Laptops and Tablets • Recommendations and advice

iPhone

The screen on the iPhone has increased what to do

Table of Contents

White screen on Iphone

And get the best deals from trusted masters.

  • Compare and choose the best conditions
  • Feedback from interested professionals only
  • Don’t waste time communicating with intermediaries

How to Keep Your iPhone Screen On

Despite the fact that Apple produces fairly high-quality electronics, fans of gadgets with the apple logo are still not immune from problems, and one of them is the white screen on the iPhone. Sooner or later, such a nuisance can happen to every owner of a gadget, therefore it is better to immediately arm yourself with the knowledge of what to do in this situation.

IPhone screen and LCD panel

A broken LCD panel is a more serious problem. As a rule, this part cannot be repaired. However, a simpler outcome is also possible. if the panel itself is in order, and the contact simply disconnected. In this case, it is enough to do the following:

  • remove the back cover of your iPhone. arm yourself with small screwdrivers and a suction cup to gently remove the back cover
  • inspect all contacts (they are numbered). you should be interested in contact number 1
  • if it does not “sit” in the right slot. just gently insert it into place
  • assemble the device

If it was an LCD panel, then the white screen should stop glowing. After turning on the iPhone, it should boot normally.

Why does the iPhone screen turn white?

The symptoms described above can have different initial causes. Let’s consider the probable causes of breakage and methods of “curing” the white screen on the iPhone:

  • software errors. “treated” by connecting to iTunes
  • breakage of the LCD panel. it needs to be replaced
  • breakdown of the digitizer (the device responsible for touch functions). replacement of the panel and digitizer is required
  • mechanical damage. diagnostics and restoration or replacement of parts is required

Fortunately, in all cases, except for the last one, the white display can be “cured” without going to the service, which means that long waiting times can be avoided.

How to understand that your gadget has this particular malfunction

The “white screen of death”, as iPhone users often call this problem, can be easily distinguished from any other malfunctions. The main signs of a breakdown:

  • the white screen on the iPhone is on, and the smartphone does not perform any further actions
  • a white screen and a black apple are on (as when loading the device), but the desktop does not turn on

In this case, the gadget usually turns off normally, but when turned on does not load the desktop. Both of these signs indicate that an error has occurred in the program, or the iPhone screen turns white due to hardware problems. As a rule, it is impossible to get rid of a white monitor using the usual methods. the gadget turns off, but when turned on it does not load the desktop, and the screen just continues to glow.

In some cases, getting rid of the “white screen of death” is quite simple, without even resorting to the help of specialists. However, if a gadget with an apple logo falls from a height, most likely the white monitor lights up due to mechanical damage, and it is far from always possible to get rid of it on your own.

When iPhone screen turns white due to software errors

The most common reason a white screen comes on is a software error. If the display turns white for this very reason, then you’re in luck. Fixing your phone is easy, and you don’t need to take it to a service center. To get rid of the “glitch” when the iPhone screen turns white due to errors in applications or iOS, it is enough to adhere to the following algorithm:

  • hold down the Home button and the shutdown button
  • hold the buttons until the device reboots
  • make sure the iPhone is working

If the reboot does not occur, you can try another option. hold down Home, then press the volume up and off keys. If the problem was in the software, the iPhone should work fine. However, it is possible that the white display will reappear after some time, because software errors rarely disappear on their own. The options for getting out of the situation are a new firmware or the delivery of the gadget under warranty. In Apple branded services, such problem devices are easily repaired or replaced with new ones.

If the screen is white due to digitizer failure

The third option, why the screen is white when you turn on the iPhone, is the failure of the touch panel. It is easy to distinguish it from the previous one: if the LCD breaks down, the phone will receive calls even if you see only a white screen in front of you. To answer a call, you just need to swipe across the screen where the call acceptance slider should be. If you cannot answer, then the reason is precisely the inoperative touch panel (digitizer). What to do next:

The Ultimate iOS 14 Homescreen Setup Guide!

  • open the gadget as described above
  • take off the old digitizer
  • install new
  • after assembling the white screen should not appear

It should be noted that you can independently repair a smartphone even if it is under warranty. Neither the digitizer nor the LCD panel is factory sealed, so you will not violate your warranty claims.

When to contact a specialist

The most problematic option is mechanical damage to the device. If the gadget falls and you have a white screen and a black apple, or vice versa. the iPhone’s apple turns white, and the screen itself becomes black (depending on the color of the case), it is rather difficult to identify the cause of the breakdown without special diagnostics. often than not, if you drop your iPhone, the screen turns white if the ribbon cable comes off. However, the fall of the device can lead to other unpleasant consequences that will entail the need to repair the iPhone:

  • breakdown of the touchscreen
  • breakage of the glass of the iPhone screen (a strip or “cobweb” appeared on the display)
  • disconnecting the loop from the touchscreen

If the screen glows white due to mechanical failure, it is best to contact an Apple Service Center. However, diagnostics and repairs can take a long time. If you are not ready to spend long weeks without your gadget, it is better to turn to private certified Yuda specialists. If you dropped your iPhone, leave a request on youdo.com and experienced performers will respond to it, ready to resolve the issue of the white monitor of the gadget in a short time. They only use original parts, so after troubleshooting, you can forget about the white screen on your iPhone.

If you have already encountered such a nuisance as a white screen on the iPhone, and your attempts to fix the malfunction yourself were unsuccessful, or the unpleasant situation repeats, it is best to immediately contact the specialists.

Method 1. Reboot

If it is a software glitch, then you need to try restarting your phone. To do this, use the lock button located on the side panel.

How to twitch the screen on iOS 12

Method 2. Enter recovery mode

If after rebooting the screen still jerks on iOS 12, then you can try to solve the problem using recovery mode.

Connect your iPhone to your computer with a USB cable.

Open iTunes (always use the latest version of the program).

Press and hold the side power button and the HOME button at the same time (on iPhone 7/7 Plus and above, the volume down key).

Release the power button, but hold the other button for another 15 seconds.

iTunes will detect iPhone in recovery mode. The smartphone screen must remain off. Now select the function to restore iPhone.

Method 3. iPhone screen flickers fix space bar via Tenorshare ReiBoot

If the second method seems difficult for you, the easiest way is to use the Tenorshare ReiBoot program.

Download Tenorshare ReiBoot software on your computer, then install and run it.

Next, you need to connect your iPhone to this computer. use a USB cable for this. After connecting, the utility will recognize your device and will be ready to work.

Use the active “Enter Recovery Mode” button to launch it on iPhone. This will be signaled to you by the iTunes logo and USB on the display.

After that, click on the active button “Exit recovery mode”. Wait for the device to restart and check if the screen is still shaking on iPhone.

Note that Tenorshare ReiBoot also has a third button, “Resolve All iOS Freezes”. You can click it and then find your problem in the list and you will be offered a solution.

Why is the screen twitching on iPhone?

Some users describe the problem in great detail as follows: “The screen is twitching on the iPhone, it is simply impossible to work on the phone, what could be the matter?”.

In fact, there can be several reasons why the screen on the iPhone is constantly flickering or twitching. The first thing that comes to mind is a hardware failure. You may have accidentally dropped your phone or got water or something similar. Then, most likely, the incorrect operation of the screen is connected precisely with a fall or other breakdown. The second reason is a software failure or software error. There are several ways to solve this problem.

Screen twitches and screen flickering on iPhone with iOS 12

The first global update in the form of iOS 12 brought a number of problems for Apple device users. There have been many complaints on the forums about the iPhone and iPad. Especially often, mobile users wrote about the screen twitching on the iPhone on iOS 12. What caused the display flickering on the iPhone was a mystery to everyone. But you can try to fix this problem yourself.

4 Method. Update

There are several ways to update the iPhone to new software: OTA (over the air. through the Settings. General. Software update application). You can also simply connect the device to a PC and iTunes itself will offer to update the device. Or via DFU mode, as described below.

READ  Where is the serial number on iPhone

Connect your iPhone to PC with a USB cable.

Press and hold the side power button and the HOME button at the same time (on iPhone 7/7 Plus and above, the volume down key).

Release the power button, but hold the other button for another 15 seconds.

iTunes will detect iPhone in recovery mode. The smartphone screen must remain off. Now select the iPhone update function.

Control

Use the option again: turn it on according to the same algorithm, that is, find “Settings”, select “Magnifier”. Then drag the slider to the other side, to the active position.

The option is controlled using a switch. Press the “Home” key located in the middle three times. Move the slider to the right (increase the size of the image) or to the left (decrease).

Somehow a couple of days ago, wiping the iPhone screen from fingerprints, I discovered that the image on the phone display for some reason increased. The first thing that came to mind was to restart iOS, but after loading nothing changed and the lock desktop was also increased. I didn’t know what to do and was already thinking about doing a factory reset. But this is an extreme step! It was decided to look for the answer on the Internet. to ask the advice of the omniscient Google.

The answer was not long in coming and the solution was found within a few minutes. Looking ahead, I would like to clarify that the zoom effect may not be displayed for all iPhone owners, but only for those who have enabled the Zoom function in the accessibility settings.

How to turn off screen magnification on iPhone

Software glitch or iPhone enlarged screen?

Yes, sometimes it happens. the iPhone lock screen has taken and increased! The screen with icons and any running application can also enlarge. Therefore, today we will analyze. what to do if the iPhone screen has increased in size. Before we start, I would like to thank the reader Natalia for the comment, which became the topic of this short instruction.

So, if you see an enlarged image on the iPhone phone screen, it can be application icons or just individual elements of the iOS operating system, then you should not run to a service workshop or try to flash the phone. Just do the following:

  • With three fingers, tap three times on the iPhone screen. The screen will shrink to normal size. If, when making the third tap, you lift your fingers off the screen too quickly, the screen will not shrink, but a menu will appear where you can press the button. Reduce or drag the slider to the left, thus, the display size is normalized.
  • If after repeated attempts to touch the 3rd, nothing happened (the iPhone screen is still enlarged), then restart the iPhone and perform the 1st step again.

Now we see that enlarging the icons to fill the entire screen of the iPhone phone is not a glitch, but only one of the functions of the iOS firmware, which is called Magnification, and allows, if necessary, to enlarge any part of the screen and examine it up close, which can be useful for people with disabilities.

I will step a little away from the topic and offer a couple of useful instructions for beginners:

When the iPhone screen is in magnification mode, you can move around the screen with a 3-finger gesture. touch with three fingers and, without releasing them from the screen, move left, right, up or down, thus viewing any part of the screen without leaving magnification mode.

If you decide to completely disable (or, on the contrary, enable) this function, then this is done in the accessibility settings. The zoom mode has additional features. filter, controller, etc. if you cannot deal with them yourself, write in the comments. Well, tomorrow I’ll tell you how you can use the little-known iPhone Screen Enlargement feature for additional protection. Good luck to all!

The magnifying glass mode on iPhone allows you to see fine details in documents, applications, and pictures. The magnifying glass function is available in newer versions of operating systems. It also helps people with poor eyesight, who are physically unable to see small details. It is clear that the mode is relevant for many users. But what if someone accidentally installed the screen magnification on the iPhone and is no longer needed. Users are wondering: how to remove the magnifier on the iPhone. In fact, the procedure takes several minutes, if you know the exact algorithm of actions.

Deactivating the magnifier

The user can turn off the screen magnification through the “Settings” of the phone. The lens on the display will not completely disappear from the device, but will be hidden. The icons will be displayed correctly, in the usual size, without accidental transitions to the enlarged mode, if the user suddenly clicks the corresponding icon. We remove the magnifying glass from the phone screen in this way:

  • open “Settings” (in the form of a gray gear on the desktop);
  • further. item “Basic”;
  • go to the “Universal Access” category;
  • click on the “Magnifier” icon;
  • turn off by moving the slider to the position when the main strip is gray (bright green: the magnifying glass mode is active).

So, what do you need to do to make the screen on the iPhone the same, and not be enlarged?

Tap 2 times simultaneously with three fingers on the iPhone display and the image is immediately zoomed out. And if instead of two touches you make three, then the zoom menu will appear on the iPhone screen, pressing the Reduce the image on the display button will become normal. You can also do this by dragging the increase / decrease slider to the left, which is located at the very bottom of the menu.

As it turned out in the end, the screen enlargement is not a software glitch at all, but one of the phone’s functions, which is designed for people with disabilities. To use or disable it, go to the Settings app and select General → Accessibility → Zoom and set or remove the slider from the zoom function

If for some reason you cannot remove the screen magnification on the iPhone, then use a computer with iTunes installed.

Step 1 Connect your iOS device to your computer

Step 2 Launch iTunes and select your gadget

Step 3 On the Settings menu, click the Configure Accessibility button.

Step 4 Check the Do not use checkbox and click OK

Share the article with your friends by posting a link on your page at. Google, or. and also subscribe to our pages in social networks and read even more useful articles

How to reduce iPhone screensaver photos?

Press the Photos button and select the frame of interest from your albums on your phone. After uploading a photo, swipe right to access the app’s editing tools menu. The application will prompt you to change the image resolution in percent or pixels.

How to shrink the screen on iPhone 11?

Go to Settings → Accessibility → Touch and enable the Easy access option. 2. Pull down (swipe down) the bar (gesture bar) at the bottom of the screen in any open application or under the Dock on the home screen.

How to reduce the weight of a photo?

  • Open the photo with Paint;
  • Select the “Stretch / Shear” tool located in the “Picture” tab;
  • In the “Horizontal” column it is necessary to change the value downward, vertically put the value similar to the first one;
  • Click on OK and save the file.

How to reduce the size of icons on Samsung?

Change the number of icons on the desktop and application screen

  • In the “Settings” menu. “Display” go to the item “Home screen”.
  • Find the “Main Screen Grid” menu and change the size. the number of icons vertically and horizontally.
  • In the “Application screen grid” menu, change the number of icons on the application screen.

How to make icons smaller?

How to enlarge (reduce) icons on the desktop in Windows 7. There are two ways to enlarge (reduce) icons in Windows 7: 1 Method. Click on an empty space on the desktop (or on the shortcut on the desktop), press and hold the “Ctrl” key and use the mouse wheel to adjust the size of the icons to your convenience.

What to do if the screen on iPhone is enlarged?

  • With three fingers, tap three times on the iPhone screen. The screen will shrink to normal size.
  • If after repeated attempts to touch the 3rd, nothing happened (the iPhone screen is still enlarged), then restart the iPhone and perform the 1st step again.

How to rotate the screen on iPhone 11?

Rotate the screen on an iPhone or iPod touch using the Home button

  • Swipe up from the bottom of the screen to open Control Center.
  • Click the Portrait Lock button. to make sure it is disabled.
  • Flip iPhone or iPod touch on its side.

How to remove screen magnification?

  • Open device settings.
  • Click Special. features Enlarge the image on the screen.
  • Select Triple-click Zoom or Press Zoom. If you don’t see these options, you probably have an older version of Android installed.

How to take a screenshot on iPhone 11?

  • Press the side button and the volume up button at the same time.
  • Release both buttons quickly.
  • After taking a snapshot, a thumbnail will temporarily appear in the lower left corner of the screen. To view the photo, tap on a thumbnail, and swipe left to remove the thumbnail from the screen.

How to turn off the blind feature on iPhone?

  • We go into the settings. It works the same way on iPhone and iPad;
  • We click on the main ones;
  • Select the section “Universal Access”;
  • Item “Magnifier”;
  • Click on the small switch to turn it off;

How to shrink the screen on iPhone 11?

Go to Settings → Accessibility → Touch and enable the Easy access option. 2. Pull down (swipe down) the bar (gesture bar) at the bottom of the screen in any open application or under the Dock on the home screen.

How to hide the big screen on iPhone?

Enlarged home screen icons on iPhone, iPad, or iPod touch

  • If the enlarged icons on the Home screen make it impossible to access the Settings menu, zoom out.
  • To turn off Zoom, go to Settings Accessibility Zoom and press the switch.

What to do if the screen on iPhone is enlarged?

  • With three fingers, tap three times on the iPhone screen. The screen will shrink to normal size.
  • If after repeated attempts to touch the 3rd, nothing happened (the iPhone screen is still enlarged), then restart the iPhone and perform the 1st step again.

Why iphone lights up red screen and won’t turn on

To me, the red screen in iPhone 5s, iPhone 5, iPhone 5s, iPhone 7 reminds me of the communist regime, which destroyed millions of innocent people, but I hope that your smartphone will bypass this prospect.

Usually the red screen lights up when you turn it on, and most often, judging by experience, this happens with the iphone 5s. less often in the iphone 5 and iphone 6.

In case the screen turns red and the phone does not turn on, the first thing is recommended to do it forcibly restart.

To do this, you need to simultaneously press the “Home” buttons at home “Sleep / Wake up” and hold for ten to fifteen seconds.

Only this operation solves the problem for a short time, which means that the “red screen” can repeat itself. What to do? Look below.

NOTE: there is also an excellent application that will check the iPhone screen and, if errors are found, provide instructions on how to fix them. I have already described it here.

Potential causes of a red screen on iPhone

Most likely, aceatsa software error appeared caused by corrupted backup archive. You can try to repair the process (recovery) with iTunes aceatsa to solve the problem.

The second reason: a hardware error in one or more iPhone components. In this case, you need to contact Apple service.

I’ve been using iPhone since the first generation. The iPhone X is my seventh phone from Apple. Through all these generations, I sometimes had to deal with defects.

My red screen drama happened unexpectedly on Sunday. I used my new phone quite extensively that day.

Late in the evening, I had a rather lengthy two-hour conversation, after which the battery was depleted.

I plugged my phone into a charger and did other things. It took 15-20 minutes when I realized that something was wrong.

The apple was still burning on the screen, and after 2-3 seconds I saw the “red screen of death” for the first time.

The first thing I did was reset the phone, but the red screen appeared again, after which I rebooted and again and this cycle was repeated.

Attempts to restore the software in recovery mode and even in DFU did not help.

At the same time, it was not possible to completely restore the software. Each time, this process was interrupted by a red screen, followed by a reset.

The problem appears to have occurred after updating to a more recent iOS. I fixed this by installing the penultimate version, but you may have a completely different reason. One solution is an iOS bug fixer.

Program to fix red screen in iPhone

The program is called ReiBoot. Although of course there is no 100 percent guarantee that she will fix everything, I recommend trying her

READ  How to Recover Deleted Photos on iPhone Phone

Click here to download. The program has been tested and it will not delete anything from your files. you can be sure.

To use it, you need a laptop / computer and a connecting cable (from the charger).

If a red screen appears after a fall or impact, then of course you should not install the program.

Other solutions for iPhone red screen issues

After the impact, the connection of the connectors could be disrupted. Replacing the loop or connecting it will resolve the issue in this case.

If water gets in, depending on the oxidation state, the hardware may need to be replaced. from the trivial power connector to the very heart of the gadget. the iPhone processor.

If you use Chinese chargers, the u2 chip or NAND controller may need to be replaced due to unstable voltage.

Using unlicensed apps or jailbreaking can also cause a red screen and can be resolved by a full factory reset or flashing from an iTunes backup.

If the iPhone did not fall to the floor after water (safe and sound) and is still under warranty, then it is better to take it to an Apple service point without delay, where it will be changed under warranty.

IPhone Red Screen of Death and Error 4013

error 4013 can mean a malfunction of the Wi-Fi module, accelerometer, battery connector, problems with sensors

Also, error 4013 may be due to the use of a Chinese cable when updating via iTunes.

Apple employees cut update time to a minimum, so Chinese substitutes can’t transmit signal.

The last option is a flashing. You can do it yourself. There is nothing complicated. Here is the instruction. Success.

Unlock iPhone Screen Through Browser

How to unlock your iPhone screen if you haven’t connected it to your computer and don’t have it paired with iTunes?

There is a solution, only you must have an Apple ID, which is the email address and password that you entered into iCloud on your phone.

To get started, log in to iCloud.com using the email address and password you used when you first started.

After logging in to the site, we will find the “Learn” icon. it will be in the lower right corner of the iCloud.com screen.

After opening it, you will need to enter the password again, and then your phone will be displayed on the map.

Now click the All Devices button at the top, or if there is only one device, the device name is displayed at the top of the screen.

After selecting a phone, a window with parameters will appear in the upper right corner. Click here for the solution titled “Dream iPhone”.

As with restarting iTunes, the data from the phone will be deleted and the lock code will be deleted.

Unlock iPhone Screen Through Safe Mode

The last solution is to put your phone into safe mode. recovery mode. This method will work if you haven’t added or disabled an iCloud account on your iPhone and can’t use iCloud.com right now.

In this case, turn on iTunes on the computer, and then connect the iPhone to the computer using a USB cable.

Then press the On / Off button and the Home button at the same time. Wait until the phone restarts. The recovery mode screen appears.

Now release the buttons. iTunes will display a message: “The iPhone has a problem that needs to be updated or reproduced.”.

If you want to restore your phone to its original settings and remove the screen lock code, click the “Restore” button and wait until all settings of your phone or tablet are deleted.

After your phone restarts, you can create a new iCloud account to connect your device to. The phone lock code will also not be available.

3 Proven Ways To Unlock iPhone Screen If Forgot Password

“I forgot the screen lock code for iphone 4s, iphone 6, iphone 4, iphone 5s”. this is often encountered among the problems of those who have an Apple phone.

What to do when the lock code flew out of our head? If you do not remember the password or the device is locked. there are several easy ways to unlock, although it has the best security system in mobile phones.

This became publicly known when FBI agents could not get to the data on the iPhone 5.

All the confusion came from a rather trivial iOS feature. After entering the security code ten times, the system will automatically delete the entire contents of the device.

This is because there is no physical ability to read data from a locked iPhone.

If we are not FBI agents who have a huge budget and can contact a mysterious company that can bypass Apple’s security, then we must do our business differently.

Some time ago in my guide I showed how to unlock any Android. today I want to focus on another solution. how to unlock iPhone 5, iPhone 6, iPhone 7, iPhone 4, iPhone 4s, iPhone 6s, iPhone 5c, iPhone 10, iPhone 5s?

It can be restored in several ways. official and less official.

This guide applies to the iPhone lock screen, but does not cover how to unlock if the screen is broken or the screen is not working.

To unblock iCloud, you need to go to another entry. there I prepared 8 great tools. the link is in the last section of this post.

Unlock iPhone Screen via iTunes

If you’ve used a smartphone before and connected it to iTunes on your computer, it’s a simple matter.

To do this, we connect the locked phone using a computer cable and turn on iTunes.

After the program detects your device, click the icon (top left) and select “Restore iPhone”.

Then you have to wait. All data on the phone will be erased and after restarting you will have to sign in again using your iCloud account (Apple ID).

The iPhone screen lock password will disappear and you can set it again by going to your phone settings.

In this case, you should not restore the backup, as it will restore all previous settings, including the old phone or tablet screen lock code.

What to do if unlocking the iPhone with the methods above did not work

If none of the above methods worked for your case, you still have (at least) 2 solutions.

Solution. check out this post, from which you can find out 8 ways to bypass iCloud.

Second solution. describe your problem in detail in the comment in this text.

If possible, throw screenshots. it will be easier for me to help. I will try to answer your request as soon as possible. Success.

Does not turn off during talk mode on other models

If the proximity sensor is not working correctly on the iPhone XR, X, XS, 8, 8 Plus, you should make sure that there are no updates. For new iPhones, unlike the same fives, this is an important factor in the normal functioning of the entire filling.

Note! Due to recent user complaints about errors when updating gadgets to IOS 13, before starting the procedure, you should activate iCloud backup.

How to reset iPhone settings

Screen does not turn off when iPhone is talking automatically

When the first touch-sensitive phones were developed, manufacturers saw one design feature. when you put the smartphone to your ear, a variety of functions are activated. The problem was solved simply, now a special sensor turns off the display. But from time to time, iPhone owners do not lock the screen during a conversation, which, of course, causes a lot of inconvenience. Why and what to do with it. below.

What to do if iPhone does not lock screen when talking

If all of the above tips did not lead to success, and the screen does not go blank on the iPhone during a conversation until now, then all that remains is to contact the service center. The great news is that specialists will replace the sensor itself without any problems if there is a breakdown. Or return the cable to its place if it disconnected during the fall.

If the user purchased an iPhone from an authorized retailer within a year or two, he is entitled to free service if the cause of the sensor breakdown falls within the terms of the warranty case.

According to the law, in Russia the warranty for iPhones is 2 years

The screen does not turn off when the iPhone is talking. what to do

The first step is to check how the sensor works:

  • Call another subscriber.
  • Remove iPhone from ear.
  • Close the sensor with your finger.

If the screen does not go out, then the problem is really in the sensor. Here it is worth remembering another possible reason. incorrect auto-lock settings. Usually, the user does not need to look there, but if this is the work of malware, then it is worth downloading an antivirus.

To understand that the iPhone does not turn off during a call due to settings, you need to:

  • Go to settings menu.
  • Select the section “Basic”.
  • Click on the “Autoblock” section.

Activate the slider if it is not enabled for some reason. After that, it is additionally worth rebooting and trying again to check the screen lock during a call.

Why iPhone screen won’t turn off during talk mode

If during a call the display reacts to touching it with your face or ear, then the gadget has a hardware or software malfunction with the proximity sensor. It is he who is responsible for turning off the screen. It can still be seen at a certain angle of illumination next to the earpiece.

Proximity sensor is next to the front camera and speaker

Reasons why iPhone screen does not lock during a call? some:

  • Proximity sensor covered with opaque glass, cover, sticker, fingers.
  • Moisture has entered and the sensor contacts are oxidized.
  • The software installation has failed.
  • The owner uses a speakerphone to hear better (in this mode, the screen should not turn off).
  • The screen is damaged after a fall, and the crack prevents the sensor from recognizing the proximity.
  • Dirt stuck to the lens.
  • Low battery.
  • The user has removed the anti-reflective coating that was installed by the manufacturer.
  • The repair service installed a non-original screen.
  • After the fall, the contact came off.

Also, the problem is often encountered with devices that were sent for repair to replace the screen. Most likely, the master simply forgot to connect it or did it incorrectly.

Note! Proximity sensor malfunction also prevents Siri from using voice assistant.

You can check the operation of the sensor during a call by creating an obstacle in front of its lens at a distance of a couple of centimeters

The screen does not go out when talking iPhone 5s

Focusing on the above reasons why the screen does not go out when the iPhone is talking, it remains only to sort out the options, taking into account the most frequent calls of the owners.

As for the 5th generation iPhones, including the S and SE, most often the problem lies in the cases. Today you can find absolutely any “exclusive” cover for the top five. Often it is he who imposes on the above-described sensor, and he stops turning off the screen during a call.

Also, in the case of this model, it is worth checking the protective glass (if any). In view of the old age of the gadget, the market is flooded with accessories that were produced without observing Apple’s standards.

When installing a protective glass on the iPhone screen, you need to make sure that it will not cover the sensor

The screen does not go out when talking iPhone 7

Starting with iPhone 7 and 7 Plus, the user can diagnose sensor failure on their own:

  • Go to the settings menu.
  • To the “System” section.
  • Item “About phone”.
  • Followed by “Support”.
  • Click “Agree”, “Agree” or “Accept” (means that the user has accepted the privacy policy).
  • Scroll to the end of the new menu and select “Test” or “Test”.
  • Click on “Start”.

After that, following the prompts of the system, make sure that the sensor is faulty.

If buttons are pressed while talking on the iPhone, how to fix the situation is worth mentioning the forced restart. On iPhone 7, it runs like this:

  • Hold down the power off button.
  • Simultaneously hold down the “volume” “-“.
  • Wait for the characteristic vibration and the appearance of the Apple logo on the screen.

But in truth, this method rarely helps.

Enabling, disabling and self-configuring the proximity sensor on iPhone

Considering that the module is quite sensitive, Apple engineers left several ways to disable the proximity sensor on the iPhone. There are three options:

  • Use the Smart Screen Off application (available in the App Store), which, although it does not turn off the sensor, will help to set it up if everything is not hopeless.
  • Bring up the call menu and enter “# # #”. This code programs IOS to turn off the sensor.
  • And the last, most radical option, to remove the module from the filling.

The last two options should be used if the sensor is “buggy” and blocks the screen when it is not needed.

When iPhone is held to your ear, the screen should go blank. To do this, a special sensor is sewn near the front camera, which should block the display from accidental clicks during a call. If this does not happen, the user should use a forced reboot, install updates and check if dirt or an accessory is blocking the lens of the module.

READ  How to jailbreak iPhone

What to do when your iPhone is on but the screen is black.

Even the highest quality smartphones fail periodically. any user can suddenly face such a problem as a black screen on the iPhone. You have rebooted your iPhone, connected it to the charger, and your iPhone screen is still black, take your time to get upset. Perhaps, restoring the device is not as difficult as it seems at first glance. Various breakdowns can lead to the appearance of a black screen, which in some cases can be repaired by yourself.

In this article, we’ll explain why your iPhone screen won’t turn on and what you can do to fix it.

When iPhone won’t turn on due to full battery drain

Battery is completely drained. Another reason iPhone gets dark screen is when the battery is completely drained. If you used the gadget in the cold, and then found that it went out and does not respond to attempts to turn it on, follow the following algorithm:

  • warm the device in your hands
  • connect the device to the charger
  • wait 15 minutes

After that, the download should start automatically. If this does not happen, check if the charging is working properly. It might be worth replacing it.

Black screen on iPhone

Black iPhone screen due to mechanical damage? Let’s take a look inside.

A quick look at the inside of your iPhone will help you understand why your screen is black. There are two hardware we will talk about: your iPhone’s display and the logic board.

Logic board. these are the brains of your iPhone, and every part of it connects to it. The display shows the images you see and it is the logic board that tells you what to display.

Your iPhone’s entire display is removable, but it’s much more complex than you might think! There are 4 main components under the display:

LCD screen displaying the images you see on your iPhone;

a digitizer that is part of the display that processes touch. It digitizes your finger, which means it turns the touch of your finger into digital language that your iPhone can understand;

Each component of your iPhone display has a separate connector that plugs into the logic board. This is why you can swipe your finger across the screen even though the screen is black. Digitizer works, but LCD doesn’t work.

Basically, your iPhone screen turns black because the cable that connects the LCD to the logic board is disconnected. This cable is called the display data connector. When the display data connector is displaced from the logic board, your screen becomes inoperable.

There are other options for the reason for the black screen of the iPhone, for example, when the LCD itself is already damaged and then it does not matter if the display is connected to the logic board or not. it is broken and needs iPhone screen (display) replacement

Typical signs of such a breakdown:

iPhone touchscreen turned black during bootup;

when restarting the smartphone, the problem persists, the screen is still black;

you cannot receive a call, the screen does not respond to taps;

black screen on iPhone appears when entering the camera app;

stripes appear on the dark screen, but the phone continues to receive calls

screen, iphone, increased

The first thing to do if your iPhone has a black screen is to restart your device. If that doesn’t work, the problem is more serious.

Typical reasons why the iPhone screen won’t turn on:

  • If the phone is dropped on a hard surface or other mechanical damage that may damage the display, the flex cable may come off.
  • Full discharge of the smartphone, which can lead to the fact that the “apple” device stops functioning. vibrate, transmit signals, show an image of an apple, etc.
  • There is a bug in a specific application. In this case, the display darkens when you enter this application.
  • A failure occurred during the download phase of updates. At the same time, the apple icon is constantly on the screen and nothing else happens.

Screen freezes when software crashes, what to do?

A black screen is usually caused by a hardware issue with your iPhone, so it is usually not a quick fix. The first thing to try to solve this problem. this apply a hard reboot

To perform a hard reset, press and hold the Power button and the Home button (round button below the display) at the same time for at least 10 seconds. Live until the Apple logo appears on the screen.

On iPhone 7 and 7 Plus, you need to do a hard reset by pressing and holding the Volume Down and Power buttons at the same time until the Apple logo appears.

On iPhone 8 and 8 Plus, X, you need to press and quickly release the Volume key, then press and quickly release the Volume button, hold down the Power button until the Apple logo appears.

If the Apple logo appears on the screen, chances are there is no problem with your iPhone. it was a software glitch. Read on for what to do if the Apple logo doesn’t appear on the screen.

What to do if the sensor is not working on iPhone

If the iPhone owner notices that the image on the phone’s display suddenly begins to display with interference, the sensor stops responding to touch, and tactile commands are sent and executed spontaneously, he usually thinks that the problem will be solved by replacing the display module. However, even after replacing the display, all these problems remain. How to solve them?

On iPhone 6 Plus, the sensor often does not work correctly

How to fix iPhone sensor problem

You can get rid of these inconveniences by replacing the iPhone touchscreen controller. At home, this will definitely not work. replacing the microcircuit located on the motherboard is a complex procedure that requires experience and skills. Therefore, we turned to the Apple Pro service center, which showed us the iPhone 6 Plus repair.

Why iPhone screen glitches

Sensor glitches, interference on the iPhone screen and other similar symptoms are typical for the iPhone touchscreen controller not working correctly. These symptoms include:

  • The sensor works every other time
  • Stripes appear on the screen
  • The phone lives “its own life”, the commands are executed independently

This issue is common on iPhone 5, iPhone 5s, iPhone 6, and iPhone 6 Plus. Before the iPhone 6s, these controllers were located on the motherboard: only then Apple began to place them on the display part.

Such stripes on the iPhone screen may indicate that the touchscreen controller is not working properly.

Why is it failing? Most often this happens due to the penetration of moisture into the case or mechanical impact on the phone. a small fall from the sofa is enough. The motherboard has a high density of BGA chips, so any physical contact can lead to disruption of their work. Falling or getting moisture into the phone can cause a violation of soldering, breakage of contact tracks and even damage to the microcircuit itself.

However, it happens that the problem arises after an unscrupulous repair. It is very easy to damage (overheat) the components of the iPhone board if you work carelessly. In any case, a qualified diagnosis is required to identify the exact cause.

Is there a problem in the controller or display? Only a specialist will understand

Touchscreen controller repair process

Since the touch controller in the iPhone 6 Plus is located on the inside of the motherboard, you need to almost completely disassemble the phone to access it. The battery and all cables are disconnected.

The display module is removed, all loops are disconnected

For safety (and convenience), the motherboard is removed from the iPhone and placed in a dedicated holding device.

Motherboard removed from iPhone

The engineer uses a hot air station and heating to remove the old controller. Since all the components on the motherboard are densely located (for example, on the back side there is a processor), the temperature regimes are observed very strictly. Overheating can cause problems with other microcircuits, which will require additional repair.

System board without touchscreen controller

The specialist cleans the contact pads and prepares the board for the installation of a new microcircuit.

Often the problem lies in the breakage of the contact tracks on the motherboard. Therefore, after dismantling the old touch controller microcircuit, the engineer begins to restore the breaks on the board. For recovery, he uses a circuit on a computer and special software.

Microcircuit in place, tests can be carried out

After repair, a seal is installed on the components. it is damaged by physical influences from the outside

Breakdown reasons

The reasons are simple to the point of banality, remember, has this happened with the iphone 5 in the foreseeable past? If yes, then this article is for you.

  • iPhone fell on a hard surface. display cables could fly out of the connectors.
  • Pressing firmly on the display module
  • The device fell under water. water ingress and short circuiting of vital circuits.
  • Strong heating of the gadget. damage to microcircuits
  • Software error (iOs)
  • Poor repair grief by craftsmen (tear off your hands)

Frequent problems

First you need to understand what happened to the phone, we will analyze the main causes of breakdowns before proceeding to solve the problem. There can be many reasons why the screen on the iPhone has gone out.

The display does not turn on, the phone is working

A common iPhone glitch, when the display does not turn on, and all phone functions work, a call goes through, Siri answers requests, etc. Sometimes you can see that the backlight is on, but the iphone 5s screen does not work. just black, no image, even the sensor reacts to pressing.

How to fix when the screen went out on iphone 6 and the call does not turn on, we will analyze in the following chapters. For now, you need to find out why this occurs in order to understand what kind of situation you have.

Display bar

The stripe on the iPhone screen can confuse any user, even the savvy and capable, without instructions, to hard reset the device on their own. You should not be upset, perhaps it will not come to an expensive repair. What to do when the iPhone does not show the screen, we will consider in the next chapter, while we dwell on the symptoms.

  • Stripes can be single or across the entire sensor. loop or connector problem
  • Colored or gray and black. cable or connector problem
  • Smudges appearing on the monitor. in this case, only replacement with a new part.

The stripe on the iPhone screen is a reason to contact the service center. Or, if the iPhone does not work properly, open it yourself and check the integrity of the monitor and camera cables. You can carefully disconnect all the conductors and reconnect them, sometimes this helps to remove colored stripes from the screen.

What to do if iPhone screen is streaking, yellow spots appear, or just doesn’t work?

A yellow spot appeared on the screen

A rare kind of problem with the iphone display, when yellow spots appear on it, there may be several or one of them. The iphone display is a fragile thing, just put it on a hard surface, and difficulties immediately arise in work.

Before proceeding, you need to clarify, the yellow spot on the iphone screen is glue. If they appear on a new iphone 5, 6, 7, 8, you should contact the warranty department, you should change the device without any questions. Or you can wait 2-3 months, before handling, the glue should dry and the problem will go away by itself.

  • If yellow spots appeared while using the device, for example, a couple of years after purchase, then you should think about replacing the entire screen.
  • The iPhone battery failed and began to swell, literally, pressing the screen from the inside.
  • Recent renovation, apparently not done in the best way.

Display is on, but partially or completely unresponsive

The reasons are the same as in the case when the screen went out on the iPhone, read about them in the previous chapter. It is necessary to clarify the symptoms of a non-working touchscreen in order to correctly resolve the issue with it.

In this case, the problem is precisely with the screen sensor, which suddenly stopped working in whole or in part. This can occur due to shock or other mechanical damage to the matrix. In this case, the glass of the phone will remain intact, without cracks, but the system will not be able to work as it should, for example:

  • iPhone is not responding to pressing
  • Responds to user actions for a very long time
  • On 7, 5, 6, part of the sensor does not work
  • iPhone lives its own life, not paying attention to pressing
HSIDG.COM 2021