Installing Windows on a lenovo laptop from a USB flash drive

How to install Windows 7 on a Lenovo laptop in an hour

Increasingly, there are questions on the Internet about how to install Windows 7 on Lenovo laptops. over, people who encounter such a problem, in most cases, do not understand what the installation problems are connected with. At the same time, their laptops are new, and there can be no breakdowns. But errors and stoppers nevertheless arise. Today we will talk about how the Windows system is installed on Lenovo laptops, since this is a very urgent problem.

The most common problems

If you ask everyone why they want to reinstall the Windows system on a laptop, then in most cases you will hear the answer that supposedly all new computers have a “eight” by default, which is not always possible to get used to and which does not always suit the user with its ” sophisticated “gadgets. Much more convenient is the “seven” familiar to everyone, which is both more understandable to use and more convenient for solving specific problems. That is why on new laptops their owners decide to change the OS.

The most common problem when installing the “seven” on a Lenovo laptop is that the user cannot enter the BIOS at all. Even schoolchildren know that in order to reinstall Windows, you need to get into the basics of a computer. BIOS.

The rest of the problems may arise already during the installation process. We will dwell on them further.

Multiple installation paths

So, you cannot enter the BIOS, and you already have certain doubts about whether it is even on Lenovo laptops. In fact, there is, only it is arranged a little differently and the settings for a particular computer model need their own. But some are helped by the standard FnF10 command when starting Windows to enter the BIOS.

In order for you to see that cherished Bios window that has opened, you should slightly prepare your technique. First, the installation disc is inserted into the drive when the computer is turned on. In our case, this is Windows 7. Then you must turn off the computer, disconnect it from the power supply and remove the battery. Yes, it sounds ridiculous, but in most cases it helps. So, After that, it returns the battery to the place where it should be and turn on the laptop through the Novo button, which is located next to the start button.

During the download, you will see that you have entered the service menu. There you select the “Diagnostics” tab. From there, install the “UEFI Software Options”. After that, your computer will notify you with a short message that it needs to be restarted. If you follow the recommendations of your technique, then after rebooting the computer will go into BIOS by itself.

Next, you should find the Security section where you disable the SecuryBoot setting. Next, in the main menu, look for the Startup tab. Now you need to arrange the boot order of the disks, which will guide the system. To do this, in the Boot tab, find the computer’s hard drive (as a rule, it is designated as ATAHDD) and use the “” key or the top arrow to raise this tab to the very top. There may also be a problem that the tab does not rise. Then it will act on the contrary. we lower the WindowBootManager tab to the very bottom. In the second place in the list should be the name “ATAPICD1”, and after it the parameter from which the Windows system will be reinstalled.

After all these tricky manipulations, go back and look for the UEFI \ LegacyBoot tab and select the LegacyOnly parameter there. After you have saved using the F10 key, you can start a standard reinstallation of the system.

If this standard procedure did not help you, then you always have the opportunity to go to the official website of the Lenovo manufacturer and see a few tricks for installing the system there. But after you have found the BIOS on a LENOVO laptop, then you should not have any further problems with reinstalling, as it is standard for all models of computers and laptops.

How to reinstall Windows on a Lenovo laptop

Some Lenovo laptops are sold with a pre-installed free operating system FREE Dos123, which, to put it mildly :), is not suitable for work. Many owners of Lenovo laptops (and not only) are faced with the problem of self-installation of the operating system.

Downloading the installer

The very first problem that you may encounter is persistent loading from the hard disk and ignoring the disk or flash drive inserted into the drive with the operating system distribution kit, for example Windows XP / 7/10. This happens because the BIOS is not configured correctly, namely, the wrong boot order is specified. We need to first enter the BIOS setup. This is done at the initial stage of loading the laptop, a few seconds after turning it on, before loading FREE Dos.

The system will write that to enter the BIOS (or SETUP), you must press the DEL key or one of the “F1-F12” buttons, usually F2 (depending on the model). On Lenovo G500 series models, you need to press the OneKey Recovery key when the laptop is off, and on some models, FnF2 (F12) works.

Next, we find the “Boot menu” and set the boot priority there. To do this, look for the inscription “First boot device”, go into it and select “CD \ DVD-Rom” from the list that appears. Sometimes a list of bootable devices is not offered, then just go to the position “CD \ DVD-Rom” and move it to the very top by pressing the \-.

To select a USB flash drive, you need to find it by the model name and also move it up. By the way, a USB flash drive can be located in a subsection of hard drives (Hard Drive, HDD). Then we just find an exit from the SETUP program. select “SAVE ALL and EXIT”. “Yes”. Or just the “F10” button. For a one-time boot from a USB flash drive, you can skip entering the BIOS, but instead press F9 and select the boot device from the menu:

For G500 series models, and in general, it is recommended to first reset all default settings (“Load Defaults”) and only then set the desired boot priority. Also check that on the “Startup” tab the value “UEFI / Legacy Boot” is in the “Legacy Only” state, otherwise the installer may not start.


Some are wondering if a special version of Windows is needed for a laptop, as opposed to a personal computer? No, Windows is one for everyone, it is only important to choose the right version: XP or Seven / 10, depending on the configuration of your laptop or candy bar.

To install Windows 7/10, in most cases, it will be enough to know that you have at least two gigabytes of RAM, and for x64 versions you need 4GB or more. Another such moment, if a disk with drivers for Windows 7/10 was supplied with the laptop, and you, for any reason, need to install Windows XP, then before installing it you will have to download all drivers for this OS.

Next, boot from the boot disk with the operating system distribution kit and follow the instructions of the installer. The procedure will be the same as installing on a regular computer. Also reinstalling is no different from installing. Only at the stage of selecting the target disk, you need to format it, i.e. erase old data. For more information, see my free video course “How to Install Windows 7”

Download software

Installing the OS on Lenovo should start by disabling BIOS protection.

To do this, you need to reboot the device and press the F2 key to open the BIOS menu. If the menu does not open, you can try to press Delete or use the FN button together with a key from the F group.

READ  Lenovo BIOS setup utility boot from flash drive

To disable protection, open the Security item then Secure Boot by pressing the Enter key.

In Secure Boot, you must go to Disabled mode to disable protection.

You can return to the main menu by pressing Esc, then go to the Boot (Sturtap) section.

This section is responsible for configuring PC boot from a USB flash drive or CD.

  • To use a flash drive, select and place at the top of the list using the / keys-.
  • In the UEFI / Legacy Boot section, select Legacy Only.
  • Press F10 and save changes with Enter.

How to create a bootable Windows 10 USB stick with ultraiso

To prepare a bootable flash drive, you need to download the UltraIso program from the official website.

Next, the downloaded program is launched, following the manufacturer’s recommendations.

During installation, you must select the medium by specifying the USB device.

After the program is fully loaded, you can run the ISO image:

File-Open. Select a Windows 10 disk image.

In the “Boot” section, go to the “Burn hard disk image” section

After pressing the “Write” button, a window appears with a proposal to delete all data from the drive, you should click “Yes”.

Installing Windows 10 from a USB stick on a lenovo laptop

How to install Windows 10 from a USB stick on a Lenovo laptop: New Lenovo laptops are often sold with a preinstalled operating system.

However, the default OS does not always suit the owner and he wonders how to reinstall Windows on a lenovo laptop.

Downloading is possible both on a PC with a different operating system, and on a new one, where there was no system before.

Before reinstalling Windows on a Lenovo laptop using a USB flash drive, you must select a drive with at least 8 GB and format it.

During recording, all data is deleted, so you should save the data to another location.

Installing Windows on a Lenovo laptop

To install the OS, you need to do the following:

  • Insert the USB flash drive into the device and reboot it.
  • Windows will unpack the files for some time, after the process is complete, the program will offer the operating system to be installed. You must specify the Windows for which you have a license. To activate the OS, you need to enter the product key, or do it later. If there is a code, the key is activated automatically after connecting to the Internet. Click “Next”.

You should read the terms of the License Agreement and press the “Accept” button.

The first point involves updating the system while maintaining the old operating system settings and files.

The second option is used to completely reinstall the system.

Choosing the most suitable hard disk partition for installing Windows.

If there are several of them, and there is an SSD, then it is better to choose an SSD drive, it is the most productive and works faster than HDD.

If you want to create several partitions within 1 hard disk, you need to delete all partitions, after which free space will appear.

After creating a new disk, you need to format it and press the “Next” button to start the installation process.

This procedure takes 10-15 minutes, after which the computer will automatically restart.

After rebooting the system, a window for setting parameters will be displayed on the screen. It is recommended to disable all these parameters. in order not to do this manually, you can click on the item “Use standard parameters”.

We indicate the region of the user and configure the settings for connecting to the Internet.

Resetting BIOS settings to their original state

To avoid starting a new system installation, when using this flash drive, you must restore the old BIOS settings. To do this, you need to restart the computer and enter the BIOS menu in the same way that was used earlier to disable protection.

If Windows was downloaded from the official site, all updates should be installed automatically. You can check for all updates using the free DriverPack Solution program.

Self-installation of the operating system is not as difficult as it seems. Even a novice user who does not know how to reinstall Windows on a lenovo laptop can cope with it by following the simple recommendations specified in the text.

In the article, we have analyzed how to install Windows 10 from a flash drive on a lenovo laptop.

Installing Windows from a USB flash drive on a lenovo laptop

How to install Windows 10 from a USB stick on a Lenovo laptop: New Lenovo laptops are often sold with a preinstalled operating system.

However, the default OS does not always suit the owner and he wonders how to reinstall Windows on a lenovo laptop.

Before reinstalling Windows on a Lenovo laptop using a USB flash drive, you must select a drive with at least 8 GB and format it.

During recording, all data is deleted, so you should save the data to another location.

BIOS Login Methods [Lenovo]

1) Standard “hot” keys for login

On the vast majority of laptops of this brand. the F2 or F1 button should act (you need to press immediately after turning on the laptop. Model range: ThinkPad, IdeaPad, 3000 Series, ThinkCentre, ThinkStation).

On some models. may require pressing the FnF2 button combination (for example, in the G50).

Addition. The F12 key (FnF12. enter the Boot Menu) is very rare. to enter the BIOS (Lenovo model b590). I also recommend trying.

If you can’t enter this way, read the following recommendations.

Note. This article will tell you more about the classic entry into BIOS here: #BIOS

2) Dedicated recovery button “with an arrow”

Some Lenovo notebook models have special buttons on the device to enter the BIOS. For example, we are talking about these: g505, v580c, b50, b560, g50, g500, g505s, g570, g570e, g580, g700, z500, z580, Z50, B70 and others.

installing, windows, lenovo, laptop

When turned on, they may not react at all to your pressing of the F2 buttons. To enter the BIOS, in this case, you need to use the special Recovery button (with an arrow). You need to press it instead of the power button (i.e. when the laptop is turned off).

installing, windows, lenovo, laptop

The Recovery button is located on the body of the device, next to the power button (on some models this button is on the side).

Lenovo G700. button to enter device settings (including BIOS)

Lenovo B70. BIOS entry button next to the power input. It is most convenient to press with a pencil or pen

After your choice of BIOS Setup, you will go to the most common BIOS settings (as in other laptops) and you can set the necessary parameters.

Next, you will see a menu of several items, among which there will be an entry into the BIOS. the F1 button (see arrow-1 in the screenshot below).

Lenovo Model SL510. Logging in with ThinkVoltage

4) Hole instead of recovery button and ThinkVantage

A number of Lenovo laptop models do not have any buttons at all, but there is a small hole on the side of the device (usually where power is connected).

For example, a Lenovo 100 laptop does not have a recovery button (which is with an arrow) at all. There is a small hole (there is an arrow next to the hole). The button itself is located in this hole, to press it. you need to use, for example, a paper clip or a knitting needle.

Lenovo 100. BIOS entry hole

Manufacturers, apparently, are trying to eliminate accidental button presses. all the same, the vast majority of users have to enter BIOS very rarely.

1) Some laptop models do not allow entering the BIOS if it is running on battery power. I can’t say that this is a 100% glitch. but the setting is very controversial. To check for sure. connect the device to the network and try to enter the BIOS using the methods described above.

READ  How to connect a laptop to a Wi-Fi network

2) The Lenovo v580c model sometimes has a very unpleasant glitch: if you cleaned the disk and installed a new Windows, the BIOS entry buttons will stop working for you.

To enter the BIOS again (instructions for advanced users!). turn off the laptop, then unplug it, remove the battery. Next, remove the cover and take out the small battery from the mat. boards. After 5-10 minutes. assemble the device.

When enabled, the BIOS will be loaded automatically to set the basic parameters. You need to open the “Startup” tab: in the item with the “UEFI / Legacy boot” setting there are three parameters (Both, UEFI Only, Legacy Only). you need to select “Both”. In the item “UEFI / Legacy Boot Priority”, you need to set “Legacy”. Next, save the settings and restart the laptop. Everything should work as expected.

Great software to start creating your own videos (all steps follow!). Even a beginner will make a video!

    Computer accelerator

A program for cleaning Windows from garbage (speeds up the system, removes garbage, optimizes the registry).

How to install Windows 10 from a USB stick on a Lenovo laptop

Recently, there are a lot of questions with the BIOS regarding the brand of Lenovo laptops. The fact is that on laptops of this brand (on some models) there is a rather non-standard input into the BIOS (because of this, sometimes even those users who have this is not the first laptop fall into a stupor).

How to enter BIOS

Notebook BIOS entry methods may differ on different Lenovo models. First, try the standard login method. when you start a personal computer, you need to press the F2 button on the keyboard, sometimes holding down the Fn key before that. Next, the PC parameters menu will be called.

But this method is not always working. For some Lenovo models, the BIOS does not load when you press F2 or FnF2. for example, Lenovo Legion Y520, Lenovo G70, G50-30, or G500. If you tried to enter the BIOS using the above method, and you did not succeed, the following instruction is for you:

  • On the side of the laptop (where the charging socket is usually located) or right next to the power button, there should be a special small key with a curved arrow. It’s called Novo Button, One Key Recovery, or One Key Rescue System. You need to turn off the laptop and click on it.
  • If you pressed the correct button, the laptop will start, and on the screen you will see that we are going to a special startup menu:
  • As you probably already guessed, in order to enter BIOS on Lenovo, you need to go to BIOSSetup. After you select it, you will see that the laptop entered the BIOS and you can configure it as you like.

So we figured out how to update the BIOS on Lenovo G500. G580 laptops. As you can see, this procedure is not the easiest one and for an ordinary user it may seem impracticable. However, we hope that the above instructions helped you achieve the desired result.

It can also be found in Dell, Asus and Lenovo laptops. Thanks to the BIOS system, all components of the motherboard can interact with the PC software. However, the BIOS usually differs from manufacturer to manufacturer, despite the fact that they use the same chipset.

installing, windows, lenovo, laptop

This BIOS firmware is intended for motherboards installed in Lenovo G480 (2688, 20156) and G580 (2689, 20157) laptops. To update the BIOS firmware, you need to download it from the “Files” section. Run the downloaded program with administrator rights. It will flash the BIOS of your motherboard. After that, the system should automatically reboot.

Firmware BIOS dump Lenovo BIOS G 580 model 20157

PLEASE if you have downloaded and flashed this BIOS, leave comments, whether it helped you or not!

If this firmware helped to revive your device, please write down in the comments about it.

And if it did not help the same, unsubscribe, for the following users.

  • apsdaemon exe what is it
  • disk unlocker Windows 10
  • generic array creation java
  • lenovo z580 hard drive

How to install Windows 7 on a new laptop (for example Lenovo B70)

Not so long ago I bought a Lenovo B70 laptop with Windows 10 preinstalled. Honestly, I would like to reinstall the system, I prefer Windows 7. But my laptop stubbornly does not see the bootable USB flash drive, I tried to create it in 2 different utilities. Perhaps something needs to be “rotated” in the BIOS for everything to work.

How to install Windows 7 on a new laptop, and is it possible? I saw drivers on the manufacturer’s website for Windows 7.

I should note that even experienced users face certain difficulties when installing Windows 7 on new laptops. Most often, the problem concerns the drivers: they need to be found and downloaded from the manufacturer’s website, since the old ones that came with your laptop. will not work (they are for the new Windows 8/10)! Also, some difficulties may arise with writing a bootable USB flash drive and setting up the BIOS. In general, a lot of the above. solvable, more on that below.

In the article, by the way, I will consider the process of installing Windows 7 on a Lenovo B70-80 laptop (for laptops of other brands and manufacturers, many actions will be similar, unless you have to “figure out” the BIOS setting separately).

Flash drives (using WinSetupFromUSB)

One of the best programs for creating bootable USB drives. this is WinSetupFromUSB. It is in it that I will show you how to quickly and easily create bootable media.

Developer site:

The main features of the utility: Supports most versions of Windows (32 and 64 bit); the ability to write multiple operating systems to one USB flash drive; creating a USB disk that can be loaded into both BIOS and UEFI; pop-up tips at all stages of work; there is a number of programs for working with disks: MULTIpartitionUSBstick, Grub4DOS, SysLinux.

And so, insert the USB flash drive into the USB port and run the WinSetupFromUSB program. Next you need:

  • select a USB flash drive to write an image from the OS to it (see number-1 in the screenshot below);
  • then check the box next to “Auto format it with Fbinst” (attention! All data on the flash drive will be deleted);
  • specify the file system (for our laptop, you can use both FAT 32 and NTFS. If you select FAT 32, the flash drive will be written under UEFI. Almost all laptops are now under this standard);
  • further in the column “Windows Vista / 7/8.” we indicate the bootable ISO image with Windows 7 (note: and “embedded” USB 3.0 drivers);
  • then press the GO button.

Next, WinSetupFromUSB will ask again 2 more times whether to delete all data from the media (just agree).

Then the program will start recording the media. In some cases, this procedure is quite lengthy. On average, it takes 5-20 minutes. The recording status (green bar) is shown at the bottom of the program window. If the USB stick is successfully recorded, at the end you will see a small “Job Done” window.

How to install Windows 7 on Lenovo G50-30 laptop

Hello everyone, earlier I wrote how to install Windows 8.1 on a Lenovo G50-30 laptop, but I am periodically asked how to install Windows 7. Today I will try to tell you my experience in installing this OS. I want to make a reservation right away that before all the installation steps, please update the Lenovo BIOS to the latest firmware.

Typical Windows Installation Problems

The most common among users are two typical mistakes, the admission of which in the process of preparing for the installation of Windows can make it impossible to successfully conduct an upcoming event.

READ  How to connect a printer to a Lenovo laptop

First, the wrong choice of format at the stage of formatting a flash drive.

The note was provided in the instructions for creating bootable media. When using other programs, be guided by the situation. the recommendations remain relevant.

Second, using the wrong boot image. Windows installation discs fall into two categories:

  • bootable. intended for “clean” installation of the operating system;
  • not bootable. they are mainly used to solve various problems and work only from under the Windows interface.

To cope with the installation of the operating system according to the above sequence, the user must correctly emulate the image on a disk / flash drive.

To do this, check the settings in the program for creating a bootable drive for compliance with the presented requirements.

Thus, self-installation of Windows on Lenovo is not overly complicated: you just need to consistently follow the corresponding recommendations. Follow the instructions of the studied manual, be careful at each stage, and everything will definitely work out.

Installing Windows

BIOS configured, boot device prepared. We proceed directly to the installation of Windows. To do this, insert a disk or a USB flash drive into the laptop and reboot the device. The laptop will “figure out” on its own how it needs to boot. As a rule, no additional user action is required. Some models “ask” to press any key to boot from a removable drive. we do it.

We are waiting for Windows to unpack the files, after which we select “Full installation”.

Further events can develop in 2 scenarios:

  • if the hard disk is initially partitioned and the file system is formatted in NTFS, proceed with further installation;
  • if the system is CDA, we first delete the hard disk partitions. To do this, click the “Disk Setup” button and delete the partitions one by one.

Here we can divide the free space into several partitions. To do this, press the “Create” button, indicate the desired size (for the system, it is better from 30. 60 GB) and confirm our actions. Repeat until we allocate all available hard disk space.

Highlight the section dedicated to installing the operating system, and click on the installation. There will be no further features requiring detailed individual consideration. You need to follow the instructions of the installer.

The computer will restart several times. At the same time, there is no need to “touch” it. the system will do everything by itself. You just have to choose the language you want, set the date / time settings, set the username and password.

Installing Windows 7

And so, the bootable media is ready, the drivers are preloaded, the backup is done. Now you can start installing.

Windows 7 (as mentioned above) does not see USB 3.0 ports (they are marked in blue). Therefore, insert the USB flash drive into the USB 2.0 port (the difference is shown in the photo below).

Another case in point: USB 2.0 and USB3.0

Further on laptops Lenovo B70 there is a special button to enter the BIOS and call the boot menu (Boot-menu). It is located next to the power plug, on the left side of the device. Click it (photo below).

Lenovo B70. a button to enter the BIOS next to the power input. It is most convenient to press with a pencil or pen

By the way, on some laptops this button may be next to the power button (photo below).

Lenovo G700. button to enter device settings (including BIOS)

For those who have a great laptop from the one in question. I recommend that you read the article about calling the Boot-menu.

Lenovo Ideapad 320 Laptop | USB Boot & windows 10 installation

Next, the “Novo Button Menu” should appear. in it we select the third item Boot Menu.

Then we select the device from which we will boot. In our case. this is USB DISK 2.0.

Please note that if you have created a bootable DVD, then you need to insert it into the drive tray, then turn off the laptop and turn it on using the button to enter the BIOS (see above in the photo). Otherwise your boot disk. it will simply not be in the list of devices and you will not be able to select it.

Next (if everything went well) a GRUB4DOS window should appear, in which you need to select a boot option. select the first one with the line “Windows NT6 (Vista | 7.)” (as in the screenshot below).

If you used a USB flash drive (and it is recorded correctly). You should see the Windows is loading files start loading (installation has started.).

Those who install from disk. do not miss the moment when on the screen there is only one message “Press any key to boot from CD or DVD.” at this moment, to start installing the OS, you need to press some key!

Those who have an error at the beginning of the installation or the USB flash drive / disk is simply not visible in the boot menu

In most cases, the problem lies in the BIOS settings (support for older operating systems that do not support secure boot is not enabled). Therefore, you need to go to the BIOS settings. on a Lenovo B70 laptop, you can use the same arrow button on the device case for this (only when the menu appears, select not Boot Menu, but BIOS Setup).

Instructions on how to enter BIOS.

(for those who failed, or another laptop model)

In the BIOS, open the BOOT section and set the following parameters:

  • Boot Mode (boot mode). [Legacy Support] (support for old OS);
  • Boot Priority. [Legacy First]. boot priority;
  • then go to the Exit section and click the “Exit and Save” button (save and exit, this is also achieved by pressing the F10 button).

After that, call the Boot Menu again, select boot from a flash drive (disk) and start the installation. I think there shouldn’t be any problems now.

DVD (using UltraISO)

To write an ISO image from Windows 7 to disc, in my opinion, it is best to use the UltraISO program.

Official website:

One of the best software for working with ISO images. Allows you to write them to disks, flash drives, edit (add and remove files from them), emulate, etc. In general, an indispensable thing for everyone who often has to deal with ISO.

After launching the UltraISO program, the first thing to do is to open the image with Windows 7 in the program itself. To do this, press the CtrlO key combination, or click File / Open.

Then press F7 or Tools / Burn CD Image. Now you need a regular 4.5 GB DVD.

Insert the disc into the drive tray and press the record button. In principle, you do not need to enter or change any settings.

The recording time of a standard DVD is about 10 minutes (the entire recording time will show a green bar with the status of the process).