Laptops and Tablets • Recommendations and advice


How To Wire A Laptop To A TV

Table of Contents

Duplicating screen

Windows 10 projection how to connect a second screen

Hello! We continue to take apart the Windows 10 operating system! Today you will learn how to set up projection and connect a second screen on Windows 10. For example, you want to connect a TV or a second computer to your computer, or just an additional screen. You can not only connect an additional screen, but also be able to adjust the projection.

To connect the second screen, in the lower right corner of the screen, open the “Notification Center”, clicked on the corresponding icon in the form of a written letter. In the window that opens, click on the tab. Project. Projections need to be adjusted only after connecting the second screen.

Further, in the window that opens, you will have a choice of 4 types of projection:

How to connect a second screen

To connect the second screen, at the bottom of the “projection” window, click on the tab. Connect to a wireless device. Make sure the second device you want to connect is turned on. An automatic device search will start. The window should display its name.

How to connect devices:

How to connect Bluetooth:

Open the Action Center window in the lower right corner again. In the window that opens, click on the tab. Bluetooth. After that, the corresponding icon will appear in the taskbar.

Still have questions? Write a comment! Good luck !

Windows 10 projection how to connect a second screen updated: October 12 2016 by Ilya Zhuravlev

How to properly connect a laptop to a TV via HDMI?

Immediately, we note that in order to connect everything, it will be necessary to set the desired parameters on the TV and laptop. You will also need the HDMI cable itself. In addition, note that some laptop models only have a DVI connector. Then you will have to acquire also a special adapter.

The procedure itself for connecting a laptop to a TV via HDMI is quite SIMple. You need to do the following:

  • We make sure that there are connectors on both devices.
  • We turn off the TV and laptop. This is necessary in order to protect the ports. If you connect the cable with the devices turned on, then there is a risk of their failure.
  • Connect one end of the cable to the HDMI connector on the TV. Usually in modern TV-devices, it is located at the back or side. In this case, there can be several connectors. Usually they are all signed. HDMI 1, HDMI 2, etc. In which one do you Connect the difference cord comments.
  • Connect the other end of the cable to your laptop. Now turn on both devices and go to the connection settings.
  • We start with the TV. We take in hand the remote control and press the button on it, which is responsible for setting up signal sources. Often this is the “input”, “source” key (on LG, Samsung TVs, etc.) or “home” (on some Sony models).
  • A menu will appear on the TV screen (its interface is very different depending on the TV and the manufacturer!), Where you need to select the signal source. In our case, HDMI. If you choose the wrong option, the following message will appear on the TV screen: “Signal Sun”. Don’t be scared! Just click on another signal source.
  • That’s all. Most likely, everything worked out for you, and you are already watching a movie or playing computer games using a TV monitor, and not a laptop screen.
  • If the laptop is NOT connected to the TV and it was not possible to display the image on its screen, then on the laptop we go to “Start”. Further in the “Control Panel”. Click on the item “Screen resolution setting”. Next, in the “Screen” line, select the TV screen if it was NOT automatically recognized. Press the button “Find”. For laptops with Windows 10, you need to go to the system settings in the “Screen” section and call the “detect” button.

Useful information! Not all laptop models have an HDMI connector. In this case, some users, using an adapter, connect the device via VGA. This is a fairly old 15-pin connector that became popular in the 80s of the last century. However, due to this interface, no sound is transmitted. Therefore, in addition to the HDMI cable, you will need to connect an additional wire for the audio signal.

Problems when connecting a laptop to a TV via an HDMI cable are far from uncommon. Therefore, we will dwell on this point in detail. we will describe the most common problems and ways to solve them.

  • What if you connected everything correctly, but the TV screen does not show the image from the laptop? The first thing we do is sit down at the laptop. Right-click on the desktop. In the menu that appears, select the term “Screen resolution” (for windows 7, 8). Now you need to select “Multiple monitors” in the “Screen” item. Below you will see another option “Multiple screens”. Here we put “Duplicate desktop on the first and second”.
  • Why is there no sound on the TV? As we noted above, an HDMI cable carries an audio signal. So weird if the sound continues to come from the laptop and not from the TV device? How to fix it? Go to the notification panel and click on the sound icon. We choose “Playback devices” or “Sound devices”. it all depends on the OS version (Windows 7, 8, 10, etc.). In the list that opens, there should also be a TV to which you “legitimized” the laptop via HDMI. Click on it with the right mouse button, and then select “Use as default” or “Enable”. It remains only to click “Ok”. The sound should appear.

If, all the same, the TV does not see the laptop through hdmi, then it is worth checking whether you have connected the cable itself well to all connectors. The plug may NOT be fully seated in the jack. Sometimes it happens that the cable is NOT serviceable either. But this is very rare.

Sometimes there are conflicts that prevent the laptop from connecting to the TV via hdmi. The main reason is outdated or malfunctioning drivers. For example, cards. Therefore, if you cannot connect the device to the TV, then update the software for the adapter.

On a note! Connecting a laptop to an old TV via HDMI is unlikely to work. Mainly due to the lack of an appropriate interface. Therefore, if you have a rather “ancient” TV receiver, then you can connect it to a laptop only through RCA (everyone knows them as “tulips”).

How to connect a computer or laptop to a TV via HDMI?

Many people who have a large plasma or liquid crystal TV at some point think about connecting it to their computer or laptop. The opportunity to watch a movie on a big screen is of great interest to many users. First, let’s get acquainted with the possible ways of connecting THESE devices, then we’ll figure out the card settings, and at the end we’ll look at how you can output sound via HDMI. For the SIMplest connection of the aforementioned devices, you only need an HDMI cable with the same connectors at the ends. Any, even the most inexpensive cable is suitable, however Note, if you are going to use 3D mode, the version of the cable must be HDMI 1.4 or higher. Find the HDMI jack on the case computer as well as on the back of your TV. This is how this socket looks on the back of the TV: And this is an image of the socket on the side wall: But such a socket should be looked for on the back of the computer’s system unit: such a socket is located directly on the card, next to the connector for connecting a DVI or VGA monitor. If a discrete card is not installed in your system unit, the socket will be located on the motherboard, near the USB ports. With laptops it is lighter, the HDMI socket in them always looks the same, it just can be located on different sides in different models: In portable computer devices (tablets, netbooks, cameras, etc.) install mini-HDMI connectors, which are three times smaller than a conventional connector, so they need a mini-HDMI cable.

In many modern users, the LCD TV hangs on the wall, which makes it difficult to connect a massive cable to its back surface.

For such cases, cables are provided with the plug at right angles. You can also, if you wish, purchase a special HDMI corner. With this corner you can connect to the TV from the back or from the side. Some adapters even support the ability to adjust the angle and the bend in them is not straight, but in any direction. Before buying, decide in which direction the cable will come out after connecting it through the corner. Please note that different cable models are oriented in different directions.

You will not be able to connect without HDMI connectors (however, if you have a DVI monitor connector, you can use a DVI-HDMI adapter).

What is important to know about HDMI?

Recently, HDMI data transmission technology has become very popular. Largely due to the fact that with its help it is possible to broadcast an audio signal of a sufficiently high quality. This uses only one cable.

READ  How To Connect A Microphone From Headphones To Laptop

There are currently several HDMI standards:

  • 1.0 standard (speed up to 10.2 Gbps, support up to 8 audio channels)
  • Standard 2.0 (data transfer rate up to 18 Gbps, and support for up to 32 audio channels).

Many companies manufacture HDMI cables. Branded options are often quite expensive. However, many modern TVs have such a cable included.

How to connect laptop to TV via hdmi

Sometimes you need to connect your laptop to your TV. For example, to display an image on a larger screen. Since the “native monitor” is not always enough for comfortable viewing of photos or movies. For this, in most cases, an HDMI cable is used. After all, there is a connector for it in almost any modern TV device. You just need to understand how to connect a laptop to a TV via hdmi.

Features of setting up multiple displays

How to enable hdmi on windows 10

How to connect a computer to a TV via USB?

There are situations when the computer has an output with sound via HDMI. Or do you have an Apple laptop of one of the previous generations? Also, this problem is inherent in monoblock PCs, where a SIMple interface for a TV or a second monitor, alas, is often absent. This is where USB comes in. Universal computer interface, which any PC is endowed with in abundance. You can connect to it like mice, flash drives, printers, cameras and other peripherals, and TVs, projectors, monitors, which, in fact, will be discussed below.

Advice: If your computer or mobile device has free or no ports for connecting the screen, and there is no USB. It doesn’t matter, you can “enter” through the “back door”.

Let’s make a reservation right away that the article is designed for the most common USB standard today. 2.0, in turn, this will work for USB3.0 as well, but will not work for USB version 1. Here are the connectors that should be on a candy bar or laptop to connect the screen via USB:

Let’s consider two possible solutions: wired and wireless. Both work according to the same principle: a program is installed in the system that creates a virtual card and a sound card, and then output with sound from THESE devices is made via a universal USB bus to a device that can decode these signals.

Wired solutions

A wired solution is a module that connects with a wire to a computer and, on the other hand, connects to a TV, projector or monitor, as well as audio speakers or headphones. Windows, Mac, Linux and even some Android systems automatically recognize the device and install drivers on it. You can also force the driver to be installed from the manufacturer’s website, such as DisplayLink. You can view and select a suitable adapter here.

If you are a fan of gadgets and are ready to transfer to TV only files that he can play on his own from a USB flash drive connected to it, then it is impossible not to mention the Exotic solution, a USB-USB cable with a special controller. It SIMulates a USB flash drive for TV on the one hand, on the other hand, it is connected to a computer and “set” on the folder of your choice from media files. Thus, the TV “sees” these files as if on a connected USB flash drive, although in reality this is not the case. The decision is rather controversial, especially in the list of supported operating systems at the moment only Windows, and then, the “shaggy” version. If you are interested in such a “miracle of technology”, write in the comments, we have it.

Wireless solutions

Wireless solutions use a unique wireless USB standard, a broadband radio interface that is completely transparent to the computer. Here, our exclusive product U-140A holds a monopoly position.
Compact, easy to install and fast-acting kit, its tiny transmitter connects to your computer and is virtually invisible in it:

Both desktops, laptops and mobile devices are supported! The receiving part is connected to a monitor, TV or projector in any way, via HDMI and / or VGA, the sound is output both to HDMI and to the minijack speaker / headphone jack.
This is wireless mode. But the device can also work in wired mode. Just connect the receiver to your computer directly and WOOA-LA! A kind of universal harvester for any type of connection:

The performance of the device is at the level: excellent “pulls” FullHD resolution, works without delays, is resistant to interference.

The assembly is carried out in South Korea, so you can be triple peace of mind about the quality. information about the U-140A can be found on its page and also from the review:

When connecting a laptop to a TV via HDMI, there is sound, but there is an image

If everything seems to be working, but there is no sound, and no adapters are used, and this is just an HDMI cable, then try to check which playback device is installed by default.

Note: if you use any version of the adapter, then Considering that VGA sound cannot be transmitted, regardless of whether this port is on the side of the TV or laptop. Sound output will have to be configured in some other way, for example, to the speaker system through the headphone output (do not forget to set the appropriate playback device in Windows, described in the next paragraph).

Right-click on the speaker icon in the Windows notification area, select Playback Devices. Right-click on an empty spot in the list of devices and enable the display of disconnected and disconnected devices. Note if there is an HDMI device listed (there may be more than one). Click on You need (if you know which one) with the right mouse button and set “Use as default”.

If all devices are disabled or there are HDMI devices in the list (and they are also absent in the section of sound adapters in the device manager), then it is quite possible that you do not have all the necessary drivers for the motherboard of your laptop or for the card installed, they should be taken from the official laptop manufacturer’s website (for a discrete card. from its manufacturer’s website).

Connecting a laptop to a TV via HDMI is the best way

Almost all modern laptops have an HDMI or miniHDMI output (in this case, you will need a Corresponding cable), and all new (and not so) TVs have an HDMI input. In some cases, you may need adapters from HDMI to VGA or others, in the absence of one of the types of ports on a laptop or TV. over, ordinary wires with two different connectors at the ends usually do not work (see below in the description of the problems of connecting a laptop to a TV).

Why using HDMI is the best solution for connecting a laptop to a TV. Everything is SIMple here:

  • HDMI is a digital interface that supports high resolutions, including FullHD 1080p
  • When connected via HDMI, not only the image is transmitted, but also the sound, that is, you will hear the sound through the TV speakers (of course, if this is not necessary, you can turn it off). It may be useful: What to do if there is no sound via HDMI from laptop to TV.

HDMI port on laptop

The connection itself is NOT particularly difficult: We connect the HDMI port on the laptop with the HDMI input of your TV with a cable. In the TV settings, select the Corresponding signal source (how to do this depends on the specific model).

On the laptop itself (Windows 7 and 8. In Windows 10, it’s a little different. How to change the screen resolution in Windows 10), right-click on an empty space on the desktop and select “Screen resolution”. In the list of displays you will see the newly connected monitor, here you can configure the following parameters:

  • TV resolution (usually, it automatically determines the optimal one)
  • Options for displaying images on a TV. “Expand screens” (different image on two screens, one is a continuation of the other), “Duplicate screens” or display the image only on one of them (the second is disabled).

In addition, when connecting your laptop to a TV via HDMI, you may need to adjust the sound as well. To do this, right-click on the speaker icon in the Windows notification area and select “Playback Devices”.

In the list, you will see Intel Audio for Display, NVIDIA HDMI Output, or another option that matches HDMI audio output. Set this device as default by right-clicking on it and selecting the Appropriate item.

Many laptops also have special function keys in the top row to enable output to an external screen, in our case, a TV (if such keys do not work for you, then not all official drivers and utilities of the manufacturer are installed).

These can be FnF8 keys on Asus laptops, FnF4 on HP, FnF4 or F6 on Acer, I also met FnF7. Keys are easy to identify, they are labeled as in the image above. In Windows 8 and Windows 10, you can also enable the output to the external TV screen using the WinP keys (works in Windows 10 and 8).

Sun signal or just images from laptop on TV

If this problem appears, if you have Windows 10 or 8 (8.1) installed, try pressing the Windows keys (with the logo) P (Latin) and select “Extend”. The image may appear.

If you have Windows 7, then through the right click on the desktop, go to the display settings and try to define the second monitor and also set “Extend” and apply the settings. Also, for all OS versions, try to set for the second monitor (provided that it is visible) the resolution that it exactly supports.

How to connect a laptop to a TV

In this article, we will talk in detail about several ways to connect a laptop to a TV. both using wires and using a wireless connection. Also, the instructions will be on how to set up the correct display on the TV connection, which of the options to connect it is better to use in other nuances. The following are ways of wired connection, if you are interested in wireless, read here: How to connect a laptop to a TV via Wi-Fi.

Why might this be required? I think everything is clear here: playing on a TV with a large diagonal or watching a movie is incomparably more pleasant than on a small laptop screen. The instructions will cover both Windows laptops and Apple Macbook Pro and Air. Connection methods include HDMI and VGA, with the help of special adapters, as well as information on wireless connections. Also helpful: How to fix poor HDMI picture quality.

Attention: it is better to connect cables with switched off and de-energized devices in order to avoid discharges and reduce the likelihood of failure of electronic components.

READ  How To Play Games On A Weak Laptop

Connecting Apple Macbook Pro and Air Laptops to a TV

Apple laptops are equipped with a Mini DisplayPort output. To connect to your TV, you will need to purchase the Corresponding Adapter, depending on what inputs are available on your TV. Available on the Apple Store (and elsewhere) are:

  • Mini DisplayPort. VGA
  • Mini DisplayPort. HDMI
  • Mini DisplayPort. DVI

The connection itself is intuitive. All that is required is to connect the wires and select the desired image source on the TV.

Typical problems when connecting a laptop to a TV via HDMI and VGA

When you connect your laptop to your TV using wires, using HDMI or VGA ports (or a combination of both, when using adapters / converters), you may find that all of this does not work as expected. Below are typical problems that may arise and ways to solve them.

Problems with cables and adapters when connecting

It should also be borne in mind that very often problems with connecting to TV (especially if the output and input are different) are caused by poor-quality cables or adapters. And it happens Not only in quality, but in a misunderstanding that a Chinese cable with different “ends” is usually an inoperative thing. THOSE. An adapter is needed, for example: HDMI-VGA adapter.

For example, a common option. a person buys a VGA-HDMI cable, but it does not work. In most cases and for most laptops, such a cable will never work, you need a converter from analog to digital signal (or vice versa, depending on what is connected to what). It is only suitable for cases when the laptop specifically supports digital output via VGA, and there are almost no such.

wired connection options

In addition to HDMI-HDMI, you can use other wired connection options to display images from your laptop to your TV. Depending on the configuration, these may be the following options:

  • VGA. VGA. With this type of connection, you will have to separately take care of the sound output to the TV.
  • HDMI to VGA. if your TV only has a VGA input, then you will need to purchase an appropriate adapter for this connection.

You can assume other options for a wired connection, however, I have listed all the Most common, which you are most likely to encounter.

Wireless connection of laptop to TV

Update 2016: I wrote more detailed and up-to-date instructions (than what follows) for connecting a laptop to a TV via Wi-Fi, i.e. Wirelessly: How to Connect a Notebook to a TV via Wi-Fi.

Modern laptops with Intel Core i3, i5 and i7 processors can connect wirelessly to TVs and other screens using Intel Wireless Display technology. As a rule, if you have NOT reinstalled Windows on your laptop, all the necessary drivers for this are already there. Wirelessly transmits Not only high-definition images, but also sound.

To connect, you will need either a special set-top box for the TV, or support for this technology by the TV receiver itself. The latter include:

  • LG Smart TV (not all models)
  • Samsung F-series Smart TV
  • Toshiba Smart TV
  • Many Sony Bravia TVs

Unfortunately, I have no opportunity to test and demonstrate how it all works, but Detailed instructions on using Intel WiDi to wirelessly connect a laptop and ultrabook to a TV are on the Intel official website:

I hope that the methods described above will be enough for you to be able to connect your devices in the right way.

How can I connect a laptop to a TV using a DVI cable

DVI technology is of higher quality than VGA, it is digital. Today there are a large number of combo cables and adapters having one end with a vdi head.

Therefore, if you have, for example, a TV with a dvi input, and a laptop with hdmi, then you can safely use such a connection by using a combo cable or adapter (some modern TVs are sold with an HDMI cable, for example Samsung. in LG no).

To see if you have a dvi input, see below what it looks like.

How can I connect a laptop to a TV using an HDMI cable

Every modern laptop and TV has an HDMI output, for transmitting high-definition and high-quality digital signals including sound.

This means that using an HDMI cable, you can connect a TV and a laptop. What is his view, see the picture below.

HDMI inputs in TV and laptop look like this (see below):

Some modern TVs immediately come with an HDMI cable (they are NOT cheap), but how to set up a laptop will be described at the end of the post.

  • You can find out the for adapters and cables by clicking here.

Once connected, the image and sound of the laptop will be output to the TV. The picture of the image will be clear, and the sound without distortion.

How can I connect a laptop to a TV using a DisplayPort cable

DisplayPort technology can be said to be the newest, only a very small number of devices have such inputs so far. it is a competitor to HDMI technology, although it was developed to replace DVI.

If you find a DisplayPort input in your laptop or TV, then feel free to take up this connection. the signal quality is excellent. DisplayPort looks like this:

How to connect laptop to TV via vga cable

An old TV can be connected to a laptop via a VGA cable. This technology is NOT quality.

You can of course use an adapter, but the quality will not increase. The vga input is used for analog (conventional) signals.

Only when you connect a laptop to a TV via a vga cable, there is one thing. you will not have sound, you will need another cable. sound, as in the picture below.

VDI technology behaves much better. it is a digital option. Please note that if the vga input is available on both devices (laptop and TV), then you can use a combined cable or adapter to connect.

How to set up your laptop and TV to connect

As soon as you connect the TV to the laptop with a cable, first make the settings on the TV, namely: tell him which connection to use.

In old TVs, there is no such function, only in new ones. For example, in LG it looks like this:

Now let’s set up the laptop. Click on any free space on the laptop desktop with the right mouse button or touchpad.

A menu will appear. Click on the term “screen resolution”. In theory, if there is a physical connection between the TV and the laptop, then you should immediately see the second monitor, if it is not there, then click “find”.

When it appears (second monitor), select one of two options: “duplicate these screens” (the image will be on the laptop and TV) and “display only desktop 2” (only TV will work).

Also, opposite the “screen” time frame, specify the parameter you need. That’s not all. there may be no sound on the TV.

Then right-click on the “speaker” icon on the taskbar and click on the term “playback devices”.

A window will appear in which you should see your “box”. Select it, click “apply” and “OK” at the bottom (you can turn off other speakers).

That’s all. This description can be said to be universal, so it is NOT excluded that you will have problems during the connection process. there are enough nuances.

Sometimes you might need to customize the map. To do this, be sure to download the latest version of the card driver and, opening it, perform the installation of multiple displays in the section Required changes.

How this is done in NVidia, see the picture above. I have one laptop without changes in the manual mode of the card settings to the TV did not connect.

Today, there are thousands of different models of TV and laptop computers on sale (you can also connect a tablet, a smartphone).

Therefore, the standard connection option sometimes may NOT work. you have to experiment, especially for old models.

Nevertheless, the problem can always be solved. There will be problems. write in the comments. here answers usually appear quickly, sometimes instantly. Success.

How to connect a laptop to a TV

With a large TV and laptop with a small screen, many people want to connect them.

Before moving on to the description of how to connect a laptop to a TV, a little theory that will definitely benefit you.

Connecting a TV to a laptop is completely independent of the models. It can be like LG, Samsung TV. Panasonyk (regular, analog, old) and a laptop from Sony, Acer, Samsung, HP or Asus. the technologies are the same.

The first thing you will need Pay attention to the inputs and outputs in the TV and laptop. this is the most important step.

If you even have a Smart TV with Wi-Fi support, you can only connect the Internet without a cable.

You will NOT be able to play games, and the standard Smart TV browser itself is poor, and writing from the remote is inconvenient.

So, we look at the inputs and outputs. The best are HDMI and DisplayPort. they are the same “new” and accept, transmit the highest quality image and sound, and only one such cable is enough.

The dimensions of the HDMI cable for connecting a TV to a laptop are different: from 1 meter to 30. This is an important point, because if the TV screen is large, then sitting close, you will NOT see anything.

Also, keep in mind that if you do not have the input or output you need in a laptop or TV to connect, you can always do it by using an adapter or combo cable: HDMI. DVI, DVI. VGA, mini HDMI. HDMI, DisplayPort. DVI, DisplayPort. HDMI and so on.


Hello. Tell me how to change the size of the TV screen.

Not all the same, but something like this: enter the menu and go to the screen mode tab, then select the desired one (4: 3,! 6: 9, etc.). On modern TVs, the screen size can be set to any height and width.

Good afternoon! Tell me if you can do this: so that, for example, after connecting a TV cable with a laptop, it turns on cartoons and they are displayed on only TV. And on a laptop at this time, for example, to play or do other things.

There is no way to do this, the TV can only act as an understudy.

I want to connect my HP Compaq 7900SFF E8400 to my LG 32lh2010 TV. The computer has an Intel GMA X4500 card. True Displayport only output.
I tried to connect. True, for some reason it did not work right away. I tried to connect Apacer first, then again. Everything worked out. When connected, there is an image, there is sound. There is only on the computer itself. There is a TV in the computer settings, though only as a monitor. Available as an audio device. Only computer speakers. I reinstalled the drivers several times. Everything was downloaded from the native site of the Intel card. Confusing comments.
I’m trying to connect a 3.5mm stereo jack to a 3.5mm stereo jack via sound. Does not help. The sound, as expected, disappears on the computer, but it is on the TV. I haven’t tried the speakers, but I hope there shouldn’t be any problems. But I would like the sound on TV.
Can someone help solve the problem. I don’t even know what is the reason.
1 Cable. The cable is old. But how to check.
2. Displayport adapter. He’s new. In addition, the image is.
3.The card itself.
Don’t know how to try to fix:
1. Can try to connect via DVI adapter. Will there be any sense from this, except where on the computer they will turn it on. As I understand it from the VGA monitor connector. Hopefully right. Will only help.
2. Change the card. But will it make sense. Output is only Displayport.
If anyone had SIMilar problems, then write. Thanks in advance.

READ  How To Make The Keyboard Luminous On A Lenovo Laptop

After connecting the cable, you need a TV, set the default device in the sound settings and according to the instructions everything should work.
If there are all connections, but there is sound, then the problem may be with the cable or adapter (it worked for me once when the HDMI cable outputs were swapped).
You are left with nothing but experiments. The problem will be solved much easier if you are 100% sure that everything is OK with the cable and adapter.

I connected the laptop to the TV via an HDMI cable, the laptop screen went out, but the picture was not transmitted to the TV. We disconnect the cable from the laptop but the screen does NOT light up. I have to force restart the laptop. Tell me what the problem is

Try to swap the cable entries. If, after disconnecting the cable, the screen is black, try the keyboard shortcut: Windows (Image of the logo key) P.

Hello. On laptop, vga input. HDMI input on TV. Connection possible.

In this case, you can connect the TV to a laptop via an HDMI to VGA adapter.

The HP G7000 laptop only has a VGA and USB port on the LG 580 TV, the same VGA port when connected, the TV does not see the beech, although it indicates that the port is active, I tried to change the purity on the beech, everything is useless; the cord is good, what is the reason, tell me

The drivers on the card of the latest version are?

Not in the know, maybe not, the beech got inherited, so to speak, but what is necessary for the latest version? And where to get them?

In my version of Windows xp, after all the manipulations that it does not leave the graph of the installation manager and NOT Where I can not find it

I do not remember. I don’t have a single computer since XP. I can’t see it. Was on one laptop, but recently stopped the top ten. Can someone else give advice.

Okay, I’ll think to look for something

Hello, tell me if you wrote, your computer cannot transfer an image to another screen. Try reinstalling the driver or using a different adapter. What to do?

Try to update the card driver, or rather download and establish the latest version from the card manufacturer’s website. There are two of them; Nvidia and Radeon.

What else you need to remember

After viewing in the “Multimedia” mode, do not forget to re-enter the source selection menu and return to what was turned on, for example, it was the Antenna or HDMI input, especially if you enjoyed your photo at someone’s place. It’s not good to leave the owners without a TV if they don’t know how to get everything back. Believe me, it happens. Therefore, make sure the TV is showing TV programs again.

How to connect and what gives the connection of the phone to the TV via HDMI connectors

The next easy way to connect these two devices is via the HDMI port. And if your phone / smartphone has this connector, then there are generally problems. Externally Micro-HDMI (and in the phone it will be “Micro” sometimes “Mini”) is very SIMilar to “MicroUSB” but it is not the same thing. However, this type of output is not very common and there are not so many devices that have it.

For such a connection, you need a “MicroHDMI”. “HDMI” cable. We connect the phone and the TV with a cable. Using the free HDMI port of the TV. On the TV, we enter the menu for selecting signal sources (more about this was a little higher in the text) and select the HDMI item which corresponds to the number of the HDMI port to which you connected. This is in the event that THESE ports are several, for example HDMI 1 or 2. Often on the TV screen, the desired connected port is highlighted, so you will NOT be mistaken.

Microhdmi. HDMI connection

The image from the phone screen should appear on the TV, if suddenly this did not happen, then perhaps the problem is in the phone settings. Usually everything happens automatically, but if this does not happen, you can configure it manually. Go to phone settings and select the HDMI section. Next, we are looking for HDMI format. In the window that appears, select the resolution and frequency that your TV supports.

Advantages of this method: Everything on your smartphone screen is on the TV screen, surfing the Internet, watching a movie online,s, playing everything will be reflected through the big screen.

The disadvantages are that not all mobile devices have an HDMI output, as well as the fact that the phone will not be charged through this connection, you will have to connect the charger at the same time.

By the way, modern computers and laptops also have an HDMI port and it can also be used to connect them to a TV that has the same port. But here there is one important subtlety NOT Considering which you can disable both the TV and the computer. Read more about this here.

How To Wire A Laptop To A TV

However, whatever one may say The methods described above can already be considered outdated, they were replaced by new formats MHL, SlimPort and wireless technologies.

What’s next?

When everything is connected, we take up the TV remote control. Our task will switch it to the mode of reading media files.

How to do it? Here everything will depend on the TV manufacturer, different companies organize this path in different ways, some have a “MULTIMEDIA” or “USB” button right on the remote control. In some models of Sony and LG TVs, you can switch to multimedia mode through the “HOME” button.

Another very common option is to find the “Source” button on the remote control, it is often indicated by a rectangle with an arrow pointing inward. Click on this button and get into the menu for selecting signal sources, for example.

Menu for switching TV inputs, in this example you need to select the third item “USB”

But I repeat in different brands of TVs it will be in its own way, the general principle remains. “You need to choose USB as a signal source, or this item can be called” Multimedia “

We choose. And most often they get into another menu where we are asked to choose what type of files we want to View. ” “Audio” or “Photo”, select the one you want and view what you want. In fact, with such a connection, your smartphone acts as a memory card or flash drive, so if you had to view files from a flash drive on the TV, then you can handle the phone without problems, everything is the same, only a phone is connected instead of a memory card.

The advantages of this method are availability. a standard charging cable is used, which is widespread. And also the fact that the phone will be charged at the same time. The disadvantages include the fact that this method only allows you to view the files saved in the phone, but you will NOT be able, for example, surf the Internet and display all this on the TV screen.

You cannot display a picture from a smartphone screen on a TV screen. But there are other ways for this.!

How to connect and what gives the connection of the phone to the TV via USB connectors

The SIMplest possible connection is via the USB port. Your smartphone certainly has a MicroUSB port, I hope that your TV also has such a port, only without micro, just USB. We are talking about flat-panel TVs, you don’t need to look for Ego in older models.

The next ingredient we need is a connecting cable at one end of which there is a MicroUSB connector, and at the other USB. This is the same cable that you use to charge the phone, only now that end of the cable that you inserted into the charger needs to be connected to the USB port of the TV.

USB connection

How to connect your phone to a TV, via USB or HDMI

It seems quite recently that mobile phones have burst into our lives, and now no one is surprised that a modern phone is no longer just a phone. In terms of its capabilities, a modern smartphone surpasses the technology used by the air defense forces of the North American continent in 1965.

In fact, we are witnessing the fastest introduction of technology into our lives in history and often we DO NOT keep up with all the possibilities of our gadgets. Then in this article we will try to figure out how to connect the phone to the TV.

Why is this needed? Well, it’s probably a good idea to see your files on a large screen, for example, a photo or. A modern smartphone connected to a TV, in fact, can be used as a compact media player.

There are several different ways to make such a connection, which one is right for you depends on your devices and their technical characteristics. But let’s start in order. I will try to do as much detail as possible, since my experience shows that some users do not know, for example, how to make the necessary switchings on the TV.

Fast navigation through the article

But what about the adapter that allows you to connect MicroUSB to HDMI

There is a misconception that you can buy an adapter, which is enough to plug it into the MicroUSB connector of a mobile device, and. Voila! At the output, we have an HDMI signal for connecting to a TV. This is not entirely true, everything is somewhat more complicated in the second. Read more about this in the next article.