IPhone 10 freezes what to do

Table of Contents

iPhone frozen and won’t restart

And get the best deals from trusted masters.

  • Compare and choose the best conditions
  • Feedback from interested professionals only
  • Don’t waste time communicating with intermediaries

The situation when the iPhone freezes and does not restart is familiar to many smartphone owners. Software errors occur when applications do not work correctly and conflicts between programs. As a result, the phone starts to hang spontaneously, glitch, the power-on function disappears, it turns out to be inoperative.

Usually, when the device freezes, the iOS versions do not turn off or restart. Most often, older iPhone models (4,5) hang. Modern iPhones of the sixth and seventh models start to fail much less often.

Reasons for spontaneous shutdown of the device

If the iPhone freezes and won’t restart, it was due to some reason. Most often, problems with Apple equipment arise due to the following reasons:

  • due to mechanical damage
  • software errors, configuration failures
  • contact with liquids
  • factory marriage

Under the influence of such negative factors, the iPhone may not turn on, hang, glitch, it may not have the function to turn off the device, the Device, Home, Power buttons may not work. In this case, you need to carry out a hard reboot in order to turn off the phone.

Self-service recovery methods for iOS devices

As a rule, if the iPhone starts to freeze and glitch, the owners try to restart the smartphone. But the standard reboot method (pressing the Lock / Power button) does not always give results. IPhone does not perform functions or commands when frozen, no matter how long the button is held down.

In this case, you need to apply a hard reboot. This reboot method allows you to turn on your device even if your phone is experiencing system errors. To get the phone out of the frozen state, you need to press the Home button and the Power button at the same time. Hold the buttons until the Apple logo appears on the iPhone screen. A hard restart puts the smartphone into recovery mode and it should automatically turn on.

There is another way to hard reboot. In order to restart the iPhone and put it into normal operation, you must simultaneously press the Lock button and the Shutdown button. Wait for the iPhone to turn off. After turning off, you should pause for a few minutes and press the Power button. By pressing this button, you will see the Apple logo, which will indicate that the hard reset worked and your phone started up normally.

It should be noted that the Home button and the Power button in the iOS version are responsible for more than just starting recovery mode. With their help, you can take a screenshot of the screen. But you need to hold down the Home key and the shutdown button for no longer than 1 second, otherwise the iPhone will restart. If, after pressing the button, the smartphone does not start to respond and turn on, you need to contact a specialist.

Malfunction symptoms

There are several ways to restart your iPhone, depending on how disrupted normal operation is. Signs of a freezing device with an apple logo include:

  • iPhone does not come to working condition for more than 1 minute
  • I can’t turn on the device
  • pressing the (Device, Home, Power) button gives no results
  • the device cannot be turned off

As practice shows, most software errors can be eliminated on their own, only some of them require professional intervention.

Benefits of qualified assistance

If you have tried all the restart methods (pressing the Power button and the Home key) and the iPhone has failed to turn on, contact a professional. Experienced specialists will fix software errors on smartphones of the iOS version, correct settings and return a fully working iPhone to you.

For a quick and high-quality iPhone repair, contact Yuda specialists who have extensive experience and the necessary equipment for repair.

Yudu performers will help you restore your phone to working condition when:

  • boot mode does not start
  • the button does not want to turn on
  • charging does not respond
  • I can’t turn on the Power, Home keys
  • apple logo not visible

If the iPhone freezes and does not restart, order the services of experienced craftsmen registered with Yuda, and they will perform phone restoration in a short time.

iPhone freezes unexpectedly. what to do with it? Reboot!

Hello everyone! But the truth is, what to do with a frozen iPhone? For example, you can throw it out. And from my own experience, I can say that some owners of old devices would like to do just that. After all, this situation is really wildly annoying. the iPhone screen is on, but does not respond to touches, button presses, the phone cannot even be turned off! All that remains is to look at him and think about how good Apple is after all (sarcasm).

How to Force Turn Off/Reboot iPhone X! (Frozen Screen Fix)

Okay, let’s not scold Tim Cook and his guys. let’s get back to our problem. Which, we must admit, is not very pleasant. However, there is no need to rush to throw out the device (this is not our method!), Because freezes (in most cases) can be fixed in just 1 minute. Yes, yes, yes, it really is a question of 60 seconds. Don’t believe me? Now see for yourself

Since freezes are most often caused by software glitches, in order to get rid of them, just one action is enough. restarting the iPhone.

But how to turn on or turn off the device if nothing happens when you press the “Power” button and the screen? When the iPhone is hanging, you need to do this:

  • If you have an iPhone 8 (Plus), iPhone X, iPhone XS (Max), iPhone XR, iPhone 11, iPhone 11 Pro (Max), iPhone SE 2 (2020), iPhone 12, iPhone 12 mini, iPhone 12 Pro (Max ), then you need to perform a fairly tricky combination. Are you ready? Begin! Press “Volume up” (immediately release), “Volume down” (immediately release), press and hold (10-15 seconds) the “Power on” button. Yes, at first it seems difficult, but in fact, everything is very simple. press and release, press and release, press and hold until the “apple” appears.
    iphone, freezes
  • Are you lucky enough to own an iPhone 7, iPhone 7 Plus? It is necessary to simultaneously hold down and hold two buttons (“on” and “volume down”) until the smartphone restarts (10-20 seconds).
  • For all other “junior” iPhone models. simultaneously hold down and hold two buttons (“power” and “home”) until the restart takes place.

What are these combinations? Nothing supernatural. this is a normal hard reboot of the device (more details here).

That’s it, the problem is solved. And very little time was spent 🙂 Although

It is possible that one of the buttons we need is broken. This means that you cannot get the iPhone out of the frozen state by forced shutdown. What to do in this case? You have two ways:

  • Wait until the gadget runs out of battery.
  • If you need it faster, you will have to disassemble the device and disconnect the battery for a few seconds.

As you can see, there is nothing complicated here either. The only moment is that it is better to engage in assembly-disassembly if you have a certain experience, or entrust this operation to the masters of the service center.

Finally, a few of the most common questions and answers regarding iPhone freezes:

Absolutely. There is nothing wrong with such things. Despite the fact that iOS is a fairly stable operating system, nothing “software” is alien to it. there is no escape from failures.

And now, the iPhone will always hang like that?

likely no than yes. As a rule, these are isolated cases and they rarely recur.

I have a jailbreak and my iPhone constantly freezes, what to do?

Jailbreak is not an official tampering with the device’s software. Delete it and everything will be “OK”.

Crashes always happen only with a certain game or application. after opening them, the display and buttons stop responding to pressing. How to be?

Do not use this program. Wait until the developers are “able to program” and release a stable update that will not “break” the iPhone.

  • Most often iPhone freezes due to software glitches in iOS.
  • This problem is very easy to fix. do a hard reboot and everything is “OK”.
  • No need to worry too much about this.

IPhone is frozen

And get the best deals from trusted masters.

  • Compare and choose the best conditions
  • Feedback from interested professionals only
  • Don’t waste time communicating with intermediaries

Apple products are one of the most reliable and high-quality in the world, but sometimes its owners may face the fact that the iPhone or iPad freezes. If the sensor lags, it could be caused by a low battery level or a software glitch. Bringing the touchscreen back to life is most often done through the usual reboot method. To avoid similar problems with the iPhone in the future, you need to understand the reasons for the freezing of the smartphone.

Why iPhone won’t respond to commands

If the iPhone is frozen, then the first reason you should pay attention to. a large number of applications used. Especially if some of them are constantly running in the background. When running programs that require a lot of space on iOS (for example, geolocation, and various games), the following may happen:

  • the touchscreen will respond slowly when pressed, preventing you from answering an incoming call, dialing a number, sending a message, or unlocking the screen altogether
  • iPhone will simply turn off due to high battery drain

iPhone may start to glitch even after updating programs over the Internet. Especially if the “Auto update” function is active.

How to restart a device without using the power button

There are situations when you need to turn off or restart without using the shutdown buttons (especially important if they do not work at all). To do this, you need to “pull” the “Assistive Touch” function to the desktop. You can do it like this:

  • go to the menu item “Settings”
  • select “Accessibility”
  • activate “Assistive Touch” by moving the slider to the “On” position

This function on the iPhone makes it possible to lock the screen, turn off and adjust the sound, return to the home page, avoiding pressing the Home button, and most importantly, it allows you to turn off the device if the shutdown button does not work.

What to do if your smartphone’s touchscreen display becomes glitchy

If the phone starts to glitch or freeze for the first time, first try to wait for the response of the corresponding application. The processor will close unresponsive applications by itself and return to normal operation. If there is no response, try restarting your device. To do this, follow these steps:

  • press the “Home” button and the “Power” button at the same time
  • hold them for at least 5 seconds
READ  iPhone 7 fell into the water what to do

After that, the screen will turn off, and then the phone will turn on automatically. If this does not happen, then click on the lock button and the iPhone will work.

Another way to lock / unlock the screen on the iPhone, or simply turn on the device if the shutdown button does not respond to commands, is to charge the smartphone. It is possible that the phone will start to respond to the power button after reaching 100 percent battery charge, as it stuck due to a large number of running applications that require a lot of power.

If the sensor lags, but at the same time the screen works slowly and gives at least some kind of reaction, then you can do without an emergency reboot method. To do this, just try to turn off your iPhone normally:

  • press the Power button
  • wait until “Slide To Power Off” appears on the phone screen
  • slide the slider to the desired position

Next, turn on the device by pressing the lock button. If Athos freezes and slows down due to a large number of open programs, then the methods of rebooting and shutting down will help him restore performance.

If the phone freezes or slows down after the update, then reset the settings, but first save all the data on the device. There are two ways to fix your smartphone if it starts to glitch:

  • “Reset all settings”. a gentle method, since it saves all user data, in order to perform a “Reset all settings”, you need to go to “Settings”, then click the “General” button and then. Reset button
  • “Erase content and settings”. a radical method that erases all data from the device, you can also activate this function in the “Settings” section (“General”. “Reset”) by pressing the “Erase iPhone” button

If the iPhone crashes were related to the update, then after resetting the settings, you will be able to dial the number normally, answer incoming calls and messages again.

If the smartphone regularly slows down and freezes, or the screen turns off by itself, then most likely a firmware update is required. Only professionals will help to solve this problem.

Professional help

If, after all the manipulations performed, the phone continues to slow down, periodically freezes, does not respond to locking and unlocking, seek professional help. Experts will diagnose the device, determine the reason why the smartphone does not ring and does not respond to the shutdown button. After determining the malfunction, the following work will be performed:

  • firmware update
  • replacement of loops on the lock key

Resolve freeze in recovery mode with Tenorshare ReiBoot (Free and one click)

First download and host Tenorshare ReiBoot on your computer. Connect iPhone / iPad / iPod touch to your computer using USB cables. Then Tenorshare ReiBoot will recognize your device in recovery mode, click the “Exit Recovery Mode” button. Wait a bit and the device will reboot safely. In this process, do not disconnect the device.

Of course, Tenorshare ReiBoot can quickly and easily solve your freeze problems and wake up your iPhone from recovery mode. If your iPhone is still stuck in recovery mode or after a while the system got on the screen, did not respond, maybe due to a damaged file system, then fix the operating system to restore it completely without losing data.

Other Ways to Get iPhone Out of “Recovery Mode” (Difficult and Data Loss)

A way to exit Recovery Mode. Forcibly restart by holding down the Home button, Power, and holding these buttons for 10-15 seconds. After that, your device restarts.

If this does not work, there is also a second way to get rid of the black screen with the cable and iTunes image. restore to iTunes, But it will erase all the contents, so create a backup before using it.

  • Download and install iTunes on your computer.
  • Open iTunes, connect device to PC with USB cable.
  • Wait for the image of the iPhone with the cable connected to appear on the screen.
  • Press the “Restore” button in the aytyuns. the device will start working again as usual.

Stuck in recovery mode after iOS 10/11/12 update for iPhone, how to?

We are sure that many have encountered a freeze in the recovery mode after updating iOS 12/11 / 10.3 / 10.2.1 / 10.2 / 10.1 / 10/9, especially users of the iPhone X / 8/7/7 Plus, SE, 6s / 6s Plus / 6/6 Plus, 5s / 5c / 5, 4S, iPad or iPod touch. When you see the USB cable and the iTunes icon on the screen of your iPhone, it means that the iPhone is in recovery mode. Today I will tell you how to get iPhone out of recovery mode, how to solve iPhone stuck in recovery mode.

What is Recovery Mode?

Recovery Mode, open mode when the device is turned off and the USB connection is active. It is through this mode that the flashing and “Update” take place. If you connect the iDevice in this mode to iTunes, then you will see a message that the program has detected “The device is in recovery mode”. The USB cable and iTunes icon will be displayed on the screen.

Reasons Why iPhone Stuck in Recovery Mode

iPhone freezes in recovery mode, there are several phenomena. May be:

  • hardware and software failure
  • after / during jailbreak
  • after / during iOS 12/11 / 10.3 / 10.2.1 / 10.2 / 10.1 / 10 update
  • file system corruption

With Tenoeshare Tenorshare ReiBoot, you can quickly and easily fix problems, including stuck on apple logo / black screen / during startup / blue screen of death, delay in DFU / recovery mode / Home button, errors (iTunes was wrong in sync / update / restore iOS device) to iPhone / iPad / iPod, without data loss or damage. Welcome to use our products.

How to restore operability to a personal computer with the operating system “Windows” in the absence of response to user actions

There are several effective ways to restore a frozen, unresponsive to user instructions and commands, a personal computer, which differ depending on the cause of the problem. Sometimes, to resume the full functioning of the device, users just need to wait just a few seconds. the computer may freeze when performing a separate operation, and after the specified time, it will independently return to the mode of correct execution of tasks.

Otherwise, users may need to seek help from a specific key combination. For example, if a full-screen application, such as a certain game, stops responding to commands and does not allow the user to make standard exit, then press Alt F4 together. This combination will allow you to close the problematic application if the problem with the graphics was the source of the situation. However, if the application completely fails to perform the corresponding actions or static freezes, this method will not work.

To determine the extent to which the computer has stopped and to test its ability to respond to basic system commands, press the “Ctrl Alt Delete” key combination together. If the conflict with operability is local in nature, expressed in the failure of one or more applications, the system menu screen will appear, allowing you to launch the Task Manager application (to fix performance errors of running programs), log out or restart the computer. If the screen is not displayed, then users will not be able to fully correct the situation and restore the functioning of the computer without a forced restart.

If users managed to open the Task Manager application, then it will be much easier to fix the unresponsive stopping of individual computer applications (to directly launch the Task Manager application without going to the additional menu, you can also use the Ctrl Shift Esc keyboard shortcut).

In the window of the running application, go to the “Processes” tab. If the application is presented in a minimalistic form and contains only a list of running processes, then click on the “Details” button to display an expanded list of system application capabilities.

In the CPU column, find all processes that are using a lot of processor resources. To sort the data by percentage CPU usage, left-click on the CPU column heading, and the application will sort the data in descending order, presenting the most time-consuming and demanding process at the top of the list.

Select the required process by clicking on it with the left mouse button, and then click on the “End task” button to force the program to close. Unfortunately, all unsaved data in such an application will be lost, but the general performance of the computer will be restored.

Sometimes, in the Windows operating system, the computer desktop, including the taskbar and the main user start menu, may stop responding to any user actions and freeze in a static position. Often, to fix the problem, you just need to restart Windows File Explorer to fix an accidental problem. Therefore, in the “Task Manager” application window in the “Processes” tab in the list of displayed options in the “Name” column, find the “Explorer” line, left-click it to select it, and then click on the “Restart” button.

If users do not have important unsaved data in previously opened applications, then on the system menu screen, which is activated by using the “Ctrl Alt Delete” key combination, press the power button in the lower right corner of the screen, and in the pop-up auxiliary context menu select the section ” Reboot “. The system will forcibly close all applications and running processes, including tasks whose correct execution has been violated, and will restart the computer’s operating system, eliminating any malfunctions that have arisen.

How to fix a freezing iPhone X XS XsMax 3 solutions

Users can also use the Windows L keyboard shortcut to temporarily lock out the use of Windows and go to the login screen, where they can also quickly restart the computer. However, if the “Ctrl Alt Delete” key combination does not allow users to activate the system power management menu of the computer, then this method will probably not work either.

If none of the previous troubleshooting methods worked, press the Windows Ctrl Shift B keyboard shortcut. This is a hidden hotkey combination that restarts the graphics drivers of the personal computer. If errors in the correct functioning of the drivers were the source of the problem, this will help restore the system to work.

In the case when users have consistently tried all the options, but the personal computer does not respond to commands, the picture is static and any user actions remain unanswered, then the situation forces them to use a radical method and completely disable the device.

Locate the power button on your personal computer, and then press and hold it down for ten seconds. Regardless of the state, the computer will forcibly shut down. Wait a few seconds and then boot it up again by pressing the power button normally.

This is not the cleanest and safest way to shut down your computer. Users should use the shutdown methods available in the operating system to avoid unexpected hardware damage and loss of data integrity, but if the personal computer is unresponsive, there is no other way to remedy the situation.

If your computer displays a blue screen (“BSOD”), indicating a low-level software failure, hardware malfunction, or a critical error affecting the operation of the system that the responsible Windows services could not fix, then a forced shutdown of the computer is the only one way to correct the situation. By default, a Windows-based personal computer automatically reboots when any unrecoverable situation occurs that causes a blue screen to be activated. But if the system does not reboot on its own, then the corresponding function is probably disabled. Record the error message that pops up on the computer screen so that you can find a suitable solution later, then force shutdown or restart by pressing and holding the power button.

A single case of a computer not responding to instructions and commands from the system may be an accident, but multiple delays in the execution of the corresponding instructions suggest that there are problems that users must solve. And then we will consider the simple available ways of how to restore the functioning of the computer, restore its operability and eliminate the occurrence of further delays in the timely response of the device.

How to prevent possible freezing of a personal computer in the future

The tips above can help get your computer back to working order and restore it to full functionality after an unexpected crash, freeze and lack of response to any user commands. If the problem you are experiencing is an isolated incident, then you shouldn’t worry about it. The operation of computers is influenced by many different factors, including a set of multi-tier applications of the operating system and third-party software, hardware control platforms, and sometimes, a random combination of circumstances can cause temporary malfunctions with a timely response of the device.

READ  How to make faces on iPhone

But if problems with the performance of the computer occur regularly, then, with a high degree of probability, it can be argued that there are serious computer malfunctions at the hardware or software level. Using pre-installed system tools (for example, System Stability Monitor located in the system Control Panel application) or third-party applications, you can determine the right direction when looking for a possible solution.

If freezing problems started recently, after the last update of the computer operating system or additional installation of new software, then perhaps this change affects the overall performance, and it is worth using the System Restore tool. It resets the settings and applied software installations of the personal computer to a known good state. To go to the tool you are looking for in the Windows 10 operating system, use the following sequence of steps.

Open the system application “Control Panel” in any suitable or most convenient way. For example, click on the “Start” button located on the “Taskbar” in the lower left corner of the desktop, and open the main user menu “Windows”. In the displayed list of applications and utilities available in the system, find and left-click the “Utilities. Windows” section. Then, in the pop-up submenu, select the “Control Panel” section from the options presented.

In the application window that opens, using the control wheel of the manual manipulator (computer mouse) or the scroll bar slider, find and select the “System” section.

On the next page of the window, click in the left side control menu on the text link “Additional system parameters”.

In the new pop-up properties window, go to the System Protection tab. And then in the “System Restore” section, which is responsible for correcting unwanted system changes and returning the state of the personal computer to the previous correct restore point, click on the “Restore” button

The tool will automatically perform the necessary actions and restore the previous version of the system.

Additionally, users need to make sure that the problems with the functioning of the personal computer are not caused by the presence of malicious software. Therefore, we strongly recommend running a system scan aimed at finding and neutralizing malicious virus programs. In the Windows 10 operating system, you can use the built-in Windows Defender antivirus and, with its help, find malicious applications. Or, users can try third-party system security tools, opting for vendor-specific security solutions based on personal preference.

If you decide to use the built-in Windows Defender protection tool, navigate to Windows Security using any appropriate method. For example, click on the “Taskbar” in the lower right corner of the desktop on the button to open the menu of hidden icons, represented as a schematic arrow. And then, in the pop-up panel, click on the “Windows Security” button, made in the form of a shield, and the desired application will be launched instantly.

In the opened window for managing security tools of the built-in security solution of the Windows operating system, click on the tab “Protection against viruses and threats”.

Now, on the responsible page, click on the “Quick check” button and start the search process for malicious software.

Windows Defender Antivirus will scan your system and eliminate malicious applications by placing them in Secure Storage, thereby eliminating a potential cause of your computer freezing.

Hardware problems are much more difficult to pinpoint. The computer contains many elements that can deteriorate and cause the system to freeze, for example, the components of a personal computer can overheat, the memory sticks become unusable, etc. If the computer regularly freezes while the user is playing computer games, this could indicate a problem with the graphics processing unit (“GPU”) or, as mentioned earlier, be the result of overheating. The hard drive, power supply, and many other components of the personal computer can also be faulty and cause problems with the correct response of the device.

Therefore, make sure your computer is dust-free, the cooling system is working properly, and then check its RAM. It is difficult to diagnose hardware problems. And often, to accurately find and determine the defective item, it is required to replace one component of the computer with another, and check whether the replacement will fix the existing problem. If the personal computer is still under warranty, then the best solution would be to contact the manufacturer or to the service department recommended by him for qualified correction of the malfunction.

To eliminate the risk of software errors, it is recommended that you reinstall the Windows operating system. In the Windows 10 version of the software management platform, users can use the Reset PC feature to restore the computer to a near-original new state in the event of an unstable device. However, it should be borne in mind that as a result of using this function, all installed programs will be removed. But users will be able to keep all personal files before they decide to reinstall Windows 10.

To return the computer to its original initial state, you must use the capabilities of the system application “Settings”. You can open an application in many different ways, for example, the fastest possible way, expressed in the use of the combined keyboard shortcut “Windows I”, immediately launching the desired application. Using the scroll bar or mouse wheel, go to the end of the list of available system options and select the Update & Security section.

In the left pane of the new window, select the “Recovery” section, and in the right pane in the “Reset the computer to its original state” section, click on the “Start” button to start the recovery process, and follow the step-by-step system instructions.

Additionally, in this section, users will have the opportunity to remove the last major official update of the Windows operating system and return to the previous stable version if no more than ten days have passed since installation (after the specified period, this option disappears).

Also, if your personal computer freezes during the reset process, try starting the operating system from an external Windows 10 installation media (for example, a USB drive or DVD). Insert the disc into your computer, change the boot options, and then reinstall the operating system. If your computer freezes while installing “Windows” (or later), you will know that you almost certainly have hardware problems that you need to fix yourself or in a specialized workshop.

Windows 10 computer is frozen, what to do?

Read how to get your Windows 10 computer back on track if it’s not responding to user input. How to prevent your computer from freezing.

Personal computer devices, especially their brightest and most common representatives (stationary computers and laptops), are used by users everywhere and are involved in many different areas of activity. For the successful execution of a huge number of highly demanded high-cost tasks and time-consuming processes, computers use advanced software control platforms, and the most popular operating system from similar samples from different manufacturers is the Windows operating system. Delivered to date by the latest version of Windows 10, the operating system brings together the best examples of tools from previous versions of Windows and is complemented by new and unique services. The innovative model of the operating system allows you to install and fully use it on a wide variety of computer devices of various configuration options and additionally use various third-party applications.

However, a computing complex that combines a personal computer and an operating system does not always work flawlessly. Individual problems may occur due to various reasons that can lead to the operating system freezing, freezing in a static position of the picture on the screen and the system’s lack of response to any user actions and commands. Using the methods presented in this article, users can restore their computer to work, as well as take additional steps to prevent the development of such a situation in the future.

Hard reset iPhone X

If your iPhone X is frozen, then you most likely will not be able to restart it by turning it off and on. For such cases, the iPhone has a forced restart. On the iPhone X, this is done as follows:

  • Press and quickly release the volume up button.
  • Press and quickly release the volume down button.
  • Press and hold the power button until the Apple logo appears.

It should be noted that this method of forced reboot is relevant only for the iPhone X, since in other iPhone models it is done differently. You can read more about this in our article on restarting your iPhone.

How to restart iPhone X

The new iPhone X, sometimes mistakenly referred to as the iPhone 10, has brought a lot of changes over previous models. In particular, in the iPhone X the Home button has disappeared and the screen configuration has changed. These solutions saved a large amount of space for placing a screen with a larger diagonal, but on the other hand, this led to significant changes in the principles of smartphone management.

For example, the abandonment of the Home button led to the need to look for other buttons for the functions that used it. So, the voice assistant Siri is now launched not using the Home button, but using the power button. And there are a lot of similar changes in the iPhone X, which creates a lot of inconvenience to users.

One of the problems is rebooting the smartphone. Many users do not understand how to reboot iPhone X, because the old reboot methods simply do not work in this smartphone model.

Restart iPhone X normally

If you need to restart your iPhone X, the best way to do this is to turn off and then turn on the device. In this case, the reboot is performed as naturally as possible and will definitely not create any additional problems. Of course, if the smartphone is completely frozen, then this method will not work and you need to use a forced reboot, but this does not happen so often.

So, to restart the iPhone X, you need to simultaneously press the power button (right) and the volume down button (left). After that, these buttons must be held down until you are prompted to turn off the iPhone.

Next, you need to turn off the iPhone X by moving the power button to the right.

After turning off, you need to wait a few seconds and turn on the smartphone again using the power button, which is located on the right side of the device. This will reboot your iPhone X as safely as possible.

Most likely, this method will work on the new iPhone XR and iPhone XS models.

Alternative Ways to Restart iPhone X

In addition, there are some alternative ways to restart iPhone X. You can use them if the options described above for some reason do not suit you.

For example, you can turn off your iPhone X through settings. To do this, simply open the “Settings” application and scroll down the list of options to the very end. There you will see a “Power off” button that can be used to turn off the device.

You can also turn off iPhone 10 using AssistiveTouch. To do this, go to the settings, open the section “General. Accessibility” and turn on the “AssistiveTouch” function.

After that, a floating button will appear on the screen of your iPhone X, which can be used to perform some operations. In order to turn off the device, you need to click on this button and select the “Apparatus” section.

Then you need to press the “Screen lock” button and hold it down until the shutdown button appears on the screen.

You can also start a reboot by changing some settings. For example, if you go to the “General. Accessibility” section of the settings and enable the “Bold font” function there, a warning about the device restart will appear on the screen. Click “OK” and the iPhone has rebooted.

Another option is to reset your network settings. If you go to “General. Reset” and use the “Reset network settings” option and activate the “Reset network settings” function, the iPhone will restart automatically.

As a last resort, you can reboot iPhone X by draining its battery to zero and charging it. After a little charge it will turn on automatically.

What to do if iPhone 11 freezes?

If the gadget is not responding or you just want to quickly restart your smartphone: press and quickly release the volume up button, press and quickly release the volume down button, then hold down the side button and do not release until the iPhone restarts.

READ  How to create emoji on iPhone 7

What to do if an apple is on when you turn on the iPhone?

How to Hard Reset iPhone without Button

  • Press the volume up button and release it.
  • Also press the volume down key.
  • Hold the power button and hold it until the screen goes out (the Apple logo disappears) and the device starts to reboot.

How to restart iPhone 10 if the screen is unresponsive?

  • Hold and quickly release the volume up button.
  • Hold and quickly release the volume down button again.
  • Hold down the on / off button (Power key). Hold it until the iPhone screen darkens.

How to restart iPhone x if frozen?

How to Reboot iPhone X in Force Mode

  • Quickly press and release the volume up key;
  • Quickly press and release the volume down key;
  • Press and hold the side button until the smartphone turns off.

What to do if iPhone 10 freezes and won’t turn off?

  • Press and hold the volume up or down and the side button until the Power off slider appears.
  • Move the slider and then wait 30 seconds for the device to turn off.

What to do if iPhone is frozen

Freezing is a problem that any computer technician faces. At some point, one of the programs begins to behave incorrectly or conflicts with another program, and as a result, the entire device is inoperative. This situation is called freezing.

iPhone is also prone to this issue and may freeze from time to time. Usually, when the iPhone freezes, it refuses to turn off or restart, which confuses the user. Most often old models freeze, such as iPhone 4, 4s, 5, 5s and 6. But sometimes even iPhone 6s and 7 users face freezes.

If you find yourself in such a situation, then this material should help you, here you will learn what to do if your iPhone is frozen.

iPhone frozen and won’t turn off or restart

Usually, if the iPhone freezes, users try to turn it off or restart using the standard procedure, namely by long pressing the Power / Lock button. Unfortunately, in most cases, when the iPhone freezes, this shutdown method does not work. iPhone keeps running and running frozen applications no matter how long the user presses the power button.

But, the iPhone has an alternative shutdown method that bypasses the iOS operating system. Due to this, this shutdown method works even on tightly frozen devices. The method consists in simultaneously pressing the Home button and the Power / Lock button.

The Home and Power buttons must be pressed simultaneously and held until the frozen iPhone turns off. After turning off, you need to wait a few seconds and make a short single press on the power button. After that, the iPhone will turn on and start working normally.

It should be noted that the key combination “Home Power” is also responsible for taking a screenshot. But, to get a screenshot on these keys, you need to press literally for 1 second, if you hold the keys longer, then the anti-freeze protection will work and the iPhone will reboot.

If you have an iPhone X or newer, then you need to use the new reboot method.

iPhone freezes when turned on

Pressing the Power On Home buttons at the same time allows you to turn the device off and on in any situation. However, this procedure does not guarantee that the iPhone will not freeze again during the startup process.

If your iPhone freezes before the device is fully loaded, then you can use the recovery mode called “Recovery Mode”. With it, you can restore your iPhone to its original state and bring it back to life. But, it should be borne in mind that this procedure is equivalent to a factory reset and leads to the deletion of all user data.

In order to enter Recovery Mode on iPhone and perform recovery, you need to do the following:

  • Turn off your iPhone and wait a couple of minutes for all programs to finish their work. If the iPhone does not turn off in the standard way, then you can resort to the combination “Turn on Home” described above.
  • Then you need to press the “Home” button and without releasing it, connect the iPhone to the computer via the Lightning cable.
  • Once connected, keep holding the Home button until the iTunes logo and cable image appears on the iPhone.
  • Now you need to release the Home button and start iTunes on your computer.
  • In the iTunes program, you need to go to the iPhone settings and click on the “Restore iPhone” button.

Thus, you can solve the problem with the iPhone freezing during startup, but, as already mentioned, for this you will need to donate all user files. You can read more about Recovery Mode in our article on resetting iPad to factory settings.

Also on Apple devices there is a so-called DFU mode or Device Firmware Update. If recovery mode does not help, then you can try to enter iPhone into DFU mode and try recovery again.

Not the phone is hanging, but only one application

The methods described above reveal what to do if the iPhone is frozen and does not give any signs for any commands. whether it be pressing the Home button or trying to lock the screen. In the event that only the application that you were using at the moment is frozen, the act should be even easier.

It is enough to double-click the home button to get into the directory of running applications. The one that is stuck and does not respond to commands must be closed and your device will return to normal operation.

How to prevent future freezes

In fact, preventing iPhone from freezing is not that difficult. Since the main reason for such freezes is either the “overload” of the device by programs that consume too many resources (namely, RAM), or the launch of applications that generate errors (though this depends solely on the developers).

It turns out that the iPhone does not freeze, you need to monitor how many applications are running in the background, and periodically close them when there is no longer any need for their functioning.

Nothing helps, the phone does not respond

If even the power connection of your iPhone did not help it get out of the freeze state, this means that the problem may be at the hardware level. To solve it, the phone needs to be carried to the service center for specialists to help you.

What to do if iPhone is frozen?

The device itself provides a standard way out of such situations. When the user does not know what to do if the iPhone is frozen, of course, the first way out, which does not provide for any interference with the phone, is to simply wait for the processor to return to normal operating mode on its own in a few minutes. It is possible that one or more applications will be closed for this.

If you need the device now, there is no time to wait, and the iPhone-4c is frozen, but you do not know what to do. then it is worth doing the following operation. It is necessary to simultaneously hold down the central button located under the screen (it is called Home. Return to the home page), as well as the power off key (on the top right panel). In general, this combination is intended for taking screenshots of the screen, however, if you keep it longer, then an automatic reboot occurs. This is what you need when the iPhone-5 is frozen (you don’t know what to do).

What to do if iPhone freezes? How to prevent future freezes?

Each smartphone works in such a way as to perform certain processes. Those, in turn, are created by applications and downloaded by the user in the event that he wants to go to his favorite game, for example. Sometimes it happens that there are too many of these processes, and the operating system becomes unable to process so much data. Simply put, the phone freezes and stops processing user commands.

Despite the fact that Apple’s equipment is considered reliable enough and such that it does not cause any inconvenience during use, there are times when the iPhone-5 freezes. What to do in such situations, and how to solve such a problem without harm to the device, we will tell you in this article.

How to speed up the system

If your iPhone freezes often enough, and you would like to speed up its performance in some way, we recommend that you take some actions with it. So, for example, if your device of older generations periodically freezes (models 3, 4 series and earlier). it’s probably all about the iOS firmware. The thing is that Apple regularly releases updates to its operating system, which consume more and more resources. This is done with the aim of making older models work worse, which would encourage users to buy new phones. You can solve the problem of slow operation of old devices by abandoning updates and rolling back the system to “your” version. the one that was originally installed on the device. It will work much better, you will see.

Order a repair at the “X-Repair” service center

If restarting your iPhone did not help you, contact our service center “X-Repair” at Arbatskaya or Bagrationovskaya for help. Wizards will diagnose the phone for free and repair it with high quality. You can also use the courier call service. Our employee will pick up the broken device right from home or office. You will receive the repaired equipment back as soon as possible.

How to Force Restart iPhone XS?

  • press the volume up key (1);
  • press the volume down key (2);
  • keep the power button pressed until the restart starts (3).

What to do if iPhone XS freezes

This article will give you an idea of ​​how to shut down and restart your iPhone XS. The instructions are also suitable for any phone with iOS 12th version. If you still cannot solve the problem, contact the X-Repair Center. Our technicians will be able to diagnose and fix any breakdown in your phone.

How to turn off iPhone

If the iPhone XS is your next phone after the mechanical Home button, the shutdown method will be unfamiliar. In this model, you need to hold down the power and volume keys until the confirmation window is displayed. Move the slider and the phone turns off.

Another way to turn off any iPhone is with the Power Off feature. Finding it is easy. Go to the menu “Settings”. “General”. “Turn off”.

If the iPhone does not respond to your actions, contact the X-Repair service center. Our masters will quickly and efficiently eliminate any malfunction.

Reboot with non-working mechanical keys

iPhone with broken buttons can be restarted using AssistiveTouch. The function also allows you to control the phone by gestures, without using mechanical keys, and flexibly customize the control for yourself.

To reboot your phone in this way, you need a computer and a USB cable. If you don’t have a cable, a computer, and buttons don’t work, you won’t be able to turn on your iPhone.!

To enable the function, you need to go to the “General”. “Accessibility”. “AssistiveTouch”. “On” To turn off the iPhone, you need to open the AssistiveTouch menu that appears, select “Device”. “Screen lock” (hold down, the “Turn off”, “Cancel” buttons should appear), confirm the shutdown. After that, connect your phone to your computer using a USB cable.

Restarting iPhone XS

First you need to turn off your phone in one of the usual ways. For example, select the “Disable” function in the menu. After a while, after the screen is completely turned off, you need to hold down the power button of the phone. The Apple icon will appear. and after a while the iPhone will boot up. Immediately after switching on, the phone may “slow down”. Therefore, it is better to wait a little before using it.

You may also be interested in:

Presented at Apple’s September presentation, two new flagship smartphones made a splash among the public with their

We all know firsthand about the legendary quality of both old and new iPhone models.

Apple’s iPhone X went on sale in September 2017, and in September 2018

iPhone X vs iPhone XS. we continue to understand the differences. In the previous articles, we have already