IPad won’t turn on after long non-use

iPad won’t turn on, apple is on and off

If you are faced with a situation where your favorite iPad does not turn on, the “apple” is on and off, do not rush to carry the device to the service center. There are several ways in which it is possible to restore the tablet to work at home.

Charging check

The very first thing to do, if the iPad does not turn on, the “apple” lights up, then goes out, is to check the state of charge of the device. It is possible that you missed the signal on the iPad screen that its battery is in a low state. At the same time, the charging icon itself may not blink. the iPad will react to a full discharge with a completely black display, on which the apple logo will appear for only a second. Even if the tablet “hangs on an apple”, the cause of the malfunction may be the same.

  • connect an iPad, which has an “apple” on and then turns off, to a “native” charger (chargers from phones, iPad mini and other Apple gadgets are not suitable)
  • wait at least 20 minutes
  • start iPad again

The use of the “native” charger is extremely important. Analog chargers are capable of overheating the iPad while it is connected to the network, which leads to various problems in its operation. Incorrectly used iPads freeze when turned on and stop charging at all. IPhone and iPod freeze in the same way.

If after charging your iPad still does not turn on, also check that the charging cable and outlet are working properly. connect some other phone or smartphone to them and make sure that they are charging. If gadgets work with this cable and outlet, please go to other iPad recovery methods.

Reboot the device

Another way to restore any Apple smartphones, when the iPad does not turn on, the “apple” is on and off “, is to reboot the device. This is done in three steps:

  • press the Home and Sleep keys at the same time
  • hold them for 10-15 minutes until the “apple” logo appears on the display
  • wait for the tablet to reboot

This reboot method restores almost all Apple gadgets in case of any software failure. This method is often used after installing a tweak from Cydia or a jailbreak, after which the iPad freezes quite often.

Flashing the gadget via iTunes

This is a rather aggressive way of dealing with software bugs, but if the iPad “hangs on the apple” and stubbornly does not turn on, then flashing is the last thing you can try at home. The method is bad in that you run the risk of erasing all or part of the data on your device after updating the iPad. This will happen if you have not backed up iPad to iTunes in the recent past.

Re-flashing in situations where the iPads freeze when turned on is performed in several stages:

  • install the latest version of iTunes on your computer
  • connect to the PC iPad, which turns off or constantly reboots on the “apple”
  • select the appropriate device type in the program settings and wait for the program to download the latest software version for it
  • simultaneously press and hold the power and Home buttons on the iPad. an “apple” will appear on the iPad screen, which will go out
  • follow the instructions in the iTunes dialog that opens on the PC screen

The program will prompt you to set up an iPad that is frozen and does not turn on as brand new (with a return to factory settings and a complete loss of all data) or restore the last backup.

Repair for mechanical damage

All described methods are suitable for home DIY repair of an iPad that is frozen and won’t turn on, provided that the damage to the device was not mechanical. If your tablet has turned off and no longer boots after it fell, then the reason for the constant reboot of the device may be an interrupted cable.

Additional signs of this are the following interference:

  • when turned on, the screen lights up and flashes
  • there are streaks and other imperfections in the image before it fades
  • the appearing “apple” has a fuzzy white color

If your iPad goes out due to mechanical damage, do not repair the device yourself. Try restarting your tablet or charging it as described above, then flashing the device. If none of the methods helped, and the iPad restarts and goes dead, take it to the service center.

The most profitable option is to entrust the repair of a non-bootable iPad to the Yuda performers. They will restore the tablet, which does not turn on and does not charge, as quickly as possible right at your home:

  • solder the dangling cable
  • will replace the broken glass of the screen
  • carry out professional software installation

Why there is no charging included with the iPhone

During the iPhone 12 event, Lisa Jackson, Apple’s vice president of Environment and Social Initiatives, noted that the shipment of new iPhones was limited for environmental reasons. The company wants all of its products to be carbon neutral by 2030. in other words, to reduce carbon dioxide emissions from the manufacture and transport of devices and accessories.

By removing two accessories (and reducing the size of iPhone boxes), Jackson claims Apple will cut over 2 million tonnes of carbon emissions per year, the equivalent of taking 450,000 cars off the road per year.

The iPhone box will now look like this

Therefore, now the entire series of iPhone 12 and iPhone 11, iPhone SE (2020) and iPhone XR in new packaging will come with a USB-C to Lightning cable. Previous devices (excluding the retired iPhone 11 Pro) shipped with a Lightning to USB-A cable. This change may or may not be taken as big or small depending on how you approach things, but it also allows Apple to make some extra cash.

General rules

The iPhone uses lithium-ion batteries to store energy. They have a number of advantages over conventional batteries. Their features:

  • have a high electrical density;
  • charge faster;
  • no memory effect;
  • weigh less than “competitors” with the same capacity;
  • have a long service life.

To charge a smartphone from Apple, you need to connect it to an electrical outlet using a charging cable and a branded power adapter that comes with the gadget. You can also charge your phone from a USB port on your computer.

Attention! Make sure the computer is turned on before connecting your phone to a PC. Otherwise, the iPhone will not only not charge, but may even be discharged.

If your smartphone supports wireless charging, then you can use this technology.

Expert opinionAleksey BartoshSpecialist in repair, maintenance of electrical equipment and industrial questionLet’s list the models that support wireless charging: iPhone 8 Plus, iPhone 8, iPhone X, iPhone XS Max, iPhone X s. iPhone XR, iPhone 11 Pro Max, iPhone 11 Pro, iPhone 11, iPhone SE (2nd generation).

ipad, turn, long, non-use

Recharging your new phone has some special features. Here’s how to charge your new iPhone for the first time. Immediately after purchase, put it on charge and wait until it is 100% charged. Now use your phone as usual, but do not charge it until it is completely discharged. It is advisable to make three cycles of full discharge and charge of the phone. To charge the phone in this way, you need to turn on the Qi charger to a 220 V electrical network through the power adapter supplied. Place your smartphone face up on it. After a few seconds, it will start charging. iPhone 7 and earlier do not support wireless charging.

Here are some tips on how to properly charge your iPhone:

  • It’s better to charge your gadget more often. There is no need to allow the battery to be completely discharged, and also to charge the gadget to 100%. Ideal if the energy level on the phone is between 40 and 80%.
  • After some time, the charging level indicator starts to show incorrect data. To correct, it is recommended to do a calibration every few months. To do this, you need to wait until the phone is completely discharged and turned off, and then charge up to 100%.
  • Use branded charger and certified cable. This is because lithium ion batteries are sensitive to conditions. Therefore, the original chargers are equipped with special PMIC controllers, which make sure that all parameters remain within the normal range. In non-original chargers, such a controller may be absent, which will negatively affect the battery life. For example, if the charging voltage is 4% higher than the nominal, the battery will lose capacity twice as fast.

Branded charger with certification sticker for iPhone 4, iPhone 4s, iPhone 5, iPhone 5s, iPhone 6.

ALL iPads Fixed: Not Rebooting, Black Screen, Won’t Turn On (2 Ways)

  • Make sure your iPhone has the latest software. For the operating system iOS 5 and later, to check for updates, you need to go to “Settings”, select the “General” menu and go to the “Software update” item. To update the program, you need to connect your smartphone to an electrical network and use a Wi. Fi network. You can also connect to a computer and use iTunes.
  • In order for the battery to last longer, it is advisable to optimize the settings: reduce the brightness and turn off its automatic adjustment. You can reduce the brightness in the control center by moving the slider down. To turn off the brightness control, you need to go along this path: “Settings”. “General”. “Accessibility”. “Display adaptation”.
  • The case may overheat the battery during charging. Therefore, it is better to take it off.

Besides the rules, the operating conditions are also important. The ideal temperature for iPhone operation is between 16 ° C and 22 ° C. It is harmful to use your smartphone in temperatures above 35 ° C. It is especially harmful to charge it at high temperatures, from which the capacity of the battery is irreversibly reduced. Even storing the battery in a hot room has negative consequences.

At air temperatures below 0 ° C, the battery capacity temporarily decreases, but this phenomenon is reversible. when the battery heats up, all its parameters will be restored.

Two cameras, but one new

Let’s start with the iPhone 12 and 12 mini. As with the previous generation, there are two main cameras. The iPhone XR and iPhone 11 feature a 12MP f / 1.8 wide-angle sensor. Here, the sensor is new, also at 12 megapixels, but with an aperture of f / 1.6.

The second sensor is an ultra-wide-angle 12 megapixel with an aperture of f / 2.4, a viewing angle of 120 degrees and a 5-element lens. That is, exactly the same lens that is now installed in the iPhone 11 and iPhone 11 Pro. And this is very sad, because the lens is of poor quality, gives a noticeable “soap” around the edges and it is a shame to install this in flagships with a price of 70 thousand rubles or more. But maybe this time software will help?

First, Apple’s Deep Fusion automatic photo processing system now works with the ultra-wide-angle module. Technology is even faster in iPhone 12 thanks to improved A14 Bionic processor, Apple says.

Secondly, the night mode is available not only for the main sensor, but also for the front camera and the ultra-wide-angle module. wait! What’s stopping the update from adding this to the iPhone 11? A question to which we will never know the answer. There is also a new function of time-lapse shooting in night mode (we don’t know what it is yet).

The official photo example of the ultra-wide-angle module iPhone 12

The third is the Smart HDR 3 system. It is not specified whether it works on all cameras, but most likely on the main two sensors. Smart HDR automatically adjusts the white balance and contrast of photos to make them look more natural.

In terms of video enhancements, the iPhone 12 and iPhone 12 mini are capable of capturing Dolby Vision HDR video at 30 frames per second.

IPhone 5 takes a long time to charge: reasons

Most often, it is not possible to quickly charge a smartphone for the reason that there is some problem in the chain device. cable. current source. over, at any stage, problems may arise. Next, we will dwell on each of them in detail.

READ  How To Turn On The Backlight On Acer Laptop

Problems with charging an “apple” device may arise for the following reasons:

The situation of slow charging was considered above, but if the gadget does not charge at all, then you need to check the current source. The easiest way to do this is to connect another device (phone, computer, etc.) to it and see if it will charge. If problems arise with other equipment, it means that it is not the iPhone or its accessories that need to be repaired, but the outlet or adapter.

Therefore, it will not be superfluous to repeat once again that you need to purchase only certified cables and other parts or accessories.

If the display does not display anything, it just keeps the black appearance of the screen, you need to put the gadget on charge and wait 20-30 minutes. Then you need to try to turn on the device. If the device does not react in any way, you need to hold down the home button and release it for 15-20 seconds. After that, the system should start.

If, after all the steps above, your iPhone is charging slowly, you should carefully inspect the connector, which could simply be filled with small debris. This often happens with devices that have been in operation for a year or more. In this case, you need to clean the connector with an ordinary toothpick and it is likely that the problem will be solved on this.

Also, the problem may arise due to malfunctions of the Lightning connector or socket. These faults can be identified by wiggling the plug at the base of the connector. If the indicator lights up during the test, it means that you need to replace the USB cable or charging interface.

Which charger to choose for the iPhone 12: TOP 10 best

iPhone won’t charge. iPad stopped charging. one of the most common problems among all iDevice users. The reasons may be problems with the devices themselves, but often we are still talking about software malfunctions. But don’t rush to call Apple! Let’s see how you can return the charge of “apple” devices to normal with your own hands.

IPad gets water

If your iPad stops turning on after being exposed to water, don’t worry. the tablet is recoverable. It is best to urgently consult a specialist, but in some cases you can cope on your own. If you have technique recovery skills, follow these steps:

  • unscrew the bolts, remove the back panel and take out the battery
  • check if there are any breakages
  • remove water from plumes, boards and contacts with paper towels
  • dry the tablet
  • assemble the device

IPad won’t turn on

If your iPad does not turn on, you can immediately contact the service center to the specialists or first try to cope with the task yourself. Many minor problems that lead to the tablet not turning on can be fixed on your own, even without special skills in restoring Apple technology.

If the battery is flat

The simplest and most obvious reason that led to the fact that the iPad Mini or Apple tablet of another model stopped turning on. the battery was completely discharged. Connect the charging cord to the device and wait about half an hour. If the iPad starts charging, then very soon you will be able to turn on the device, and it will work without errors. It should be remembered that after a complete discharge, the tablet takes a long time to boot.

Clogged or broken charger connector

If your iPad won’t charge (and therefore won’t turn on), it might be because the charging slot is clogged or broken. Follow these steps:

  • blow dust off the connector
  • clean it with a special paper clip

Most likely, after that, your tablet will start charging again when the cable is connected, it will be easy to start up and work correctly. If the connector is damaged, the tablet should be taken to the master.

Broken or unsuitable cable

Your iPad may not charge because the charger cord is damaged or the charging model does not fit your device. Apple technology is quite sensitive to the use of third-party wires. By connecting them, you will see an error notification on the iPad screen. In this case, all you need to do is replace the charger.

A short circuit has occurred

It is possible that a short circuit caused your iPad to shut down. Apple tablets have fixed power consumption figures. The use of third-party accessories can lead to the following consequences:

  • violation of the integrity of the electrical circuit
  • short circuit and burning of parts

If your iPad won’t turn on because of this, you won’t be able to fix the breakage yourself. An urgent need to contact a specialist.

Other breakdown symptoms

Other issues may appear when iPad won’t turn on. The most common ones are listed below:

  • Apple tablet shows the clock and goes out
  • iPad charging goes out
  • the screen turns off spontaneously, the iPad goes out

The on-off button is broken

Sometimes iPad shuts down and won’t turn on because a button is broken. When you see a black screen on the iPad, put the tablet on charge: if the power consumption starts, the battery indicator lights up, but when you press the power button, the device does not boot. the problem is in it. If because of this your iPad stopped turning on, you need to contact the wizard.

There was an error after jailbreaking or installing a tweak from Cydia

If your iPad shuts down, doesn’t respond to button presses, and the Apple logo lights up on the display, the problem is probably that you’ve jailbroken or installed a tweak from Cydia. This could have resulted in an iOS error that caused your tablet to freeze and not start. There are two ways out of this situation:

  • simple. to perform a HardReset (hard reboot). To do this, for 10-15 seconds, simultaneously hold down the on-off buttons and the “Home” button. Your Apple tablet may work properly again after a hard reset
  • difficult. to restore the operating system through iTunes. Connect your device to your computer. Wait until iTunes starts to light, press the CntrlS keys, and then go to the “Browse” folder. Perform a hard reboot. After that, you will receive a system prompt to restore the operating system. Agree and wait a while. After the update, your device will be ready for use again

Remember that by doing iOS Self-Repair, you are solely responsible for Apple hardware.

When the help of the wizard is needed, if the tablet goes out

If your tablet shuts down, won’t turn on, suddenly goes out, freezes up badly, and you can’t fix the problem yourself, contact an iPad repair professional. Masters registered on Yuda will provide urgent and inexpensive assistance in a situation when your iPad unexpectedly turns off or freezes.

Professionals registered on the site will quickly find out why your tablet goes out or does not turn on. Craftsmen use special tools, original spare parts and modern technologies. for whatever reason your device goes out, specialists will competently restore it in a short time.

Describe your situation in the application (for example: “iPad does not turn on”). the masters themselves will write to you in order to fix the breakdown efficiently and inexpensively.

Why does the phone or smartphone turn on for a long time after a factory reset?

This is rare, but it still happens that problems appear after a reset (sometimes you need to reflash).

Reset removes your installed apps, accounts, data and settings.

Only after the reset, some data may still remain in the phone and perhaps they affected the inclusion. try to repeat the reset one more time.

What to do if the phone does not turn on for a long time after flashing

If the smartphone does not turn on after the firmware, then the reason or problem is obvious. The device was not flashed well.

Maybe not even bad, but the firmware itself turned out to be inappropriate. What to do. flash in a new way.

What to do if the phone turns on for a long time

If you notice that your Samsung, ASUS, Lenovo, LG or other phone / smartphone will turn on for a very long time, you need not get upset, but get together and determine after what it happened.

Maybe he lay for a long time and now does not turn on, did not charge for a long time, no one used it, it happened after the firmware, after resetting the settings, just after a long period of non-use, and so on.

As you can see, there are many prerequisites and there is more than one solution. If this happened immediately after the purchase, then you need to either adjust / optimize, or return (you can return it within 14 days).

NOTE: if you have an Android phone and you haven’t rebooted it for a long time, it may take a very long time to turn on (manufacturers recommend rebooting once a week).

The system will start optimization and verification of applications, and if there are many of them, the process can take up to 5-10 minutes.

Let’s look at a few specific options for what to do if the phone starts to turn on for a long time or does not turn on at all

The phone was lying for a long time and now it does not turn on

If the phone / smartphone was lying for a long time, it was not charged. For example, the Android system is built in such a way that when the smartphone turns off on its own, due to the fact that the battery has run out, it still has 10% of the charge, although you are shown zero.

Further, after a long non-use, the charge will be used up by itself until the battery is completely exhausted, which after that may not be able to revive with the original charger.

You need to charge bypassing the controller, and for this you have to disassemble the device, which not everyone can do.

If the phone was lying without recharging, it may not turn on, even if it is recharged from the mains for a long time.

Many cell phone owners think that the device has broken down for some reason, and they throw it into the trash can or sell it for a penny for spare parts.

In fact, in 95% of cases, there is no reason to panic. In this case, the battery needs to be “pumped” with current a little more than in the native charger. You can swing the charger “frog”.

And so, if your phone does not turn on after a long period of non-use, then either go to the workshop, or “shake it”, then revive yourself.

Why did the Android smartphone start to turn on for a very long time

Android keeps cache, usually has little disk space and a lot of applications running in the background.

All of this has an impact on performance and inclusion. The solution may be to install additional applications, the task of which is to clean the system and disable unnecessary services running in the background.

Such a program can be OneCleaner, which can clean the system of unnecessary files.

iPad Becomes Completely Dead Won’t Turn On

I will not describe how to clean the device, because everyone has to choose the files to delete on their own and I do not want to offer a bad choice.

For the smartphone to work correctly, you need to constantly monitor all updates.

The fact is that the developers periodically release new updates to this or that model, which improve the work and performance in general.

If the developers have not stopped supporting your model, then all the necessary updates can always be downloaded from their official website. Success.

Discharged battery

In the course of healing a tablet fallen in battle, especially without expert knowledge, start with basic operations. first, check the battery charge by plugging your mobile device into an outlet. Leave skepticism aside. carelessness often leads to more serious consequences!

If the device is discharged, the corresponding indicators will light up on the screen.

READ  How to turn on the mouse on a lenovo laptop

Broken charging connector

Do not overdo it when you want to help an electronic friend.!

Excessive mechanical stress on the tablet destroys both the keys and the power ports. damaged or deformed pin-connectors are not restored, but change along with the connector. The situation becomes more complicated if the tablet has fallen. several cracked parts will have to be replaced at the service center and, of course, not for free.

Why can’t my computer see my HDMI TV? The answer is here.

  • blow off the dust;
  • clean the connector with the supplied paper clip;
  • try charging again;
  • carry out the procedure for non-standard cleaning of the power socket constantly, for prevention.

IPad won’t turn on. What to do?

The secret of the high popularity of Apple technology is guaranteed reliability and high quality of products: in the mobile device market, a combination of two factors bypasses competitors without a direct collision, but is the end user so protected? And is there any salvation from malfunctions at home?

The iPad went out in the most interesting place, does not respond to clicks, requests and outright threats? Stopped functioning due to flashed firmware and system errors? There are enough reasons for the death of the tablet. it’s time for an emergency recovery!

Users with Jailbreak installed may face the problem of incompatibility of tweaks and utilities downloaded using Cydia.

There is a way to restore iPad without tweaks:

  • turn off the device;
  • feel the volume lever “” and hold down the button;

If the device has booted, then try to clean the OS of problematic tweaks and return the device to normal operation.

ipad, turn, long, non-use

Short circuits

The design of Apple devices does not provide for the use of non-original accessories. fake chargers violate the integrity of the electrical circuit and cause a violent reaction, up to the internal combustion of individual components.

A stingy or incredibly cunning user always pays twice. Do not try to cheat the system and save money when buying a charger, the risk is not justified!

Remember a simple truth. the key to long-term use of a mobile device: correct operation!

Errors in the system

Software glitch is a popular cause, but can be easily resolved at home. Take advantage of:

  • hard reset using the Home and Power buttons held down for ten seconds;
  • reinstalling the operating system along with iTunes.

The methods are effective in all situations related to the software part of Apple tablets. it saves both after updating with errors and during operations with the file system.

After car charging

The problem is that some people don’t know how to choose the right car charger for their iPhone. People are trying to save money, accordingly they buy the cheapest options, which do not always have at least average quality.

After using low-quality charging, it may fail:

  • battery;
  • charging connector;
  • power controller;
  • specific power supply circuit.

As you can see, a small savings on the charger can translate into a decent amount for repairs.

If the phone stops turning on after using a low-quality car charger, there is nothing left but to carry it to a service center. Trying to determine the breakdown yourself, or, moreover, to repair the smartphone is by no means worth it, since inexperienced hands can render the phone unusable.

Voltage drops

Apple technology is very demanding on the quality of the incoming current, respectively, their chargers are made in a special way, have a complex design and principle of operation. If you charge it with a non-original device, then even a small voltage surge can damage your smartphone.

With a voltage drop, the power controller mentioned above suffers. It can be replaced, the cost, thank God, is small, but an unpleasant aftertaste remains, and you don’t want to part with your favorite gadget for a long time.

Hardware malfunction

If none of the methods described above helped you, it is most likely that the problem is in the hardware of the smartphone. There may be several reasons:

  • Normal wear and tear of electronic components
  • Ingress of water or other conductive liquids into the device
  • Battery malfunction
  • Malfunction resulting from the use of non-original accessories. charger, cable
  • Damage to smartphone connectors

Do not try to disassemble the iPhone yourself, even if you suspect a specific malfunction. Unskilled intervention can end badly for your iPhone, entrust this work to professionals.

iPhone has turned off and won’t turn on. contact the service center, an attempt to repair yourself will only aggravate the situation and increase the cost of further repairs.

The power button is broken

If you feel an odd tactile response when you press it, or if you don’t click, there may be a problem with the power button. The key itself is made of durable aluminum, but there is a fragile spring contact underneath. Metal crumbles due to impact or excessive pressing, blocking the operation of the power button itself.

To turn on the equipment, it is enough to apply voltage to the power controller. Simply put, plug in the charging cable.

To turn off and restart the device for a while, you can set the AssistiveTouch virtual button. By displaying the AssistiveTouch item in Settings General Accessibility.

If the buttons do not work

There is also the following option: the iPhone does not respond to button presses, and the screen of the last application is frozen on the screen. The first thing to do in this situation is to force restart the device. To do this, simultaneously hold down the “Sleep” / “Wake up” and “Home” buttons, and after ten to fifteen seconds you will see that the apple is on the screen again.

It happens that the device still does not turn on. Then you should connect to the charger and leave the iPhone charging for fifty to sixty minutes. You will soon see that the charging screen is on. If this does not happen, check carefully the connector socket, charger and cable. Perhaps the reason is in them. Try the same procedure using a different source of battery power.

Viruses

The last option that can only be encountered is viruses. Now they have gotten from computers to smartphones. That is why quite often gadgets refuse to work.

In fact, viruses on the iPhone are difficult to diagnose. You can immediately discard this option if you have not used the Internet yet, and your flash card has been checked for these. Then look at the previous options. there will definitely be something suitable there. But in cases where you are a real active user of the World Wide Web, do not be surprised.

In fact, if you do not want to suffer with this problem for a long time, then, of course, it would be best to take the iPhone to a specialized service and report your suspicions of virus attacks. In cases where the “diagnosis” is confirmed, the problem is eliminated, and you are prompted to install a special antivirus. Do not refuse, because it is he who will help eliminate the repeated penetration of the infection into your smartphone.

It is not worth fighting telephone viruses on your own. After all, the system here is more complicated than on a computer. It is for this reason that only specialists working in branded service centers can help you here. As you can see, there are quite a few reasons why the iPhone turned off and does not turn on. All of them, of course, are already familiar to us. And, as you can see, most of them are quickly eliminated.

Burnt out charge controller

When charging from a fake device or a bad cable, and due to voltage surges, the power controller may burn out. Often this happens from charging in a car, shock, moisture. The iPhone power controller is a microcircuit that is responsible for distributing and regulating the supply of power to all nodes on the motherboard and peripheral components. To fix it, you need to completely open the device, so you cannot do without the help of specialists. Replacement will cost from 1,500 rubles on older models of smartphones, and up to 8,000 on newer ones in unofficial services.

If the screen is black

When the iPhone looks at you with a blank, black screen, don’t panic. This does not mean that it is finished. Most likely, the reason is that the battery is completely discharged. The second reason may be a frozen iOS. Rehabilitation of the device is easy. The main thing is to do exactly what we tell you.

If the reason that the battery is discharged is the long stay of the iPhone in the cold, then first you should warm your device in your palms. Then connect the device to the charger for fifteen minutes. If the reason for the non-working iPhone is in a discharged battery, it will soon turn on. If this did not happen, it is possible that the frozen iOS is to blame. Then you need to press the HOME and POVER buttons simultaneously and hold them for ten to twenty seconds. You will soon see an apple on the screen. Release the buttons and after about a minute iOS will launch.

If in this case the long-awaited apple does not burn, we will tell you what to do. You need to turn silent mode on / off on iPhone two to three times in a row. Then plug in the charger for fifteen minutes. This operation, as a rule, always gives a positive result.

If these steps are unsuccessful, try changing the charger and cable. Perhaps they are the ones responsible for the iPhone not turning on. If, moreover, you are using not the original, but a cheap Chinese fake, this may be the reason.

The phone was lying for a long time and now it does not turn on

If the phone / smartphone was lying for a long time, it was not charged. For example, the Android system is built in such a way that when the smartphone turns off on its own, due to the fact that the battery has run out, it still has 10% of the charge, although you are shown zero.

Further, after a long non-use, the charge will be used up by itself until the battery is completely exhausted, which after that may not be able to revive with the original charger.

You need to charge bypassing the controller, and for this you have to disassemble the device, which not everyone can do.

If the phone was lying without recharging, it may not turn on, even if it is recharged from the mains for a long time.

Many cell phone owners think that the device has broken down for some reason, and they throw it into the trash can or sell it for a penny for spare parts.

In fact, in 95% of cases, there is no reason to panic. In this case, the battery needs to be “pumped” with current a little more than in the native charger. You can swing the charger “frog”.

And so, if your phone does not turn on after a long period of non-use, then either go to the workshop, or “shake it”, then revive yourself.

Why does the phone or smartphone turn on for a long time after a factory reset?

This is rare, but it still happens that problems appear after a reset (sometimes you need to reflash).

Reset removes your installed apps, accounts, data and settings.

Only after the reset, some data may still remain in the phone and perhaps they affected the inclusion. try to repeat the reset one more time.

The best answer

This happens. The battery is discharged below a critical level. Now even the controller does not have enough power. And the battery is dead, most likely. As usual, buy a new battery. In a perverted way. wait an hour for charging, without turning off the charging, take out the battery, put it on, wait a few more times. On some phone models it helps. I do not guarantee that the phone does not sport, but so far no one has had it)
Using the technology of a home craftsman. Unplug the battery, get to the lithium cell. There is a plus, a minus on it, they are so flat, they go to the battery charge controller. Apply to these wires a charge voltage of 4 volts somewhere and a current of 0.1 of the capacity. Those. if 1700 mAh, then 170 mA maximum current. Less is possible. No longer recommended. If you recharge a little, unplug it, put it in the phone, it will charge it normally. But the capacity of such dead batteries is usually small. A day or two for non-sensory ones. And half a day for touchscreen phones. Do not confuse plus and minus) And then your battery will bang cool. With a flame for half a meter. The pole is marked on the plastic near the gold-plated contacts. The positive one is connected to the cell body, the negative one is on the insulator substrate.

READ  How to turn off data saver on iPhone

What to do if the phone does not turn on for a long time after flashing

If the smartphone does not turn on after the firmware, then the reason or problem is obvious. The device was not flashed well.

Maybe not even bad, but the firmware itself turned out to be inappropriate. What to do. flash in a new way.

Why did the Android smartphone start to turn on for a very long time

Android keeps cache, usually has little disk space and a lot of applications running in the background.

All of this has an impact on performance and inclusion. The solution may be to install additional applications, the task of which is to clean the system and disable unnecessary services running in the background.

Such a program can be OneCleaner, which can clean the system of unnecessary files.

I will not describe how to clean the device, because everyone has to choose the files to delete on their own and I do not want to offer a bad choice.

For the smartphone to work correctly, you need to constantly monitor all updates.

The fact is that the developers periodically release new updates to this or that model, which improve the work and performance in general.

If the developers have not stopped supporting your model, then all the necessary updates can always be downloaded from their official website. Success.

What to do if the phone does not turn on after a long period of non-use?

Very often, users come to service centers with such a problem. The phone was left without recharging for a long time, and does not turn on after that, even if it is recharged from the mains for a very long time. Some cell phone owners think that the device has broken down for some reason, and they throw it into the trash can or sell it for a penny for spare parts. Although in 95% of cases, in fact, often if before that the phone did not fall and was not in the water, then there is no reason for panic, and that’s why.

If the phone is not recharged for a long time, then over time the battery is discharged almost to zero. I must say that if with a nominal voltage of 3.6 volts below 3.2 volts sits down, then this is enough for the phone to show no signs of life. That is, the battery controller sees that there is no battery at all and does not turn on the device. It is enough to “shake” in this case the battery with an electric current of a little more impulse than in the original phone charging. And having typed the required voltage (3.5 volts is necessary for the device to at least turn on), the battery will revive again, then it should be inserted into the phone and charged from the mains charging. This process resembles the case when a passenger car does not start and passengers have to push it in order to give an impulse to the starter. The role of the passenger-pusher in our case is played by a special device with adjustment of the required voltage for the swing battery. You can shake the battery with the same device popularly called a “frog”.

This device at home allows you to charge any battery from cell phones. You will find how to use this device if you enter in the search engine line: “Instructions on how to use a“ frog ”device with a universal charger.

And so, if your phone does not turn on after a long hibernation on the shelf, then either take it to the workshop and ask the battery to “swing”, it will cost no more than 50 rubles, or buy a “frog” and revive the battery yourself. Well, or just buy a new battery and use your mobile friend for health.

Answers

The battery lasts 2-3 years. Therefore, I guess that the phones were used before this “hibernation”, that is, most likely the battery has outlived its useful life.

just leave it on charge for half a day. will turn on. if you don’t need a phone, but you have it at home, then you should periodically charge it! all the same all this money is worth it! and just ruin the battery. not humane somehow = DD

put it on charge and turn on the phone, it may not turn on for a long time, and then turn on, you need to wait a while. or you need to replace the battery

Someone told me in the repair that after such cases it is necessary to put the phone on charge and after about half an hour it will start charging. Try =)

The phone was lying for a long time and now it does not turn on

If you notice that your Samsung, ASUS, Lenovo, LG or other phone / smartphone will turn on for a very long time, you need not get upset, but get together and determine after what it happened.

Maybe he lay for a long time and now does not turn on, did not charge for a long time, no one used it, it happened after the firmware, after resetting the settings, just after a long period of non-use, and so on.

As you can see, there are many prerequisites and there is more than one solution. If this happened immediately after the purchase, then you need to either adjust / optimize, or return (you can return it within 14 days).

NOTE: if you have an Android phone and you haven’t rebooted it for a long time, it may take a very long time to turn on (manufacturers recommend rebooting once a week).

The system will start optimization and verification of applications, and if there are many of them, the process can take up to 5-10 minutes.

Let’s look at a few specific options for what to do if the phone starts to turn on for a long time or does not turn on at all

Doing a hard reboot

It may well be that there was a failure in the Android firmware and therefore it does not want to turn on at all. Therefore, you need to turn on the phone with a special keyboard shortcut.

The smartphone must be fully charged and at least somehow respond to key presses.

Press simultaneously two keys on the case: volume down or up and power. Keep them pressed until the Recovery menu opens on a black background. If it appears, then this is very good, then the problem is software and we will definitely solve it.

In the menu, moving through the items is carried out by the volume and power buttons.

Now, let’s do a simple reboot. go to “reboot system now”.

If the problem is not resolved after it, then we will do a full reset. Remember that after a reset, all data from your phone will be erased. Go back to the moment when the menu appears.

Open the item “wipe data / factory reset” and confirm your intentions.

Next, go to the “reboot system now” item. After rebooting, the phone should turn on normally.

Interesting! I also recommend that you read the material. how to reset settings on Android. There we looked at how this is done in more detail.

Pull out SD card and sim card

On some Android devices, the cause may be a faulty SD card or SIM card. Remove them from your smartphone and try turning it on.

If everything worked, then most likely the SIM card or SD card will have to be changed to another one. If not, then we will look for the reason further.

Hold down the power button

First of all, you must try to turn on the smartphone by holding down the power key for a few seconds. It is usually worth holding it for 7 seconds for the device to restart.

The phone won’t turn on: why and what to do on Android

What to do if the phone does not turn on and, in general, refuses to give at least some signs of life. a fairly common situation.

In many cases, you can solve the problem yourself. The main thing is to determine the reason correctly, and already proceed from it, what will need to be done.

In the previous article, we looked at why the phone takes a long time to charge and how to fix this problem. Now we will figure out why the phone or tablet does not turn on, while it does not charge. it does not respond to charging, what to do in this situation.

Important! The manual is written for smartphones and tablets based on the Android operating system. How to solve the problem on smartphones from Apple, we have analyzed in detail and with explanatory pictures in the material. what to do if the iPhone does not turn on.

The battery has gone to full zero

If the phone is simply completely discharged and, after you put it on charge, nothing happens, then this is normal. Just wait, sometimes up to half an hour the smartphone may simply not turn on after being completely discharged. Already, if after this time nothing changes, you need to look for the reason.

The phone won’t turn on. why and what to do

In the cold or the sun

If the device was exposed to sunlight for a long time or, conversely, it was at sub-zero temperatures, and then turned off, then let it return to room temperature. Do not touch your smartphone / tablet for two hours. Then try to turn it on again.

Interesting! If your smartphone was drowned or a good amount of water just got on it, do not turn it on, immediately take it to a service center to dry and clean it there. Otherwise, the contacts will be oxidized and, even if you can turn on the smartphone, it will not work for long.