Laptops and Tablets • Recommendations and advice


iPhone white screen with apple what to do

The iPhone does not turn on but the apple is on the screen. What to do?!

Popular smartphones from Apple, whatever one may say, this is the same computer, albeit a mobile one. And with him, like other representatives of this class of devices, troubles can happen. both hardware and software. One of the common reasons that can happen to them is when the iPhone does not turn on, but the apple is on after pressing the Power button.

People call this unpleasant problem the “white apple”. In fact, this is a certain state of the iPhone, which is characterized by the display of the company’s logo on the screen (a bitten glowing apple) when trying to turn on the smartphone. In this case, further loading of the device does not continue. At the same time, he does not react to anything and, as usual, does not turn off. How to be?
The easiest thing to try is a Hard Reset. But, let’s take our time and consider all the options in order.

So, what can you do to restore the phone’s performance if the iPhone does not turn on, the apple is on?!
There are such methods:

Option 2. Reinstall iOS

If the first method did not help, you should try reinstalling the software on the iPhone. To do this, the iPhone launches in DFU mode. This is done like this. we connect the smartphone to the computer and launch the iTunes program. Next, hold down the Power and Home buttons. You need to hold it for about ten seconds. After this time, only the Power button must be released. After that, iTunes should see the device (the screen will remain dark).
Well, then the program should offer to restore the device from a backup and reinstall iOS.

Then, after the device is restored. make a software update.

Option 1. Hard Reset

We turn off the iPhone using the Hard Reset method, that is, the so-called “hard reset”. To do this, you need to simultaneously hold down and hold down two buttons for 10 seconds: Home and Power. Keep out until the device turns on.

Option 3. Picking Cydia

This method is an alternative to the previous one in the event that you do not want to restore the device or for some reason cannot do it while the iPhone does not turn on and off, but the glowing apple is on.

Here I will make a small lyrical digression. The fact is that very often the reason that the iPhone does not turn on is the installation of some third-party application, which either did not get up correctly, or does not work correctly. Then you should try to remove it and restart your smartphone. Another equally common reason is Cydia tweaks.

To restore the performance of the iPhone, which has an apple on the screen and does not disappear, let’s try to load it without Cydia tweaks. To do this, turn off the device, press the volume up button. “” And hold it down, wait until iOS boots up without Cydia tweaks. If the download is successful in this mode, the reason is clearly in the last installed Tweak. Delete it and the device will work again.

If it still does not boot, then restart it again. Then after 5 minutes try to call your iPhone.
If you manage to get through. great! This indicates that the phone’s loading is interrupted at the very last moment of the OS launch. Then you need to try to access the file system through the iTools or iFunBox programs and use them to look for the files that are responsible for the malfunction.

Otherwise, whether you like it or not, in order to remove the burning apple on the phone screen, you still have to reinstall the IOS using the method I described earlier.

Note: This instruction is suitable not only for smartphones iPhone 4, 5 or 6, but also for iPad tablets, because both there and there one operating system is installed, which means that an apple can burn on the iPad and it does not turn on and does not turn off.
Good luck and stable work!

IPhone Screen Glows White. Check Digitizer

This is an option when the touch panel fails, but in order to inspect it you will also need to open the smartphone.

When the digitizer (touch panel) is not working, your screen will not respond to your finger. If there is enough knowledge, then remove the old one and put a new one.

Note: replacing the digitizer or LCD panel does not void the warranty due to the lack of factory seals.

Reasons for White Screen on iPhone iPhone

There can be many reasons for the iPhone’s screen to go back, but most often it is software bugs.

READ  Is there a fingerprint on the iPhone 11

White screen may appear after iOS update, jailbreak installation crashes or incompatibility between iOS version and device.

A hardware issue can also be caused, for example, if the iPhone is dropped on a hard surface.

In most cases, the connection between the motherboard and the screen is broken. Hardware problems are only resolved by an Apple Authorized Service Provider.

Why is the iphone screen white

When iPhone 5, iPhone 7, iPhone 5s, iPhone 4, iPhone 4s, iPhone 6, iPhone 6s and others turn on a white screen, this happens quite rarely.

IOS is characterized by good stability and performance, only there are situations when these Apple devices show flaws. errors and malfunctions.

Among the most famous and serious bugs in iphone 5s, iphone 6, iphone 7, iphone 5, iphone 6s, iphone 4s, iphone x, iphone 3gs, iphone 4, iphone 7 plus, iphone 3g. white screen.

Supposedly BSOD, as in computers running Windows. Blue Screen of Death.

How To Fix iPhone White Screen Of Death (Including iPhone 7)

In addition to the fact that the screen is white, it may be black and white, a white small circle, white corners, a white point, two white points, white squares or a white point on top will appear.

Now I will not dwell on all these nuances, but whoever needs it, describe it in the comments, and I will give you a solution.

IPhone has a white screen. check the LCD panel

If something serious happened to the LCD panel, then it will have to be replaced, but if this is minor damage, for example, the contact is disconnected, then you can press it yourself.

Only you will have to remove the back cover, which is difficult in Apple devices, but if removed, then inspect contact No. 1. if it “comes out”, then gently insert it into place. If the case was in the LCD panel, then the white screen will stop glowing.

IPhone White Screen. Use DFU Updates

DFU is a more complex operation than recovery, which results in a complete reinstallation of the iOS operating system.

Use DFU only if previous surgeries have failed. as a last resort.

You must have a computer with the latest version of iTunes and an iPhone to computer data cable. At this point, the operation varies depending on the iPhone model.

iPhone 8 and X: Press and hold the Sleep button for 3 seconds, then press and hold the Volume down button for 10 seconds.

If the Apple logo appears, release the Sleep button but continue to hold Volume Down for 5 seconds.

If the screen remains black and nothing is displayed on it, it means that the device has entered DFU mode. You are on the right track.

iPhone 7 and Plus: Press and hold the Volume Down and Sleep buttons at the same time for 10 seconds.

Release the “Sleep” button, remove your finger from the volume and immediately press it for another 5 seconds. If the Apple logo appears, repeat the process. If the screen is black, it means that the phone has entered DFU mode.

iPhone 6s or older: Press and hold the Home and Sleep buttons for 10 seconds, then release the Sleep button and hold the volume down for another 5 seconds. Black screen shows device entered DFU.

Once you have entered DFU mode, carefully follow the instructions from iTunes. The whole process will take a few minutes.

If the above solutions do not help, and the smartphone is locked or does not respond to “Recovery Mode” and “DFU Mode”, then most likely you cannot do without the help of an Apple authorized service.

iPhone stuck with white screen

This is a common problem on devices that have the ability to zoom (zoom) to a high level (5x).

In the case when “Zoom” is to blame for the white screen, it is recommended to disable this function: Settings → General → Accessibility → Zoom → OFF.

If the screen remains white, then there is a chance to bring it back to life if you press the power button for a while.

If that doesn’t work, then try a cooler option called a hard reset. This reset does not delete data on the device and does not affect settings.

IPhone White Screen. Use Recovery

If the above method does not work while the display is white, you can try “recovery mode” and restore data from an iOS backup.

Before using “recovery mode”, you need to know that the iOS operating system will be reinstalled.

To do this, you must have the latest version of iTunes installed on your computer and a compatible cable to connect your smartphone to your computer.

Restore iPhone 8. X: Connect your device to your computer and open iTunes, then press and release the volume up button and do the same with volume down. Press and hold the “Sleep” button in recovery mode in iTunes.

Restore iPhone 7: Press and hold the Volume Down and Power On / Off buttons at the same time.

Restore iPhone 6s or older: Press and hold the Home and Sleep / Power buttons at the same time, activate the recovery mode option.

After entering recovery mode, follow the steps to reinstall iOS from backup.

It is very important not to release the buttons when the Apple logo appears, but to keep it until the recovery mode.

How to Hard Reset iPhone White Screen

For iPhone 6 or older, press and hold the Power and Home buttons for a few seconds.

On iPhone 7 and Plus, you no longer have a Home button, so press Volume Down and the Power / Sleep button.

On iPhone 8, Plus, and X, use a different technology from previous models: Press and quickly release the Volume Up key, immediately followed by Volume Down, then press On until the Apple logo appears.

If you have an old 6s, then there is another key combination for it: press and hold the buttons: Home Volume up Sleep / Power.

After the Apple logo appears, you can release the buttons. This method will not work on iPhone 8, X and 7 (even if the latter has a virtual Home button).

It’s all about the battery

The most common and simple reason when an apple burns and the screen goes out on an iPhone. A person is sure that the phone is charged, and does not understand why it turns off immediately, starts looking for problems in other malfunctions. But everything is trite. the battery is out of order and needs to be changed or tried to calibrate. Will calibration help? It’s a moot point, it’s worth a try, that’s for sure.

READ  How to unlock Samsung if the screen does not work

To begin with, let’s try again to recharge the phone’s battery, but with the help of another charger, since the first one may simply be broken.

We remember if the iPhone turns on only before the apple and turns off immediately, first of all we try to change the memory, and only then we proceed to other, more radical methods.

Burned out microcircuit on the board

If even the flashing did not help when the iphone 4s, 5, 5s, 6, 7 models blinks with an apple on the screen and does not turn on at the same time, then the exact cause of the breakdown can be told exclusively at the service center. Most likely, the microcircuit on the motherboard of the smartphone burned out or went off, you cannot fix it yourself, you need expensive equipment.

In this case, he can only list the factors why this could happen.

  • Falling iPhone into water, followed by a short circuit.
  • The power controller came out of a standing position, after a strong voltage drop in the household network or using a non-original charger.
  • Over time, the battery becomes unusable, after two or three years, the battery should be replaced in any case. Very rarely, the battery breaks down as a result of mechanical damage when dropped on a hard surface.
  • The iPhone does not turn on while charging, the apple lights up and goes out, in this case, the damage may be hidden in the internal microcircuits. For example, the Flash memory chip has come off the board or disconnected as a result of a fall. The same can happen with any chips on the motherboard, be it NAND Flash or Nor Flash chips.

There are two ways out. to solder yourself, but if you are not friends with a soldering iron and do not have straight hands, it is better not to climb, you can simply kill the iPhone, without the possibility of recovery. The best option is to take the phone to trusted masters.

An apple is lit on the iPhone screen and it does not turn on, what to do?

Depending on the iPhone model, the screen may display a white screen with an apple or a black background, depending on the color of the case. The background does not matter, if the logo appears and the iOs download stops there, we follow the instructions. But first, let’s determine what happened to the phone.

Making a forced reboot

In 90% of cases, a hard reboot will remove most glitches and crashes when the iphone 5 smartphone flashes an apple on the screen and does not turn on.

  • We disconnect the iPhone from the computer or laptop, since iTunes may interfere with the restart and switch the device to UDF mode, now we do not need it.
  • We simultaneously hold down two Home and Power buttons, wait 5-10 seconds, the phone should go into reboot.

After rebooting, the logotype will appear again for a while, and after a minute you will see the loaded iOs, you can use the device in normal mode, and not try to install the crooked application that caused such problems. If the above methods did not help, then you will have to reflash the device.

IOs system error

Reflashing iPhone

It must be remembered that when flashing, all information is deleted, you will receive an absolutely clean phone with factory settings. Then you can restore everything, but provided that you have a saved backup in iTunes. In the absence of a backup copy, only an authorized service center will help to get information from the problem gadget, but for a decent price. Therefore, at least once a week, make a backup if you have important information on your iPhone.

How to reflash an iPhone was discussed in the article. If you don’t want to waste time reading, I’ll leave at the bottom a video instruction on how to reflash the device, if the iPhone 5 doesn’t turn on, the apple is on and after a while the screen goes out.

Checking the loops

Rarely enough, the cable of the screen or any other element inside the iPhone can jump out of the connector, as a result, the screen flickers for 5s, the apple lights up and the display goes out. It is easy to treat it, we open the phone case, and flip all the connectors with loops.

The flickering of the screen should disappear, along with it the problem should go away when an apple is on the screen of the iphone 5, but does not turn on.

Death screens on iPhone: what to do when the display glows red or white?

Many PC and smartphone users are familiar with the expression “screen of death”. Those who have encountered this phenomenon remember: the device freezes, spontaneously reboots, and then gives an error in the form of a monochromatic monitor.

If you have not encountered a similar problem, then this is good news. after all, not a very pleasant problem.

Regardless of how high-quality Apple products are, the iPhone is not immune to glitches. On iOS, there are four options for such failures: the display can be red, white, blue, or black.
Today we’ll talk about the first two. Let’s see what the gadget wants to say by this?

Red screen on iPhone

iPhone does not boot when turned on, but lights up in solid red? This is a rather serious problem. Most often it indicates a malfunction of the display loop after a shock. After such damage, do not try to fix the damage yourself. The best solution would be to seek help from the Apple service center in Kiev, so that inexperience does not aggravate the situation.

Provided that the phone is handled with care, the malfunction may be in the operating system. At your own risk, you can try to restore it using iTunes.
It’s good if you made backup copies of your personal data, otherwise you will lose them 🙁

iphone, white, screen, apple

How is iOS recovery done via iTunes:

  • download the latest iTunes to PC and connect iPhone to USB
  • do a factory reset: hold down HomeSleep and wait for the apple to appear
  • keep pressing until the logo disappears. And then, release only the Sleep button
    on your PC, you will see a notification from iTunes that will tell you what to do to permanently restore your device
READ  How to make a screenshot on the iPhone XS

In the vastness of the Internet, you can find programs that restore OC without backups and data loss. But giving access to the phone to unverified programs is not always a good idea.

White screen on iPhone

If the smartphone turns on, and after that does not boot as usual, but gives out a clean white display (sometimes with an apple), do not rush to panic!

First, let’s find out the reasons for this behavior of the iPhone:

  • iOS problem, various software bugs;
  • problems with the LSD panel;
  • complex mechanical damage to parts due to impact.

Are you ready to try yourself as a technician? Below we have described a couple of tips that will help in some cases:

  • If there is a software error, just try restarting while holding down HomePower.
  • There is a second way: try holding down Home and then the top Power button. After rebooting, the smartphone usually recovers.

A broken LCD panel cannot be repaired. But sometimes only 1 contact leaves, which can be corrected even with minimal knowledge in disassembling electronics:

  • remove the back cover using screwdrivers and a suction cup;
  • inspect the numbered contacts, yours. ;
  • check if it is in the nest and correct it if necessary;
  • collect the phone.


We hope the above has helped you. Otherwise, we do not recommend experimenting further without diagnostics. Recovery from impacts and replacement of parts cannot be done without the appropriate equipment, so as not to finally lose your smartphone. Contact professionals for help and your device will serve you for a very long time 🙂

Refresh iPhone in Recovery Mode

If a hard restart doesn’t work, try updating your iOS in Recovery Mode. This method allows you to reinstall the operating system without changing the data stored on the device. However, it is only effective if the logo screen appeared as a result of a glitch during the iOS update process. If the problem is related to the hardware “stuffing” of the device or jailbreak, this method will not help.

To update iOS in recovery mode, you need a desktop computer with the latest iTunes and a USB cable.

On iPhone 7, you can activate recovery mode by simultaneously pressing and holding the power button and the volume down control until the smartphone turns off. Then, on your smartphone, hold down the volume down button and while continuing to hold it, connect the iPhone using a USB cable to a computer with iTunes installed. After about 10 seconds, the iPhone will display the iTunes logo with the cable, and iTunes will display a notification on the computer that the iPhone has been detected in recovery mode.

On earlier iPhone models, you can activate Recovery Mode by simultaneously pressing and holding the Power button and Home button until the smartphone turns off. Then, on your smartphone, hold down the Home button and while continuing to hold it, connect the iPhone using a USB cable to a computer with iTunes installed. After about 10 seconds, the iPhone will display the iTunes logo with the cable, and iTunes will display a notification on the computer that the iPhone has been detected in recovery mode.

The above steps will allow you to update your device’s firmware. If the logo screen does not disappear, try all over again, but select “Restore”. Please note that in this case, all iPhone settings will be reset to factory settings (all data will be deleted). You can restore them from backups.

Apple on iPhone: what to do if your smartphone freezes or reboots on the boot screen

Sometimes iPhone owners are faced with an unpleasant phenomenon. the Apple logo appears on the screen and the device stops showing signs of life. Typically, this happens after installing updates or crashing applications. iPhone freezes or restarts “on apple”, making it impossible to continue using it. What to do in this case, we will tell you below.

What to do if the logo screen does not disappear and the iPhone is still not working

If rebooting your device, updating the firmware, and even performing a factory reset didn’t work, the issue might be hardware related. In this case, it is best to contact a service that specializes in repairing Apple products.

Factory reset (flashing) iPhone in DFU mode

You can get rid of the logo screen by performing a factory reset in DFU mode. In this case, all data on the device will be lost, so make sure you have all the necessary backups before proceeding.

We talked in detail about how to enter the iPhone into DFU mode in this article.

iphone, white, screen, apple

If the problem is jailbreak and you can’t uninstall the tweak or app, a factory reset in DFU mode is most likely the only option.

Force restart iPhone

Sometimes a forced restart of the device helps to get rid of an apple on a dark screen. iPhone 7 and newer models can be rebooted by simultaneously pressing and holding the power button and volume control for 10 seconds.

To reboot older models, press and hold the Power and Home button for 10 seconds.

We talked about the reboot in more detail in this article.

Why iPhone freezes and restarts on apple

If the iPhone screen suddenly goes blank, a logo appears on it, and then nothing happens, then something went wrong with the software. Reasons for the appearance of the logo screen: