How to connect a laptop to a Wi-Fi network

via the network icon in the tray

To connect to the network, do the following (valid for Windows 7/8/10):

  • Click on the Wi-Fi icon in the tray (icon with an asterisk (no network).);
  • If everything is in order with your laptop (the adapter is working, the drivers are installed, there are no errors). you will see a list of Wi-Fi networks to which you can connect. One of them should be yours;

Then you click on your network and press the button to connect. By the way, it is highly advisable to check the box next to “Connect automatically”;

In general, such a simple sequence in most cases helps to quickly connect and get rid of the need for a long digging in the settings. If you failed to connect, then further recommendations are for you.

we use the “buttons” on the body of the device

The most popular way to enable Wi-Fi adapter on laptops is special. function key (F2, F3, F12, etc.).

As a rule, to turn on Wi-Fi. just press it (by the way, sometimes you need to press together with the FN button). For example, FNF3.

The photo below shows an example of such a “button”. By the way, please note that some laptops are equipped with an LED on these keys, which helps to determine if your adapter is working.

Button to turn on Wi-Fi on the keyboard

On some laptops, the Wi-Fi adapter button is located above the main keyboard. On the one hand, it is very convenient. you can quickly turn on / off Wi-Fi without tinkering with Windows settings. An example of such a button is shown below.

Acer Travelmate 8371 laptop. Wi-Fi button above keyboard

By the way, in addition to Wi-Fi, buttons for sound, updates, entering the BIOS, etc.

Quite rarely, but still there are laptops where not a button is installed, but a whole switch, and it is located on the side of the laptop (for example, next to some kind of headphone jack.).

Wi-Fi on button on the side of the device // Equipped with some Lenovo, Acer, etc.

By the way, it is very convenient if there are separate LEDs on the laptop case, which are responsible for the operation of the hard disk, Wi-Fi, power, etc. Help you quickly find out what works and what doesn’t.

The LED on the laptop case HP / Wi-Fi adapter works (already good)

The last option. there may not be any buttons AT ALL to turn on / off the Wi-Fi adapter on the device case. In this case, you need to enable it programmatically (more on this below in the article).

By the way, if you use a USB adapter, you will also have to turn it on programmatically, because most of them do not have any buttons to enable Wi-Fi (by default, they should always be enabled, unless disabled programmatically).

Missing driver (driver conflict)

Drivers are often the cornerstone when trying to connect to Wi-Fi networks. The fact is that if they are not available for the Wi-Fi adapter in the system, then all your attempts will be in vain, you simply cannot turn it on.

By the way, as I wrote above, if there is no driver in the system, then open device Manager. You will see that a yellow exclamation mark will be lit in front of this device (by the way, sometimes the device (the same wireless adapter) can be in the “Other devices” tab).

Wireless adapter missing driver

To update the driver on Wi-Fi. I recommend using the tips and programs from the following articles:

  • solving problems with drivers for Wi-Fi (removing, updating, installing);
  • a large collection of programs for updating drivers (updating drivers in automatic mode is much faster and more pleasant ).

via Windows network settings

If your wireless adapter is programmatically disabled, then by clicking on the network icon in the tray (an example of an icon when the adapter is disabled.). You will not see any networks to which you can connect (just no one will find them ). I will consider a couple of options how you can enable it.

through network connections

The easiest way to open network connections in Windows (relevant for Windows XP, 7, 8, 10) is to press the WinR button combination. and enter ncpa.cpl into the “Open” line. Then press Enter.

ncpa.cpl. View all network connections

The section “Control Panel \ Network and Internet \ Network Connections” should open. it will present all the network connections available on the laptop. In general, on any modern laptop, as a rule, at least two network adapters:

  • wireless network (sometimes in English. “Wireless”). this is the Wi-Fi adapter, what we are looking for;
  • Ethernet (network controller or “Network controller”).

If the wireless network icon is colorless (there are no crosses or exclamation marks on the icon. Note: what the “colored” icon looks like. shown below), then the adapter is simply turned off. To enable it. right-click on it and select “Enable”. as in fig. below.

If the wireless icon is colored. but with an exclamation mark (or a cross). right-click on it and select the “Connect” option.

If the adapter works, you will immediately notice it by the fact that the icon has become colored (example below), the status will be something like “Connecting, identifying, checking, etc.”.

By the way, after you turned on the adapter, use the advice from the very beginning of the article (note: “Trying” to connect to Wi-Fi).

via device manager

Another way how you can turn on the Wi-Fi adapter is to open device Manager. find the device you need and click the “Activate” button. I’ll show you with an example.

First, open the Device Manager (in Windows 10. just right-click on START). Universal option: press the WinR combination. enter the command devmgmt.msc and press Enter (example below).

Launches the device manager. devmgmt.msc

Then you need to open the “Network adapters” tab. select your network adapter that you want to enable, right-click on it, and select the “Enable” option from the menu.

Note: The Wi-Fi adapter is most often labeled as “Wireless Adapter”, “Wireless Network Adapter”.

If your Wi-Fi adapter is not in the “Network adapters” tab (or an exclamation mark is lit in front of it). most likely, there is no driver on your device in Windows, and you need to find and install it.

How to turn on Wi-Fi on a laptop and connect to the network

Hello!

Today Wi-Fi networks have entangled all major cities, there are routers in almost every apartment where there is a computer or laptop. However, connecting a laptop to the Internet is not always rosy and easy (as you understand, today the article will be about this ☝).

In general, the first thing a laptop user needs to do is check the Wi-Fi adapter, whether it is on, whether it works.

With this, many have all sorts of questions, especially if the power button suddenly does not appear on the device case (even worse, if, in addition, there is no function key on the keyboard).

In this short article, I’ll show you how to check and enable the Wi-Fi adapter, and then connect your laptop to the network.

Connecting the laptop to a wireless network

In this section, you will learn how to set up WI-FI on a laptop on which you decided to install Windows 7, as well as how to connect it to a home network that has an appropriate Internet connection.

After turning on the laptop and waiting for the OS and all necessary services to be fully loaded, you should pay attention to the taskbar. If the laptop has a wi-fi connection, a special icon is displayed in the corner of the screen. By the way the icon looks, you can see whether the laptop is connected to the network or not.

If you need to check if there are any available connections, you need to left-click the mouse on the icon, and then select the network you need.

You may be required to authenticate, i.e. introducing the security key. After entering the correct password, your device will be connected to the Internet.

In some cases, when the laptop is turned on, the wi-fi connection icon is not displayed. This indicates that the wi-fi module on the laptop is not working or is turned off. On some laptop models, you can turn it on by simply pressing the corresponding button on the device case, and in some cases, the module must be turned on programmatically.

To programmatically enable the wi-fi module, you need to go to the Control Panel, where you need to find Network and Internet and Network Connections. Next, we see the wireless network connection icon, on which we right-click on the manipulator and select “enable”.

READ  How to stream from phone to laptop

After these manipulations, the wi-fi connection icon in the taskbar should appear. If this does not happen, then you need to check the installation of drivers on the wi-fi module. This can be done by installing the drivers from the disk that comes with the laptop or by downloading the drivers from the Internet, referring to the developer’s website.

After installing or updating the drivers, the module should turn on, as evidenced by the appearance of its icon in the tray.

Now you should select the Network and Sharing Center category, for which you use the control panel and configure automatic obtaining of an IP address.

Then you need to find and select the following item in the menu: Changes to the adapter parameter.

Select the required network, then move the cursor over Properties and confirm the selection by clicking the mouse. In the newly opened window, select Internet Protocol version 4 (TCP / IPv4) and click Properties.

After this procedure, the next category opens, where you already select the item to automatically obtain an IP address and automatically obtain a DNS server address. We confirm our actions, as before, with the help of “Ok”, which is located at the bottom of the window.

Now it remains to connect to the wireless network, as described earlier and check the Internet connection.

How to connect a laptop to Wi-Fi without involving professionals

Wireless wi-fi networks are widespread not only in offices and Internet clubs, but also in ordinary city apartments. With the help of such a connection, you can access the Internet through personal computers, tablets and smartphones, yes, in general, using any device equipped with a wi-fi module. Despite the abundance of such devices, laptops have the largest number of such wireless connections. How to connect a laptop to wi-fi and what problems may arise in this case and will be the topic of our publication.

The process of creating a wireless Internet access point consists of several steps:

  • Router connection
    First of all, connect the existing RJ 45 connector of the cable through which the provider connects the equipment to the network to the wan connector of the router. As a rule, such a connector is located separately from the others and is painted in a different color. Use the instructions for the router that came with the device. Now you need to connect the adapter of the device with a 220V outlet and a laptop, after which you need to turn on the router itself.
  • Configuring the router.
    It makes no sense to describe the setup process, each manufacturer has a setup menu and a different principle of operation. It is best if professionals are involved in these issues.
  • Setting up wi-fi and then connecting the laptop to the intended access point. And here we will dwell in more detail.

Setting up WI-FI on a laptop with Windows XP

The Windows 7 operating system is quite well optimized for maximum ease of setting up communications. In Windows XP, the process of setting up and performing other tasks is almost the same.

  • Turn on the wi-fi module in your laptop.
  • When the icon appears in the tray, double-click on it with the left mouse button. A window will appear in which you should click Search for wireless networks.
  • As a rule, a list of available points appears below that you could connect to.
  • If it was not possible to connect in this way, then you should enable the wireless network connection through Start. Control Panel. Network Connections.
  • The next step is to view the available wireless networks.
  • How to select the line in the seven Change the order of preference of networks.
  • In the newly appeared window, select Network by access point and check the box next to “Automatically connect to the network”.
  • The next thing to do is to go to Wireless networks again and click Refresh list.
  • Then specify the required network, click Connect and enter the access key.

Major connectivity issues

In truth, we have already covered the main problems with connecting a laptop. So why the laptop does not see WI-FI, despite all the operations performed. There are many reasons for this, and the first one that few people pay attention to is a weak transmitting signal. That is why in the first part of the article it was mentioned the location of the router.

Often a problem with wireless access is due to a failed wi-fi module. Any “dancing with a tambourine” is useless here. Only the service center or the use of an external wi-fi module can help.

One of the most common problems that can occur when connecting a laptop to a wireless network is incorrect router configuration.

Configuring an access point yourself and connecting your equipment to it requires certain knowledge. The best way out would be to call a specialist from the support service of your provider or contact a company specializing in this.

© 1999-2021 System Technologies
Chelyabinsk, Kyshtym, 7A
7 (351) 799-59-03

How to connect a laptop to a Wi-Fi network. Why Wi-Fi may not work on a laptop

Today, Wi-Fi is available in almost every apartment that has a computer (even providers, when connecting to the Internet, almost always install a Wi-Fi router, even if you only connect 1 stationary PC).

According to my observations, the most common problem with the network for users when working with a laptop is to connect to a Wi-Fi network. The procedure itself is not complicated, but sometimes even in new laptops, drivers may not be installed, some parameters that are necessary for the full operation of the network (and due to which the lion’s share of the loss of nerve cells occurs :)).

In this article, I will take a step-by-step look at how to connect a laptop to some kind of Wi-Fi network, and so I will analyze the main reasons why Wi-Fi may not work.

If the drivers are installed and the Wi-Fi adapter is on (i.e. if everything is fine)

Solve wifi connection problem in Laptop & Computer | How to enable network connection in Windows 7

In this case, in the lower right corner of the screen, you will see the Wi-Fi icon (without red crosses, etc.). If you click on it, Windows will inform you that there are available connections (i.e. it found a Wi-Fi network or networks, see the screenshot below).

As a rule, to connect to the network, it is enough to know only the password (we are not talking about any hidden networks now). First, you just need to click on the Wi-Fi icon, and then select the network to which you want to connect from the list and enter the password (see screenshot below).

If everything went well, then you will see a message on the icon that access to the Internet has appeared (as in the screenshot below)!

By the way. if you are connected to a Wi-Fi network, and the laptop says that ” there is no access to the Internet.” I recommend reading this article: https://pcpro100.info/error-wi-fi-win10-no-internet/

Why is there a red cross on the network icon and the laptop does not connect to Wi-Fi

If not everything is in order with the network (more precisely, with the adapter), then on the network icon you will see a red cross (how it looks in Windows 10 is shown in the photo below).

In case of such a problem, for a start I recommend paying attention to the LED on the device case (note: on the case of many laptops there is a special LED that signals Wi-Fi operation. Example in the photo below).

On some laptops, by the way, there are special keys for turning on the Wi-Fi adapter (these keys usually have a characteristic Wi-Fi icon). Examples:

  • ASUS: press the combination of FN and F2 buttons;
  • Acer and Packard bell: FN and F3 buttons;
  • HP: Wi-Fi is activated by a touch button with a symbolic antenna image. On some models, the shortcut keys: FN and F12;
  • Samsung: FN and F9 buttons (sometimes F12), depending on the device model.

If you do not have special buttons and LEDs on the case of the device (and those who do, and the LED does not light up), I recommend opening the device manager and check if there are any problems with the driver on the Wi-Fi adapter.

The easiest way: open the Windows control panel, then write the word “manager” in the search box and select the desired one from the list of results found (see screenshot below).

In the device manager, pay attention to two tabs: “Other devices” (there will be devices for which no drivers were found, they are marked with a yellow exclamation mark), and on “Network adapters” (here there will be, just, a Wi-Fi adapter, which we are looking).

READ  Installing the operating system on a new laptop

Pay attention to the icon next to it. For example, the screenshot below shows an icon for a device that is turned off. To enable it, you need to right-click on the Wi-Fi adapter (note: Wi-Fu adapter is always marked with the word “Wireless” or “Wireless”) and enable it (thus it turns on).

By the way, pay attention, if an exclamation mark is on against your adapter, it means that the system does not have a driver for your device. In this case, you need to download and install it from the device manufacturer’s website. You can also use the specials. driver finder applications.

Important! If you have problems with the drivers, I recommend that you read this article here: https://pcpro100.info/obnovleniya-drayverov/. With it you can update drivers not only for network devices, but also for any other.

If everything is in order with the drivers, I recommend that you also go to Control Panel \ Network and Internet \ Network Connections and check if everything is in order with the network connection.

To do this, press the WinR button combination and enter ncpa.cpl. and press Enter (in Windows 7, the Run menu is the md START menu).

Next, a window will open with all network connections. Pay attention to the connection named “Wireless Network”. Turn it on if you have it turned off (as in the screenshot below. To turn it on, just right-click on it and select “enable” in the pop-up context menu).

I also recommend going to the properties of the wireless connection and see if the automatic obtaining of an IP address is enabled (which is recommended in most cases). First open the properties of the wireless connection (as in the picture below)

Next, find in the list “IP version 4 (TCP / IPv4)”, select this item and open the properties (as in the screenshot below).

Then set the automatic acquisition of the IP address and DNS server. Save and reboot your PC.

Wi-Fi managers

Some laptops have special managers for working with Wi-Fi (for example, I came across these in HP laptops. Pavilion, etc.). For example, one of these managers is HP Wireless Assistant.

The bottom line is that if you don’t have this manager, Wi-Fi is almost impossible to run. I don’t know why the developers are doing this, but you want it or not, and the manager will need to be installed. As a rule, you can open this manager in the START menu / Programs / All programs (for Windows 7).

The moral is as follows: check on the official website of your laptop manufacturer to see if there is such a recommended manager for installation among the drivers

By the way, many are neglected, but Windows has one good tool for troubleshooting network problems. For example, somehow for a long time I struggled with the incorrect operation of the flight mode in one laptop from Acer (it turned on normally, but to turn off it took a long time to “dance.” So, in fact, he got to me, after the user was unable to turn on Wi-Fi after this flight mode).

So, to get rid of this problem, and many others, such a simple thing as troubleshooting helps (to cause it, just click on the network icon).

Next, the Windows Network Diagnostic Wizard should start. The task is simple: you just need to answer the questions, choosing one or another answer, and the wizard at each step will check the operation of the network and correct errors.

After such a seemingly simple check, some of the network problems will be resolved. In general, I recommend trying.

On SIM, the article is complete. Have a good connection!

How to connect laptop to laptop via Wi-Fi

If you just bought a new laptop, and all your data is still on the old computer, transferring files to the new computer takes time if you do it the old way. from laptop to USB stick and from USB flash drive to new device.

Now you can try to make the best way to transfer data from laptop to laptop without the need for additional tools and settings such as data cables or routers.

The only requirement is that one of your computers must be running Windows 7. Instructions for Windows 10 are further on the list. If this is the scenario, you can transfer files through making a WI-FI Ad Hoc network connection between two laptops. On an ad hoc network, each node redirects data to other nodes, and target nodes are dynamically discovered based on the internet connection.

Create a wireless ad hoc network for Microsoft Windows 7

On a Windows 10 computer, open the Control Panel Network and Sharing Center.
In the window, click “Create and configure a new connection or network”.

In the new dialog box that appears, select “Configure ad-hoc wireless network (computer-to-computer)”.

Click Next twice and you will be prompted to enter a network name and select a security profile. Choose any name you like and choose “Security Type” as WPA2-Personal. Also enter the password that must be entered by other hosts trying to connect to this computer (You can also choose an open network, but this is not recommended for security reasons. Anyone on your premises can access your shared files).

Then click Next and your ad-hoc network will be ready to use. In your bat task click on network notifications and it will be like below.

To connect other computers to your network, they only need to search for a WI-FI connection and connect to it by entering a password.

How to connect laptop to laptop via Wi-Fi: the basics

We have almost all of our today’s laptops equipped with a WI-FI adapter, so it’s easy to set up a wireless connection between two or more laptops. In this article, I will show you how to set up an ad hoc network to transfer files between two computers.

Let’s find out how to connect a laptop to a laptop via Wi-Fi.

HOW TO ADD AN INTERNET CONNECTION?

To share a data connection that you have already connected, right-click it and select Properties. Select the sharing tab and check the box “Allow other network computers to connect through this computer’s internet connection” and click “OK”.

That’s all. Now that you’ve learned how to connect laptop to laptop via Wi-Fi with other helpful guides: How to Boost Wi-Fi Signal at Home? Or how to connect a laptop to a TV via Wi-Fi.

Transfer files between devices via Wi-Fi

You are now set to transfer files from PC to PC. To share a file or the folder itself, open Windows Explorer, navigate to the desired location, right click on the folder / file, look down to open the Share section with Homegroup (Read / Write), click on it You have now shared the item on your computer over the network. Linked nodes can be copied from or written to a folder.

How to connect laptop to laptop in Windows 10

This version of Windows makes it a little easier to create an ad-hoc network when comparing this procedure to earlier Windows operating systems. If you want to set up an ad-hoc network manually without using any other software other than what Windows has, follow these steps:

Open a command prompt by pressing Windows X, select Command Prompt and enter this command, replacing the italicized jobs with your own network name and wireless password:

netsh wlan set hostednetwork mode = allow ssid = network name key = password

You can now connect to this network from another laptop. Also, if you need to suspend the network, enter the following command:

netsh wlan stop hostednetwork

In Control Panel, go to \ Network and Internet \ Network Connections \ and go to the Sharing tab of the network connection properties (right-click to find Properties) to check the box next to Allow other network users to connect via the Internet. connection of this computer “

Select ad-hoc network connection from the dropdown menu and OK from any open prompts.

We hope you figured out how to connect a laptop to a laptop via Wi-Fi. This is a very useful feature that can come in handy when creating a home work network or simply quickly transferring files between devices at home without wires. If you know additional ways to connect a computer to a laptop via Wi-Fi. write them in the form of comments.

Also, be sure to share the link on your social networks.

Wi-Fire 1

With Wi-Fire mobile Internet you can communicate online, follow the news while on the road

Selecting, connecting and configuring a Wi-Fi adapter

Let’s figure out how to connect a desktop computer to Wi-Fi with the least chance of problems during the connection process.

READ  How To Increase Ram On A Laptop

Let’s decide on the type of Wi-Fi module used. The newer the stationary computer and the “fresher” the operating system installed on it, the higher the chance that the device will be recognized by the system and will work without additional settings. To exclude the possibility of problems with drivers, we recommend that you contact your provider, and, regardless of the choice in favor of an external or internal module, purchase a device accompanied by a set of drivers that ensure its operation.

For most situations, using an external Wi-Fi module as a solution to the question of how to connect a computer to Wi-Fi wirelessly is the most preferable one. Therefore, further connection will be considered primarily for external modules.

  • Connect an external Wi-Fi adapter to your PC’s USB port. We recommend choosing the port located on the back of the computer.
  • After the device is detected by the system, it will notify you of the required actions. If, according to our recommendations, you have chosen a Wi-Fi adapter complete with drivers for your operating system. insert the disc into the CD / DVD drive and follow the autoloader instructions.
  • Restart your computer after finishing driver installation.
  • After rebooting, find the icon of a working wireless adapter in the lower right corner of the desktop and double-click on it. In the menu that opens, select your home wireless network by name and enter the password to access it.
  • Congratulations! If accessing sites via Wi-Fi is fine, you’ve just made sure that you can connect your computer to Wi-Fi without having to use the services of a network engineer.

How to connect a PC to Wi-Fi: what is the problem and how to solve it

After building a home Wi-Fi network that unites laptops, mobile phones and tablets, the owner of a stationary personal computer has a question: how to connect a computer to Wi-Fi. Most often, such a PC was previously connected directly to a network cable, and it does not have a built-in wireless module.

You can solve the problem in the following ways:

  • installation of an additional router, followed by a wired connection to the PC. Advantages. the ability to significantly increase and improve the quality of wireless home Internet coverage. The main disadvantages are the high cost of the router; experience with configuring bridge-type routers is required;
  • Another option for connecting a PC to Wi-Fi is to connect the built-in Wi-Fi module. In doing so, you create a stable wireless connection between the PC and the wireless network. The only drawback is the need to dismantle the cover of the system unit and the skills to install devices into the PCI bus;
  • the best option is to use an external Wi-Fi module, also known as a “Wi-Fi flash drive” or “whistle”. Its advantages are a low-cost solution, does not require special skills, and provides stable computer access to the network.

Frequently asked Questions

Benefits of Built-in Wi-Fi Connectivity?

Most computers detect them and find the drivers they need to work, regardless of the operating system. Since such modules are equipped with additional antennas, they can also be recommended for networks in which a stationary PC is located at a considerable distance from the router.

Is there an alternative way to connect a PC to Wi-Fi?

Residents of Moscow and the Moscow region using the Wi-FiRE Internet provider can, instead of independently setting up access to Wi-Fi networks from stationary PCs, call a network engineer to professionally install internal or external Wi-Fi adapters, install drivers, set up and connect a stationary PC to a Wi-Fi network.Fi.

Call by phone and get a free consultation and selection of an adapter with subsequent installation and configuration of the device in a PC at a convenient time for you!

The tariffs and services of Net By Net Holding LLC may be changed by the operator. Full up-to-date information on tariffs and services. in the “tariffs” section or by phone indicated on the website.

Wi-Fire 1

With Wi-Fire mobile Internet you can communicate online, follow the news while on the road

How to connect a laptop to WI-FI

How do I connect my laptop to Wi-Fi? This question is asked by many people in cafes, restaurants, metro, seeing the inscription “Wi-Fi free”. If several people use a stationary computer, you have to use a home Wi-Fi router. Let’s figure out how to connect to the nearest Wi-Fi.

How to connect a laptop to the Internet via Wi-Fi

Connecting a laptop to a properly configured Wi-Fi router is not a super task. With the adapter driver installed on the laptop, this will not cause any difficulties. You will need:

  • included laptop wifi module
  • available wireless networks within its range
  • knowledge of the name and password of Wi-Fi

If the Wi-Fi module is turned off, under Windows, a monitor icon with a network cable and a red cross on top will be displayed in the notification bar. From the “Control Panel” go to the “Network and Sharing Center”. Right-click on “Wireless Network Connection”, then “Enable”. On Mac OS, a blank Wi-Fi icon is visible in the menu bar. Click it, select “Turn on Wi-Fi”.

The module is working. Click on the WI-FI icon in the menu bar to select an available network from the list. Connect to it if the network is not password protected. If there is a password, there will be a lock next to its name. When trying to connect to the network, pay attention to the window that appears asking for a password. For example, this will happen when using the Internet from home, because your access point is protected from neighbors. Enter the correct password.

How to connect a laptop to the Internet via WI-FI if the network is hidden. In the Windows Network and Sharing Center, click Set up a new connection or network, Manually connect to a wireless network. Knowing the characteristics of the hidden WI-FI network, follow the instructions. The steps are similar for Mac OS. Click the “Connect to another network” item under the Wi-Fi list.

How to connect laptop to laptop via WI-FI

When playing multiplayer with friends, you don’t have to go online. Set up a wireless network on one device, find it on the other and connect.

When running laptops on Windows, in the “Control Panel” go to “Network and Sharing Center”, “Change adapter settings”. Right-click on “Wireless Network Connection”, “Properties”. In the Internet Protocol Version 4 (TCP / IPv4) settings, select Obtain an IP address automatically. The same procedure on the second laptop.

Run the distribution on any of them. Write in the command line (“Start”. “Run”. “cmd.exe”):

netsh wlan set hostednetwork mode = allow ssid = key =
netsh wlan start hostednetwork

To share a network from a Macbook, click the Wi-Fi icon in the menu. Click “Create a network”, fill in the invented name and select the occupied channel. Join the created grid.

How to connect a laptop to Wi-Fi if the network adapter driver is not installed?
Find the adapter in Device Manager and make sure the driver is not installed. If there is a yellow exclamation mark next to the name or it is incorrectly detected, run the Installation Wizard through the “Troubleshooting”. Download the driver for free from the manufacturer’s official website.

How to connect your Laptop to Wifi

How to connect laptops via Wi-Fi if they have different operating systems?
Create a network on one device as described above for Windows or Mac OS. The operating system of the other device does not matter.

What to do if the advice didn’t work for me?
Contact a professional as your computer may be faulty.

The tariffs and services of Net By Net Holding LLC may be changed by the operator. Full up-to-date information on tariffs and services. in the “tariffs” section or by phone indicated on the website.