How To Find Out How Many Bits Are On A Laptop

How to change 32-bit Windows 10 to 64-bit

If you are upgrading from 32-bit Windows 7 or 8 (8.1) for Windows 10, the process installs the 32-bit version of the system. Also, some devices have a pre-installed 32-bit system, but the processor supports 64-bit Windows 10 and it is possible to change the OS to it (and sometimes this can be useful, especially if you have increased the amount of RAM on your computer or laptop).

This tutorial explains how to change 32-bit Windows 10 to 64-bit. If you do not know how to find out the bitness of your current system, read more about this in the article How to find out the bitness of Windows 10 (how to find out how many bits are 32 or 64).

Installing Windows 10 x64 instead of 32-bit system

When upgrading the OS to Windows 10 (or buying a device with Windows 10 32-bit), you received a license that is suitable for a 64-bit system (in both cases, it is registered on the Microsoft website for your hardware and you do not need to know the key).

Unfortunately, without reinstalling the system, it will NOT work to change 32-bit to 64-bit: the only way to change the bitness of Windows 10 is to perform a clean installation of the x64 version of the system in the same edition on a computer, laptop or tablet (in this case, you can not delete the existing data on the device, but the drivers and programs will have to be reinstalled).

Note: if there are multiple partitions on the drive (i.e. there is a conditional D drive), it would be a good solution to move your user data (including from the desktop and system document folders) to it.

The procedure will be as follows:

  • Go to Settings. System. About the program (About the system) and pay attention to the “System type” parameter. If it says that you have a 32-bit operating system, x64-based processor, this means that your processor supports 64-bit systems (if the processor is x86, it does not and you should not follow the next steps). Also pay attention to the release (edition) of your system in the “Windows Specifications”.
  • An important step: if you have a laptop or tablet, make sure that the manufacturer’s official website has drivers for 64-bit Windows for your device (if the bit depth is not specified, usually both system options are supported). It is advisable to download them immediately.
  • Download the original Windows 10 x64 ISO image from the Microsoft website (at the moment, one image contains all the system editions at once) and create a bootable USB flash drive (disk) or make a Windows 10 x64 bootable USB flash drive in the Official way (using the Media Creation Tool).
  • Start the installation of the system from a USB flash drive (see How to install Windows 10 from a USB flash drive). At the same time, if you receive a request about which edition of the system to install, select the one that was displayed in the system information (at step 1). The product key does not need to be entered during installation.
  • If there was important data on the “C drive”, then in order for them NOT to be deleted, and not to format the C drive during installation, just select this partition in the “full installation” mode and click “Next” (files of the previous Windows 10 32-bit will be placed in the Windows.Old folder, which can be deleted later).
  • Complete the installation process, then install the original system drivers.

This completes the migration from Windows 10 32-bit to 64-bit. THOSE. The main task is to correctly go through the steps with installing the system from a USB drive and then installing the drivers in order to Get the OS in the desired bit depth.

Does your laptop support 64-bit

Before installing a new system, make sure your laptop can handle it. To check this, follow the SIMple instructions below.

  • Launch the device manager: press WinPause and select Task Manager.
  • Then select the processor and open its properties.
  • It remains to open the browser and load the copied line into the search service. Choose from the search results that which relate to the manufacturer’s site. In our case, this is Intel.

The description must indicate whether the processor supports 64-bit.

What does the “Program Files (x86)” directory mean

Unlike 32-bit Windows, the 64-bit version has two directories on the system disk. They are just needed to install programs of different bit depth. The x86 symbols identify a 32-bit or 64-bit program. New 64-bit ones are installed in the regular Program Files directory. And what is installed in x86-32-bit applications.

Here we need to remind you of the meaning of x86. This is the name of the architecture, several generations of processors starting from 8086 In it, the first 32-bit model was 80386, or SIMply i386. But the transition from 16 bits to 32 happened recently, which over time, x86 began to be identified with 32-bits. Support for x86 meant that the program could run on i386 and later, which means that support for 32 bits had to be by definition. The x86-64 platform extension brought 64-bit support. Than a little confused users, often looking for an answer to the question “32-bit is 64 or 86?”, Which has a number of other formulations.

To learn more about the architecture of processors and their characteristics, we recommend reading the article. how to choose a processor for a laptop.

How To Find Out How Many Bits Are On A Laptop

How to find out whether 32 or 64 bits are worth with you and which is better

In information technology, everything is tied to bits. These are logical units. The unit is too small for a modern laptop or desktop CPU. It operates on the so-called words with a length of 32 bits (4 bytes of 8 bits each). The processors that support 64-bit calculations work with words of the sixty-fourth bit (8 bytes by 8 bits). Finding out exactly what you have is quite SIMple, and what, for example, gives the transition to 64-bit computing and which system is better is already a slightly more complex question.

Which is better 32 or 64-bit system?

For ordinary laptop and computer users, this issue is perplexing. Users are used to dealing with more understandable things. For example, it is known that increasing the RAM size almost always has a positive effect on the speed of programs. And the transition to SSD-drives can dozens of times speed up the process of loading the operating system on a laptop. For the layman, the result of the transition, for example, to a 64-bit system is ambiguous. However, this does not mean that such a transition is useless. Choosing the right system will improve the performance of your computer. That is why it is important to determine which is better.

The best system is the one that matches the capabilities of your processor. The main and defining difference between 32 and 64-bit systems is that you can install more memory on your laptop. This automatically opens up another fairly easy way for you to increase the performance of your laptop.

How to upgrade to 64-bit Windows

Microsoft developers will not provide any migration from one version to another. The system files are fundamentally different in THESE two assemblies. To switch to another version, you need to reinstall Windows. When downloading, you will need to select a 64-bit system image.

How to find out how many bits a program supports. 32 or 64

In addition to system applications, each user will find their favorite programs. Will they work in the new 64-bit environment? In fact, most applications do NOT require a specific version. Both versions work perfectly in a 64-bit operating system: both 32 and 64-bit programs.

How do you know the 32 or 64 bit versions of the applications you need? It’s SIMple. If the Application must use a large amount of memory in its work, then it is better to choose the 64-bit version. And if the program is SIMple and NOT too demanding on laptop resources, then leave the old and debugged versions 32-bit.

It makes sense to search and install 64-bit versions of the following programs:

  • Graphic editors like Adobe Photoshop and SIMilar monsters. The speed of application of “heavy” filters for image processing increases with a large amount of memory;
  • Antiviruses. They are highly integrated with system applications and require the same bitness as the operating system;
  • Archivers. Compressing large files can be more efficient;
  • Accounting and economic programs. For example, 1C, which also knows how to use memory efficiently;
  • Office suites for working with large data. For normal work with text documents, a large amount of memory is NOT required, and you can use 32-bit versions of programs.

The general rule is as follows. If the program requires a large amount of memory to work, which is easy to determine by the Task Manager, then Install the 64-bit version. Otherwise, use 32 bits.

Why switch to 64-bit computing?

Moving to a 64-bit version of Windows did not provide any visible benefits with less than 3 GB of RAM. And such at the time of the appearance of the first 64-bit version of “windows” was the majority. On the contrary, problems appeared when 32-bit versions of programs worked in a 64-bit environment. Why does Microsoft still recommend using the 32-bit version of its Office even on a 64-bit OS?

The secret is SIMple. If your laptop has 4 or more GB of RAM, then you can use it effectively only under a 64-bit OS. If you have less than 4 GB, then you will not get any advantages, except for probable failures in the operation of old programs.

READ  How to find out the type of RAM on a laptop

It is especially worth mentioning here that users who decide to add memory to their laptop must also think about switching to 64-bit Windows. After all, without it, the laptop SIMply will not see the additional volume, and the money will be wasted. The maximum size of RAM that a 32-bit system can handle is something around 3.5 GB. This figure is approximate, since on most laptops part of the RAM is reserved for the integrated card.

How to find out which 32 or 64 bit is on your laptop

Most users don’t know exactly what version of the system they have installed. How to Easily Know 64 or 32 Bit System on Your Laptop?

  • Press the WinPause keys to get a window like this:
  • On Windows 8.1, the window is called by the theme with the same keys and looks something like this:

If the laptop processor does not support 64-bit computing (paragraph 4.1 of this article) or a 64-bit system is already installed on the laptop, then the question of advantages is irrelevant for you. For the rest, we will tell you what you Win when you switch to an increased bit depth.

Our recommendations

You can determine which version of Windows to use on your laptop, 32 or 64 bit, by two points: the presence of support for the new mode in the processor and the excess of 4 GB of RAM. If you get a positive answer to both questions, feel free to upgrade to the new version. Sun. it is safe to NOT take any action and run on the old 32 bit.

Viewing data in the CPU via “System Information

Windows 10 has a built-in application for viewing complex information about the system, here you can also find information about the processor. This can be done in a couple of SIMple steps:

  • Open the “Run” window by searching or by using the Win R hotkeys;
  • In the window that appears, enter the MSInfo32 command;
  • Click on “OK” to open the “System Information” panel;
  • On the right side of the screen, look for the term “Processor”. It will indicate the CPU manufacturer, the number of physical cores and threads, and the processor frequency.

The System Information utility provides extremely reliable information about all components of your computer.

Through the Task Manager

This system utility. This is a treasure trove of data in the state of the device and its technical characteristics. Calling the Task Manager, you can find out all the necessary information, which will allow you to find out how well the CPU copes with tasks.

How to find out how many cores and threads are in the processor:

  • Calling the Task Manager by pressing the Ctrl Alt Delete hot keys or by finding the program through Search;
  • Go to the “performance” tab;
  • The section “Central Bank” will open immediately. Below the resource usage diagram, information about speed, operating time and much more will be displayed. Here you can also see a help on the number of threads, which are otherwise called logical processors.
  • The number of streams is displayed in the left column opposite “Streams”.
  • The number of cores is available through the right column in the “Cores” line.

The presented method is good for its speed. You can get all the necessary information about the processor, how many cores and threads it has, in a few clicks.

Official website of the manufacturer

Once you know the manufacturer of your PC or laptop processor, it is easy to check the detailed specifications of the model on the main website of the CPU manufacturer.

For example, for the Intel manufacturer, the processor specifications can be found as follows:

  • Go to Intel website.
  • In the search bar, enter part of the processor name and press Enter.
  • Find your processor in the search results.
  • Click on the link to go to the technical specifications.
  • In the Performance section find 2 lines: Number of threads and Number of cores.

If you have a second manufacturer’s device model (for example, AMD), just enter its name in any search engine and go on the first request. It will lead to the manufacturer’s official website and contain detailed performance information.

How to find out the number of cores in a processor: instructions for Windows 10

With the development of computer components, the number of processor cores is steadily growing. This metric has long become synonymous with hardware performance: more cores mean more tasks that can be processed in parallel. In addition, many resource-intensive programs and games are designed for a large number of logical threads to improve optimization.

You can find out the number of CPU cores in different ways. We will learn about the SIMplest and fastest of them, and do not require the installation of Special programs.

CPU Information in Device Manager (Windows 10)

Another utility that allows you to quickly find out all the basic characteristics of the installed CPU is Windows Device Manager.

The number of processor cores in Windows 10 can be obtained in the following way:

  • Find the shortcut “This PC” on the desktop or enter the name in the search bar;
  • Right-click on the shortcuts and select “properties”;
  • You can also open the Device Manager utility window by going to the Run dialog and entering the command “devmgmt.Msc”;
  • The System window will appear. On the left side of the screen, select “Device Manager”;
  • In the menu, you can see data about all components of the computer. Find the “Processors” item and open it. Menu terms appear, the number of which is equal to the number of cores in the PC. You can immediately read the name of each of them, manufacturer and frequency.

The “plus” of this method is that you can see detailed data about each physical core of the device in real time. Disadvantage. Using this option, you cannot find out the number of processor threads.

Receiving data through the console

If you prefer to work with your computer’s command line interface (or PowerShell console), you can get the Processor Information you need with just one command. over, it does not necessarily enter it on behalf of the administrator.

  • Open the command line through the Run dialog by clicking on the Win R keyboard.
  • In the window that appears, enter the command “cmd”.
  • Enter “WMIC CPU Get DeviceID, NumberOfCores, NumberOfLogicalProcessors” into the console.
  • After a second of delay, a list of PC processors is displayed, and for each of them. Number of cores and logical processors.

CPU-Z software

Additional software often provides the user with more options than the built-in applications. Windows 10 has a lot of its own utilities, but you can learn everything about the processor using third-party tools.

The CPU-Z application offers wide functionality, which allows you to find out almost any data in the processor (including the number of processors) in a couple of clicks.

  • You can download the utility at the following link on the Official page.
  • After downloading the CPU-Z distribution, run the application;
  • In the CPU tab, at the bottom right, the “Cores” and “Threads” fields will be presented: How many cores and threads in the processor are active, respectively;
  • The same program provides useful information such as data on processor voltage and cache size.

Via computer properties

  • Open the properties of your computer by right-clicking on the section “My Computer” or “This Computer” in the “Explorer”.

Why 64-bit Windows won’t install

If the configuration fails, it means that your processor does not support a 64-bit system and is designed only for x32. There is only one way out of this situation. to purchase a new processor, which will meet your requirements.

Through the command term

  • Using Windows search, open the command term.

Differences and advantages of different number of cores

So, there are two types of processors: single core (x32) and dual core (x64). Sometimes you can find the designation x86. This is not a separate type of processors, but the designation of the microprocessor architecture. Most often, the x86 figure indicates that the processor is single-core, but it can also be used for a 64-bit processor. Therefore, you should not be guided by it, always look for the designation in the x36 or x64 format.

The performance and operating speed, respectively, are higher in 64-bit processors, since two cores work at once, and not one. If you are using a 32-bit processor, you can install as much random access memory (RAM) as you want on your computer, but the system will use only 4 GB of all memory. With a 64-bit processor, you can use up to 32 GB of RAM.

Via computer properties

  • Open the properties of your computer by right-clicking on the section “My Computer” or “This Computer” in the “Explorer”.

How to upgrade to Windows 7 x64

If you want to increase the system performance and the amount of available RAM, as well as expand the number of supported applications and games, then you need to switch to a 64-bit operating system. This can be done The only way is to erase the old 32-bit system and install a new one.

Please note that all files on the computer will be irretrievably lost during this operation, so copy them to a third-party media in advance so as not to lose anything important. So, after you start installing a new operating system, you will be prompted to select a language and confirm the start of the operation, as well as select a system version. Select the one that is x64 bit and go through the installation process.

READ  How to enter BIOS on a dell laptop

Requirements for a 64-bit system

The main advantage of x64 processors is that they support programs, games and operating systems written not only for 64-bit processors, but also for 32-bit ones. That is, if you have an x32 processor, then you can only install a 32-bit Windows operating system, but not a 64-bit one.

How to find out the bitness of the operating system and processor in Windows

There are two types of processors: 32-bit and 64-bit. These numbers represent the processor capacity. Which processor you use will depend on which version of the operating system to use, how to choose programs and games, how much RAM you can put on your computer. You can also find the designation x86, which is often mistaken for a separate processor bit. But first of all, we will determine what type of operating system is installed on your computer.

How to find out the bitness of the installed Windows

There are several ways to find out how many bits your Windows operating system is using. Look for x32 or x64 values, as these are the main indicators of the system’s bitness, and x86 can refer to both single-core and dual-core systems. Let’s first consider the SIMplest and fastest option.

How to find out how many bits of windows 10

Hello dear visitor! In this lesson I will tell you how to find out how many bit versions are installed on our computer, and you will also find out which version of the architecture is better to use on your computer or laptop.

What is the impact of the bitness of the system in Windows 10 between x32 and x64.
For a very long time, a 64-bit operating system was not used and was very rarely installed on computers, since many programs and drivers were NOT compatible with this version.
Absolutely everyone installed a 32-bit system.
Today the 64x bit version has become very popular, all games and programs, drivers are well compatible with this architecture.
When is it worth installing the 64x bit version of windows 10. if your computer or laptop has 4 gigabytes of RAM, then you need to install the 64x version here, since windows 10 32x bit version will NOT see all the installed memory, no matter how much you put 4GB of RAM or 8 gigabytes or 16 gigabytes, your operating system windows 10 32-x version will see only 2GB-3GB but not more.
If your computer will have 2 gigabytes of RAM installed, then you need to install the 32-x version of windows, if you install the 64-bit version on a computer with two gigabytes of RAM, then your computer will SIMply not have enough RAM and it will start freeze and open applications for a long time, will respond to the tasks for a long time. Therefore, if you have 2 gigabytes of RAM, then we use only the 32 bit version of windows.
If you have more than 2 gigabytes of RAM installed, then you need to install a 64 bit operating system.
Now let’s see how to find out how many bits of windows 10.
You can see how many bits your Windows 10 uses in very different ways, there are a lot of them.
Let’s look at several ways.
The first method is the fastest available and easiest.
Hover the mouse cursor over the start button and press the right mouse button once, in the menu that opens, select the item “System”.

After that, you will see the “System” window, in this window the windows 10 architecture will be indicated opposite the terms “System type:” you will see which operating system you have installed is 64-bit or 32-bit.
In my case, I have a 64-bit operating system installed.

The second way. we will use the command term.
Hover the mouse cursor over the “Start” button and press the right mouse button once, in the context menu that opens, click on the link “Command line (administrator)”.

In the command line that opens, write systeminfo and press the “Enter” key, after which your computer will start reading information in your system.

After completion, you will see all the information about your system, and opposite the terms “System type”, you will see how much bit system is used on your laptop or computer.

And the last way. you can find out how many bits you can using “This computer”, if there is no icon for this computer on your desktop, then read the instructions on how to bring this computer icon to the Windows 10 desktop.
And so we hover the mouse cursor over “This computer” and press the right mouse button once, in the context menu that opens, select the “Properties” item, after which you will open the “Systems” window, in which you will see how many bit versions are installed on your system.

Installed memory in BIOS or UEFI of a computer or laptop

Information about the installed RAM can also be found in the BIOS (UEFI) of your PC or laptop (see How to enter BIOS / UEFI in Windows 10).

In the BIOS of different manufacturers and different versions, this information is located in different locations: sometimes on the main page (Main), sometimes in SEPARATE sections like System Information or RAM (DRAM) Configuration. On a PC in THESE sections, information about the amount of installed memory, frequency and voltage (as well as additional information and settings) is usually available.

How to find out how much RAM is on a computer

If you need to find out how much random access memory (RAM) is installed on your computer or laptop, as well as Get additional information about it: current frequency, number of occupied RAM slots, type, model or voltage. this can be done both by built-in system tools and using third-party freeware programs (in the latter case, you can get more information).

This manual details the various methods to determine how much GB of RAM is installed on a PC or laptop, as well as some additional information that you may find useful. If you are interested in how to find out how much memory your computer supports, I touched on this topic in a separate article: How to increase the RAM of a laptop (also relevant for desktop computers). Also useful: Is it possible to put RAM of different sizes, frequencies, voltages.

  • How to find out how many GB of RAM on a computer using Windows
  • Determining the amount of RAM using third-party programs
  • Viewing information about installed memory in BIOS / UEFI
  • Instructions

Determining the amount of RAM of a computer or laptop using Windows

Windows 10, 8.1, and Windows 7 provide SIMple utilities to view your computer’s settings, including hardware specifications regarding the amount of RAM. First in a method for all recent OS versions, and then a separate method for Windows 10.

  • Press the WinR keys on your keyboard (the Win key is the key with the OS logo), the Run Dialog Box will open, type MSInfo32 into it and press Enter.
  • The system information window will be launched. In it, in the first tab, you will see the item “Installed RAM” and its size in GB. This is information about how much RAM is on your computer.

detailed information regarding the hardware characteristics of the installed RAM is missing here. But often for a novice user, this information is enough.

If you have Windows 10 installed, then you can use the following method and get more details about the installed RAM:

  • Open the task manager (to do this, you can right-click on the “Start” button and select the Corresponding item in the context menu that opens). If you see the “Details” button at the bottom of the Task Manager window, click on it. If not, go to the “Performance” tab.
  • On the Performance tab, select Memory. In total, in the upper right corner you will see the total amount of installed RAM and its type (DDR4, DDR3, etc.), And in the column at the bottom right (can be cut off when the window size is small). the frequency (in the “Speed” section, and the amount used memory slots (slots).

Keep in mind that information about the number of used slots may be incorrect (especially for laptops): sometimes, if there are only 2 RAM slots, the system “sees” 4.

Using third-party programs to find out how many GB of RAM are installed

Third-party programs for determining the amount of memory and other characteristics of the computer are good because they allow you to get more detailed information about the various parameters of RAM. There are many different programs for viewing computer characteristics, but in the context of this article, I would recommend using the free CPU-Z, which can be downloaded as an installer or portable version in a ZIP archive from the official website /cpu-z.html

After starting the program, go to the “Memory” tab. Here in the “General” section you will see basic information about the installed memory (I do NOT specifically touch on some parameters, as unnecessarily in the context of the article):

  • Type. memory type.
  • Size. total size of RAM.
  • Channel. in which mode the memory works. Usually: Single (single-channel) or Dual (two-channel).
  • NB Frequency. the current frequency of the memory controller (cannot be the same as memory frequency and Not exactly for beginners). Sometimes the item may be NOT active (on older systems) and NOT display information.

You can see the current actual memory frequency in the Timings. DRAM Frequency section. It can “jump” and be two times less than the declared frequency in the characteristics of your RAM module. this is normal (we get twice the frequency due to the dual-channel mode, but this field will still display the actual frequency), small the downward difference from the “round” number is also normal and depends mostly on the processor of a computer or laptop.

READ  How to shoot a video on a laptop WEB-camera

Separately, on the SPD tab in CPU-Z, by selecting a specific slot in the upper left, you can get information about the characteristics of each installed memory module: from the main (for beginners). type, maximum frequency, manufacturer, model of the memory module (in the Part Number section). memory module size, voltage (below, in the table under Voltage).

There are other programs that allow you to get the same detailed information. Popular, but not entirely free. AIDA64.


And SIMple. Where the first two ways to find out how much RAM are installed on your system are graphically shown.

Hope the tutorial was helpful. If something is not completely clear, I look forward to your comments.

Windows 7 System Information

How to see how many cores are on a computer in Windows 7

  • Open the “Start” button on the left, at the very bottom of the screen.
  • Go to the “All Programs” tab, select the “Accessories” folder.
  • Find the item “System Information” there, the icon of which is a computer monitor.
  • In the window that appears in the line “Processor”, the number of cores and logical processes will be displayed.
  • If the number of cores is NOT displayed, then use the universal methods.

“Task Manager”

The method is suitable for determining the number of physical cores and logical processes in Windows 7 and 8. For it, you must perform the following steps:

  • Hold down the Ctrl, Alt and Delete buttons. On different keyboards, their location is slightly different, but they are all located in approximately the same place, as shown in the screenshot.
  • From the list that appears, select “Task Manager”.
  • Go to the “Performance” tab for Windows 8 and “Performance” in Windows 7.
  • Under the diagrams, in the lower right corner, find the Required line (Windows 8).

Sometimes the numbers are not displayed. just Expand the window, clicked the “Expand” button.
For the “seven” the number of cores will be shown by the cells of the diagrams: if there are two of them, it means that the computer has two cores (the line “Chronology of CPU load”). Optional: you can get to the task manager in the second way. You need to name it with the right mouse button on the taskbar and click on the line “Task Manager”.

“Device Manager”

With this tool, you can see NOT so much the number of cores as their threading. The system often confuses these indicators on modern computer models. Here’s how to see how many cores are on a computer via Device Manager:

  • For Windows 7 and 8, the commands are the same. Click RMB (right mouse button) on the “Start” menu button and select the “Device Manager” line. Or Use the keyboard shortcut “Win X”.
  • In the window that appears, find the line “Processors” below.

This method should be used by those who need to Get the most detailed information.

Universal ways

With the help of them you can see how many cores are on a computer in any version of Windows.

How to find out how many cores are on a computer

You can find out how many cores are in the processor of a laptop or personal computer in several ways. However, each individual method may not work for all laptops, so try different ones and you will definitely get an answer to your question.

“Computer Information” on Windows 8

In the “eight” you can get to information about the second way:

  • Move the mouse to the lower right corner of the screen, Wait for the sidebar to appear.
  • Select “Options” located at the very bottom.
  • At the top, click on the line “Computer Information”.

How to find out how many cores are on a computer in Linux?

In the running console, you need to enter the nproc command. this is the fastest way to determine how many cores a laptop or PC is equipped with.

View resolution through standard Windows features

Finding out the screen resolution on Windows 7, 8, 10 is quite SIMple. In the Run dialog box, type desk.Cpl, press Enter to open the display options window.

In Windows 7, 8 you can still get to THESE settings in the following ways:

  • Right-click on the desktop (on an empty spot) and select “screen resolution” from the menu.
  • Call Control Panel Windows 7, 8, then set the view to “Category”. In the block “design and personalization” Click the parameter “adjust the screen resolution”.

In the screen settings you will see the following parameters: display selection, change of monitor resolution, change of screen rotation. Pay attention to the second parameter, looking at it, you will determine the current screen resolution in pixels in width, height.

Determining the current and native screen resolution of a monitor in Windows

The screen resolution of a monitor is an important factor in the quality of image presentation on displays. It is measured in pixels in width and height. The larger the ratio of THESE pixels, the clearer, richer the displayed information looks. Sometimes you need to find out the screen resolution on Windows 7, 8, 10, in order, for example, to set a picture on the desktop background, determine the characteristics of the monitor, change the Windows start-up saver, and more.

Modern society uses mainly LCD (flat) monitors, which replaced bulky CRT monitors. Flat panel devices offer many shapes and sizes, for example, widescreen screens use an aspect ratio of 16: 9 (10), standard 4: 3.

LCD has a predetermined ratio of matrix pixels; CRT does not have it. Based on this characteristic, Windows itself sets an acceptable resolution, refresh rate, and color rendition. With the information on monitors, let’s move on to determining the current and native screen resolutions.

Determining the native resolution of the monitor

To find out the resolution of your monitor, you can use the screen settings above. Windows itself sets the optimal image parameters, so almost always the current resolution corresponds to the native one, marked “recommended”.

If you do NOT see the “recommended” mark, rather the pixel ratio is set to a different one, to see all available resolutions, click on the current one. Next, define and set the native pixel ratio as recommended. Still problems with the displayed resolution may arise due to the lack of graphics drivers.

If everything is in order with the drivers and optimal screen settings, then from the screenshot below we can say with confidence that the native resolution of the matrix is ​​1366 by 768 pixels, it is also the maximum.

The table below shows popular bundles that will help you find out the monitor diagonal based on the native resolution and vice versa.

Monitor diagonal (inches)native permissionwidescreen
14-151024 x 768
17-191280 x 1024
20-231600 x 1200
241900 x 1200
17-181280 x 800
191440 x 900
20-231680 x 1050
24-291920 x 1080 to 1920 x 1200
thirty1920 x 1080 to 2560 x 1600
Laptop screen diagonal (inches)native permissionwidescreen
13-151400 x 1050
13-151280 x 800
171680 x 1050
tablet screen1366 x 768

You can view the screen resolution on the manufacturer’s website, any other resource or in the documentation. It is enough to know the manufacturer’s firm and the model of the monitor, laptop. This data is printed on a monitor or in the form of a sticker on a laptop, and can also be found in the documentation. Now you know how to find out the screen resolution on Windows 7, 8, 10. I hope the recommendations helped you and consolidated your knowledge.

Table of Contents