How To Reset Lenovo Laptop To Factory Settings

Reset Acer laptop to factory settings

To restore Acer to factory settings, turn it off and then turn it back on by holding down the Alt key and pressing the F10 key about once every half second.

The system will ask you to enter a password. The default password is 000000 (six zeros). Select Factory Reset from the menu offered.

Alternatively, your Acer laptop can be reset to factory settings using the Acer eRecovery Management utility.

Factory reset Toshiba laptop

To restore factory settings in Toshiba, do this: press and hold the 0 (zero) key on the keyboard (numeric keypad on the right).

Turn on your laptop. Release the 0 (zero) button when it starts to sound. Then a program will appear that will allow you to restore the laptop to factory settings. You just follow the instructions and follow the directions.

Of course, the written recommendations are far from ideal (you can additionally ask in the comments. I always answer).

Fully detailed with all pictures, can only be described for one specific model.

In this post I wanted to describe the options for all models. How did you decide.

However, if something is not clear. write in the comments and I will give you a detailed answer. Success.

3 Proven Ways to Reset BIOS on Any Laptop

In general, if you need to reset the BIOS settings in a laptop, little depends on the name. almost all of them are lonely. For example:

  • Asus (ASUS), x550c, k50c, h81m k, k551l, x552cl.
  • Lenovo (Lenovo) 10160, v570c, c260, g580, g50, g570, b590.
  • Hp pavilion, 620, g6 1210sr, 4510, compaq nx6325, MSI z77a g43.
  • Samsung (Samsung) np355v5c, np350v5c, rc530.
  • Acer aspire (Acer) v5 471, v3 771g, v3 571g, 5742g, 8951.
  • Dns (dns) 0170703, dell, packard bell, sony vaio, vgn ns31er.
  • Toshiba satellite (good) a60, prestigio 141a03 shell, MSI h110m pro vh.

The difference may be in the manufacturer of the BIOS, if you need to reset to factory defaults from the manufacturer.

In the same way, it is completely independent of the version of Windows: windows 7, Windows 10, windows 8 or xp are the prerogative of the BIOS itself.

Below we will consider several options for what you will do, including by laptop model.

The second way to reset the BIOS in a laptop is with a jumper

The second way is to reset with a jumper that is close to the above battery.

The jumper is described as “CLEAR CMOS”, “CLR CMOS” or “RESET BIOS” depending on the motherboard installed in the computer. The appearance of the jumper also depends on the laptop model.

By default, it Closes two contacts. the first and the second. To reset the BIOS, you need to close the second and third pins, wait a few seconds and move everything back to its original position.

If you do not have a jumper, you can use a regular screwdriver holding it in this position for several to tens of seconds (the longer, the better).

How To Reset Lenovo Laptop To Factory Settings

The third way to reset the BIOS in a laptop to factory settings by entering it

In this method, you need to enter the BIOS and find the “Load BIOS Default” term in the settings. This will restore the default or factory settings.

You will have to confirm your choice with the “Enter” key, and sometimes the settings with the “F10”.

To enter the BIOS, you need to press the “Del”, “Esc” or “F2” key immediately at startup, although other options are also possible.

Please note that newer versions of laptops may NOT have a text screen, but a graphical one. But in general, the scheme is general.

Next, select the desired menu item. usually it is called “Set BIOS Default” or “Use Default Settings”.

Select it and press “Enter”, and then confirm my decision. press “Yes”. Basically, how to enter the BIOS, and how to reset it. all this is also in the documentation for the laptop.

As mentioned above, often the BIOS reset on a laptop must also be confirmed by saving. that is, select the menu item. “Save Exit”, save everything, and then reboot.

Reset Asus Laptop to Factory Defaults

To do this, immediately after starting the PC, press the F2 key to get into the BIOS settings.

Next, use the arrow keys to go to the “Boot” tab, select “Boot Booster” and put “Disabled”, then save the changes and exit. The laptop will automatically restart.

In Some Asus, to return to factory default, turn it on and press F9, you should see a boot screen.

The recovery program will prepare the necessary files and you will be prompted to restore the factory settings. All your data will be deleted.

The recovery process will then be done automatically, without user intervention. The laptop will restart several times during the recovery process.

The first way to reset BIOS settings in a laptop is to remove the battery

There is a small battery on the laptop motherboard that powers the CMOS chip. When it is discharged after several years, the laptop does not remember the date, forgets the settings and, in some cases, refuses to work at all.

If you pull it out, you can instantly reset the BIOS, just unplug the power cord and pull out the battery.

Then unscrew the housing cover, then carefully move the small mounting bracket with a match or a toothpick and the battery will pop out of the slot.

Typically a 3V lithium battery labeled CR2032 (costs about 5).

WARNING: In CMOS notebooks, the battery is sometimes soldered. In this case, it is better not to touch it, but use the following method.

If your laptop is modern, then you may not need to unscrew anything. Turn the laptop upside down and see if the comments are “CMOS”.

If there is, then there should be a hole nearby. Put a paper clip or something in it and hold it for about ten seconds.

Factory Reset Samsung Laptop

In Samsung, to restore to factory settings, you can run the Samsung Recovery Solution utility if you have NOT removed it.

Press the F4 key to start restoring Samsung factory settings. Then follow these steps:

Checkpoint “Restore”. Select “Restore Full”

Select a restore point to restore your computer to factory state. You will be prompted to restart the laptop. answer “Yes”, then follow the instructions.

Reset HP laptop to factory default settings

To return to factory defaults in HP, Turn off your laptop and disconnect everything connected to it.

Press the F11 key while starting the laptop and hold until it appears, HP Recovery Software. Recovery Manager.

Select “System Restore”. You will be prompted to save the data you need, you can do this.

After completing the recovery process, you receive HP with Windows preinstalled, all HP drivers and software will be installed.

How do I reset my laptop to factory settings? Instructions for restoring factory settings

How do I reset my laptop to factory settings and why do I need it? Such actions may be required in several situations, for example, if there are any failures that interfere with the operation of the operating system, as well as if Windows is “clogged” with unnecessary programs, old drivers and various components. Such reasons can lead to the fact that the computer will run much slower, and sometimes resetting the BIOS will solve the problem of locking Windows.

Instructions

So, when the button is found, you must first turn off the laptop, and then, instead of the power button, press the Novo Button. A menu will appear on the screen, in which there will be an item System Recovery.

This program will be useful if the user is interested in how to return the laptop to factory settings. Windows 7 and higher will also be able to create backups through a utility from “Lenovo”. If there is one, you can roll back the system to it by selecting the Corresponding item in the next menu. If there are recovery points, then click “Restore from original backup”.

The program has a very user-friendly interface that is intuitive even for a novice user. After the restoration is complete, you will need to re-enter all user data, as after purchase.

Then, having installed all the necessary drivers and programs, you can make a restore point and next time restore the system to it.

Almost all modern devices, be they tablets, phones or laptops, are equipped with a hidden interface for factory reset and this manufacturer is NOT an exception. How to reset your Dell laptop to factory settings?

They have a “magic button”, as in “Lenovo“, but everything is not so difficult, even a beginner can handle it. First, turn off the computer, and after turning it on, when the Dell logo appears on the screen, you need to hold down the F8 key if the operating system is Windows 7 or later, or the CtrlF11 combination if it is XP. A window with advanced OS boot options should appear. Then, using the keys, you must select the interface language, and then click “next”.

READ  What To Do If You Forgot Your Laptop Password

The utility will prompt you to enter your username and password. The same data that users use to log into the system. Next, you need to select the item with the restoration of the factory image (Dell DataSafe Restore and Emergency Backup) and again “next”. The next window offers the option “Restore your computer”, and you should click it, and then “next” again.

If there is a restore point, you can try to boot from it, but if there is one, in the new menu, the utilities will offer only one copy of the operating system. Factory. You need to select a restore point without saving files and click “next”.

The last request of the program will be to confirm the action; you must also select “Yes, continue” using the keyboard. This will initiate a factory restore procedure. Usually the process takes up to twenty minutes. When finished, the laptop will automatically reboot and the user will be prompted to configure the operating system.

Result

Before you restore factory settings on a laptop, you need to know where this will lead. Firstly, all user files are deleted, although in some cases only the system disk is cleared, it is nevertheless necessary to back up all essential data. Secondly, the system partition is formatted, and the operating system is automatically reinstalled (programs and user drivers are removed), without the need to enter a key.

Each manufacturer has its own BIOS recovery scheme. How to return an Acer laptop to factory settings? In fact, everything is much SIMpler than on second-party computers, everything will take just a few minutes. First you need to turn off the computer, and then turn it on while holding down the Alt key. At the same time, you should press F10 with a frequency of two clicks per second, after which the system will invite a password to the user. If this device has never been restored to factory settings in the past, then the password is standard: six zeros (000000). Next, a menu will appear, in which there will be an option to reset the settings to factory settings (in the English version Factory reset).

However, there is another way how to return your laptop to factory settings. Windows (7, Vista or higher) bundled with Acer devices has a special utility called eRecovery Management. You should look for it in the programs preinstalled by the manufacturer. After starting, you need to use the “Recovery” tab.

Toshiba

How do I return a “good” laptop to factory settings? The Rollback instruction can also be considered one of the SIMplest. First you need to turn off the laptop, then press and hold the “0” button on the keyboard. It should be noted here that the key from the numeric pad located on the right side of the keyboard, and will not work.

With the “zero” key held down, turn on the computer. When a characteristic beeping is heard, the button can be released: the launch of the recovery utility is initiated, you can SIMply follow its instructions.

To restore factory settings on HP computers, you must first turn off the laptop and remove all memory cards, removable hard drives, and other devices. Then turn on the computer and press the F11 key on the keyboard until the recovery environment is loaded on the screen. A system utility from HP called Recovery Manager (you can also launch it directly from the operating system by clicking on the shortcuts in the list of programs).
After downloading the utility, you must select the System Recovery item. System restore, after which the user will be prompted to save any data. If the prerequisite for resetting the settings was the infection of the computer with viruses, then it would be better NOT to save any data in order to prevent the problem from recurring in the future.
The recovery process starts automatically and does not require user intervention. In this case, the computer may restart several times.

After the process is complete, the laptop will return to its factory state, it will have HP branded drivers and programs installed, which you can leave or uninstall.

Lenovo

Here is another company that supplies with the operating system a bunch of unnecessary programs that slow down and clutter up the operating system, but among them there are utilities like the one described above from Acer, it is called OneKey Rescue System. But if you can’t log in, how do I reset my laptop to factory settings? Lenovo equipped their devices with special buttons to enter the BIOS environment, by the way, this is a feature of all laptops from this company: BIOS is loaded only after pressing a button, no keyboard shortcuts.

The so-called Novo Button. Quite a characteristic small round button with a round arrow icon turned to the left. It is usually located next to the power button, but it can be near the power input, and in the Yoga family it is located on the left side, between the headphone jack and the volume control.

When cannot be restored

How do I reset my laptop to factory settings if the operating system has been reinstalled? Unfortunately, in this case, this cannot always be done. After purchasing devices, many reinstall the operating system that comes with the kit, along with this, delete the files necessary for recovery from the hard disk. If the hidden recovery partition is deleted, then you will not be able to reset the laptop to factory settings.

However, even in such a situation there is a way out: for example, everything you need can be on the disks that come with the device. You can search for images of recovery partitions on the Internet, in particular on torrents. In addition, a recovery disc is available for sale on the official websites of manufacturers.

Computer repair

Quite often, people call computer wizards who reinstall the operating system. As a result, the recovery partition will be deleted from the computer, and the next time the user will have to call the service again and pay money for what he could do with the help of the recovery utility. The program will automatically install the operating system, which will also be licensed, with all factory drivers and programs.

Therefore, before contacting the service, you should try using the built-in recovery partition, this sometimes saves not only money, but also time. Everyone needs to know how to restore factory settings on a laptop, because after mastering SIMple instructions, the owner of the device will be able to return it to a clean state at any time.

Let’s deal with the second option:

  • Go to the BIOS on the “Main” tab and check that the “D 2 D Recovery” option is “Enabled”.
  • Press Alt F 10 at startup until the “Acer Recovery Management” utility window appears. On some laptops, the program can be launched through the “Troubleshooting” section in the boot options menu (more on this below, in Toshiba laptop recovery).
  • Select “Restore factory settings”.
  • Read the important information about the rollback process and click Next.
  • Confirm your desire and wait until the end of the recovery procedure.

On Windows 8.1, the interface of the recovery utility changes. Here, in the “Diagnostics” section, you will have to select the “Reset to original state” item. The order of Rollback is not very different, in addition, all steps are described in detail in Russian, so you will quickly figure out how to return the Eiser laptop to factory settings.

Nothing complicated here either:

  • Press the F 3 key immediately after turning on until the Windows Boot Manager window appears on the screen.
  • Hit Enter. To start “Windows Setup”.
  • Select the “MSI Recovery Manager” utility.
  • Click “Ok” in the warning window and wait for the system rollback to complete.

This is everything you need to know about how to factory reset your MSI laptop.

Resetting your Toshiba laptop to factory settings:

  • Turn off your laptop.
  • Press the number “0” and hold the key.
  • Don’t let go of the key, turn on your laptop.
  • When the computer starts beeping, Release “0”.

The program Restore the parameters to the factory state will appear on the screen. you need to follow all the instructions of the restore wizard.

But how do you return Toshiba’s laptop to factory settings if you have an older model? Here you will have to use the section “Troubleshooting”, which can be selected in the menu of additional boot options (F 8 key when turning on the computer).

  • Select Toshiba HDD Recovery among the recovery tools.
  • Press “Next” until the program does NOT start the rollback procedure (it is advisable to read the information provided).
  • Provide username and password and set date and time.

After a short wait, you will see the system again in its original, factory condition.

If you are looking for how to reset your Dell laptop to factory settings, you can follow the instructions above (via Troubleshoot).

Lenovo

To understand how to reset a Lenovo laptop to factory settings, you first need to find a small OneKey Rescue button on the laptop, which is responsible for launching the recovery utility.

Samsung

It was the turn of the South Korean manufacturer and the answer to the question of how to return a Samsung laptop to factory settings.

Factory Reset Samsung Laptop:

  • Press the F 4 key while turning on the computer.
  • Accept the license agreement and go to the “Recovery” section.
  • Run Full Recovery.
  • Specify breakpoint (earliest by date, factory default).
  • Start the rollback procedure and wait for it to end.
READ  How To Use Skype On A Laptop

You figured out how to reset a Samsung laptop to factory settings, so you can forget about the need to reinstall the system.

The turn of the next manufacturer has come: let’s see how to return an HP laptop to factory settings.

Resetting your Asus laptop to factory settings:

  • Turn on the computer and hold the function key F 9 until the “Boot Manager” menu opens.
  • Run “Windows Setup”.
  • Check the “Restore to the first partition” option.
  • Click “Finish” to start the system rollback.

You don’t need to press and enter anything else. the recovery utility will figure out how to return your ASUS laptop to factory settings.

By the way, pressing the F 9 key when turning it on for the first time will NOT lead to anything, since the “Boot Booster” function is activated by default in ASUS notebooks. It must be disabled in the BIOS. To do this, enter the BIOS, in the “Boot” item, set the parameter value to the “Disabled” position.

Let us continue with the story of how to reset your Acer laptop to factory settings. You can perform this procedure from a running Windows (the utility is called “Acer Recovery Management”) or through the recovery tools.

Then follow these steps:

  • Press the “OneKey Rescue” button on the turned off laptop.
  • Select the “OneKey Recovery” function.
  • Check the box “Recover from original copy”.
  • Read the recovery details and click “Start”.

Wait for the rollback procedure to complete and be sure to restart your computer for the new configuration to take effect. The answer to the question of how to return a Lenovo laptop to factory settings has been received, but there are still other manufacturers, so let’s move on.

Toshiba

Now let’s figure out how to return a Toshiba laptop to factory settings. In the latest models, launching the recovery utility is quite SIMple.

How to reset your laptop to factory condition: Lenovo IdeaPad

I have already talked about how to return to the original state from the system recovery section of ThinkPad notebooks from Lenovo. Now the turn has come to Lenovo IdeaPad laptops, where the procedure for returning to factory settings is implemented differently.

By the way, if my memory DOES NOT cheat on me, the recovery of the budget Lenovo Essential series laptops is exactly the same as the IdeaPad, although I’m not one hundred percent sure. When I can verify this, I will add more specific information at the end of this article. Well, if one of the readers knows for sure, please unsubscribe in the comments.

Before proceeding with the procedure for restoring Lenovo IdeaPad laptops, as usual, I strongly recommend that you first read the introductory article “How to restore a laptop to the factory state: introduction”, which provides basic information on how to restore laptops to their original state from the system recovery section, as well as necessary measures to be taken so that no fundamental data remains.

I also strongly advise NOT to start system recovery, Until I read this article to the end. You never know what nuances may arise.

So, to launch the recovery system for Lenovo IdeaPad laptops, use the OneKey Rescue system launch button, with which the system is reanimated from the image stored in the system recovery partition.

By the way, with its help, you can restore a computer from a self-created backup, as well as check it for viruses, but since this article is about returning the computer to the factory state, I will not consider these possibilities here.

The location of the OneKey Rescue system launch button may vary, as may its appearance. Depending on the specific model, it can be located on the case or display frame, be external or recessed. It doesn’t matter at all. The important thing is that pressing it will launch the recovery system.

OneKey Rescue System Launch Button on Various Lenovo IdeaPad Notebook Models

The procedure for restoring Lenova IdeaPad laptops can be started both on a turned off computer or from under the operating system. We will consider the most neglected case in which the operating system is damaged so much that the computer does not boot.

Press the OneKey Rescue system button while the laptop is off. The computer will turn on and after a while a start menu will appear on the desktop, in which we will need to select the OneKey Recovery function.

The first step is to choose whether we want to return the system to the factory state or restore it from a user backup. Choose the first option and click “Next”.

In the next picture, we will be shown information about the recovery options and warned that we DO NOT turn off the laptop power at the end of the procedure. Turn on your mustache and press “Start”.

We will be asked if we really want to return the system partition to its original state. We answer “Yes”.

We will be warned that in this case all data stored on the system partition will be destroyed. If you strictly followed the recommendations of the article “How to return a laptop to factory state: introduction”, then there is nothing to fear. Click “Yes”.

At this point, the Lenovo IdeaPad laptop will start recovering from the recovery partition. This process takes some time. Do not press anything or under any circumstances turn off the power to the computer.

At the end of the procedure, a message appears on the screen that the system restore is complete. Click OK.

Click the Finish button.

Next, we will be asked to turn off the computer or restart it. What to press is up to you, but the system restore will only be completed after a reboot. Therefore, if you want to complete the recovery right now, click “Restart”, and if you do not mind taking a break, select “Shutdown”.

After turning on the computer, preparation for the first start of Windows starts automatically. Wait until the system language selection menu appears on the screen.

This article in restoring Lenovo IdeaPad laptops to factory settings has come to an end.

If my article turned out to be useful to you, please recommend it to your friends using the social media buttons or SIMply by sharing the link.

How to reset a laptop to factory settings?

Your laptop is like new.

Sometimes the speed of Windows, and therefore of your laptop, can slow down as a result of software bugs or even malware. If this happens, the best and most effective solution is to erase everything and start from scratch, reinstall Windows.

You can start from scratch in different ways, as a rule, the options differ depending on the manufacturer, which produces your laptop. Most laptops include a Windows installation DVD, but if your computer comes with Lenovo or HP, you will have to follow the second process, which is a factory reset.

Boot options

Turn on the laptop and press [F8] until a menu titled “Advanced Boot Options” appears. Select “Repair your computer” at the top of the list and press the [Enter] key. Typically, your computer repair software will start immediately. If not, continue navigating the shortcuts, using the keyboard, to the point where you will need to select and specify a Windows username and password, if necessary, specify the Corresponding password.

You will now see a menu called “System Recovery Options.” This is the last step to activate the firmware to help you reset your laptop to factory settings.

On Dell laptops, this section will probably be labeled Dell DataSafe Restore, HP calls it Recovery Manager, and Sony laptops call it VAIO Recovery Center.

Resetting Laptop to Factory Settings: Problems

The easiest way to restore a laptop from a reputable manufacturer such as Dell or HP is to factory reset it to use a saved version of Windows that you can find hidden deep in your hard drive.

But what if this copy of the operating system has been damaged or deleted by a virus or some other malicious software?

Fortunately, it is most likely that your laptop came with one or more System Recovery DVDs as a backup method to restore the image that was stored on the hard drive. Installing a suitable disk into the laptop drive, and then starting the laptop by pressing the [F12] button will help start the process of resetting to the factory version of the system, as described above.

Downloading recovery files

Sometimes laptop manufacturers, in order to save a few tens of rubles, instead of including a bootable disc in the standard package, ask you to burn your own disc to restore the system when you first log into the computer.

If, like us, you find this solution too tedious the first time you start your system, don’t worry, most manufacturers will send you the correct recovery discs. However, the cost and duration of this procedure varies from manufacturer to manufacturer, and it can be quite troublesome. For this reason, we recommend that you avoid jumping over potentially expensive hoops and visit the manufacturer’s official website where one will hopefully host a system image that you can download and use to reset your laptop.

Factory reset Lenovo laptop without password

Welcome dear friends to my website! In today’s article, I am going to show you two methods of factory reset on Lenovo laptop. Resetting a Lenovo laptop to factory settings is easier than any other manufacturer’s laptop. Proprietary software “OneKey Rescue System” (sometimes also called “OneKey Recovery”) built into Lenovo laptops Intuitively understandable even for a novice PC user.

READ  Which Laptop Is Better For Studying In The Institute

If you are unable to reinstall the system, then there is only one way: reset your laptop to factory settings. However, if you forget the administrator password, the factory reset will NOT work. In today’s article, we are going to talk to you how to reset Lenovo laptop to factory settings without password? This article will show you how to use the OneKey feature and get your laptop back on track.

These methods apply to Lenovo ThinkPad, IdeaPad, YOGA laptop models

Method 1 Using Onekey Recovery to recover Lenovo laptop.

The first thing to do is find the recovery button on your Lenovo ThinkPad / IdeaPad / YOGA laptop. In most cases, you can find it on the right / left side of your laptop, or at the top of your keyboard, next to the power button. If you find the recovery button, please go to Step by step instructions to recover your Lenovo laptop.

  • Turn off your Lenovo laptop. If you cannot disconnect it normally, you can remove from the battery and then reconnect it.
  • Connect power supply to Lenovo laptop, press NOVO key (recovery key) for 5 seconds.
  • When the Novo-Button pops up a menu, click the Down Arrows to select the “System Restore” option and press the “Enter” key. To enter the recovery environment.
  • On the onekey Recovery mode, select “restore from original backup” and then click on Next.
  • Click on “Start” and click “Yes”. When the puppies message request to start the recovery process.
  • Wait for the system restore process to complete and then follow the onscreen instructions to configure the Windows settings of your Lenovo laptop.

If there is no Onekey Recovery button on your Lenovo laptop, or you have a clean installed system on your laptop and your system disk is missing, and the recovery file is deleted or destroyed, this method will not work for you.

Use a disc Setup / Repair to reset Lenovo laptop to factory settings

For Lenovo laptops with Windows 10 / 8.1 / 8 operating system, there is an easy way to return to factory settings by pressing the “shift” key and click on the “Restart” button.

But along the way, you will need to select a User account and enter a password to Get a reset of privileges. If you forgot your laptop password, this method will NOT work for you. However, you can Get help with the setup / repair disk to bypass the password requirement.

The setup / repair disk Not only helps you reinstall / repair your system, it can also help you get into Windows recovery environments. The steps below will show you how to use the settings / repair disk to reset your laptop to factory settings without a password.

  • Connect Setup / Repair Drive to Lenovo Laptop.
  • Install Lenovo Laptop to boot from setup / recovery disc. If your laptop cannot boot from a removable device automatically, you may need to press the F2 (or F1) key to enter the UEFI (BIOS) settings, to change the boot order, to set your laptop to boot from USB and CD.
  • If it boots from the installation disk, you will see the setup screen, click on the Next button.
  • Click on the “System Restore” link on the bottom left of the screen.
  • Click on “troubleshoot” on the select screen.
  • Click on “reset this computer” on the troubleshooting screen.
  • There will be two options to choose from: “keep my files” and “delete all”.
  • Select the “delete all” option to delete all of your personal files on the system drive, or it will not help to remove the forgotten password from your user account. If you do not need to delete the User account and password, select “Save My Files” to save your personal files.
  • Select Windows system.
  • Select the drive that you “update”, “the only drive where Windows is installing”, or “all drives”.
  • There are also two options to choose from in the next step: “just delete My files” or “completely clean up the disk”. Choose the right option according to your needs.
  • Finally, click on the “reset” button, this will start the reset process.

Article author’s advice: Before resetting the settings, make sure that your important data is saved, once it is deleted, it can no longer be recovered from your computer.

Ways to reset Windows 10 to factory settings

Windows 10, like any operating system, may not work correctly. When the number of errors exceeds all acceptable standards, and the computer starts to slow down, there is a logical desire to reset Windows 10 to factory settings. Fortunately, you don’t have to reinstall the system again for this. you can just use the special recovery tool.

! Attention. Some site users wrote in the comments that when performing the reset procedure, they encountered errors and the system stopped loading.

I tested the factory reset tool several times on test systems and concluded that this problem occurs on certain builds of Windows 10. For example, I got SIMilar errors when testing build 10240, but on build 10586 everything worked without problems. The build version can be checked by running the winver command through the Run window (Windows R key combination).

Based on the above, I strongly recommend that you back up Windows by creating a system image, restore point, etc. before performing the factory reset procedure.

System does not boot

We figured out the launch of Rollback settings in Windows, but how to reset the settings if the system does not boot? In this case, you will have to use bootable media with the Windows 10 distribution.

  • Connect the installation flash drive (disk).
  • Set boot from connected media via Boot Menu or BIOS.
  • Click on the link “System Restore”.
  • Go to the “Diagnostics” section.
  • Click on “Revert”.

Further, the same windows will appear as when starting the reset in the Windows environment. The only difference is that another authorization window will be added, where you must specify the password for the account.

Rollback to the original state

After upgrading to Windows 10 within 31 days, there is an option to quickly rollback to the previous version. If a month has already passed, or you performed a clean installation with partitions formatted after the upgrade, then the quick rollback function will disappear, since the Windows.Old folder (which contains the files of the old system) will be deleted.

How do I return my computer to its original state in this case? Take advantage of the special Windows 10 settings feature:

  • Expand the Start menu and launch Settings.
  • Go to the Update Security tab.
  • Open the “Recovery” section.

There are two functions in the “Recovery” section. to return the computer to its original state and to launch special boot options. You need the first factory reset tool.

Do NOT require bootable media when downgrading. The procedure involves files that are stored on a special section (its size is about 500 MB).

To start rolling back, click “Start”. The window for selecting the return to original files mode appears. There are two options:

  • Save files. All apps and settings will be removed, but user files will remain.
  • Delete everything. All information will be erased from the hard drive, including your files.

In order not to suffer from overwriting information to other media, select rollback with saving files. Device preparation begins.

After completing the preparation, a complete list of programs will be displayed, which will be uninstalled as a result of a system rollback. The list will include all the applications that you have installed (browsers, games, image editors, etc.). If you agree, click “Next”.

On the next screen, read the reset wizard carefully during the rollback procedure and its consequences. If everything suits you, click the “Reset” button.

After starting the rollback procedure, the computer will restart. Your participation is NOT required anymore, since the machine will perform all the necessary actions on its own. After successfully completing the factory reset, you will receive a new system without unnecessary programs and settings, but with your files.

If you specified the mode of complete deletion of data, then at the end of the rollback procedure, you need to specify the system operation parameters, and also create an account. After completing Rollback, you will get a completely clean system.

Factory reset on a laptop

The laptop has an additional built-in reset tool that allows you to quickly and without unnecessary settings roll back the system to its original state.

Important: For the System Rollback tool to work, you need a partition with backup files. If you deleted it, formats the disk during installation, then you will NOT be able to return to its original state.

Depending on the manufacturer of the laptop, the reset tool is launched in different ways:

  • ASUS. press the F9 key while starting the computer until the recovery program window appears.
  • HP. F11 key, Until Recovery Manager appears (you can run the program in Windows).
  • Acer. AltF10. The password for running the recovery utility is 000000 (six zeros). ERecovery Management also runs in Windows.
  • Samsung. F4 key at boot.

Since the Windows 10 installation automatically turns on Quick Start Mode, you need to disable it in the BIOS before pressing the above keys. On the “Boot” tab there is a “Boot Booster” parameter. set it to “Disabled” and save the configuration.

Alternatively, turn on your laptop and then restart it. After rebooting, start pressing the desired key, the factory reset utility should start. There is nothing complicated in working with it: usually the interface is completely translated into Russian and contains only one function. reset to the original settings.