Wireless mouse won’t connect to laptop

Wi-Fi mouse

  • If you are not sure if Wi-Fi is working on your computer, check if the PC has an appropriate Wi-Fi receiver in the Device Manager (using the method described above for Bluetooth).
  • Similarly, activate the Wi-Fi module at the bottom right on the desktop, only not through the Bluetooth icon, but through the corresponding Wi-Fi icon.
  • Find the mouse in the proposed list of detected devices and point to it.

Instructions for connecting via adapter

A wireless mouse adapter usually looks like a small, freeform piece of plastic, most often rectangular, with a metal USB connector protruding from it. This standard is usually called just that. “for a USB mouse”. Modern adapters are very small in size and practically do not protrude from the laptop case. But the small size can also be a problem. if the adapter is lost, it is difficult to find it.

In some models of mice, the adapter is not separately in the package and does not fit into the mouse from the outside, but is hidden in the battery compartment (bottom). The adapter can only be removed by opening the compartment.

Detailed connection instructions are as follows:

  • First, you need to provide the mouse with energy, because it does not receive power over the wires. We insert the batteries. The battery cover usually opens through the bottom of the mouse, although there are also unusual designs with a cover on the back or side.
  • Now we need to provide communication between the PC and the mouse. Insert the USB adapter into any free slot:

wireless, mouse, connect, laptop

  • If necessary, change the mouse settings. for the left hand, cursor movement speed, PC reaction time to double-clicking the mouse button, etc.
  • In the following video, you can clearly see the unpacking of a new wireless mouse and its connection to a laptop via an adapter:

    After connecting the mouse, you need the Honor’s signal reception range. Most likely, you will not be able to control the cursor on the screen if the distance from the mouse to the adapter / laptop is more than 20 meters.

    How to connect a wireless mouse without an adapter?

    Wireless mice without an adapter are designed to have a Bluetooth or Wi-Fi receiver in your laptop. What type of transmitter is built into your mouse should be indicated in the description and also written on the packaging. Instead of Bluetooth, an abbreviation can be written, for example, BT 5.0. Your laptop must have the correct type of receiving device. The advantage of such mice is that the adapter will not be lost, because it simply does not exist.

    Is it possible to connect a wireless mouse without an adapter?

    Yes, if the mouse was originally designed to work without an adapter. If your mouse must have an adapter (USB mouse), but for one reason or another it does not, then, most likely, the problem cannot be easily solved. There are several ways to exit:

    Bluetooth mouse

    To connect a Bluetooth mouse on the laptop, the Bluetooth signal reception mode must be enabled. You can first check if the Bluetooth module is present and if it is working properly (if you are sure that it is, then the continuation of the paragraph can be skipped). Check its status in Device Manager. For example, for Windows 7, this is done in one of the following ways:

    • Right-click on “Computer”, then “Properties”. Select “Device Manager” in the left column;
    • Press the combination “WinR” on the keyboard, enter the command “devmgmt.msc”, “Enter”.

    This means that your computer is ready to work with Bluetooth devices, so you can follow these steps to connect your mouse:

    Activate Bluetooth signal reception. Most laptops have a special key for this (with a drawn Bluetooth symbol) or a combination, most often with the “Fn” key. If the manufacturers did not provide such a separate key, find the icon in the form of a stylized letter “B” at the bottom right of the “Desktop”, right-click on it and select “Enable adapter”:

    So the Bluetooth receiver is activated. Now let’s connect a mouse to it. Right-click on the Bluetooth icon again and select “Add device”:

  • It remains only to point to our mouse.
  • The video below will help you turn on Bluetooth if you have any difficulties:

    How to choose a connection method?

    The wireless mouse differs from the wired model in the absence of a wire that transmits signals to the PC when the mouse is moved and a button pressed. However, the computer must somehow receive signals from your tailless mouse. The mouse transmits these signals by radio. To receive radio signals, you can use a special separate device (adapter-receiver) or such a device can be inside the PC. Therefore, all wireless mice are divided into two types: with an adapter (which must be inserted into the PC) and without an adapter. The choice of connection method depends on the type of your mouse (see also. how to choose the right mouse).

    Wireless mouse connection instructions

    A wireless mouse is purchased for a laptop, but many desktop PC users also prefer the “wireless” option. For example, if the PC is connected to a TV, it can be used as a kind of remote control. Next, let’s look at how it connects, what errors can occur, and how to deal with them.

    Why the wireless mouse won’t connect and what to do?

    After completing the operations, most mice will immediately start working, but sometimes a simple connection is not enough. In this case, it is worth considering the possible reasons why the mouse may not work, as well as how to troubleshoot the problem.

      The most common reason is that the batteries have simply run out, so even with a successful connection, the mouse does not work. This can be a problem if it’s already late at night and the mouse is not working and there are no spare batteries.

    What to do? Take care of this issue beforehand. Buy a battery pack and don’t forget to renew your stock. In addition, some mice do not have ordinary batteries inside, but rechargeable batteries, and they come with a USB to mini-USB cable. Such mice can be recharged by plugging the cable into the USB connector (the mouse works normally at the same time), and after recharging, you can remove the cord and use such a wireless mouse for a long time. Perhaps this is the best solution.

    Another easy option is to have a spare regular wired mouse, which will help you out in case the wireless fails.

  • Your mouse may require a driver installation to work. If there is a small disc in the package with the mouse, insert it into the disc drive and follow the instructions. Sometimes there is no disk, but the manufacturer of the mouse prints a link to the site with the drivers on the package in large print. Enter the link into the address bar of your browser and search for your model. If you cannot cope with the driver installation yourself, contact a specialist or service center.
  • There are also models where the mouse and adapter need to be synchronized. Until this operation is done, the mouse will not work. This is done so that the signals of several mice in the same room do not overlap, interfering with each other.
  • What to do? The adapter usually has a well-defined sync button, sometimes a tiny indicator light. And a small hole is made in the mouse, inside which there is a small button. The button can be pressed with a match or paper clip. So, first press and do not release the button on the adapter (if there is an indicator, it will light up). Now click the sync button on the mouse. Both described buttons must be pressed at the same time, hold them down for a few seconds.

  • Check if your USB mouse adapter is in place. It may sound strange, but sometimes you can forget about the existence of the adapter. And it is necessary. And your child or pet can pull out the adapter while playing.
  • The USB port may be out of order. You can try to rearrange the adapter to a different, obviously working (tested) port. Another option is to find out if the USB ports on the PC work at all, maybe they are disabled through the BIOS or uninstalled. Check the status of USB ports in the “Device Manager”.
  • Not all laptop models support Bluetooth, so it will not be possible to connect a BT mouse. What to do? Have an external Bluetooth adapter if you have one. For a Wi-Fi mouse, an adapter is unlikely to be needed. almost every laptop is equipped with a Wi-Fi receiver and can work with such a mouse.
  • The pointing device buttons are almost unresponsive when pressed

    Here the problem is already associated with the mouse itself, that is, at the hardware level. It is possible that due to the large number of pressing, the button or buttons failed, or you pressed them so hard that they went out of order due to your fault. There is an option that dirt got inside and this does not allow the button to function normally, you will have to disassemble the mouse and see. If no dirt is found, then, most likely, you need to replace the micro button, which requires appropriate knowledge.

    If the manipulator cursor is not stationary

    This is not such a difficult problem, perhaps the sensor is clogged with dirt, dust, something stuck and prevents the cursor from hovering over objects normally. I advise you to wipe the mouse completely, starting with the sensor.

    READ  How to turn on Wi-Fi on an HP laptop

    What to do if the mouse does not work when connected to a computer or laptop

    A computer mouse is an integral part of the system. Some people have such a case when the mouse either starts to work badly or completely fails, and in Windows this thing is very necessary. I think many people have asked the question, is it possible to somehow fix the mouse, or just fix the problems in the system due to which it does not work? Of course you can, and now we will try to resolve this issue.

    Many of you probably know that there are several types of connecting the pointing device to a computer or laptop. PS / 2, USB, Bluetooth and Wi-Fi. Thus, the first two are wired keypads, and the second two are wireless. Everyone can have their own malfunction.

    Troubleshooting recommendations for all manipulators

    What to do if the mouse still works, but is unstable, for example, it turns off and then turns on again?

    When connecting the pointing device via USB, you should take another USB cable. If your operating system has been installed on your computer for a very long time and has not been updated, then this can cause unstable operation of the manipulator, it is also possible that many other manipulators were connected to the computer, as a result of which there was a conflict between the drivers.

    Try plugging the mouse into a jack on another computer and if everything works well, then the problem is in the USB controller.

    You can try to reinstall the mouse driver using the keyboard, for this you press the WinR shortcuts and enter the command mmc devmgmt.msc.

    We got to the device manager. Now you need to press the Tab key so that you can navigate using the arrows. Scroll down to the item “Mice and other pointing devices” to open the list, press the arrow to the right.

    Move to the desired device and press Enter, a window will open where you need to hold down the Ctrl and Shift keys, and then pressing the Tab key move to the “Driver” tab, then just press the “Tab” button and move to the “Delete” button. Press Enter and confirm the action.

    Restart your computer or laptop, and then re-insert the mouse, the driver should be reinstalled and it is possible that everything will work.

    Several individual problems for manipulators

    If you have a wired manipulator, then the most common causes of failure are related to the wire that is kinked or torn. Examine the cable carefully for damage.

    What should I do if my wireless mouse doesn’t work? If these types of manipulators operate on batteries, then it is quite possible that they have sat down. Replace them. If the problem is not related to food, then you will have to look for the problem yourself. Some of the types of problems described above may also apply to wireless keypads.

    Another disadvantage of wireless pointing devices is that they can conflict with similar frequencies of other devices, it can be anything. a smartphone, tablet, TV, refrigerator, router, etc.

    The biggest problem for computer mice is that many of them are not shockproof, if you dropped the mouse a couple of times, then do not be surprised that it is out of order or does not work well. Not every manufacturer uses high-quality parts for the manufacture of a manipulator, so take good care of things.

    This is the end of this article. If you have any questions, do not hesitate to ask them.

    How to connect a wireless mouse to a laptop

    Using a wired mouse with a mobile device such as a laptop is not very convenient. Therefore, for a laptop, users are increasingly choosing wireless mice.

    But, after purchasing such a device, there are often difficulties with the connection. If you also find yourself in such a situation, then this material should help you. Learn how to connect a wireless or Bluetooth mouse to your laptop.

    Connecting a wireless mouse with radio communication

    Modern wireless mice come in two types. These are mice with radio communication, which operate at a frequency of 2.4 GHz, and mice that use a wireless Bluetooth network. First of all, we will consider connecting wireless mice with radio communication. Since this type of mouse is more common, mainly due to the low price and ease of connection.

    Before connecting a wireless mouse to a laptop, you need to make sure that the batteries are installed in it. To do this, turn the mouse over and open the battery compartment. If the mouse is new, the battery can be installed using a plastic gasket, which must be removed before using the mouse. You also need to make sure the mouse is turned on. To do this, you need to check the switch on the underside of the mouse, it must be in the “ON” or “Enabled” position.

    To connect a wireless mouse with radio communication to a laptop, a special receiver or a so-called “dongle” is used. This is a small device that connects to the USB connector and provides a wireless connection between the mouse and laptop.

    Usually the receiver is hidden in the body of the mouse itself. It can be found on the underside of the case or in the battery compartment. Remove the receiver from the mouse and plug it into any USB port on your laptop.

    This completes the connection of the wireless mouse with radio communication. Wait a few seconds for the Windows operating system to install the drivers and test the mouse.

    If the mouse does not work, then check the batteries and the power button again. If all else fails, then read the connection instructions, which should come with any mouse. Perhaps your mouse model has some features that Honor needs when connected.

    Connecting a wireless mouse via Bluetooth

    Connecting a wireless mouse using a Bluetooth wireless network is a little more complicated and may differ depending on your version of Windows. In this article, we will show you how to do this in Windows 10, since most new laptops come with this operating system.

    As in the previous case, you need to start by checking the batteries and the power button. Make sure the mouse has working batteries installed and the power button is in the “ON” or “Enabled” position.

    After that, you need to turn on Bluetooth on your laptop. To do this, open the “Options” (Win-I) menu, go to the “Devices. Bluetooth” section and enable the corresponding option there.

    After turning on Bluetooth, click on the link “Other Bluetooth settings”, which is located just below.

    In the window that opens, you need to enable all available parameters and click on the “OK” button.

    After that, in the “Options” window in the “Devices. Bluetooth” section, your Bluetooth mouse should appear. If the mouse does not appear, then you may need to click on the connect button, which is located on the underside of the mouse case.

    After the mouse appears in the “Options” menu, you just need to click on it and click on the “Link” button. This will start the process of connecting the Bluetooth mouse to the laptop.

    A few seconds after clicking on the “Connect” button, the wireless mouse should work.

    If the connection fails, then check the power button and batteries. Also read the instructions that came with the mouse. Perhaps your mouse has some features that were not taken into account in this material.


    We start connecting the wireless mouse to the laptop by installing the batteries. Any manipulator of this class operates on two standard finger-type batteries. They are usually included, but there are exceptions. In this case, you need to check with the seller at the stage of purchase. If they are not, then you need to additionally purchase two such batteries. Then we find on the mouse the cover from the battery compartment and open it. At the bottom, it shows the polarity of the installation of the batteries. Fulfilling this condition, we install them, and then close this compartment.

    How to connect a wireless mouse to a laptop without problems?

    Often, after buying a new pointing device, the question arises of how to connect a wireless mouse to a laptop without any problems for a novice user. As practice shows, there is nothing difficult in this, everyone can cope with it. This article will provide a step-by-step guide that will allow you to solve this problem without any problems.

    Installing the receiver

    The second step in answering the question of how to connect a wireless mouse to your laptop is to install the transmitter. It is equipped with a rectangular USB connector, with its help information is transferred from the manipulator to the computer. After opening the package, we find it. In some mice, it can be hidden in the battery compartment (this is a miniature device that can easily fit there). Next, we find any rectangular USB socket on the laptop and install it.

    Advantages and disadvantages

    Wireless manipulators have a number of advantages: easy to use (no need to pull wires and worry about the fact that their length will not be enough), work on almost any surface (the exception is glass, on which the optical sensor does not function), simple and easy to set up and operation (most often the operating system itself finds drivers and installs them, the user does not take any part in this). Therefore, when buying a new mouse, more and more users turn their attention to just such devices. They have one minus. the batteries are periodically discharged, they need to be replaced with new ones. This is the most common reason a laptop cannot see a wireless mouse.

    READ  Laptop Can't See Nvidia Graphics Card


    After installing the receiver, the installation of the required software is automatic in most cases. In this case, a message appears in the lower right corner of the screen that a new device has been found, its configuration is in progress. Then you will see a notification: “The new device is installed and ready to work.” This indicates that the software adjustment is complete. The manipulator should now work. That is, when you move it over the surface, the pointer on the screen will have to move. If this does not happen and the laptop does not see the wireless mouse, you need to check the batteries.

    In some cases, to activate the manipulator, press the button labeled “On / Off”. In this case, the optical sensor must necessarily light up. If the mouse is non-standard (for example, a gaming mouse), then we will install additional drivers. They can be taken either on the CD that comes with the manipulator, or downloaded from the manufacturer’s official website. In the first case, we use a drive. In the second, you need an Internet connection, where, using search engines, we find the information you need and download it. Then you need to install the drivers, following the instructions of the installation wizard. At the end, be sure to restart the computer.

    Within the framework of this article, it was described step by step how to connect a wireless mouse to a laptop. The first step is to install the batteries. Next, we connect the transmitter. If necessary, we will install additional drivers. At the end it is recommended to reboot everything. As you can see, there is nothing complicated. So we take it and do it. Success!

    The computer or laptop does not see the mouse

    Sometimes a Windows 10, 8 or Windows 7 user may face the fact that his computer (or laptop) does not see the mouse. this can happen after system updates, hardware configuration changes, and sometimes even without any explicit previous actions.

    This tutorial details why the mouse doesn’t work on a Windows computer and what to do to fix it. Perhaps, during some of the steps described in the manual, you will find the manual How to control the mouse from the keyboard useful.

    The main reasons why the mouse does not work in Windows

    First, about the factors that most often turn out to be the reason that the mouse does not work in Windows 10: they are relatively easy to recognize and fix.

    The main reasons why a computer or laptop does not see a mouse are (further they will all be discussed in detail)

    • After updating the system (especially Windows 8 and Windows 10). problems with the operation of USB controller drivers, power management.
    • If this is a new mouse. problems with the mouse itself, the location of the receiver (for a wireless mouse), its connection, the connector on the computer or laptop.
    • If the mouse is not new. accidentally removed cable / receiver (check if you have not done it yet) dead battery, damaged connector or mouse cable (damaged internal contacts), connection via a USB hub or ports on the front of the computer.
    • If the motherboard was changed or repaired on the computer. disconnected USB connectors in the BIOS, malfunctioning connectors, lack of their connection to the motherboard (for USB connectors on the case).
    • If you have some kind of special, creepyly fancy mouse, in theory it may require special drivers from the manufacturer (although, as a rule, basic functions work without them).
    • If we are talking about a fully working Bluetooth mouse and a laptop, sometimes the reason is accidental pressing of the Fn keys on the keyboard, the inclusion of the “Airplane” mode (in the notification area) in Windows 10 and 8, which disables Wi-Fi and Bluetooth. Read more. Bluetooth does not work on a laptop.

    Perhaps already one of these options will help you figure out what is the cause of the problem and correct the situation. If not, try other methods.

    What to do if the mouse does not work or the computer does not see it

    And now what exactly to do if the mouse does not work in Windows (we will talk about wired and wireless mice, but not about Bluetooth devices. for the latter, make sure that the Bluetooth module is turned on, the battery is “intact” and, if necessary, try to pair again devices. remove the mouse and join it again).

    To begin with, there are very simple and quick ways to find out if the matter is in the mouse itself or in the system:

    • If you have doubts about the performance of the mouse itself (or its cable), try testing it on another computer or laptop (even if it worked yesterday). At the same time, an important point: the luminous mouse sensor does not indicate its performance and that everything is in order with the cable / connector. If your UEFI (BIOS) supports control, try going into the BIOS and check if the mouse works there. If yes, then everything is fine with her. problems at the system or driver level.
    • If the mouse is connected via a USB hub, to the front of the PC, or to a USB 3.0 connector (usually blue), try connecting it to the back of the computer, ideally to one of the first USB 2.0 ports (usually the top ones). Likewise on a laptop. if connected to USB 3.0, try connecting to USB 2.0.
    • If you connected an external hard drive, printer or something else via USB before the problem appeared, try disconnecting this device (physically) and then restarting your computer.
    • Take a look at the Windows Device Manager (you can start from the keyboard like this: press the WinR keys, type devmgmt.msc and press Enter, to navigate through devices, you can press Tab once, then use the up and down arrows, the right arrow to open the section). See if there is a mouse under “Mice and Other Pointing Devices” or “HID Devices” for any errors listed. Does the mouse disappear from Device Manager when it is physically disconnected from the computer? (some wireless keyboards can be detected as a keyboard and a mouse, just like a mouse can be detected as a touchpad. like I have two mice in the screenshot, one of which is actually a keyboard). If it does not disappear or is not visible at all, then the problem is probably in the connector (not working or disconnected) or the mouse cable.
    • Also, in the device manager, you can try to delete the mouse (with the Delete key), and then in the menu (to go to the menu, press Alt) select “Action”. “Update hardware configuration”, sometimes it works.
    • If a problem occurs with a wireless mouse, and its receiver is connected to the computer on the back panel, check if it starts working if you bring it closer (so that there is a clear line of sight) to the receiver: it often happens that the problem is poor reception signal (in this case, another sign. the mouse works, then it does not. skips clicks, movements).
    • Check if there are options to enable / disable USB connectors in the BIOS, especially if the motherboard was changed, the BIOS was reset, etc. on the topic (although it was written in the context of the keyboard). in the instructions The keyboard does not work when the computer boots (see the section on USB support in the BIOS).

    These are the basic methods that can help when it’s not Windows. However, it often happens that the reason is precisely in the wrong operation of the OS or drivers, it is often found after Windows 10 or 8 updates.

    In these cases, the following methods can help:

    • For Windows 10 and 8 (8.1), try disabling Fast Startup and then restarting (specifically restarting, not shutting down and turning on) the computer. this may help.
    • Follow the steps from the instructions Failure to request a device descriptor (code 43), even if you do not have such codes and unknown devices in the manager, errors with a code or messages “USB device not recognized”. they can still be effective.

    If none of the methods helped. describe the situation in detail, I will try to help. If, on the contrary, something else worked, not described in the article, I will be glad if you share in the comments.

    Connection instructions via adapter

    The vast majority of wireless computer mice connect to a laptop or computer via an adapter. The signal is transmitted via the Wi-Fi protocol from the device to the adapter, and then processed by the computer. The maximum operating range is usually 15 meters. Next, we will tell you in detail how to connect a wireless computer mouse to a laptop. The instructions given will be relevant for those who are interested in how to connect a wireless mouse to a personal computer.

    Rules for connecting a wireless mouse to a laptop

    When the mouse is not in use, to conserve battery power, it is recommended that you turn it off using the power-off button on the mouse unless it has an automatic shutdown.

    You can also configure the mouse to be disabled by using Windows controls.

    READ  How to Connect Bluetooth to Tablet

    Click “Start” and select “Control Panel” in the “System-Windows” directory.

    Click on the Mouse icon.

    Select the “Equipment” tab and click “Properties”.

    In “Mouse Properties” go to “Power Management” and select “Allow this device to be turned off to save energy” by clicking “OK”.

    Reference! When using a wireless mouse, it takes some time for it to be detected when the operating system starts up, so the mouse does not start immediately, this is normal.

    Bluetooth connection

    Next, we’ll show you how to connect a wireless mouse to a laptop via Bluetooth. To do this, your laptop or computer must have an appropriate module. Most laptops have these modules installed from the factory. To connect a wireless mouse to your computer, follow these steps:

    • Go to the Bluetooth section. In the application bar in the lower right corner, right-click on the corresponding icon.
    • Select “Add device”.
    • The system will search for all devices. Among those found, naturally, click on your wireless mouse and click “Next”.
    • In the connection type, select the last item labeled “Link without code”. Click “Next”.
    • Wait until the device is configured.

    In Windows 10, users can activate search through the main menu. Click on “Start”, select “Settings”. “Devices”. Move the Bluetooth enable slider to the active state, and in the found devices window select the required.

    How to connect an RF mouse

    The first thing to do before connecting the mouse is to test it for compatibility with the computer to which it will be connected.

    • Connectable to the 27 MHz USB Receiver supplied with the mouse;
    • connectable to the 2.4 GHz USB Bluetooth receiver supplied with the mouse, or to a Bluetooth module inside the laptop.

    You can browse the website, or read the information on the mouse packaging to ensure that it is compatible with the operating system to which it will be connected.

    Reference! Depending on the model of the RF mouse, the connection may be slightly different, but its basic principles are almost the same for all RF mice.

    To make the connection, insert the receiving device (USB receiver), usually supplied with the wireless mouse, into the USB connector of the PC. Windows will automatically search for and install the correct driver.

    Insert batteries of the correct type into the wireless mouse, observing the polarity. On most models, you can lift the top of the mouse or open the cover from the bottom to reveal the battery compartment.

    Important! Cordless mice are usually powered by AA batteries. If the batteries are not included in the kit that came with the mouse, you will need to install new purchased batteries. If batteries are installed in the battery, they may need to be charged.

    Turn on the mouse. This usually requires pressing a button or moving a switch on the underside of the mouse. In the photo, the button is located on the upper side of the platform.

    Reference! If you are unable to find the power button, or if you are unable to find the power button, you can refer to the manual that came with the mouse for any information you need.

    If possible, set the required channel with the button. Channel selection is required to connect the mouse to multiple indoor PCs.

    Connect the mouse to the receiving device. To do this, hold down and hold the device pairing button on the mouse. If necessary, also simultaneously press and hold the button on the USB receiver. Continue to hold down the buttons until the illumination on the bottom of the mouse lights up or the indicator on the top of the mouse changes its character.

    Reference! Usually, after pairing, the mouse indicator will change from blinking to solid light. Some wireless mice are plug-and-play and do not need to follow these keystrokes.

    Turn the mouse over, place it on a level surface and start moving it, checking that it is connected correctly and that the cursor is moving. In case of normal cursor movement, the device is connected.

    Important! Do not use the optical mouse in a rough, wet, dusty area as this may reduce the tracking accuracy.

    Possible problems and how to fix them

    Wireless equipment may fail to connect for a variety of reasons, from incorrectly installed drivers to marriage. We recommend following these setup steps:

    • turn the mouse on and off several times and then check again;
    • check if the battery is charged;
    • check the functionality of the USB port into which the adapter is installed (try connecting another device to it).
    • make sure the bluetooth module is working properly (connect a phone or tablet to the laptop);
    • install the driver (be sure to restart your computer after that);
    • make sure that the operation of the wireless adapter or Bluetooth module is not blocked by administrator rights or other software (antivirus).

    Some hardware problems can be solved using specialized software, for example, MS Fix IT or Connection Tools. After starting, the program prompts the user to check the system for the absence or presence of faults. The software will scan. If any problems are found, a window will appear asking you to fix them. Before a positive answer, carefully read what exactly the program will fix.

    I have been using exclusively wireless mice for quite some time now. They are very convenient to use both with a laptop and with a stationary computer. I have probably changed about five. True, I had to spend money on batteries, but I took the last model with the ability to charge and I’m very pleased. Today the article is not about my gadgets, but about how to connect a wireless mouse to a PC or laptop on Windows. The connection process itself is not very complicated, but since people ask, it means that it is not always possible to connect. I will try to make a universal instruction that is suitable for different mice (Logitech, Rapoo, Trust, Microsoft, Maxxter, Defender, HP, A4Tech, Razer, Speedlink, etc.). with a different connection interface. Wireless, of course.

    Today, the market is mainly represented by wireless mice with the following wireless interfaces:

    • The radio interface (Wireless) are those mice that are connected via a special USB adapter (receiver). It comes with a mouse. The connection itself most often operates at a frequency of 2.4 GHz and often suffers from interference (from the same Wi-Fi routers). The connection is very simple: plug the receiver into the USB port of your computer / laptop, turn on the mouse and everything works. This is the most popular interface for connecting wireless keypads.
    • Bluetooth mice with this interest in connectivity are much smaller compared to conventional radio interfaces (which have a receiver). These are mostly more expensive models. They are very convenient to use with laptops, as they have a built-in Bluetooth module. And such a mouse connects without a receiver. But for a PC you will have to buy a USB Bluetooth adapter.
    • Wireless Bluetooth is when the mouse supports two connection options. Via a regular USB radio adapter and via Bluetooth (no adapter on laptops). To choose.

    I think you know which connection interface your wireless mouse supports. If not, see the instructions and information on the official website.

    We will separately consider the process of connecting via a radio interface (USB adapter) and separately via Bluetooth using a laptop with Windows 10 as an example. There are differences. I have to enter when connected via bluetooth.

    How to troubleshoot?

    If the mouse cursor does not move after plugging it in, you can try unplugging and plugging the mouse back on. You can also try to change the USB port on the laptop into which the receiver (dongle) is inserted.

    If this does not help, you need to refer to the “Malfunctions” section of the manual supplied with the mouse to solve the arising problems.

    If the mouse connects directly to the laptop, you can also try reinstalling the Bluetooth driver on it.

    On a note! The correct connection of the RF mouse can also be interfered with by installed antivirus software, which can be disabled while it is running.

    Auto Disconnect Touchpad After Connecting Wireless Mouse

    On laptops, you can configure everything in such a way that after connecting a mouse (wireless or wired), the touchpad will turn off automatically. And this is very convenient, because it only interferes. For example, when typing.

    As far as I understand, this can only be done when your laptop has a touchpad driver from the laptop manufacturer’s website. Checked on Lenovo, everything works.

    Open Start (or search) and write “mouse”. Open “Mouse Options”.

    Go to “Additional mouse options”.

    The new window should have a tab “ELAN” (you may have a different one). You need to go to it and put a tick next to the “Disconnect when connecting an external USB mouse” item. Click “Apply”.

    All is ready! Now the touchpad will not work when the mouse is connected.

    If you failed to connect the mouse, if you have any questions, or if you want to share useful information of the article. leave your messages in the comments.

    Although laptops allow touchpad navigation, many users prefer to use an optical mouse for this.

    Connecting a wired optical mouse is usually straightforward for users, but connecting a wireless mouse makes it a little more difficult.