Laptops and Tablets • Recommendations and advice


Where To Find Laptop Device Manager

Table of Contents

Where are the drivers on Windows
installed devices

After the device driver is installed on the computer, its files are copied to the system drive. In this case, the name and number of the mentioned files, as well as their location on the disk, depend on the specific driver. Usually the operating system “scatters” them in different folders located in the “Windows” and “Program Files” directories.

In some cases, it is necessary to find out where these files are stored and what they are called. For example, when the driver files need to be removed or used to install a device on another computer.

The information presented on this page is also available in the format:

You can get a list of driver files for a specific device installed on your computer through the device manager.


In the dispatcher, in the list of equipment, find the device of interest, right-click on it and select the “properties” item in the context menu that appears;

In the window that opens, go to the “driver” tab, where click the “information” button;

Another window will open, in which the necessary information will be displayed (list of driver files).

Important. If you plan to use the driver files to install the device on another computer, in addition to the files obtained by the above method, you will also need installation readme. You can find it in the C: \ Windows \ inf folder.

By default, the specified folder is hidden. To see it, you must enable the display of hidden files and folders on your computer. How to do it see here.

The installation info file has the extension.Inf. Its name can be determined as follows:

Open the device manager;

Find the desired device in the list of equipment, right-click on it and select “properties” in the menu that appears.

In the window that opens, go to the “details” tab. In the drop-down list located there, select the “INF name” item. After that, the file name will be displayed in the “value” field.

However, a more reliable and SIMpler way to transfer a driver to another computer is to use Special Programs. Driver Genius is a good option.

Driver Genius:

The program will automatically copy the drivers installed on the computer (all or selectively) to the location selected by the user. You need to download, install and run Driver Genius (see the link above), in its window click on the item “Driver Backup” and then answer the program’s questions by the end of the copying process.

Brief information for the inexperienced in what a device driver is, why you need it and how to check its presence or absence in the computer operating system.

One of the frequent problems that users face in the process of configuring computer devices is the inability to install drivers for some of them.

There can be many reasons why this happens. The publication discusses the most common cases, as well as ways to eliminate them.

The article provides information on how to solve problems that arise when there is no driver for a specific device (card, sound card, modem, network adapter, etc.) on the computer.

As you probably already know, the driver. This is special software required for the correct handling of the computer operating system with a device (network card, sound card, webcam, card, etc.).

Manufacturers of computer devices periodically release new drivers for their products, offering them for free download on their websites. But if the device driver is already installed on the computer and there are no problems in its operation, there is no particular point in changing it to a newer one.

However, this does not apply to the card. The new driver is able to significantly increase its performance in computer games and other applications (in some cases up to 20%).

Almost all drivers created for various devices have a so-called digital signature. It is a confirmation that the driver was created by a trustworthy developer, which guarantees that it is free of viruses, spyware worthy of malicious add-ons.

By default, the computer checks the digital signature before installing the driver and only then uses it. This provides a higher level of security.

But sometimes it is advisable to disable driver signature verification.

For example, if the developer has discontinued support for a device and there is no “official” driver for new versions of Windows for it. And the driver that we managed to find has no signature and the computer “refuses” to install it. The risk of negative consequences, of course, increases, but if there is no second option and you are ready to take the risk, then why not try it? Well, don’t throw away a working device just because there is no “signed” driver!

There are several ways to disable verification.

In the process of setting up your computer, you may need to completely remove a specific driver. This may be necessary in case of replacing a card or some other computer device with a new one, installing a new driver instead of the “problematic” old one, and in other SIMilar situations.

For example, NVidia, one of the main developers of cards, recommends completely removing the previous ones from the computer before installing new drivers for its devices.

The article discusses ways to remove both device drivers present in the computer and devices that were once connected to the computer, but are no longer used (unused drivers).


Alternative method of connection through the “Control Panel”

It’s a little longer, but it might be more comfortable this way.

    We go to the “Control Panel” through the “Start” menu, which can be used in the previous method to find “Computer”.

Add comment Cancel reply

This site uses Akismet to combat spam. Find out how your comment data is processed.

Device Manager helps you find out what hardware is installed on your computer, update drivers for any device, check and change hardware settings.

Where is Device Manager located? How to launch Device Manager?

There are several options for opening the Device Manager. All of them do not require serious knowledge of the computer and operating systems at all. Let’s consider them in order.

1. On the desktop, find the My Computer icon. There is one note here. This method will not work if the My Computer shortcut is located on the desktop, and not its icon. You can distinguish a label from an icon by the presence of a small arrow on the label image. So, you should hover the mouse pointer over the My Computer icon and use the right button to open the context menu and select the properties item. In the system properties window that opens, go to the hardware tab, where click below on the Device Manager button.

2. This method is very SIMilar to the previous one, but requires fewer steps. On the desktop, find the shortcut to My Computer. Hover the mouse pointer over it, right-click and select the Manage item in the context menu that appears. The Computer Management window will open, where in the list on the left you can easily find the Device Manager section.

3. Device Manager can be launched from the Control Panel of your computer. To do this, select the following items in the main Start menu:

Control Panel. System and Maintenance. Device Manager

In Windows 7 By selecting the Control Panel section, you can immediately point to the Device Manager.

4. And finally, the last way to start. Using the command line. SIMple enough through Start. Run will launch the command timeline and type the command

And you will see your Device Manager again.

Device Manager is a useful application that must be installed on all modern Windows computers. Opening it, you will find a list of components that are currently located on the computer or connected to it.

It is much more useful and interesting to look at the state of devices in the manager. If you feel that the computer or its specific device is unstable, then go there.

Non-working elements will have a special sign. It also contains important information about device drivers. If something is wrong with the computer components, then a yellow triangle with an exclamation mark will be located near them.

But how to get into this wonderful application and start using it to the fullest. We will consider these issues on the example of all popular operating systems.

READ  How to connect an external hard drive to a laptop

Method 3

Another way:

  • Use the “WinPause Break” keyboard shortcut. Finding them is not at all difficult. The well-known “Win” has the operating system logo on it. On the second button we need, it says “Pause Break” and it is located at the top of the keyboard.
  • Using this combination, you will be taken to the basic information view window. The dispatcher will be in the list on the left.

Opening “Device Manager” in Windows 10

Next, we will consider the process of launching the manager on a more modern and progressive Windows 10. It appeared relatively recently and users are still interested in the question of opening the good old “Device Manager”.

First of all, use the search icon. This is still one of the fastest and most convenient ways to get into the dispatcher. Visually, the Start menu and the search bar have received major changes, but the mechanism of their use remains the same as in Windows 7.

Secondly, you can open the “Device Manager” by right-clicking on the “Start” icon.

    Windows 10 implements a function that was not in previous versions of the system. it is a context menu that appears when you right-click on the “Start” button. Do it.

You can open a very convenient “Device Manager” on any operating system, and it’s quite SIMple to do this.

Method 4

Open the “Device Manager” through the “Control Panel”.

    Click on the Windows logo, in the context menu “Start” click on the item “Control Panel”.

Several quick ways

There are also very short, but not easy ways for everyone:

    In the search line “Start” write: “devmgmt.Msc”. Open the appeared tool.

Note! These methods work equally well on all versions of Windows.

Whichever method you choose, you will find yourself in the “Device Manager” itself. This is a window in which all types of devices are visible and displayed. Clicked on which, a list with specific PC elements is already opened.

Called twice on an element. you will see information about it, including information about drivers.

Opening the “Device Manager” in Windows XP

Let’s start with the oldest and gradually dying OS. Windows XP. Now it is used less and less, but still there are thousands of users who are interested in how to use the device manager on this particular system.

Where to find device manager on laptop

Device Manager. the name itself says what it is. The manager displays all devices, both physical and those. Which are physically available, I do not know exactly what they are called)) In the manager, you can update the driver, disable a device, remove it. But then it will appear again.

It doesn’t matter if you have Windows 7 or Windows 10, the method I will show you works on any system. So let’s go! Hold down the Win R buttons, insert the command:

Clicked OK. the device manager appeared:

Another way to launch the Device Manager is through the control panel. Clamp the Win R buttons again, write the command:

Clicked OK. the control panel appeared, write the word manager in the right corner and in total there is a device manager:

There is even an account manager, which can come in handy too.))

In general, as you can see, nothing complicated. And it will work even for an inexperienced user.

I hope I helped someone)) Good luck and see you soon!

Method 1

One of the most convenient ways is to use the Start Menu search term. This is done as follows:

    Click on the Windows logo in the left corner of the screen to launch the Start menu. At the bottom of the menu you will see a short search term, in which you need to write “Device Manager”.

That’s it, it’s a really easy and convenient way. In general, in the operating system Windows 7 and subsequent, the search mechanism is very well implemented. It is very easy to search for files and programs in turn. Device Manager is no exception.

Note! SIMilarly, you can open the desired program, inserted in the search bar or in the application “Run” the term “devmgmt.Msc”.

Device Manager in Windows 8

In order to manage devices built-in or connected to a computer, as in other versions, in Windows 8 the Device Manager tool is by no means bound to it with the Task Manager. You can run it from the Control Panel or by pressing the WinX combination. This appendix contains information about hardware connection, hardware settings, updated drivers, and more.

Ways to launch Device Manager

Let’s take a closer look at where this program is located in Windows 8 and how to open it. For example, you can find the My Computer icon on the desktop. The cursor is hovered over it and the right button is clicked. However, there is one peculiarity here. It should NOT be a shortcut, but the My Computer icon. Otherwise, such actions will NOT work. From the drop-down menu, select Properties-System Properties-Hardware, where the Device Manager is located.

Alternatively, you can go to My Computer and select Manage. In the Computer Management section on the left is the tool we need. If you enter the application from the Control Panel, then first you need to select the System and its maintenance. From this section, go to the Device Manager. When using the command line, you will need to enter mmc compmgmt.Msc. How you can open the command term in Windows 8 you will learn here.

Tabs in Device Manager

After we go into the application, we will see a list of devices that contain information here. In order to select a certain of them Move the cursor over it. If you right-click, select Properties from the menu. In the window that appears, you can select various tabs, each of which has its own purpose.

So, go to Details, you can select values ​​and properties. If we are interested in events related to the device, then we click on the tab of the same name. The Resources section is quite informative. Here, a list of conflicting devices is displayed at the bottom. This can often be a prerequisite for an error in the system. In addition, in the section, you can change the settings or return them to default.

To carry out the last operation, you should set the selection opposite the Use automatic settings item. If you need other parameters, then you need to click the Change button and remove the selection. After that, it will appear to independently set the input or output range of the device, as well as other configurations. When finished, confirm the changes by clicking OK. You will need to restart Windows 8 for the update to work.

The Device Manager toolbar also allows you to perform various actions. So, there are buttons here, by pressing which you can turn off or turn on the equipment, update its configuration, install available updates, etc. In addition, you can directly control the console of the application itself and change its appearance.

In order to indicate malfunctions of a device, a special system of signs is used in the dispatcher. With its help, you can easily figure out what exactly caused the error in the operation of the equipment. The tool allows you not only to get information about the availability of updated drivers, but also to roll back to the version that was installed before.

Thus, the Manager is an informative and convenient application, the purpose of which is to work with the equipment installed on the computer. There is a fairly large number of tools that both experienced users and beginners can use. The program interface is intuitive, and you can easily figure it out on your own. The application provides the most complete information about devices, their work, compatibility, settings, etc.

How to find the touchpad in device manager

Very often, such a useful thing as the touchpad must be turned off for a while, since NOT many modern laptops can boast of the convenience of its location, but it often SIMply interferes when playing or typing. Today we will briefly talk about the options for disabling it.

If your laptop contains all the necessary drivers from the laptop manufacturer’s website, and in addition to related programs (utilities, etc.), in other words, you did NOT reinstall Windows, and then did NOT use the driver-pack. To disable the touchpad, you can use the methods provided by the manufacturer.

Using function keys

On almost all modern laptops, it is possible to disable / enable the touchpad using a special combination of function keys. For different models of laptops, their options are different. It should be noted that this method works with native drivers.

In many laptops, this is a combination of SIMultaneously pressed FnF9 buttons. But, based on what model. Options may vary.

If your laptop is among the above, pay attention to the function keys for the presence of a picture with a crossed out touchpad on them.

If the picture is not found, it remains to try brute-force (be careful not to disable other necessary functions). Probably, in this case, you do not have special drivers installed, you can update them or resort to other methods described below.

Disable the touchpad through the Windows device manager

If the methods outlined above are not suitable, and you DO NOT want to install programs and drivers from the laptop manufacturer’s website, there is still a method to disable the touchpad. Windows Device Manager will help us. It is possible to open the device manager using various methods, but the one that will work perfectly does not look at anything in Windows 7 and Windows 8.1. it will press the keys with the Windows R logo on the keyboard, and in the window that appears, enter devmgmt.Msc and press “Ok”.

In the device manager Try to find your touchpad, it can be placed in the following sections: Mice and other indicating devices (most likely). HID devices

It can also be named in different ways: a USB input device, a USB mouse, and maybe a TouchPad. By the way, if it is noted that the PS / 2 port is used and this is not a keyboard, then on a laptop it most likely has a touchpad. If you do not know exactly which of the devices corresponds to the touchpad, you can experiment. nothing terrible will happen, this device is back, if it is NOT it. So, to disable the touchpad in the device manager, right-click on it and select “Disable” from the context menu.

READ  Laptop Stopped Seeing Wi-Fi Network

Permanent URL: http://pnb.By/noutbuki/sovetyi/otklyuchaem-na-vremya-tachpad-v-noutbuke.html

Keys for disabling the touchpad in a laptop

Most modern laptops have dedicated keys on the keyboard to disable the touchpad. you will find these on almost all Asus laptops. HP (on some models, double-tapping the upper left corner of the touchpad toggles it on and off), Dell, Lenovo (most often Fn F5 and Fn F8), Acer (Fn F7), Sony (Fn F1), Samsung (Fn F5) and Toshiba (Some brands have them, but not all models). Below, where it is written separately by brand, there are photographs of keyboards with marked keys for disabling. In general terms, you need to press the Fn key and the key with the touchpad on / off icon to disable the touchpad.

Using the button on the touchpad itself

On some laptops and netbooks, the disable button is present on the touchpad itself.

Then you just need to click on this button in the upper left corner.

Disabling the touch mouse via BIOS

Although the previous method is convenient, the disadvantage is that immediately after restarting the TouchPad it will be operational again and you will need to press the above combination again.

You can completely disable it through the BIOS. The BIOS contains settings for all major components, including this.

Restart your laptop. When enabled, press F2 or Del (or other options depending on BIOS version).

Clean WinSxS folder in Windows

Go to the Advanced field and find the Internal Pointing Device parameter. “Enabled”. to enable, “Disabled”. to disable.

Another parameter may look like this. (Read the manual for your laptop, where you have this parameter in your BIOS).

Touchpad on a laptop. turn the panel on and off

All laptops are currently equipped with a touchpad. This is a touchpad, the function of which is to replace a computer mouse. In some cases, the touchpad may interfere with normal operation. For example, when typing in the editor, they accidentally clicked on it, and the cursor moved to another part of the screen. With repeated repetition, this state of affairs can get bored.

There are also reverse situations, the TouchPad stopped working for some reason, what should I do? Let’s talk about both cases in more detail. It should be noted that turning on the touch mouse is SIMilar to turning it off, only it is carried out in the reverse order.

Disable Using synaptics

Many laptops use a Synaptics touchpad. If this is your case, the TouchPad is easily disabled in the Control Panel. Which you will find in the Start button.

There we select Hardware and Sound.

Next, select Mouse and its properties, where we go to the Pointer Options tab.

You can disable the TouchPad completely here. And you can make it turn itself off when you connect a mouse to a laptop.

How to find out which touchpad is on a laptop?

If you are using a Microsoft Windows operating system, do the following:

  • Go to Device Manager (Control Panel-System-Device Manager (in Windows 7 on the left))
  • Open the section “Mice and other pointing devices”
  • This section contains the name of the touchpad model (for example, Synaptics PS / 2 port TouchPad, i.e. a touchpad manufactured by Synaptics on a PS / 2 port)

For more details:

  • Right-click on the device name, then go to the “properties” menu
  • Next tab “details”
  • In the “Properties” section, select “Equipment ID”
  • On the site we drive in the equipment identifier and get the data

The author of the question chose this answer as the best

Add to favorites link thank

Over a year ago

I also have Windows 8 on my laptop, but I prefer to use a regular desktop, as I’m used to. There, determining the name of your touchpad is NOT difficult. Hover the cursor over the start button and click the right touchpad button. This window pops up, in which we find the Device Manager:

Click on this button and get the device manager window. Among the drop-down list of all installed devices, we find the item Mice and other pointing devices:

We click on this button and we see that at the moment the laptop is using the Synaptic touchpad:

If it is called twice, the touchpad properties window opens, but for me there is nothing interesting there:

Never thought about a touchpad. Through the control panel, you can see the touchpad driver, you can also disable it or configure it as you like. All this is done from the control panel. On Windows 8, it’s a little different. press start, select the asterisk (computer settings), from the bottom left, click on the “control panel” button. hardware and sound. device manager. Next, find mice and other pointing devices. You will not see the names and models there. On my computer you can see the driver versions, but it does not find them on the Internet and does not give any information about them.

Add to favorites link thank

Over a year ago

You can find out which touchpad on a laptop is as follows. Click on the start menu. After that, in the menu that appears, select the item called “Device Manager”. After you select this item, a window will open in front of you, where you can see all installed devices. From here you will need to select the item with the name “Mice and other pointing devices”. After that, you will see information about what kind of touchpad you have on your laptop.

Where To Find Laptop Device Manager

Add to favorites link thank

To understand what kind of touchpad you have, you just need to look at the settings on your laptops. You need to get into the “Device Manager”. To do this, through the start menu, find the Control Panel. Of all the shortcuts, you need to find the system. Opening a table in front of you, you need to get to the equipment bookmarks. And press the device manager key. Look in the subsection “mice and others.”

Add to favorites link thank

Where is Device Manager in Windows 10 and how to open it?

To find the location of the utility responsible for the device manager, open the folder located in the system partition of the OS, namely: “C: \ WINDOWS \ system32”. This folder contains the required tool called “devmgmt.Msc” by opening it. you can manipulate the software of devices connected to the computer.

How to open Device Manager in Windows?

The Device Manager is responsible for storing information about your computer’s hardware. The manager contains data about all devices that were installed on the user’s PC. With the help of this manager, it is possible to fully remove devices from the OS or update drivers for it.

How to open Device Manager in Windows 7

To open the device manager, follow these steps:

  • Right-click on the “Computer” icon.
  • In the menu that opens, go to the item called “Properties”.
  • In the window containing basic information about user PCs, select the “Device Manager” section.

The next way to start the dispatcher in Windows 7 is even easier:

  • Hover the cursor over the computer icon again and press the right mouse button, in the menu that opens, they will call the item “Control”.
  • In the auto goods computer control window, select the item “Device Manager”.

Another common method for invoking the Windows 7 Device Manager includes the following sequence of steps:

  • Press the “Start” button.
  • In the search bar for files and programs, enter the following query: “devmgmt.Msc”, then press “Enter”.

The above methods are also suitable for other versions of Windows.

How do I open Device Manager in Windows 10 in other ways? Consider another launch option:

  • Using the “Start” menu or by entering a combination of buttons “WinR”, the system tool “Run” opens.
  • Enter the name “devmgmt.Msc” and after clicking “Ok” the user will see the interface of the device manager. (Everything is the same as in the seven)

You can call the dispatcher using the command line, in which you enter the same command “devmgmt.Msc”. By pressing the “Enter” key, a list with all connected devices will open.

A system such as Windows 8 includes improved functionality for a convenient navigation menu. Windows 10 has acquired identical options, to activate which you must press “WinX”, in addition, you can call such an interface in Windows 10 by right-clicking on the “Start” menu. Naturally, the navigation functionality will contain an item with the necessary device manager.

Where is Device Manager on Windows XP and how to open it?

The tool responsible for storing devices connected to the PC is located at “C: \ WINDOWS \ system32”, its name is “devmgmt.Msc”.

After figuring out where the Device Manager is in Windows XP using the above method, you can open it.

There is one more way to launch this dispatcher, for this you need to perform the following series of SIMple actions:

  • Click on the computer icon on the desktop with the right mouse button and select the “Properties” parameter.
  • Go to the “Hardware” tab in the window that opens, which contains the item with the device manager.

How to find out which card is on a laptop

Our instructions will help you determine which card is on your laptop.

How to see which card on a Windows laptop

You can check which card is running on a laptop without extraneous programs and disassembling the device. just look at the Windows settings. The model name of the graphics card is listed in the “Device Manager”, display settings and in the manufacturer’s proprietary junk.

What card for MacBooks

If you are using an Apple laptop, you can find its specifications on the manufacturer’s official website under the Mac section. Another option. Use the power of the system: go to the menu “About This Mac”. “System Information”. Graphics card specifications will be listed under Hardware. Graphics / Monitor.

Device Manager and System Information

The manager works in both old and new versions of Windows. all screenshots in the article are taken in Windows 7.

The “Device Manager” menu is hidden under the address “Control Panel”. “System”. “Device Manager”. It’s easier to enter the name of the utility in the search bar in “Start” and select the first option from the list found. The manager lists all the components of your laptop; the name of the card is specified in the “adapters” tab.

READ  How to connect laptop hard drive to computer

If there is no card in the list at all, but it says “Unknown device”, take a look at this article. In the section “Looking for Device ID” we described in detail how to solve the problem.

If you find it easier to use the command term, rather than the start menu, open it with the [Windows] [R] keyboard shortcut and enter the MSInfo32 command. In the section “Components”. “Display”. “Name” the name of the card will be indicated.

Screen settings

Exit to the desktop and right-click. Select “Screen Resolution”. In the “Additional parameters” tab, go to the “Adapter” section. the specifications of the card installed on the laptop will be indicated there.

How to find out the model of an integrated card

Most laptops, if they are NOT designed for gaming, are equipped with integrated cards. that is, built into the processor. In this case, the “Device Manager” will NOT indicate specific specifications of the model, but only its name. for example, Intel HD Graphics.

To find out the detailed characteristics of the integrated card, you need to find out which processor the laptop is running on. It is easiest to see it in the “Start” menu by right-clicking on the “Computer” section and opening “Properties”.

You can also find the processor name through the “Device Manager”, go to “Control Panel”. “System and Security”. “System” as described above. After that, google the CPU model and find out all the parameters of the graphics chip, which is installed in it.

Manufacturer’s software

It is easy to see information about the card in the manufacturer’s proprietary program. The Nvidia Control Panel can be opened from the desktop by right-clicking and going to the section of the same name. The card model will be listed at “System Information”. “Components”.

The same is the case with the utility from AMD: from the desktop, go to AMD Radeon Settings and look in the tab “Overview” and “Hardware”.

How to find out which card is on a laptop through third-party programs

If you have any system optimization or analysis software installed on your laptop, you can use it to determine the map.

In CCleaner, the name of the map is indicated in the header of the program window.

In the CPU-Z application, which can be downloaded here, the graphics card model can be found in the “map” section.

In TechPowerUp GPU-Z, this information is located under the Graphics Card tab.

To find the model of the card in AIDA64, you need to go to the section “Computer”. “Summary information”. “Display”. “3D accelerator”.

Blog about modems, routers and gpon ont terminals.

Equipment setup. How to turn on Wi-Fi programmatically.

The wireless adapter can be turned off by software. that is, it was turned off in the settings of the Windows operating system. Turn on Wi-Fi on a laptop if it is turned off in the operating system settings in two ways.

Method 1. enabling via the Network and Sharing Center.

Press the WinR key combination and in the window that opens, enter the command: ncpa.Cpl.

Thus, we will immediately open the section “Changing adapter settings” (in Windows XP this section was called “Network Connections”). Here we are looking for “Wireless Network Connection”.

If it is gray, it means that Wi-Fi is disabled. Right-click on the wireless network connection and select the “Enable” menu item. After that, we try to connect to the wireless network.

How to turn on Wi-Fi on a laptop?!

Almost every fifth apartment has a wireless network. People easily use the charm of wireless communications on their laptops, but when even the SIMplest problems arise, they immediately fall into a stupor and do not know what to do about it, since for many it is a dark forest, unfortunately. I will try to help, and I will tell you in more or less SIMple language how to turn on Wi-Fi on a laptop if it suddenly turns off. over, the instruction from Step 2 will be useful Not only for the owner of laptops, but also for owners of ordinary computers on which a Wi-Fi adapter is installed.

How to enable Wi-Fi on a laptop in hardware.

On some laptop models, you first need to turn on the Wi-Fi adapter with the button.
Examine the laptop case carefully. The Wi-Fi enable button can be in the form of a slider (usually on older models):

Or as a separate button:

If there is a separate power button, then look at the laptop keyboard. namely, the F1-F12 keys. One of them should have a Wi-Fi icon in the form of an antenna. The most commonly used combination of function key and F5:

If you use a USB adapter, then it usually has a separate Wi-Fi power button, so the adapter is always turned on in hardware.

Method 2. Enabling via device manager.

In the device manager, as a rule, network adapters are rarely disabled, since this is SIMply not necessary and they do it only as a last resort, or it happens due to a failure. And if the Wi-Fi adapter is disabled in the device manager, then there will be no “Wireless Network Connection” icon in the network connections at all. To turn on Wi-Fi, you must first go to Device Manager. To do this, as in step 1, press the WinR key combination and in the Run window write the command: devmgmt.Msc, press OK. Windows Device Manager will open.

In the “Network adapters” section, look for a device whose name contains Wireless or Wi-Fi. Click on it with the right mouse button and select the “activate” menu item. If suddenly the device refuses to start and an error is displayed. try to download the drivers for the adapter from the official manufacturer’s page and install them.

There is one more trick that you have to do if your laptop has Windows pre-installed from the factory. It consists in the fact that sometimes you have to run a program for managing wireless networks from a computer manufacturer. Such programs come with almost every laptop. They are called “wireless assistant” or “Wi-Fi manager” and are located in the Start Menu. “Programs” (“All Programs”). I met a couple of laptop models on which Wi-Fi seems to be on everywhere, but until you run the utility, the adapter does not catch the network.

If you have turned on the adapter, but cannot connect to a wireless network. see this article: Troubleshooting Wi-Fi Problems.

What is Device Manager and how to find it in Windows 10

What is Device Manager in Windows 10? Many functions in Windows, which can help us understand a particular situation, are hidden from our eyes. And it is right. If you want to delve into all the intricacies of your computer, then you don’t need it. Call the master, and he will fix everything for you. If your budget is oversized, then you can call it every day. But there are situations when you desperately need to deal with your computer, and you can easily do this without outside help if you know where to look for the answer to your question. It is not always possible to go online and read an article on a topic that interests you, but you can easily do the diagnostics of your computer yourself. Almost all the information you need on your computer’s devices is in Device Manager.

What is Device Manager in Windows 10

What is Device Manager

Device Manager is a special utility (small program) that is included in the operating system to control all devices connected to this computer (namely the motherboard).

Such devices can be: microprocessors, hard drives (HDD), card (adapter), sound card, IDE ATA / ATAPI controllers, USB controllers, mass storage controllers, monitors, keyboards, mice, COM and LPT ports, network adapters (network cards), HID devices, and the like.

It is with the help of the Device Manager that we can find out about the conflicts of THESE devices and about their drivers (popularly called “firewood”). Drivers are also special firmware, written by programmers-developers, for all computer devices.

Only with the help of drivers does the computer interact with all devices. If you connected a new device but did not download a driver for it, then this device will NOT work. True, now operating systems are so “smart” that they can find a suitable driver in their database and install it without your help.

But this is, as a rule, a basic driver, and in order for the device to work fully with all its additional functions, it is better to install its “native” driver, which can be found on the manufacturer’s website of this device.

You can find EVERYTHING on the Internet, the main thing is to know how to do it correctly. To do this, you need to learn at least the basics of the Internet.

If a driver is not loaded or is not suitable for this device, then the Task Manager will put a question or exclamation mark in a yellow box in front of this device.

Where is Device Manager and how to get there

In any Windows operating system, you can get to the Device Manager through the System window. I use the easiest, as it seems to me, way.

  • Find the icon or link “This PC” (in Windows 10), or “Computer” (in Windows 7/8), or “My Computer” (in Windows XP). I have it displayed on the Desktop. You most likely have it in the Start menu.
  • Click on this icon or link with the right mouse button, and select the Properties link from the drop-down menu.
  • Find the case link “Device Manager”. In Windows XP, see the tab at the top of the System window. And go over it.
  • This will open the “Device Manager” window. Here you can check connected devices and even disconnect them.