Laptops and Tablets • Recommendations and advice


Laptop Won’T Boot What To Do

Overflowed startup

The longer and more actively the device is used, various programs are installed, the more applications get into startup. It seems nothing bad, but over time, the system resources of the laptop are not enough to start all programs and services quickly enough. The situation is aggravated by the fact that some of THESE applications are rarely used and often unnecessary. To optimize startup, do the following:

  • Right-click the mouse or touchpad on the taskbar and select the term “Task Manager”;
  • In the new window, open the “Startup” tab;
  • VIEW all the programs on the list, and Disable which of them that you are NOT using (be careful, if you doubt the purpose of this or that program, check information about it on the Internet).

6 reasons why your laptop is slow

Have you started to notice that your laptop is very slow? Many users are faced with a SIMilar problem, which is often annoying and annoying. Don’t waste your nerves, return your device to its former performance with the help of our tips. Read below why the laptop is slow, loads everything for a long time, and how to deal with it.

Dust accumulation

If your laptop is equipped with an air cooling system and has been in operation for more than a year, you should think about preventive cleaning of internal components from dust. The fact is that over time, the radiator grilles and elements of the cooling system become covered with a layer of dust. This, in turn, leads to overheating of the laptop, as well as braking and freezing of the system. How to clean your laptop from dust, read this article.

The laptop does not meet modern requirements

Time does not stand still, and therefore every year more demanding programs, games and versions of operating systems appear. If your laptop is many years old, perhaps the reason for the slow operation is the poor technical characteristics of the device by modern standards. To solve the problem, you must either upgrade the system or purchase a new, more powerful laptop.

Damage by viruses

The presence of malicious software often provokes a situation where the laptop is slow. If you actively use the Internet, download programs from various sources, and at the same time you do not have a good antivirus program installed on your device, then sooner or later you will undergo a virus infection. Sometimes it is difficult to immediately notice that viruses have appeared on the laptop, but if the laptop suddenly starts to work slowly, this is a sign of a possible infection. How to deal with malware, read here.

Incorrect power settings

There are several operating modes for laptops:

  • Energy Saving. Used on battery power, low system performance, low screen brightness, etc.
  • Balanced. a balance is maintained between performance and power consumption;
  • High performance. characterized by an increased microprocessor frequency, bright display, etc.

When you plug in the power cord, make sure the system automatically switches to balanced mode or high performance mode. After all, if the power saving mode is set, the laptop will run much slower.

Increased fragmentation Hard disk

If your device uses an HDD, then over time the information stored on it is fragmented, which slows down the system when working with data. To avoid this, it is recommended to periodically check the status of the Hard Disk and perform defragmentation. To analyze the disk and run defragmentation, do the following:

  • Depending on the version of the operating system, go to “My Computer” or “This Computer”;
  • Right-click on the hard drive and select “Properties”;
  • Open the “Service” tab;
  • Click the “Optimize” or “Run defragmentation” button;
  • In the new window, select the main hard drive and use the “Analyze” button;
  • If the fragmentation rate is above 10%, defragment the disk.

Despite the release of the new Windows 10 operating system, many users have remained faithful to the previous [. ]

Over time, the computer accumulates Not only a lot of programs and files, some of [. ]

Performance issues, frequent freezes and glitches are what [. ]

The basic settings of the Windows 7 operating system are optimal and therefore slow down the speed [. ]


There is a process of cleaning from dust and dirt. The rest will be mastered with your help!

Thank you very much! The council helped, there was a Balanced regime. When installed, High performance is now fast.

Whoever does not fumble about the answers, it is better to have it cleaned by a specialist. You struggle to disassemble it, and then, if you can, put it back together.

Inactive hard disk partition

This situation does not occur often, but you still need to talk about it, otherwise the article can be said to be cut off. Let’s give an example, after which you will understand what’s what.

Let’s say you have several Windows operating systems installed on your computer, which are installed on different hard drives. If you assign incorrect attributes to hard disk partitions, then you will have problems loading one or another version of Windows.

To check or fix this, you can use the Acronis Disk Director boot disk to change the partition attributes. So, download and burn the Acronis Disk Director boot disk and boot from it. How to do it? Insert the disc into the drive, restart the computer, and it will boot from the disc, which is in the drive. But before that, check your boot priorities. There should be a CDRom, just like installing Windows. We already talked about this in this article above.

When the program loads, pay attention to the checkboxes that are on the hard disk partitions.

In the image above, we can see that the checkboxes are on the second partitions of the hard drive. You need to make these checkboxes on the first sections. We got to practice;). You need to click on each first partition of the hard disk with the right mouse button and select “Mark as active”.

A message should appear where you click “OK”. This is what it looks like after the whole procedure:

Now it remains to click on the “Run” checkbox, wait for the operation to complete and restart the computer. Remember to remove the disc from the drive.

System recovery after command term

So, if the above described recommendations did not help, now we will restore the system using the command line. To open this window, click “Command Prompt”.

Then enter Bootrec and press Enter.

A list of commands will appear that can be used in this utility, now you need to enter: Bootrec.Exe / FixMbr and press Enter.

Now enter Bootrec.Exe / FixBoot and then hit Enter. Next, exit the utility, type exit and press Enter. Now you can try uploading to your account, as the restoration work is over.

You can also try updating the boot code by entering the bootsect / NT60 SYS command. Then exit with the Exit command.

If the above commands did not help you, then go to the command timeline and enter Bootrec.Exe / RebuildBcd. With this command you will scan your hard drive to find the systems installed on it.

When the scan is over, a list of installed operating systems on your hard drive will appear. In order to add it to the boot list, press Y and Enter. Upon successful completion of the operation, type Exit and press Enter.

So, with the command line, we figured it out. In principle, this should help your system start to boot.

System Restore

First of all, you can use the function that is in the installation disc “System Restore”. I will give an example of a Windows 7 system, but if you have a different system, then they do not think that you can NOT do it on your system. The names of the buttons may differ, but the principle remains.

So, for this procedure, we need a Windows installation disc or its image (you can download it on the Internet). If you do not have the opportunity to download the image or you have a disk, then write to me at or contact your friends who have already installed Windows on their own.

If you do not have a working floppy drive or it does not exist at all, then the article “Creating an installation USB flash drive for Windows 7” will help you create a bootable USB flash drive.

When you have a Windows distribution kit available, insert it into the drive and restart your computer. If the BIOS is configured for installation, then you will see the line:

When it appears, press any key.

In the event that it is not there or Windows boots as usual, then it is necessary to manipulate the BIOS. Namely, set the priorities for loading. Usually, the hard drive is set in the BIOS settings, since it is on it that your Windows is installed.

In order for the computer to start booting from the disk, which is in your floppy drive, you need to go into the BIOS and specify CDRom as the first device to boot. I already talked about this above, if you have not read this moment, then it’s time to do it.

So, you pressed any key, now a window will appear where you click “Next”.

In the next window you need to click “System Restore”.

This will search for installed systems. If you have one system installed, then accordingly there will be one operating system in the list. Select it and click “Next”.

Often at this stage, a message may appear in which you will be prompted to restore the system. If this message is displayed on your screen, then click “Fix and restart”. After that, try to log into your account.

READ  Laptop Battery Connected But Not Charging

If the message does NOT appear, then in the next window you select your system and click “Next”.

After that, a window will appear where you can choose how to restore the system.

Startup repair. automatic solution to the problem.

System Restore. you can use this method, but provided that this function has been enabled.

System Image Recovery. If You Have a Windows Image for Recovery.

Command Prompt. Using certain commands, you can revive Windows. Further, this method will be considered.

Now click on Startup Repair. Now you need to wait a bit for the utilities to try to automatically find the problem and solve it.

Safe Mode and Last Known Good Configuration

This is a must try! Restart the computer, press the F8 key continuously.

Attention! In Windows 8, entering Safe Mode is a little different, so it’s better to follow the link below for all the details. In the list that appears, we are interested in the item called “Last Known Good Configuration (optional)”. Select and press Enter.

How to enter Safe Mode on different systems:

What if the information above did not help you? We repeat the actions described in the previous paragraphs, but choose “Safe Mode”.

Next, you can make a choice: fix the problem that causes Windows 7 to load manually, or try to do it in semi-automatic mode. Usually I do everything manually, for example, if Windows cannot boot after installing the drivers, then I uninstall the drivers and try to boot. I think you understand that the manual method requires more familiar from you, so Windows offers you another option, which I will describe below.

If everything boots, go to the Start menu, Control Panel, System and Security. In the “Support Center” tab, click on the words “Restore the previous state of the computer”. See the Start System Restore button? Great, so you’ve come to the right place.

Now click it and follow the instructions.

Laptop Won'T Boot What To Do

Next, you will need to select a restore point. In my case, I am asked to select a point on the 23rd, and now the calendar is on the 29th. Therefore, you need to click on “Search for affected programs” to find out what actions you will need to perform after recovery.

So, you have familiarized yourself with the affected software during System Restore and now you can close this window. After closing the window, click “Next”.

If you have not been able to enter Safe Mode to restore Windows to work, then do not despair. Below we will analyze another method.

Note: at the very beginning, when Windows 7 was just coming out, there was one strange glitch, which may be yours. When you turn on the computer, the welcome screen follows and a black screen appears. As I remember, there seemed to be an arrow, but nothing else was visible. The treatment is very SIMple. go into safe mode and restart your computer as usual. After that I was able to log into my account without any additional manipulations with Windows.

Basic solutions when Windows refuses to boot

The topic that I want to discuss in this article is very popular and to tell about it in detail so that you understand how and what to do is not so SIMple. But still, I will try to describe Possible ways of what to do if Windows 7 does not boot on a laptop or computer. We will also find out why this could happen ?! The task we are facing is NOT an easy one, namely, to correct the current situation, but it is not necessary to be afraid. Just follow the clear instructions and you will be fine! Some points may be suitable for other operating systems, but I will focus on Windows 7.

Dear reader, if you really want to solve the problem, then I strongly recommend that you read the floor in full, and then draw some conclusions. I cannot tell you about all the nuances in one paragraph.

You may need to reinstall Windows

This option should be considered when you tried to revive Windows, but all attempts did not share results.

The very first thing that comes to mind for many, and for me too, is reinstalling Windows 7. But this method, you see, is very long, and if you are a busy person, then access to the computer should be almost constant. Reinstallation is suitable for those who have a lot of free time, or do not have time to figure out faster methods, or for those who will not be helped by any of the methods below to restore the Windows operating system.

I will not dwell on the installation of Windows in detail, since I wrote about this in my blog:

I also recommend looking. If you are installing Windows for the first time here.

Here’s a quick guide: since you DO NOT have access to the desktop, go to the BIOS, look for the Boot or Advanced BIOS Features tab, or do it yourself. Then already in it we find the term “1st Boot Device”, Set the value of the CD-ROM. What have we done? And what we did is that now the computer will boot from the disk, which is installed in your CDRom, and not from the hard disk. After switching on, when the inscription “Press any key.” appears on a black background, press any button and enter the Windows setup wizard. Then follow the instructions on the screen.

You can read more about how to boot from disk in my article: “How to set boot priorities in BIOS”.

I decided to tell you about the installation at the very beginning, because if you were going to reinstall Windows, then perhaps this is some kind of sign to implement it))). But as I said at the very beginning, we will now try to bring your Windows back to life without reinstalling it.

Hardware problems, BIOS and viruses

HDD. If your system unit, or rather the hard drive, makes suspicious sounds: clicks or tapping, then there is a chance that you need to replace the hard drive. To make sure of this, you need to open the lid of the system unit, turn on the computer and listen to the hard drive. Also check the hard drive wiring. It is possible that the wires are disconnected and the computer cannot see the hard drive.

If you suspect that there is a problem with the hard drive, then you need to copy all important data to another medium. Otherwise, you may be left with them altogether.

BIOS. Go to BIOS settings and put the hard drive in the first place so that the boot starts from it. Above, we analyzed an example when exposing a CDROM, you do the same with a hard disk. Just do not forget to save the changes in the BIOS by pressing the F10 key.

The second way. you will not believe it, but it really works! Just go into the BIOS and, without changing anything there, exit, saving the changes, which in fact did NOT exist (pressed the F10 button). I personally once fixed a laptop to friends, and when they asked me how I did it, my answer was: “Magic and nothing else # 128521; “. So try it, suddenly everything will be much easier than you think.

Viruses. Sometimes viruses prevent Windows from loading. If there are viruses on your computer, then you need to check the entire disk for viruses. Here are the articles that will help you: “Checking for viruses” and “Will the antivirus withstand the blow or lose concentration?”.

Of course, if you check your hard drive for viruses, then you will need to disconnect it and connect it to a second computer, since in your case Windows will not boot. Or you can use special boot programs with which you can check your computer for viruses even if you cannot boot your Windows. Here are a couple of them: Kaspersky Rescue and Dr.Web® LiveDisk.

Attention! There are cases when after installing updates Windows 7 stopped loading! Therefore, you can try to uninstall the recent updates that were installed before the Windows boot problem appeared.

Important! If you see a specific error on your screen, then I recommend using the search in Google or Yandex. You can enter into the search Not only the error code, but also the words that are used in it. Thus, you will save your time searching for the problem and its solution.

Important! If the system unit beeps when turned on, then it is necessary to determine the problem by this squeak. Ask how? Here is an article for you on this topic: “Why does the computer” beep “when you turn it on and what are BIOS signals”.

That’s all I wanted to say. The article turned out to be great, and I sincerely hope that at least one of the methods I have described helped you.

He says a lot, but there is some useful information for you:

Laptop won’t turn on at all

  • The first thing we should pay attention to is the power supply. Take a close look, is it plugged in at all? Perhaps your device has run out and now needs to be charged, but the power supply is not plugged into the outlet. Here is the result. Also take a look at the indicator, which is on the PSU. it should light up. If the indicator is off, then with 99% certainty we can say that the power supply, as it is called, ordered to live long. Do not forget to look at the indicator on the laptop itself. it should also light up. If this does not happen, most likely the wire is damaged somewhere, Inspect it carefully. A new PSU is not cheap and will cost you at least a thousand rubles.
  • The next moment on which Zaostrov would be worth his attention is the battery. If you tried to charge it, but nothing helps, then we do the following: We take the battery out of the groove and try to turn on our device. If in this case it worked, then you need to replace the battery. In the meantime, you will have to plug the laptop directly into an outlet. If nothing happened and the device still does not turn on, put the battery back in the groove and try to turn it on. Maybe this will help.
  • Very often, problems arise inside the case and here, without the help of the average user, they can no longer cope. Problems may arise with Southbridge, motherboard, various ICs, etc. Agree, you are unlikely to be able to find out the cause of the problem yourself, unless you are NOT an electrician. I do not recommend opening the laptop, especially if it is under warranty. not only will you remain under warranty, but you will also NOT be able to do anything. In this case, only service will help, and qualified, and not in Uncle Vasya behind the wall. By the way, if you do go to the service, then ask the wizard to turn on the speaker in the BIOS, which can signal in case of errors or malfunctions. by default it is disabled.
READ  HDMI Does Not Work On Laptop

A fascinating blog of enthusiastic IT specialists. Why won’t my laptop turn on? What to do?

A laptop is, without a doubt, a handy thing. If earlier these devices were sold in small quantities, which was also due to the cost of gadgets, today they are often preferred over ordinary PCs. I am a representative of the “old guard”, so to speak, and I rarely use a laptop. a familiar computer is more convenient. And there will be more problems with a laptop. For example, he often SIMply refuses to turn on. What can this be connected with and is it possible to fix this breakdown on your own?

To begin with, let me tell you the following: the article will be, as it were, divided into two parts. In the first I will tell you why the laptop turns on at all, and in the second part we will talk about why it turns on, but it cannot boot.

Laptop turns on but won’t boot

In this subsection, I will talk about Other cases when the device still managed to start, but it does NOT want to load, or it boots, but with problems.

  • If you see distortions, stripes and other images that have nothing to do with your laptop on your monitor, then this may indicate either problems with the card or with the matrix. As for the card, usually the problems are related to overheating, or chip detachment (this is treated by replacing the card, or soldering the chip). As for the matrix, to check it, you need to connect the laptop to a separate monitor or TV. if the image is normal, then the matrix needs to be changed, and this can only be done in the service.
  • If you pressed the power button of your laptop and see that the indicators on it lit up, the cooler started working, but the screen is completely black and does not show anything, and after a while the device SIMply turns off, the problem is probably related to the internal components, where it can includes a processor, RAM, various microcircuits, etc. Even the BIOS may be to blame.
  • If the gadget turns on, but reboots during the BIOS initialization phase, then this error is also caused by internal problems. Quite often, it is associated with overheating of the processor or south bridge, lack of power supply, as well as a large amount of dust that is collected in the bowels of the laptop. Alas, it will be almost impossible to clean it, and not Disassemble it.
  • Hard drive problems are common. In general, a hard drive is such a device that can fail at any time, or can work for years, does not give you any trouble. Unfortunately, it is not so easy to find out that the problem is in Winchester, because the symptoms can be different, ranging from overload at the BIOS level and ending with constant freezing during work. In this case, replacing the hard drive with a working one will help.
  • It is not uncommon for a laptop to reboot while the operating system boots. We can say with great confidence that the problem is clearly not in the hardware, but in the operating system. How to be? Of course, you can just format the hard drive and reinstall the OS, but then you risk losing valuable data. Better take a bootable version of the OS on a flash drive or disk and try to restore the operating system on your device.
  • But the crash of the blue screen of death at boot can indicate both problems with the OS and with internal components. You need to watch the error code that you see on the screen.

Don’t forget to ask your questions about the topic through comments.

Blog of the young admin. Comments on the entry “Why does the laptop not turn on? What to do?

I still don’t understand how you can check the power supply yourself

Desktop does NOT load. what to do?

If after removing the virus (or maybe NOT after, perhaps it just started up), when you turn on the computer, the Windows 7 or Windows XP desktop does NOT load, then in this instruction you will find a Step-by-step solution to the problem. Windows 10 has the same problems and is solved in essentially the same way, but there are other options: Tiles instead of the Windows 10 desktop Black screen in Windows 10. how to fix.

First of all, why this happens. the fact is that a number of malicious software make changes to that registry key, which is exactly responsible for launching the familiar interface of the operating system. Sometimes it happens that after removing the virus, the antivirus deletes the file itself, but does not remove the changed parameters in the registry. this leads to the fact that you see a black screen with the mouse pointer.

Solving the problem with a black screen instead of the desktop

So, after logging into Windows, the computer only shows a black screen and a mouse pointer on it. Let’s start fixing this problem, for this:

  • Press Ctrl Alt Del. either the task manager or the menu from which you can start it will start (start in this case).
  • At the top of the Task Manager select “File”. “New Task (Run)”
  • In the dialog box enter regedit and click OK.
  • In the registry editor, in the parameters on the left, open the branch HKEY_LOCAL_MACHINE \ SOFTWARE \ Microsoft \ Windows NT \ CurrentVersion \ Winlogon
  • Pay attention to the value of the string parameter Shell. Explorer.Exe should be listed there. Also look at the userinit parameter, its value should be c: \ windows \ system32 \ userinit.Exe
  • If this is not the case, right-click on the required parameter, select “Change” from the menu and change it to the correct value. If Shell is not there at all, then right-click on an empty space on the right side of the registry editor and select “Create string parameter”, then set the name. Shell and the value explorer.Exe
  • Look at the SIMilar registry key, but already in HKEY_CURRENT_USER (the rest of the path is the same as in the previous case). The specified parameters should not be there, if they are, delete them.
  • Close the registry editor, press Ctrl Alt Del and either restart your computer or log out.

The next time you log in, the desktop will load. However, if the described situation repeats over and over again, after each restart of the computer, I would recommend using a good antivirus, and also pay attention to the tasks in the task scheduler. But, usually, it is enough just to perform the above actions.

In the comments, the ShaMan reader suggests such a solution (it worked for some users). go to the desktop, click on the right mouse button, go to the VIEW. Display desktop icons (There should be a checkmark) if not, then we put it and the desktop should appear.

Laptop needs cleaning of software debris.

One of the main reasons why a laptop takes a very long time to boot is a large amount of software junk that needs to be removed. It is quite SIMple to do this with the help of the wonderful Ccleaner program.

You can download it for free on the official website

The program is very easy to use and in addition to getting rid of unnecessary files, it will also help you fix errors in the system registry, remove all unnecessary programs from startup, and much more.

You can read detailed instructions on how to clean your laptop using Ccleaner here.

Operating system reinstallation required.

It is also possible that the laptop takes a very long time to boot after that the system itself is very old and has SIMply outlived its usefulness. The solution here is quite SIMple. Under the heading “Installing Windows” there are Detailed instructions on how to install Windows XP, 7, 8. I am sure after reading them you will no longer have any questions.

Search and remove viruses.

A laptop can boot up for a very long time due to the fact that all its RAM and permanent memory are teeming with viruses. There is a kind of viruses that reduces the performance of your computer to almost zero, do not let it work normally. Read, if interested, the various articles in the section “Removing viruses”.

There is also a solution to this issue. You need to download the free Dr.Web Cureit antivirus! After downloading, you need to run a scan of the entire computer in deepening mode. Then delete whatever he found. You can download this antivirus from the official website:

Dust cleaning is required.

Cleaning the laptop from dust is a mandatory planned event that should be carried out as soon as the air from the radiator grill becomes scalding hot. This is another reason due to which the laptop takes a very long time to boot, as the CPU, motherboard and other components overheat, which in turn affects the performance of the laptop.

If you are NOT confident in your abilities, then it is better to take your PC to a service center, where it will be cleaned by professionals. Otherwise, if you break something, it will only get worse.

For acquaintance, you can read a fairly detailed instruction on cleaning a laptop from dust, lubricating the fan and replacing thermal paste. After reading these articles, if you are confident in your abilities, try to find on YouTube for disassembling and assembling your laptop and do everything in the same way as shown there.

Reasons why the laptop takes a very long time to boot.

  • Laptop needs cleaning of software debris.
  • Dust cleaning is required.
  • Search and remove viruses.
  • Operating system reinstallation required.
  • Check / replace hard drive and RAM.
  • Laptop upgrade required.

So, we have listed all the Possible reasons due to which the laptop takes a very long time to boot. Now let’s look at each of them in more detail.

Check / replace hard disk and RAM.

As a rule, it is because of THESE components that the laptop starts to get wildly suspended, it takes a long time to boot, there may also be blue screens of death, black screens, etc.

In order to exclude this reason, you need to check the hard disk and RAM. I advise you to check the hard drive using the Victoria 4.46b program. You can download it on the Internet for free.

There is also a Remap function for fixing bad sectors of the hard drive. After starting, you need to click on the Tests tab, select “Remap” as in the picture below and click “Start”.

RAM is a little more difficult to check. In order to do this, you need to download the memtest86 program.

Write it to a USB flash drive or disk in a special way (there are a lot of detailed instructions for recording on the Internet), and then it will boot NOT as usual from the hard disk, but from the device on which the program is recorded. You can find out how to set the boot priority in BIOS and boot from a USB flash drive or disk here.

READ  Can I install Viber laptop

The laptop takes a very long time to boot. Why?

Today I would like to talk to you about the reasons due to which the laptop takes a very long time to boot.

Let’s, I will write below absolutely all the reasons due to which the laptop boots for a very long time, and then we will consider each of them in detail.

Laptop upgrade required.

Of course, this is not a mandatory item, but nevertheless, if you do not have a powerful enough laptop, and you work with heavy enough applications or games, upgrading your laptop will help you. If you follow the link, you will be taken to a section where you will certainly find out in what ways you can increase the performance of your laptop.

This is where this article comes to its logical conclusion. I really hope that it helped you get rid of a very long laptop boot. Thank you for attention! Good luck to you!

There is no reaction

So, let’s consider a rather rare, but very sad reason that the laptop does NOT start. You are trying to turn on your little “iron friend”, but He does not react to your actions at all. That is, an absolute vacuum. No noises, sounds of switching on, Squeaks, squeals, rustling and clicks. Only silence.

If you asked yourself the question: “The laptop does not start, what should I do?”. And faced with a complete lack of reaction of this technique to all your vain attempts to turn it on, then make sure that the laptop is in good condition. Of course, this will not be as easy as in the case of a stationary PC, but it is necessary to find out what is the cause of “death”. Taking the laptop to the service center. There you will definitely be told whether your “laptop” is subject to resuscitation.

Why does the laptop not start, what should I do? List of possible faults

So, about 8 years ago, “laptops” actively burst into the world. They immediately began to be in active demand. Therefore, before discussing why the laptop does not start, let’s talk about the advantages of this technique.

Is there food?

Another reason why the laptop does not start. This is the lack of battery power and, as a result, the lack of power supply to the equipment. So before going to the service center, first, make sure that your outlets are in full working order. Thus, before you sound the alarm, try connecting your laptop to different power outlets in the house.

Alternatively, insert the battery into your laptop and let it recharge for a bit. The fact that power is supplied is usually indicated by a special indicator light. If it doesn’t burn. The battery is defective. But the laptop can work without it, only from the network. So DON’T panic right away.

There is sound, pictures comments

It also happens that the laptop does not start. A black screen appears immediately after you see signs of BIOS loading. With all this, the sound comes from the computer. Typical Windows boot noises and music are heard. In this case, the behavior of the computer indicates that it is highly likely that you have problems with the card. Most likely, it is SIMply broken or damaged. What should be done in this case? Of course, change the “spare parts”. With a great desire and appropriate skills, you can carry out this fascinating procedure yourself. Still, it’s not worth the risk. Computer malfunctions, “cured” by unskillful hands, can lead to the death of technology completely and irrevocably.

Shaking air

If the laptop does not start, the black screen, signaling its “off”, still did not light up and boot, but the noise from your “iron friend” comes. This means that you SIMply do not have Initialization. That is, the computer seems to be turning on, giving signs of life (namely: the “cooler” turns on and makes noise), the “Caps” and “on” indicators light up. All. Nothing more. The fan is spinning wildly, the “computer” hangs and DOES NOT move from a dead center.

What could it be? There are several reasons for this. The first is, perhaps, the least pleasant. Lack of “hardware”. To be more precise. Processor or RAM. That is, of course, these “spare parts” are there, but they are in a faulty condition. favorable reason for self-correction. Broken BIOS. In this case, you need to reinstall it and try to turn on the computer. By the way, if the laptop does not start, do not try to replace its constituent parts yourself. likely to be left without portable equipment completely.


Now let’s get closer to more “mundane” options for why the laptop does not start. Quite often, problems arise directly at the start of the operating system. For example, “Windows” is NOT started on a laptop at the very beginning of initialization. That is, at the stage of the appearance of a characteristic company icon. Why laptop won’t start?

This kind of problem happens mainly due to the fact that the computer SIMply does not see the hard drive on which the operating system is installed. Thus, if you are sure that the problem is not in the processor or RAM, then check if everything is fine with your “hard” one. This action is done by studying the BIOS. If in the settings of the download queue, for example, you DO NOT see the HDD, then the matter is in the hard drive. In this case, it must be replaced. It is not recommended to put your hand on the fragile and small laptop equipment on your own. Replacing the hard drive on a “laptop”. The procedure is delicate and rather complicated.


So, your laptop won’t start. What to do? If you have been safely working on your “machine” for a long time, with all this options with a lack of electricity, batteries and a malfunction of any computer hardware are already excluded, then most likely the problems are caused by viruses.

Virus attacks are known to have taken place throughout the history of the PC. Hackers and other ill-wishers are ready to go to great lengths to obtain information and damage it. Thus, various “Trojans” are capable of bringing the computer to a state of “white heat” in which you will lose control over your operating system. In addition, viruses are capable of erasing information. Absolutely any. Personal files of various contents are susceptible to attacks, but first of all, when the computer becomes “sick”, system files are affected. In this SIMple way, some important details of your operating system can easily be wiped off the face of the earth. As a matter of fact, after important files are deleted, then the first time you restart the system, you will encounter the fact that the laptop does not start. “Black Screen of Death”. This is the name of the picture, when only a black screen opens before the user when the computer boots. In the best case, a cursor will appear, which you can use to guide you across the monitor.

What to do if your laptop does not start due to virus attacks? First you need to try to clean your computer from pests. This can be done using Special antivirus programs. In addition, Windows Restore can help you with this task. Asus laptop or any other does NOT start. Does not matter. Viruses DO NOT bypass any computer.

If you do not want to once again figure out how to cure a computer system, you can SIMply update it. That is, reinstall. Format your hard drive and install a brand new OS. That being said, make sure you have a good antivirus program this time around. Also, be very careful when downloading certain files from the Internet. DO NOT visit questionable sites.

Eternal Reboot

If you have read everything that was said earlier, but are still looking for a solution to the problem “The laptop does not start, what to do”, then Study the article further. We now turn to more “pleasant” reasons.

It may turn out that the system will not boot, but the computer seems to show the next signs of life, but at the very last moment it goes to reboot. And so on until you turn it off yourself. This behavior. This is a BIOS failure signal. It is quite common for the BIOS to “fold” due to CPU overheating and dust accumulation in the cooler. Sometimes a prerequisite is damage to the computer’s power supply system. He tries to turn on, but there is not enough power. So if the laptop does not start. Asus, HP, Samsung or whatever. Taking it for a complete diagnosis to a specialized center. Still, if computers are not your element, just entrust your business to professionals.

DOES NOT start to “music

It may also happen that the laptop does NOT start, but there are still reactions to manipulations. This is already a good sign. It’s not about technology, you don’t have to buy a completely new laptop. Usually a pretty encouraging sign. Characteristic “beeping” during the first seconds of switching on.

What are they signaling? In general, there is a huge amount of literature, which clearly describes all the “beeps” and the reasons for their appearance in the absence of a full start of the computer. So if you turn on your portable equipment, and it “beeps” you, there are two ways out: read a book or take it to a service center. You can also turn to friends who have already had to deal with a SIMilar nuisance.