Samsung A3 2016 does not turn on

Samsung tech support tip

Following the advice of Samsung technical support, we suggest trying the following very effective way to restore your mobile phone to work:

  • Press and hold the “Volume Down” and “Power” buttons
  • Hold them for 7-12 seconds
  • If after that your device started working, then a very common failure occurred in its operation.

If the problem persists, then move on to the next solution.

[EASY STEPS] How to fix Samsung Galaxy A3 with Black Screen of Death issue

Flashing with ODIN

If after resetting the parameters, the device does not work, then you should try to reflash it. We are looking here for the firmware for your smartphone model, download the ODIN program from this link and install the drivers for Windows, and then proceed to the instructions.

    Launch the ODIN application by unzipping it before

samsung, 2016, does, turn

  • In the off state of the device, we hold down the “Volume down” and “Power” buttons, and then press the volume button up
  • We connect the phone to the computer, press the key with three dots opposite “AP” and select the firmware file, which is in the.md5 format
  • After a minute or more, the “Start” button should become active. Click on it when it becomes possible and then the firmware process will go.
  • In a few minutes, the gadget should automatically reboot. If you are stuck with the loading animation then try doing a factory reset again.
  • Check charger and cable

    Perhaps your Samsung smartphone is dead and won’t turn on. You plugged in the charger but nothing happens. First of all, try to take charge from another gadget, and if the phone reacted to it and began to receive a charge, then the problem is in it. The next step is to change the USB cable to determine what exactly stopped working. If, after replacing the wire, your charger began to charge the smartphone battery, then the reason is its malfunction.

    Factory reset

    All data will be lost, including unsynchronized contacts, messages, call history, application data, and files in the phone memory. The contents of the memory card will remain intact.

    • Enter the recovery by holding the “Volume up” and “Power on” buttons in the off state of the device.
    • Select “Wipe data / factory reset” from the list and press the power button
  • After the process is complete, select “Reboot system now” and wait for the device to start.
  • Samsung Galaxy won’t turn on. we restore the work of the smartphone

    Sometimes Samsung Galaxy smartphones or tablets may stop turning on for no reason. The Android operating system crashes, but most often users have problems due to the pre-installed ROOT rights. Now you will learn how to revive the device, if, of course, this is not a hardware failure.

    There are several ways and we will start with the most obvious and simple ones.

    Clearing the cache

    Formatting the phone memory partition that stores the entire cache.

    • Enter the recovery by holding the “Volume Up” and “Power On” buttons on the switched off device until an inscription with the name of your phone model appears on the screen
    • After starting the recovery, using the volume buttons, select “Wipe cache partition” and then press the power button to complete the process
  • When finished, select “Reboot system now” by pressing the power button.
  • The attempt was unsuccessful? After rebooting, the device didn’t work properly? Moving on to more complex ways.

    Viruses

    Exposure to viruses can also cause Wi-Fi not to turn on on Android. Today, you can find a fairly large number of owners of mobile gadgets who prefer not to use standard anti-virus applications, believing that they are very heavy on system resources. This is partly true. However, modern mobile antiviruses can not only prevent viruses from entering the system, but also block access to the device if it is lost or stolen.

    If there is a problem with viruses, you should install the appropriate application. But what if Wi-Fi isn’t working? It’s very simple. First, the program can be downloaded as an APK file from a computer, then transferred to a removable memory card and installed, and then fully check the system. Secondly, installation can be done directly from a computer terminal or laptop if there is a control application like PC Companion or something else, of course, using a gadget connection using a regular USB cable.

    What to install is a personal matter. However, among all the variety of such applications, we can recommend 360 Security, which today is recognized as one of the most powerful, the same Dr. Web or McAffee. However, as it is already clear, it is very difficult to advise something specific.

    Basic Recommendations for Wi-Fi Recovery on Android

    If Wi-Fi on Android does not start, first of all you should:

      check if the “airplane” mode is on;

  • check if the date and time are out of order;
  • try restarting your smartphone or tablet;
  • check if the Wi-Fi router is working (if possible) and restart;
  • check the settings of the Wi-Fi router;
  • delete the network profile and re-enter the password on the mobile device.
  • Oftentimes, the reason for Wi-Fi not working turns out to be very simple. But it does not always consist in a wrong password or a lost time. If after all the actions, the Wi-Fi icon still remains gray, it’s time to move on to more decisive.

    Samsung smartphone does not see Wi-Fi

    Wi-Fi is available almost everywhere. It is used at home and at work, in cafes and on the subway. Modern telephones are equipped with transceiver devices that can easily connect to a local network and access the Internet through access points or hotspots. But there are situations in which the Samsung smartphone does not see Wi-Fi. It is impossible to establish the exact reason for the failed wireless connection without conducting special technical diagnostics. Consider in the article:

    • Parameter check;
    • Operating system crash;
    • Damage to the Wi-Fi module
    • Service Center Recommendations.
    READ  How to Free Up Internal Storage on Samsung Phone

    possible failures and methods of their elimination

    Owners of mobile devices based on Android operating systems sometimes, infrequently, however, face the problem that in some cases Wi-Fi does not work. What is the reason for this and how to get rid of such a problem, now it will be shown.

    Samsung Galaxy phone can’t see Wi-Fi

    Unstable connection reasons

    The first step is to establish why the network is unstable. There are many reasons for unstable Wi-Fi connection on Android. The most common ones are:

    • Firewall of mobile antivirus is blocking the connection.
    • Software malfunction.
    • Incorrect router settings.

    It is worth noting that the last two points are related to the Android operating system only indirectly: that is, the reason for the unstable connection lies not in the smartphone or tablet, but in the router and its settings.

    So let’s take a closer look at these errors and their solution.

    Operating system crash

    Another reason why the smartphone does not see Wi-Fi. operating system crash. The device will not connect to the Internet of the router in a-Priora. Before you panic, SC specialists recommend restarting the device. Updating and resetting to factory settings does not always help. Such a failure is a signal of serious problems in the operation of the phone OS. For phone firmware, contact the Service Center.

    Settings glitches and master reset

    If the previous methods did not help and Wi-Fi still does not turn on on “Android”, it is very likely that the system itself or its settings are broken. Correcting the situation, and at the same time the cure can be a complete reset of the parameters to the factory state.

    At the same time, in the recovery and reset section, you should first check the box next to the auto recovery line (after a reset, when the system is rebooted, all personal data and files, including applications, can be restored without problems). Then a hard reset is simply selected, followed by a system reboot. By the way, note that in this case you don’t need a hard reset, everything is perfectly restored and so (provided, of course, that the system is not infected with viruses and has the original firmware).

    Samsung Galaxy A3. reasons why it won’t boot

    Samsung Galaxy A3 turns on and does not load beyond the splash screen, or perhaps refuses to respond to your actions at all? Turns off by itself and does not respond to charging? Do not start by disassembling the device, thereby immediately destroying the warranty card. Most often, the problem lies in one of two factors:

    • If it starts and doesn’t load, the OS is to blame. The reason may be another failure of the new Android, or a virus, or an incorrectly installed firmware. All this is being corrected and corrected. It is not necessary to have specific skills to correct a software error, it is enough to be able to connect a gadget to a computer.
    • When the smartphone turns off and does not turn on, it does not respond to charging, Android may have nothing to do with it. Since the device has turned off and does not start, it does not respond to charging, then the battery is more often to blame. Check the battery and charger on another device, then try to directly power the gadget using another battery.

    Before taking any action on a gadget that has passed out, do some basic diagnostics. Depending on the signs of life that the device delivers, it will be possible to diagnose and prescribe a “treatment”

    You should not run to the service when the device is charging, but does not turn on if you have not dropped it into water or doused it with wine. Rarely, but hardware failures do occur due to the age of the accessory. Nothing in this article helps and do not know how to revive your “companion”? Most likely you are one of those “lucky ones” who got a premature corrosion of the board or a burnt out processor. All that remains is to go to the service.

    Samsung Galaxy A3. turned on but no sound

    This means that the Samsung Galaxy A3 has turned on. Apparently, the display is damaged or the cable has moved away, broke, burned out.

    Solution: you can try to open the device and check the contacts.

    The operation is not recommended for an inexperienced user! When removing the housing, it is recommended to use a suitable screwdriver from the special set in order not to knock off the threads of the screws.

    Having decided to open the device, remember. this will definitely void your warranty on it. If none of the methods helped, the reason lies in the breakdown of a physical component on any board or in the wrong algorithm for carrying out the work outlined above. In this case, it is possible to establish the true cause only in the SC by diagnosing.

    Clearing cache on Samsung Galaxy A3

    Formatting the phone memory partition that stores the entire cache.

    Enter the recovery by holding the “Volume up” and “Power on” buttons on the turned off device until the inscription with the name of your phone model appears on the screen After starting the recovery, using the volume buttons, select “Wipe cache partition”, and then press the power button, to complete the process.

    When finished, select “Reboot system now” by pressing the power button. The attempt was unsuccessful? After rebooting, the device didn’t work properly? Moving on to more complex ways.

    Faulty charger and battery

    One of the most common reasons the Samsung Galaxy A3 won’t turn on is if the charger and battery are faulty.

    The charger must be checked without fail, since when a defective device is connected, a short circuit occurs. The phone is discharged at this moment, and therefore does not show signs of life.

    Solution: check the charging on another device or vice versa. Inspect the charger for damage, broken wires, breaks, melting of the winding (if the charger was lying somewhere near an open heat source).

    If you notice that Samsung does not turn on after the charge level reaches 0, and the phone refuses to respond to charging, you should suspect a battery breakdown. Test it on other devices. Is the unit working, but the device still does not start and the charge sensor does not work? The battery could simply burn out, do the same manipulations with it. Does the other device show the same symptoms when exchanging batteries? Buy a new one, because yours is broken.

    READ  How to take a screenshot on Samsung G2

    The main reasons why Samsung Galaxy A3 does not turn on

    Samsung Galaxy A3 does not turn on. this is a fairly common problem among owners of this smartphone model. In most cases, this happens for some unknown reason, and the user is faced with the question: what to do if his beloved Samsung Galaxy A3 does not turn on. I don’t want to go to the service center (SC). Do not rush to get upset, sometimes you can fix problems yourself.

    Android is the most popular operating system in the world, and at the same time, one of the most unstable. So it happens that you wanted to install a new firmware on an old Samsung A3 or installed a system update, but the phone went out and refuses to start again.

    Why the flooded Samsung Galaxy A3 smartphone does not turn on in 2 parts

    There is a common problem in the operation of smartphones of all types, including the Samsung Galaxy A3 (Galaxy A3) phones. It may seem that the screen is not working and the phone is not responding to keystrokes. Initially, the download may start and the inscription Samsung will be displayed on the screen, and then the phone may simply freeze.

    Contact Samsung Service Center

    If the previous tips did not help, a diagnosis and repair is required at a Samsung service center.

    There can be many reasons for a breakdown: moisture ingress, battery failure, mechanical damage to the connector, etc. The exact reason can only be called by the master after diagnosis.

    What’s happening

    The smartphone or tablet does not turn on, does not respond to button presses. Screen black.

    Why Samsung A3 2016 does not turn on

    Sometimes the smartphone breaks down for some reason, and the user is faced with the question: what to do if his beloved Samsung Galaxy A3 does not turn on. I don’t want to go to the service center (SC). Do not rush to get upset, sometimes you can fix problems yourself.

    Software problems

    Your Samsung Galaxy A3 could simply freeze due to a third-party app installed on Android or incorrect firmware.

    Solution: turn off the phone for 5 minutes. If there are no results at all, then we hold down the Power Home button (key in the center) “Volume up”. The phone will go into recovery mode. If this happened, then everything is fine with him. Choose wipe data / factory reset. Confirm by clicking Yes. The phone should turn on, but the data will be deleted from the memory. keep this in mind when deciding!

    This method also helps if your smartphone loads endlessly at startup or slows down a lot.

    Remember: if you are advised to remove the battery to solve the problem and wait a little, you are talking to an amateur: the model’s battery is not removable!

    Try restarting your device

    To do this, simultaneously press the “Power” “Volume Down” keys and hold them for 7. 10 seconds.

    If your device won’t turn on, go to the next tip.

    Samsung Galaxy A 3 won’t turn on after flashing

    After installing the pirated firmware, the screen went out, the device stopped turning on, and even Recovery does not start? Most likely, this is due to the crookedly set and not fitted to the OS processor. Each custom system must be selected for a specific device and its characteristics, otherwise fatal failures occur, and the device turns into a “brick”. But even this condition is curable. Immediately after a complete discharge, connect the mobile to the computer. You need to see the response in the system, for example, the inscription “Installing a new driver”.

    If the device is somehow recognized, this will be enough to completely demolish the frozen system and install a normal one. For the same reason, the smartphone is constantly rebooting, and here it is necessary to remove the battery, and then connect the device to the PC in the same way. Then just wait until the installation is complete and launch the gadget if it doesn’t start automatically. What to do if Samsung Galaxy A3 does not turn on even after such manipulations? Or did the screen light up and shut off abruptly? Perhaps the problem is already in the hardware and it is worth taking the accessory to the service.

    Sometimes the smartphone breaks down for some reason, and the user is faced with the question: what to do if his beloved Samsung Galaxy A3 does not turn on. I don’t want to go to the service center (SC). Do not rush to get upset, sometimes you can fix problems yourself.

    Samsung Galaxy A3. turned on but no sound

    This means that the Samsung Galaxy A3 has turned on. Apparently, the display is damaged or the cable has moved away, broke, burned out.

    The operation is not recommended for an inexperienced user! When removing the housing, it is recommended to use a suitable screwdriver from the special set in order not to knock off the threads of the screws.

    Having decided to open the device, remember. this will definitely void your warranty on it. If none of the methods helped, the reason lies in the breakdown of a physical component on any board or in the wrong algorithm for carrying out the work outlined above. In this case, it is possible to establish the true cause only in the SC by diagnosing.

    Charging is broken

    This component must be checked without fail, since a short circuit occurs when a defective device is connected. The phone is discharged at this moment, and therefore does not show signs of life.

    The original charger on the Samsung Galaxy A3 is not one-piece, but consists of 2 parts: the actual plug case and the cord. Any of the components can be damaged

    Solution: check the charging on another device or vice versa. Inspect the charger for damage, broken wires, breaks, melting of the winding (if the charger was lying somewhere near an open heat source).

    Software malfunction

    If the Samsung Galaxy A3 does not show signs of life and does not turn on, then the problem may lie in the smartphone software. Most of the time this is due to a third party app installed on Andro /

    The solution to the problem lies in the following: turn off the phone for 5 minutes. If there are no results at all, then we hold down the Power Home button (key in the center) “Volume up”. The phone will go into recovery mode. If this happened, then everything is fine with him. Choose wipe data / factory reset. Confirm by clicking Yes. The phone should turn on, but the data will be deleted from the memory.

    Faulty charger and battery

    One of the most common reasons the Samsung Galaxy A3 won’t turn on is if the charger and battery are faulty.

    READ  How to connect Samsung a 70 to a computer

    The charger must be checked without fail, since when a defective device is connected, a short circuit occurs. The phone is discharged at this moment, and therefore does not show signs of life.

    If you notice that Samsung does not turn on after the charge level reaches 0, and the phone refuses to respond to charging, you should suspect a battery breakdown. Test it on other devices. Is the unit working, but the device still does not start and the charge sensor does not work? The battery could simply burn out, do the same manipulations with it. Does the other device show the same symptoms when swapping batteries? Buy a new one, because yours is broken.

    Why Samsung Galaxy A3 won’t turn on and what to do about it

    Before running to the SC, let’s look at a number of popular situations. Surprisingly, more than half of all equipment owners who turn to repair do not need it. At least their phones are intact in terms of mechanical damage. Here’s what to look out for first.

    Samsung Galaxy A3. reasons why it won’t boot

    Samsung Galaxy A3 turns on and does not load beyond the splash screen, or perhaps refuses to respond to your actions at all? Turns off by itself and does not respond to charging? Do not start by disassembling the device, thereby immediately destroying the warranty card. Most often, the problem lies in one of two factors:

    • If it starts and doesn’t load, the OS is to blame. The reason may be another failure of the new Android, or a virus, or an incorrectly installed firmware. All this is being corrected and corrected. It is not necessary to have specific skills to correct a software error, it is enough to be able to connect a gadget to a computer.
    • When the smartphone turns off and does not turn on, it does not respond to charging, Android may have nothing to do with it. Since the device has turned off and does not start, it does not respond to charging, then the battery is more often to blame. Check the battery and charger on another device, then try to directly power the gadget using another battery.

    Before taking any action on a gadget that has passed out, do some basic diagnostics. Depending on the signs of life that the device delivers, it will be possible to diagnose and prescribe a “treatment”

    You should not run to the service when the device is charging, but does not turn on if you have not dropped it into water or doused it with wine. Rarely, but hardware failures do occur due to the age of the accessory. Nothing in this article helps and do not know how to revive your “companion”? Most likely you are one of those “lucky ones” who got a premature corrosion of the board or a burnt out processor. All that remains is to go to the service.

    Contact Samsung Service Center

    If the previous tips did not help, a diagnosis and repair is required at a Samsung service center.

    There can be many reasons for a breakdown: moisture ingress, battery failure, mechanical damage to the connector, etc. The exact reason can only be called by the master after diagnosis.

    What’s happening

    The smartphone or tablet does not turn on, does not respond to button presses. Screen black.

    How to Fix Samsung Galaxy A3 not turning on,

    Clearing the cache

    Formatting the phone memory partition that stores the entire cache.

    • Enter the recovery by holding the “Volume Up” and “Power On” buttons on the switched off device until an inscription with the name of your phone model appears on the screen
    • After starting the recovery, using the volume buttons, select “Wipe cache partition” and then press the power button to complete the process

    When finished, select “Reboot system now” by pressing the power button.

    The attempt was unsuccessful? After rebooting, the device didn’t work properly? Moving on to more complex ways.

    Samsung Galaxy turned off and won’t turn on. reasons

    If your Samsung has turned off and won’t turn on, it can damage the operating system, but this happens very rarely.

    Much more often the reason is in the battery. Of course, the first thing you do is connect the charger and nothing happens.

    You are confident in the outlet, in the cable, in the charger itself and in the contacts in the smartphone’s socket. Check these things and make sure they are not the cause. It happens that the contacts on the battery are out of order, and this leads to the fact that the phone does not turn on.

    In this situation, it can be very helpful to remove the battery and clean out the old contacts that connect to the battery.

    Removing the battery will also reset the phone somewhat. The above method is only for smartphones with a removable battery.

    Also pay attention to the power button itself. it also does not last forever, although it does not break often, it does happen. If none of the above helped turn on the phone, then the problem may be inside the Samsung Galaxy phone. in its components.

    Factory reset

    All data will be lost, including unsynchronized contacts, messages, call history, application data, and files in the phone memory. The contents of the memory card will remain intact.

    • Enter the recovery by holding the “Volume up” and “Power on” buttons in the off state of the device.
    • Select “Wipe data / factory reset” from the list and press the power button

    After the process is complete, select “Reboot system now” and wait for the device to start.

    What to do if your Samsung Samsung Galaxy phone won’t turn on

    All Samsung phones can be restored even if they won’t turn on. just not all the same.

    If there is a “Home” button, then press it together with two others: “Power” and “Increase sound” (you need to hold down three at the same time).

    If there is a “Bixby” button, then at the same time you need to hold it down instead of “Home”. If there is no “Home” or “Bixby”, then together hold and hold “Power” and “Volume up”.

    Release “Power” when the inscription “Samsung Galaxy” appears, and hold the steel ones for another 10 seconds until the menu appears.

    Then use the sound buttons to select “Wipe data / factory reset” and click on “Power”. Then, in the same way, select and confirm “Yes” or “Yes. Delete all user data”.

    click on “Reboot system Now”. Samsung will reboot and start working as new, only all personal data will be erased.