Laptop mouse disconnected how to enable

Mouse emulation mode settings on Windows 10

If you have Windows 10 on your laptop, the names of sections and tabs change slightly. To find a specific feature, driver, or other touchpad setting, do the following:

Open “Options”. Expand the “Start” menu and left-click on the gear icon.

laptop, mouse, disconnected, enable

Open the “Start” menu, left-click on the gear icon

Select the “Devices” section.

Press the section “Touch panel”.

Go and click on the “Touch Panel” section

Click “Related Options”.

In the right part of the window, go to the “Related parameters” section, open it

Click the “Hardware” tab, then “Properties” of the selected mouse.

Click on the “Hardware” tab, then “Properties” of the selected mouse

Here you can change parameters, check how the device works, update drivers. All this is done in the corresponding tabs of the same name.

Hotkeys

Connecting a mouse to a laptop keyboard is also called mouse emulation. The function allows you to comfortably control the pointer using only the keyboard. It is included in several steps:

Hold down three buttons: “Left AltNumLockLeft Shift” (“Left” means that we hold the keys on the left side of the keyboard).

At the same time we hold down the keys “Left AltNumLockLeft Shift”

A dialog box will open where it is desirable to select “Yes”. By the way, it is better in this case it is located directly on the desktop, and not in documents or programs.

Important! Before using the keyboard mouse, we recommend making the settings.

Move with the arrows to the “Yes” button, press “Enter”

Use the arrows or Tab to navigate to the Go to Ease of Access Center link and press Space. You are taken to a section called “Accessibility”. Optionally, you can configure almost all the necessary parameters, including the speed of the cursor.

Use the arrows or the “Tab” key to navigate to the accessibility center link, press the spacebar

In the settings window, use the arrows to configure the appropriate parameters, go to the “Apply” button, then “OK”, press “Enter” on each

If you did everything correctly, a mouse icon will appear on the notification bar. It disappears when you exit this mode. This is done with the same set of keys: “Left AltNumLockLeft Shift”.

After confirming the action, the keyboard mouse icon will appear on the taskbar

Easily connect the touchpad by clicking the “F”.key in the top row. Usually a corresponding picture is drawn on it. Also, the touch panel is turned on using various keys. Different brands of laptop have their own combinations:

  • FnF1. Gigabyte;
  • FnF7. Acer;
  • FnF5. Samsung brand;
  • FnF5 is a Dell brand;
  • FnF6. Lenovo brand;
  • FnF5. Toshiba;
  • FnF1. Sony;
  • FnF4. Fujitsu manufacturer;
  • FnF9. ASUS laptops.

On a note! Some models do not need the “Fn” function key.

The button responsible for turning the touchpad on and off has a corresponding icon

There are also laptops where the touchpad is activated with one simple button located next to the touchpad. It can represent a depression or a slight dot, and sometimes even a rather noticeable button with a special designation. HP provides almost all of its devices with just such a hardware button.

On some laptops in the upper left corner there is a dedicated button to turn the touchpad on / off

Drivers

One of the extreme but obvious measures to enable the touchpad on a laptop is to install drivers. In any case, the software is needed for the correct operation of all devices. Usually it is installed when buying a gadget, but sometimes you have to install it yourself. You can find the official driver on the manufacturer’s portal.

Incorrect operation of the touchpad can be caused due to incorrect operation of the drivers

Important! Before downloading the software, pay attention to the laptop model, as well as the category and version of Windows.

The driver can be compatible with the device even if one of the three parameters matches, but it is better that all match. Then, in the future, there will be no problems with the operation of the sensor.

In some cases, the driver is downloaded to a laptop as a file with an atypical exe extension. It is then installed as a regular program via the Installation Wizard. This is also done in the following way:

Launch “Control Panel”.

Use the arrows to move to the line “Control Panel”, press “Enter”

Enter “Device Manager”.

In the “View” mode, set the value “Large icons”, find and open the “Device Manager”

Expand the branch “Mice and other pointing devices” (or simply “Mouse”), using the arrows and pressing the “Enter” key.

Go to the line “Mice and other pointing devices” using the arrows on the keyboard, press “Enter”

Call the “Properties” of the device by pressing the “Enter” key on the line with the name, and see if it works correctly.

Go to the line with the device name, press “Enter”

We check the status of the device in the appropriate section

Go to the tab called “Driver”.

Try clicking the Roll Back Driver button. If your OS version does not have one, or it does not help, click the “Update” button.

Go to the “Update” option, press “Enter”

When the necessary software is already available on the laptop, it remains only to select “Manual configuration”.

Indicate where the downloaded driver is located on the laptop by opening the “Browse” option, and calmly wait for the installation to complete.

Find the folder with the drivers, select it, click “OK”

Click “Next” and wait for the installation process to complete

It is then important to reboot the laptop and check the sensor again. If even after such manipulations it does not work, the reason is most likely a physical problem.

How to turn on the mouse on the laptop keyboard

If you need to turn on the mouse on the laptop keyboard, it is worth taking the path from light to heavy. Because by default, the touchpad (aka mouse) is literally turned on with one button. But there are a lot of problems that complicate the inclusion process.

We have selected all possible ways to solve this problem, from new laptops, where everything should work perfectly, to faulty gadgets. So how to turn on the mouse on the laptop keyboard in your case?

How to turn on the mouse on the laptop keyboard

Hotkey assignment

In a special dialog box with mouse emulation settings, which was already mentioned above, you can configure the assignment of hot keys.

Important! The window allows you to select the characteristics of the electronic mouse in such detail that it is convenient for you to use it.

However, there are some standard keys that can be used by default on any device:

    The NumLock key pauses or re-enables keyboard mode on the laptop.

To use the cursor, you need to press all the numeric keys, except for “0” and “5”.

To control the keyboard mouse, all numeric keys are used, except for “0” and “5”

The “Ctrl” key slows down the cursor movement, and “Shift” speeds up.

The “Ctrl” key slows down the cursor movement, and “Shift” speeds up

  • Explorer launches a set of keys “WinE”, “ShiftF10” displays the context menu, locks the device “WinL”.
  • Note! The layout of the keyboard does not matter. You can press combinations with English keys, even if the keyboard is in Russian. The computer will “understand” you and execute the command.

    Reboot

    When your computer is fully functional, restarting the system will help. Ideally, after it, the touchpad functions without interruption, which allows you not to try other methods. It is most convenient to reboot using a standard computer mouse.

      Launch the Start Menu. Without external peripherals, just press the button with the Windows logo. Select “Restart” or “Shutdown” using the arrows, then click “Enter” and wait for the laptop to complete the task.

    Click on the button with the Windows logo

    READ  Laptop Battery Connected But Not Charging

    Move using the arrows on the keyboard up and down to the item “Shutdown”, press “Enter”

    Use the right arrow to expand the menu, move to the “Restart” parameter, press “Enter”

    Use the key combination “CtrlAltDelete” to bring up a special menu. Here and “Device Manager”, and other modes, including “Shutdown”. To select items, use the arrows on the keyboard.

    Press simultaneously the key combination “CtrlAltDelete”

    Using the arrows on the keyboard, move to the shutdown button, select “Restart”, press “Enter”

    If desired, reboot directly from your desktop. The set of keys “AltF4” is responsible for this. It opens a convenient shutdown menu, where you can select items by memorized method. arrows.

    Using the arrows on the keyboard, select the “Restart” parameter, press “Enter”

    Restarting does not always help. Therefore, in the case when the problem remains unresolved, it is worth using more effective methods to help eliminate it.

    Special function

    The reason the touchpad won’t turn on could also be a special feature that is manually configured. The touchpad is automatically disabled when an external mouse is connected to the notebook. This parameter will have to be disabled manually if you are going to use both external peripherals and the built-in panel.

    Find yourself in the “Control Panel”. How to do this without an external mouse is described above.

    Click on the button with the Windows logo

    Use the arrows to move to the line “Control Panel”, press “Enter”

    Find the “Hardware and Sound” section.

    In the “View” mode, check or set the “Category” value, find and open the “Hardware and Sound” section

    Select “Mouse”.

    In the properties there is a section “Pointer parameters”, which is what you need.

    In the “Pointer parameters” tab, use the arrows to configure the appropriate ones

    Next, go to the appropriate tab, on different laptops it has a different name, “Enable” or “Disable” the option “Turn off the touchpad when an external mouse is connected”, confirming the decision with the “OK” button.

    Go to the “Elan” tab, put a tick on the item “Disconnect when connecting an external USB mouse”, click “OK”

    When a special function is not active, it is worth looking deeper into the cause. You can try to configure the mouse on the laptop keyboard through the BIOS.

    Any user can configure the parameters of a laptop through the BIOS, but if you absolutely don’t understand anything about this, it is better to entrust the work to an experienced user. Setting up is easy, in several stages:

    Reboot the laptop. During power-on, you need to have time to press the “F2” or “Delete” keys to get into the BIOS.

    When the system boots, you can see the key to enter the BIOS

    In the “Internal Pointing Device” parameter in the “Advanced” tab, make sure the value is “Enabled”. If not, install it yourself.

    Go to the “Advanced” tab, in the “Internal Pointing Device” parameter, check the value so that it is “Enabled” or set it yourself

    Press the key combination “F10Y” to save the setting.

    Press the key combination “F10Y” to save the setting

    Important! There is a problem at this point. It lies in the fact that the BIOS can be of different versions, they all have different section names.

    The above are classic, but not available in every laptop. To find out exactly what parameters you need, you should go to the manufacturer’s website and carefully read the important operating instructions directly for your device model.

    Mouse buttons

    If it is more convenient for you to work with the mouse with the left hand, then you can configure the button remapping (the left one will perform the functions of the right and vice versa). The type of mouse does not matter: it connects via Bluetooth, USB, or is built into a laptop in the form of a touch panel.

    Below there is a slider for adjusting the double-click speed. If you do not have time to press the button to open the folder, set the slider to the minimum value. Hover your cursor over the folder icon and see if your work is more comfortable. You can also configure sticky buttons on this tab.

    However, it is not recommended to do this: the function is implemented inconveniently, it is easier to hover the cursor, hold down the left button and climb the object without any sticking.

    Pointers

    If you do not like how the cursor looks in different situations, you can customize its display in the “Pointers” tab.

    • Use one of the standard schemes.
    • Manually assign a pointer to each situation.

    You can create your own schema and save it in parameters, but usually the cursor does not attract such close attention from users.

    Pointer parameters

    Much more important than the appearance of the pointer are the parameters of its operation on a laptop or computer. On the tab of the same name, you can specify the speed of movement, initial position, the need to display the trail, etc.

    Be sure to enable increased pointer positioning accuracy. this option will help you hit even the smallest interface elements.

    Enabling the touchpad

    The touchpad must be turned on before using it. Different keyboard shortcuts are used depending on the laptop manufacturer. To enable the touch mouse on your ASUS laptop, press FnF9. If you have an Acer, then use the combination FnF7 to activate the touchpad.

    To understand which button you need to press to turn on the touch mouse on a laptop, take a close look at the keyboard. Look for the touchpad icon in the F1-F12 key row. Combined with the Fn key, this button enables / disables the touch mouse.

    Connecting a wired mouse or wireless device via Bluetooth usually does not cause problems either. The main thing is to check that Bluetooth on the laptop is turned on if you are using wireless equipment.

    Mouse settings

    It doesn’t matter what kind of mouse you use on your laptop. touch, wired, wireless, Bluetooth. To set it up, you must follow the same steps:

    • Open the control panel.
    • Change the display to “Large Icons”.
    • Go to the “Mouse” section.

    In the properties of the input device, you will see four tabs that allow you to customize how your mouse works on your laptop. On another tab (Hardware), you can view information about the connected device. On laptops ASUS, Acer and some others there is also an “ELAN” tab for setting up multi-gestures.

    If you are using a wireless mouse, a Bluetooth connection will appear in the Location line. The screenshot shows that the laptop works with a regular wired mouse. Let’s consider the rest of the tabs in turn: find out what you can configure on them.

    Wheel

    The last tab of parameters we are considering is called the “Wheel”. There are only two options that can be configured:

    • Number of scrolled lines per click.
    • Number of characters scrolled when the wheel is tilted horizontally.

    The last parameter does not work on all mice. If you have the simplest input device, in which the wheel does not tilt to the sides, then you will not be able to scroll horizontally on the screen.

    Manipulator settings

    If the mouse on the laptop suddenly stopped responding to pressing, and the cursor cannot be moved in any way, then, perhaps, the reasons are hidden in the incorrectly selected manipulator settings in Windows.

    The problem is solved by going to the section “Changing mouse settings”. As in the case with the diagnostic “Wizard”, you will have to use the “Start” menu, and from there, through the search, open the desired directory with options.

    Important parameters are also hidden in the upper right part of the interface. there developers from Microsoft allow you to change the “leading” button and figure out the scrolling speed. Slightly below there are sliders with the size and appearance of the cursor, and at the same time, the “Additional Mouse Options”.

    READ  How To Make A Presentation On A Laptop

    It is better to go through the listed sections thoroughly by adjusting the configuration of the buttons, activating or canceling the sticking effect, and changing the pointers. Changes are saved automatically, but in some situations they take effect after restarting the laptop.

    How to fix errors and problems in Windows

    In addition to the standard actions associated with finding a third-party USB connector: checking the battery charge and restarting the touchpad. we cannot exclude alternative solutions that often work in the operating system from Microsoft. And, since the only manipulator failed, then the instructions described below are specially adapted for use from the keyboard.

    The mouse does not work on a laptop: what to do if the cursor does not move, but it is on?

    Wireless and wired computer mice and touchpads rarely need special settings and confusing additional steps when connected. In most cases, even drivers are not needed: it is enough either to find a suitable USB connector, or to activate the available Bluetooth technology in Windows. Touchpads (touchpads) on laptops turn on automatically and work almost inseparably together with the operating system.

    And yet, situations when the mouse is not detected by the system, the cursor does not move, and the buttons are not pressed. they meet, which means it’s time to figure out how to act if nothing works.

    Common and common causes of problems

    • Inattention. A category of reasons centered on platitudes. We are talking about an unexpected disconnected wire, and about discharged batteries in Bluetooth mice, and about forgotten switches provided on the underside of some types of wireless equipment. Occasionally, there are problems associated with contamination of optical and laser sensors. You can go through possible scenarios for a long time, but it is better to repeat the usual ritual of connecting the mouse once again, without missing any details. detailed instructions are therefore read here.
    • System problems. If the computer mouse or touchpad is no longer detected by the system immediately, but after a short period of time, then the problem may be directly related to the Windows operating system. The error is most likely temporary and not global, and therefore is often solved by a reboot. From the keyboard, the procedure is performed through the “Start” menu, using the “Tab” and “Arrows” buttons, allowing you to move the switch. After going to the “Turn off” item, an additional choice will appear. “Restart”.
    • Hardware crashes. If platitudes have long been discarded, and the reboot did not lead to the desired results, then the mouse stopped working and is no longer detected by the system due to physical damage, non-working wireless modules (Bluetooth) and failed USB interfaces. How to proceed depends on the specific situation, but in many cases the choice of a third-party connector on the other side of the laptop or the already familiar reboot helps.

    Rare reasons include the presence of malicious software. The factor, although unexpected, is often described on the net. The problem with the detected viruses, trojans and interceptors is being solved with the help of the proven HitmanPro security complex. After downloading and unpacking the software, you don’t have to deal with the settings. the search for pests is started from the “Next” button, which is immediately highlighted and available for use from the keyboard with the Enter button (if the mouse does not work).

    Analysis of the contents of hard drives, RAM and third-party sources takes from 3 to 10 minutes. Rebooting the laptop is a must. And, if the touchpad or mouse on the laptop did not work due to malicious software, then after starting Windows the problems will disappear.

    Computer manipulators. Varieties and features

    If the check for “banal inattention” is passed, hardware damage is excluded, and Windows is working properly and without errors, then you will have to look for the reasons for each type of manipulators separately.

    Wireless mouse

    Before connecting, you will have to in the USB interface. either connect a special Bluetooth adapter, or activate the wireless “transceiver” that is already available on the laptop and is activated through the parameters.

    The connected mouse will not work if the Bluetooth or adapter is not functioning and there are wireless problems. The Bluetooth and Other Devices section in Windows will help you troubleshoot. From there it is easy to add a new manipulator or diagnose a non-working.

    Touchpad

    The touchpad on a laptop does not respond to touches only if it is forcibly disabled in the “Settings”, or from the keyboard. on laptops, the touchpad is often turned off through the combination “FN F6”.

    Even more often, the touchpad stops working if a third-party pointing device is connected. a wireless or wired mouse. And, if there is a desire to leave the touchpad always available, you will have to look into the “Control Panel”. called from the “Run” menu through the “Win R” combination using the command: “Control”. And then. select “Hardware” and “Properties” of the computer mouse.

    After the transition, it remains to check whether the item is not active, connected with disconnection when connecting external USB devices. The parameter may be called differently, depending on the manufacturer of the manipulator, translation, and even the number of additional settings. Therefore, it is worth understanding the details in more detail.

    Wired mouse

    It is connected via USB to a laptop (rarely. through a PS / 2 port, for which you will first have to find a USB adapter). As a rule, it does not need any configuration or loading drivers. the operating system automatically copes with everything.

    If nothing happens when connecting, then first it is recommended to check the adjacent USB connector, and then look into the BIOS, which is called during the laptop reboot using the “Del” or “F12” keys. In the section “Advanced” or “Integrated Peripherals” (and on motherboards with EUFI and Russian translation, you will have to look for “Additional settings”). you will have to find and activate all USB controllers. Perhaps due to software errors, some of the settings are lost.

    Pros of the touchpad or what is the touchpad for?

    Such a fixed device of the built-in mouse is convenient for laptop computers, where you need to have as few moving parts as possible. Precisely due to the fact that the computer itself is portable, it is not desirable to have something else moving in it.

    On this built-in mouse, you can not only move your finger, but also perform many other actions. For example, you can tap on the built-in mouse, which will be similar to clicking on the left button of a conventional computer mouse. In more advanced computers, especially Apple’s MAC, you can use the built-in mouse to rotate the image, zoom in or out, and perform many other convenient actions with the movements of a few fingers.

    Also, built-in mice of portable computers have left and right buttons, completely analogous to the left and right buttons of a conventional computer mouse.

    Since the actions on the built-in computer mouse of portable portable devices are performed most often by touching the fingers on a rectangular platform on the computer case, this mouse got its name “touchpad” from the English words “touch”. to touch and “pad”. a platform. That is, in plain language

    “Touchpad” means “touch the pad with your fingers”.

    Disabling the touchpad

    If your laptop uses a Synaptics touchpad, you can configure it to turn off automatically when the user connects a wired mouse.

    • Open the control panel. Set the display of sections as icons rather than categories.
    • Go to the section for mouse control.
    • Go to the “Device Settings” tab. Check the box “Disable internal device when connecting external”.

    If you want to completely abandon the use of the touchpad on a laptop, you can click on the “Disable” button in the device settings. The touchpad will not respond to your requests until you reopen the options and click the Enable button.

    • Open the control panel. If the display mode is one of the types of “Icons”, then you will find the section “Device Manager”. Go to it.
    • Expand the subsection “Mice and other pointing devices” in the manager.
    • Find the touchpad and right-click on it to bring up the context menu. Click Disable.
    READ  How to take a screenshot of the screen on an HP laptop

    The touchpad can be located in another section, for example, in the HID Devices submenu. It is also called differently depending on the equipment model. The title does not necessarily have the word “TouchPad”, so you may have to experiment. If you accidentally disconnect the wrong device, that’s okay. Right click on it and click “Enable”.

    You can choose a more radical path and disable the touchpad in the BIOS.

    • Reboot the laptop, enter the BIOS by pressing the Delete or F2 key at boot.
    • Go to the “Advanced” tab and set the “Internal Pointing Device” parameter to “Disabled”.
    • Save the configuration by pressing the F10 key.

    After disabling the touchpad in the BIOS, the main thing is not to forget to connect a wired mouse to the laptop, otherwise you can try for a long time to find out why the cursor remains stationary, despite all attempts to control it.

    Disabling the touch mouse via BIOS

    Although the previous method is convenient, the disadvantage is that immediately after restarting the TouchPad it will be operational again and you will need to press the above combination again.

    You can completely disable it through the BIOS. The BIOS contains settings for all major components, including this.

    Restart your laptop. When enabled, press F2 or Del (or other options, depending on the BIOS version).

    How to change, remove or renew your Windows license

    Go to the Advanced field and find the Internal Pointing Device parameter. “Enabled”. to enable, “Disabled”. to disable.

    Another parameter may look like this. (Read the manual for your laptop, where you have this parameter in your BIOS).

    Option 2, how to enable or disable the touchpad on a laptop

    In other laptops, to enable / disable the touchpad, you need to press the Fn key combination and one of the top row F1-F12. The Fn key is usually found in the lower-right corner of your keyboard. Which of the F1-F12 keys to press can be judged by the pictograms applied to them, which are made in the same color as Fn.

    For a Sony Vaio laptop, you can disable / enable the touchpad using the FnF1 keys. We pressed FnF1 once and thus disabled the touchpad. Pressing FnF1 again will re-enable the touchpad.

    The icon for turning on / off the touchpad usually looks like this touchpad. a rectangle with rounded corners (the image of the “platform”), under which two small rectangles are shown (like buttons, left and right mouse buttons) and above all this there is a cross, like the letter “x” meaning “off”. But there may be other mnemonic pictures of the touch panel, here computer manufacturers are trying their best to.

    How to enable or disable the touchpad on a laptop?

    Let’s start with the usual computer literacy question: “What is a touchpad in a laptop?”

    Laptops, netbooks and other similar portable devices (for example, a tablet computer) usually include a built-in computer mouse. This built-in mouse is not at all like the usual computer mouse that you can move around the table and press buttons.

    The built-in mouse in portable notebook computers has a completely different design. If an ordinary mouse moves on the table, then the built-in mouse of portable computers stands, as they say, tightly. But you can move it with your fingers, which is completely similar in response to the movement of an ordinary computer mouse on the table.

    Using function keys

    On almost all modern laptops, it is possible to disable / enable the touchpad using a special combination of function keys. For different models of laptops, their options are different. It should be noted that this method works in the presence of native drivers.

    In many laptops, this is a combination of simultaneously pressed FnF9 buttons. But based on which model. options may vary.

    If your laptop is not among the above, pay attention to the function keys for the presence of a picture with a crossed out touchpad on them.

    If you do not find the picture, it remains to try brute-force (make sure not to disable other necessary functions). Probably, in this case, you do not have special drivers installed, you can update them or resort to other methods described below.

    Option 3, how to enable / disable the touchpad on a laptop

    If, for some reason, using the described methods, it is not possible to enable or disable the touchpad with a special button or using the function keys. then this can be done through the BIOS settings. To access these settings, you need to hold down the F2 or Del key while starting the laptop. As a rule, when turned on, a hint is displayed at the bottom of the screen which key to press. It must be remembered that this prompt appears for a very short time. And you need to press this key exactly at the moment when the prompt is displayed. Otherwise, it will be impossible to enter the BIOS setup program, you will need to restart the laptop.

    In the BIOS settings, we find the item Pointing Device (literally “pointing devices”). Change its value to Enabled (literal translation “Enabled”) if you want to enable the touchpad, or to Disabled (literal translation “Disabled”). to disable the device. Then exit with saving (as a rule, this item of the BIOS setup menu looks like “Save Exit” or “Exit with Saving”) for the changes to take effect.

    Remember, you need to be careful with the BIOS settings, especially if you do not know what this or that setting is for. You can even damage your computer to such an extent that it cannot be repaired, this is how this BIOS is “insidious”.

    Mouse connection

    To connect a wired mouse, you need to find a free USB connector on the laptop case. If there is no free port, use a splitter. But you cannot connect many devices like this, otherwise the mouse may not have enough power.

    No software is required to operate the mouse. You also don’t have to turn it on separately, after connecting the device will work immediately. In this case, the touchpad will continue to respond to user actions. If it gets in the way, you can disable the touchpad and use only a wired mouse connected.

    If you have a wireless mouse that works via Bluetooth, then connecting it will be easy too. On Windows 7:

    • Turn on the mouse so the laptop can detect the device.
    • Click on the wireless icon in the system tray. Select “Add Device”.
    • Wait for the scan to complete and select a mouse from the list of connected equipment.

    On Windows 8 and Windows 10, you can enable Bluetooth on the tab of the same name in the “Devices” section of the system settings. The search for the mouse will start on the laptop in automatic mode, make sure it is turned on.