Sony vaio laptop entering BIOS

How to enter BIOS on a Sony Vaio laptop (Sony Vaio)

Sony is headquartered in Tokyo, a multinational corporation. For happy owners of a Sony Vaio laptop, it sometimes becomes difficult to enable BIOS (OS subroutine) on sony. Let’s consider several options on how to do this.

F2 button

Most Sony Vaio models include a set of firmware keys F2, DELETE, F3. A combination of F2DEL, F3DEL is possible. In new Sony models, Vayo may be responsible for opening the BIOS by a combination of keys F8 and F12.

  • we start the laptop;
  • press F2DEL one by one;
  • do it quickly;
  • login takes a couple of seconds.

Attention! Only one F2 key is always responsible for opening the system firmware, the combination is the entry code. For it, we press the required key periodically until the subroutine opens. When a combination is used, you should try to press not two “positions”, but alternately, hold down one, and press the other with a short time interval.

EscF2 combination

The developers explain the variety of options for opening BSVV (a set of firmware) by installing different motherboards. For this reason, there is no single sign-on to open the device subsystem, it depends on the model number and year of manufacture Sony Vayo.

  • turn on the laptop;
  • when the inscription “vaio” appears on the monitor, press ESCF2;
  • after frequent pressing, the OS subsystem (operating system) settings tab will be displayed.

If the BIOS does not open, and the system continues to boot Windows, you need to “reboot” the device. To do this, we often and periodically press the ESCF2 buttons.

How to login

You can enter the sony vaio BIOS in several ways, depending on the device model:

  • Using the dedicated Assist key.
  • By pressing F2.
  • You can get into the BIOS (BSVV, firmware set) by pressing EscF2.
  • Start BIOS by typing F2F3 Delete.

Attention! Before pressing the selected combination, the device must be turned off. Which way to open BSVV depends on the year of manufacture of the laptop.

If the laptop was purchased officially, then look at the documentation for it. This can be done on the official website. It is necessary to use a search engine and register the model number there. Often helps to determine the desired combination of prompts when starting the device “Please use (required button) to enter setup”.

sony, vaio, laptop, entering, bios

With saving parameters

Many advanced users reinstall Windows OS on their own when:

  • it does not work due to a technical error;
  • there were violations in the event of a virus attack.
  • we go in one of the described ways;
  • standard settings are opened, where: serial number, BIOS version, etc.;
  • go to the “Boot” page;
  • set the required parameters of the startup priority, a laptop from a USB flash drive, from a disk;
  • save, press F10;
  • confirm saving by clicking “Yes”;
  • press ENTER.

How to get out

The user enters the BIOS usually to set the priority of the system actions. This must be done when reinstalling the OS (operating system). After obtaining the necessary parameters, you need to exit the system settings window.

The procedure for using the Assist button to enter:

  • turn on the laptop;
  • press Assist;
  • we get to the menu;
  • press F2, the BIOS window opens;
  • select actions: “start from disk / from USB device”;
  • exit with saving (or without) settings, ENTER.

Dedicated Assist button

You can enter the BIOS on a sony vaio laptop by pressing the Assist key. Users try proven and standard login methods using the F2 and DEL keys. The new models of this company differ from all the previous ones in the arrangement of buttons, a non-standard keyboard. The Assist key is designed to call a special menu “Rescue windows”.

Note! The Assist button should be used in the same way as everyone else. In other words, after starting the laptop, we press frequently and periodically, until the menu appears. It will appear on the monitor in a couple of seconds. Next, the user will be offered options for action.

  • press Assist;
  • the menu opens;
  • press F2;
  • we get to the subsystem settings window.

When the user has opened the BIOS, remember that to select actions, navigate through the settings using the keys: “←”, “”, “→”.

Sony VAIO laptop: how to enter BIOS in the standard way?

Unfortunately, many owners of devices of this lineup are somewhat perplexed about why their creators needed to complicate the lives of users.

The fact is that the standard combination in the form of the usual three-finger combination with pressing the Ctrl Alt Del keys does not work here. The user begins to rush about in panic, looking for at least some way to get to the primary system, up and down exploring his Sony VAIO Pro laptop. How to enter the BIOS in these particular models will be said a little later, but for now let’s dwell on the solution proposed for the outdated line of devices.

The BIOS is entered using the F2 or F3 keys. But the catch is that the time for pressing is quite limited, sometimes you have to press the same key several times or use both keys alternately.

In some models, a slightly different solution is used, partially similar to the previous one. In them, the problem of how to enter the Sony VAIO BIOS is solved using the F8 or F12 keys. Again, sometimes a single press does not work.

What to do if login is not possible?

But these were only the main methods used. But it often happens that none of them works. What to do in this case? Most experts advise you to read the technical documentation or use information about the installed motherboard, and then look for a solution to the problem precisely by modifying it.

You can get this information from Device Manager (devmgmt.msc) or from the complete system configuration description (msinfo32). The given shortcut commands are entered in the “Run” console, called by pressing the Win R keys together. After that, all that remains is to enter a search query and see exactly how you can enter the primary system.

To make a more accurate request, you can use the serial number of the motherboard or special identifiers DEV and VEN, which can be found in the properties of the motherboard controller in the “Device Manager” (for this, the information tab is used) or in the same system configuration.

How to enter BIOS Sony VAIO: a few basic methods

Although Sony Vaio notebooks are powerful modern computer devices, with Windows installed on them, they can also undergo software failures when it is necessary to apply some of the settings specified in the primary input / output system BIOS. This is where the problem of how to enter the BIOS of a Sony VAIO arises. As it turns out, this is not easy to do, since the solution used is sometimes radically different from the standard one.

Sony VAIO Pro: how to enter BIOS using an alternative method?

If you look at later modifications, they use a solution that an ordinary user, without a hint from the outside, perhaps would not have guessed.

In this case, the problem of how to enter the Sony VAIO BIOS is solved by pressing the special ASSIST key located directly on the keyboard panel at the top right. However, for some reason, the login mode is called VAIO Care (rescue mode), and not the direct user expected direct input.

First, a special menu appears, in which you need to select an option. And to gain access to the BIOS, you need to use the function key F2.

So, the entrance is made. Fortunately, in Sony VAIO laptops the BIOS and basic parameters of the computer system are configured using standard methods, and the menu names do not differ much from the generally accepted ones. In the same way, the changed settings are saved and exited (F10 and the letter “Y” to save the parameters).

As you can see from the above, the problem of how to enter the BIOS of a Sony VAIO, although it looks somewhat difficult at first, is nevertheless solved quite simply. It all comes down to clearly finding out which keys are used to enter each specific model. On the other hand, for every owner of such a laptop, if there is an ASSIST key on the panel, it should be quite obvious that it is possible to get into the settings of the primary system with its help, so experimenting with other options will be a waste of time. If, however, a different combination is used to enter, it is better to preview the user manual that comes with the kit in advance. Finally, if it is not there, you will have to dig around the Internet. In any case, a solution can be found. There would be a desire.

Actions when BIOS requests a password

Typically, the BIOS will ask for a password if it has been set beforehand. Then, entering the BIOS, the user must enter exactly this password.

Resetting your password on a laptop is much more difficult than on a regular computer. When using a laptop, make a decision based on the model you are using.

To reset the password on an ordinary PC, find a switch on the motherboard near the battery.

So, this article provided instructions on how to enter BIOS on a computer and laptop.

To do this, it is enough to have at hand a list of hotkey combinations that help you easily get into the BIOS.

Ways to log into this system on Windows 7

It is very easy to enter the BIOS on Windows 7. to do this, press the hotkey after the computer is turned off.

Take this action before restarting your computer. It is recommended to click on the hotkey before the user entered the system BIOS menu.

Often, an inscription in English appears on the user’s monitor screen, offering to enter the settings of a personal computer.

Motherboard designers often use the Delete key. Often the F2 key is used as hotkeys.

There are also some other key combinations to help enter the BIOS on computers running XP or Windows:

  • Escape;
  • F10;
  • Ctrl Alt Escape;
  • F1;
  • Ctrl Alt Ins;
  • F2;
  • Ctrl Alt.

Upon entering the BIOS, the user may see a blue or gray screen in front of him. Most often, the settings are arranged in several rows.

Since the description of all keys is only in English, those who do not know it well should use the English-Russian dictionary.

Entering BIOS through “Recovery” (for Windows 8 and 10)

Windows operating systems from version 8 and above have a system restore function. The procedure goes through a reboot of the computer, during which it becomes possible to enter the BIOS. Procedure:

  • On the panel (or in the Start menu, if available) open the Settings tab.
  • In the window that opens, select “Change computer settings”.
  • Go to the “Update and Recovery” tab.
  • Open the “Restore” item, options for actions will appear on the right. In the “Special Boot Options” section, there is a “Restart Now” button at the bottom. Clicking on it will cause the computer to restart, during which you can enter the BIOS in a regular way.

Login option through “System Restore” on Windows 8 and 10

ASUS Laptops

On ASUS laptops, the F2 key is usually responsible for entering the BIOS. On my K551LB with Windows 10 installed, I have very little time to call the BIOS. Disabling Fast Startup doesn’t help. Therefore, just start pressing F2 even before the loading screen appears. By the way, on the official ASUS website in the FAQ section, it is recommended to press and hold the F2 key until the BIOS screen appears. So feel free to use this instruction. the officials approve.

READ  How to enable WEB-camera on ASUS laptop

other methods

Considering the proposed options, you will notice that all of them (except for pressing a special direct entry button) initiate a computer restart, and do not directly enable the BIOS. Therefore, any variant of calling a computer restart can be considered an additional way to enter it.

Actions if the system boots immediately

The new version of the output system, as well as the eighth and tenth versions of Windows, support instant loading of the operating system.

This means entering the BIOS is much more difficult. Those who are faced with a similar situation should restart Windows while holding down the Shift key.

Instead of a subsequent reboot, the user may see a “select action” option. To do this, press the button “search” and “fix problems”.

In Windows 8, press the Diagnostics button. Then click on “additional options” and “properties of the installed software”.

Why do you need to go there?

Those who have to log into the system using a laptop and computer probably wondered why this should be done.

So, to reinstall systems, you first need to enter this program. And this happens quite often.

In other words, they go there in order to change the boot of their computer from a hard drive to a regular one or to a USB flash drive.

Often, to protect a computer or laptop from prying hands, users set a new password through the BIOS.

Due to the password set in this way, the system will not boot until the user enters the password correctly.

Also, this program checks the temperature of some components and controls the speed of installed coolers or fans.

BIOS on laptop

Honor needs one more small but important detail. In most used laptops, manufacturers are practicing new keyboard shortcuts.

precisely, the key for entering, for example, F2 remains the same. However, on a laptop keyboard, you should not only hold down the F2 key. but also Fn.

In general, as it is already clear, with Sony Vaio laptops, not everything is so simple. As they say, there seems to be a door for the entrance, but no one knows where it is located. By the way, there is still controversy about such an incident from the Sony corporation. Indeed, even from a logical point of view, it is completely incomprehensible why it was necessary to make such a tricky decision, and not use standard, generally accepted methods. It’s like, despite the simplest and shortest path, deliberately go around, thereby complicating your task.

In certain circumstances, you may need to call up the BIOS interface, since it is used to configure the operation of certain components, prioritize boot (needed when reinstalling Windows), etc. The process for opening the BIOS on different computers and laptops can be different and depends on many factors. These include the manufacturer, model, and configuration features. Even on two laptops of the same line (in this case, Sony Vaio), the conditions for entry may differ slightly.

How to enter BIOS Sony Vaio: “charms” and whims

Let’s start a little from afar. To be honest, many computer scientists still do not understand why the specialists of the corporation, as they say, make life difficult for users out of the blue. First of all, this concerns the installation of hard drives in their “advanced” laptops, which clearly do not correspond to the capabilities of the computer system as a whole. They also have a rotation speed of 5400 rpm.

And this is far from the only example. The same goes for the problem of how to enter the Sony Vaio BIOS. Alas, many users complain that the standard pressing of the Del key, as is customary in most computer systems, does not lead to anything. It is not surprising, because any manufacturer of this type of equipment, depending on the motherboard, sets its own rules for the use of access sequences to the subsystem. But in Sony Vaio, entering the BIOS is not even so much a difficult problem as an original and even contrived one (a little later it will be clear why).

In addition, the principles of access to the subsystem for different models differ quite strongly. Something is hard to believe that this is due exclusively to the “motherboards”. Nevertheless, in Sony Vaio, you can enter the BIOS in several ways, and one of them does not fit into the concept of common sense at all. But let’s try to consider all the available options, so to speak, from a general point of view.

Alternative login method

If you figure out how to enter the Sony Vaio BIOS in relatively new modifications, again, depending on the model, some alternative option may be provided here. It also consists in using two function keys, however, in this case it is F8 and F12.

The situation repeats itself: you need to use more than one key, but to press them one by one, and several times. And you need to do this very quickly (as soon as information about the system appears on the screen). The process of displaying data itself lasts only about a second, and not all users have time to notice what exactly needs to be pressed or what actions to perform in order to get into the subsystem and configure something there.

Standard login method

So, on almost all known laptops, including the outdated Sony Vaio models, the entry into the subsystem is carried out by pressing the F2, F3 keys or pressing them together with Del. Speaking specifically about the products of this manufacturer, the BIOS on a Sony Vaio laptop can only be accessed by pressing the corresponding key several times.

It also happens that both function keys are intended for this: F2 and F3. Some people try to press one of them several times, but the result is zero. Here you need to try their alternate use, because sometimes the system simply does not have time to intercept the signal from the keyboard. But even on this “surprises” are not downloaded.

How to get into BIOS sony vaio

Your Sony laptop BIOS vayo. stands for Basic Input / Output System. is essentially a low-level program that transfers messages between your computer’s hardware and its operating system. The Configuration Utility controls a number of important functions, including telling the operating system the order in which devices are booted and configuring hard disk and memory settings.

BIOS updates to fix errors, adjust boot time, or change other features are automatically sent to your computer, but you can also change these settings manually. for example, to fix a compatibility issue after installing new hardware. The steps required to access this utility differ depending on the operating system you are using.

Windows 8 and 8.1
Start by shutting down your laptop and then hit the Help button. The location of this button depends on your computer model, so check your user documentation if you cannot find it on your computer.

You can download a PDF of your manual from the Sony website if you no longer have your copy.
As soon as the Assist button has been activated, the VAIOCare Rescue Mode screen appears. Use the arrow keys to select Start BIOS Setup F2. and then press Enter to select an option.

In the BIOS setup utility, use the up and down arrow keys to navigate through the options and the Enter key to select the modification you want to implement. To exit a screen or option, press the ESC key.
When you are finished making changes, press the ESC key until the Exit menu appears. Press the F10 key to save and exit the utility.

If your old Sony VAIO laptop is still running Windows 7, start by shutting down and restarting your computer. When the black VAIO logo appears. Press the F2 key several times — for about ten seconds — to launch the BIOS setup utility. BIOS or Basic I / O System allows business administrators to configure available computer hardware options.

Sony VAIO brands are equipped with many standard BIOS features, including hard drive settings, startup protocols, and hardware component information. While most VAIO-based laptops have a corresponding BIOS keyboard, other laptop configurations are not as intuitive.

Here’s a smart boot order for setting new systems in BIOS by default: optical drive, external media, internal hard drive. This way, any bootable media works as expected without requiring users to go through the BIOS first. Sacrificing screens that instruct users on how to use the basic functionality of a machine for aesthetics is the wrong decision, but just makes your equipment difficult to use.

If you need to have beautiful screensavers, remove them when you press a key so that the user can see valuable information such as keys for accessing BIOS and POST information. Having a splash screen that requires a change in the BIOS to make it go away in order to see information on how to access the BIOS is suicidal.

Please return the installation media or have people purchase it easily and cheaply. It would be great if OEM system manufacturers offered the ability to download the appropriate installation media directly from the manufacturer’s website.

For boot authentication, you may need a registered system with serial system information. Thus, the cost of disk inventory and shipping does not increase. It would also allow customers to quickly resolve issues as the customer could go anywhere with Internet access to quickly and easily obtain the required recovery disc.

This provides the added benefit of stopping the ridiculous, constant waste of space on computers to provide long-term storage of data that may never be used and may be corrupted by the time it is needed.

Fortunately, the Vaio series has a dedicated key on the keyboard called ASSIST. When you click on it while the computer is booting (until the OS logo appears), a menu will open where you need to select the “Start BIOS Setup” item. Also, opposite each item, it is signed which key is responsible for calling it. Within this menu, you can navigate using the arrow keys.

In Vaio models, the spread is small, and the correct key is easy to identify by the age of the model. If it is obsolete, then try the F2, F3 and Delete keys. They should work most of the time. For newer models, the F8, F12 and ASSIST keys will be relevant (the features of the latter are discussed above).

If none of these keys worked, then you will have to use the standard list, which is quite extensive and includes these keys: F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, Delete, Esc. In some cases, it can be refilled in various combinations using Shift, Ctrl or Fn. Only one key or their combination is responsible for the input.

You should never exclude the option of obtaining the necessary information about entering the technical documentation for the device. The user manual can be found not only in the documents that come with the laptop, but also on the official website. In the latter case, you will have to use the search bar, where the full name of the model is entered and various documentation is searched in the results, among which there should be a user’s manual in electronic form.

Also, when the laptop boots up, a message may appear on the screen with the following m “Please use (the desired key) to enter setup”, by which you can find out the necessary information about entering the BIOS.

So, on almost all known laptops, including the outdated Sony Vaio models, the entry into the subsystem is carried out by pressing the F2, F3 keys or pressing them together with Del. Speaking specifically about the products of this manufacturer, the BIOS on a Sony Vaio laptop can only be accessed by pressing the corresponding key several times.

READ  Configuring Camera In Asus Laptop

It also happens that both function keys are intended for this: F2 and F3. Some people try to press one of them several times, but the result is zero. Here you need to try their alternate use, because sometimes the system simply does not have time to intercept the signal from the keyboard. But even on this “surprises” are not downloaded.

If you figure out how to enter the Sony Vaio BIOS in relatively new modifications, again, depending on the model, some alternative option may be provided here. It also consists in using two function keys, however, in this case it is F8 and F12.

The situation repeats itself: you need to use more than one key, but to press them one by one, and several times. And you need to do this very quickly (as soon as information about the system appears on the screen). The process of displaying data itself lasts only about a second, and not all users have time to notice what exactly needs to be pressed or what actions to perform in order to get into the subsystem and configure something there.

Finally, the most original solution. It so happens that the user has already tried almost all possible combinations. Nothing helps. Here you need to take into account one small nuance, which refers to modern modifications of laptops. The fact is that the new models have a non-standard keyboard. Almost none of the users pays attention to this. But in vain. The keyboard has an unclear ASSIST key. That’s where the dog is buried!

It is she who is responsible for entering the BIOS, or rather, not even in the BIOS, but in the so-called “Rescue Menu”. It goes without saying that in order to achieve the desired effect, it must also be pressed several times. But after the signal is triggered, literally within two seconds, the desired menu with options for choosing actions will be displayed on the screen.

How to enter BIOS of Sony Vaio from this menu?

It’s very simple. press the F2 key. And, lo and behold! Subsystem settings are finally available. Now you can safely start working with the main parameters.

Exit from the subsystem is carried out in the classical way: either through the menu with the SaveExit Setup line, or by using the F10 key (well, at least they did not trick here, otherwise the user, who was exhausted when looking for a solution to enter, would still start to puzzle how to get out of here ).

How to start BIOS if standard methods don’t work

However, in the line of Sony Vaio laptops there are rare exceptions when none of the above methods work. What to do?

Firstly, if the laptop is officially purchased, you should look at the accompanying set of technical documentation or user manual. Typically, there is a whole section on entering BIOS. Secondly, in Windows, in the system information section, you can find out the BIOS version and look for a description of how to enter it. Thirdly, in the same section, you should look at the marking of the motherboard and try to apply the search for a solution to the problem (entering the BIOS) using these parameters. It goes without saying that in search engines you can also specify the full abbreviation for the modification of the laptop itself, but in most cases this does not help much.

BIOS launch on VAIO laptops is almost the same as launching it on other laptops, most often BIOS launch on Sony laptops is done by pressing the F1, F2 or F3 keys when the VAIO logo appears.

Let’s take a look at a few step-by-step ways to start BIOS on VAIO notebooks.

Way
Turn on your laptop.
When VAIO appears on your laptop screen, press and hold the “F2” key.

On a note! If this does not happen, then restart the laptop and repeatedly press the “F2” key when VAIO appears again.

Way
Turn on your laptop.
When VAIO appears on your laptop screen, press the “EscF2” key combination.

The BIOS settings screen will be displayed.

On a note! If this does not happen, then restart the laptop and repeatedly press the “EscF2” key combination when VAIO appears again.

Way
Important! Suitable only if the “ASSIST” key is present on the laptop / the operating system Windows 8 or higher is installed.

You need to shutdown or restart your laptop.
Next, you need to press and hold the “ASSIST” button, which is located at the top of the keyboard.

When a menu appears with the words VAIO Care (“Rescue Mode”), select the 4th item of this menu “Run BIOS settings”, or press “F2”. How to exit BIOS correctly while saving new parameters
Way
After changing the parameters you need, press “F10” (or “F4”) to exit the BIOS.

When the context menu appears with confirmation of the exit, press “OK” (or the “Y” key) to save the settings change and exit.

Next, go to the line “Save Changes and Reset” (or “Exit Save Changes”). When the context menu appears with confirmation, click “OK” (or the “Y” key).

Without saving changed parameters

Important! BIOS settings need to be changed deliberately, so in which case you need to know how to undo all changes so that everything works as before.

Way
To prevent the settings from being saved, press the “Esc” key.

When a window appears with confirmation of the exit, click “OK” (or the “Y” key).

Way
Go to the “Save Exit” (“Exit”) tab.

Then go to the line “Discard Changes and Exit” (or “Exit Discard Changes”). When a confirmation window appears, press “OK” (or press “Y”).

Configuring Boot from External Media

Way
Turn on your laptop.
Connect a bootable disk or USB device.

Turn off your laptop.
Press and hold the ASSIST button located at the top of the keyboard.

When your laptop displays “VAIO Care” | “Rescue Mode” select the 3rd item of this menu to boot from any external drive (USB / optical drive) or click “F11”.

Way
Turn on your laptop.
Connect a bootable disk or USB device.

Reboot your laptop.
Boot into the BIOS menu by pressing the “ASSIST” button, or the “F2” key (the “EscF2” combination).

Go to the “Security” tab, select “Secure Boot Control” and change its value to “Disabled”.

Go to the “Boot” tab, select and change its value to “Legacy”.

Select “External Device Boot” change the value to “Enabled”.

Then select “Boot Device Priority” (or “Removable Devices”).

In the “Boot Device Priority” window, select the media from which you want to boot (let in this case it will be “3rd Boot Device” [ATAPI CD-ROM]).

In the open window, move your media (as a rule, this is “External Device”) to the first place and save the changes by pressing the “F10” (or “F4”) button, in the window that appears, click “OK” and the PC will boot from the media.

Way
Turn on your laptop.
Insert bootable disk / USB device.

Reboot your laptop.
When VAIO appears on your laptop, press and hold the “F11” (or “Esc”) key. The menu for configuring boot devices (“Boot Menu”) will be displayed, select the device from which you want to boot.

On a note! If this menu does not appear, then restart the laptop and repeatedly press the “F11” (or “Esc”) key when VAIO appears again.

If the methods above did not bring you the desired result, then refer to the user manual of your laptop or write to Sony support.

The BIOS is entered using the F2 or F3 keys. But the catch is that the time for pressing is quite limited, sometimes you have to press the same key several times or use both keys alternately.

In some models, a slightly different solution is used, partially similar to the previous one. In them, the problem of how to enter the Sony VAIO BIOS is solved using the F8 or F12 keys. Again, sometimes a single press does not work.

Sony VAIO Pro: how to enter BIOS using an alternative method?

If you look at later modifications, they use a solution that an ordinary user, without a hint from the outside, perhaps would not have guessed.

In this case, the problem of how to enter the Sony VAIO BIOS is solved by pressing the special ASSIST key located directly on the keyboard panel at the top right. However, for some reason, the login mode is called VAIO Care (rescue mode), and not the direct user expected direct input.

First, a special menu appears, in which you need to select an option. And to gain access to the BIOS, you need to use the function key F2

So, the entrance is made. Fortunately, in Sony VAIO laptops the BIOS and basic parameters of the computer system are configured using standard methods, and the menu names do not differ much from the generally accepted ones. In the same way, the changed settings are saved and exited (F10 and the letter “Y” to save the parameters). What to do if entry is impossible?

But these were only the main methods used. But it often happens that none of them works. What to do in this case? Most experts advise you to read the technical documentation or use information about the installed motherboard, and then look for a solution to the problem precisely by modifying it.

You can get this information from Device Manager (devmgmt.msc) or from the complete system configuration description (msinfo32). The given shortcut commands are entered in the “Run” console, called by pressing the Win R keys together. After that, all that remains is to enter a search query and see exactly how you can enter the primary system.

To make a more accurate request, you can use the serial number of the motherboard or special identifiers DEV and VEN, which can be found in the properties of the motherboard controller in the “Device Manager” (for this, the information tab is used) or in the same system configuration.

It turns out that to enter the BIOS on a Sony laptop, you need to turn off the laptop and press the ASSIST key. I turn off the laptop, press the ASSIST key on the laptop panel and the laptop starts to boot. Literally in 2 seconds, the start menu appears, from which you can immediately go to the BIOS.

The fact that Sony Corporation is one of the leading manufacturers of computer or mobile equipment probably does not need to be explained to anyone. True, sometimes she throws out such “surprises” that an unprepared person will obviously have to puzzle many hours before realizing what’s what. In particular, this applies to laptops. Many of their “happy” owners do not understand at all how to enter the Sony Vaio BIOS. Well, since this is the case, let’s try to deal with this rather interesting and difficult question.

Sony Vaio: how to start BIOS if standard methods don’t work

However, in the line of Sony Vaio laptops there are rare exceptions when none of the above methods work. What to do?

Firstly, if the laptop is officially purchased, you should look at the accompanying set of technical documentation or user manual. Typically, there is a whole section on entering BIOS. Secondly, in Windows, in the system information section, you can find out the BIOS version and look for a description of how to enter it. Thirdly, in the same section, you should look at the marking of the motherboard and try to apply the search for a solution to the problem (entering the BIOS) using these parameters. It goes without saying that in search engines you can also specify the full abbreviation for the modification of the laptop itself, but in most cases this does not help much.

READ  How to Fix Laptop Keyboard

Special key

Finally, the most original solution. It so happens that the user has already tried almost all possible combinations. Nothing helps. Here you need to take into account one small nuance, which refers to modern modifications of laptops. The fact is that the new models have a non-standard keyboard. Almost none of the users pays attention to this. But in vain. The keyboard has an unclear ASSIST key. That’s where the dog is buried!

It is she who is responsible for entering the BIOS, or rather, not even in the BIOS, but in the so-called “Rescue Menu”. It goes without saying that in order to achieve the desired effect, it must also be pressed several times. But after the signal is triggered, literally within two seconds, the desired menu with options for choosing actions will be displayed on the screen.

How do I enter the Sony Vaio BIOS from this menu? It’s very simple. press the F2 key. And, lo and behold! Subsystem settings are finally available. Now you can safely start working with the main parameters.

Exit from the subsystem is carried out in the classical way: either through the menu with the SaveExit Setup line, or by using the F10 key (well, at least they did not trick here, otherwise the user, who was exhausted when looking for a solution to enter, would still start to puzzle how to get out of here ).

Enter BIOS on Sony

Fortunately, the Vaio series has a dedicated key on the keyboard called ASSIST. When you click on it while the computer is booting (until the OS logo appears), a menu will open where you need to select the “Start BIOS Setup” item. Also, opposite each item, it is signed which key is responsible for calling it. Within this menu, you can navigate using the arrow keys.

In Vaio models, the spread is small, and the correct key is easy to identify by the age of the model. If it is obsolete, then try the F2, F3 and Delete keys. They should work most of the time. For newer models, the F8, F12 and ASSIST keys will be relevant (the features of the latter are discussed above).

If none of these keys worked, then you will have to use the standard list, which is quite extensive and includes these keys: F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, Delete, Esc. In some cases, it can be refilled in various combinations using Shift, Ctrl or Fn. Only one key or their combination is responsible for the input.

You should never exclude the option of obtaining the necessary information about entering the technical documentation for the device. The user manual can be found not only in the documents that come with the laptop, but also on the official website. In the latter case, you will have to use the search bar, where the full name of the model is entered and various documentation is searched in the results, among which there should be a user’s manual in electronic form.

Also, when the laptop boots up, a message may appear on the screen with the following m “Please use (the desired key) to enter setup”, by which you can find out the necessary information about entering the BIOS.

Thank the author, share the article on social networks.

How the login process works on a Sony Vaio laptop?

It is worth recalling that never try to enter this menu with the laptop turned on, if the gadget is turned on, be sure to turn it off. What you need to do next is to find the main BIOS key called “assist”, it is located next to the on / off key.

Immediately after pressing it, you will see three red lights turn on. And only after that will the loading of the “Rescue Mode” typical for Sony notebooks take place. After the rescue mode is fully loaded and comes into its own, you need to find and click on the item “Run BIOS settings” in the proposed list of actions, which is called.

This list contains the keys, pressing which in this mode will bring up the required menu. In this case, it is F2

After you have done this, you can go to the “BOOT” tab, since it is at this point that you will need to make changes to the BIOS boot settings.

Navigation in this menu is done by manipulating the arrow keys, go back. esc, and confirm the selection. enter.

Save changes by pressing F10.

You can ask a question to the masters from our service center by calling by phone or by writing your question on the feedback form.

You might also be interested in

Sony laptop entering BIOS

In certain circumstances, you may need to call up the BIOS interface, since it is used to configure the operation of certain components, prioritize boot (needed when reinstalling Windows), etc. The process for opening the BIOS on different computers and laptops can be different and depends on many factors. These include the manufacturer, model, and configuration features. Even on two laptops of the same line (in this case, Sony Vaio), the conditions for entry may differ slightly.

BIOS Standard Entry Methods

The procedure for entering the BIOS menu is quite simple. To do this, turn off the device and turn it on again. It is important not to miss the moment between turning on and loading Windows. Depending on your laptop model, one of these keys may be responsible for this action: F2, F3, F8, or Dell.

Laptop manufacturer Sony Vaio for models such as Sony Vaio sve151j11v, svf152c29v, svf152a29v, sve171e13v, sve151e11v, sve171g11v, pcg 71211v, vgn and others has provided a slightly different login method.

Sony Vaio laptop repair in 1 day

Order a repair in our service center, and you will receive a working device on the same day, with a guarantee up to 1 year

Find out the exact time and cost of repairs Thank you, no need

I ran into the problem of entering the BIOS of a sony vaio laptop only a couple of years after purchasing it. I own a SONY SVE171E13V model. which is already outdated and I wanted to modernize it. Install Windows 10 instead of 8. Change the HDD to an SSD. 4GB of RAM increase to 8.

After installing all the new hardware, I rebooted the laptop and then problems began with entering the BIOS of my Sonya. Standard laptop login methods by pressing F2. F12 and desktop computers Del (Delete) key did not work.

I am quite good at computers, but this was the first time I encountered Sony technology, and I immediately got such a kick. This is not to be arrogant. I went for answers on the Internet and immediately understood what was the matter.

Enter BIOS on Sony

Fortunately, the Vaio series has a dedicated key on the keyboard called ASSIST. When you click on it while the computer is booting (until the OS logo appears), a menu will open where you need to select the “Start BIOS Setup” item. Also, opposite each item, it is signed which key is responsible for calling it. Within this menu, you can navigate using the arrow keys.

In Vaio models, the spread is small, and the correct key is easy to identify by the age of the model. If it is obsolete, then try the F2, F3 and Delete keys. They should work most of the time. For newer models, the F8, F12 and ASSIST keys will be relevant (the features of the latter are discussed above).

If none of these keys worked, then you will have to use the standard list, which is quite extensive and includes these keys: F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, Delete, Esc. In some cases, it can be refilled in various combinations using Shift, Ctrl or Fn. Only one key or their combination is responsible for the input.

You should never exclude the option of obtaining the necessary information about entering the technical documentation for the device. The user manual can be found not only in the documents that come with the laptop, but also on the official website. In the latter case, you will have to use the search bar, where the full name of the model is entered and various documentation is searched in the results, among which there should be a user’s manual in electronic form.

Also, when the laptop boots up, a message may appear on the screen with the following m “Please use (the desired key) to enter setup”, by which you can find out the necessary information about entering the BIOS.

Thank the author, share the article on social networks.

How to enter BIOS on a Sony Vaio laptop

How to enter BIOS on a Sony Vaio laptop

The need to enter the BIOS is due to some serious failures, problems, the inability of a laptop to cope with its work, to perform its functions. Enter the BIOS settings if you plan to reinstall the operating system on your laptop. If you have any difficulty, let the Sony laptop repair technician solve the problem.

Special button

To enter the BIOS, Sony has created a dedicated ASSIST button. If you want to enter the BIOS of a Sony laptop, then first turn it off, and then start the laptop by pressing this button. Boot the recovery menu, which translates as rescue mode. Inside there is an item “Run BIOS settings”, which can be launched by pressing F2 or by clicking the mouse.

Below is a normal video on how to enter BIOS on a Sony laptop. I set the beginning from the right moment, so as not to waste time looking at empty information.

Why Sony has departed from the method of entering the BIOS, which is familiar to all users, is not clear to me, but that is what it is. When you know how to do it, it does not cause any particular problems.

Also, do not neglect to read the instructions and user manuals. Most likely the moment is reflected there. Our laziness works wonders. Better to mess around with something for 2 hours than to spend 10-15 minutes studying the problem and solving it in 1 minute.

Conclusions and possible questions

  • The ASSIST button must be pressed when the laptop is turned off, then it turns on in recovery mode, where there is an item to enter the BIOS.
  • There is a lot of controversy about the fact that if the hard drive fails, then you cannot enter the BIOS, since the ASSIST button is programmatically tied to the disk. This is not entirely true.

Firstly, by pressing a button, we go not into the BIOS itself, but into the recovery mode, in which only 1 of the points allows you to enter it.

Secondly, when replacing an old disk with a new one, it will automatically boot from an external media (flash drive, cd-dvd disk). The recovery mode will not work here, since there is nothing and nothing to recover from. We have nothing to do in the laptop BIOS until we install a new Windows. After installation, everything will work normally.