Laptops and Tablets • Recommendations and advice

iPhone

iPhone thinks headphones are connected

Why the sound may disappear?

What to do if sound drops out during calls or music playback?

There are several ways to solve the problem:

  • if the headphones are charged, they should be switched to the operating mode of one headphone when talking on the phone;
  • The most common problem is the iPhone‘s Bluetooth function not working properly. To fix this problem, you need to restart your phone;
  • if the above methods do not work, you should restart the headset;
  • if you disable the “Auto-detect ear” option, this will narrow the functions of the gadget and eliminate the reason for the lack of sound.

One of the headphones is quieter on iPhone 5. what to do?

Over time, any device fails, temporarily fails or breaks down completely. Our task is to determine the type of breakdown and decide what to do. repair or buy a new one. often than not, almost any breakdown can be repaired. But the question is different: is it worth the time and money. One of your headphones on the iPhone 5 may be playing weaker than the other. This means that we can probably solve such a breakdown at home.

First, make sure that the headphone mesh is clean, the port sees connections, and the wire is intact:

  • Open the settings of your fifth iPhone; Open the iPhone settings
  • Next, select the item “Basic”; Select the item “Basic”
  • We find the line “Universal access”; Click on the line “Universal access”
  • We get to the window with the settings for sound and other parameters.

This window contains a knob that allows you to adjust the balance between the left and right channels on iPhone 5. Adjust them so that both headphones sound roughly the same. By default, the slider is centered. Suppose, in your case, there is a problem with the left earbud. try to move the balance slightly to the right. In this case, the overall volume will be slightly underestimated. But on the other hand, you will be able to receive sound of equal volume from each earphone.

Adjusting the sound after adjusting the channel balance

When the sound balance is adjusted, try increasing the overall volume using the buttons on the cabinet or programmatically. There will be no noticeable loss of sound. If your headphones cannot see the iPhone X / 8/7/6/5 device, or the sound of one of them is quieter than the other, use all the above methods to solve the problem.

Use dry wipes to clean

As already mentioned, this iPhone problem usually occurs when the headphone jack is damaged or there is a lot of debris. Therefore, it is imperative to clean the headphone jack properly. Take a cotton cloth and clean the hole several times. Make sure you do not spray water on the connector when cleaning the connector.

Some users find that a toothbrush helps to clean dirt and dust from the headphone jack. You need to clean it with a light touch, you can add a little alcohol (you cannot add water and vodka). Make sure your phone is turned off before inserting any instrument into the headphone jack.

Another way is to make your own cleaning brush using a paper clip and clear tape. Bend the paperclip straight and wrap the tip of the sticky side of the tape outward. Gently insert the sticky tip into the headphone jack, pressing lightly on the side to pick up dust and dirt. Remember to turn off your phone before you start doing this.

You can also roll a small piece of tape inside out with the sticky part facing out. Gently insert the tape into the headphone jack port and squeeze the side of it. Leave long ends for easy removal.

In addition, there is a small hole on the inside of the connector, where dirt and dust often gets stuck. Try cleaning it with a pin and a little rubbing alcohol. This should help remove headphone mode on iPhone and iPad.

How to turn off headphone mode on iPhone 6, 7, 8, X and iPad?

Is your device stuck in “headphone mode” and only playing back after plugging in the headphone? In this article, we have collected all the ways to turn off the headphone mode on iPhone 5, 6, 7, 8, X, SE, these methods are also suitable for iPad and iPod.

Change system language

The easiest and most affordable method to restore iPhone operation in headset connected mode is to change the language settings. If the default system language is Russian, you should replace it with a different one, and then restart the device. This can be done as follows.

  • Enter the menu and select “Settings”.
  • In the section find the item “Basic”.
  • Scroll down the screen to select “Language and Region”.
  • On the tab that opens, click on the item “Language (device name)” or “Language iPhone”.
  • Choose any other language, for example. English, and press the “Done” button.
  • Confirm the action in the notification request that appears on the screen.
READ  How to take screenshots on iPhone 10

If everything was done correctly, the connected headphones should work. Then it will remain to return to the previous language (Russian) and enjoy listening to your favorite music.

How to Connect Headphones to iPhone. Wireless Models

With a wireless headset, things are much more complicated. It will not work to connect it to the iPhone using the previous method, since a completely different algorithm is needed here. It is noteworthy that it is common to almost all Apple devices and iPhone versions.

The procedure for connecting a wireless device to an Apple device is as follows:

  • Turn on the headphones.
  • Activate the function of connecting to an unknown device. This can be done by pressing the button and holding it for 2-3 seconds.
  • When the search is activated, you need to turn on the power.
  • Wait until the indicator blinks in blue (sometimes, to call it, you should use the key with the designation Bluetooth).

Then go directly to the phone.

  • Open a menu or shortcut bar.
  • Click on the gear icon to enter “Settings”.
  • In the “Network” section, select “Bluetooth” and activate the connection.
  • Select wireless headphones from the list of available devices.

After completing the described procedure, the phone will set the headset status to “Connected”. A new icon will appear at the top of the screen next to the charging indicator, indicating an active connection.

How to reset headphones (Airpods)

Rebooting the headphones is very simple and quick, it takes no more than 30 seconds.

  • put the headphones in the case;
  • on the back panel of the case, press the button and hold it for 30 seconds;
  • when the indicator turns orange, it means that the operation is finished, close the case;
  • open the case next to the device and Airpods will connect automatically.

Make a backup before fixing “iPhone thinks headphones are plugged in

Whenever you try to fix the iPhone thinks the headphones are plugged in or As for your iPhone, be it software or hardware, you should back up your data. Now when you go to the Apple Store and ship your iPhone, they have no time to back up your data and restore after a fix. that would be great, but they are very busy!

Fifth: hardware problems

If none of these issues helped and your iPhone thinks the headphones are stationary, there is likely a hardware issue. It could be a damaged headphone jack or a deeper internal problem. This is rare, but it does happen.

PS: switch to fix them now if your iPhone microphone is not working or iPhone flashing Apple logo issue.

Third: unplugging headphones too quickly

If you pulled the earbuds out of your iPhone too quickly, it may not have detected the disconnect. This will make your iPhone believe your headphones are still plugged in, which explains the problem.

All you have to do to fix this problem is plug the headphones back in and take them out. Do this a few times and with all hope you will fix it.

How to fix “iPhone thinks the headphones are plugged in” with ease

iPhone thinks headphones are plugged in is not a new problem It affects all generations of iPhone and may prevent other iPhone features from working properly. Features, including your ringtones and alarms, will not be able to alert you and you will not be able to listen to your music. Needless to say, if your iPhone thinks the headphones are in, then you’ll want it to be quickly fixed.

There are many reasons for this error, and there is no one easy solution for everyone. Every person who has this problem will have to try several different things in order to find the best solution for them. To help you with this, we have put together a guide containing the solutions we think will be the most effective.

What is iMyfone iTransor (Formerly: iMyFone D-Port iPhone Data Exporter)?

This part of iMyfone iTransor. best way to fetch data from iOS device. It offers many possibilities to manage your data, it is very flexible and the best way to ensure that your iPhone data is properly backed up.

  • Back up data directly to your computer to fix iCloud contacts not syncing.
  • Preview your iPhone data before you made a backup.
  • Download and extract backups from your iCloud account.
  • Ability to retrieve various types of data.
  • Compatible with the latest iOS and iPhone models.

The flexibility this program alone offers is fantastic. When it comes to data extraction, this is undoubtedly the best software out there.

Fix iPhone thinks headphones with iMyFone Fixppo

No matter what iOS issue you are facing, follow these steps. You will quickly find it iMyFone iOS System Recovery is easy to use and effective in fixing iPhone problems.

#one. Download and Install iMyFone Fixppo iOS System Restore on Your Computer.

# 2. Run the program and connect your iPhone via USB cable.

# 3. From the main menu, tap Standard Mode Option. If you completed this solution but it still doesn’t work, try Advanced Mode instead.

#four. You will now be asked to put your iPhone into DFU mode. If you are not sure how to do this, follow the instructions on the screen.

#five. After iMyFone Fixppo iOS System Recovery detected DFU mode, some information will be detected about the device.

# 6. Confirm that all information is correct, then click “Download” to continue.

# 7. The iOS firmware will be downloaded. Once the download is complete, iMyFone will reinstall the firmware on your iPhone.

Now you can listen to music without thinking that you have headphones in your iPhone. Provided it is a software problem, iMyFone Fixppo can effectively fix most iPhone problems.

READ  How to pause video on iPhone

Also, if you need to unlock your phone, here is the iMyFone LockWiper Review.

Reasons for “iPhone thinks headphones are in

How to Use iMyfone iTransor iPhone Data Exporter

Before trying to fix an iPhone thinks the headphones are plugged in, follow our guide below. These steps will show you how to back up your iPhone data as quickly as possible.

#one. Download, install and run iMyFone D-Port Pro (Now iMyfone iTransor) on your computer.

# 2. If you haven’t connected your iPhone yet, connect it with a lightning cable.

# 3. Click on “Back up and export from device”, and then on the next screen select “Export data”.

#four. Browse through the different data types and click Select All Or select the specific data types you want to back up.

#five. Click NextContinue. Your iPhone will be scanned quickly, and once the scan is complete, you can view the data stored on the device.

# 6. Again, check the box next to “Select All” Or browse the files that were found and select specific files to back up.

# 7. Finally, click “Export” and choose a location to save the data on your computer.

iMyFone via iTunes is definitely perfect. You can select specific files to back up, preview the data before backing up, and save it anywhere.

Why iPhone thinks headphones are plugged in?

There are several reasons that can lead to this problem. The most common are dirt, dust or water particles entering the connectors.

In addition, the smartphone may start to work incorrectly due to high humidity or mechanical damage.

How to Disable Headphone Mode on iPhone: Why iPhone Thinks They’re Connected

Both the iPhone and iPad have two different volume modes called Headphones and Ringer. These modes work separately from each other, allowing the smartphone to automatically change the volume level when the user disconnects or connects headphones.

The volume level set in the “Headphones” mode will turn on every time this gadget is connected, while it will not affect the volume level in the call mode, allowing you not to change the sound level every time. When headphones are connected to the iPhone, the current mode is displayed on the screen as a window with a bell or speaker.

In some cases, when the headphones are disconnected, the mode may not change automatically and the smartphone will remain in the “Headphones” mode instead of going to the “Call” mode. In this case, the device stops playing sound.

How to turn off Headphone mode on iPhone?

In this situation, you need to connect the headphones to the iPhone and listen to any sound in them, for example, the sound of the lock screen or the clicks of the on-screen keyboard. The sound should only be played in the headphones, not from the speaker, otherwise the device is faulty. After that, you need to disconnect the headphones and check the sound on the device speaker using the side buttons. The volume indicator in this case should be in the “Call” mode.

If, when the headphones are disconnected, the “Headphones” mode is still displayed on the iPhone. do not rush to give the device to specialists from the service center. there are several ways to fix this problem yourself at home. Before trying the recommendations described below, you need to remove the cover and analyze the last manipulations with the device.

  • Reboot and charging cable. First, try turning off and on your iPhone (with headphones disconnected) with the charging cable connected. If this method does not help, you can do the same, but with the power adapter connected to the outlet and applying a hard reset instead of a normal shutdown.
  • Toothpick. If the headphone jack is rarely used, it can become clogged with dust and dirt from s. It can be removed from there with a toothpick, needle, cotton swab or corner of paper, after turning on good lighting and making sure there are foreign elements.
  • A vacuum cleaner. Moisture may accumulate in the connectors in cases where the device is very wet or has been dropped into water. It can be pulled out with a vacuum cleaner, however, if a lot of time has passed since the moment moisture got into the phone, this method may not help due to the appearance of rust on the contacts.

Connecting a wireless headset

Connect a wireless headset (or any other Bluetooth device for audio playback) to iPhone. In this case, it is worth observing the following sequence of actions:

iphone, thinks, headphones, connected
  • Connect wired headphones;
  • Create a pair with a Bluetooth device and output sound to it;
  • Disconnect wired headphones;
  • Disable the wire-free device.

Change of headphones

If you have used inexpensive (very inexpensive) headphones, then the problem is most likely with them. Connect another device and restart iPhone. To avoid such problems, use branded original headphones and headset.

Causes of the problem

There can be many reasons why the iPhone does not play audio through the speaker. First, let’s figure out how it works. The smartphone “knows” about the state of the headphone jack by measuring the resistance of the circuit. When the contacts inside the connector are closed, the phone “understands” that the headphones are connected and the sound needs to be output through them, and not through the speaker. Accordingly, the speaker is muted and the signal is sent to the connected headphones. However, false short circuits are also possible without connecting devices, then the speaker of the phone is disconnected by it itself, and the sound empty sound jack.

Here are the most common reasons for this:

  • The problem with the headphone jack itself on the smartphone.
  • Poor quality headphones coupled with software glitch.
  • Software glitch right at the moment the plug is pulled out.
  • Unlicensed software.

These are the most common causes of a problem. We will analyze how to eliminate.

Reboot

Sometimes, simply restarting your iPhone with a wired headset connected is enough. If a regular reboot does not help, it is worth resorting to a Hard Reset. Usually, for this you need to simultaneously hold down two buttons: Power and Home. It is necessary to keep them until the brand logo appears on the screen.

READ  The screen on the iPhone has increased what to do

Cleaning the connector

It boils down to cleaning the headphone jack (for the iPhone 6 it’s 3.5 mm, for the seventh and older Lighting). Dust can simply get into the connector or it can oxidize if moisture gets in.

For cleaning, you can use a cotton swab, needle or toothpick. Additionally, the walls of the connectors can be treated with alcohol.

iPhone Stuck In Headphones Mode? Here’s Why & The Fix!

Another option is to blow through the hole. Alternatively, you can use a vacuum cleaner. If you don’t mind spending money, you can buy a can of compressed air, which is designed to clean electronics.

Another option: several (possibly up to 10-15) times turn on and off the headphones in the phone. This operation will also allow you to clean the connector, because the headphone plug fits snugly into the hole.

It is worth noting that the manufacturer’s technical support recommends the latter method, since in this case there is no need to insert foreign objects into the connector, which means that the risk of damaging the inside of the smartphone is minimal.

How to fix

So, the sound on the iPhone disappeared, it says that the headphones are connected, what to do in this case. Most often, the problem can be solved literally within a few minutes by following the tips below.

When the iPhone thinks it has headphones in it

Apple smartphones are known to be some of the most reliable. However, even with them, problems sometimes arise. A fairly common failure is the lack of sound from the speakers. At the same time, the gadget writes that headphones are inserted into the smartphone, although the connector is empty. This problem occurs in the iPhone 5, 6 and others, in all where there is a jack for connecting a wired headset. We will understand the causes of the problem and how to fix it.

Jailbreak

The problem with sound playback may be related to the installation of unlicensed software. If the Jailbreak was installed by an inexperienced user, it often becomes source of problems. All tweaks will have to be removed. If none of the proposed methods helped, you will have to contact the service center. Perhaps the cause of the problem is an internal failure of the iPhone. Trying to fix it yourself is not worth it.

The phone shows that headphones are connected: what to do?

On almost all modern models of phones and smartphones, when accessories are connected, an indicator appears notifying the user of what has been specifically connected (headphones, Bluetooth headset, etc.).

But, if the phone shows that the headphones are connected, although they are not, then there is definitely a problem. Below we will tell you how to solve it.

Possible problem

If the phone says that the headphones are connected, but restarting does not help, then in the case of wired headphones there may be a problem with the connector.

The connector means the headset jack. 3.5 mm, USB Type C, Ligthing

It is possible that a foreign object or moisture has got into it.

The ingress of moisture on the contacts can cause not only constant system failures, but also provoke corrosion, which, once started, will disable the entire device in a short period of time.

Possible problem

Your phone probably “thinks” that the headphones are plugged in due to a system failure. This may apply to both wired and wireless headphones.

Failure can occur for the following reasons:

iphone, thinks, headphones, connected
  • The phone has been used for a long time and the motherboard has overheated
  • The headphones were removed while the melody was playing, as a result of which the device has not yet had time to complete all previous processes and freezes
  • The smartphone was dropped along with the connected headphones, after which the headset was hastily removed.

The best solution in this case is to simply reboot the phone. If the problem was a system glitch, after a reboot, the indicator will turn off by itself.

If a serious system failure occurs and the reboot does not help, then in order to fix it, you will need to reset the smartphone settings to the factory settings. Before performing it, be sure to back up your data.

What to do?

First of all, inspect the headphone jack for foreign objects. These can be both specks and pellets from clothes. They can be removed carefully with a toothpick or needle. But be careful not to damage the contacts.

iPhone Thinks I Have Headphones Plugged In. How To Fix

If there are no foreign objects, check for moisture. If it is there, you can carefully remove it with a needle, after winding a little cotton wool around it. In addition, you can dry the connector with a regular hair dryer in a cold mode.

If you are well versed in the structure of your smartphone, you can try to disassemble it and clean the contact area of ​​the headphone jack with a special compound.

However, given that many modern models are made very cleverly, it is better to abandon independent manipulations and hand over the device for repair to a service center.

In this article, we told you what to do if the phone says that the headphones are connected. We hope the advice helped you. If you have questions. write in the Комментарии и мнения владельцев.

Read other instructions for mobile phones and smartphones in the section Instructions and help for smartphones on our website.

HSIDG.COM 2021