How to turn on the mouse on a lenovo laptop

How to unlock Lenovo touchpad?

Press the appropriate button (such as F6, F8, or Fn F6 / F8 / Delete) to disable the touch pad. If the key combination does not disable or enable the touchpad, go to Lenovo support website to download and install the latest touchpad driver, then try again.

How to switch on a laptop to a mouse?

Enabling the touchpad To enable the touch mouse on your ASUS laptop, press FnF9. If you have an Acer, then use the combination FnF7 to activate the touchpad. To understand which button you need to press to turn on the touch mouse on your laptop, look closely at the keyboard. Look for the touchpad icon in the F1-F12 key row. May 3, 2016.

How to enable the touch mouse on a laptop?

Enabling the touchpad To enable the touch mouse on your ASUS laptop, press FnF9. If you have an Acer, then use the combination FnF7 to activate the touchpad. To understand which button you need to press to turn on the touch mouse on a laptop, take a close look at the keyboard. Look for the touchpad icon in the F1-F12 key row. May 3, 2016.

How to turn on the HP touch mouse on a laptop?

HP ProBook 4430s Notebook PCs. Enabling the TouchPad with the Keyboard

  • Press the Start key on your keyboard (Windows logo key).
  • In the search box, type mouse.
  • Use the arrow buttons to highlight Edit Mouse Properties and press Enter.
  • Without leaving the window Mouse.

How to enable touchpad on Lenovo Windows 10 laptop?

Turning on the TouchPad on a Windows 10 laptop

  • For Asus, this is usually FnF9 or FnF7.
  • For Lenovo. FnF8 or FnF5.
  • On HP laptops, this can be a separate button or a double tap in the left corner of the touchpad.
  • There is a combination of FnF7 for Acer.
  • For Dell, use FnF5.
  • At Sony try FnF1.
  • Toshiba. FnF5.

How to enable the touchpad on a Toshiba laptop?

On almost all laptops, the TouchPad is turned on / off using one of the keys from the F1-F12 row, pressed in combination with the Fn button.Possible combinations for other manufacturers:

  • Acer. Fn F7.
  • Samsung. Fn F5.
  • Dell. Fn F5.
  • Lenovo. Fn F8 and Fn F5.
  • Toshiba. Fn F5.
  • Sony. Fn F1.

Reinstalling Drivers

For any device to function properly, certain software is required. You can download the drivers for the touch panel on the laptop manufacturer’s website in the “Support” or “Service” section. When loading, you need to pay attention to the following data:

  • Laptop Model.
  • Installed system version.
  • Bit Windows (x86 (x32) or x64).

Maximum compatibility is achieved when all three parameters match. But if there are exceptions: if the bitness of the system must necessarily match, then the version of Windows is allowed to be different. For example, on Windows 10, some drivers from Windows 8 will work fine, provided that an update has not been released for the “dozen”.

turn, mouse, lenovo, laptop

If the drivers are downloaded as an executable file with the exe extension, then they can be installed like any program using the installation wizard. If the installation wizard fails, add the drivers manually:

  • Open the control panel, set the view “Large icons” and launch the device manager.
  • Expand the Mouse section and find the touchpad. Right click on it and select “Properties”.
  • Make sure the device is in use and working properly.
  • Click on the Driver tab. First, try rolling back the software by clicking on the button of the same name. If rolling back the driver did not solve the problem, click “Update”.
  • The update mode selection window will appear. If you have already downloaded the necessary software from the manufacturer’s website, select manual installation.
  • Specify the path to the downloaded drivers and wait for the installation to complete.

After reinstalling the drivers, restart your laptop. Check the touchpad next time you start it. If it does not start to function, it is possible that physical damage is the reason for its inoperability. In this case, the question of how to turn on the touchpad should be asked by a specialist in the service center. Damaged can be:

  • Flex cable connecting the touchpad to the motherboard.
  • The sensor itself (for example, the panel cracked from the impact).
  • The south bridge is a microcircuit responsible for the operation of peripheral devices. If the south bridge is damaged, USB and LAN ports often fail.

You can disassemble the laptop yourself, using the instructions for your model, but this is not recommended, since unprofessional intervention is fraught with the appearance of even more serious problems.

Windows How to enable the touchpad on a laptop

How to turn on the touchpad on a laptop

The touchpad is a touchpad used to control the cursor by moving your finger across the surface of the panel itself.

At the request of the user, the operation of the touch panel can be blocked and then you will control the cursor only with a mouse connected via the USB port. How to unlock the touchpad on a laptop in order to use it in work?

  • The first way to enable the touchpad on a laptop is to find a hardware button on the laptop to lock / unlock. It is not available on all models and is located on the case, not in the keyboard area.

The second way to enable the touchpad is to use the Fn soft key and the F1-F12 additional key in the row. The additional key will have a touchpad icon (a rectangle with two keys at the bottom). The icon will be the same color as the Fn key. Enabling and disabling occurs after pressing the Fn Fx keys at the same time. An example of such a button:

Check touchpad entry in BIOS. Enter the BIOS when you restart your laptop and look for the Pointing Device entry there. To enable the touchpad, there must be an Enable entry opposite. Exit saving changes. It should be said that you need to work carefully with the BIOS, because these settings affect the performance of the entire laptop.

Check in Device Manager. is there a driver and is the device working properly. There you can also update the drivers if there is a problem with them. Usually, in case of problems in the device manager, there will be a yellow triangle opposite.

  • There may be hardware problems as well. just a malfunction of the device itself. Then you will need to replace the touchpad on the laptop in the workshop.
  • Try to restart the laptop.
  • How to enable touchpad on Windows 8, 8.1

    You need to open the search bar. In the search enter “mouse” and choose to change the parameters of the mouse. Go to touchpad options and enable the corresponding items.

    Turn on the Touchpad through the Control Panel

    Control Panel. Mouse. Device parameters

    In the last tab, you can enable or disable the touch mouse. You can also make a setting here that when you connect an external mouse, the internal touch will be disabled.

    Checking for Touchpad Drivers

    If your touchpad does not turn on using all of the above methods, then it is worth checking if the drivers for the touchpad are installed at all. To do this, go:

    Device manager open the entry with a plus sign Mice and other pointing devices

    If there is no touch mouse, or a yellow triangle with an exclamation mark is shown, then:

    • Right-click on the device in the manager and select “Update drivers”, if not found, then turn to the next item.
    • Check for their presence on the installation disc that came with the laptop. If absent, go to the next item.
    • Download drivers from the official website and install them.

    How to enable the touchpad on a laptop

    The Touchpad is a touchpad located below the keyboard that acts as a mouse. It only happens in laptops and netbooks. But more often than not, users prefer to use an external mouse. This pays off if a laptop is used as a replacement for a stationary computer, but if it is constantly moved, the mouse will bring discomfort. Therefore, now we will figure out how to turn on the touchpad on a laptop.

    Let’s look at the sequence of actions when connecting and disconnecting a touchpad. Fortunately for the user, the manufacturers have already worried about this and have provided several keys, pressing which will perform this function.

    • On ASUS laptop. FnF9;
    • On DELL laptop. FnF5;
    • On an Acer laptop. FnF7;
    • On a Lenovo laptop. FnF8;
    • On an HP laptop, take a look at the top row of F1-F12 keys. Each model has a different option;
    READ  Lenovo BIOS setup utility boot from flash drive

    Honor has it that each manufacturing company has come up with its own keyboard shortcut, which should be indicated in the documents accompanying the laptop. If there is no way to look at them, then experimentally they can be easily found. To do this, you will need to try a combination of the following keys:

    Some of the combinations will definitely work. At the same time, you can find out other functionality of the adjacent keys, which are responsible for screen brightness, sound volume, and so on. For example, an Acer laptop can turn on / off its touchpad by pressing the Fn F7 keys.

    Some laptops have a special key that turns on the touchpad right next to the touchpad itself.

    Enabling the touchpad on Windows 7

    1 Click Start and enter “mouse” in the search box. Select Mouse from the search results.

    2 Now you need to select Device Settings under Mouse Properties. There you select your touchpad and click “enable”.

    How to enable touchpad on Windows 8, 8.1

    You need to open the search bar. In the search enter “mouse” and choose to change the parameters of the mouse. Go to touchpad options and enable the corresponding items.

    Enable Touchpad via BIOS

    On selected laptop models, the touchpad can be enabled in the BIOS settings. To do this, you need to hold down the F2 or Del button while booting the computer. In the window that appears, select Internal Pointing Device, where Desabled changes to Enabled to enable, and vice versa to disable.

    Enabling the Synaptics touchpad

    If the laptop has a touchpad manufactured by Synaptics, then it has additional parameters through which the TouchPad is turned off. To check if the sensor is on:

    • Open Control Panel and go to the Hardware and Sound section. Go to the subsection “Mouse”.
    • In the properties of the mouse, go to the “Device Settings” tab (may have the name ELAN).
    • Click the Enable button if available and save the configuration by clicking OK.

    There may be another useful option in the mouse settings, when activated, the touchpad will automatically turn off when an external input device is connected. If the TouchPad does not work when the mouse is connected to the laptop, then the reason for this is the option presented above.

    If the “Enable” button is inactive, then the cause of the error should be looked for elsewhere. for example, in the BIOS settings.

    Restart the laptop

    Sometimes a simple restart of the laptop can help fix problems with the touchpad. When the system is restarted, the TouchPad will function again without interruption, so the user does not have to resort to the other recovery methods described below. To reboot, you can connect a regular computer mouse to the laptop. If you don’t have an external mouse, and you can’t use the built-in mouse, restart from the keyboard. There are several ways:

    • Click on the Win button (with the Windows logo on it) to open the Start menu. Use the arrows to reach the “Shutdown” item, press Enter and select restart.
    • Press CtrlAltDelete and use the arrows to reach the menu button with shutdown modes.
    • While on the desktop, press AltF4 and use the arrows to select restart.

    If the problem persists after restarting, try one of the following solutions to troubleshoot the touchpad.

    How to turn on the touchpad on a laptop

    The touchpad is a touchpad used to control the cursor by moving your finger across the surface of the panel itself.

    At the request of the user, the operation of the touch panel can be blocked and then you will control the cursor only with a mouse connected via the USB port. How to unlock the touchpad on a laptop in order to use it in work?

    • The first way to enable the touchpad on a laptop is to find a hardware button on the laptop to lock / unlock. It is not available on all models and is located on the case, not in the keyboard area.

    The second way to enable the touchpad is to use the Fn soft key and the F1-F12 additional key in the row. The additional key will have a touchpad icon (a rectangle with two keys at the bottom). The icon will be the same color as the Fn key. Enabling and disabling occurs after pressing the Fn Fx keys at the same time. An example of such a button:

    Check touchpad entry in BIOS. Enter the BIOS when you restart your laptop and look for the Pointing Device entry there. To enable the touchpad, there must be an Enable entry opposite. Exit saving changes. It should be said that you need to work carefully with the BIOS, because these settings affect the performance of the entire laptop.

    Check in Device Manager. is there a driver and is the device working properly. There you can also update the drivers if there is a problem with them. Usually, in case of problems in the device manager, there will be a yellow triangle opposite.

  • There may be hardware problems as well. just a malfunction of the device itself. Then you will need to replace the touchpad on the laptop in the workshop.
  • Try to restart the laptop.
  • BIOS setup

    The basic I / O system displays all the major components of the laptop. Accordingly, you can also control their work from here, and the touch panel is no exception.

    • Reboot your laptop. Press the Delete or F2 key to enter BIOS when powered on.
    • Go to the “Advanced” tab and find the “Internal Pointing Device” parameter. Set it to “Enabled”.
    • Save the configuration by pressing F10 and “Y”.

    On different BIOS versions, the names of the partitions and parameters are different, so it is better to find the manual for your laptop model on the official website of the laptop manufacturer and carefully study it.

    How to get cursor back on Lenovo laptop?

    To turn on the panel, you need to hold down the FnF7 combination (the touchpad symbol is applied to the button).The following key combinations may help solve the problem, depending on the manufacturer of the device:

    • Asus. FnF7 or FnF9;
    • Lenovo. FnF5 or FnF8;
    • Toshiba. FnF5;
    • Samsung. FnF6 or FnF5.

    How to enable the touchpad on an HP laptop?

    Properties, press CTRLTAB to go to the Device Settings menu. Press the arrow buttons to highlight the TouchPad under Devices. Press the Tab key to highlight the Enable button and press Enter.

    How to unlock Lenovo touchpad?

    How to enable / disable touchpad on Lenovo laptop

    • Fn F8 is the most common option
    • Fn F6.
    • Fn F5. Less common

    How to unlock the touchpad on a Dell laptop?

    With no touch pad switch:

    • Click Advanced Mouse Options at the bottom of the screen.
    • Select the Dell Touchpad tab.
    • Click on the image of the touchpad.
    • Move the slider to the “On” position or Off to enable or disable the touchpad.
    • Click the Save button.

    How to turn on the mouse on a Lenovo laptop?

    To connect the touchpad on a Lenovo laptop in this way, go to the “Control Panel”, select the “Mouse” section there, and there. “Device Settings”. In the tab you will find two functions: “Activate” and “Deactivate”. Check the boxes and the sensor setup on your Lenovo laptop will be done.

    Why is the touchpad not working on a Dell laptop?

    This can be done via the keyboard shortcut FN F3. http://kom-servise.ru/index.php/remon If the DELL inspiron touchpad does not work even when you press FN F3, then you need to install the drivers on the laptop’s touchpad. … Pressing FN F3 will disconnect or reconnect the touchpad.

    How to disable mouse on Lenovo laptop?

    Lenovo laptops use different key combinations to disable, most commonly Fn F5 and Fn F8. On the desired key, you will see the corresponding icon with a crossed out touchpad. You can also use Synaptics preferences to change how your touchpad works.

    How to enable touchpad on Lenovo laptop

    The touchpad or touchpad is an integral part of Lenovo laptops. In fact, it is a compact analogue of a USB mouse. On the one hand, the touchpad is very convenient, since there is no need to use a wired mouse, but on the other hand, it is not always convenient to use the touchpad, because it is located next to the function keys. Today we are going to talk about how to enable the touchpad on a laptop if it doesn’t work.

    READ  Laptop Can'T See Jbl Column Through Bluetooth

    Enabling and disabling the touchpad

    Now let’s see how to enable the touchpad directly using Windows 10. First, we enter the standard “Control Panel” by selecting it from the menu of the right click on the “Start” button. You can also use the control command in the Run menu (Win R).

    Next, as a view, you need to set the display of small icons, and then select the section of the mouse. In the properties window, a special Click Pad tab is then used, where the check mark is removed from the line to disable the internal pointing device when an external (USB) is connected. After that, the power button is pressed. If such actions for some reason did not give the desired result, you should press the button to restore the default values. In the panel that opens, you select the restoration of all parameters, and then the system is restarted.

    How to enable or disable the touchpad on a laptop (Windows 10) in the simplest way?

    Laptops are complex and rather specific devices. However, almost all models provide several combinations that are responsible for turning on and off some devices and basic functions (sound, Wi-Fi, screen brightness, etc.).

    Now. the solution to the problem of how to turn on the touchpad on a laptop. Windows 10 as an operating system is not important in this case. All the same, it has nothing to do with turning on the touch panel, so to speak, mechanically. This option uses the simultaneous pressing of the Fn key and one of the F1-F12 function buttons located in the topmost row of the keyboard.

    Depending on the manufacturer of the equipment, F4, F5, F7 and F9 can be used as the power key together with the Fn button, less often F1.

    Features of enabling the touchpad on HP notebooks

    Among all such devices, it is worth mentioning separately about HP laptops. In them, the manufacturer did not provide a way to enable or disable the touchpad above.

    To solve the problem of how to turn on the touchpad on a laptop (Windows 10. operating system, manufactured by Hewlett Packard) in this way, you need to look at the keyboard. The corresponding button must be separately placed on it.

    In some models, it may be absent, and the solution to the problem of how to enable the touchpad on a laptop (Windows 10) is to double or long press in the upper left corner of the panel.

    What to do first?

    If for some reason the touchpad has disabled, it may have been due to a system crash or short-term malfunction.

    In its simplest form, you can simply try to restart your laptop. Since the touchpad does not work, you will have to use the Win button, which brings up the “Start” menu, and then with the up arrow reach the shutdown line, press the enter key, select restart with the up arrow and confirm the selected action again with the Enter key.

    Thinkpad Lenovo Edge Yoga Laptop TOUCHPAD Mouse NOT Working Fix S1 E420 1580 15 E E550 Trackpad Stop

    It is important to remember that it is not recommended to use a forced shutdown by long pressing the power button, as this can cause system errors, and at the reboot stage you will have to perform a system recovery.

    Enable Touchpad via BIOS

    On selected laptop models, the touchpad can be enabled in the BIOS settings. To do this, you need to hold down the F2 or Del button while booting the computer. In the window that appears, select Internal Pointing Device, where Desabled changes to Enabled to enable, and vice versa to disable.

    Turn on the Touchpad through the Control Panel

    Control Panel. Mouse. Device parameters

    In the last tab, you can enable or disable the touch mouse. You can also make a setting here that when you connect an external mouse, the internal touch will be disabled.

    How do I enable the touchpad on my laptop? Windows 10: customizing the touchpad

    The touchpad (touchpad, touchpad) in laptops sometimes tends to be disabled. This may be due to the fact that it is simply deactivated, disabled in the system, or out of order. We will not consider the last case, let’s look at solving problems using publicly available methods.

    How to enable touchpad on Lenovo laptop

    The touchpad, or touchpad, is an essential component of all Lenovo laptops. This is a compact version of a USB mouse. On the one hand, this is a very convenient thing, since it eliminates the need to use a wired mouse, but on the other hand, using the panel is not always comfortable, because it is located near the function buttons.

    Today we’ll talk about how to turn on the touchpad on a Lenovo laptop if it stops functioning.

    Laptop Touchpad Not Working Problem!! Fix | LENOVO IDEAPAD

    How to enable the touchpad?

    You can activate the touchpad on Lenovo by the following methods:

    • The simplest technique is to use the hot keys “F” “Fn”;
    • Through the “Control Panel”;
    • Activation in BIOS. To do this, go to the setup menu, select there a section called “Internal pointing device” and set “Enable”;
    • You can. through the “Dispatcher”. If the required peripheral device is displayed there, then you can reinstall the drivers or update them;
    • In addition, it should not be ruled out that the touchpad could simply break. In such a situation, you should simply take the device to the master of the service center.

    All these methods work fine on Windows 10 and Windows 8 operating systems.

    Now let’s take a closer look at how to enable touchpad on Lenovo laptop with the above methods.

    Through the “Control Panel

    To connect the touchpad on a Lenovo laptop in this way, go to the “Control Panel”, select the “Mouse” section there, and there. “Device Settings”. In the tab you will find two functions: “Activate” and “Deactivate”.

    Check the boxes and the sensor setup on your Lenovo laptop will be done.

    Using BIOS

    You can activate the touch mouse on a Lenovo laptop through the BIOS menu. To do this, when loading the device, click the “F2” or “Del” button. Then, in the window that appears, select the section called “Internal Pointing Device”. There replace “Disabled” with “Enabled”.

    The main activation / deactivation system shows all the main components of the device. Therefore, from here you can control their functioning, and the touch mouse is no exception.

    To enable Lenovo touchpad in BIOS, you need to:

    • Reboot the laptop. When the system boots, click the “F2” or “Delete” button to enter the BIOS;
    • Enter the tab named “Advanced”, select “Internal Pointing Devicе” there. Set the parameter “Enabled” for it;
    • To save, click simultaneously “Y” and “F10”.

    In different BIOS versions, the names of the partitions are different. For this reason, it is better to look up the instructions for using your device on the Lenovo Internet resource and study it carefully.

    Using hotkeys

    Let’s take a look at this method using the Lenovo G50 as an example. To turn on the touchpad on a Lenovo G50 laptop, press F8 and Fn on the device at the same time. Using the same keys, you can turn off the touchpad.

    This combination can only work on Lenovo models. If the specified key on the Lenovo laptop keyboard does not function for some reason, then you should contact the wizard.

    Driver problem

    Drivers may have failed due to a failure due to reinstallation of the operating system. Without them, the panel may not function partially (for example, only gestures broke) or completely.

    Often, a driver disc comes with a laptop. But if there is no such disk, then the driver should be downloaded from the manufacturer’s resource. You can find them there in the section called “Service”. When performing a download, you should pay attention to the following data:

    • Bit Windows (x64, x32, x86);
    • The version of the installed operating system;
    • Device model.

    The ultimate compatibility can be achieved only if all three parameters match. However, there are some exceptions: if the bitness of the OS must be 100% the same, then a different version of Windows is allowed. For example, on Windows 10, drivers from the 8th “Windows” will function perfectly, but provided there are no updates for the 10th version.

    READ  How To Turn On The Keyboard Backlight On Honor Laptop

    If you download the drivers as an executable file (.exe), you can install it like a program using the installation wizard. If the latter does not start, then you should add the drivers manually. The action plan is as follows:

    • Go to the control panel, set the “Big icons”, start the device manager.
    • Using the cursor on a Lenovo laptop, open the section titled “Mouse” and select “Touchpad” there. Right-click on it and select “Properties”.
    • Verify the normal operation of the device.
    • Go to “Drivers”. First of all, try to roll back the software by clicking on the button of the same name. If this does not work, select “Update”.
    • A window for selecting the update modes will appear. If the required software has been downloaded, then select the manual installation option.
    • Assign the path to the drivers, wait for the installation to complete.

    After reinstalling the drivers, restart the laptop. During the launch, check the panel: if you still cannot turn off / turn on the touchpad on a Lenovo laptop, then most likely the reason is mechanical damage. Broken can be:

    • A microcircuit that ensures the functioning of peripheral devices. In this case, LAN and USB usually do not work;
    • Sensor;
    • Flex cable that connects the touch panel to the “motherboard”.

    You can also disassemble the laptop yourself, following the instructions supplied with the device. However, it is best not to do this, as unprofessional intervention can exacerbate the problem.

    We’ve shown you the most effective methods for activating the touchpad. If none of them helped to solve the problem, then you should contact the wizards for help. Maybe the panel is just faulty. The cause of the malfunction may be associated with moisture ingress, poor contacts, mechanical breakdowns. The service center staff will conduct a thorough diagnosis, identify the cause of the malfunction and quickly fix it, bringing the touchpad of your laptop back to life.

    How to enable or disable the touchpad on Lenovo laptops

    Depending on where the laptop is used and user preferences, the touchpad can be activated / deactivated during the initial setup of the device, or turned off when a mouse is connected. The most annoying thing is when the touchpad suddenly fails, especially if only the keyboard is available to correct the situation.

    Using Lenovo touchpad instead of an external mouse

    The touchpad, as a replacement for a conventional mouse, has advantages and disadvantages. First of all, it should be borne in mind that a laptop is a portable device, which is often preferred precisely because of its autonomy and mobility. In conditions where there is no flat surface for installing a laptop, the ability to use it without a mouse is very important.

    In modern laptops, the touchpad is convenient and allows you to perform all the necessary actions:

    • Open context menu.
      To do this, you need to press the button at the bottom of the touchpad or click on the touchpad with two fingers.
    • Flip the page.
      Mouse wheel replaces two-finger sliding on the touchpad.
    • Select text.
      If there is a button / buttons at the bottom of the panel, you need to hold down the left one, hovering the cursor at the beginning of the intended selection, and without releasing, slide another finger over the sensor. Or you can replace pressing the button with a double click on the touchpad.

    But the touch panel also has disadvantages, which may cause the need to disable it:

    • high sensitivity. the cursor reacts even to an accidental touch, for example, with a sleeve;
    • the impossibility of fast and accurate work, which is especially noticeable in games;
    • risk of accidental pressing when using the keyboard.

    In addition, some cheap laptop models come with poor quality touch panels that periodically fail, respond inadequately to user actions.

    Methods to enable / disable the touchpad on Lenovo laptops

    The touchpad on a laptop is needed so that you can use it without connecting a mouse, which is convenient on the road or when the device is on your knees. Sometimes the touchpad refuses to work. this can happen due to accidental shutdown by hotkeys or a settings failure. In most cases, enabling the touchpad on a Lenovo laptop is easy. just know which settings need to be changed.

    Hotkey enable in Windows 7, 8 and 10

    The easiest way to turn on the sensor is on a Lenovo laptop (or any other). First, you should check for the presence of a special button next to the panel. If it is not there, inspect the touchpad itself, in the corner of which there may be a small depression or a point that activates the sensor when pressed.

    In addition, there are hot keys to control the touchpad, usually from the functional row. On Lenovo laptops, enabling and disabling the sensor is usually controlled by F5, F6 and F8, the desired button is often distinguished by an icon depicting a panel. If a simple press of the key did not work, it is recommended to try holding it in combination with Fn.

    Enabling and disabling in BIOS

    Sometimes the inability to activate the touchpad is due to the BIOS settings. To correct them, you will need:

    • Open BIOS. To do this, when you turn on the laptop, you should start pressing a certain key. for Lenovo, this is more often F1, F2 or Del. You can get a hint at boot. before the OS splash screen appears at the bottom of the screen, there is a line “Press to enter SETUP”, where is the required button. Windows 8 or 10 users will need to first disable Fast Startup in Settings.
    • After opening the BIOS menu, go to the Advanced tab, where to find the “Internal Pointing Device” item, set the value to “Enabled” (or “Disabled” if the touchpad needs to be turned off).
    • Save changes with the key indicated at the bottom of the screen near the line “Save and Exit”. F10 is more often used.

    The laptop will restart, after which the touchpad should be activated.

    Basic ways to turn on / off the touchpad

    The sensor activation process depends on how the deactivation was carried out. If the touchpad fails while the laptop is running, it is recommended to restart the device first. If there is no result, go to the next steps.

    Possible problems with activating the touchpad on a Lenovo laptop

    Touchpad failure is not always caused by OS or BIOS settings. If it is easy to disable the touchpad on any Lenovo laptop model, then there may be problems with activating the sensor.