What to do if a button on iPhone stuck

Table of Contents

Disable quick access settings

Many people know about the existence of the item “Universal Access”. To enter this section, click on Home three times. Here you can create a loupe. This will allow you not to constantly enter the settings. It helps, but still the Home button will change its functionality. When you press Home three times, the iPhone waits for a few seconds to determine if you will press more, which leads to braking.

To disable this option, go to:

  • settings;
  • basic;
  • Universal access;
  • keyboard shortcut.

button, iphone, stuck

Home button stuck on iPhone 6

For iPhones purchased more than 200 days ago, the Home button starts to jam at some point. Not all devices, of course, but mine was out of luck. Either the fat on the contacts interfered with the current flow, or the former moisture inside the case is to blame for the absence of signs of life, but the most important button of the phone stopped responding to pressing.

WD-40 is an American company and trademark of a well-known aerosol drug developed by Norman Larsen in 1953 for the Rocket Chemical Company of San Diego, California. It was originally developed for industrial users as a water repellent agent to prevent corrosion. It was later found to have many possibilities for home use as well.

The exact formula of the product is still a trade secret and is closely guarded. The product is not patented to avoid disclosing the manufacturing technology Wikipedia

So, take the iPhone, spray the WD-40 jet on the Home button, press it several times through the napkin, then spray it and press it again. After two minutes, the button comes to life. A specially filmed video below, the advice itself spied on a lifehacker.

Things to remember: 1. Do not let WD-40 come into contact with the mucous membrane;

Make sure you understand the risks, because there are different opinions on the web about how WD-40 works on electronics. Some say it’s okay. Opponents, on the other hand, try to persuade in every possible way against spraying liquid on any kind of scheme, because the “vedeshka” attracts moisture from the atmosphere and promotes even greater oxidation of contacts.

Wipe the phone well with a damp cloth to remove oily deposits WD-40.

I had no other choice, because it’s already evening, it’s a long way to go to the service center, and I need a work phone now. Who is right. time will tell. In two weeks I will write down how my phone works.

Thanks for the tip, ToyoDjUa.

Update by DENgerous: sometimes calibration helps.

We launch any native application on the iPhone: notepad, weather, safari. 2. Hold down the Power button so that a red Slide to Power Off bar appears on top. 3. Release Power, press and hold Home until the bar disappears and the application closes.

Update 03/19/2012 The button works.

Update 09.05.2012 Button works.

Update 05.07.2012 Button works.

(5.00 out of 5, rated: 2)

The multifunction Home key can unlock the display, return to the home menu, and more. The key is often used, which is why the Home button on the iPhone 5s jams during use. This key is designed for continuous operation, but it may fail later. Button on iPhone stuck most often due to firmware failure.

IPhone Home Button Stuck. Disable Quick Access Settings

To disable the feature, open Settings. “Basic”. “Universal access”. “Keyboard shortcut” and uncheck all the boxes.

Calibrate iPhone Home Button

There is one interesting trick available in iOS that you can use to calibrate the Home button. It is not completely clear why and how it works, most likely in this way the memory is cleared and applications that affect the processor are closed. Here’s how to calibrate the Home button:

How to fix a jammed home button without disassembling Apple iPhone home button repair and reset DIY

Open the Weather program, Stocks or any other pre-installed application.

1) Press and hold the power button until the Power off slider appears.

2) Now press and hold the Home button for 8 seconds until the slider disappears.

Reset settings

If you suspect that the delay in pressing the Home button is caused by a change in settings, but do not know which ones, then iOS can restore the default settings with one click. To reset all settings, open Settings and select General. “Reset”. Reset all settings. This will reset all settings to their default values, but will not affect the data on your device.

If none of the above helps, you can reset your iPhone to factory settings. To do this, open “Settings”. “Basic”. “Reset”. Erase All Content and Settings. Please note that in this case all data will be deleted, so be sure to make a backup before performing a factory reset.

Location and Description

Where is the Home button on the iPhone? Every owner of the device should know about this. It’s not hard to guess what kind of smartphone control we are talking about. The studied button is located at the bottom of the gadget, on the front panel, under the screen. It is made of glass and has a round shape. The button itself usually has a small square, but it may not be. It all depends on the iPhone model. The control is present in any “apple” product.

Functional

What can the Home button on iPhone be used for? It has a wide range of uses. There are several options for pressing the button. one, two and three. Depending on this, the command executed on the smartphone will change.

READ  How to make a screenshot on the iPhone XS

For example, on iPhone, using this button you can:

  • unlock the device;
  • close the program, application or game;
  • go to Recovery Mode;
  • launch widgets of a smartphone or tablet;
  • activate one of the standard programs;
  • open a menu showing multitasking applications (in the latest iOS versions);
  • enable and use voice control (triple tap).

The first 4 points are the same for all iPhone models. The rest of the functionality depends on the installed operating system. Often, users themselves can set in the gadget settings, for which the “Home” button on the iPhone will be responsible. Therefore, it is difficult to say exactly why it is used. It is enough to remember that with its help you exit the programs, unlock the device and switch to Recovery Mode.

If it doesn’t work

As already mentioned, the mentioned control is used constantly in practice. Therefore, sometimes the owners of “apple” products complain that the Home button refuses to perform its functions. Fortunately, Apple has made sure that all the controls on smartphones and tablets are robust enough. In most cases, breakdowns are repaired quickly and easily.

So, if you want to make the Home button on the iPhone working after some kind of failure, you must:

  • Clean the control and lubricate it. It is best to use special lubricants and alcohol for this purpose.
  • Calibrate the button. To do this, any system application (say, a calendar) opens, after which you need to hold down the button to turn off the smartphone until the functional menu appears. Next, the Home button is clamped. Keep it until the menu disappears.
  • Correct the position of the connector. The gadget is connected to a 30-pin cord, after which you need to lightly press the place where the wire is connected to the iPhone.

All of these tips will help bring the Home button back to life if a system crash has occurred. In case of hardware damage, the control element will have to be replaced. It is advisable to seek the help of specialists. They will replace the button without any problems and return it to work.

Home button on iPhone: where it is, how to display it, what to do if it doesn’t work

Modern smartphones are made with a minimum of buttons. and more preference is given to touch control. Today you will be presented with the Home button on the iPhone. What is this control? What functions is he responsible for? Where is the button located? What if it stopped working? The answer to all these questions is much easier than it might seem at first glance. Even an inexperienced iPhone owner can figure them out.

What is the button

It is important to be aware of which mobile device control you are talking about. Home button on iPhone. this is one of the few keys that can interest the user. It is the most functional device control element.

It is noted that the Home button is used on a smartphone more often than others. It supports a variety of options. They will be discussed further. This control is mainly used to unlock the iPhone or to exit the game / program.

Output on display

But there is one more trick. It will help you use the control you are learning without its physical form. The Home button on the iPhone screen is not uncommon. Every modern owner of “apple” products can display it and use it if necessary. This function is usually used on newer iOS. There is a special function for displaying a button on the screen. It’s called AssistiveTouch. It is suggested to enable it in a few clicks.

precisely, to display the Home button on the device display, you will have to:

  • Open “Settings”. “Basic”. “Universal access”.
  • Find AssistiveTouch. Click on this line.
  • Move the function pointer to the “On” position.

This is the simplest and fastest solution for bringing your idea to life. A graphic image of the Home button will appear on the screen, which can be used along with the physical interpretation of the element. Nothing difficult, incomprehensible, or unusual. If the Home key is displayed, it can be dragged to any place convenient for the owner.

The chemical method for solving the problem

A common cause of iPhone Home button malfunctions is dirt and dust particles getting inside it. This also happens after liquid, for example, sweet drinks, gets under the body of an old or new smartphone, or if the device is taken with dirty hands. An effective way to quickly eliminate the problem in this case will be the use of chemical cleaning agents. This can be isopropyl alcohol or WD-40. To use this method of fixing the problem, perform a few manipulations:

  • add a small amount of funds to the Home button on the home screen
  • press the button and hold it down until the cleaning agent penetrates inside
  • check the operation Home after the alcohol has completely evaporated

Apply the chemical only to the key, not to the screen. Rough handling of the cleaning agent can break other parts of the phone, increasing the cost of repairing your Apple device.

IPhone Home button not working properly. check the responsiveness of the Home button

You can adjust the speed required to double or triple press the Home button. By default, the maximum speed of the button response is set on the smartphone. It is possible that someone could accidentally change this value. To check the click speed, open “Settings”, go to the “General” section. “Universal access”. “Home”. Then make sure the click rate is set to “Default”.

Check the function of the key

To see if the Home button on iPhone works or not, press it at least ten times in a row. If there is no reaction to at least a couple of clicks, then there is a malfunction that affects the performance of the key.

Key repair or replacement

If the above activities did not help, and the last method does not suit you, and you want to fully use the functionality of the iPhone smartphone. contact a qualified technician who will help you repair or completely replace a failed key. The cost of repairs will be low if you order the service from specialists registered in Yuda. Working with them will give you the following benefits:

  • iPhone repair with complete replacement of faulty elements (connector, cable) in the service center and at home
  • elimination of phone breakdowns of any complexity in a short time
  • the use of professional equipment and original spare parts with a complete replacement of device parts
  • guarantees for all types of work performed

iPhone 6 / 6s / Plus: Home Button Stuck, Sticky, Unresponsive, Wont Work, Broken- 3 Fixes!!!

If the iPhone Home button does not work, contact the specialists. Yuda’s executors will determine the cause of the phone breakdown as accurately as possible and quickly fix the problem, the cost of iPhone repair will be low.

READ  How to turn on blinking when calling on iPhone

Check the responsiveness of the Home button

Home button on iPhone 6 glitches and not responding as fast as you want? Check the parameters that may have changed during operation. We go to:

  • settings;
  • basic;
  • Universal access;
  • pressing “Home”.

Make sure everything is set to “default”. And the key should work efficiently. Also read what to do if Home button on iPhone not working.

How to reanimate the phone

If on your device the Home button works intermittently and does not always respond to pressing, do not get upset. Once you find the root cause, you can use several methods to restore the Home button to its former functionality. These include the following:

  • calibration
  • changing the position of the keystroke connector
  • dry cleaning buttons
  • displaying the Home button on the main screen using a special program

Features of adjusting the connector on iPhone

If you own an iPhone 4 and 4S and are faced with a button malfunction on your smartphone, do not rush to change it. The situation can be corrected by changing the position of the connector. For this:

  • connect the cable that came with your device to the phone
  • push down on the plug where it fits into the connector, press and hold the Home keys at the same time

Now, unplug the cable and check if the cause of the breakdown has been eliminated and the button has worked. If you cannot fix the problem, you can use another method to restore the functionality of the Home key on the main screen.

Disable quick access settings

Many people know about the existence of the item “Universal Access”. To enter this section, click on Home three times. Here you can create a loupe. This will allow you not to constantly enter the settings. It helps, but still the Home button will change its functionality. When you press Home three times, the iPhone waits for a few seconds to determine if you will press more, which leads to braking.

To disable this option, go to:

  • settings;
  • basic;
  • Universal access;
  • keyboard shortcut.

Restart iPhone

Still stuck on the iPhone home button? Then there is another effective way to troubleshoot the problem. restarting the iPhone. To do this, you need to turn off your smartphone and turn it on again:

  • Hold down the power button. Depending on the model, it can be located on top or on the side.
  • The “shutdown” screen will appear, where you need to move the slider.
  • The device turns off.
  • To turn it on, you need to hold the same button until the Apple logo appears.

Check the responsiveness of the Home button

Home button on iPhone 6 glitches and not responding as fast as you want? Check the parameters that may have changed during operation. We go to:

  • settings;
  • basic;
  • Universal access;
  • pressing “Home”.

Make sure everything is set to “default”. And the key should work efficiently. Also read what to do if Home button on iPhone not working.

Activate the virtual Home button on the iPhone screen

Thanks to Assistive Touch, you can bring the Home key to the display itself. To do this, go to:

7 Solutions to Fix Stuck iPhone Volume Key

  • Settings.
  • The main.
  • Universal access.
  • Assistive touch.

Drag the slider to the far right. virtual Assistive Touch for iPhone control is activated.

Calibrate iPhone Home Button

To quickly calibrate the Home key on your iPhone, you need to do a little trick. Run any application. While holding down the phone’s power button, wait for the “Power off” picture to appear. Feel free to click on Home, and after a few seconds you will see that the slider has disappeared. The done trick will close the application and then restart it, after that you will notice more work efficiency.

What to do if the keys on the keyboard get stuck

Keys can stick for various reasons, but as a rule, it is something spilled: tea, soda, juice. If this happens, then it is necessary to dry the surface as quickly as possible, and the laptop or computer must be turned off directly. If you do not dry it, the keyboard will naturally dry out on its own after a while, but it will start to “stick”. And after a certain time, the contacts will completely rot, the entire keyboard will be completely unusable.

Reasons for Sticky Keys on the Keyboard

The cause could be software or mechanical failure. For example, if the button is not returned to its original position, it is likely that debris has collected under it, because of this, the button sticks to the base.

There are often cases when the button sticks during games. For example, this behavior is typical of the “W” key, which is often held down by players. The same problem occurs when this mode is enabled in the OS settings. If the problem is in the software, it can be fixed without any problems.

To exit the sticking mode, you need to perform a certain procedure in the settings. In some cases, the buttons stick on the laptop due to overheating, this can be eliminated by removing the laptop and cleaning all elements of the cooling system with further processing with thermal paste in the most problematic areas.

Operating system dependent

The sticking mode is activated independently, for this it is simply necessary to hold a certain button for a certain time. In this case, you can hear a squeaky sound. This usually happens during the game, when it is often necessary to hold down a certain button. A window pops up on the monitor prompting you to turn on sticking.

To remove sticky buttons on a Windows 7 computer, do the following:

  • Click “Start”, after “Control Panel”.
  • Click on “Accessibility”.
  • After we find “Facilitation of working with the keyboard”, then “Simplification of parameters”.
  • A window will appear in which you need to uncheck all the “ticks”.
  • Then find the line “Sticking Options”.
  • In the parameters, you can customize the sticking functions.

In newer flavors of Windows (version 8 and above), sticky buttons are disabled as follows:

  • You need to open the panel on the desktop.
  • We select “Parameters”, after “Changing parameters”, a window with parameters will open.
  • Click Accessibility, after Keyboard. Make settings.

Attention! But it will not work to remove sticking in this way. To do this, you need to use the algorithm that was described above.

How to fix sticky keys

If only a few buttons stick, this can be easily fixed. You need to take something flat, such as a screwdriver, and pick up a sticky button. You can clean the dirt in the connector with a hair dryer, but in cold mode.

Attention! Directly the button must be wiped with a cotton swab soaked in alcohol and left to dry. Then it is installed in the socket until a characteristic sound by gentle pressing. The same procedure is performed with the rest of the sticky buttons.

How to eliminate mechanical sticky keys

  • Curved surface, after which certain buttons are at an angle.
  • The button has sunk inward. In some cases, this is not a hindrance, since sticking mode is not enabled, and you can make a regular press with a little effort. But the aesthetic appearance of the keyboard is not very attractive.
READ  How to turn off Okko subscription on iPhone

If a simple keyboard on a computer can be easily untwisted and yourself (although it is not advised to do this, since it is sometimes difficult to combine the buttons with the contacts that are below), then with a laptop it is much more difficult. But even this can be done independently, without contacting specialists.

Most often, disassembly of laptops begins with the keyboard, this makes it easier to carry out all the operations. Disassembly stages:

  • Take a photo of the device to make it easier to remember where which button was.
  • Remove the broken key (you can just pry it off with a screwdriver).
  • Fasten back immediately. If the buttons still stick, then either the key is in the lift or there is a problem with the spring.
  • The surface of the button is fixed to the lift with latches. He has several movable mounts. Dismantle the elevator and inspect for damage. Probably broken hardware.
  • Replace hardware. If everything started working, the problem was in the fixator.

often than not, sticking buttons will not require sending the laptop to a service center. In the case when this happened due to software sticking, then this can be corrected by yourself, if mechanical damage. repair is also quite possible to do without asking for services in a repair shop.

How to restart iPhone if the Home button is not pressed well

Tenorshare ReiBoot will help you fix your Home button problem with one click for free. Entering and exiting recovery mode can reboot your device and reanimate the Home button. Follow these steps:

Download and run Tenorshare ReiBoot on your computer (Windows or Mac), and connect your smartphone to your computer.

Click “Enter recovery mode” and enter the device into recovery mode, a lace and an iTunes icon will appear on the screen.

After that, click on the “Exit recovery mode” button, and the iPhone will reboot, the Home button will start working.

over, the program is able to exit any freeze, for example, freezes on the apple logo, freezes in recovery mode, freezes when updating the firmware, freezes when you call, reboots cyclically, black and blue screens, etc. The utility will allow you to solve most of the errors in the system without losing data.

Standard 30-pin cable

  • Insert the plug of the USB cable into the connector of the iPhone or iPad;
  • Place your finger under the plug located in the connector;
  • Gently press your finger on the connector in the “Bottom-Up” direction and press the Home button.

Why does the home button not work on iPhone

In addition to updating to iOS 12, if we talk about the reasons for the failure of the Home button in iOS devices or it works with some lag (sticks), there are 3 reasons that can be distinguished: 1. Software glitches 2. Mechanical damage. 3. When the Home button “sticks”, clicks, sticks, does not work well or does not work at all.

Home button not working on iPhone and iPad after updating to iOS 12

One of the common problems that happen with iPhones and iPads is that the home button does not work on the iPhone 4 / 4s / 5 / 5s / 5c / 6 / 6s / SE / 7/7 Plus, or the home button does not respond to pressing and is pressed itself. And today we will find out why the home button on the iPhone does not work, what to do if the Home button on the iPhone or iPad does not respond to pressing, and how to restart the iPhone if the home button is pressed badly.

Home button not working on iPhone how to display

There are still several ways for problems to arise. You just need to press the buttons with your own hands without having to restart the device.

Re-flashing the device

Again, a method suitable exclusively for apple gadgets equipped with a touch button. If the reboot method does not work, you can try heavier artillery. completely reflash the device.

    Be sure to update your iPhone backup before starting. To do this, open the settings, select your account name, and then go to the “iCloud” section.

Select the item “Backup”, and in the new window, tap on the button “Create a backup”.

Read more: How to put iPhone into DFU mode

  • When iTunes detects the connected device, you will be prompted to start the restore process right away. After that, the program will start downloading the appropriate version of iOS, then remove the old firmware and install the new one. You just have to wait until the end of this procedure.
  • What to do if the Home button stopped working

    Below we will consider a few recommendations that will allow you to either bring the button back to life, or do without it for a while, until you resolve the issue of repairing your smartphone at a service center.

    What to do if the Home button on iPhone doesn’t work

    Button development

    Many iPhone 6S and younger users know that the Home button is the weak point of a smartphone. Over time, it starts to work with a creak, may stick and sometimes not respond to pressing. In this case, the well-known aerosol WD-40 can help you. Sprinkle a small amount of the product on the button (this should be done as carefully as possible so that the liquid does not penetrate beyond the gaps) and begin to click it repeatedly until it responds correctly.

    Restart iPhone

    This method makes sense to apply only if you own an iPhone 7 or newer smartphone model. The fact is that these devices are equipped with a touch button, and not a physical one, as it was before. It can be assumed that a system failure occurred on the device, as a result of which the button simply stuck and stopped responding. In this case, the problem can be solved easily. just restart the iPhone.

    Button duplication

    If it was not possible to restore the normal operation of the manipulator, you can use a temporary solution to the problem. the function of software duplication.

      To do this, open the settings and select the “General” section.

  • Activate this parameter. A semi-transparent replacement of the Home button will appear on the screen. In the “Configure Actions” section, configure the commands for the “Home” alternative. To make this tool completely duplicate the familiar button, set the following values:
  • One touch. “Home”;
  • Double tap. “Program selector”;
  • Long press. “Siri”.
  • If necessary, commands can be assigned arbitrary, for example, long-term holding of a virtual button can create a screenshot.

    If you were unable to reanimate the Home button on your own, do not delay going to the service center.