Setting up lte as desired on iPhone

Setting up a mobile operator’s network

Most often, if the Internet cannot be turned on on the iPhone, this is most likely due to the APN package, which is responsible for receiving data from the Internet. Enabling and configuring this package will not take you much time, you literally just need a few minutes to connect it.

The data that you need to enter in the APN settings fields are individual, because they are different for all mobile operators, and if you enter the wrong data, then the Internet simply will not work for you. In this article, we will provide information on how to fill in the APN fields of the most popular operators in our country.

To configure the APN connection, proceed to: Settings-next-Cellular-next-Cellular data.

setting, desired, iphone

Next, enter the information of the telephone operator providing you services:

Activating and Configuring LTE Mode on iPhone

Apple has established itself as a quality company that from year to year continues to delight its users with pleasant gifts, so in January of this year, in Russia, the Lte network became available, also often referred to among people as the usual 4G Internet.

The LTE network increases the speed of the Internet by several hundred times, compared to 3G, which allowed you to use speeds of up to 3.6 Mb / s.

So the average speed of the lte network is about 350 mb / s, which gives it an advantage, because you can use the Internet without any delays, on your favorite gadget. Of the 2 currently existing coatings in Russia, LTE technology undoubtedly wins, both in speed and in reliability. It is worth noting the fact that the first network launched lte beeline, which gave rise to the spread of this network to iPhones.

But, the main question that Apple technology users are asking is how to set up their iPhone so that it receives the lte signal? It should be understood that the 4G Internet technology appeared several years ago, and only today, it has begun to spread in Russia, the first step is to ask your operator if the LTE network is supported in your city. Of course, if you live in the regional center or the capital, then you can easily access this network.

Customization

Then how to enable lte on iphone 5s? Everything is quite simple, first you need to check how the operator’s network parameters are configured on the device. First, you should check the Internet settings and their state that your mobile operator provides to you.

To check this parameter, you need to enter the cellular section and make sure that you have 3G / Lte modes enabled. If the setting turned out to be incorrect, and you do not have this mode enabled, do not worry, this problem is easy to fix. To do this, you again need to go to Settings. then. Cellular.

In this section, you must include in order:

  • Cellular data.
  • Enable 3G / Lte Mode.

After you have activated the parameters, you should enable data transfer and check if it works. Having turned it on, you should see an inscription above the reception scale in the upper corner, which will be written with the letter E, or 3G / Lte. If you do not have the Internet at all, then you should check its access in the area where you are, or take your phone to a service center to check the body of the transmission module, which is responsible for the Internet in your phone.

If, however, everything is in order with your phone, then you most likely do not have an APN network configured, which depends on your cellular operator. Also, do not forget to update your IOS to the latest available version, because it is an important part of connecting to the lte network.

Motive

After setting up the phone, you should check the inclusion of the 3G or lte network, if you do not have it, then you should restart your phone and do everything you wrote again, re-checking the Internet connection. If, all attempts were useless and did not bring results, then you should contact a specialist at the nearest service center of your operator.

IPhone 12 owners complain about arbitrary LTE and 5G shutdown

Some iPhone 12 users started complaining about LTE and 5G failures.

The problem is often observed while driving. Solution one. restart the network by turning Airplane mode on and off.

Resetting network settings does not help, the problem still reappears. There are already over 400 disaffected people on Reddit, and their number continues to grow.

Read also. All

    Where is data transfer to iPhone?

    To enable or disable the cellular data function, go to the Settings menu and select Cellular or Mobile Data. On iPad, this menu is called Settings Cellular.

    How to Allow USB Data Transfer to iPhone?

    From the Settings menu, select Face ID & Passcode or Touch ID & Passcode and turn on USB accessory access under Lock Screen Access. If USB accessory access is disabled (as in the image above), you may need to unlock your iOS device to connect to USB accessories.

    How to enable mobile data on iPhone?

    To turn on cellular data on your device, follow these steps:

    • Open the “Settings” menu.
    • Select from the menu: iPhone (iOS 6): “General” → “Network”; iPhone (iOS 7 and above): Cellular; iPad (iOS 6 and above): Cellular Data.
    • Turn on the Cellular Data toggle switch. Related Articles

    How to turn on 4G on iPhone?

    How to enable LTE (4G) on iPhone and iPad

    Open Settings → Cellular → Data Options → Voice & Data. 2. Check the box next to LTE. In the pop-up message, click “Enable LTE”.

    How to disable VoLTE on iPhone?

    If you are tired of the option and you do not need to improve communication, here’s how to remove the VoLTE function:

    • Open “Settings”;
    • Select the “Cellular” menu item;
    • Click on the line “Data parameters”;
    • Click on “Enable LTE”;
    • Select the Data or Off option.

    How to go online on iPhone?

    Go to “Settings” and select the “Cellular” section. Tap the slider to the right of the “Cellular Data” label. it will turn green, and the letter “E” or the word GPRS will appear to the right of the name of your operator. We just went online!

    How to set up an LTE network?

    Android: Menu → Settings → Connections → Other networks → Mobile networks → Network mode → 4G / 3G / 2G (automatic connection). Windows Phone: Settings → Data Transfer → Fastest Connection → 4G.

    What are the opportunities for distributing LTE to other devices

    Distribution via Bluetooth. Your Mac or iPad must be connected via Bluetooth to the iPhone.

    Pros: wireless connection.
    Cons: Waste iPhone battery, slow data transfer speed, complicated setup.

    Wi-Fi. In this case, your iPhone will turn into a Wi-Fi transmitter.

    Pros: connection does not require wires, Singal is stable, easy setup, the ability to connect multiple devices at the same time.
    Cons: May drain your iPhone battery.

    Pros: Internet access while charging iPhone, stable connection without interference.
    Cons: a wire is required, such a connection binds to the connection point, it is inconvenient to move around the room, it is possible to connect only one device.

    How to set up LTE over cable lightining

    Connect iPhone to Mac with lightining cable. Open iPhone Settings / Hotspot / Enable Hotspot.

    In MacBook open System Preferences / Network.

    Click on the USB item on the iPhone, uncheck the “Disconnect if you don’t need it” checkbox on the right, click the “apply” button.

    To disconnect the connection, check the “Disconnect if you don’t need it” checkbox again and click the “Apply” button. Or disable tethering in iOS settings.

    How to set up LTE over Wi-Fi

    Open iPhone Settings / Hotspot / Wi-Fi Password and set a password that will need to be entered for the connected device.

    If the connected device is authorized with the same Apple ID as the iPhone, then you can not enable the modem mode. When connected, it will turn on and off automatically.

    If the connected device is not authorized, you need to enable the modem mode, then all devices around will be able to see your iPhone.

    On the MacBook menu bar, click on the Wi-Fi icon and select your iPhone from the list. When the connection is established, the Wi-Fi icon will change its appearance to a special icon.

    How to use iPhone to distribute LTE internet to other devices

    Recently, mobile Internet has become more and more accessible, its spread is more and more extensive and the quality of communication in some parts of cities reaches the level of home Internet. In addition, tariffs that allow using mobile Internet without restrictions in a certain period of time are becoming more and more widespread.

    Suppose you have an iPhone with mobile internet configured, which works great, but besides the iPhone, you have other devices, such as the iPad, that only work over Wi-Fi. From your iPhone, you can share mobile internet with them.

    For example, you can set up your iPhone so that it can distribute it to your other devices while connected to its mobile Internet. In our example, we will use the LTE Internet from MTS installed in the iPhone and distribute it to the iMac and MacBook. The connection speed was checked by the Internet meter service from Yandex.

    How to set up LTE over Bluetooth

    Open iPhone / Bluetooth settings and turn it on. Without closing this menu open MacBook System Preferences.

    Go to the Bluetooth section, select your iPhone from the list, click “Pair”. On iPhone, allow the connection by clicking on the corresponding menu.

    In OS X in the same window, check the box “Show Bluetooth in the menu bar” below.

    In the OS X menu, click on the Bluetooth icon, select your iPhone from the list and click connect to network.

    Speed ​​tests

    Different connection technologies have different data rates. For example, Bluetooth technology has a low data transfer rate. A quick test of the Internet speed in the case of a Bluetooth connection allowed the MacBook to access the Internet at 4Mbps.

    When connected via Wi-Fi, the data transfer rate was significantly higher, it was almost 12 Mbps.

    READ  How to turn off data saver on iPhone

    The leader in terms of speed was the type of cable connection, showing 18 Mbps.

    The connection speeds shown in our test are only approximate. Many factors and interference can affect speed.

    But what can be said for sure is that the iPhone can be an excellent source of modern mobile Internet for other devices. Various connection options can be convenient for different cases, and the data transfer speed is quite sufficient to comfortably use the Internet and perhaps even eventually forget about what the Internet is “by wire”.

    How to set up LTE over Wi-Fi

    Open iPhone Settings / Hotspot / Wi-Fi Password and set a password that will need to be entered for the connected device.

    If the connected device is authorized with the same Apple ID as the iPhone, then you can not enable the modem mode. When connected, it will turn on and off automatically.

    If the connected device is not authorized, you need to enable the modem mode, then all devices around will be able to see your iPhone.

    On the MacBook menu bar, click on the Wi-Fi icon and select your iPhone from the list. When the connection is established, the Wi-Fi icon will change its appearance to a special icon.

    How to set up LTE over Bluetooth

    Open iPhone / Bluetooth settings and turn it on. Without closing this menu open MacBook System Preferences.

    Go to the Bluetooth section, select your iPhone from the list, click “Pair”. On iPhone, allow the connection by clicking on the corresponding menu.

    In OS X in the same window, check the box “Show Bluetooth in the menu bar” below.

    In the OS X menu, click on the Bluetooth icon, select your iPhone from the list and click connect to network.

    How to set up LTE over cable lightining

    Connect iPhone to Mac with lightining cable. Open iPhone Settings / Hotspot / Enable Hotspot.

    In MacBook open System Preferences / Network.

    Click on the USB item on the iPhone, uncheck the “Disconnect if you don’t need it” checkbox on the right, click the “apply” button.

    To disconnect the connection, check the “Disconnect if you don’t need it” checkbox again and click the “Apply” button. Or disable tethering in iOS settings.

    What are the opportunities for distributing LTE to other devices

    Distribution via Bluetooth. Your Mac or iPad must be connected via Bluetooth to the iPhone.

    Pros: wireless connection.
    Cons: Waste iPhone battery, slow data transfer speed, complicated setup.

    Wi-Fi. In this case, your iPhone will turn into a Wi-Fi transmitter.

    Enable LTE on iPhone

    Pros: connection does not require wires, Singal is stable, easy setup, the ability to connect multiple devices at the same time.
    Cons: May drain your iPhone battery.

    Pros: Internet access while charging iPhone, stable connection without interference.
    Cons: a wire is required, such a connection binds to the connection point, it is inconvenient to move around the room, it is possible to connect only one device.

    Your iPhone can be used as a modem to connect other devices (MacBook, iMac, iPad) to the mobile Internet

    Recently, mobile Internet has become more and more accessible, its spread is more and more extensive and the quality of communication in some parts of cities reaches the level of home Internet. In addition, tariffs that allow using mobile Internet without restrictions in a certain period of time are becoming more and more widespread.

    Suppose you have an iPhone with mobile internet configured, which works great, but besides the iPhone, you have other devices, such as the iPad, that only work over Wi-Fi. From your iPhone, you can share mobile internet with them.

    For example, you can set up your iPhone so that it can distribute it to your other devices while connected to its mobile Internet. In our example, we will use the LTE Internet from MTS installed in the iPhone and distribute it to the iMac and MacBook. The connection speed was checked by the Internet meter service from Yandex.

    Speed ​​tests

    Different connection technologies have different data rates. For example, Bluetooth technology has a low data transfer rate. A quick test of the Internet speed in the case of a Bluetooth connection allowed the MacBook to access the Internet at 4Mbps.

    When connected via Wi-Fi, the data transfer rate was significantly higher, it was almost 12 Mbps.

    The leader in terms of speed was the type of cable connection, showing 18 Mbps.

    The connection speeds shown in our test are only approximate. Many factors and interference can affect speed.

    But what can be said for sure is that the iPhone can be an excellent source of modern mobile Internet for other devices. Various connection options can be convenient for different cases, and the data transfer rate is quite sufficient to comfortably use the Internet and perhaps even eventually forget about what the Internet is “by wire”.

    How to enable 4G LTE on iPhone: description, features, pros, cons and customization

    Hello everyone! Now I will try to answer the question: what is LTE in the iPhone? LTE is a wireless communication standard that replaced 3G and opens up access to high-speed Internet for the owners of mobile equipment, modems and routers. LTE’s goal is to increase overall throughput (upload and download metrics) with new digital signal processing techniques and redesigned network architectures.

    Features of LTE in Apple technology

    NOTE! The indicated values ​​are largely unattainable in everyday life: the final results are influenced by the frequencies chosen by the operator, the location of the base stations, and the overall load on the network. But even with all the errors of 3G, such speed values ​​cannot be reached.

    • Frequencies. Russian operators rely on frequency bands around 1805-1880 MHz (the most common), as well as combinations like 2620-2690 MHz, 791-821 and 2570-2620.

    The disadvantages and unpleasant features of LTE include increased requirements for battery capacity (the battery is discharged many times faster both when searching for the nearest base stations of a mobile operator, and at the time of downloading content from the network), and a slowly growing coverage map. The “new generation” Internet is not found in all regions of the Russian Federation, and therefore it remains only in large cities and regions to count on a speed of 100-150 Mbps.

    How to enable LTE on iPhone and why nothing works

    The parameters of wireless standards in iOS are selected in the “Settings” section, in the “Cellular” menu.

    The list that opens contains details related to the selected operator, statistics of data downloads from the network, and parameters of current mobile connections.

    And in the latter case, to access additional settings, you will first have to activate the “Cellular data” slider, and only after that, go to the thematic menu.

    Further, setting up LTE comes down to a couple of actions: click on the “Voice and data” item, and then. forcibly activate LTE with VoLTE technology. if you wish, it is possible to disable VoiceOverLTE to reduce the quality of calls in order to save traffic. Alternatively, you can choose 3G as a guide to the world of network technologies. How to enable LTE on iPhone?

    The procedure is the same. Minor discrepancies are possible due to older iOS versions. If you cannot configure LTE, then before contacting support, you should go through the points below:

    • Why is LTE not included. Apple’s official support associates problems with new standards for wireless data transmission with an incorrectly selected SIM card, poor coverage (there are not enough LTE stations in the “home region”) and outdated Apple technology. Prior to the release of the iPhone 5, models like the 4S and earlier were not able to interact with new technologies. There are also problems with how to enable 4G on the iPhone. in some regions and countries, operators have already abandoned mobile networks with a special frequency range supported by a smartphone. As a result, even after choosing the necessary parameters and buying a SIM card, it remains to rely exclusively on 3G or 2G.
    • Software problems. If you encounter problems with finding LTE networks even in large cities on compatible Apple technology, the developers recommend first toggling the “Cellular” slider and then restarting the iPhone. If nothing has changed, you will have to reset the network settings in the iOS settings.

    Thematic settings are hidden in the “Basic” section, in the “Reset” sub-item. After going to the menu from the list of actions that appears, it remains to select “Reset network settings”.

    The procedure in some cases involves entering the password set in the system, as well as restarting the iPhone.

    After the reset, you do not need to copy the settings presented on the official website of the mobile operator: iOS will automatically adjust to the required operating mode.

    How to set up 4G on Android?

    On Android and don’t know how to set up superfast 4G? To get started, buy a new SIM card at any branch of the company. If nothing has changed, then pay attention to the specified parameters. This information is located in the smartphone settings. Brief activation instructions:

    • Open the “Settings” section.
    • Go to the “Mobile network” menu.
    • Now open the “Network Type” section.
    • In the list that opens, turn on the item LTE or 4G.

    Now, be sure, the Internet is automatically turned on. It is worth noting that when leaving the 4G coverage area, the phone reconfigures itself. How to get back on the smartphone will resume fast Internet.

    APN settings

    How to set up 4g MTS? You can activate it yourself. For this you need:

    • Create a special profile for the connection. Enter MTS INTERNET data here.
    • Specify the exact data of the APN modem, namely internet.mts.ru.
    • Enter the correct username and password. In the graphs, enter the word mts.

    The setup takes approximately 5 minutes. Even if you don’t understand the setups, the steps are easy and accessible for everyone. If you have any difficulties, you can call the number and contact the operator. He will answer any questions and quickly solve any problem.

    Setting up 4G on MTS

    The MTS company provides high-speed Internet in any Android or iPhone. If you have a question “How to connect 4g Internet to MTS?”, Then try to understand the tariff plan. You will most likely need to purchase a separate SIM card and modem. Thus, get high speed regardless of your phone or tablet model. Insert a new card into Android and start the installation.

    READ  IPhone fell and does not turn on what to do

    How to Fix 3G/4G/LTE Problem on iPhone

    How to connect 4G LTE Internet to MTS: step by step setup

    How to connect 4g to MTS within one day? If you are faced with the problem of lack of 4g Internet then use the short connection instructions. In the 21st century, 4g is the fastest mobile access. Any device: tablet, mobile phone or smartphone can work with fast internet. It is especially suitable for those who are online 24 hours a day, 7 days a week. High-speed Internet will allow you to watch movies and TV series from your smartphone, send voice messages and video calls. Every user can get such an Internet. The main thing is that in the region of residence there is access to the network.

    How to connect 4G on iPhone?

    IPhone owners change settings on the phone. Just one keystroke will provide new access to the world wide web. Changing the old format to the new one is free of charge anyway. The tariff cost remains the same. The speed of use is changing. Follow further instructions:

    • Open the menu and select the size “Cellular”.
    • Select the item called “Data Parameters”.
    • Select the sub-item “Voice and data”.
    • In the new window, click on the “LTE” button.

    Thus, follow the recommendations and provide yourself with quick access. Now it is possible to freely read news, watch videos and share them with friends on the way to work. Answer SMS and voice calls. The speed will impress even the most demanding users. It’s easy to be in touch 24 hours a day!

    The ways

    How you can distribute the Internet from the iPhone, we wrote here.

    There are three tethering modes you can use on iPhone:

    • Connecting the phone to a computer on MAC, Windows 7 or 10 via USB (Lightning), and distributing the Internet;
    • Creation of an access point and distribution of a secure Wi-Fi connection with your password;
    • Connection as a modem to a PC via Bluetooth pairing.

    Instructions

    How to distribute the Internet from iPhone via USB is described in the following

    • Activate this function. You can see the steps required to connect the device as a modem.

    To connect your iPhone via USB tethering, connect it via Lightning to your PC and select yes to the question “Trust this computer”? Next, the computer will configure the network adapter, detect a new network and connect to it. Also, through the new local network, the PC will have access to the Internet.

    If this did not happen automatically, select your iPhone in the network settings and connect to it manually.

    If your iPhone does not turn on tethering, this is the place for you.

    Traffic limit

    Using the iPhone as a modem connected via USB to a PC or laptop with Windows 7 or 10, set the traffic limiter in this way:

    • Press the WinI key combination in Windows 10 and open “Network and Internet”.
    • Click on the “Etnernet” section and the network to which you are currently connected.
    • Activate the slider “Set as a limited connection” and go to setting the limit.
    • Select the options you want and click “Save”.
    • Windows will tell you about some services that should be turned off when the traffic is limited.

    The system will notify about the imminent end of traffic and block access when the entire package is used up.

    Limitations

    When the smartphone is connected to a PC via a USB port:

    • Discharges faster than usual, but when connected via USB, the battery charge remains at the same level, and in moments of “idle” it gradually charges.
    • GSM module is active, so you can receive SMS and calls.
    • When an incoming or outgoing call is made, the Internet is interrupted. Recovered at the end of the conversation.
    • WAN login from iPhone will also be available.
    • Tariffication of traffic from mobile operators is calculated by the number of received and sent packets.
    • If you do not have unlimited, you can check the traffic status in the settings of the network adapter by opening the “Status” parameter.

    Windows 10 has a feature to set the limit for the traffic used. It will help you not to go into negative territory and stop the traffic flow in time.

    How to connect iPhone in tethering mode to computer via USB?

    The user-friendly interface of the iOS operating system allows you to execute any command on the iPhone in a few steps. After reading this guide, you will learn how to activate tethering mode via USB on iPhone.

    Features of the

    • make sure you have a package with gigabytes or have enough funds on your balance to connect to the Internet;
    • iPhone sees a stable 3G or 4G LTE connection;
    • the computer port defines the devices connected to it;
    • original lightning is used;
    • the computer must have the latest version of iTunes installed.

    If all conditions are met, proceed with the setup.

    It’s easy to connect your iPhone as a modem. The main thing is to have the original lightning installed by iTunes, and so that the phone can handle 3G / 4G LTE connections. If the GSM module only catches GPRS, the modem may be interrupted.

    The story of how sometimes it’s better not to touch the default iPhone settings

    Each owner of any device with settings considers it his duty to reconfigure “to suit his tastes.” Sometimes we do it out of a desire to improve, fix, optimize something. Unfortunately, the result is not always positive.

    I recently purchased an iPhone SE running iOS 10. During the first few days of use, I began to notice that the battery was draining rather quickly. Having contacted Support Apple, I was given several recommendations, such as: make the screen brightness quieter, turn off unused services, and the like. Of course, such advice does not always help, since a number of services simply cannot be turned off, and by lowering the screen brightness, the device will be inconvenient to use outside in clear weather.

    So I kept looking for ways to increase the battery life of the iPhone SE and read on Apple’s website that, among other factors, battery life can be affected by how well the iPhone can handle cellular communications. Where I usually find my mobile operator (MTS) gives out 2 bars, which is generally not enough. In an attempt to improve this, I tried to enter special commands to improve the search for towers, which gave nothing. Then I did what seemed to be not a terrible thing at all. Paying attention to the fact that in the settings for choosing a cellular operator is “automatically”, I decided to try to set MTS forcibly.

    After restarting the iPhone, it became clear that this also did not produce any changes. I changed the setting back to “automatic”. I already completely forgot about this case, the next day I discovered that I did not have an LTE connection. 3G only. Attempts to return it back led only to the appearance of a strange sign “this cellular network is not certified by the operator for LTE on the iPhone.”.

    Having looked for a problem in search engines, it turned out that I am not the only one who has it and, in general, even on different mobile operators. If Honor had the fact that Apple only allows LTE to work with the cellular operator whose networks it tests itself, it looked more than strange. I tried the Megafon SIM card and LTE immediately worked fine. So it was not the device itself.

    Appeals to Support Apple and MTS did not yield any results. I was offered to restore the device (it did not help), and also sent the settings to the Internet, which did not differ in any way from those that had already been entered.

    I didn’t want to be left without LTE, and I continued to rummage through the forums on this topic until I found a message from my brother in misfortune:

    “The problem has been solved, but for some reason ordinary office workers do not know about it: the employee assured me for an hour that H and LTE are the same format. You need to contact MTS support to update your Internet settings on your number. If they update, you will receive two notifications in a row: the first one about the disconnection of the Internet on the number, the second. about inclusion. After that, switch the Internet in the phone settings to 3G, then back to LTE (4G). Everything should work. I changed my SIM card more than five times, turned to the office for help, the problem was not solved for two years. As a result, I wrote an angry letter to the MTS customer support mail, everything was fixed in the above way in a couple of hours “.

    Which I did. Having written a similar message through the MTS feedback form, I began to wait and after a few days I received an SMS “Mobile Internet service is disabled on your number” and almost immediately another “Mobile Internet service is connected to your number”. LTE has been successfully launched.

    If you have the same problem. And for some, it appears even when buying a new iPhone, you know: you can solve it, the main thing is to accurately describe what you want the operator’s support service to do.

    Settings for using on mobile danny

    For yes, set up the GPRS modem device, follow these steps:

    • Choose Settings
    • Choose Cellular
    • Enable Cellular Data
    • Choose Cellular Data Options
    • Choose Cellular Data Network
    • Go to APN under Cellular Data and enter internet.vivacom.bg
    • Go to Username and enter VIVACOM
    • Go to Password and enter VIVACOM
    • Pull the bud Home, for yes you will go to the main menu

    For using mobile data roaming, in Settings → Cellular → Cellular Data Options, enable Data Roaming.

    Settings for permissive on mobile phones Danni prez 4G (LTE) are not available

    For permissiveness on mobile phones Danny prez 4G (LTE) is free, follow these steps:

    • Choose Settings
    • Choose Cellular
    • Choose Cellular Data Options
    • Choose Voice Data
    • Choose LTE
    • Pull the bud Enable LTE.

    Setting up lte as desired on iphone

    NB: When selected for English (U.K.) in Cellular setting not replaced by Mobile

    For yes, set up MMS prez GPRS, follow these steps:

    • Choose Settings
    • Choose Cellular
    • Enable Cellular Data
    • Choose Cellular Data Options
    • Choose Cellular Data Network
    • Go to APN under MMS and enter mms.vivacom.bg
    • Go to Username and enter mms
    • Go to Password and enter mms
    • Go to MMSC and enter http://mmsc.vivacom.bg
    • Go to MMS Proxy and enter 192.168.123.123:8080
    • Go to MMS Max Message Size and enter 307200
    • Open MMSUAProfURL and enter http://www.Apple.com/mms/uaprof.rdf
    • Natisnebuton Home, for yes you will go to the main menu
    READ  How to Delete Instagram Conversations on iPhone

    Settings for Personal Hotspot

    For yes, make the Internet connection to your phone, follow these steps:

    • Choose Settings
    • Choose Cellular
    • Enable Cellular Data
    • Choose Cellular Data Options
    • Choose Cellular Data Network
    • Go to APN under Personal Hotspot and enter internet.vivacom.bg
    • Go to Username and enter VIVACOM
    • Go to Password and enter VIVACOM
    • Pull the bud Home, for yes you will go to the main menu

    The next step is on the settings, in Settings again, the Personal Hotspot menu appears, from here you can activate it on the data.

    Izbor on the edge

    When you switch to Automatic, you will still see a list from the cash of the sea, from which you can choose one according to your choice. Acceptable for clients on VIVACOM, selected by.

    Distributing Wi-Fi from iPhone

    If you turned on the modem mode and when you had Wi-Fi on the iPhone, you also turned on, you can turn on the modem as a “router” or, in fact, an access point. For the sake of it, just connect to the childless mesh with the iPhone’s (your_im’s) with a password, which you can enter or wonder in the settings for the modem on your phone.

    Connections, as a rule, go through without any problems, and the Internet immediately becomes available on PCs or laptops (if you think about it, you can do it with Wi-Fi without problems).

    Yak enable modem mode on iPhone

    To turn on the modem mode on the iPhone, go to “Nalashtuvannya”. “Stylnikovy zyazyazy” and cross over, so the transfer of tribute through the stylnikovy line is turned on (item “Stylnikovy dani”). When the transmission is switched on, the modem will not be displayed in the settings below. How to navigate when a stylus connection is connected, you do not see the modem mode, here you can also use the instructions to work, if the modem mode on the iPhone is missing.

    Write, read on the point of adjusting “Modem mode” (which is in the section of the parameters of the stylistic ring and on the head screen, adjust the iPhone) and enable it.

    If at the moment you turn it on, you will have Wi-Fi and Bluetooth enabled, the iPhone will be proprietary to turn it on, so you can use it not only as a modem via USB, or via Bluetooth. Also, below you can enter your password for Wi-Fi fingering, so that the iPhone will be distributed, in case you will be victorious as an access point.

    USB connection (yak 3G or LTE modem)

    For the iPhone in modem mode via a USB cable (use the original cable from the charger attachment) in Windows 10, 8 and Windows 7, it is obligatory to install Apple iTunes (you can connect it without a cable from the official website) ‘appear.

    In addition, since everything is ready, and the modem mode on the iPhone is turned on, just connect it via USB with a PC. If the phone shows up on the screen, if you need to turn on the PC (if you turn on the first time), please show it right (if the modem is not working properly).

    After a short hour, you will have a new connection on the local grid “Apple Mobile Device Ethernet” and the Internet connection (at any time, I am responsible). You can peer over the camp by clicking on the sign in the panel at the bottom right with the right button of the Misha and Vibravshi item “Center for control of fences and remote access”. Then you can vibrate “Change adapter parameters” and then add a list of all connections.

    Modem iPhone via Bluetooth

    If you want to pick up your phone as a modem via Bluetooth, you need to add it to Windows. Bluetooth, of course, is to blame for the inclusion of both the iPhone and the PC or laptop. Dodati pristіy in different ways:

    • Click on the Bluetooth icon in the area and select the right button and vibrate the item “Add Bluetooth attachment”.
    • Go to the control panel. Attach the printer, natisnut “Attachment to the attachment” in the mountains.
    • For Windows 10, you can also go to “Parameters”. “Attachment”. “Bluetooth”, I will try to know the attachment will be automatic.

    Writing the knowledge of your iPhone, in the form of a vicious way, draw on the icon with it and natisnit abo “Zvyazati”, abo “Dali”.

    On the phone, turn on the power to the wager, and vibrate “Create a couple”. And on PC’yuteri. zbig secret code with a code on the attachment (don’t want to punch any code on the iPhone itself). Natisnit “So”. In very good order (compiled on iPhone, sometimes on PC).

    If you want to, go to the Windows connection (press the Win R keys, enter ncpa.cpl and press Enter) and vibrate the Bluetooth connection (if there is no connection, no work is required).

    At the top row, draw “Review of the Bluetooth fencing attachments”, see the window in which your iPhone will be displayed. Click on the new right mouse button and vibrate “Connect through”. “Access point”. The Internet is guilty of connecting and earning.

    IPhone Modem Mode

    As long as you have an iPhone, you can use it in modem mode via USB (like 3G or LTE modem), Wi-Fi (like a mobile point of access) or via Bluetooth. At tsіy іnstruktsії. reports about those how to turn on the modem mode on the iPhone and vikoristovuvati yogo for access to the Internet in Windows 10 (the same for Windows 7 and 8) or MacOS.

    I would like, well, if I myself do not have a problem (in Russia, in my opinion, there is no such thing), even the operators can block the mode of the modem, or, more precisely, access to the Internet by the add-ons (tethering). If, for some reason, the modem on the iPhone does not have any rank to activate the modem mode, it is possible to clarify the information about the availability of services from the operator, as well as in the statistics below.

    Vikoristannya iPhone as a modem in Windows

    So, like Windows on our PCs and laptops, it is more often to be developed, below OS X, I’ll start from the whole system. Windows 10 and iPhone 6 and iOS 9 are used for applications, but, I think, in the future and in the future versions there will be little that will be seen.

    Victorian iPhone in modem mode on Mac OS X

    The fact that I have to connect an iPhone as a modem to a Mac, I don’t know, but I don’t know how to write, it’s simpler here:

    • With Wi-Fi, just connect to the access point of the iPhone with the password set on the side and set up the modem mode on the phone (in case of some problems, you may not know the password, as you can use one on the Mac iCloud entry).
    • When the modem is in the modem mode via USB, everything is locked automatically (for the modem mode on the iPhone it is switched on). If it didn’t work, go to the system settings of OS X. Take care, vibrate “USB on iPhone” and pick up the “Vimcnit, as you don’t need” icon.
    • And only for Bluetooth you will need to go: go to the system settings of your Mac, vibrate “Merezha”, and then. Bluetooth Pan. Learn “Set up Bluetooth” and know your iPhone. By installing a connection between two annexes, the Internet will become available.

    Axis, mabut, and everything. If you have lost food, ask in the comments. The mode for the iPhone modem is clear, in the first place, it is turned on, and the transfer of data on the mobile is turned on.

    Table of Contents