In SAM system
On the seventh version of the Windows operating system, as well as on XP, the SAM system is used to store keys and usernames. All information contained in it is reliably protected from hacking. Therefore, in order to find out a forgotten password, you will have to spend a lot of time and effort. However, there are simpler ways to hack. And their main essence is to reset the password and replace its values with new ones. That is, you will not be able to unravel the old information about the “Admin” or “Guest” user, but you will be able to enter the computer after the first reset. To do this, you will have to use several programs, in which we will tell you a little later.
It is also worth noting that when the OS is running, you will NOT be able to “get into” the password store and change any information there. That is why programs for resetting keys must be loaded from another computer to a separate DVD / CD-disk or to a USB flash drive.
Are there any risks?
There are no risks when resetting the comment password, even if you use this method for the first time. Files, folders and data after that will not disappear, as when uninstalling the operating system from the C drive. After resetting the password, you will see the same familiar desktop with all the saved shortcuts. That is, you touch the bowels of the system (SAM key file), even by intuitive actions you will not harm your computer. Everything is very simple and safe.
Now about utilities
The most famous program for resetting passwords on Windows computers is the Offline NT Registry and Password editor. This utility is capable of working with almost all operating systems. This is XP, Vista, and Windows 7.
What to do with the command line?
Boot from the removable media of the program and select the number of the partition on which your “operating system” is installed. If an error occurs, you will have to start the computer again. Next, the program will ask you to specify the path to the folder where the key storage file is located (that is, to the SAM system). A line like this should appear here: X: / Windows / System32 / config. This is the path to the password file. If the line is NOT fully appended, complete it with the appropriate characters. Now select the item called Password reset (it is the first in the list).
Then everything will be simple. After Password reset, select Edit user data and password. He is also the first on the list. Now here you need to enter the username or his identifier in the format 0xabcd. The last 4 digits are the RID listed in column I. It will be useful to us if the username (user) is displayed incorrectly or the Ego cannot be entered correctly.
Now click on item 1. password reset. You can also change it. To do this, select section number 2 “password change”. Then press simultaneously the sign “!” and the enter key. So you are exiting edit mode.
To remove the Windows 7 administrator password, then enter the character “q”, press enter, then “y” and the enter key. Everything. The password has almost been cleared. To exit, enter “n” and Remove the flash drive or disk from the drive. Next, let’s make a combination AltCtrlDel. with this command you will restart your computer. Everything. Windows 7 account password successfully reset! In time, all this work will take you no more than 1 hour along with downloading and installing the program.
What do we need for this?
All you need to have is the original operating system installation disc. It is from him that we will boot and restore / reset protection in the SAM system.
So how to remove password from Windows 7? To do this, we need to boot from the installation disk and press the ShiftF10 key combination. So we’re calling the team deadline. Here you need to enter the value “regedit” and press the enter key.
After the registry editor starts, you need to go to the HKEY_LOCAL_MACHINE section. To do this, select “File”. “Load bush.”. On the English version of the installation disc, it will look like this: File. Load hive. Now open the SAM file. It is located in the folder at / Windows / System32 / config (that is, where the operating system is installed). When you open SAM, the computer will prompt you for the value for the hive to load. Here you can type any combination of symbols and keys.
After that, select the section, which is located at KEY_LOCAL_MACHINE / hive name / SAM / Domains / Account Users / 000001F4. In this case, double-click the right mouse button on the F key. An editor will appear on the screen, in which you will need to go to the I number of the time frame 038 (this is the number 11). This value should be changed to 10. No more data should be changed. Other numbers cannot be added or removed. To disable the password on Windows 7, select the “HKEY_LOCAL_MACHINE / hive name” hive next. Then select “File” from the menu. Unload Bush. On English versions of Windows, select File. Unload hive. Now confirm unloading the hive and restart your computer. First you need to remove the installation disk from it.
But that is not all. To reset Windows 7 password, follow a few more steps:
- Log into the system under the Admin account.
- In the control panel, select the “user management” section. Here you can remove Windows 7 password.
- Change a forgotten password to a new one or reset it.
It should be noted that here you can change the key not only on the administrator account, but also on other accounts.
How to remove password from Windows 7? How to remove or reset Windows 7 password? What to do if you forgot your password?
All passwords, especially complex ones, are often forgotten by us. Sometimes it happens that we write down their meaning only on a piece of paper, which is soon simply lost. In general, the situation is typical. Newbies are sometimes frightened by the fact that it is impossible to enter the system if they forget the password. They don’t know what to do in such cases. Formally, you cannot enter the system without a password (if it is set and enabled), but this situation can still be corrected. How exactly to do this, you will learn from our article. So how to remove password from Windows 7?
How to bypass Windows 7 password? Method number 3
This is perhaps the most difficult method of resetting key data from a SAM file. And all the complexity and danger lies in the fact that here we will deal with the substitution of system files.
As you know, each Windows has a default Sticky Key function. Sooner or later, everyone encounters it. if you press the Shift button on the keyboard five to eight or more times, a short, but very nasty sound will sound from the speakers, and a small window will appear on the screen.
This window belongs to the sethc.Exe utility program. The latter is at the heart of the OS system directory. It also launches on the welcome screen, namely when you are prompted to select a user account and enter a password. You can replace this useless program with something more interesting, for example, cmd.Exe (command line). Naturally, It will not appear every time you start, but only if you boot from the installation disk and press the ShiftF10 key combination.
How to use it?
Before removing the Windows 7 password, you need to have access to a second computer that does not use security keys or you know their values. It is a laptop or a stationary system unit. Never mind. The main thing. So that he has access to the Internet. So, we go to the world wide web and enter the key in the search engine (for example, download NT Registry and Password editor). Download the program and save the exe installer to a USB flash drive or disk. After you’ve burned the image to disk, you can start resetting your password. Unfortunately, this program does not have a graphical interface, but the concepts of its operation are not very difficult.
How to remove password from Windows 7? Method number 2
Here is another variant of password reset on the Windows 7 operating system. To do this, you will have to prepare an installation disk with “Windows” in advance. In this case, you will enable the hidden administrator account by editing the registry from the OS installation environment. In the future, you can log into the system under this account and edit at any time information about the passwords of any account that is registered on this computer. This will save you a lot of time. By default, “Admin” does not have a registered password, which only plays into the hands.
How can I reset the BIOS password of a computer and laptop
Sometimes curious users of personal computers, or those who seek to protect their data as much as possible, constantly put passwords on everything that is possible: starting from a Word document or a folder and ending with a password on Windows and even BIOS (it is desirable to put the code on the BIOS only if if you know how to remove the password from the BIOS). In addition to all this, each user also has accounts on social networks, mailboxes, various programs (like Skype) or websites. and there are passwords everywhere. And if they are all different, then quite often these combinations are forgotten or just confused.
Loss of BIOS password, i.e. Password to boot the system. In this situation, it turns out that if the user forgets the code from the BIOS, then he does not even turn on the computer. In addition, He will not be able to enter the BIOS to try to reinstall Windows, thereby resetting the password. Such cases quite often end with the purchase of a new motherboard (this is where the BIOS is stored). However, all this can be avoided by taking advantage of some of the weaknesses of the computer architecture. Despite the fact that the BIOS is considered to be quite a powerful means of protection, there are still “secret paths” with which you can bypass the set password in the BIOS. Fortunately, the developers of motherboards have foreseen the likelihood of such situations and deliberately left several options (“back doors”) with which you can reset the BIOS password.
Questions and answers in the field of it technologies and PC customization. Setting a password in BIOS
Before describing the password reset process, you first need to know how to install it, remove it, and also whether it is effective to install it to protect your computer specifically on the BIOS.
Setting a BIOS password to protect your computer is considered more effective for several reasons. If, for example, you set a password when entering the operating system, then it can be easily hacked programmatically or even bypassed (for example, through safe mode). It is unlikely that you can do the same in BIOS. This is the first plus. In addition, the password set in the BIOS is requested immediately when the computer is turned on (even before the operating system is turned on), so that those who do not know the combination will not even be able to turn on the computer. To enter the BIOS settings and change or delete the password, you will also need to enter the existing code, and this is another plus for such protection.
Of course, any protection can be hacked or bypassed, and BIOS is NOT an exception. To do this, you just need to open the system unit or laptop and perform certain manipulations. But not everyone will be able to cope with such a task, and quite often such users simply turn to specialists at the service center.
So how do you set a BIOS password? First you need to restart the computer (or just turn it on if it was turned off before) and enter the BIOS by pressing the “Delete” button. You can click several times until the BIOS opens. there is nothing wrong with that. But not all BIOS calls are made using this button. It all depends on the computer / laptop and the installed motherboard. You can find out which key calls up the BIOS when you turn on the computer (even before the operating system boots). the desired key will be written at the bottom of the screen. It can be “Delete”, “F1”, “F2”, “F10”, etc.
To set the BIOS password, go to the Security tab of the BIOS Setup menu
After the BIOS opens, you need to find the item “BIOS Setting Password” in the main menu. After pressing the “Enter” button, a small window will open in which you can set a password. The maximum possible combination size also depends on the BIOS, for example, 6 characters. So, in this case, you can come up with a good password up to 6 characters, enter it and press the “Enter” key. At the same time, it is advisable to write this combination somewhere else. Further, the system will give the user another similar window where he will need to confirm the password. You must enter the same code again and click “Enter”. After that, the system will display the message “Password installed” (ie, the password is set) and you can click “OK”.
That’s it, the combination is set, but it will be requested only when trying to enter the BIOS. The computer, as before, will turn on without a password. If you need to make sure that the code is requested even when the computer is turned on, then you will need to perform one more setting.
In the same menu, you need to find the “Advanced BIOS Features” tab and click on it. Then you need to find the item “Password Check”. Usually there is a point opposite it “Setup”, which means that the combination will be requested only when entering the BIOS. In this case, you will need to change this parameter to another. “Always”. Now the installed code will be requested both when you turn on the computer and when you try to enter the BIOS. It remains only to save all the changes. To do this, press the “F10” key, and then. “Enter”. The computer (or laptop) will immediately reboot, and when turned on, a window will appear asking for a password. It is necessary to enter the set combination and press the “Enter” key. After that, the operating system will start loading.
Removing BIOS password
If the user is tired of constantly entering the code when turning on the computer or he just wants to delete it, then you need to do the following:
- Go to BIOS and select “BIOS Setting Password”.
- When a window with a new password appears, you do not need to enter anything, just press the “Enter” key.
- When the message “Password uninstalled” appears (ie the password has been removed), press “Enter” again.
- Save the result by pressing “F10” and then “Enter”.
The password will be removed. But this is NOT a password reset yet, but only deleting it. Password reset will be needed if the user DOES NOT know (or forgot) the required combination.
Video guide to reset BIOS password. Itguides.Ru. How to reset BIOS password?
There are several ways to remove the password in BIOS:
- Using a battery;
- Using the CMOS emergency button;
- Using the DOS environment.
Without the motherboard battery, all your BIOS settings (not just the password) will be reset to factory defaults
The first two are the BIOS battery and the emergency button. These parts are found on the motherboard. The battery acts as a constant recharge to save all data. In this case, this very BIOS battery will be able to help reset the unknown code: for this you need to remove it for a while (preferably for a day). Then you need to return the battery to its original place and you can turn on the computer.
The method is effective, but long, and time is a very valuable resource, which may NOT be a user or IT specialist. In addition, on some motherboard models, the battery is very difficult to remove, especially on laptops. It is because of such features that this option becomes not very practical and is used only in extreme cases.
A more practical way, as described in the instructions for the motherboard, is to use the CMOS emergency button. Many motherboards have connectors for clearing CMOS memory. As a rule, such connectors are located near the battery. You can find out the exact location using the instructions for the motherboard or on the manufacturer’s official website. To clear the CMOS memory, you need to press this button, after which the unknown code will be reset (of course, before that you need to turn off the computer from the outlet and spin the system unit). Then you can turn on the computer.
And the last option, how to unlock the forgotten code, using the DOS environment. But for this you need to boot into pure DOS, and not the emulator from Windows. You can remove the password using certain combinations. For example, for Award and Ami BIOS, enter the following:
-O 70 17
-O 71 17
And for Phoenix BIOS, the command will look like this:
-O 70 FF
-O 71 FF
The letter “O” stands for “output”, “Q” stands for “quit”, the first number is the port, and the second is the number of bytes (hexadecimal).
These are the ways you can get access to a locked computer. You also need to remember that resetting the BIOS password is quite expensive, especially on laptops. Therefore, the paranoid and amateurs put passwords wherever possible, it is highly discouraged to put it on the BIOS. you can do without it. Otherwise, after a year or two, such users will forget the password, and, perhaps, this unnecessary precaution will cost them a pretty penny.
Thank me, share the link with your friends on social networks:
How to turn off the password prompt when waking up from sleep in Registry Editor or Local Group Policy Editor
In addition to Windows 10 settings, you can turn off the password prompt when the system wakes up from sleep or hibernation mode by changing the Appropriate system settings in the registry. There are two ways to do this.
For Windows 10 Pro and Enterprise The easiest way is to use the Local Group Policy Editor:
- Press the WinR keys and type gpedit.Msc
- Navigate to Computer Configuration. Administrative Templates. System. Power Management. Hibernation Settings.
- Find two options “Require password when waking from sleep” (one for battery power, the other for mains power).
- Double click on each of THESE options and set “Disabled”.
After applying the settings, the password will no longer be prompted when exiting sleep mode.
In Windows 10, there is no Local Group Policy Home Editor, but you can do the same using the Registry Editor:
- Go to the registry editor and go to the section (in the absence of the specified subsections, create them using the “New”. “Section” item of the context menu by right clicking on the existing section).
- Create two DWORD values (on the right side of the Registry Editor) named ACSettingIndex and DCSettingIndex, the value of each of them is 0 (it is like this right after creation).
- Close Registry Editor and restart your computer.
Done password after Windows 10 wakes up from sleep Will not be asked.
How to completely remove Windows 10 user password (remove password)
If you are using a local account on the computer (see How to delete a Microsoft Windows 10 account and use a local account), then you can completely remove (delete) the password for your user, then Ego will not have to enter, even if you lock the computer with the keys WinL. To do this, follow these steps.
There are several ways to do this, one of them, and probably the easiest one, is via the command line:
- Run the command line as an administrator (for this you can start typing “Command line” in the search on the taskbar, and when you find the desired item, you will right-click on it and select the menu item “Run as administrator”.
- On the command line, use the following commands in order, pressing Enter after each one.
- Net user (as a result of executing this command, you will see a list of users, including hidden system ones, under the topic names, under which they appear in the system. Remember the spelling of your username).
(However, if the username consists of more than one word, also enclose it in quotes).
After executing the last command, the password will be removed from the user, and it will not be necessary to enter it to enter Windows 10.
How to disable password when waking up from sleep
You may also need to remove the Windows 10 password prompt when your computer or laptop wakes up from sleep. For this, the system provides a separate setting, which is located in (click on the notification icon) All parameters. Accounts. Login parameters. The same option can be changed using the Registry Editor or Local Group Policy Editor, which will be shown below.
In the “Required login” section (in some computers or laptops this section may not be available) set “Never” and after that, exit from sleep computer Will not ask for your password again.
There is one more way to disable the password request in this scenario. to use the “Power supply” item in the Control Panel. To do this, opposite the currently used scheme, click “Configure power scheme”, and in the next window. “Change additional power settings”.
In the additional parameters window, click on “Change parameters that are currently unavailable”, and then change the value “Require password on waking up” to “Net”. Apply the made settings. Not in all systems in the power supply parameters you will find such an item, if it is absent, we skip this step.
How to enable automatic login to Windows 10 using Autologon for Windows
Another easy way to disable password entry when logging into Windows 10, and perform it automatically, is the free Autologon for Windows program, which was previously available on the official Microsoft Sysinternals website, and now only on third-party sites (but it’s easy to find the utility on the Internet).
You will see information that automatic login is enabled, as well as a message that the login information is encrypted in the registry (i.e., this is essentially the second method of this guide, but more secure). Done. the next time you restart or turn on the computer or laptop, you will NOT need to enter the password.
In the future, if you need to re-enable the Windows 10 password prompt, run Autologon again and click the “Disable” button to disable automatic login.
How to remove login password using Windows 10 Registry Editor
There is another way to do the above. to use the registry editor for this, however, it should be borne in mind that in this case your password will be stored in clear text as one of the values in the Windows registry, so anyone can view it. Note: a similar method will also be considered below, but with password encryption (using Sysinternals Autologon).
First, start the Windows 10 Registry Editor by pressing the Windows R keys, type regedit and press Enter.
Go to the registry key
To enable automatic logon for a domain, Microsoft account, or local Windows 10 account, follow these steps:
- Change the AutoAdminLogon value (double click on this value on the right) to 1.
- Change the DefaultDomainName value to the domain name or the name of the local computer (you can see it in the properties of “This computer”). If this value is present, it can be created (Right mouse button. New. String parameter).
- If necessary, Change the DefaultUserName to a different username, or leave the current user.
- Create a string parameter DefaultPassword and specify the account password as the value.
After that, you can close the registry editor and restart the computer. logging into the system under the selected user should occur without asking for a username and password.
How to remove password when logging into Windows 10
The instructions describe several ways to remove the password when entering Windows 10 when you turn on the computer, and also separately when you wake up from sleep mode. This can be done Not only using the account settings in the control panel, but also Using the registry editor, power settings (in order to disable the password prompt when waking up from sleep), or free programs to enable automatic login, or you can simply delete the password user. all these options are detailed below.
In order to complete the steps described below and enable automatic logon to Windows 10, your account must have administrator rights (this is usually the case by default on home computers).
Disable password prompt when logging in in user account settings
The first way to remove the password prompt when logging into Windows 10 is very simple and does NOT differ from how it was done in the previous OS version. It will take a few simple steps.
- If your system is logged in not by a password, but by a PIN, first Disable them Using both parts of this instruction: How to disable the request to create a PIN and remove the PIN in Windows 10.
- Press the Windows R keys (where Windows is the OS logo key) and type netplwiz or control userpasswords2 then click OK. Both commands will bring up the same account setup window.
- To enable automatic logon to Windows 10 without entering a password, select the user for which you want to remove the password prompt and Uncheck the box next to Require username and password. If there are comments like this, the solution is described here: What to do if there is no item Require username and password in Windows 10.
- Click “OK” or “Apply”, after which you will need to enter the current password and its confirmation for the selected user (which can be changed by simply entering another login). Attention: if you are using a Microsoft account and the method does not work, try again, but in the upper field, instead of the username, enter the associated email address (E-mail).
In case there is a checkmark “Require username and password” in the window, go to Settings. Accounts. Sign-in options and check if there is an item “Require Windows Hello login for Microsoft account”. If there is. Disable and re-enter the automatic login settings. If not, run the command line as administrator (how to do it) and enter the command (pressed Enter after it):
After executing the command, close the command timeline and restart your computer. Then repeat the steps described above. the item to disable the password prompt should appear. Also, the “Require username and password” option will be unavailable if your computer is currently connected to a domain. However, it is possible to disable the password prompt using the registry editor, although this method is less secure than the one just described.
Judging by the comments, many Windows 10 users are faced with the fact that even after disabling the password prompt by all means, it is sometimes requested after the computer or laptop has not been used for a while. And most often the prerequisite for this turned out to be the included splash screen with the option “Start at the login screen”.
To disable this item, press the WinR keys and type (copy) the following into the Run window:
Hit Enter. In the screensaver settings window that opens, Uncheck “Start from the login screen” or Disable the screensaver altogether (if the active screensaver is “Blank”, then this is also an enabled screensaver, the item to disable looks like “Net”).
And one more thing: in Windows 10 of the latest Vera, the “Dynamic blocking” function appeared, the settings of which are in Settings. Accounts. Login Options.
If the function is enabled, then Windows 10 can be locked with a password when, for example, you leave the computer with a paired smartphone (or turn off Bluetooth in it).
And the last nuance: for some users, after using the first method of disabling the login password, two identical users appear on the login screen and a password is required. This usually happens when using a Microsoft account.A possible solution is described in the instructions Two identical Windows 10 users at logon.
How to remove a user password in an administrator account
Independent methods of unlocking a laptop involve the option of removing the user’s password in the administrator account. This is one of the safest and easiest ways to help solve the blocking problem. If you forgot your password, what to do:
- Press the ctrlaltdelete key combination at the same time (2 times).
- When you open an auxiliary window, you will need to find the fields “User” and “Password”.
- In the first line you need to enter the word “Administrator”, the password column will need to be left blank.
- Press Enter.
- Go to control panel.
- Select user account.
- Go to the profile and delete the existing password. To unlock the laptop, you can also put a new combination of numbers.
How to set and use a new password is a question of many users. After changing the settings, you need to restart the device.
Laptop unlocking methods
When visiting some unprotected resources, users may encounter laptop locking. A similar scenario is also observed in cases where the owner of the gadget simply forgot the password. Many users believe that in order to resolve the situation, it is necessary to completely reinstall the system and reset all data. But everything turns out to be much simpler. There are more loyal ways to unlock a laptop at home that any user can follow.
- How to remove a user password in an administrator account
- How to reset password through safe mode
- How to regain access to a laptop through the command term?
- How to use a boot disk to restore access to a PC
- How to unlock the keyboard
- How to unlock a laptop programmatically
- How to remove a viral banner
- How to lock a laptop
How to remove a viral banner
A virus banner is a program that occupies a large part of the screen and interferes with the user’s work. To remove it, you need to install Kaspersky Anti-Virus or Dr.Web. These utilities have special functions to block the actions of virus banners. Unfortunately they are paid.
There is another way to remove unnecessary utilities. It will require a second computer. The two devices should be connected to each other, scan the infected computer using an anti-virus program and delete unnecessary files from it. After finishing work, both devices need to be rebooted.
How to use a boot disk to restore access to a PC
How to change the password on a laptop. this question can most often be found on technical forums. You can try to change data using a boot disk. To restore access to the system, you will need to go to the BIOS. To do this, when you turn on the gadget, you need to press the F2 or Delete key. A window will be displayed in front of the user. You will need to find the Boot line in it and click on it. What to do next:
- Find line 1 st Boot Device.
- Opposite it enter CD / DVD.
- Insert the prepared disk into the drive.
- Reload gadget.
When you turn it back on, the welcome window on your computer will change slightly. The system recovery line will appear in front of the user, and you will need to click on it. Several recovery options will appear in the window, but all of them will require a password to start the process. The user needs to click on the command term and enter the word regedit.
After that, it will go to the registry editor, where you will need to find the file Hkey_local_machine. It should be selected and click on the “Load bush” button. Next, you need to find the Sam file, select the Hkey_local_machine section, file F. You need to open it and select the term 38, and find the value 11 in it. You need to replace it with 10.
How to unlock a laptop programmatically
Password on a laptop, how to unlock. users often turn to specialists with this question. Wizards can offer to restore the operation of the device using specialized programs:
These programs are already installed on almost all modern computers. First of all, you need to select the utility, go into it and go to the directory. Here you should enter the name of the account you want to unblock. After the name you need to put 0. A randomly generated password will appear on the screen. You need to remember it, and then go to the HDD security window and enter this combination.
How to reset password through safe mode
If you forgot your password on your computer, you can try to recover it using Safe Mode. This is a special mode of operation of the laptop, which allows you to diagnose the system and fix some problems in its operation. How to lock the system and return the password:
- Turn on the laptop.
- Press F8 while it boots.
- Wait until a window appears on the screen prompting you to start working in safe mode.
- Now the user needs to select the item “Account Management” and go to the settings.
To understand how to bypass the password on a computer, you need to go to the user profile and reset the existing data, come up with a new combination of numbers.
How to unlock the keyboard
How to lock a laptop or restore the operation of its peripherals. this question is asked by many users. If the process of locking the keyboard does NOT cause difficulties for users, then unlocking may require some skills and abilities. You can unlock the keyboard using a special key combination provided for a specific type of device. Typically, the parameters are reset with the following sets:
- Fn Numlock.
- Fn F12.
- Fn F7.
Most often, such combinations work on Lenovo, Asus, Samsung devices. Also, information on unlocking can be found in the instructions for use for the keyboard. The second option to reset the lock is to install specialized software. But in this case, the risk of virus infection of the computer increases. Therefore, it is better to carry out the restoration procedure in specialized masters.
If the user decided to start the recovery process on his own, he needs to make sure that the antivirus is enabled during the settings. When installing the anti-virus utility, it will become impossible to lock the keyboard.
How to regain access to a laptop through the command term?
How to set a new password, how to unlock a Lenovo laptop, ASUS are popular questions from users who have gadgets from companies in demand today. You can use the command time limit to unlock your laptop. For such shenanigans, you must have a minimum programming experience. If not, follow the instructions exactly. How to remove password from laptop:
- The first step is to enable the command timeline.
- Press the F8 key.
- Wait for the selection of modes to appear on the screen.
- User needs to select Safe Mode with Command Prompt.
- In the window that appears, enter the following phrase. net user / account name / MyPassword.
- Instead of the phrase MyPassword, you can use a new password to log in.
Next, when you turn on the device, you will need to enter a new password. After that, you can fully use the computer.
How to lock a laptop
It is not difficult to put a lock on your computer. Even a beginner can handle this action. How to lock a Windows 7 laptop:
- Find Control Panel.
- Select a section of accounts.
- Select the required profile.
- Find the create password button.
- Enter the required combination of numbers and letters.
- Reboot device.
Blocking on computers with Windows 8, 10 is carried out in a different way. The user needs to open the back panel, go to the settings, select the section “Password” and set the desired combination of numbers and letters. After that, the computer must be restarted and enter the Set password.
What to do if you forgot the password from the wi-fi router
How to find out the password from the router or what to do if it is hopelessly forgotten? It’s that simple! Wi-fi has long and firmly become a part of the lives of many city dwellers. A lot of people can no longer imagine visiting a public place, for example, a cafe, without the ability to connect to the Internet. Naturally, there is a desire to have wireless access to the network at home. This is very convenient, but there is a possibility of encountering a typical situation, which, one way or another, probably everyone faces. you need to connect a new device to the Internet, and the password from the router is forgotten. Fortunately, this problem can be solved.
How to reset the password from a router to standard / factory?
If you do not remember the login and password from the router, try entering the factory ones. If they DO NOT fit, you will have to reset. This is very easy to do. On each router you will find a small button, usually next to the power button, which you need to press with something sharp (because it is very small) and hold for about 10 seconds.
After that, all logins / passwords / settings will be reset to factory settings and you can use your router. But please note that you will have to re-enter all the settings that were made earlier.
Standard passwords for routers and routers
By default, in most cases, a login will be set on your router “admin” and a similar password “admin”. But in some models the situation is different. For example, in the D-Link DI-804 model, the password field will need to be left blank with the same login, and in the Zyxel Prestige 650 model, the login and password will be a set of numbers “1234”.
By the way, if the above passwords do not fit, then it has already been changed for you, here is a list of the most popular passwords, try them.
How to change the password of a Wi-Fi router?
For this procedure, you need to connect the router to the computer using the cable that comes with it.
- Launch your favorite browser and type 192.168.1.1 in its address bar;
- Type your username and password in the appropriate columns to start configuring the router in the appropriate section;
- Go to the Wireless section and then. Wireless Security;
- Check WPA / WPA2;
- Set the following settings: Version should be WPA2-PSK and Encryption should be Automatic;
- In the column called PSK Password, enter your new (changed) Wi-Fi password and click Save;
- After the router asks to Reboot, click OK;
- In the red inscription that appears, click on the blue phrase “click here”, and the process of changing the password will be completed.
3 more useful articles:
Wi-Fi Key Recovery is a reliable program that allows you to remember the password for any Wi-Fi network to which.
Wi-Fiphisher is a phishing program. It is easy with her to get a password from strangers on the network without hacking.
Sidejacking Utility translates from English as “Left connection” and uses the classic version of the attack referred to as.
- Wi-Fi routers: radius and range, how to enhance?
- How to get ROOT rights to Android in 3 minutes
How to find out the password from your Wi-Fi router if you forgot it?
To go through the Wi-fi password recovery procedure, you will need one computer that was previously connected to it.
- Right-click on the connected Wi-Fi icon in the right, next to the clock, bottom corner of the monitor and among the items that appear, select “Network and Sharing Center”.
- In the window that appears, select “Wireless Network Management”.
- When you see another window that appears, on the required connection you need to click again with the right mouse button and select there “Properties”.
- Inside the Security tab, in the column titled Network Security Key, you will find a hidden password. To see it, you need to put a tick in the “Display entered characters” column, and it will immediately become visible to you.
If there is no computer already connected to the network, then you need to find out the password using the router itself.
- Connect the router to your computer using the supplied power cord.
- In the address bar of any browser, you must type the following address. 192.168.1.1. Next, you will need to fill in the fields with the login and password, which will allow you to get access to the settings. Most likely, this is admin / admin.
- Next, you need to go to the next tabs. Wireless and Wireless Security. In the column titled PSK Password: you will see your password. Perhaps it will be listed in some other column in the same section. If you have a router from Asus, you will see the password immediately on the first page.
You are completely crazy, I have a problem, such a dad changed the flogging from the router and not from wai fay and turned off YouTube for me why they write the same thing on the Internet why it is impossible to find out the flogging from the router settings YouTube does NOT work for me, but I can not go into the settings to change everything help pliz!
So Reset the password on the router, go to its settings and change the password to wi-fi.
In my router, the password did not match at the first water as soon as I bought it on my computer and went to Wi-Fi Not suitable.
So change your password to Wi-Fi, it’s easy.
The simplest thing is to start connecting to Wi-Fi. it asks for a password, approach the router, press the button. send the password (most hardware has it, just don’t confuse it with reset) and voila. the router itself gives you access. Next, we look at the flogged according to the instructions already on the computer (if there is of course a desire)
So Reset the password on the router, go to its settings and change the password to wi-fi.
I forgot the password from the router, the reset button does not help, I am suffering all day, what to do in this case?
The reset button may NOT work due to poor contact (weak pressing), try pressing harder or disassemble the router and close the contact yourself.
Hello, we go by the IP address on the computer and on the mobile phone of the event wilface on the roll and change the password
And you can change the password from Wi-Fi using a smartphone, thanks in advance