Why iPhone Navigator doesn’t work

10 reasons why the power button on iPhone isn’t working

Thanks to the lock (power) button, your iPhone can fully function. turn on and go into standby mode, thus saving precious charging percentages. However, there are times when the iPhone’s power button starts to jam or breaks altogether. We have collected most of the most common causes of a broken power button on your iPhone, as well as helpful tips to fix this problem.

Why is the power button on iPhone faulty

There are many reasons that can cause the power button on the iPhone to stop working.

The most common reason that brings a lot of problems to every iPhone user is a simple software glitch. It is not that difficult to identify it, in rare cases it is harmless to your iPhone. However, it can scare any user if caught by surprise.

Fixing a software glitch is easy if it is a one-time occurrence and there are no problems with the iOS update. In this case, in order for the power button on the iPhone to work again, you just need to restart your smartphone.

The second most common reason your iPhone power button might not work is due to improper update or poor quality jailbreak. One way or another, not everyone knows how to properly update their devices.

Many users are very frivolous about installing updates: they do not download them to the end, interrupt the final reboot, download updates with a low percentage of charge due to poor internet. Each of the listed items can cause the installation of a “broken” update, which will bring a lot of minor and major troubles to your iPhone.

Only a master will be able to identify the wrong update and say for sure what exactly is the reason for the malfunctioning of the power button on your iPhone. But you can independently monitor the operation of your device: usually, an incorrect update does not bring any one problem, other failures should be noticed in the system that have not been observed before.

If you find them, try downloading a previous iOS backup via iCloud if you created it before. It definitely shouldn’t be worse from this procedure, and if you made the right diagnosis, the shutdown button will return to normal after the previous version of iOS is restored. Then you can try updating your iPhone again.

Sometimes the power button on the iPhone fails due to the fact that too much dirt has accumulated inside, which interferes with the operation of contacts. One way or another, we often do not notice with what hands we take our smartphone, where we leave it and quite rarely monitor the cleanliness of our iPhone.

If dirt gets into the small gaps around the button, you may notice some key jamming. But when pressed firmly, it will work. In this case, you can very carefully use a needle to clean the small connectors around the iPhone’s power button. It is very important not to overdo it, so as not to damage the contacts and not to dismantle the button.

If dirt has formed an obstacle inside the button and prevents the contacts from working properly, you are unlikely to be able to clean it yourself. You can try to drop a little alcohol on the button (one drop, no more), and then very gently press it, as if distributing the alcohol inside. However, keep in mind that doing so may cause additional harm if the power button cable components or any other part in your iPhone has been damaged.

Therefore, in order to avoid trouble, it is better to contact the service center master and ask him to diagnose your device.

If iPhone comes into contact with moisture, in most cases, it has unpleasant consequences. Yes, Apple is committed to protecting users and is providing improved water resistance for the new iPhone 11 and iPhone 11 Pro. However, the risk of breakage after moisture is still very high, so if you encounter moisture getting into your iPhone, be sure to contact the service center for a diagnosis by an experienced technician.

If, after contact with moisture, you notice the iPhone’s power button sticking, this may indicate damage to the loop or oxidation of the button contacts. It is very important to understand that the ingress of sugary liquids, soda, tea or coffee is doubly detrimental to iPhone components.

This problem can only be solved by fully restoring the iPhone after getting wet. This procedure can be carried out at the service center.

Dropping your iPhone is just as damaging to its components as contact with moisture. If the power button stopped working after a mechanical fall or a strong blow, it is quite possible that its loop was damaged or the contacts were broken.

Unfortunately, this problem cannot be fixed on your own. However, if you do not have time now to contact a service center or call a repairman at home, you can resort to a temporary solution to this problem. configure the AssistiveTouch hotkey to lock and turn on.

  • Open iPhone Settings
  • Go to the main settings menu
  • Open the accessibility settings tab
  • Then turn on the AssistiveTouch function
  • After that, the system will prompt you to create a special hot button on the screen, which can be responsible for locking or turning on / off your iPhone.

Attention! This is only a temporary solution to the problem. Please do not neglect this method and contact the master in time to avoid other damage.

Failure of the power button loop

Unfortunately, even Apple users are not immune to system crashes and hardware failure on the iPhone. Sometimes there are defects in components, admitted in production. The power button loop is no exception.

If it is possible to fix a software failure yourself, then a failure in the operation of the power button loop on the iPhone, which can be caused by many different factors, is almost impossible to fix yourself.

over, such a failure can only be diagnosed by the master, so do not postpone a visit to the service center.

Careless use can also break the iPhone’s power button. As well as mechanical damage, a strong pressing on the button itself can be fraught with damage to the contacts or internal sticking of the silicone “tubercle”. which is responsible for giving a signal to the system.

If, after a strong press, the power button of the iPhone ceases to function normally or responds to your touches intermittently, you should contact the service center.

If you find a marriage too late, you should contact the service center. Most likely, professionals will be able to quickly fix this nuisance by replacing the power button cable on your iPhone.

Damage to the power button loop

(IPhone 11 Pro Power Button Flex)

Damage to the button cable on the iPhone is a rather unpleasant breakdown that can manifest itself both instantly and gradually. Only a master can diagnose this breakdown and fix it.

The first urge to break the power button loop on the iPhone:

  • The power button works by itself
  • iPhone reboots / shuts down on its own
  • When you press the power button, nothing happens

Burnout / damage to contacts

The iPhone’s power button flex cable is connected using a small mechanism with contacts. If one of them is damaged due to improper assembly / repair, moisture ingress or falling, the power button may refuse to perform its functions.

Unfortunately, contacts are not restored. A full replacement of the iPhone power button cable with a new one is required.

A reasonable solution in case of failure of the lock button on the iPhone would be to contact a specialized iLab service center so that the technician could conduct unscheduled diagnostics and tell you the exact reasons for the breakdown. Nevertheless, many users ignore this breakdown, go to the Internet to look for reasons and life hacks to fix it.

Every component of the iPhone is an important and very fragile part that can fail if used improperly or carelessly. If you value your iPhone, you must take care of its safety: do not neglect the routine diagnostics of the device, contact the service center in time, take care of purchasing a protective glass and a case for the iPhone, avoid contact with moisture and fall / shock. This is the only way to achieve good and long-term performance of your favorite device.

Also, do not forget that not all problems with the device can be fixed on your own. Even if the breakdown touches such a small component as the power button, you need to sensibly approach the situation and provide the iPhone for repair to a professional.

Reset all geolocation and network data

If none of the above methods work, then the problem is related to geolocation and network information. In this case, it affects not only the GPS function, but also the cellular connection.

You can fix the problem by going to Settings → General → Reset and clicking on “Reset network settings” and “Reset geo settings”.

Each time you click on “Reset”, you need to enter a password, after which the information will be completely deleted. Next, you need to reconnect to the Wi-Fi network and set all the necessary settings for accessing the wireless network.

Reboot or restore your device in iTunes

In some situations, the only solution to the problem is to restart the iPhone. Even if the method described above did not work, all that can be done is to restore the device through iTunes.

The presented methods should help solve GPS problems. In case of failure, it is worth contacting the service center, perhaps in your case there is a hardware problem.

READ  iPhone 6 or 6 plus which is better

It can be argued that apart from the GPS camera, these are the most useful additional functions for a smartphone. It integrates with almost every other application on your phone, from maps, social networks, games, websites, photos, etc. We use GPS for a wide range of Spectra activities like find a friend, find a museum, try a new and nearby restaurant and the GPS function is indispensable when playing Pokémon GO and allows apps to track the user’s location.

So, you can imagine what kind of problem you will have if your iPhone GPS is not working. The functionality affected will be limited not only to the GPS application, but all other applications as well. Users may experience something from the apps if the apps don’t work at all.

If you are an iPhone owner and you have a GPS problem, it is hardware related, there is nothing you can do, you need to bring your iPhone to Apple Service Center for hardware replacement. Therefore, we will not discuss this type of problem here, we only discuss the software problem. Here are some of the problems and their ways. You can use them to fix the problem. GPS not working on iPhone XS / XR / X / 8/8 Plus / 7/7 Plus / 6s / 6 / 5s with iOS 12/11.

The compass is not pointing in the wrong direction; applications cannot determine the current location, etc.

Check your network settings, you need to turn off WI-FI and Cellular. Restarting the iPhone can also restore the GPS function to work properly, or you can restore your device via iTunes. After that, if GPS is not working on iPhone yet.

Reset network or geo settings

Go to Settings. General. Reset and clicking on “Reset network settings” and “Reset geo settings”.

It is worth with Honor that you need to enter a password to reset the settings, after the reset the information will be completely deleted.

iphone, navigator, doesn, work

No GPS signal

The signal strength depends on where you are. To activate the operability and determine the signal, you must leave the room in the signal availability area, for example, into an open space, so that the iPhone can receive a signal from the satellite.

Check if apps have been granted permission to use location services

Very often, users simply forget to activate the Geolocation function in applications. For example, you will not be able to see your location on Maps or other map services if the application has not been given permission to use the geolocation function.

In order to check if the applications have the appropriate permission, go to Settings. Privacy. Geolocation services.

You can prevent some applications from using geolocation services. You can also allow applications to receive location data always or only while they are running (including in the background).

Please note that some applications require permission to use permanent location services. If you select the option to only receive data when the program is open, the GPS function will not work correctly. Make sure the settings are correct for each application.

Why GPS on iPhone may not work?

The most common problems with GPS:

  • No GPS signal;
  • GPS does not update the current location;
  • GPS shows wrong location;
  • The compass is pointing in the wrong direction;
  • Apps cannot determine your current location.

Of course, the list goes on, depending on how and where you use your iPhone. In addition, applications that use the GPS function differently may cause problems. Sometimes the error message does not appear at all, which makes it much more difficult to find and eliminate the cause of the problem.

Setting parameters in the control room

Go to the control center and restart all wireless services. mobile network, Wi-Fi, Bluetooth. Check if Airplane mode is off.

To restore the original parameters of the navigator, reset the geolocation network settings on your IPhone:

GPS does not work on iPhone. How to fix the problem?

With the help of the built-in navigator, you can easily get to the desired place using your IPhone as a map. Often, users will even fix the phone to the car dashboard, creating a detailed visualization of the path.

Like any other component of the gadget, the GPS function can sometimes be unstable. If your iPhone is not working with navigator, you must first try to properly configure the operating system services. If the component does not work properly, replace the GPS module.

Reset all geolocation and network data

If none of the above methods work, then the problem is related to geolocation and network information. In this case, it affects not only the GPS function, but also the cellular connection.

You can fix the problem by going to Settings → General → Reset and clicking on “Reset network settings” and “Reset geo settings”.

Each time you click on “Reset”, you need to enter a password, after which the information will be completely deleted. Next, you need to reconnect to the Wi-Fi network and set all the necessary settings for accessing the wireless network.

Check if apps have been granted permission to use location services

Very often, users simply forget to activate the Geolocation function in applications. For example, you will not be able to see your location on Maps or other map services if the application has not been given permission to use the geolocation function.

To check if the apps have the appropriate permission, go to Settings → Privacy → Location Services.

You can prevent some applications from using geolocation services. You can also allow applications to receive location data when using the program, or set a setting in which the application will ask for access to geolocation each time it starts.

Make sure the correct settings are set for the required applications.

How to fix the most common GPS problems

Below are some solutions to the most common iPhone GPS issues.

Why GPS on iPhone suddenly stopped working?

The most common problems with GPS:

  • No GPS signal;
  • GPS does not update current location;
  • GPS shows wrong location;
  • The compass is pointing in the wrong direction;
  • Apps cannot determine the current location (sometimes it happens indoors).

Of course, the list goes on, depending on how and where you use your iPhone. In addition, applications that use the GPS function differently may cause problems. Sometimes the error message does not appear at all, which makes it much more difficult to find and eliminate the cause of the problem.

Turn location services off and on again

Sometimes the problem with the GPS function is just a slight glitch in the software. In this case, you need to disable and re-enable location services. To do this, go to Settings → Privacy → Location Services and move the switch to the left, and then to the right again.

You can also disable and enable all wireless services by deactivating and activating Airplane Mode in Control Center.

Check GPS signal

For the GPS function to work properly in applications, a good radio signal is required. GPS problems can occur if you are in a building, basement, or other location that does not allow radio signals to pass through. In this case, you need to leave the building or move somewhere else so that the device can receive a signal from the satellite.

GPS not working on iPhone, how to fix

The iPhone’s GPS functionality can hardly be overestimated. it makes it easier and easier to get to your destination using the software navigation, it is indispensable when playing Pokémon GO and allows applications to track the user’s location. However, like any other system, GPS can fail.

Please use Wi-Fi when downloading maps, as their size can be very large.

However, you still will not become completely free of the Internet with this program, so in a sense, the Yandex navigator really does not work without the Internet. You will have the maps on your phone, but you still need a network connection to get directions or search in the area. A way out of this situation can be called laying a route in advance, and then already being really free of the Internet, moving along this route. In any case, you will significantly reduce the amount of Internet traffic and increase the speed of the navigator.

Of course, in the absence of the Internet, Yandex Navigator will not be able to convey to you other information that may be useful. For example, about traffic jams. By the way, if you don’t see the situation with traffic jams, you need to click on the traffic light icon in the corner of the navigator (at the moment it is gray). After that, it will light up with one of the colors, depending on the strength of the traffic jams in your city. The degree of traffic congestion is displayed as a number from 0 to 10.

Why GPS on iPhone suddenly stopped working?

The most common problems with GPS:

  • No GPS signal;
  • GPS does not update current location;
  • GPS shows wrong location;
  • The compass is pointing in the wrong direction;
  • Apps cannot determine your current location.

Of course, the list goes on, depending on how and where you use your iPhone. In addition, applications that use the GPS function differently may cause problems. Sometimes the error message does not appear at all, which makes it much more difficult to find and eliminate the cause of the problem.

  • “Find friends”, or how to see the location of friends on iPhone and iPad.
  • Orientation with iPhone: How to Determine Bearing in Compass App.

Why Yandex Navigator does not open on iPhone

The iPhone‘s GPS functionality can hardly be overestimated. it makes it easier and easier to get to your destination using the software navigation, it is indispensable when playing Pokémon GO and allows applications to track the user’s location. However, like any other system, GPS can fail.

READ  IPhone 6 touch ID not working

What to do if Yandex navigator refused to work?

Failure of the navigator to work can confuse drivers and pedestrians in unfamiliar areas. Therefore, it is important to be able to act correctly in such a situation. To do this, you need to do the following:

  • make sure that the Internet is working on the iPhone and the signal quality is good;
  • update yandex navigator;
  • uninstall unnecessary apps.
iphone, navigator, doesn, work

The most reliable solution, if Yandex navigator does not work in IPhone 5, come to our Apple service for professional help.

Yandex Navigator is the main navigation development of Yandex, the leading Russian-language search engine. The application is absolutely free and can be downloaded to any smartphone running various operating systems, including iPhone (iOs 8) and Andro

So, for some reason, your Yandex navigator does not work.

Of course, the word “does not work” can mean dozens of situations. from the inability to turn on the application to some difficulties in geolocation in certain regions. Let’s try to cover all the points in more detail, including those related to poor knowledge of the phone device. If you are not a beginner, you can read diagonally 🙂

In this article, we will talk exclusively about solving problems that may arise when using Yandex Navigator. Read instructions and “life hacks” on its use in our other articles in the “Navigation” heading.

How to fix the most common GPS problems

Below are some solutions to the most common iPhone GPS issues.

For the GPS function to work properly in applications, a good radio signal is required. GPS problems can occur if you are in a building, basement, or other location that does not allow radio signals to pass through. In this case, you need to leave the building or move somewhere else so that the device can receive a signal from the satellite.

Check if apps have been granted permission to use location services

Very often, users simply forget to activate the Geolocation function in applications. For example, you will not be able to see your location on Maps or other map services if the application has not been given permission to use the geolocation function.

In order to check if the applications have the appropriate permission, go to Settings. Privacy. Geolocation services.

You can prevent some applications from using geolocation services. You can also allow applications to receive location data always or only while they are running (including in the background).

Please note that some applications require permission to use permanent location services. If you select the option to only receive data when the program is open, the GPS function will not work correctly. Make sure the settings are correct for each application.

Turn location services off and on again

Sometimes the problem with the GPS function is just a slight glitch in the software. In this case, you need to disable and re-enable location services. To do this, go to Settings. Privacy. Geolocation Services and move the switch to the left, and then right again.

You can also disable and enable all wireless services by deactivating and activating Airplane Mode in Control Center.

Reset all geolocation and network data

If none of the above methods work, then the problem is related to geolocation and network information. In this case, it affects not only the GPS function, but also the cellular connection.

You can fix the problem by going to Settings. General. Reset and clicking on “Reset network settings” and “Reset geo settings”.

Each time you click on “Reset”, you need to enter a password, after which the information will be completely deleted. Next, you need to reconnect to the Wi-Fi network and set all the necessary settings for accessing the wireless network.

Reboot or restore your device in iTunes

In some situations, the only solution to the problem is to restart the iPhone. Even if the method described above did not work, all that can be done is to restore the device via iTunes (instructions).

The presented methods should help solve GPS problems. In case of failure, it is worth contacting the service center, perhaps in your case there is a hardware problem.

The Apple Service Center is at any time ready to provide the necessary technical assistance if the Yandex navigator does not work in the IPhone 5 or works intermittently. Over the entire period of our activity, we have qualitatively restored many iPhones, which successfully continued to delight their owners. It is our authority to carry out such manipulations: replacing an unusable battery, replacing the screen, replacing the power connector, repairing the speaker and microphone, eliminating malfunctions in the operating system, resuming normal processor operation. All this and much more is repaired with high quality and inexpensive.

Today, the iPhone has easily replaced many different items and accessories for people. Its filling allows you to easily fulfill the wishes of the user. The screen of the device is 4 inches, transmits rich images with the correct contrast, is equipped with iOS 7, a progressive video processor, nano SIM, a high-quality 8 megapixel camera that takes realistic pictures, a GPS / GLONASS navigation system, a durable metal coating, Wi-Fi, Bluetooth 4.0, USB All of this iPhone hardware can run smoothly for years. But if the Yandex navigator does not work in the IPhone 5, then many categories of users will have a hard time.

Voice search does not work

Here, the problem may be either your phone’s microphone is broken or there is no internet connection. Also, a possible cause may be noisy surroundings. for example, on a busy street or with loud music. Make sure that the voice commands are heard in relative silence. In addition, Yandex Navigator, like any program, can sometimes get stubborn and not work for no reason. It will pass for him, so be patient, and if necessary, take the actions from the last paragraph.

The navigator does not follow the route

Again, the first thing you need to do is check if you have Geodata Transfer turned on. After that, check your Internet connection, including its speed (use the built-in browser on your phone, download a couple of sites). If both the GPS module and the Internet connection are active, but the Yandex navigator does not work well and does not follow the route, then you need to close the program and enter it again. It didn’t help. go to the settings and forcibly quit its work by clicking “Stop” (for Android; the algorithm is similar for iOs), then go back to the program. It didn’t help. restart your phone. It did not help. delete the navigation program and download it again (but, as a rule, it is not enough when it reaches this point, after all, Yandex Navigator is a fairly stable non-buggy program). But, let’s say, even this action did not help. Then you have to make a difficult decision and stop using this application on your current phone. Well, they could not make friends. You have a selection of good counterparts.

Yandex Navigator does not work from the very beginning

The program you have installed, but does not open, gives a variety of errors, “crashes” immediately after switching on. It is quite possible that it was initially incorrectly “installed” on your smartphone.

Today, almost 100% of smartphones can work with this application, so it is almost impossible that your phone is “weak”, there is not enough memory, etc. The only exception is if the navigator freezes or works with huge delays. In this case, we can really say that the smartphone “does not pull”. As a rule, this happens with devices with less than 512 MB of RAM (256 MB, for example). This is really small.

But back to the first case. You just need to reinstall the program on your phone. In the smartphone settings, delete the application, go back to the place where you downloaded it (for example, for smartphones on Android, this is the Google Market), and download and then install it again. If the problem was in an incorrect installation, then it will disappear.

You turn on the program, but it does not detect your location. Accordingly, it is impossible to create a route or perform any actions related to navigation. Make sure you have GPS turned on on your phone. After that, go to the window or go out into the street, and wait until your phone detects satellites, and according to them. your location.

Yandex Navigator is a program designed to be installed on smartphones. This means that it works with the A-GPS system. This means that your location can be determined not only by satellites, but also by cell towers. Those. in city conditions, you may actually not turn on the GPS module, but this causes certain inconveniences when working with the navigator interface (for example, there will be a huge green circle around your location on the map, which will interfere with reading the information), and the positioning accuracy will decrease slightly.

No GPS signal

The signal strength depends on where you are. To activate the operability and determine the signal, you must leave the room in the signal availability area, for example, into an open space, so that the iPhone can receive a signal from the satellite.

READ  iPhone thinks headphones are connected

GPS access rights

The use of location services may be prohibited for some applications. Most likely, during the installation process, you simply did not pay attention to the activation of this option. You can configure access rights in the IPhone settings:

  • Open the geolocation options;
  • Find an application in which GPS does not work;
  • Click on the object and change the mode of using the navigator from “Never” to “Always”. Reload the app.

Also, you can try turning geolocation off and on again. The problem may be caused by a temporary disruption to the satellite connection.

Turn location services off and on again

Sometimes the problem with the GPS function is just a slight glitch in the software. In this case, you need to disable and re-enable location services. To do this, go to Settings. Privacy. Geolocation Services and move the switch to the left, and then right again.

You can also disable and enable all wireless services by deactivating and activating Airplane Mode in Control Center.

Why GPS doesn‘t work on iPhone 6

Signal level check

Users often confuse a bad signal with problems with the built-in navigator. Some installed programs require a good satellite connection speed. The signal strength depends on where you are. Try to go outside to improve the performance of geolocation services. In homes, basements, elevators and concrete buildings, the connection quality is severely degraded.

Reboot or restore your device in iTunes

In some situations, the only solution to the problem is to restart the iPhone. Even if the method described above did not work, all that can be done is to restore the device through iTunes.

The presented methods should help solve GPS problems. In case of failure, it is worth contacting the service center, perhaps in your case there is a hardware problem.

It can be argued that apart from the GPS camera, these are the most useful additional functions for a smartphone. It integrates with almost every other application on your phone, from maps, social networks, games, websites, photos, etc. We use GPS for a wide range of Spectra activities like find a friend, find a museum, try a new and nearby restaurant and the GPS function is indispensable when playing Pokémon GO and allows apps to track the user’s location.

So, you can imagine what kind of problem you will have if your iPhone GPS is not working. The functionality affected will be limited not only to the GPS application, but all other applications as well. Users may experience something from the apps if the apps don’t work at all.

If you are an iPhone owner and you have a GPS problem, it is hardware related, there is nothing you can do, you need to bring your iPhone to Apple Service Center for hardware replacement. Therefore, we will not discuss this type of problem here, we only discuss the software problem. Here are some of the problems and their ways. You can use them to fix the problem. GPS not working on iPhone XS / XR / X / 8/8 Plus / 7/7 Plus / 6s / 6 / 5s with iOS 12/11.

Check if apps have been granted permission to use location services

Very often, users simply forget to activate the Geolocation function in applications. For example, you will not be able to see your location on Maps or other map services if the application has not been given permission to use the geolocation function.

In order to check if the applications have the appropriate permission, go to Settings. Privacy. Geolocation services.

You can prevent some applications from using geolocation services. You can also allow applications to receive location data always or only while they are running (including in the background).

Please note that some applications require permission to use permanent location services. If you select the option to only receive data when the program is open, the GPS function will not work correctly. Make sure the settings are correct for each application.

Replacing the GPS module

If the above methods did not help to restore the navigator’s operation, most likely, the module responsible for its operation is out of order. On iPhone, replacing the GPS module is similar to replacing the cellular antenna or Wi-Fi module. The internal detail of the GPS module is shown in the figure below:

To replace the part yourself, you will need a new antenna, as well as IPhone repair tools:

How to Fix GPS Problems on iPhone/iPad in iOS 12 | iPhone GPS Not Working

Troubleshoot FaceTime on iPhone

FaceTime is a great way to stay connected for free. Therefore, if problems arise with the service, many users immediately start looking for an answer to the question of why Face Time does not work on iPhone.

FaceTime not working

If, after turning on FaceTime, you cannot make a call through it, then the first step is to make sure you have a stable Internet connection via Wi-Fi. Other software causes of service failures include:

  • Disable FaceTime in Settings.
  • Error in network settings.
  • Internet access problems.
  • Using an old version of iOS.

Make sure FaceTime is turned on and activated in your iOS settings. If the system has not been updated for a long time, you should install the available updates. If you run into problems on the latest supported iOS version, reset your network settings:

  • Open the settings.
  • Go to the “General” section.
  • Click on “Reset”.
  • Select reset network settings.

If connection errors were the cause of the failure, then resetting will help fix them. However, in addition to software reasons, there may be hardware problems that can only be fixed at a service center:

  • Internal modem malfunctions.
  • Damaged contacts.
  • Failure of communication modules.

Technical problems can also arise on the side of the device responsible for accessing the Internet router that distributes Wi-Fi. Perhaps in its settings there is a restriction on Internet access, which prevents connecting to the FaceTime server.

Can’t make or receive a call

FaceTime problems can arise for the following reasons:

  • Service and audio call not available in your country or not supported by your carrier.
  • Service does not support call forwarding.
  • You are trying to switch from FaceTime to an audio call or a regular call.

Sometimes, for normal work with Face Time, you have to change the SIM card and even the operator. Check with your provider if they support the service.

Waiting for activation

If none of the above reasons describe your situation, try the following:

  • Make sure your smartphone is connected to the internet.
  • Make sure FaceTime is turned on in settings.
  • If activation does not complete after enabling, disable and re-enable FaceTime.
  • Go to the date and time settings. Set automatic data detection.
  • Reboot your device.
  • Open the list of restrictions (Settings. General. Restrictions) and make sure that they are not set for FaceTime and Cameras.
  • Make sure you have the correct phone number or email address in your FaceTime settings.

Follow these steps sequentially to successfully complete the service activation process on the device.

Turning on Face Time

To use the features of the FaceTime service, you must enable and activate it. For this:

  • Open the settings.
  • Go to the “FaceTime” section.
  • Click “Your Apple ID”.
  • Wait for account activation to complete.
  • Choose a FaceTime calling address and ID that others will find you.

To use FaceTime to make a call, open the Phone app and look for the corresponding icons in the contact details.

You can make calls from the standard FaceTime application: you just need to enter the name and number manually or select from the contact list.

IPhone doesn‘t have FaceTime

We figured out why Face Time does not work on the iPhone, but what should users do who cannot find such an application on their smartphone at all? The service may be missing for three reasons:

  • The application was removed.
  • A restriction is imposed on its work in the settings.
  • iPhone bought in Saudi Arabia, Pakistan or the UAE, where the service does not work.

If the third option is definitely not your case, then check the list of restrictions. Go to the settings and in the “General” section click on the “Restrictions” item. Make sure there is no restriction on the program.

If the application has been deleted, you can restore it by downloading it again from the App Store. After installation, all the options you need to enable and activate FaceTime will appear in the main iOS menu, so you just have to complete the setup.