Laptops and Tablets • Recommendations and advice


No iTunes iPhone access rights

Table of Contents

AppleMobileDevice service not running

There is a more complex problem due to which the program does not see the mobile device. This problem is related to AppleMobileDevice. This is the most frustrating problem because it cannot always be solved at once.

First, let’s take a look at how you can identify the problem with the AppleMobileDevice. To do this, you need to disconnect the USB cable from your smartphone and on your computer go to Control Panel = Uninstall Programs, and then try to find the “Apple Mobile Device Support” component. If successful, we restart it (instructions below), if the component is not found, then:

  • Uninstall programs or components = “iTunes”, “QuickTime”, “Apple Software Update” and “Apple Application Support”;
  • Reinstall iTunes.

To restart the AppleMobileDevice service, you need to do a few simple steps:

  • Go to the “Services” folder using the following path Control Panel. Administration;
  • Find the service we are interested in and restart;
  • Connect device.

Error while syncing with iTunes

So, why the program can give an error when syncing with the iPhone 4s after a seemingly successful connection of your device. Here the reason may lie both in the PC and in the device itself and the programs that were recently installed on it.

First you need to check if the latest version of iTunes is on your PC, if not, then you need to update iTunes, and then restart your computer and iPhone 4s. If that didn’t work, then maybe the reason lies in recently installed applications. Try to find those and delete, then try to connect again.

If iTunes still does not see the device when your iPhone is syncing, you can assume that the culprit is a malfunction in the computer and you can try to delete all temporary files that may interfere with proper operation. To do this, we need to clean two folders from the contents:

  • C: \ Users \ Username \ AppData \ Local \ Temp
  • C: \ Windows \ Temp

To successfully search for these folders, you must have the “show hidden files, folders and drives” function enabled. After all the changes, do not forget to reboot. Well, another reason why iTunes might not see the iPhone has been eliminated. Try to sync again with “tuna”.

iTunes does not see the iPhone. looking for reasons

If you have a problem that iTunes does not see the iPhone, is it worth raising a panic? Of course not, there must be some simple explanation for this. Today we will try to figure it out.

There are four simple explanations for why iTunes doesn’t see your iPhone:

  • Faulty cable or connectors;
  • An error occurs while syncing iPhone and iTunes;
  • AppleMobileDevice crash;
  • Poor flashing of a mobile device.

Now let’s look at each case in more detail.

Problems with the physical state of the connection

To synchronize the device with the “tuna” was successful, it is worth checking the connection for mechanical problems.

  • There may be dust or dirt in the slot where you are plugging the USB cable that interferes with normal connection. Also, the problem with the fact that iTunes does not see the iPhone may lie in the breakdown of the power connector, which is a very vulnerable point on the device. There may be a lot of reasons why a breakdown could occur: from mechanical damage to liquid ingress.

Try plugging the cable into a different USB connector or cleaning the power connector with alcohol and cotton wool wrapped around a flat piece of cardboard (1mm5mm) for easy access to the contacts (depending on the condition of the connectors, both options may be useful).

  • It may be that the USB cable is damaged or absolutely not suitable for transferring information from a computer to a device (intended only for recharging).

Make sure your cord is original and free from mechanical damage. Alternatively, you can try to reconnect using a known good cable.

Before connecting, remove the cover, additional unit and any other elements that may disrupt the full contact of the cable with the connector.

It is also worth checking the status of the drivers that ensure the connection of the device to the PC, the sequence of necessary actions is clearly presented in the following video.

Poor flashing of a mobile device

In this situation, the problem may be hiding in the “var / mobile / Media” folder on your iPhone. By deleting this folder, the problem should go away, although deleting it will also delete all your Photos and Videos captured with the camera. Therefore, if you value the files that are on your iPhone, make a back-up before deleting anything.

It will be possible to free the “var / mobile / Media” folder from information using the iFunBox or iTools programs (using the File Manager). Next, you need to restart the iPhone and sync. If you are successful, you will be able to recover all lost files from a freshly created backup.

So, now you know why iTunes may not recognize the device, and what actions can be taken in this case.

Do not forget to read the Комментарии и мнения владельцев, there is also a lot of useful information. If there is no answer to your question, and there is an answer to later Комментарии и мнения владельцев, then the answer to your question is contained in the article, respect someone else’s time.

factory reset iPhone without password using iTunes / recovery mode

In case you have previously synced your iPhone or iPad with iTunes and have not rebooted your device since the last connection to iTunes, iTunes can still remember your password and allow access to the disconnected iPhone. Then you can use iTunes as a fix to restore iPhone to default. To learn how to factory reset iPhone without password via iTunes follow the below method.

Open the latest iTunes and connect your iPhone to your computer.

If the connection is established, on the Summer tab, click Restore iPhone and then Restore in the confirmation pop-up window to reset iPhone to factory state.

itunes, iphone, access, rights

If iTunes asks for a password to access and you’ve never synced with any computer, try putting your iPhone in recovery mode to skip this step. To put iPhone into recovery mode, see Step 2 of Part 1.

You can now see a pop-up in iTunes that says “iPhone Name Problem iPhone” needs to be updated or restored. “.

Select “Restore”. After completing this process, your iPhone will be reset to factory settings.

Then follow the onscreen instructions to restore iPhone using the latest iTunes or iCloud backup.

Best Way to Factory Reset iPhone without iTunes and Password

UkeySoft Unlocker works similarly to the iPhone Eraser tool. But it’s better and people prefer it because it doesn’t require you to enter a password: Apple ID password or iPhone lock screen password. In this case, even if you forgot them, you can reset your iPhone to factory settings. In addition, it is able to unlock iPhone without password and remove Apple ID from any activated iPhone / iPad if Find My iPhone is disabled.

  • Factory Reset iPhone without Password and iTunes.
  • Remove iPhone Lock Screen Passcode Easily.
  • Unlock Apple ID without password from any activated iPhone / iPad / iPod touch.
  • Unlock iPhone when locked, disabled, stuck in recovery mode / Apple logo screen / black screen.
  • Unlock Used iPhone Without Passcode.
  • It can be used on all iPhone, iPad and iPod touch; it can be used on all iOS versions including iOS 13.5.

Reset iPhone settings without password via iCloud

If you have synced your iPhone with iCloud instead of iTunes and Find My iPhone is enabled on your locked / disabled device, you can reset your iPhone / iPad using Find My iPhone on

Click All Devices, then select the device you want to do a factory reset.

Click “Erase iPhone” to reset iPhone settings without passcode.

reset iPhone without iTunes but with password

If you know the passcode on your iPhone lock screen, you can easily factory reset your iPhone with a passcode. Now open your iPhone and try erasing all your data and returning it to factory default settings without connecting it to your computer.

READ  How to turn off paid subscriptions on iPhone 6

On your iPhone go to “Settings General”.

Scroll down under general settings and select “Reset”.

Here you will see a list of the different reset options available. If you want to factory reset your iPhone, tap on the “Erase All Content and Settings” option. Otherwise choose what you need.

IPhone Factory Reset Steps without iTunes and Password

Run UkeySoft Unlocker Install and run UkeySoft Unlocker software on your computer, then select “Unlock Lock Screen with Password”.

Then, connect your iPhone to your computer via a USB cable. Click “Next” to continue the process.

Put iPhone into recovery mode On iPhone 8 / X / XS / 11 or later, press the volume up button, then the volume down button, then press and hold the power button until the recovery mode screen appears.

On iPhone 7 and iPhone 7 Plus, quickly hold down the Power button, then swipe the Power off slider to the right. Press and hold the volume down button until the recovery mode screen appears. On iPhone 6s or older, press and hold the Power button, then swipe the Power off slider to the right. Then press and hold the Home button until the recovery mode screen appears.

Now the program starts downloading the firmware package for your iPhone. When the download is finished, click the Start button and this UkeySoft Unlocker will start to remove everything from your iPhone / iPad, including your screen lock password.

Start Removing Passcode from iPhone 8 As you can see unlocking removes your iPhone’s screen passcode.

After removing the password, your iPhone will restart and you will be greeted with the classic “Hello” screen. Click Finish to finish.

Factory reset iPhone without password successfully.

How to Factory Reset iPhone without iTunes and Password

You might be wondering how to factory reset an iPhone or iPad, you are definitely not special. There are many cases where iPhone users want to restore their iPhones to factory settings, here we list some of the possibilities:

You want to sell your iPhone. You have forgotten your iPhone screen lock password. You have a used iPhone and you don’t know the password. iPhone is disabled and locked by multiple erroneous attempts. You are planning to give an iPhone to your loved ones. Your iPhone is not responding. Your iPhone is stuck in recovery mode, Apple logo screen, black screen of death and you can’t enter your password.

When it comes to factory reset iPhone, there are many ways to accomplish this. In this article, we have listed various options to help you restart your iPhone. If you don’t want to use iTunes or password, this article will guide you to reset iPhone without iTunes or password.

Reset iPhone Settings without iTunes via UkeySoft FoneEraser

UkeySoft FoneEraser is one of the best iPhone erasing tools. As mentioned earlier, it works similarly to UkeySoft Unlocker, but it requires your screen password to connect to your computer. Why is it on the list? UkeySoft FoneEraser, as the name suggests, is a tool to erase iPhone, iPad, iPod touch. It supports 4 erasing modes that can be used to restore your iPhone with one click, delete any type of data (like contacts, SMS, photos, videos, call logs, notes, etc.), optimize your iPhone with one click, and improving productivity. and cleaning up application fragments, etc. All deleted files cannot be 100% recovered. If you are planning to sell your iPhone, UkeySoft FoneEraser is perfect. Follow Instructions to Reset iPhone Permanently Without iTunes.

Features of UkeySoft FoneEraser:

  • 4 erase modes available, 1-Click Free Up, Erase All Data, Erase Personal Data, Erase Fragments.
  • Factory reset iPhone takes just one click
  • Selective cleaning of personal files, including contacts, text messages, albums, videos, etc.
  • Optimize your iPhone with one click, clean up junk files and app cache.
  • Erase fragments of your application directly.
  • Back up photos and videos to your computer to free up storage space.
  • Can be used on all iOS devices and is compatible with the latest iOS 13.5.

Recover iPhone Data from iTunes / iCloud Backup

Besides restoring iPhone from the setup interface, iPhone Data Recovery can help you restore iPhone data from iTunes backup or iCloud backup easily and easily. Download and install the software on your computer.

Step 1 Launch iPhone Data Recovery and connect your iPhone to computer via USB cable.

Step 2 Select Recover from iTunes Backup File and scan your device after choosing the correct iTunes backup file.

Step 3 Preview and select iPhone files. Click Recover iPhone Data.

How to Fix Disabled iPhone without iTunes (Factory Restore)

When the disabled iPhone is stuck in “try again in X minutes”, you will have to wait 1/5/15/60 minutes and enter the correct passcode to unlock the iPhone.

IOS System Restore is a tool that can help you do this. First, you must download and install it for free on your computer.

Step 1 Run iOS System Recovery

Run this disabled iPhone fix program on your computer. Connect your iPhone to it with a USB cable. Click ” Tools” in the left column and then on the “iOS System Restore” tab in the preview window. After that, click the start button to start fixing disabled iPhone.

Step 2 Put iPhone into Recovery Mode or DFU

Press the Question button and follow the instructions to turn iPhone into recovery mode or DFU. Here we put a disabled iPhone into DFU mode.

Select the correct iPhone model and click Download to download the plug-in for your refurbished device. When the plugin download is complete, this software can automatically fix the iPhone blue screen problem and return it to normal.

How to Reset Disabled iPhone without iTunes (Wipe All Content and Settings)

If your iPhone reminds you that “iPhone is disabled. Connect to iTunes ”, you have no choice but to erase and restore your iPhone. Hopefully you’ve recently backed up your iPhone to iTunes or iCloud, otherwise you’ll have to erase all data and start from scratch. We Show You How To Fix Disabled iPhone With Or Without iTunes.

How to solve iPhone can’t connect to iTunes (2020)

Here, we would like to wholeheartedly recommend you iPhone Data Drawing, the authoritative iOS data erasing tool. Reliable program can permanently and completely erase your iPhone data.

Step 1 Connect your iPhone to your computer with a USB cable. It will detect your device soon.

Step 2 Select the erasing level (Low, Medium and High). “High Level” is recommended here.

Step 3 Press the “Start” button and get ready to erase all data on your iPhone.

After doing this, all data on your iPhone will be clearly erased.

How to Unlock and Bypass a Disabled iPhone (Wipe Current Passcode)

First method. This is the recommended way to unlock a disabled iPhone with Aiseesoft’s Unlock iPhone.It is the best iPhone unlocking tool that can unlock various types of screen lock on iOS devices without passcode, including 4 digit, 6 digit, Touch ID, Face ID, etc. D.

  • Unlock and Bypass Disabled iPhone, iPad and iPod.
  • Wipe 4-digit, 6-digit, customizable digit, Face ID, Touch ID, etc.
  • Erase Locked iPhone from Apple ID and Screen Time Limits.
  • Compatible with iPhone 12/11 / XS / XR / X / 8/7, iPad, etc.

Step 1 Launch Aiseesoft iPhone Unlocker

Download password cleaner for free and launch iPhone Unlocker on your computer. Select Wipe Password Mode.

Step 2 Connect your iPhone to your computer with a USB cable

Click Launch Click the button in this software and then connect your iPhone to your computer with a USB cable.

Confirm the discovered iPhone information and change it if it is incorrect. Click Start and this software will start downloading the firmware package.

Step 4 Wipe iPhone Passcode to Fix Disabled iPhone

When the firmware is loaded, click Unlock to erase your screen password. Then you need to enter 0000 to confirm the unlock. After a few minutes, the password on your iPhone will be deleted.

Please note that erasing iPhone password will erase all your data on your iPhone and your iPhone will be updated to the latest iOS version. So, just back up important data on your iPhone in the first place.

How to Unlock iPhone without Computer (iCloud Erase iPhone)

Without a computer or iTunes? Then just let iCloud help you unlock your disabled iPhone by deleting it remotely.

Play on another available phone and sign in to iCloud with Apple ID and password. Click Find My iPhone and choose Disable iPhone from the All My Devices menu. Erase iPhone tab in the upper right corner of the map. All content and settings will be deleted and you can set up your iPhone again.

How to fix a disabled iPhone with iTunes (DFU or Recovery Mode)

Besides third party software, you can also use iTunes to fix a disabled iPhone.

iTunes offers you 2 ways to unlock a disabled iPhone by deleting all settings and content from iPhone via DFU and recovery mode.

Recover Disabled iPhone with iTunes

Step 1 Connect your iPhone to the computer where it was synced earlier and launch iTunes.

Step 3 Click the Restore iPhone button.

Then your iPhone will reboot and allow you to enter the setup interface. You can restore iPhone from iTunes backup or iCloud backup.

Enter iPhone Recovery Mode to Recover Disabled iPhone

Step 1 Connect your iPhone to your computer and launch iTunes.

Step 2 Press and hold the Power button and Home button at the same time until the iTunes logo appears on the iPhone screen, which means the device has forcibly entered iPhone Recovery Mode.

Step 3 iTunes will inform you, “There is a problem with the iPhone that requires updating or restoring it.” Choose Recover to erase all content and settings on your iPhone. Later, you can restore iPhone from iTunes backup or iCloud backup.

How to fix a disabled iPhone with or without iTunes

There are several reasons the iPhone is disabled and try doing it after 1/5/15/60 minutes.

READ  How to see battery capacity on iPhone 5s

Snoopers. Some inquisitive friend, family member, or even a stranger might try to unlock your iPhone, but he or she is unaware of the limited password attempts.

Children. Children love to press buttons when they receive an iPhone, so sometimes the device can be disabled by children.

yourself. You can forget your iPhone passcode and won’t unlock it. Or you can accidentally activate the iPhone screen in your and accidentally enter the passcode multiple times.

How to fix the problem and bypass a disabled iPhone to use it normally.

This is what we’ll talk about in this post, 6 Ways to Unlock a Disabled iPhone with and Without iTunes.

  • How to Unlock and Bypass a Disabled iPhone (Wipe Current Passcode)
  • How to Fix Disabled iPhone without iTunes (Factory Restore)
  • How to Reset Disabled iPhone without iTunes (Wipe All Content and Settings)
  • How to fix a disabled iPhone with iTunes (DFU or Recovery Mode)
  • How to Unlock iPhone without Computer (iCloud Erase iPhone)
  • Bonus tip to fix a disabled iPhone
  • Frequently Asked Questions to Fix Disabled iPhone

Return iTunes to Normal Mode

I put my iPhone into recovery mode and tried to update to the latest version of iTunes, but I got the error message “iPhone could not be updated. An unknown error has occurred (45). ‘What’s wrong with my phone? How to fix this problem with iTunes?

This is a common case where you get iTunes error 45 when trying to update or restore iPhone using iTunes. Many iPhone users have encountered this problem and reported to the official Apple company. Most people wonder why they are suffering from this error. Here we list some curses that lead to this iTunes error.

A. iTunes is old, you should update to the latest version. B. If your iPhone has corrupted firmware, you will get this error when updating / restoring iPhone. C. Some applications or programs that may interfere with the update / restore process by communicating with it.

Fix iTunes Error 45. Update iTunes You can try this method to fix iTunes error 45, check and update iTunes to the latest version. To make this work you can follow these steps.

Open iTunes on your computer.

click “Help” and select “Check for Updates”.

if a new version is available, a popup will appear. Click on Download iTunes.

Then just follow the onscreen instructions to update iTunes to the latest version.

If iTunes error 45 can be fixed after updating iTunes to the latest version. You can try the second way to get iTunes back to normal.

Fix iTunes Error 45 With iTunesFix Tool

If you want to fix iTunes error 45, try the iTunesFix tool and it won’t disappoint you. It can fix all iTunes errors and get iTunes back to normal without data loss. Solve iTunes can’t install / update, fix iTunes can’t connect to iPhone, fix iTunes can’t backup / restore, etc. Solve iTunes can’t start due to error 2, error 13, error 56, error 1002, etc. Fix iTunes was not installed correctly, the installer did not have enough rights, etc. Clean iTunes files or uninstall iTunes completely.

How to fix iTunes Error 45 on Normal

Install and Run iTunesFix on PC Firstly, please install and run iTunesFix on your computer.

iTunesFix will automatically detect your iTunes and related components. If no problem, you will be taken to his home interface. If your iTunes or components are lost or damaged, it will show you the details.

Step 2.Repair iTunes Component Problems Click on “Repair” And Fix iTunes Component Problems.

Step 3.Fix iTunes Error 45 If there is no problem with your iTunes components. You can select other modes such as Fix iTunes Connect Problems, Fix iTunes Install / Update Problems, Restore Backup / Restore Errors to fix iTunes error 45.

Find Apple ID

This feature can also help restore access to the device if you do not know the associated Apple ID, but there is no activation lock. With its help you can:

  • Find out which Apple ID was originally used. after that you can contact the previous owner and ask him to provide a password.
  • Restore access to your Apple ID account through the official Apple website.
  • View a list of all Apple ID accounts used on this device.

To get started, click Start Jailbreak.

Important: as in the first case, you need to jailbreak your device to use this function. The process is automatic and you don’t have to do anything manually. You can read about what jailbreak is, what it gives and why you shouldn’t be afraid of it here.

How to unlock iPhone without access to linked Apple ID

Sometimes, before selling used Apple technology, users forget to unlink their Apple ID or disable Activation Lock. In this case, it is impossible to use the device: the smartphone will require you to enter the login and password of the account that was used to activate the device. If you purchased a locked iPhone, and the previous owner does not get in touch or did not remember the Apple ID login and password, the problem can be solved without contacting an Apple Service Center.

There are special programs for this. One of them is a simple suite of AnyUnlock utilities. iCloud Activation Unlocker, a new offering from popular iMobie developers. With its help, you can return access to a device purchased from an unscrupulous seller (or when you yourself have forgotten your login and password. this often happens if this is a spare phone that has been idle for a long time).

To reset the lock, the first step is to download AnyUnlock. iCloud Activation Unlocker from the official developer site. At the time of this posting, the program is only available on macOS. Here are its main features, presented as three separate tabbed utilities:

Bypass iCloud Activation Lock

If you can’t access your device due to iCloud lock due to Find My iPhone settings that you can’t turn off, and you can’t restore access to your Apple ID, this option will help. Here’s what to do:

  • Connect your smartphone to your computer.
  • Open AnyUnlock. iCloud Activation Unlocker and go to the Bypass iCloud Activation Lock tab.
  • Click Start.
  • Confirm that you are ready to jailbreak the device and accept the terms of use of the application by ticking the corresponding checkbox.
  • Click Start Jailbreak.
  • The program will automatically download the necessary tools and flash the device. After that, it will be ready to bypass the lock.
  • Click Bypass Now.

Wait until the end of the procedure and you’re done. you can use the device again!

Device Verification / iDevice Verification

A useful utility to use when buying an iPhone, iPad or iPod touch handheld. It provides detailed information about the gadget, including data on the health of the battery, the presence of a lock by Apple ID. over, it can be used to check if any parts have been replaced on the connected device.

For example, in the image above, you can see that no unauthorized replacement of components was detected in the tested iPhone 7, the battery capacity is 68%, and the protection by Apple ID is enabled. It also indicates the number of charging cycles and whether the jailbreak is installed: thanks to this verification, the seller will not be able to deceive that the smartphone has “hardly been used” if in fact it has been recharged more than a thousand times. All important inconsistencies and problems are highlighted in red for user convenience.

AnyUnlock. iPhone Password Unlocker

This is another set of utilities from the same developers that will help you unlock your device if you forget your passcode or your smartphone screen is damaged, making it impossible to enter a password. It will also help you remove or recover a password from an encrypted iTunes backup or remove Screen Time restrictions. Read more about AnyUnlock. iPhone Password Unlocker in our review.

Unlocking features

If you decide to remove iCloud lock by jailbreak, this imposes some restrictions on the further use of the device. In particular:

  • You will not be able to use SIM cards for calls or mobile internet.
  • You will not be able to log in under the new Apple ID in the smartphone settings.

In this case, you will have the opportunity to use the new Apple ID account in the App Store and iTunes to download content.

It should be noted that the program is intended for personal use only. Cases of using such software for commercial or illegal purposes may be prosecuted.

Enter Recovery Mode on iPhone 8, iPhone 8 Plus, iPhone SE (2nd generation), iPhone X, iPhone XS, iPhone 11, or iPhone 11 Pro

If iTunes is open on your computer, close it. Finder your iPhone to your computer using a USB cable. iTunes is open. Press and release the Volume Up and then the Volume Down button. Then press and hold On Off until you see the recovery mode screen.

How to Unlock a Disabled iPhone Using iTunes or Finder

Justin Sabrina Updated on January 27, 2021

If you enter the wrong password 10 times, you will receive the message “iPhone is disabled, please connect to iTunes. In this case, the only way to unlock the disabled iPhone. is to restore it. You can use iTunes to restore iPhone, which is the easiest and free method to unlock iPhone.

Unlock your disabled iPhone with iTunes. Just follow these simple steps to learn how to unlock locked or disabled iPhone using iTunes. Connect your device to your PC or Mac. Allow iTunes to sync your device and create a backup. After the sync and backup is complete, select “Restore” your device.

Your iPhone will be restored and all iPhone data will be erased.

If you’ve tried the wrong passcode repeatedly, your iPhone is disabled or locked. As a result, you can turn iPhone into recovery mode and connect it to iTunes, after which iTunes will detect your iPhone in recovery mode, in this case, use iTunes to unlock iPhone through device recovery.Also, if you have not connected your iPhone to iTunes before. iTunes will ask you for a password to “trust this computer”, but you forgot the password on the screen.

READ  How to View Deleted WhatsApp Messages on iPhone

If the message asks for your device password or Trust this computer, you need to enter the password to unlock iPhone backups (used when encrypting backups). If you’ve forgotten your password, you won’t be able to unlock your iPhone using iTunes or Finder.

However, how to unlock a disabled iPhone? Let’s discuss this issue together. You will learn how to unlock a disabled iPhone with or without iTunes / Finder.

Recover Disabled iPhone with iTunes or Finder

After putting your iPhone into recovery mode, iTunes will detect your iPhone and display a warning that iPhone is in recovery mode, follow the below step to restore your iPhone using iTunes.

iTunes will open new windows, when you see the Restore or Refresh option, select “Restore”.

To restore disabled factory settings and remove the password, click Restore iPhone. “.

Finder or iTunes will download the IPSW firmware for your iPhone, the whole download process will take over 15 minutes.

Once the software download is complete, Finder or iTunes will start iPhone recovery and remove the passcode Please wait until the end of the recovery process. Your iPhone will restart and exit recovery mode. then set up and use your iPhone.

Enter Recovery Mode on iPhone 6s or earlier or iPad

Disconnect your iPhone, iPod touch, or iPad if it’s not already turned off. Press and hold the power button on the right side (iPhone 6 or later) or top (all other iPhones, iPods and iPads) for 3 seconds.

Swipe to turn off the confirmation slider on the right.

Press and hold the Home button on your iPhone, iPod touch, or iPhone. Connect your iPhone, iPod touch, or iPad to your computer and make sure iTunes is running. Release Home button when you see the iTunes Connect screen.

Enter Recovery Mode on iPhone 7 or iPhone 7 Plus

Turn off your iPhone 7 if it’s not already turned off. Press and hold the power button on the right side.

Swipe the screen to power off the confirmation slider on the right.

Press and hold the power button, slide the confirmation slider Press and hold Volume Down on your iPhone 7. Connect your iPhone 7 to your computer with a USB cable and make sure iTunes is working. Release Volume Down when you see Connect to iTunes screen (iPhone 7 in recovery mode).

Put iPhone into Recovery Mode, iTunes Detects It

When you cannot access the system, the recovery mode allows you to restore your iPhone to iTunes. Let’s Teach You How To Enter Recovery Mode On Different iPhone Models.

How to Unlock a Disabled iPhone Using iTunes or Finder?

iPhone disabled? To fix “iPhone is disabled. Connect to iTunes “, you need to put iPhone into recovery mode first.

This is the worst case for iPhone disconnection as it requires the iPhone to be connected to the computer in order to access it again. I hope you have recently made a backup on this computer and hopefully you have memorized the actual iPhone password, otherwise you will have to erase the device and lose all data on it.

How to Fix iTunes could not connect to this iPhone, you do not have permission 2020

Updating the Apple Mobile Device Driver

If the driver is displayed in the manager, then to solve the problem with detecting the smartphone, you need to update it.

This is done very simply without an Internet connection. I will give an example on Windows 10, but for Windows 7 or XP, the update is carried out in the same way.

In the task manager we find the section “Portable devices”, we see there “Apple iPhone”.

If there is no Apple iPhone item in Windows Device Manager, you need to connect your smartphone to your PC using a USB cable. If it doesn’t help, reinstall iTunes.

Open “Apple iPhone”, go to the “Driver” tab, click the “Update driver” button.

Choose manual update with search on your computer.

In the next window, you need to select the driver from those installed on the computer.

Next, select the USB MTP device and click “Have Disk”.

It remains to indicate the location where the driver is located. To do this, in the next window, press the “Browse” button and go to the folder:

Program Files / Common Files / Apple / Mobile Device Support / Drivers

This folder contains a driver file named usbaapl64.inf or usbaapl.inf. Select it and install.

Now, disconnect the USB cable from the iPhone and restart your computer. Then connect the device to your PC and open iTunes. The problem will be solved.

Checking Apple Mobile Device USB Driver

When a Windows computer does not see an iPad or iPhone, be sure to check if the Apple Mobile Device USB driver is installed. When you install iTunes, it should install automatically. Its absence prevents Windows from seeing a smartphone or tablet.

Open Device Manager by right-clicking on the Start Menu.

Find the section “USB Controllers” in the manager and open it. Inside must be the Apple Mobile Device USB driver.

In the case when “Unknown device” is displayed instead of the driver, connect the smartphone via another cable or to another computer. If that doesn’t work, bring your iPhone, iPod or iPad to the service.

Why can’t my computer see my iPhone, iPod or iPad via USB

A notorious situation: you connect an Apple smartphone or tablet to a computer, it does not recognize it, but it charges. At the same time, iTunes does not see the iPhone, iPad, or iPod, or an unknown error or error with the code 0xE is displayed.

The most common problem encountered by owners of iPod classic, nano and shuffle, iPhone 4, 5s, 6 and 7 when connecting them to Windows 10 or any other Microsoft operating system. Owners of computers on macOS face this much less often.

Apple uses iTunes (or Finder on a Mac with macOS Catalina) to manage, update, and restore iOS and iPadOS devices. Below we will explain why the computer does not see the iPhone via USB and what to do to solve the problem.

Checking the connection

Make sure the problem is not a cable issue before proceeding with the software troubleshooting steps.

  • Make sure the cable is securely connected to the iOS device and to the computer.
  • Try plugging the cable into a different connector on your Mac or PC.
  • Check your Lightning or USB-C port for dirt and dust. Dust often clogs into the connector, which interferes with contact.
  • Connect your iPhone to your computer with a different cable. If this helps, you just need to replace the cable.

If, after completing these steps, your iPhone does not connect to your computer via USB, let’s move on.

Troubleshoot iTunes on Windows

If your Windows computer and iTunes can’t see your iPad, iPhone, or iPod when connected, follow these steps:

  • Turn off your PC and iPhone, then turn them on again and connect with a cable.
  • Make sure that when connected to a PC, your iOS or iPadOS device is unlocked and displays the Home screen.
  • Update iTunes for Windows to the latest version. To do this, open iTunes, select “Help”. Check for Updates.
  • When you connect your iPhone to your computer, pay attention to the notifications on your phone. Click Trust This Computer. To see the notification, you need to unlock your smartphone.

Ignoring this window is the most common reason why iPhone won’t connect to computer.

If you see the question “Trust this computer?” again, you may not have iTunes installed at all. Download the latest iTunes for Windows from Apple’s official website and install on your PC.

Please note that you do not need to put your device into DFU recovery mode when performing any of these steps.

If the above does not help, you need to check the Apple Mobile Device USB Driver.

Troubleshoot iTunes for Mac

If your Mac can’t recognize your iOS or iPadOS device, you need to do the following:

  • Check the USB connection, inspect the cable connector for dust, try using a different USB port and a different cable.
  • Make sure you click the Trust button on iOS when connecting to your Mac (Trust This Computer dialog box).
  • Reboot your iOS device.
  • Reboot Mac.
  • Check for software updates on your Mac. For example, you need to update the operating system to macOS Catalina or install a local update so that the Mac connects to the iPhone on iOS 13. If necessary, you will see a corresponding message on the computer screen.
  • If you have an antivirus for Mac installed, disable it for the duration of the connection. This could be the reason why the Mac computer or MacNook laptop does not see the iPhone via USB.

Finally, check if your iPhone, iPad or iPod is detected on Mac. To do this, in the top menu, click on the apple and open the “About this Mac” item.

In the “Hardware” section, open the USB section and your iPhone, iPod or iPad should be displayed on the right side of the window.

If your device is not displayed, all that remains is to contact Apple technical support or service.

We hope this guide helped you solve iPhone, iPad or iPod display problems in iTunes. If you have any questions, ask them in the Комментарии и мнения владельцев, we will try to help.