Laptops and Tablets • Recommendations and advice


How to connect your tablet to the Internet via your phone

Possible connection problems

Sometimes it is technically impossible to implement both wired and wireless connection to the network. some devices have a built-in module that does not allow access to the web. For example, on older tablets (until about 2005) this function was not provided.

All ways to connect your tablet to the Internet

Connecting the tablet to the Internet is carried out in 6 different ways. To do this, you can use both the capability of the embedded OS (operating system) and extraneous resources. All popular options are discussed below.


This connection will be appropriate in the event that the gadget does not have the ability to enter the web via Wi-Fi or via a mobile network.


  • a cable is connected to the computer;
  • the cable is connected to the tablet;
  • a warning appears at the top of the screen that a connection is in progress;
  • select “Data transfer capability”.

Depending on the OS, the tablet may or may not require a connection password.

6 powerful ways to connect your tablet to the Internet

Choosing a tablet, the user first of all pays attention to the ability to connect to the network. Indeed, during operation, when you have to download files, books, music, this question becomes an edge. How to connect the Internet on a tablet via a SIM card, cable and Wi-Fi. below in the article.

connect, tablet, internet, phone

Through another tablet / smartphone

The manual on how to connect a tablet to the Internet via a phone begins with setting up the router mode in the device to which you plan to connect. The algorithm on smartphones of different OS is almost the same.

To summarize, the sequence would be:

  • settings;
  • connection and sharing;
  • access point;
  • enabling and setting a password or using a standard one;
  • go to the “Settings” on the tablet;
  • Wi-Fi;
  • network selection, password entry.
  • This is enough for a complete connection.

Operating system problems

It also depends on the operating system of the gadget. If it is official (or at least a sensibly assembled custom one), regardless of whether it is Android in front of the user, Apple or Windows Phone, there should be no problems. In the case of a pirate counterfeit, anything is possible. In other words, it is worth checking the version of the system and making sure that it supports some kind of connection.

Connection via 3G modem

Now a little about how to connect mobile Internet on a tablet using the built-in functionality and a SIM card:

  • Any operator’s card is inserted.
  • Settings.
  • Mobile networks.
  • Enable function.

Further, there is an automatic setting depending on the type of operator and device. If this does not happen, you need to contact a mobile consultant. But more often than not, it is enough to follow the above instructions and restart the tablet.

Via laptop

Now how to connect the tablet to the Internet via a computer.

Make sure the device is connected to the grid using a router or cord.

Right-click on the Wi-Fi icon.

Tap on “Computer-to-computer wireless network”.

Choose a name and pass, leaving the connection on WPA2-Personal.

Select it, enter the password and connect.

It turns out in almost the same way as through Wi-Fi, only you have to tinker a little longer with setting up a local network. But this method will help those who do not know the router password, or those who connect to the web only through a cord.

How to connect a tablet to the Internet via WI-FI, 3G modem, 3G, Ethernet

How to set up the Internet on your tablet, as well as how to connect your tablet to the Internet, you will learn from this article. It describes the most popular ways to connect to the Internet. With links to detailed instructions. Do not hesitate to ask questions if something is not clear, than I can. I will help.

Let’s start. Let’s start with the easiest way. Wi-Fi. It’s simple, find your network in the list after turning on Wi-Fi on your Android tablet. Enter the password you asked and you’re done. On subsequent connections, you will not need to re-enter the password, Android will automatically remember them. If you still fail to connect, make sure that you do not have a blocking by MAC address. Suddenly they put it on and forgot. In this case, just add the tablet’s MAC address to the exclusions list in the modem settings. A video on how to set up Wi-Fi in a router / modem, and another video on how to connect to a Wi-Fi network on a tablet. I also recommend reading my article on how to set up Wi-Fi on your tablet.

Simple too. The same principle works as in phones. Insert the SIM card into the tablet, and it will figure out what to do with it (in some cases, the SIM card must be activated, activation of the Megafon SIM card on the tablet). Turn on Data transfer in the settings and pick up the Internet. Some mobile operators send SMS with internet settings. Problems are solved with the operator himself. And as a rule, all settings and instructions can be found on the website of your operator, and they all boil down to one thing. you need to register an access point. For example like this:

  • APN (access point):
  • Name: blank
  • Password: blank

This is done for Android 4. in the settings, the WIRELESS NETWORKS settings block, the tab.

There you select the item Mobile network.

item “Mobile network” in the tablet settings

Next. Access Points (APN). And there you can create a new point with the parameters of your operator by calling an additional menu by pressing the button with three dots.

Access Point (APN) Settings on Android Tablet

Connecting using a 3G modem

In view of the sufficiently large instructions for this method of connection, I transferred it to a separate article on how to connect a modem to an Android tablet.

In short, you have to switch the modem to modem only mode, disable the PIN code entry on the modem and create an access point with the parameters of your cellular operator. And you may need to get ROOT rights.

Internet connection using a computer via USB

In view of the rather large material on this connection method, I decided to transfer it to a separate article on the site, which is called that, connecting the tablet to the Internet via a computer. I warn you that the method is quite complicated, especially for beginners. And it requires the installation of additional programs on the tablet and on the computer. And also requires root rights.

Internet connection via Ethernet

An exotic way. It is used if you need the fastest internet connection on your tablet. To make this connection, you need a USB to RJ45 adapter and driver. You will have to look for the driver for your tablet yourself, I can only tell you where you can download the USB to Ethernet drivers for the Asus Eee Pad Transformer. Copy the zip archive to the device memory, and install in Recovery mode. In a terminal emulator, enter the commands

READ  How to unlock Lenovo tablet if you forgot your password

Connect the adapter and Ethernet cable to the tablet. Since Android itself does not have support for this type of connection, turn on Wi-Fi.

A video about all the ways to connect your tablet to the Internet.

How to connect a phone to a tablet

Mobile devices have already become a part of our daily life. Each successfully fulfills its tasks, but if a few are “brought together”, then their capabilities will undoubtedly increase. Today we will tell you how to sync your tablet and smartphone. This is the ability to transfer data between them, distribute the Internet, control one device from the screen of another. Since devices based on Android OS implement data transfer at a high level, let’s talk about them. There are several ways to “make friends” two mobile devices. wireless, using a cable.

How to connect your tablet to the Internet

According to statistics, tablets are most often used for surfing the Internet and for working with applications, so it is useful to know how you can connect your tablet to the Internet. There are many models of tablets on the market, the more modern of them have built-in modems for Internet access, the older ones are equipped with slots for SIM cards, with which you can connect to the world wide web. There are also models that can only be connected to the Internet via a Wi-Fi network.

How to connect your tablet to the Internet via your phone


To transfer files from one mobile device to another, Bluetooth technology is often used, which is present in almost any modern gadget. The algorithm is as follows:

  • Make sure this technology is available on both devices. Versions compatible.
  • Activate the Bluetooth module on both devices.
  • On the one from which you want to transfer files, enable device search. Highlight the list.
  • Find the second device, press it, thereby activate.
  • Find the file you want to transfer. Open the window, select the item “Send via Bluetooth”, select the recipient.
  • To allow data transfer, give permission. click “OK”.

Important! To save battery power, when the session ends, do not forget to disconnect the connection, turn off the modules.

The main disadvantage of such a connection is its low speed. The transfer of “heavy” files can take quite a long time. Therefore, for such cases, we recommend using cloud storage (Dropbox, Google Drive, Yandex. Disk). After placing the files there, access is possible from all devices with the Internet.

In addition, through this technology, it is possible to create a VPN connection.

  • To do this, we find, download the BlueVPN program.
  • Launch, open the list of devices, find a smartphone.
  • We click on it, we make the connection.

You can make friends between a smartphone and a tablet using Wi-Fi, but this will no longer be a file transfer, as it was with a Bluetooth connection. Here it will be the reception and distribution of the Internet from one to another.

  • Modem mode is activated in the dispenser.
  • The host starts a search for valid Wi-Fi networks.
  • After detecting the network, it is activated by pressing. If necessary, enter the password that is specified in the settings of the dispenser.

Using this protocol, you can also connect the handheld to the Internet via a “friendly” smartphone. To do this, he must maintain a connection with a 3G, 4G network, and this is embedded in almost any modern device.

Important! For such an action, no additional software will have to be installed on the device. All parameters are set by settings.

  • Mobile gadget settings. go to “Wireless networks”. section “”
  • Activate the “Modem Mode”, switch the “Access Point” switch to the “On” position.
  • That’s it, an access point has been created on the smartphone. It is possible to connect to it from any device that supports the protocol. About parameters. network name, password for access, encryption method. information in the settings.
  • On the handheld, we start the search for available networks, find, connect. Enter the password if necessary.

How to connect from a tablet to a 3G or 4G mobile Internet

To connect to 3G or 4G mobile internet, you need to make sure your tablet has a SIM card slot. If there is a SIM card slot, insert a card of one of the Russian mobile operators with paid mobile Internet access service there.

Select the type of SIM card compatible with your device (“nano” or “micro”)

How to distribute the Internet from Android to a computer or tablet

Difficulty level: for beginners. The need to distribute the Internet from a smartphone to other devices arises quite often, especially in those regions where there is 3G, 4G (LTE) coverage, but there is no wired connection. For example, you went to a dacha, where providers will not be able to lay cables very soon, and you need to connect to the network today. In this case, you can connect your laptop to the Internet via your smartphone, especially if your tariff plan allows you not to worry too much about the volume of traffic.

There are several ways to connect a smartphone and laptop to access the latter to the network: using a USB cable, via Bluetooth or Wi-Fi. The last method is suitable for any combination of devices to be connected, and the first two we will analyze using the example of connecting to a computer running Windows.

How to access the internet from a tablet via Wi-Fi

To establish a connection to the Internet from a tablet computer via a Wi-Fi network, you first need to find out the name of the network to which you want to connect and the password to it. If the network is open, no password is required. Further steps are approximately the same for iOS and Android devices. Let’s first give you step-by-step instructions for connecting devices on the iOS platform to the Internet:

The Settings button looks the same on all Apple devices

In the settings window, select the line Wi-Fi

No password required when connecting to public networks

Android tablets connect to the Internet in a similar way. To connect, do the following:

    Pull the screen down from the top to access quick settings. In the panel that opens, click the Wi-Fi button.

The buttons of the activated functions are highlighted in green

Select the network to which you want to connect the device

How to connect a tablet to the Internet via a 3G modem

If your tablet is not equipped with a built-in 3G module, then you can use external 3G modems. To do this, you need a regular 3G modem, exactly the same one that is used to connect to the Internet in laptops, netbooks and desktops.

Connecting a tablet to the Internet using an external 3G modem is already a little more difficult and there can be a lot of difficulties here. The first thing you need to do is switch the 3G modem to “Modem only” mode. To do this, you need to install the 3GSW program from ZyXel on your PC. After that, connect your 3G modem to this PC, open the 3GSW program and activate the “Modem only” mode.

Next, you need to connect a 3G modem to the tablet using a USB OTG cable and install the PPP Widget application on the tablet.

PPP Widget application is necessary for setting up a connection to mobile networks, since tablets without a built-in 3G module are not equipped with the necessary software. Open the PPP Widget app and enter the access point information, username and password. You can get this data from your mobile operator.

How to connect your tablet to 3G mobile internet

If your tablet is equipped with a built-in 3G module, then you can connect to the mobile Internet. First, you need to purchase a SIM card and insert it into a special compartment on your tablet. Typically, this compartment is located on the side of the device.

After installing the SIM card, you need to enable the “Mobile Data” (or “Data Transfer”) function. As a rule, this is done in the same way as on a regular smartphone. Usually, this is enough for the Internet to work on the tablet. If you have any problems with the connection, then you can edit the settings of the APN access point.

READ  How to use a wacom pen tablet

To do this, you need to open the settings, go to the “” section and open the “Mobile network” subsection.

After that, a small pop-up window will appear in which you need to select “Access Points (APN)”.

Next, you need to click on the button with three dots (in the upper right corner) and select “New access point”.

After that, you will need to enter the data of your operator.

How to connect your tablet to the Internet

A tablet, like any other computer, must be connected to the Internet. Otherwise, its capabilities will be significantly limited, and the user will not be able to use it one hundred percent. In this article, we will tell you how to connect your tablet to the Internet using a WI-FI router, built-in 3G module, external 3G modem, smartphone, laptop and even USB connection to a computer.

How to connect a tablet to the Internet via a WI-FI router

If you have a WI-FI router connected to the Internet and configured at home, then for you the easiest way to connect your tablet to the Internet is to use the WI-FI wireless network. In order to connect the tablet using WI-FI you need to follow these steps.

Make sure that “airplane mode”, or as it is sometimes called “airplane mode”, is turned off on your tablet. In this mode, all wireless connections do not work, so if it is turned on, then you will not be able to use WI-FI.

Open the settings of your tablet and turn on the WI-FI module (if it was disabled).

Go to the subsection of the “WI-FI” settings. Here, in the list of available WI-FI networks, you need to select a WI-FI network from your router.

After choosing a WI-FI network, you will need to enter your login and password to access.

That’s it, this completes the process of connecting your tablet to the Internet. If the WI-FI router has access to the Internet, then it will appear on the tablet.

How to connect a tablet to the Internet via a smartphone

Another relatively simple way to connect your tablet to the Internet is using your smartphone. To do this, you need to open the settings on your smartphone and go to the “Other networks” section.

After that, you need to open the “Modem and Access Point” subsection. In other shells, this subsection may be called differently, for example “Modem mode and access point”.

Next, you need to activate the “Portable Access Point” function (in other shells this function may be called “Portable Access Point”).

Next, you will see a warning about disabling WI-FI. Here you need to click on the “Yes” button.

II. Setting up the modem initialization string

connect the phone to the computer (if you have not already done so);

open Windows Device Manager. If you don’t know how to do this, read the instructions here;

in the Device Manager in the “Modems” section, find your phone, right-click on it and select the “Properties” item in the context menu that appears;

in the “Properties: (modem name)” window that opens, go to the “Additional communication parameters” tab and in the “Additional initialization commands” item write the initialization string. Then click the “OK” button (see image below).

As mentioned above, the initialization string must be found in the service center or on the mobile operator’s website. For example, the initialization string for the “Hyper Active” tariff plan from MTS will look like this:

It is the initialization string that determines which operator’s service you will use. As a rule, each tariff plan has its own line.

Connecting your computer to the Internet
via mobile phone

This article describes how to use a regular mobile phone (not a smartphone) as a modem to connect a Windows computer or laptop to the Internet.

Connecting a computer to the network via an Android smartphone or tablet is described here.

III. Making a connection

The procedure for this step depends on the version of Windows.

in the “Start” menu, follow the path: “Control Panel” ⇒ (“Network and Internet Connections”) ⇒ “Network Connections”;

double-click on the “New Connection Wizard” icon;

in the “Type of network connection” window, check the box “Connect to the Internet” and click “Next”;

at the next stage, select “Set up a connection manually” and click “Next”;

in the “Select device” window, tick the phone modem for which the initialization string was written in the previous step (if there are several modems, it is important not to make a mistake), then click “Next”;

specify the connection name and click “Next”. You can choose any name, for example, Internet;

at the next stage, indicate the phone number that you need to find out from the mobile operator. Most often it is 99 # or 99 #. click “Next”;

at all subsequent stages nothing needs to be changed, press “Next” until the wizard finishes.

in the “Start” menu, follow the path: “Control Panel” ⇒ “Network and Internet” ⇒ “Network and Sharing Center” ⇒ “Establishing a connection or network” ⇒ “Setting up a telephone connection”;

in the settings window for a new connection in the appropriate windows, specify the dial-up number (99 # or 99 #. You need to check with your mobile operator) and the name of the connection (any). As a rule, you do not need to enter a username and password (leave blank);

right-click on the entry button in the “Start” menu and follow the path “Control Panel” ⇒ “Network and Internet” ⇒ “Network and Sharing Center” ⇒ “Create and configure a new connection or network” ⇒ “Connect to the Internet “⇒” Switched “;

in the settings window in the corresponding windows, specify the dial-up number (99 # or 99 #. must be specified in the service center or on the operator’s website) and the name of the connection (any). Leave the username and password blank;

You will need:

Mobile phone with built-in 3G, EDGE or GPRS modem.

Simply put, any modern mobile phone from Samsung, NOKIA, Sony Ericsson or another brand will do.

2.USB cable to connect your phone to your computer.

You can use Bluetooth instead of a cord to connect your phone to your computer. Of course, in this case, the computer and phone must be equipped with appropriate Bluetooth adapters.

Modem driver or synchronizer software for the phone.

The driver is usually supplied on a disk bundled with the phone, and is also available for free download on the manufacturer’s website.

Drivers and synchronization programs for the most popular phone brands can be downloaded from our server:

SIM card of the corresponding mobile operator with the required amount on the account.

The data service must be activated for the SIM card. This question needs to be clarified with the mobile operator, and if the data transfer for the card is disabled. ask to activate it.

You also need to decide on a tariff plan and ask your provider initialization string and dialer number. They will need to be specified in the modem settings, as well as when creating a connection (for images and a description of actions, see below).

The initialization string might look like this: ATCGDCONT = 1, “IP”, “usluga”, only instead of “usluga” it will have a different value (depending on the mobile operator and the tariff plan used).

The dial-up number can be “99 #”, “99 #”, “991 #” or “991 #”. It depends on the brand of the phone, as well as on the mobile operator.

Check this information in the service center or on the website of your mobile operator.

Special attention should be paid to the choice of an operator, since the quality and speed of the Internet connection differ significantly from provider to provider. The speed and quality of communication may also depend on the region of your stay and time of day.

I. Installing the modem driver

To install the driver, you will need a special installer file with the extension.exe or.MSI. Links to pages with such files for Nokia and Samsung phones are given above in this article. Look for drivers for phones of other brands on the websites of their manufacturers.

READ  How to connect Smart bracelet to Samsung phone

The driver is installed in the same way as a regular program.

For more information on what a driver is and how to install it, read here.

Connection stages

If you have all of the above items, you can go directly to the connection. The order of the required actions is as follows.

After creating a connection

Connection setup is complete. Now, to connect to the Internet, it is enough:

Connect your phone to your computer.

To do this, double-click the left mouse button on the connection icon, which is located in the “Network Connections” folder. You can get to the specified folder through the “Start” menu (the path depends on the version of Windows) or in the following way:

on the keyboard, press the Win R key combination (that is, first press the Win button, indicated by the Windows logo and located in the near left part of the keyboard between the Ctrl and Alt buttons, and without releasing it, press the R button. Then release both buttons);

in the window that opens, print or copy the word ncpa.cpl from this page

In the connection window, click the “Call” button and wait for the connection.

In order not to go to the “Network Connections” folder every time, it is advisable to bring the connection shortcut to the desktop. You can learn more about what a shortcut is and how to create one here.

When connecting a computer to the Internet via Dial-up, EDGE / GPRS and some other types of modems, sometimes errors occur, the cause of which can be both malfunctions in the user’s computer or modem, and problems in the work of providers and telecom operators. Now such modems are almost never used, but some readers may find this information useful.

The computer reports an error when the mentioned problems with the Internet connection occur. At the same time, to make it easier for the user to find and eliminate its cause, the message also displays an error number indicating the direction in which to search.

This article will focus on using only Android devices as a computer modem. Read about connecting a computer to the Internet via a simple mobile phone here.

Actually, the procedure for connecting to the Internet directly of the Android tablet (smartphone) itself will not be considered here either, since the solution to this issue, firstly, rarely causes any difficulties, and secondly, it is described in detail on the website of each cellular operator.

If your smartphone (tablet) is already connected to the Internet, you can access the global network from your computer through one of the following methods.

Every computer, laptop, or any other device that connects to the network has a so-called MAC address. This is a unique identifier “sewn” by the manufacturer into its network card.

However, Windows settings can be changed so that the computer’s network card uses a different identifier instead of the hardcoded MAC address.

Why is this needed? For example, many ISPs use the MAC address to identify their computers to provide their services to specific users. If you purchase a new computer, you will not be able to simply connect it to such a network. You will either need to contact your ISP, or change the MAC address of the computer to the one that the previous one had. For obvious reasons, the second option is more convenient.

There can be many other reasons for changing the MAC address.

If you have a router with Wi-Fi installed at home, changing the password for accessing the wireless network is not difficult. The procedure lasts no more than 5 minutes. No additional tools, fixtures or special skills required.

All you need is a computer, laptop, tablet or other device connected to this router. At the same time, it does not matter whether it is connected to it with a power cord or via the same Wi-Fi.

Many of us have a router in our apartment that “distributes” the Internet via Wi-Fi, including outside the home. Unscrupulous neighbors can take advantage of this. over, the Wi-Fi password is not very difficult to find.

If your Internet connection suddenly becomes too slow, it is quite possible that you are out of luck with your neighbors, and they not only connect to your Wi-Fi without permission, but also brazenly use it “to the fullest”, downloading movies and other voluminous content.

It is not difficult to check whether this is so. You just need to go to the appropriate section of the router settings.

Windows Firewall. it is a software tool that monitors all computer network traffic, filtering it according to the rules set by the user. A firewall is also called a firewall or firewall (from the English firewall. Wall of fire).

A firewall is an important means of protecting your computer. It allows you to use different network policies for applications, allowing some programs to access the Internet and denying it to others.

By default, Windows Firewall is always on. But sometimes it can conflict or duplicate the functionality of other software, such as antivirus software used by its own firewalls. In such cases, it is advisable to turn off Windows Firewall so as not to slow down your computer.


Connecting the Internet to the tablet via USB

  • 1. Put the device into USB host mode;
  • 2. Install the package of universal drivers USB Ethernet DriverPack;
  • 3. Insert the cable into the adapter socket, then connect the adapter to your device.

DHCP connection will work when Wi-Fi is activated and PPPOE will also require pppoew.

How to connect a tablet to the Internet via a cable?

Connecting Android devices to a simple cable Internet primarily depends on the hardware capabilities of the device. Let’s consider the main options available to users:

connecting a tablet with a USB connector to the wired Internet

If the tablet has a standard USB 2.0 or 3.0 input for connecting devices (for example, flash drives), then connection is possible through a special adapter (also called a USB network card).

This device looks like an adapter, with a USB plug at one end and an RJ-45 jack at the other.

Is it possible to connect the tablet to the wired internet?

To connect your tablet to the wired Internet, first of all, you need to find out the type of your Internet connection: it can be DHCP or PPPOE connection.

You can find out the type of connection from the contract with the provider or in the 24/7 support service of your Internet service provider.

Also, the sequence for setting up an Internet connection depends on the operating system installed on the tablet: for Windows devices, all are suitable general recommendations for “classic” laptops and stationary PCs.

It is much more difficult to set up a tablet connection to the Internet via USB for Android devices, so here we will look at how to connect a tablet to the wired Internet on this OS.

How to connect your tablet to the Internet via USB?

The solution to the question “how to connect the tablet to the wired Internet” depends on the network equipment, the type of Internet connection and the operating system of the tablet.

Unfortunately, in some cases, a cable internet connection is technically impossible to implement.

The wired Internet is called an Ethernet connection (pronounced “Ethernet”), and the connector for connecting it is RJ-45.

connecting a tablet with an RJ-45 connector to the wired Internet.

As a rule, RJ-45 connectors have so-called “hybrid” devices that combine a tablet and a netbook.

Setting up an Internet connection depends on the type of connection:

Connect the cable to the tablet, then find and activate the Ethernet connection in the device settings.

This type will require separate software. pppoew.

In the program, enter the username and password provided to you by your provider to connect to the Internet. Please note: to use the program, you must have the highest rights in the system.