Wi-Fi Not Working On Windows 10 Laptop

Table of Contents

1 solution to the problem in a laptop if Wi-Fi does not work. check the network status

Note: in the entire post I will put pictures from Windows 10. if you have another XP, windows 7, windows 8.1 or windows 8, then the solutions are SIMilar, only the settings themselves are slightly different.

First you need to check the problems of Wi-Fi networks at home, find out what state they are in, whether you are connected to it or the network is inactive, just click the network icon on the taskbar (in the tray).

If the icon looks like the following screenshot (airplane icon), it means that airplane mode is currently on and all connections are inactive.

In order to restore work, you just need to turn off the airplane mode by clicking on the airplane mode icon in the menu extension.

Sometimes trying to turn off Airplane Mode fails, which may mean that you need to update your Wi-Fi card system or drivers to the latest version available. All necessary updates are usually available through Windows Update.

10 proven solutions to fix Wi-Fi not working on Windows laptop

Do you have problems with Wi-Fi internet. is it not working? Your laptop samsung, asus, lenovo, hp pavilion, acer, MSI, dell inspiron, toshiba satellite, packard bell, sony, dns, dexp does not see the wireless network or you have problems connecting to the selected network?

In this guide, I will introduce methods for diagnosing Wi-Fi and the Most Popular Solutions for Wireless Connectivity Problems.

Most of the Wi-Fi problems reported by users occur after a certain period of using the operating system, and some errors only appear after updating the software / drivers or from windows 7, windows 8.1, windows 8 to Windows 10.

The methods presented below are the main corrective methods. I encountered the problem of connecting Wi-Fi on a laptop in models hp pavilion g6, lenovo b570e, lenovo z570, lenovo s10, lenovo b590, lenovo g50, Lenovo G580, lenovo b560, lenovo v560, lenovo g570, dell inspiron n5110, dell inspiron 1546 asus x51h, asus rt n12, lenovo v580c, hp 250 g4, asus x205ta, Samsung g530, asus n61vn, asus rt g32, hp 250 g3, asus ze551ml, acer nitro 5, lenovo b575, acer aspire 5020, lenovo a5500 h, lenovo e43, acer w511, asus a4000, hp 655, hp 15 ac000ur, emachines g 250 and only in one laptop Failed to fix.

Most laptops and netbooks come with a pre-installed Windows 10 operating system and additional software, all the necessary drivers for the network card must be installed “out of the box”, so if you have problems with the wireless network immediately after starting a new laptop, it is worth conducting basic network diagnostics Wi-Fi.

However, a Wi-Fi router can also make a problem, of which there are many tp link routers today, Rostelecom, Beeline, d link, megaphone, Kinetic router, Tattelecom router, iota router, zyxel router.

NOTE: I already have a guide here on the site (you can find it through the search) in what reasons affect the fact that the Internet via Wi-Fi works poorly, i.e., it is slow and unstable, so I will not touch on this now. the main reason that has become to work poorly or intermittently at times are problems in the supplier.

4 solving the problem in a laptop if Wi-Fi does not work on battery

Some users only reported problems when the laptop was running on battery power. In this situation, it is worth checking the settings of the network card and making some changes to the electricity settings.

Launch the device manager (WIN R = devmgmt.Msc), then Expand the list of network adapters, find the Wi-Fi card in the list, right-click on the device and select “Properties”.

Then go to the Power Management tab and Uncheck the box next to Allow the computer to turn off this device to save power.

If after this operation, Wi-Fi came back to life and networks became visible, the problem may be in the drivers, especially if it is after reinstalling, installing or updating Windows.

By default, the power management functions of the wireless card should work without problems, only sometimes errors occur after updating the drivers.

Unfortunately, the new driver is not always better, as I wrote earlier. Battery problems can also occur if alternative (modified) driver versions are installed.

If the above modification did NOT solve the problem, then you should also check the settings of the current power plan.

Press the WIN R key combination and type powercfg.Cpl in the start window. let’s call it Power Options applet.

Next to your current power plan, you will find the option “Change plan settings” on the next screen select “Change advanced power settings.

Additionally, in the list of available options, find the settings for the wireless network card, expand the list and go to the power saving module, then for battery power select the option “Maximum performance”.

Please be aware that changing the above settings will shorten battery life.

If possible, use the above solution only temporarily until you find the real cause of the problems that may be in the drivers.

It is also worth looking at the Windows event logs to quickly track down the culprit.

It is worth noting that the above method can also fix the error of recognizing the Wi-Fi network and the lack of Internet after the laptop wakes up from sleep mode.

9 solution to the problem if a Wi-Fi connection glass or an incorrect password appears in the laptop

You are 100% sure that you are entering the correct Wi-Fi password, but the laptop does not want to connect to the network?

Previously stored network data can be a problem. Windows 10 offers the ability to “forget” the selected network.

To do this, go to “Windows 10 or Windows 7 Settings”, select “Network and Internet” from the menu, go to the Wi-Fi section and select “Manage Known Networks”.

In the list, find and Click the name of the network you tried unsuccessfully to connect to, then select Forget.

Go back to the available connections applet, select a network from the list and click Connect, then enter the network security key (password).

Can I use alternative software to connect to my wireless network? YES!

You can use the software provided by the manufacturer of the Wi-Fi card, for example Intel offered the PROSet / Wireless Wi-Fi connection utility.

You can also use external Wi-Fi managers like NetSetMan, WeFi, CobraTek Wi-Fi Manager.

6 solving a problem in a laptop if a Wi-Fi network is in the list of available

This situation can occur if the network has been configured to prevent SSID /

For security reasons, it is recommended to disable SSID broadcasting, which will make it difficult to penetrate the network, but also cause difficulties when connecting Some devices (especially older ones).

It is also worth adding that the security enhancement is purely illusory, as this identifier can be easily obtained with the help of the appropriate software.

If SSID broadcast is disabled, “Hidden Network” appears in the list of available networks. To connect to a hidden network, you must know its SSID and password.

The connection procedure is very SIMilar, in the list of available Wi-Fi networks, click on the hidden network and Connect to it, you will be prompted to enter the ID and password.

Depending on the router software, the option can take various forms, such as “Enable / Disable SSID Broadcast”.

Some mobile phones have problems connecting to Wi-Fi if you have disabled SSID broadcasting and you can also fix this problem by following step 6.

3 solving a problem in a laptop if Wi-Fi does not work. Windows network diagnostic tool

If the previous points did NOT solve the problem with the Wi-Fi network, then in order to make Wi-Fi work, it is worth conducting an advanced analysis using a special tool.

Windows 10 has a handy little error analysis application that can be found in the Windows Network Troubleshooter.

In order to use the tool, you must go to the system settings, after entering the menu, enter the settings, and then click the best result in the list.

You can also Access Windows 10 settings through the notification bar (first icon in the panel on the right, All Settings). Then select Network Internet.

READ  What To Do If You Forgot Your Laptop Password

On the left side of the window, click on “Status” and then scroll through the settings screen until you find “Network troubleshooting”.

After calling the tool, the system will automatically analyze the situation and fix problems or offer hints (available solutions).

In special cases, you may need to reset the connection. Use this function as a last resort when no other method works.

Reset can be done through the settings applet. in the list of available options we are looking for “Network Reset”.

The option will restore the default settings, delete all installed network interfaces, which will require their reinstallation and configuration.

Wi-Fi Not Working On Windows 10 Laptop

If you do not remember the passwords for the network, you can extract it from the Windows registry. manually or using special software.

8 solution to the problem if the laptop does not see your Wi-Fi network while others see

In the era of 5GHz routers, the problem is most often caused by setting the network to a NOT supported band.

Most often the problem concerns old laptops and new routers, which support 2.4 and 5 GHz bands.

If a user configures a network operating at 5 GHz and his card is in a laptop Plasma is a newer standard, then the 5 GHz network is invisible in the available list.

5 solving a problem in a laptop if Wi-Fi does not work

If you see a red icon on the network connection in the panel, it is worth checking the status of the wireless card.

Run WIN R = in the Run window, enter ncpa.Cpl and check the Wi-Fi connection status. If you see the status as in the screenshot below. your Wi-Fi card is enabled.

If different, then Right-click the Wi-Fi connection and select “Enable” from the context menu.

After turning on the card, you will be connected to an available Wi-Fi network (if you have configured an automatic connection).

7 solving a problem in a laptop if you cannot connect to a Wi-Fi network

Here the router’s configured network is displayed in the list of available networks, but you still cannot connect to it from your device?

First of all, check the technical parameters of your wireless card in the laptop, the received data should be compared with the network parameters configured in the router.

Most often, the problem arises due to the choice of a NOT supported encryption method, then it is worth testing other alternatives (TKIP, AES, TKIP / AES) that are fully compatible with your Wi-Fi card.

Connection problems also occur when automatic mode is selected.

By changing the encryption, also fix the problem with Wi-Fi authentication in the phone, because many problems arise from incompatible encryption.

Restarts the wireless adapter

Without leaving the adapter settings, call the context menu by clicking on the wireless network and select “Disable”.

Well, then again, calling the same menu, click on “Enable”, than start the work of “BS” back.

Having done these manipulations, a yellow star should appear on the WI-Fi icon, indicating that Wi-Fi is not connected, but there are networks in the list that are available for connection. If you have already been connected to the network before, then most likely the connection will SIMply be restored and a normal, clean signal level icon will appear, without any signs in the absence of a network, etc.

Enabling the laptop Wi-Fi adapter

Of course, first we check whether the wireless signal module itself is physically turned on or not, it is possible that Wi-Fi does not work on the laptop precisely because of it. Although it is almost always turned on by default, it is still worth checking, since you could have turned it off on purpose or done it by accident, or maybe some virus or an incomprehensible program that saves battery power on a laptop tried instead of you.

Usually on all laptop computers, Wi-Fi is displayed in the form of an antenna, and is located mainly in the area of ​​the “F1. F12” key family. Just below in the screenshot in which I show an example, it is at “F3”. But here there is one moment, to turn on the adapter, just press F3 Not enough, to use minor commands (which is the activation button of the WI-Fi module), you should press one more auxiliary key on which “Fn” is written.

That is, to turn on Wi-Fi, they hold down the “Fn” key and then the “F3” button (Example), on which I had the network icon displayed (Your key may differ, pay attention to this).

Reboot the network and laptop

Another problem due to which it is impossible to connect to WI-Fi from a laptop is network sticking. Yes, yes, very often I met this even on my home network. It seems that everything is there, all devices are connected, but not your laptop.

In such a problem, I am often helped by restarting the router by disconnecting the power supply cable and then restarting the computer. And only after all this, the laptop starts to normally pick up the signal from the Wi-Fi router.

But the most interesting thing is that after rebooting only a laptop or a box with Wi-Fi, nothing happens to the Internet, you need to do this with both, in turn, first the router, then the laptop. Be sure to try it, maybe like me, this method will help you.

Check if the WI-Fi adapter driver has failed

In general, the reasons for the loss may be different, so let me show you how to check if all network drivers are installed or not. In principle, everything is as easy as shelling pears, go to the “Network and Sharing Center”, which you can find in the “Control Panel”, and there we click on “Change adapter settings”.

A list of adapters that are installed on the laptop should open, if you do not find there such as “Wireless network connection”, then you do not have a driver and the prerequisite for NOT working WI-Fi on the laptop is that one, so for full work you will have to reinstall the driver on the Wi-Fi adapter.

Otherwise, if there is such a connection, as shown in my below, then the driver is installed, and everything should work fine, without any problems.

WI-Fi does not work on the laptop. Error: Windows could not connect to this network

Wi-Fi is a technology with which a very large part of apartments, cafes, restaurants, vehicles and many other social places are equipped today. And strangely enough, now every second person uses this technology using smartphones, tablets and laptops. I remember earlier, I just had a SIMple PC with a huge monitor and the Internet connected via a telephone line, then I didn’t even think that soon such a thing as Wi-Fi would appear, and that all other digital technologies, will also develop at incredible speed.

I think you have already guessed that now I will talk about Wi-Fi again. If you delve more into the specifics, we will talk about why Wi-Fi may NOT work on a laptop, as well as how to properly connect a laptop to Wi-Fi and what to do when the error “Windows could not connect to the network” appears.

Why did I choose this particular theme? In fact, everything is logical, look, those who have Wi-Fi at home, as a rule, use it with a laptop, and such users are now the predominant number. And it so happened that when trying to connect to WI-Fi through a laptop, not everything goes so smoothly, various errors begin to appear or does NOT find the network at all. That is why, I decided to describe the situation why it may NOT work on a laptop Wi-Fi and the reasons for the appearance of such an error as “Windows could not connect to the network”.

So right now, we will together analyze every reason that could cause problems when connecting a laptop to everyone’s favorite Internet via Wi-Fi. And we’ll try to find a solution to the most popular problems due to which Wi-Fi may NOT work on a laptop or an error like “Windows could not connect to the network”.

I want to note right away that it is not always a prerequisite for the absence of a Wi-Fi connection. A laptop or computer is connected via a Wi-FI adapter. Sometimes, the router itself may act as a prerequisite due to incorrect settings during its installation, or there may be no direct signal from the provider, and we will foolishly sin on the laptop.

Therefore, yes, YOU WOULD NOT waste invaluable time, we will start with diagnosing and determining what is the immediate prerequisite for the absence of Wi-Fi when connected to it using a laptop. I will give all the examples on Windows 10, but since all new systems are very SIMilar to each other, you can easily find the item or parameter you need and the rest of the OS.

Diagnostics of the cause of the loss of Wi-Fi signal

In any diagnosis, it is never necessary to make hasty conclusions, I realized this from my own experience and having checked everything on my own skin. Sometimes, the cause of a malfunction or the appearance of an error may lie in some trifle or in setting to which you would never even think, as a result, you spent a huge amount of time looking for the wrong reason. The same applies to the Internet, before you take out a Wi-Fi router or laptop and make any changes to their settings, you should find out exactly who is to blame for the router or laptop. And now we change the settings so that then we will have to reset them back to the factory state and configure the router again.

The very first option would be to check the Internet using a direct cable connection from the provider to your computer or laptop. If the network connection icon lights up as usual without any warning signs, then everything is OK from the provider.

Next, after connecting the cable back to the router, we try to Access the Wi-Fi using some other device, such as a smartphone, tablet or game console. If, after connecting, the Internet icon is displayed normally and various pages open in the browser, then everything is fine with the Wi-Fi configuration.

READ  How To Turn On The Touch Mouse On A Laptop

Having done such NOT complicated manipulations at all, you can determine that the reasons, and not the working Wi-Fi signal, are located directly in the laptop itself

Note: If the Internet is absent on absolutely all devices, then the problem is clearly in the router itself or in its settings.

“Windows could not connect to this network

And finally, let’s talk about the error, “Windows could not connect to this network.” This error is one of those that is very common when working with Wi-Fi and is one of the most annoying, because the reasons for its appearance are NOT clear and its solution every time may not be at all commonplace.

After what does it appear? Clicked on the WI-FI connection icon, a list of available networks will appear, where after choosing the position you need you click on the “Connect” button.

Everything seems to be fine, you were prompted for a password, which you set when setting up the router. Clicked “OK”, the connection should start.

But in a friend, instead of connecting, a window appears with the words that “Windows could not connect to this network.” I am sure that when this problem appeared, you tried to connect to Wi-Fi again, but this attempt was also unsuccessful.

Usually, the prerequisite for such an error is the Wi-Fi router settings themselves, for example, an incorrectly set security type, where there is one on the router, and you are trying to connect using the second. Be careful when choosing encryption, I think if you yourself configured the router, you know what you installed, the rest most likely have the type “wpa2-psk”, which is used today in almost every WI-Fi network. Check if it was security that caused the error “Windows could not connect to this network”.

Sometimes, again, I repeat, sometimes, restarting the Wi-Fi router and device helps, I mentioned this just above. But this is NOT a boilerplate solution that will definitely help. If you have already encountered such an error, SIMply Reset the router to factory settings and then, using our instructions, re-configure it.

After such a radical step, the error “Windows could not connect to this network” should no longer bother you.

I’ll end here. It seems that I remembered everything that helped me in solving problems such as Wi-Fi does not work on a laptop and the error “Windows could not connect to this network.” Perhaps you managed to overcome these malfunctions in some way. Then DO NOT be greedy. leave it in the comments and I will 100% add it to the article, as an addition, so that everyone can find something that suits him or helps.

How it works

“How it works?”. A documentary television series that premiered on January 6, 2001 on Science Channel in the United States and on Discovery Channel Canada in Canada. The program is released in the Canadian province of Quebec. Show in broadcast.

Windows 10 can’t connect to Wi-Fi.

Wi-Fi is not working correctly on Windows 10 laptop. If you need to share Wi-Fi from Windows 10, then read the article The hotspot is installed, but the Internet does not work, then the reasons.

Windows services

Windows service. An application that is automatically executed by the system when the Windows operating system starts and runs regardless of the user’s status. Shares with the concept of Unix daemons. In most cases, services prohibit.

  • Codename Robson. Optional flash-based cache for Windows Vista. NAND Wi. Fi. Intel Wireless Wi-Fi Link 4965AGN a b g draft. N code
  • For the operation of radio-electronic equipment from the SE UGTsR. In addition, for the provision of telecommunications services using Wi-Fi, it is necessary
  • Asus EEE. This is a budget quad-core laptop OS. Windows 8.1 CPU. Intel Atom RAM. 2 GB display. 11 6 Not touch. The colors of the EeeBook X205 at the moment
  • Devices from Microsoft, originally running on Windows 10 In 2016, the Microsoft Surface Studio monoblock was released, and the laptop. The Microsoft Surface Book was
  • In December 2009, the first data on a new laptop appeared, which Sony began to advertise on the official Japanese website as revolutionary. AT
  • The interfaces were provided by Wi-Fi Rj45. The following operating systems were used: Android 1.6, Linux 2.6 XBurst, Windows CE 6.0. From the features you can
  • ITunes on Mac or PC requires: Mac: Mac OS X 10 5.8 or later PC: Windows 8, Windows 7, Windows Vista or Windows XP Home or
  • Mirror and protect data stored on your desktop computer, Windows Mac OS laptop or iPhone. The device supports the Time program
  • E529. P462g25mikk Lenovo IdeaPad S100 Samsung N100S Atom N2100 2320 Wi-Fi MeeGo 10 January Information from the Official MeeGo page: Governance Licensing Policy eng
  • Of course, these applications will work Not only on Google Chrome OS, but also in any standard OS browsers: Windows Mac and Linux, providing developers
  • Retrieved April 8, 2010 Archived April 10, 2010. Trouble In Paradise: iPad Users Complain Of Wi-Fi Issues Techies Fume Over iPad s Hidden Weakness
  • Pearlman played microconsoles and McGarvey. On a weak IBM PC. Compatible laptop Then OnLive was demonstrated on Apple Macintosh laptop
  • Computers and laptops are primarily central processors and chipsets based on them, as well as entire motherboards, modems and Wi-Fi. Modules. it
  • Connections including Wi-Fi and WiGig. Specification 1.0 regulated two types of connectors: A. On the controller or USB hub side and B. On the peripheral side
  • X86. Machines running Linux, macOS 10 4.8 or higher Windows XP, Windows Vista and Windows 7. Development requires JDK 5 or higher
  • Program code, which makes the creation of such a system more difficult than writing Microsoft Windows in terms of the amount of work of programmers. Such a huge amount of code is associated with the need
  • Messenger and other p2p. Clients, USB peripherals, LPT, COM, Wi-Fi Bluetooth and other local and network printers. DLP technologies at IPC

Rivendell

Rivendell. In J.R.R.Tolkien’s Legendarium, Elrond’s hidden hideout, created by him in Eriador in A.E. 1697, to defend against Sauron. The site was located in a deep valley at the western foothills of the Misty Mountains and remained hidden due to the ring.

Wi-Fi not working on windows 10 laptop

Pino. An online logic game based on tactics and strategy. This is a remix of chess, checkers and corners. The game develops imagination, concentration of attention, teaches you to solve tasks, plan your actions and think logically. It doesn’t matter how many chips you have, the main thing is how they are placed!

Date of publication:

Hot-Wi-Fi

Hot-Wi-Fi. The company and the eponymous marketing platform based on Wi-Fi technologies for working with clients. The main function of the service. Analysis of big data in users in order to attract and retain customers for business. As of 2019.

Endosymbiont

Endosymbiont. A microorganism that lives inside a second organism and benefits it. Although the term “symBIOSis” in the English language literature is used in a broad sense. To denote mutualism, commensalism and parasitism. Endosymbionts custom.

Wi does not turn on. Fi adapter windows 7.

Wi-Fi on a laptop does not work Windows 10 or WiFayka.RU. Wi fi does not work correctly on OS Windows 10 on 8 the same, very low speed Question: Wi Fi does not work on the HP ProBook 4710s laptop. How to connect Wi-Fi on a laptop Windows 10. Wi-Fi does not work on a laptop red cross on the icon. If Wi-Fi does not work on a Windows 10 laptop, the first thing to check is.

There is Wi-Fi on a laptop with Windows 10: solution to the problem

The first step for any situation like this is to test your Wi-Fi adapter. Sometimes this component is SIMply missing from the computer. Or it happens that it turns off under certain circumstances. The cause of the problems is the drivers, if the user knows for sure that the device is there, but still nothing works.

Several options can be distinguished:

  • Outdated version.
  • The non-working file itself.
  • No driver installed at all. In this case, a SIMple update does not help.

Note! The network icon is usually located on the panel associated with the notification. To open the Center, which is responsible for managing networks and sharing, you need to name it with the right mouse button on this icon. A new window will open. One of the points he will have will be devoted to the parameters of the wireless adapter, which can be changed.

Sometimes it is enough just to be called an adapter to enable the corresponding function. If the reason is such. at the next stage everything should work.

When and after this stage the adapter is NOT visible. the reason lies in the missing driver, or the instability of the latter. This often happens when Wi-Fi on a laptop disappears, Windows 10 often prompts automatically what to do.

Check if the icon has been completely disabled?

On the taskbar, you can completely disable any icons. To check this fact, no particularly complex actions are also required:

  • Go to the “Start” menu to the section with settings.
  • Selecting the System tab. Notifications and actions. She must not disappear.

Important. Quick action icons from the control panel are usually displayed on the right side. Below is a link called Turning System Icons On and Off. We must choose this particular item. A new window will appear allowing the user to control the Individual icons.

Under such conditions, the user is interested in an element whose name contains the word “Network”. The main thing is that the switch next to it is turned on. After that, they return to the previous screen with settings. You must click on the link labeled “Select the icons displayed on the taskbar.” Find the Network in the list, check that it is turned on. Otherwise, it will happen that there is no Wi-Fi adapter in the device manager.

READ  Which Laptop Is Better For Study

What to do if Wi-Fi is missing on a laptop with Windows 10

An unhealthy wireless network is a common problem faced by many users. Especially after updating the software to the latest version. The wireless adapter driver is most likely to cause this type of problem, but there are other reasons as well. You need to figure out in advance what to do if the Wi-Fi icon on a Windows 10 laptop disappears.

Make sure the network card is turned on

Disconnecting a network card often causes the icon for the corresponding function to stop displaying correctly. Instead, a symbol for cable or local networks appears, with a completely different appearance. Classic image with three divisions for Wi-Fi networks Will not.

The order of solving the problem is usually described as follows:

  • Go to the Start menu. This is usually easy.
  • Search for “Control Panel”, launch this part of the system.
  • Further, the transition is carried out in such sections. “Network and Internet”, “Network and Sharing Center”, “Changing the settings of the network card”. The last item is most often displayed on the left side. Disabling it is easy too.
  • After that, the user will see a list of all network cards currently running on the computer.
  • You need to make sure that the state of the card is turned on. When no Wi-Fi networks are found, Windows 10 is recommended to restart.

Important. If the color of the icon remains gray, you just need to click on it to select the option with the enabled state.

In the case of laptops, an additional check is carried out to determine the position of the switch responsible for the Wi-Fi function. Otherwise, problems with starting network cards inevitably arise.

Problems with the Wi-Fi adapter driver in Windows 10

Solving the problem under such circumstances involves going through the following steps:

  • First, users open the Task Manager. This is necessary to make sure that there is no or a wireless adapter.
  • It is necessary to go to the “Start” menu, then. to more detailed parameters.
  • From characteristics go to the section dedicated to devices.
  • At the bottom, select the item on “Device Manager”.

Of interest is the tab describing Network adapters.

In total, two adapters should appear in front of the user:

  • LAN. To connect the Internet to a computer via a network card.
  • Wi-Fi. To use wireless technologies.

The second adapter is usually complemented by the Wireless designation. If Wi Fi Windows 10 is missing. this item is checked.

Important! The name indicates the manufacturer, the exact model. Sometimes it happens that there is an adapter, it is turned on. But the wireless network itself still doesn’t work. Perhaps the reason is again related to the drivers.

Under such conditions, it is necessary to write down or copy the official, full name of the model somewhere. After that, they look for the manufacturer’s official website on the Internet. After that download and install the required driver version. Then they try to connect again.

Note! In the device manager, the adapter is NOT displayed if the device is basically absent, or there is a driver for it.

“Unrecognized or unknown device”. Possible name for the adapter if it is inside the laptop itself. Then the problem is most likely also caused by the drivers. The wireless adapter will most likely be listed as soon as the latest version of the corresponding hardware is installed. If the Wi-Fi adapter disappeared from the device manager, the problem can be solved by following the same recommendations as indicated earlier.

How to install or update the Wi-Fi adapter driver?

Actions are also performed in a certain order.

  • Search for the official manufacturer’s page on the Internet.
  • They search for a specific model by themselves Entering the name. Or using the menu on the site itself. Some options may fade over time.
  • Then click on the name, go to the section, through which downloads are carried out.
  • Usually, there are practically no problems with finding a driver for a wireless device. Signature will help you find out the right version.
  • The main thing is to indicate which version of the operating system this or that person is using. Everyone can find an option for Windows 10. Then it won’t be difficult to fix the problem.

After downloading, you will need to open the saved file, follow the instructions that appear next. A file with the EXE extension is required to run. It is best to restart the system when the installation process is complete. Then you can try to establish a wireless connection again, when the corresponding icons, the button will be displayed.

In stationary computers, the procedure remains approximately the same. The key is to select the correct driver version for the adapter and operating system. This is a great solution if Wi-Fi is missing on Windows 10 laptops.

Check if the Wi-Fi icon has been hidden

Note! It often happens that this element SIMply remains invisible to the most users. Windows 10’s notification area lets you move any icons from place to place. This applies to audio signals and network related items. Users could drag the icon to a different location by themselves, which made it invisible.

To expand the list with all the icons in the notification area, just click on the arrow icon below. After that, the Wi-Fi icon may appear in the tray among the second SIMilar images. It must be taken and held with the left mouse button. Then they drag it to the usual place. in the same place where the clock is. Then you can definitely be sure that the Wi-Fi icons on the Win 10 laptop are not missing.

Check if the icon has been blocked by the Local Group Policy Editor (Windows 10 Pro and Enterprise only)

This may cause the icons to be completely blocked. To do this, use the local group policy editor.

The task is solved without serious problems even by beginner users:

  • Application of Win R combination.
  • Entering the gpedit.Msc command.
  • Confirm selection with the Enter key.
  • After that, a window opens allowing you to edit the corresponding policy.
  • The folders on the left unfold by following the following path: User Configuration. Administrative Templates. Start Menu and Taskbar. It will NOT be difficult to connect to the network later.

On the right side of the search, you need to find the item “Remove network icon”. It is clicked twice to see the available information. In the new window, the function is disabled. After that, use the OK button. This should fix the problem if Windows 10 Wi-Fi goes missing.

The above recommendations should be sufficient to solve problems related to wireless networks using Wi-Fi technology.

Note! The most common reason is the lack of the required driver version; the network adapters themselves rarely fail. All the more so if they were bought recently. Therefore, it is best to take care in advance of finding a suitable solution, which even a novice user can handle.

How to determine why Wi-Fi is not working on a laptop with windows 10

Windows 10 has a great tool to help you quickly find Wi-Fi problems and, in most cases, fix.

To do this, go to the same network control center and click on the line at the bottom. troubleshooting.

Then you point the windows 10 system to the network adapter and by clicking in the window that appears all the time “next” we carry out the process of finding and troubleshooting.

NOTE: if you just installed windows 10 on your laptop and Wi-Fi does not work, then almost 100% that you need to install the driver.

Turn on Wi-Fi on a laptop in Windows 10

Sign in Network and Sharing Center windows 10 and click on the left on “Change adapter settings”

In the new window, see if there is a wireless adapter. If there is such a comment, then you definitely need to install the driver, which is the most reliable download from the laptop manufacturer’s website.

If there is an adapter, but it is displayed in gray, then it is SIMply disabled and needs to be activated.

What to do if Wi-Fi does not work on a windows 10 laptop

There are many reasons why Wi-Fi does not work on a laptop with windows 10 installed. They can be divided into “popular” and exclusively “individual”.

The first and main reason is that Wi-Fi is SIMply turned off. You could have done it not even by accident.

This option is easy to check. Wi-Fi used to work on your windows 10 laptop, now it doesn’t work. There are surprises here.

Most often, an accidental shutdown occurs when you press a certain key or combination, but depending on the model of hp, asus, lenovo, acer, samsung or toshiba it is different. Therefore, it is impossible to give you a universal recipe.

In addition to the keys, sometimes an additional button is provided, most often located somewhere separately on the case. Examine your laptop carefully from all sides.

That’s not all. Wi-Fi works through an adapter. It can also be disabled. You can include in device Manager team. to use.

Laptop Wi-Fi not working on windows 10. individual reasons

Rarely encountered reasons include:

That’s all that came to mind about this, although these are far from all the reasons, but the main point in this short entry is provided.

You have a point of departure. Go for it. Yes, I almost forgot if you still do not solve the problem, then describe it in the comments. we will find a solution together. Success.

10 comments

I still didn’t turn on Wi-Fi through a button on an HP laptop, we fixed the problem by going into the device manager where I went to the properties of the Wi-Fi adapter in the menu, additionally, they switched the Green Field value to mixed ok and it all worked.