb’

Reboot.
This method has one drawback. the right button does not work by clicking on the clickpad, but it does multitouch. I like this method better, since now the right key works on a click with two fingers, and the middle key works on a click with three fingers. Vertical and horizontal scrolling is done with two fingers. Well, in general, it is much more convenient to work with multitouch

We hang on / off. ClickPad on the HP MediaSmart Button

After installing ubuntu, all multimedia keys immediately started working, except for the ‘HP MediaSmart’ key. After pressing this key, in dmesg you can see the following line:

That’s it, now the key should work and perform the function of enabling / disabling the clickpad.
3. In order not to assign the key again after each reboot, add the line ‘setkeycodes e042 192’ to the file ‘/etc/rc.local‘BEFORE the last closing line’ ‘exit 0’.

What does Insert, Scroll lock, Pause, Break, Home & End Key do? [Hindi]

By the way, if someone wants to enable / disable the clickpad command via the terminal, here is a small script:

This laptop model has two video cards, one integrated ‘ATI Radeon HD 4200’ and a discrete ‘Ati Radeon HD 5600’.

I hope everyone understands that an integrated card is needed when you need to reduce the power consumption of a laptop, but a discrete card for 3D, video games, etc. But even here, ubuntu was not without plugs. after starting the computer, the integrated card is always active by default, but the discrete card is also on, that is, both cards consume power, which greatly reduces the battery life of the laptop. Unfortunately, the manufacturer decided not to bother himself and did not add options for managing video cards in the BIOS.
Fortunately, some time ago, the vga_switcheroo module was included in the Linux kernel, which allows you to control several video cards, but there are some nuances here:
1) There are still no utilities for managing this module;
2) It works only with free drivers, that is, nothing can be done through ATI Catalyst yet, unlike the same Windows, for example;
3) After switching video cards, you need to re-login (restart X’s).

If you can still decide something with the first point, then you need to decide on the second one yourself, sit on free drivers, or on proprietary ones, without the ability to switch / disable video cards.
I proceed in the following way. Most of the time, when I have an outlet at hand, I use proprietary drivers, but if I need to go somewhere and need to squeeze out as much battery life as possible, I switch to free drivers and turn off the discrete video card.

And so, let’s move from theory to practice.
1. To manipulate the vga_switcheroo module, remove the proprietary driver via ‘System‘-’Administration‘-’Additional drivers‘-’Proprietary FGLRX driver for ATI / AMD graphics cards‘-’Delete
2. We reboot and after the reboot we check that we have the required file:

READ  How to Remove Password from Laptop If Forgot

6.2. Second option.
Download the ‘switch_before_shutdown.sh’ script. We make it executable, according to the same principle as the first script. Now, when you need to reboot or turn off the computer, run this script and select the desired action.

Scripts for switching video cards and shutting down the computer were borrowed from Roberto Martinez

All the same steps are performed here as for the Samsung R528

P.S. After it turned out that ATI’s Linux drivers were blacklisted by popular browsers (ie, browsers do not display WebGL, CSS 3D, etc.), the laptop was sold. Now I have sworn never to buy ATI video cards (or products with it on board) again. how many years have passed, and the firewood for them is still the same buggy

I decided to take a more powerful laptop for work, the choice fell on the HP dv6-3106er. An excellent laptop in an aluminum case, on which Windows was immediately demolished with its accompanying disk partitions and Ubuntu was installed. Below is a description of how to make friends with this laptop ubuntu 10.10.

The first thing I want to say about is the keyboard. The keyboard is rather non-standard and it takes a long time to get used to it (my wife is more comfortable on Samsung :). At first, the extra keys located on the left side of the keyboard are very annoying. The constant hit on the calculator call key, instead of the Ctrl key, at first is very annoying. In general, some of the problems solved below concern the keyboard.

After the first launch of the note, I was simply discouraged by the fact that by default, pressing the Fn keys caused the actions usually called by the fnFn combination, and when fnFn was pressed, the actions of the usual Fn were triggered, respectively. The solution is in the BIOS. Need to change ‘System Configuration‘-’Action Keys Mode‘On‘ disabled ’.

The combined Insert / PrtScr key is just awful. Everything would be fine, but by default, by pressing this key PrtScr is triggered, and Insert is called by the fnPrtScr combination. But Insert is used much more often than PrtScr. To solve this problem, we change the key codes in places:
1. Create a file

Who is not aware of the ClickPad, unlike the TouchPad, is deprived of traditional mechanical buttons in favor of expanding the working surface. The ClickPad has a hardware key hiding under the surface of the clickpad. you can press it anywhere on the ClickPad. The rest of the actions, by clicking on the ClickPad, can be configured using the zones set on the clickpad surface. Also ClickPad recognizes three-finger gestures.

Unfortunately, the clickpad in this laptop model is not on friendly terms with Ubuntu quite as expected. By pressing, only the left key works, the right one does not work, as well as the on / off key of the clickpad. by the way, it was not possible to get it to work.

Searching the Internet, I found two ways to fix the clickpad.

First way (taken from here):
1. If the ‘dkms’ package is not installed, install it:

After rebooting, the right clickpad button should work.
True, this method has one drawback. multitouch does not work

Second way (taken from here)
1. Download the deb package ‘synaptics-dkms_1.1.1_all.deb’

Reboot.
This method has one drawback. the right button does not work by clicking on the clickpad, but multitouch does. I like this method more, since now the right key works on a click with two fingers, and the middle key works on a click with three fingers. Vertical and horizontal scrolling is done with two fingers. Well, in general, it is much more convenient to work with multitouch

We hang on / off. ClickPad on the HP MediaSmart Button

After installing ubuntu, all multimedia keys immediately started working, except for the ‘HP MediaSmart’ key. After pressing this key, in dmesg you can see the following line:

That’s it, now the key should work and perform the function of enabling / disabling the clickpad.
3. In order not to assign the key again after each reboot, add the line ‘setkeycodes e042 192’ to the file ‘/etc/rc.local‘BEFORE the last closing line’ ‘exit 0’.

By the way, if someone wants to enable / disable the clickpad command via the terminal, here is a small script:

This laptop model has two video cards, one integrated ‘ATI Radeon HD 4200’ and a discrete ‘Ati Radeon HD 5600’.

How can I press “Insert” on a keyboard without that key? (3 Solutions!!)

I hope everyone understands that an integrated card is needed when you need to reduce the power consumption of a laptop, but a discrete card for 3D, video games, etc. But even here, ubuntu was not without plugs. after starting the computer, the integrated card is always active by default, but the discrete card is also on, that is, both cards consume power, which greatly reduces the battery life of the laptop. Unfortunately, the manufacturer decided not to bother himself and did not add options for managing video cards in the BIOS.
Fortunately, some time ago, the vga_switcheroo module was included in the Linux kernel, which allows you to control several video cards, but there are some nuances here:
1) There are still no utilities for managing this module;
2) It works only with free drivers, that is, nothing can be done through ATI Catalyst yet, unlike the same Windows, for example;
3) After switching video cards, you need to re-login (restart X’s).

If you can still decide something with the first point, then you need to decide on the second one yourself, sit on free drivers, or on proprietary ones, without the ability to switch / disable video cards.
I proceed in the following way. Most of the time, when I have an outlet at hand, I use proprietary drivers, but if I need to go somewhere and need to squeeze out as much battery life as possible, I switch to free drivers and turn off the discrete video card.

And so, let’s move from theory to practice.
1. To manipulate the vga_switcheroo module, remove the proprietary driver via ‘System‘-’Administration‘-’Additional drivers‘-’Proprietary FGLRX driver for ATI / AMD graphics cards‘-’Delete
2. We reboot and after the reboot we check that we have the required file:

READ  How To Find Your Hp Pavilion Laptop Model

6.2. Second option.
Download the ‘switch_before_shutdown.sh’ script. We make it executable, according to the same principle as the first script. Now, when you need to reboot or turn off the computer, run this script and select the desired action.

Scripts for switching video cards and shutting down the computer were borrowed from Roberto Martinez

All the same steps are performed here as for the Samsung R528

Where is the insert button on the laptop

Insert, or Ins, is a key on the keyboard of IBM PC-compatible computers designed to switch from the “insert” mode (in this mode, the text editor enters text starting from the insertion point and places it to the right of the page) into the “replace” mode ( in this mode, the text entered from the keyboard will replace the text already typed before).

The shortcut keys Ctrl Insert is similar to the “copy” command, ⇧ Shift Insert is similar to the “paste” command. These combinations work even where Ctrl C does not work. For example, in Corel Draw.

Recently, there has been a tendency for the Insert key to disappear from external keyboards and laptop PCs, in order to increase the Delete key.

Macintosh keyboards do not have the Insert key, instead there is an Fn or Help key.

Most computers and laptops have the same key layout on the keyboard. It should be noted that this rule does not apply to gaming keyboards that have additional keys.

Nevertheless, in today’s article we will take a closer look at the purpose and function of each key on a computer or laptop keyboard. over, we will tell you a few secret life hacks that will simplify your work with Windows.

Special or control keys

First of all, we will tell you about the purpose of special (control) keys.

  • Esc. Pressing this key cancels the action in the program. If you press the Esc key in the game, you will exit to the desktop.
  • Ctrl. Functional only when combined with other keys.
  • Alt. Functional only when combined with other keys.
  • Fn Lock. Present only on keyboards of laptops, netbooks. When Fn Lock is activated, F1-F12 keys are activated.
  • Windows (Win). The key to open the main menu “Start”.
  • Print Screen. Screenshot function of the visible part of the screen.
  • Pause Break. Allows you to stop the current operation in the program. Pause the game.
  • Scroll Lock. When activated, it opens the ability to work with the mouse, like a ball joystick. This way it is possible to scroll the page without scrolling the mouse wheel.

Question

One of the readers of my blog wants to know how to press “Insert” on the keyboard without the Insert key:

I have a Dell Dual USB / PS2 keyboard with built-in Touchpad Mouse P / N 0TH827, but it doesn’t have an Insert key. Is there any other way to press “Insert” on the keyboard?

Laptop keyboard. Key assignment

Navigation keys

  • Insert (Ins). The key performs the function of replacing text when typing.
  • Delete. Function key with which you can delete text and files.
  • Home. When typing, pressing the key, you can move the cursor to the beginning of the text.
  • End. When typing, by pressing the key, you can move the cursor to the end of the text.
  • PgUp. Key to scroll up page in browser and text editor.
  • PgDn. Key to scroll down the page in the browser and text editor.

Now after we have described each key, it is necessary to tell how the keys work in combination with others.

Finding a keyboard that has all the features you want can sometimes be a bit of a task, but what will you do when your chosen keyboard doesn’t have a specific but useful key?

Alphanumeric keys

  • Caps Lock. Activates the function of caps (capital) letters.
  • Shift. Temporarily activates the capital (capital) letter function.
  • Tab. In text editors, a new line, column is created.
  • Backspace. A key to delete characters, numbers, and also to undo an action.
  • Enter. Key to confirm actions.

On a mobile computing system

The Insert key on a laptop can be located in different places. If the mobile computer is equipped with a standard input subsystem, the arrangement of the elements of the set does not differ significantly. But when the laptop is equipped with an abbreviated keyboard, the button in question can be moved. over, each manufacturer in this case acts at its own discretion. It can also be part of the main character set or an auxiliary one. In the second case, simultaneously with it, you need to press the Fn key.

Additional use

The Insert button is used in a completely different way in various modifications of file managers. The latter include FAR, DOS Navigator and Norton Commander. Of course, now such software is extremely rarely used, but it will not be superfluous to know some of its features. If the cursor is on one of the panels of such software, then pressing this button on the input subsystem will result in the selection of the element on which the marker is located. This will move the pointer down one position. If you press this key again on a previously selected element, the previously performed action will be canceled.

Within the operating system, the Insert key can be used in various key combinations. For example, if you hold down first Ctrl, and then Insert, and then simultaneously release them, then the selected fragment of the document or the file will be placed on the clipboard. Another combination can be used to perform the reverse operation. That is, extract information from the clipboard and set it to the location of the cursor. In this case, immediately hold down Shift, then Insert and then release them.

Main purpose

As noted earlier, the Insert key can change its purpose depending on what software is currently in the active mode on the personal computer. First, let’s look at the algorithm for using it in text editors. This button on the peripheral dialing system in this case toggles the dialing and character substitution modes. In the first case, the letters are simply typed, and those to the right of the cursor are not replaced, but shifted. In the second case, the dialing order changes dramatically. When you turn on overwrite mode, the characters on the right will not shift. They will be replaced with those entered from the keyboard. You can determine the input mode of the text editor by the information panel, which is located directly above the taskbar. If the INS indicator is black, the letters are replaced. Otherwise, the dialing is carried out in the usual mode with an offset.

READ  Installing an SSD in an HP pavilion laptop

Insert key. Location and purpose

Most modern peripheral input systems have an Insert key. It can be used alone or in combination with other buttons on the keyboard. Also, its purpose may vary depending on what software is running on the personal computer at the moment. It is the peculiarities of using this element of the device that a small review offered to your attention will be devoted to.

On a regular keyboard

Now let’s figure out the location of the Insert key on the keyboard on the peripheral input subsystem of a conventional personal computer. over, you can find it in two places at once.

But there is an alternative in this case. There is a numeric keypad on the right side of the PC input device. But you can use the Num Lock key to change the order of its operation. If it is off and the indicator associated with it is off, then this part of the input system switches from the dialing mode to the navigation one. One key with “0” has the inscription INS or Insert. This keyboard element is a possible alternative in this case.

Within the framework of this informative article, the Insert key was considered. Previously, it was often used in the process of working on a personal computer. It was used both when typing text information, and when processing directories and files in file managers, and when copying or pasting data in the operating system. Now, there is no such urgent need for its active exploitation. A more convenient and practical alternative to it is the mouse. The use of a manipulator today can significantly increase the speed of work on a personal computer. Therefore, some manufacturers already exclude the key in question from the keyboard. Most likely, in the foreseeable future, it will begin to disappear on new keyboards, and in a few years it will generally become an extremely rare phenomenon.

How to disable the Insert function?

In Microsoft Word 2010, you can disable the Insert key to toggle between insert and overwrite modes. To do this, go to File. Options. Advanced and uncheck the option “Use INS key to switch insert and replace modes”.

How to enable Insert on an HP laptop?

Insert button on the keyboard of the HP ProBook 430 G6 Notebook PC

  • Fn m. Insert.
  • Fn. Delete.
  • Fn s. Print Screen.
  • Fn c. Scroll Lock.
  • Fn Rigth Shift = Pause Break.

When this key is pressed, the text entered by the user will replace the text already typed?

By default, as a rule, standard insertion is in effect, that is, the entered text is displayed to the right of the cursor. But when the “insert” key is pressed, then the text entered by the user will replace the one already typed earlier. May 16, 2019.

What is Num Lock on the keyboard?

Num Lock. (literally “fixing numbers”) key for switching and fixing the numeric register, located in the upper left corner of the numeric keypad. This mode is useful for compact keyboards that do not have separate cursor keys.

What does the Home button on the keyboard mean??

The arrow keys move the pointer (cursor) up, down, left, and right. The Home and End keys allow you to move to the beginning and end of something. a document, a line, a paragraph. Use the Page Up and Page Down keys to move up and down one screen.

Where is the Insert button on the keyboard?

The Insert (Ins) key is a key that switches the “insert” mode (when text is entered to the right of the cursor) to “replace” mode (when the entered text will replace the previously typed text). This key is located in the block of cursor control keys and is located to the left of Home and above Delete.

How to disable letter replacement on a laptop?

  • Select File Options.
  • Select Advanced.
  • Under Editing options, clear the Use INS key to control overwrite mode check box and the Use overwrite mode check box.

How to remove letter substitution?

To disable this mode, just press the Insert key again. When the mode is on, the OVR indicator is displayed on the status bar. And if you double-click on this indicator with the mouse, the symbol replacement mode will be turned off.

How to customize the insert button?

The shortcut keys Ctrl Insert is similar to the “copy” command, ⇧ Shift Insert is similar to the “paste” command. These combinations work even where Ctrl C does not work. For example, in Corel Draw. The Ins key was originally intended for this purpose.

How to disable the insert function on the keyboard?

In Microsoft Word 2010, you can disable the Insert key to toggle between insert and overwrite modes. To do this, go to File. Options. Advanced and uncheck the option “Use INS key to switch insert and replace modes”.

How to click the Insert button?

Note that the Shift key can act as a temporary Num Lock switch when you press one of the keyboard keys (just like the Shift key works as a toggle for uppercase letters). So when Num Lock is on, pressing Shift Numpad-0 will work as the Insert key.

What is Num Lock on the keyboard?

Num Lock. (literally “fixing numbers”) key for switching and fixing the numeric register, located in the upper left corner of the numeric keypad. This mode is useful for compact keyboards that do not have separate cursor keys.

How to remove the letter replacement function?

  • Select File Options.
  • Select Advanced.
  • Under Editing Options, clear the Use INS key to control overwrite mode check box and the Use overwrite mode check box.

How to enable Insert on an HP laptop?

Insert button on keyboard for HP ProBook 430 G6 Notebook PC

  • Fn m. Insert.
  • Fn. Delete.
  • Fn s. Print Screen.
  • Fn c. Scroll Lock.
  • Fn Rigth Shift = Pause Break.

Where is Del button on HP laptop?

Finding her is easy. It is located in the group of service keys between blocks with numbers and letters. Or located in the upper right corner of the laptop keyboard.

HSIDG.COM 2021