Not enough memory on the laptop what to do

Not enough RAM on the computer not enough what to do

enough, memory

Memory is an integral part of any modern device, so a modern user cannot do without its successful performance. Today you will learn why Windows writes insufficient memory and how to solve the problem with its insufficient memory on a PC.

There can be many reasons for errors associated with insufficient memory, but the following window will accompany them in almost all cases:

The reasons for the appearance of the problem may be the following:

The computer does not have enough RAM.
2. Overflowing hard drive or SSD.
3. High consumption of computer memory caused by heavy applications or viruses.
4. Insufficient or missing paging file size.

Random access memory is a very important component of a computer, as it is responsible for the information directly transmitted to the central processor. Accordingly, a small amount of RAM can slow down the PC.

The paging file has the most simple, but at the same time useful function. storage of information not contained in RAM. In other words, it saves computer resources, as well as accelerated access to pre-prepared data. It is for this reason that the computer system may react negatively to the fact that the paging file is missing or malfunctioning.

One or more processes are used to run the application, which is responsible for optimal performance. Too much load from such processes can overload the RAM. You can see this process in more detail in the task manager.

Open the task manager (hotkey CTRLSHIFTDEL)
2. Open the “Processes” tab and find there those that you are not using at the moment.

Click on the required field with the left mouse button, then use the “End task” button in the lower right corner.

The physical memory of the computer is responsible for storing various files on the device. If the drive is more than 90% full, the PC may slow down. To free up space from unused applications, we recommend using CCleaner. With this utility, you can easily get rid of unnecessary files in automatic mode.

There are many programs designed to exploit or destroy your system. These are difficult to find, but it is easy to check for them. You can do this using the task manager, viewing memory consumption for individual applications.

Open the task manager and go to the “Processes” tab. Then click on the following button:

Right-click on the “Gluttonous” program itself to find out where its file is stored.

Remove the found program from your computer to solve the problem.

READ  How to make a memory card main on Samsung

Make sure the file is not located in one of the Windows system folders. In this case, the virus is located at the root of your system and its removal may disrupt the operation.

To clean your computer from viruses, we recommend using the following utility:
Download Dr.Web cureit

By following the instructions above, you will most likely be able to solve the problem with insufficient memory on your computer. We hope our article helped you.

Windows error: there is not enough memory on the computer

Divorces when buying and selling an iPhone on Avito: new deception schemes

If the “There is not enough memory on the computer” error occurs, it is caused by a shortage of RAM as well as virtual memory. In this regard, the most likely reasons that can cause this situation are as follows:

  • There is a real shortage of physical RAM;
  • A lot of processes are currently running on the computer (these can be both programs and sessions inside running applications, for example, browser tabs);
  • The hard disk is almost completely occupied. in this case, the paging file will not work normally;
  • There are also programs that can cause what is called a memory leak. a situation when the application takes up all the available space to perform its tasks.

It is for these reasons that the operating system gives the error “There is not enough memory on the computer to free memory, close programs.”.

Actually, the solution to this problem depends on the root cause.

If the reason is that the hard drive is completely occupied and there is not enough memory on the computer, then you will need a disk cleaning utility to free it. The beauty of it is that it will not allow you to delete the files that are used by the system and make it inoperable. In other words, Windows Disk Cleanup will help you safely delete temporary files and a number of other, in most cases useless, files. You can start it by right-clicking on the C: drive and selecting “Properties” and then “Disk Cleanup”.

The utility will conduct an initial analysis and show which files can be deleted. As a rule, in this case it will not be a very large volume. By clicking on “Clean up system files” one more stage of analysis will take place and the amount of freed up space will certainly be increased.

You should also check if the swap file is enabled. It is used if there is not enough memory for the programs to work and more is required than is physically available at the moment. in this case, the shortage will be compensated for by free space on the hard disk. You need to open the “Control Panel”, then “System”.

READ  How to clear phone memory Samsung j3 2017

After we open “Additional system parameters”.

Next, click “Options” in the “Performance” section.

Switch to the “Advanced” tab.

In this window, you can control the size of the paging file. It is recommended to set its size automatically.

In the event that there is not enough memory due to another program or many processes, then it will be logical to understand which of them. In this case, you can use the Task Manager by sorting the processes by the “Memory” column in the “Details” tab.

After analyzing the processes in the list, you can decide what to do with them. This can be either a regular mode of operation (for example, during an update), or an abnormal (internal application failure), or it can be malware at all. In any case, checking for malicious objects will not hurt. Be that as it may, if a certain application causes an error that there is not enough memory, then it is recommended to contact the support of this software to eliminate the negative effects.

Why not all RAM is available on Windows 10?

After upgrading to Windows 10, many users started complaining about the problem of using an incomplete amount of RAM. For example, let’s take a case from the Microsoft forum. Installing 6GB of RAM in Windows 10 32 only showed 3.92GB. The entire amount of RAM was inaccessible, or rather, the system simply did not see it. In some cases, reinstalling the RAM strips in places and cleaning the contacts helped to solve this problem. However, in a number of cases it was not possible to solve this problem.

If you are faced with a situation where not all RAM is available on Windows 10 and you have not swapped the modules, you should follow these steps:

If Windows 10 does not see the full amount of RAM, it is worth removing the strips from the slots and swapping them. We also recommend cleaning the contacts of the RAM modules. To do this, take a rubber band and carefully wipe the dirt off the contacts.

If you insert the modules incorrectly, the post will pass when the PC boots. You will need to return the modules to their places and restart the computer. After loading Windows 10 32 bit, you need to download the MemTest86 program and check the operability of the RAM.

If everything is in order with the modules, but Windows does not see all the RAM, it is possible that you are using an old version of the motherboard firmware and you need to update the BIOS, as well as check some of its parameters.

  • The first BIOS parameter that is responsible for the stable operation of RAM is memory reallocation. In different firmware versions, this section may be called differently (Memory Hole Remapping, H / W DRAM Over 4GB Remapping, Hardware Memory Hole). Therefore, it is worthwhile to study in detail the instructions for the board or find a description for the version of the BIOS used.
READ  How To Connect A Computer To A Laptop Instead Of A Monitor

The memory reallocation function transfers the address blocks used by the expansion cards to the address space beyond 4 GB. Thus, it is possible to increase the amount of RAM (otherwise Windows 10 will see 3-3.5 GB). To fully support such a volume, it is necessary to use 64-bit processors and 64-bit versions of the OS (or server versions of 32-bit operating systems that allow expansion of physical addresses PAE). If the amount of RAM is less, be sure to disable this option (Disabled), as there may be problems with the operation of the RAM. Enabling memory reallocation. value Enabled.

  • Memory options for AGP video aperture are the amount of memory shared by the system with the video adapter. It is needed to display textures and render images. This amount of memory may not be used by the system if it is blocked by the video adapter. There is only one way to enable it: boot into BIOS, select AGP Aperture size. The default values ​​are 32 MB, 64 MB, 128 MB, and Auto. We look at how much memory the video card has and set the desired value by value. This is often 128 MB. However, you can try each parameter to see which one gives the best result.

After making all the changes to the BIOS settings, you need to boot into Windows and check if the entire amount of RAM is visible. If the system still does not see the RAM, it is worth trying to insert other modules into the slot. Perhaps the old RAM strips are out of order or have defects.

For information on why the system does not see all the RAM and how to fix it, see