Laptops and Tablets • Recommendations and advice

iPhone

iPhone does not see wired headphones what to do

Table of Contents

One of the earbuds is quieter on iPhone 5.what to do?

Over time, any device fails, temporarily fails, or breaks down completely. Our task is to determine the type of breakdown and decide what to do. repair or buy a new one. often than not, almost any breakdown can be repaired. But the question is different: is it worth the time and money. One of your headphones on the iPhone 5 may play less well than the other. This means that we can probably solve such a breakdown at home.

First, make sure that the headphone mesh is clean, the port sees connections, and the wire is intact:

    Open the settings of your fifth iPhone;

This window contains a knob that allows you to adjust the balance between the left and right channels on iPhone 5. Adjust them so that both headphones sound roughly the same. By default, the slider is centered. Suppose, in your case, there is a problem with the left earbud. try to move the balance slightly to the right. In this case, the overall volume will be slightly underestimated. But on the other hand, you will be able to receive sound of equal volume from each earphone.

When the sound balance is adjusted, try increasing the overall volume using the buttons on the cabinet or programmatically. There will be no noticeable loss of sound. If your headphones cannot see the iPhone X / 8/7/6/5 device, or the sound of one of them is quieter than the other, use all the above methods to solve the problem.

What to do if the iPhone 7 does not see the Airpods

Apple’s wireless Airpods also occasionally cause problems for users. In our case, Airpods do not want to connect to the iPhone. Let’s analyze this situation in order. This headphone model connects to mobile devices quite simply. You need to turn on Bluetooth on the iPhone 7 and open the case cover on the wireless headphones.

A window appears on the smartphone screen with the inscription Airpods and the connect button.

After clicking, the headphones should automatically connect and they will be visible in the list.

You can find them in the section with connected devices.

If this does not happen. restart your phone and try to reconnect the headphones.

Disconnect other Bluetooth devices, they may interfere with the current connection. Move other Bluetooth devices away from your smartphone and headphones. If you tried to connect them to iPhone 7, but they do not play after connecting. remove pairing and reconnect.

You can disconnect Airpods in the Bluetooth connected devices window. Select the one you need from the list and go to the options to select the item to delete.

iPhone X / 8/7/6/5 can’t see headphones

Despite the fact that Apple creates the best quality devices, incidents often happen to them. In the article, we will consider what to do if the iPhone versions X / 8/7/6/5 does not see the connected headphones. And also we will analyze the cases when the device sees the earbuds, but they do not reproduce sound.

What to do if there is no sound from the iPhone X headphones

Included for each version of the iPhone are headphones. EarPods. These are not wireless Airpods yet, they have a wire. But they sound good enough. Often, when connected, the smartphone does not respond to them.

None of the settings help you connect your headphones. If the device has been serving you for more than a month, it is quite possible that the contacts in the smartphone are clogged, clogged with dust and dirt.

This happens while we put the phone in our. where other objects may be.

Ladies’ handbags can also be source of small litter. Due to a certain layer of dirt, the connector may not fully connect. And don’t snug enough to the port pins on the iPhone. To clean it, preference should be given to a wooden device: a pointed match, toothpicks, etc.

Do not use metal tools. They can harm the fragile contacts of the port.

Use a flashlight to get a better look at the dirty areas of the port, because of which the iPhone does not see the wired headphones. At the end of a toothpick or match, you need to wind a little cotton wool to better collect dirt.

The tip can also be dipped in rubbing alcohol. But not abundantly, so that it does not spread inside the port. The rubbing alcohol will help break down dirt better. Use your wand until you have cleaned out the entire port. Clean the connector on the headphones. It may need cleaning too.

Why iPhone 6 doesn’t see wired headphones

If you connected headphones to your smartphone, but it does not see them, try to solve this problem with simple methods. If the gadget did not find the wired earbuds, disconnect the wire from the port on the smartphone. Try restarting your iPhone 6. The problem may be with the headphones themselves.

To check this, try connecting others. Accordingly, if you managed to connect others. the reason has been found, devices need to be replaced or repaired.

For wired headphones, most of the problems are due to port contamination. Therefore, always check for the presence of impurities in it. Check the wire itself. Perhaps in some place it was bitten by pets or damaged under other circumstances.

Other headphones with the same port can also detect this. The reasons may be in the very port to which the earbuds are connected on your iPhone 6. It may be out of order. this will help to determine the service personnel. If other methods do not help determine the true cause of the breakdown.

Performing a factory reset on Airpods

No matter how accurate you are, headphones start to malfunction over time. Malfunctions can manifest themselves in small things, for example, sometimes one earphone itself turns off. Or the indicator that indicates the status of the device is off. All of these problems can be resolved by restarting and resetting Airpods. After which the gadget will work stably again.

To reset, you need to put the headphones that your iPhone cannot see in their case:

    Open the lid of the case. Press and hold the button located on the back of the case;

How to reset headphones (Airpods)

Rebooting the headphones is very simple and quick, it takes no more than 30 seconds.

  • put the headphones in the case;
  • on the back panel of the case, press the button and hold it for 30 seconds;
  • when the indicator turns orange, it means that the operation is finished, close the case;
  • open the case next to the device and Airpods will connect automatically.

Why the sound may disappear?

What to do if sound drops out during calls or music playback?

There are several ways to solve the problem:

  • if the headphones are charged, they should be switched to the operating mode of one headphone when talking on the phone;
  • The most common problem is the iPhone’s Bluetooth function not working properly. To fix this problem, you need to restart your phone;
  • if the above methods do not work, you should restart the headset;
  • if you disable the “Auto-detect ear” option, it will narrow the functions of the gadget and eliminate the reason for the lack of sound.

One earbud is quieter than the other

To solve such a problem, do the following:

  • check the charge of both headphones, because one may be discharged;
  • check the hole for debris;
  • if dust or debris is found on Airpods, you need to carefully remove it;
  • check the volume;
  • if after all these manipulations the sound quality on the device is not clear, then you should contact a specialist to fix the device.
iphone, does, wired, headphones

iPhone does not see headphones, what to do?

There are several types of headphones for iPhones: traditional wired, with which each of us is familiar, and wireless of the new generation. Apple gave them the name Airpods. After the release of the headset and its appearance on the shelves, the manufacturer faced complaints from users that there were flaws in the Airpods. Let’s consider this problem in more detail in this article and try to find solutions, for what reasons the iPhone does not see the headphones and why the iphone headphones do not work.

First, we’ll follow the correct path to consistently set up Airpods:

  • Go to the “Home” window;
  • Open the case with Airpods and place it next to the iPhone;
  • The installer splash screen appears on the phone;
  • Next, we find the “Connect” button and select “Finish”.

If you set Hey Siri on Airpods (2nd generation), it will work through your headphones. When this option is used for the first time, the options for configuring it are initially opened. When iCloud is working, the headset syncs automatically.

iPhone does not see headphones

If for some reason iphone headphones do not work, you need to do the following:

  • check if the Bluetooth function is enabled on the phone;
  • restart your smartphone or headset;
  • check the battery charge level, if it is low, then connect it to the network;
  • scan ports for dust;
  • check the working condition of the cable and damage to the connectors;
  • view the mesh on one and the second earbuds, if you find debris, then remove it with a soft brush.

What you can do with headphones?

Only one earphone works

There are 3 ways to fix this error:

  • Place your Airpods in the case for 10 seconds as the battery may be low. After recharging, the headset is taken out and put on to check the working condition.
  • In the event that the actions of the first point did not help, you must turn off the Bluetooth option on the device to which the headphones are connected and turn it on again. If you fail, restart your headset.
  • It often happens that the iPhone simply does not see the headset. In such situations, you should go to the Airpods settings and select the “Forget device” item, then connect both headphones as new.
READ  How to log into iPhone if you forgot your password

Charging for Airpods Headphones

To charge the headset, place it in the case and close the lid, after which the headphones are charged automatically. This kind of charging in a wireless case or standard headset case is suitable for the first and second generation Airpods. The battery in the case or case can be recharged using the Apple Lightning USB cable.

IPhone / iPad or iPod Touch earphone stopped working, how to fix ?

Check your phone settings

Check the settings of your device and whether turn on the phone call function in automatic mode. If you haven’t enabled, skip to the Basic section. Universal access. Sound source. Automatically.

iPhone Headphones Not Working! ��[5 FIXES & TIPS!]

Headphones do not work on iPhone 11 Pro / 11 / XS / XR / X / 87/7 Plus / SE / 6s / 6, what to do ?

Owners of iOS devices face a variety of problems in the process of using their gadget. For example, after connecting headphones to an iOS device, the sound is heard from the speakers and not from the headphones, the iPhone does not see the headphones, or after the headphones are disconnected, the headphone volume indicator continues to be displayed on the iPhone when adjusting the volume. But, as a rule, they are all solvable, and in this article, we will provide several methods to fix iOS device headphone problems.

Clean the headphone jack. (Does not apply to Airpods)

Long-term use without proper maintenance can damage something as wonderful as the iPhone’s headphone jack. You need to clean the headphone jack regularly. You need to get the most ordinary toothpick, a piece of cotton wool and a little alcohol. You can also use a cotton swab.

Reset all settings

How to turn off headphone mode on iPhone? If the above methods do not help you turn off the headphone mode on iPhone, you can reset all settings. Go to settings. Basic. Reset. Reset all settings. This method can fix other iPhone problems too, such as black screen on iPhone, iPhone not showing incoming calls.

Switching the system language from Russian to another language

You can switch the system language of the device from Russian to another and then restart the device. If iPhone returns to normal, change the language to Russian.

How to turn off headphone mode on iPhone via utility

After restarting the system, the iPhone, iPad or iPod Touch still does not see the headphones. In this case, we recommend that you use the Tenorshare ReiBoot program, which is able to solve most of the iOS errors. With Tenorshare ReiBoot, your device will enter / exit recovery mode with all data saved, after which the error will be corrected. Detailed instructions for using the program are below:

  • Step 1 Download the Tenorshare ReiBoot program from the official resource, and then install it on your Mac or Windows. Please note that the program supports both platforms.
  • Step 2 Next, you need to connect your iPhone, iPad or iPod Touch to your computer using a USB cable. After connecting the device, run the program.

Step 3 Click on the active button “Enter recovery mode”. Wait for a while, the iTunes logo will light up on the display of the mobile device.

Step 4 Now click on the “Exit Recovery Mode” button.

Your device will be rebooted and ready to go. Then try connecting the headphones again and make sure the iPhone / iPad / iPod Touch recognizes them.

If the problem has not been resolved yet, Tenorshare ReiBoot software is available in standard and professional versions. You can use the Fix all iOS problems feature, which can fix most of the iOS errors. For example, iPhone keeps restarting, iPhone won’t turn on, etc.

Check your phone settings

Check the settings of your device and whether turn on the phone call function in automatic mode. If you haven’t enabled, go to General. Accessibility. Sound Source. Automatic.

Apple wired headphones won’t connect

At the very beginning, let’s remember that all models up to the iPhone 7. smartphones had a built-in 3.5 audio jack (mini-jack). This is the standard headphone jack used by almost all portable equipment manufacturers. But, starting with the “seventh” model, the iPhone lost this connector, instead, EarPods began to be connected through a single and universal Lightning port. Therefore, the breakdowns of different iPhone models are different.

As a rule, the reason that the iPhone does not see wired headphones is a faulty connector. In the case of the 3.5 audio jack, it is often clogged with dust and dirt, foreign objects and various liquids get inside. This leads to corrosion of the socket itself, or of the internal contacts. The same breakdown factors apply to the Lightning port, with the only difference that in most cases it is not only the headphones that stop working. iPhone refuses to charge, does not connect to a computer, you need to constantly wiggle the plug in the connector to “catch” the desired position.

In addition to the problem with the connector, the cause may also be a breakdown of the audio codec (iPhone sound chip). In this case, the sound will disappear not only in the headphones, but also in the speakers. A separate category can be attributed to various software failures that do not happen very often. If the system update is unsuccessful, after a poor-quality repair or flashing of the smartphone, problems may arise with the detection and identification of the connected headphones.

Switching the system language from Russian to another language

You can switch the system language of the device from Russian to another and then restart the device. If iPhone returns to normal, change the language to Russian.

Wired headphones don’t work on iPhone

Clean the headphone jack. (Does not apply to Airpods)

Long-term use without proper maintenance can damage something as wonderful as the iPhone’s headphone jack. You need to clean the headphone jack regularly. You need to get the most ordinary toothpick, a piece of cotton wool and a little alcohol. You can also use a cotton swab.

Why iPhone 6 doesn’t see wired headphones

If you connected headphones to your smartphone, but it does not see them, try to solve this problem with simple methods. If the gadget did not find the wired earbuds, disconnect the wire from the port on the smartphone. Try restarting your iPhone 6. The problem may be with the headphones themselves.

Problems with wired headphones

To check this, try connecting others. Accordingly, if you managed to connect others. the reason has been found, devices need to be replaced or repaired.

For wired headphones, most of the problems are due to port contamination. Therefore, always check for the presence of impurities in it. Check the wire itself. Perhaps in some place it was bitten by pets or damaged under other circumstances.

Headphone wire is damaged

Other headphones with the same port can also detect this. The reasons may be in the very port to which the earbuds are connected on your iPhone 6. It may be out of order. this will help to determine the service personnel. If other methods do not help determine the true cause of the breakdown.

This is interesting: how to make a keyboard on Android like on an iPhone.

One of the headphones is quieter on iPhone 5. what to do?

Over time, any device fails, temporarily fails, or breaks down completely. Our task is to determine the type of breakdown and decide what to do. repair or buy a new one. often than not, almost any breakdown can be repaired. But the question is different: is it worth the time and money. One of your headphones on the iPhone 5 may play less well than the other. This means that we can probably solve such a breakdown at home.

Dirty mesh headphone

First, make sure that the headphone mesh is clean, the port sees connections, and the wire is intact:

  • Open the settings of your fifth iPhone; Open iPhone Settings
  • Next, select the item “Basic”; Select “Basic”
  • We find the line “Universal access”; Click on the line “Accessibility”
  • We get to the window with the settings for sound and other parameters.

This window contains a knob that allows you to adjust the balance between the left and right channels on iPhone 5. Adjust them so that both headphones sound roughly the same. By default, the slider is centered. Suppose, in your case, there is a problem with the left earbud. try to move the balance slightly to the right. In this case, the overall volume will be slightly underestimated. But on the other hand, you will be able to receive sound of equal volume from each earphone.

Adjusting the sound after adjusting channel balance

When the sound balance is adjusted, try increasing the overall volume using the buttons on the cabinet or programmatically. There will be no noticeable loss of sound. If your headphones cannot see the iPhone X / 8/7/6/5 device, or the sound of one of them is quieter than the other, use all the above methods to solve the problem.

It’s interesting: how to make Memoji on iPhone.

iPhone does not see wired headphones (EarPods and others)

The problem with connecting wired headphones is most often associated with various physical problems. And first of all, you should check the 3.5 mm MiniJack connector through which the connection is made. It is noteworthy that in the iPhone 7/7 Plus and newer, the headphones are connected via a lightning connector, therefore, you need to inspect it. By the way, ordinary headphones can also be connected to the latest iPhones, for this you need to use an adapter.

  • Restart your iPhone. This can be done by holding the power button and then turning it on.
  • Check for any debris or dust in the connector. You can remove foreign objects with a needle or toothpick.
  • Check the integrity of the headphones, inspect the wires, and look for kinks, damage, and exposed wiring. If any deficiencies are found, try to fix them or replace the accessory.
  • If iPhone has a case, remove it and try connecting headphones.
  • Try using other headphones. If the problem persists, contact the service center.
  • Adjust the volume, it may be off.

Determine the state of the audio output and drivers on the PC

Are the drivers installed and does the computer see the audio output? We define this in the “Audio Inputs and Audio Outputs” item in the Device Manager. We open it in this way, Windows 10:

Windows 7. Start. Control Panel. System and Security. Device Manager.

The laptop or computer does not see the headphones

The most common reason why your laptop or desktop computer does not see headphones (wired) when connected is an unconfigured driver (utility), or a missing or outdated sound driver.

Consider all the reasons why a stationary PC or laptop does not see headphones (wired), from the most popular to the least popular. We will consider, using the example of Windows 7 and Windows 10.

The instructions for connecting to a PC are relevant for all wired headphones:

  • Headphone mini-jack (regular wired headphones).
  • Forked mini-jack (headphones with microphone). A detailed connection of headphones with a microphone (with a bifurcated or combined mini-jack) is described in a separate instruction.
  • And USB headphones. The only caveat is that USB headphones receive sound in digital form, they must be defined by the computer as a separate audio device, respectively, it must be selected as a sound output device, in addition, drivers must be installed. Most often, the necessary drivers for USB headphones to work are installed automatically when they are connected. Sometimes you need to install them yourself by downloading them from the manufacturer’s website. You may also need to install proprietary software, which can also be found on the official website.
READ  How to enable caller ID on iPhone

Updating drivers often fixes the problem when the laptop or PC does not see the headphones.

The easiest method: right-click on the desired device, in the “update driver” menu.

  • You can update the driver by downloading it from the official website of the audio card manufacturer, or through the driver update program.
  • If you have a Realtek chip (a standard sound card built into the motherboard), then the new driver versions can be downloaded here. If the manufacturer of the audio card is different, download it from their website. Downloaded, installed, rebooted the PC. everything is normal.
  • There are interesting programs for automatic driver updates. For example IObit Driver Booster. Install the program, and then through it. the necessary drivers (sound, at least).

Setting up sound in Windows itself

If, after installing the drivers and setting up Realtek, the computer still does not see the headphones, then the wrong device for playing sound by default is probably selected in Windows.

In Windows 7 we go along the path: “Start”. “Control Panel”. “Hardware and Sound”. “Sound”. In Windows 10, you can open the context menu in the tray on the volume icon (right-click), “Open sound settings”, on the right. “Sound control panel”. Then we change the default device to headphones / speakers, you can try all the options in turn and check them.

Another possible reason why the computer / laptop does not see the headphones is that the sound in Windows is set to low volume or completely muted. We check by opening the volume control in the lower right corner of the clock. Pay special attention to “General” and “Sound”.

Configuring the headphone inputs in the Realtek utility on the computer

If the drivers for the sound card work correctly, but the PC still does not see the headphones, we will adjust the sound for wired headphones on Windows 10.

We configure the inputs in the Realtek utility. It will appear after installing the drivers, in the tray for about hours. If the audio card is from another manufacturer, there must also be an application, the setting is the same. The procedure described in the screenshots is done so that the audio stream goes simultaneously to all input devices, and not only to the speakers (very often the computer sees the headphones as speakers when they are connected for the first time). The same applies to the microphone from the headphones (if it is connected via a separate plug).

For me, for example, ordinary wired headphones are always defined as speakers. To be precise, they are not at all recognized by the computer as a device. The sound continues to go through the audio card (this is what the inscription “Realtek speakers” and the like in the list of audio devices means), and it “decides” which connector to send the signal to.

Apple wired headphones won’t connect

At the very beginning, let’s remember that all models up to the iPhone 7. smartphones had a built-in 3.5 audio jack (mini-jack). This is the standard headphone jack used by almost all portable equipment manufacturers. But, starting with the “seventh” model, the iPhone lost this connector, instead, EarPods began to be connected through a single and universal Lightning port. Therefore, the breakdowns of different iPhone models are different.

As a rule, the reason that the iPhone does not see wired headphones is a faulty connector. In the case of the 3.5 audio jack, it is often clogged with dust and dirt, foreign objects and various liquids get inside. This leads to corrosion of the socket itself, or of the internal contacts. The same breakdown factors apply to the Lightning port, with the only difference that in most cases it is not only the headphones that stop working. iPhone refuses to charge, does not connect to a computer, you need to constantly wiggle the plug in the connector to “catch” the desired position.

In addition to the problem with the connector, the cause may also be a breakdown of the audio codec (iPhone sound chip). In this case, the sound will disappear not only in the headphones, but also in the speakers. A separate category can be attributed to various software failures that do not happen very often. If the system update is unsuccessful, after a poor-quality repair or flashing of the smartphone, problems may arise with the detection and identification of the connected headphones.

Airpods wireless headphones won’t connect

The operation of wireless headphones is in no way related to the presence of external connection ports. As the name suggests, the signal is transmitted remotely, in this case via a Bluetooth connection. Therefore, the cause of the malfunction may lie both in the headphones themselves and in the equipment of the phone.

Most often, the iPhone “does not see” Airpods due to a broken Bluetooth module (or antenna). This microcircuit is responsible for finding and pairing all devices available in the range. After the phone is dropped, hit, or liquid gets into it, the module may fail. It is worth noting that in this case, the iPhone will not see any Bluetooth devices (or the connection will be unstable). As in the previous paragraph, a faulty audio codec (absence of any sounds) may also be the cause. When updating the firmware, a software failure may occur, as a result of which the Bluetooth module will stop working correctly.

Why iPhone doesn’t see headphones?

This is not to say that the problem with connecting headphones is too common on Apple smartphones. But, nevertheless, from time to time, clients come to our Apple Pro service center (Moscow) with a complaint that their iPhone “does not see” the headphones.

In other words, the smartphone does not react in any way to the connection of headphones (wired and wireless), respectively, they do not work (no sound). Let’s look at the reasons for such a malfunction.

IPhone Diagnostics and Headphone Troubleshooting

There are many reasons why iPhone is unresponsive when headphones are plugged in. We have listed just a few, the most obvious ones. But professional diagnostics of a smartphone is indispensable. Come to our Apple Pro service for a specialist inspection of the gadget, after which the exact cause of the malfunction will be established. We will offer the best and most affordable iPhone repair options.

One earphone from the iPhone stopped working: what to do

Unfortunately, the quality of the Apple headphones is poor. Airpods have certainly propelled the company forward in this regard. But after constant use for a couple of months, they also often fail. The most amazing thing is that most often it is one earpiece that breaks, and it is the right one, which contains the microphone and the volume or video recording switch.

It would seem that you have to buy a new accessory or use it in one ear, but there is one catch. All sounds in the phone are reproduced in stereo mode: the song is decomposed into left and right channels. One can hear a voice, and another, for example, the sounds of individual musical instruments. This is why you may not always enjoy the sound quality when listening in one ear.

Airpods may not be supported on older iPhones

The solution to the problem is peculiar, since it does not make the second earpiece work. The point is to set the sound to play only in mono mode. It uses only one canal and all components pass through it to one ear. To switch to mono, you need to go to the phone settings, find “Universal Access” and switch the desired parameter.

How to connect the speaker to the phone via Bluetooth

For users who like to listen to music through speakers wirelessly, the method of connecting a Bluetooth speaker to an iPhone will be relevant. This can be done as follows:

  • Put a speaker or a pair of them in close proximity to the phone to ensure future wireless communication. If the distance is too long, the connection may fail.
  • Turn on the speakers and switch to pairing mode by pressing the corresponding button on the case. If not, then you should carefully study the instructions for use of the speakers.
  • Go to the phone menu and select the “Settings” icon (gray gear).
  • In the general parameters window, find the “Bluetooth” item and go to it.
  • Switch on the module by moving the slider to the appropriate position. After loading, a list of devices in the immediate vicinity and ready to connect will appear on the screen. The speakers will be displayed under the name of their manufacturer or model.
  • Click on the names of the columns and connect to them. Pairing may take some time, most often it takes no more than 2-3 minutes. If the speakers are not visible, you can turn them off and on again or refresh the search list on your phone.
  • After pairing, the speakers are ready to use. You can test them, turn on any melody.

Note! Sometimes, to connect to the speakers, you need to enter a password, which is indicated on their case or box. If lost, please refer to the speaker manual.

Why iPhone can’t see headphones via Bluetooth

Even iPhones, which are the standard of reliable and modern mobile technology, can have problems identifying the headset and other devices via Bluetooth. The most common causes of the problem are:

  • violation of the software integrity of the firmware, physical damage to the motherboard and individual contacts of the wireless module;
  • various software failures both due to unforeseen actions and during updates;
  • conflicts between system and user applications.

Important! Installing software from unverified sources can not only cause the operating system to malfunction and software conflicts, but also the complete or partial inoperability of the gadget.

The adapter must be plugged into the connector through which the iPhone is to be charged

The correct operation of Bluetooth is also affected by increased temperature, moisture, drops or surges in the home power supply during recharging.

Why iPhone doesn’t see headphones. what to do

Many people love to listen to music, it inspires and gives strength. It is better to do this with headphones so as not to disturb others, especially since their tastes may not coincide with the musical preferences of the music lover. Sometimes with accessories of this kind, or rather with their connection, problems arise. Owners of expensive technology are not immune from this, as well as lovers of cheap smartphones. It happens that the iPad, iPod or iPhone does not see the headphones. This material will tell you in as much detail as possible what to do if the headphones on the iPhone 7 do not work, how to set up the connection and what to do if one headphone suddenly stops functioning.

How to set up headphones on iPhone

You usually only need to set up wireless headphones. If they are used for the first time, then you need to make sure that the latest version of the software is installed on the smartphone. After that, you should perform the following actions:

  • Go to Home Screen.
  • Open the case with the headphones and place them next to the phone.
  • Wait for the setting animation to appear on the display.
  • Click “Connect”.
  • In the case of the Pro version of the headset, carefully study all the instructions.
  • Click “Finish”.

The accessory may not connect due to moisture getting into the phone case

Important! If you are signed in to iCloud, the headphones will automatically set up to work with any supported Apple ID-connected devices.

How to turn on wired headphones on iPhone

The headset from the iPhone can be easily used on the iPad or iPod touch. If these are wired headphones with a 3.5 mm jack, you just need to insert it all the way into the corresponding jack on the phone. This should be done as carefully as possible, without connecting the accessory abruptly, moving it along the sides. If everything is done correctly, an icon will appear on the display, symbolizing that all contacts in the socket are closed and the headphones are successfully connected.

READ  So that the iPhone screen does not go out

On iPhone 7 plus, the jet connector is at the bottom

Note! You can perform all these actions with other accessories with a 3.5 mm audio jet, but remember that it makes no sense to connect headphones with an impedance of more than 32 ohms. The power of the phone and battery is not enough to produce the same high-quality sound that they are capable of when connected to a computer or laptop.

What to do if the iPhone 7 does not see the headphones and why

First of all, it is worthwhile to understand that headphones for the iPhone, as well as for some other devices, are divided into classic wired and new wireless generation accessories. The latter were called Airpods, they are gaining popularity, gradually ousting the confusing wired devices from the market.

If the iPhone 7 headphones are not working, then it may be due to a hardware failure.

For your information! Since their release, Apple has received many complaints about design and connection issues. If the phone does not see new wireless headphones, then most likely this happened due to errors in synchronization.

The reason for the lack of sound and the impossibility of identifying the device may be:

  • operating system updates that were incorrectly installed due to failures;
  • dirt, dust or sand has got into the headset jack, as a result of which the phone does not receive contact for detecting and switching to the listening mode from the headphones;
  • dirt or, more often than not, moisture has got into the phone case. It could oxidize the input pins for the headset, which also prevents the signal from passing to the processor;
  • the smartphone or headphones were dropped, as a result of which the loop responsible for transmitting signals was damaged.

iPhone 7 Plus also suffers from headphone problems

Important! It is a careless attitude to equipment and accessories that causes most of the breakdowns that may not be related to headphones. Do not expose the phone to direct sunlight, leave it in damp rooms, or drop it on a hard surface.

The first thing to do is restart your iPhone or iPad. If that doesn’t work, you can reset all custom settings and updates. Perhaps the problem lies in the software part in which the failure occurred. After restoring the phone, it is advisable to return the backup copies of the updates that were prepared before resetting the settings.

It often happens that some program simply does not allow the phone to turn on the vibration option. You need to remember which updates or software products were recently installed on the device, and uninstall them manually, and then check for the connection and sound.

If water gets into the phone, the contacts may oxidize and the operation of many modules will be impaired. Needed as soon as possible:

  • Unscrew the outer screws of the iPhone case and detach the back cover.
  • Using a suction cup or a sharpened credit card, carefully remove the display and remove its ribbon.
  • Dry the device with a hairdryer and remove oxidation with alcohol, if they appear.
  • Assemble the phone in the same sequence.

If after all this music does not appear and the headphones are not detected, the problem is in the connector. It is recommended to carefully clean it with a needle and cotton swab, which will remove dirt and dust lumps that have accumulated there due to wearing in a trouser

The headset may not turn on due to a defective adapter

How to Recall Bluetooth Device on iPhone

It so happens that when using Bluetooth headsets, they accidentally click on the “Forget device” item in the connection settings. After that, the phone no longer finds accessories and cannot work with them. The following sequence of actions can help:

  • Turn off Bluetooth.
  • Restart iPhone.
  • Turn on Bluetooth.
  • Search all devices.
  • Find what you want and start pairing.

Sometimes this does not help, and then it is recommended to reset the phone and accessories. This is a rather radical method, and sometimes you can do without it. It is enough to try one more step-by-step instruction:

  • Turn off the headset.
  • Press and hold the “On / Off” and “Synchronization / End” buttons on it simultaneously for ten seconds or until the indicators start blinking alternately.
  • Start searching for a headset from your phone (blinking mode. ready to search).

Failure to pair Bluetooth on iPhone is a fairly common error when connecting a headset

Thus, it was sorted out how to turn on wired and wireless headphones on the iPhone 7 and other versions of the popular smartphone. It should be noted that in most cases, the inoperability of components and accessories is associated with the user’s negligence. Therefore, you should carefully use your gadget, and then everything will work properly.

The smartphone does not see wired headphones:

From time to time, all smartphones, both the well-known standard of stability of Samsung and relatively young brands from China: Xiaomi, Meizu, Honor, Huawei, sin with sound problems in headphones. Any Android phone has almost equal risks of a problem.

It is impossible to say in absentia why the headphones do not connect to the phone. specifics are possible only after a complete diagnosis of the device. To make it easier to navigate the possible causes of the problem and how to fix it, we divided them into two large groups.

Bluetooth headphones won’t connect to the phone:

Increasingly, together with smartphones Samsung, Huawei, Horor, they purchase wireless headphones that work via Bluetooth. Of course, they are much more convenient to use and help to avoid the constant tangling of wires. In the case of them, completely different problems come to the fore.

Why can’t the phone see the headphones: Bluetooth / Wired? Solution to the problem

Many people face the problem when the phone does not see the headphones. simply refuses to recognize them. There is a similar nuisance in which the smartphone detects the headphones, but the sound still does not come in. There can be a lot of reasons for this phenomenon: from a malfunctioning application to a hardware failure of the phone. In the first case, it is much easier to fix the problem. In the second, most likely, you will have to contact a gadget repair specialist.

Causes

Most likely, the phone does not connect to the headphones for one of the reasons:

  • The charge on the headphones is too low;
  • The headset is disconnected;
  • The phone is not paired with the headphones;
  • Bluetooth is turned off on the smartphone;
  • The Bluetooth version on the gadget is incompatible with the version on the headset;
  • Out of range of wireless communication;
  • Headphones are broken.

Hardware failure

Usually, such problems are difficult to fix manually, since the matter is in the physical condition of the phone or components. Quite often, the phone refuses to connect to the headphones due to the careless use of the smartphone. Drops, moisture, frequent use of the gadget with dirty hands. all of this falls under negligence. The only case when it is possible to quickly and easily restore the port’s working capacity. it was polluted. A regular cotton swab, needle or match removes accumulated debris well.

Other reasons why headphones don’t work on your phone:

  • There is no contact in the 3.5mm port. Dirt, dust, debris, shards of wood, glass, etc. can interfere with contact. It is worst if the problem is caused by water, because this can lead to malfunction of other components of the smartphone. It can also cause banal damage to the nest. Cleaning, restoring contacts, or replacing the port should help;
  • An audio codec has flown off. this is a small microcircuit that converts an analog signal to a digital signal, and also does the same in the opposite direction. You can check the problem of the microcircuit by the fact that not only the headphones stop working, but also: speakers, microphone, communication. If the problem appeared after the crash, most likely the problem is in the audio codec;
  • Broken headset. Often the contact of the wire near the plug disappears. Interruption, strong bending, pressure on the cable can lead to breakage. You will have to change the cord or buy new headphones, at least this is better than repairing the phone.

Solution to the problem

It is enough to eliminate the root causes for which the headphones on the phone do not work and everything will start to function properly:

  • We charge the headphones. Most likely their charge level dropped. Maybe they were used for only 1 hour, but the battery still sat down. The battery has wear and tear, and Chinese accessories often do not meet the declared characteristics;
  • We turn on the headset. There may be a button on the headphones to turn it on and off. Click on it once and enjoy the music;
  • We activate pairing mode. To do this, turn on Bluetooth on your smartphone, find a wireless device and start the connection process. On the headphones themselves, turn on the pairing mode. They will start working very soon;
  • Turn on Bluetooth. The required shortcut is in the shutter called by swiping from top to bottom at the top of the phone. One click turns on Bluetooth;
  • Checking the compatibility of the headphones. In general, all versions of Bluetooth are backward compatible, but there are also incidents in which headphones cannot be connected due to the difference in wireless technology versions. We check the headset on another phone with an excellent Bluetooth version, if everything works, then the problem is here. However, the problem is rare, you shouldn’t bet on it;
  • Reducing the distance to the device. The headphones are ready to work stably within a certain radius from the phone. If you go beyond it, the connection becomes intermittent or completely disappears. As the charge level decreases, the stable operating range may be reduced. If everything works properly at close range, we try not to go far from the phone;
  • We repair or change headphones. this is an extreme case when there is a malfunction in the hardware. Usually it is useless to repair them, since the repair price is the same or even more expensive than new headphones.

Software malfunctions

Also, headphones are often not connected to the phone due to a software glitch. Application conflicts, system errors, firmware bugs, applications not working. all this can lead to a problem with sound. Mostly the problem is fixed on its own after replacing the application, resetting the settings or flashing the gadget.

What to do if the phone does not see the headphones due to the software part:

  • We remove temporary files, viruses and change the audio player. Initially, it is worth running CCleaner, which will delete the cache and temporary data of applications. Then we can use the free Avast antivirus to clean the system from viruses. Finally, install another media player on Android from Google Play;
  • We reset the gadget’s settings, this leads to the complete deletion of all user data (except for those in the memory of the flash drive). The smartphone acquires the same state as when it was first turned on. You need to go to Recovery mode (hold down the volume up and lock button with the phone turned off). Here you need to select the item Hard Reset;
  • Reflashing Android. This is the last fix possible from this perspective, which we will not describe in detail here.
HSIDG.COM 2021