How to turn on the magnifier on iPhone 7

Turn on the Loupe feature on iPhone

turn, magnifier, iphone

Magnifier” is one of the non-obvious, but very useful functions of the iPhone, thanks to which its camera can be used to zoom in on surrounding objects, and this is possible both in real time and after the fact. We will tell you how to activate it and apply it in practice.

Using the Loupe function

To use the function in question after calling it, aim the camera lens at the object that you want to look closer. Magnifier provides the following options for working with images:

Scaling
To zoom in or out on an object in the frame, swipe from left to right or from right to left, respectively, along the zoom bar located at the bottom of the camera interface. A similar result can be achieved by swiping your finger from the bottom up over the area with the image to enlarge or in the opposite direction to reduce. Flash
If you have to use the “Magnifier” in a room with insufficient lighting or on a dark object, you can activate the flash. just touch the corresponding button on the screen. Save frame
You can use a virtual magnifying glass not only in real time, but also on static frames, which, moreover, can be saved separately. As a result, you will get an actually normal photo, but with pre-set zoom and focus parameters. For this:

If necessary, change the scaling of the image in the frame by increasing or decreasing it.

Tap the screen to focus on a specific area of ​​the image.

To save, hold down your finger on the frame, and then select the “Save Image” item in the menu that appears.

Focus lock
If you enlarge the subject in the frame, but at the same time want to maintain focus on it, press the button, made in the form of a lock. Press again to release the freeze frame. Light filters
One of the possible applications of the “Magnifier” is to enlarge the text, the initial readability of which may “suffer” for one reason or another. This can be corrected by applying light filters.

    Tap on the filter button (located on the right).

Check out the list of available filters and choose the one that suits your case.

To adjust the brightness and contrast, move the sliders marked in the screenshot below.

If you want to apply inverse filtering to the image, touch the corresponding button, and then adjust the parameters.

To apply the selected light filter, press the button to call this function. This action will also return you to the main Magnifier screen.

Closing the “Loupe”
To exit the feature in question, depending on your iPhone model, do one of the following:

  • Press the Home button (iPhone 8 and earlier);
  • Swipe up from the bottom of the screen (iPhone X and newer).

IPhone Magnifier

The function in question is not the main one, and therefore, like many others, it is hidden in the accessibility settings. To use it, do the following:

    Open “Settings” and go to the section “Accessibility”.

Note: On devices with iOS 12 and below, this item is located in the “General” section.

Tap on the item “Magnifier”, if you wish, read a brief description of how this function works, and turn the switch opposite to this name to the active position.

  • In order to call the “Magnifier” after its activation, do one of the following:
  • Press the “Home” button three times on those iPhone models where it is;
  • Triple-tap the screen lock (on / off) button on an iPhone without a physical button (X models and newer).
  • This will open a somewhat simplified camera interface, the controls of which we will look at separately later.

    Adding a Magnifier Button to a Control Center

    If you often have to access the function in question, and you find it inconvenient to press a physical button three times to call it, you can add a call button to the control center (CP).

      In iPhone Settings, go to Control Center.

    Move to the active position the switch “Access in applications” if it was previously disabled and / or if you want to have access to the control panel on any screen. Then tap on the item “Customize controls”.

    Scroll down the list of available options, find there “Magnifier” and tap the green plus sign located to the left of this name.

    The “magnifier” will be added to the list of the main elements of the control unit, which can be seen if you return to its beginning (scroll up). Here you can also define a more convenient location of the function call button. to do this, just hold down the three horizontal stripes on the right and move the item to the desired location.

    Now you can call the “Magnifier” directly from the control point. just swipe up from the bottom of the screen and tap the corresponding button.

    Now you know how to turn on the “Magnifier” on the iPhone and use it to enlarge objects in the frame, as well as change, improve their display on the screen.

    How to make / disable magnifier on iPhone

    Now it’s time to talk about how exactly to make this mode available for use on the iPhone, that is, enable it.

    Like other functions, it is quite easy to find and activate it, follow the next steps:

      go to Settings, click on the Basic item;

    then select Universal Access and click on the Magnifier parameter;

    we activate the Magnifier function and if you wish, you can also activate Auto Brightness.

    How to Magnify Screen on Apple iPhone 7 or ANY iPhone

    You already know how to use it from the section above. There shouldn’t be any particular problems, because everything is simplified as much as possible so that any iPhone user can figure it out.

    How to use the magnifier on iPhone

    Outwardly, it resembles a regular camera program, only now you have a constantly active slider to increase the image. It is activated quite simply, you just need to quickly press the Home button three times. Then the program appears and you can use it.

    But what is so special about this feature that Apple decided to add it to iOS 10. Let’s take a look at its capabilities:

      Magnification of objects: of course, the first and main opportunity is the usual magnification, which will allow you to read too small print.

    Flashlight: there is a button to activate the flash, which will allow you to use this program in the dark. Anything happens in life.

    Focus lock: pressing the lock will lock autofocus, allowing you to magnify subjects without constantly refocusing.

    Freeze the picture: the center button is not intended for photographing at all. It allows you to capture the image you see. You can zoom in or out in this mode. Then we press the same button and you return to normal mode.

    READ  Find iPhone function how it works

    Effects and Settings: You can also adjust contrast or brightness. You can turn on the white balance and much more.

    As you can see, the thing is quite useful and interesting. But where can I find it and turn it on, let’s figure it out.

    Magnifier function on iPhone

    This feature is called magnifier because it is essentially a real magnifier, only on your iPhone and digitally. If you have poor eyesight, then it will be very useful. Indeed, sometimes it is simply unrealistic to read the small print in newspapers, different labels or just instructions. By enabling this mode, you will make your life a little easier.

    This feature appeared only with the release of iOS 10, which means that only users starting from the iPhone 5 will be able to use it.

    How to turn on / off the magnifier on iPhone?

    Not many iPhone users are aware of such a great feature as the magnifier. And it’s not strange, because it is disabled by default and today I will tell you how to enable it.

    The magnifying glass mode is quite useful, so I would like to tell you more about it, which I will actually do. Let’s get started.

    Now you know how to use, enable or even remove the magnifier from your iPhone. The function is very useful and can be useful to you in life.

    At a minimum, you now know that such a regime exists and, if necessary, use it as needed.

    IPhone Magnifier

    The function in question is not the main one, and therefore, like many others, it is hidden in the accessibility settings. To use it, do the following:

      Open “Settings” and go to the section “Accessibility”.

    Note: On devices with iOS 12 and below, this item is located in the “General” section.

    Tap on the item “Magnifier”, if you wish, read a brief description of how this function works, and turn the switch opposite to this name to the active position.

  • In order to call the “Magnifier” after its activation, do one of the following:
  • Press the “Home” button three times on those iPhone models where it is;
  • Triple-tap the screen lock (on / off) button on an iPhone without a physical button (X models and newer).
  • This will open a somewhat simplified camera interface, the controls of which we will look at separately later.

    How to turn on / off the magnifier on iPhone?

    Not many iPhone users are aware of such a great feature as the magnifier. And it’s not strange, because it is disabled by default and today I will tell you how to enable it.

    The magnifying glass mode is quite useful, so I would like to tell you in more detail about it, which I will actually do. Let’s get started.

    Magnifier function on iPhone

    This feature is called magnifier because it is essentially a real magnifier, only on your iPhone and digitally. If you have poor eyesight, then it will be very useful. After all, sometimes it is simply unrealistic to read the small print in newspapers, different labels or just instructions. By enabling this mode, you will make your life a little easier.

    This feature appeared only with the release of iOS 10, which means that only users starting from the iPhone 5 will be able to use it.

    How to use the magnifier on iPhone

    Outwardly, it resembles a regular camera program, only now you have a constantly active slider to increase the image. It is activated quite simply, you just need to quickly press the Home button three times. Then the program appears and you can use it.

    But what is so special about this feature that Apple decided to add it to iOS 10. Let’s take a look at its capabilities:

      Magnification of objects: of course, the first and main opportunity is the usual magnification, which will allow you to read too small print.

    Flashlight: there is a button to activate the flash, which will allow you to use this program in the dark. Anything happens in life.

    Focus lock: pressing the lock will lock autofocus, allowing you to magnify subjects without constantly refocusing.

    Freeze the picture: the center button is not intended for photographing at all. It allows you to capture the image you see. You can zoom in or out in this mode. Then we press the same button and you return to normal mode.

    Effects and Settings: You can also adjust contrast or brightness. You can turn on the white balance and much more.

    As you can see, the thing is quite useful and interesting. But where can I find it and turn it on, let’s figure it out.

    Using the Loupe function

    To use the function in question after calling it, aim the camera lens at the object that you want to look closer. Magnifier provides the following options for working with images:

    Scaling
    To zoom in or out on an object in the frame, swipe from left to right or from right to left, respectively, along the zoom bar located at the bottom of the camera interface. A similar result can be achieved by swiping your finger from the bottom up over the area with the image to enlarge or in the opposite direction to reduce. Flash
    If you have to use the “Magnifier” in a room with insufficient lighting or on a dark object, you can activate the flash. just touch the corresponding button on the screen. Save frame
    You can use a virtual magnifying glass not only in real time, but also on static frames, which, moreover, can be saved separately. As a result, you will get an actually normal photo, but with pre-set zoom and focus parameters. For this:

    • “Catch” in the lens the area or object that you want to save, and click on the button to create a picture (large circle in the center at the bottom).

    If necessary, change the scaling of the image in the frame by increasing or decreasing it.

    Tap the screen to focus on a specific area of ​​the image.

    To save, hold down your finger on the frame, and then select the “Save Image” item in the menu that appears.

    Focus lock
    If you enlarge the subject in the frame, but at the same time want to maintain focus on it, press the button, made in the form of a lock. Press again to release the freeze frame. Light filters
    One of the possible applications of the “Magnifier” is to enlarge the text, the initial readability of which may “suffer” for one reason or another. This can be corrected by applying light filters.

      Tap on the filter button (located on the right).

    Check out the list of available filters and choose the one that suits your case.

    To adjust the brightness and contrast, move the sliders marked in the screenshot below.

    If you want to apply inverse filtering to the image, touch the corresponding button, and then adjust the parameters.

    READ  What to do if iPhone shows iTunes

    To apply the selected light filter, press the button to call this function. This action will also return you to the main Magnifier screen.

    Closing the “Loupe”
    To exit the feature in question, depending on your iPhone model, do one of the following:

    • Press the Home button (iPhone 8 and earlier);
    • Swipe up from the bottom of the screen (iPhone X and newer).

    Adding a Magnifier Button to a Control Center

    If you often have to access the function in question, and you find it inconvenient to press a physical button three times to call it, you can add a call button to the control center (CP).

      In iPhone Settings, go to Control Center.

    Move to the active position the switch “Access in applications” if it was previously disabled and / or if you want to have access to the control panel on any screen. Then tap on the item “Customize controls”.

    Scroll down the list of available options, find there “Magnifier” and tap the green plus sign located to the left of this name.

    The “magnifier” will be added to the list of the main elements of the control unit, which can be seen if you return to its beginning (scroll up). Here you can also define a more convenient location of the function call button. to do this, just hold down the three horizontal stripes on the right and move the item to the desired location.

    Now you can call the “Magnifier” directly from the control point. just swipe up from the bottom of the screen and tap the corresponding button.

    How to turn on the magnifier on iPhone

    Now you know how to use, enable or even remove the magnifier from your iPhone. The function is very useful and can be useful to you in life.

    At a minimum, you now know that such a regime exists and, if necessary, use it as needed.

    “Magnifier” is one of the non-obvious, but very useful functions of the iPhone, thanks to which its camera can be used to zoom in on surrounding objects, and this is possible both in real time and after the fact. We will tell you how to activate it and apply it in practice.

    IPhone Magnifier

    The function in question is not the main one, and therefore, like many others, it is hidden in the accessibility settings. To use it, do the following:

      Open “Settings” and go to the section “Accessibility”.

    Note: On devices with iOS 12 and below, this item is located in the “General” section.

    Tap on the item “Magnifier”, if you wish, read a brief description of how this function works, and turn the switch opposite to this name to the active position.

  • In order to call the “Magnifier” after its activation, do one of the following:
  • Press the “Home” button three times on those iPhone models where it is;
  • Triple-tap the screen lock (on / off) button on an iPhone without a physical button (X models and newer).
  • This will open a somewhat simplified camera interface, the controls of which we will look at separately later.

    Using the Loupe function

    To use the function in question after calling it, aim the camera lens at the object that you want to look closer. Magnifier provides the following options for working with images:

    Scaling
    To zoom in or out on an object in the frame, swipe from left to right or from right to left, respectively, along the zoom bar located at the bottom of the camera interface. A similar result can be achieved by swiping your finger from the bottom up over the area with the image to enlarge or in the opposite direction to reduce. Flash
    If you have to use the “Magnifier” in a room with insufficient lighting or on a dark object, you can activate the flash. just touch the corresponding button on the screen. Save frame
    You can use a virtual magnifying glass not only in real time, but also on static frames, which, moreover, can be saved separately. As a result, you will get an actually normal photo, but with pre-set zoom and focus parameters. For this:

    • “Catch” in the lens the area or object that you want to save, and click on the button to create a picture (large circle in the center at the bottom).

    If necessary, change the scaling of the image in the frame by increasing or decreasing it.

    Tap the screen to focus on a specific area of ​​the image.

    To save, hold down your finger on the frame, and then select the “Save Image” item in the menu that appears.

    Focus lock
    If you enlarge the subject in the frame, but at the same time want to maintain focus on it, press the button, made in the form of a lock. Press again to release the freeze frame. Light filters
    One of the possible applications of the “Magnifier” is to enlarge the text, the initial readability of which may “suffer” for one reason or another. This can be corrected by applying light filters.

      Tap on the filter button (located on the right).

    Check out the list of available filters and choose the one that suits your case.

    To adjust the brightness and contrast, move the sliders marked in the screenshot below.

    If you want to apply inverse filtering to the image, touch the corresponding button, and then adjust the parameters.

    To apply the selected light filter, press the button to call this function. This action will also return you to the main Magnifier screen.

    Closing the “Loupe”
    To exit the feature in question, depending on your iPhone model, do one of the following:

    • Press the Home button (iPhone 8 and earlier);
    • Swipe up from the bottom of the screen (iPhone X and newer).

    Magnifier function on iPhone

    This feature is called magnifier because it is essentially a real magnifier, only on your iPhone and digitally. If you have poor eyesight, then it will be very useful. Indeed, sometimes it is simply unrealistic to read the small print in newspapers, different labels or just instructions. By enabling this mode, you will make your life a little easier.

    This feature appeared only with the release of iOS 10, which means that only users starting from the iPhone 5 will be able to use it.

    How to use the magnifier on iPhone

    Outwardly, it resembles a regular camera program, only now you have a constantly active slider to increase the image. It is activated quite simply, you just need to quickly press the Home button three times. Then the program appears and you can use it.

    But what is so special about this feature that Apple decided to add it to iOS 10. Let’s take a look at its capabilities:

      Magnification of objects: of course, the first and main opportunity is the usual magnification, which will allow you to read too small print.
    READ  How to change the unlock password on iPhone

    Flashlight: there is a button to activate the flash, which will allow you to use this program in the dark. Anything happens in life.

    Focus lock: pressing the lock will lock autofocus, allowing you to magnify subjects without constantly refocusing.

    Freeze the picture: the center button is not intended for photographing at all. It allows you to capture the image you see. You can zoom in or out in this mode. Then we press the same button and you return to normal mode.

    Effects and Settings: You can also adjust contrast or brightness. You can turn on the white balance and much more.

    As you can see, the thing is quite useful and interesting. But where can I find it and turn it on, let’s figure it out.

    How to turn on the magnifier on iPhone

    Adding a Magnifier Button to a Control Center

    If you often have to access the function in question, and you find it inconvenient to press a physical button three times to call it, you can add a call button to the control center (CP).

      In iPhone Settings, go to Control Center.

    Move to the active position the switch “Access in applications” if it was previously disabled and / or if you want to have access to the control panel on any screen. Then tap on the item “Customize controls”.

    Scroll down the list of available options, find there “Magnifier” and tap the green plus sign located to the left of this name.

    The “magnifier” will be added to the list of the main elements of the control unit, which can be seen if you return to its beginning (scroll up). Here you can also define a more convenient location of the function call button. to do this, just hold down the three horizontal stripes on the right and move the item to the desired location.

    Now you can call the “Magnifier” directly from the control point. just swipe up from the bottom of the screen and tap the corresponding button.

    Now you know how to use, enable or even remove the magnifier from your iPhone. The function is very useful and can be useful to you in life.

    At a minimum, you now know that such a regime exists and, if necessary, use it as needed.

    “Magnifier” is one of the non-obvious, but very useful functions of the iPhone, thanks to which its camera can be used to zoom in on surrounding objects, and this is possible both in real time and after the fact. We will tell you how to activate it and apply it in practice.

    How to use the hidden magnifier feature in iOS 10 for iPhone

    IOS 10 has a small well-known feature called Magnifier. Essentially, it turns your iPhone‘s camera into a kind of magnifying glass with a user interface specifically designed to make reading easier.

    It is hidden in the accessibility settings, as this feature was designed for visually impaired users. This is how you can enable it.

    Now you know how to use, enable or even remove the magnifier from your iPhone. The function is very useful and can be useful to you in life.

    At a minimum, you now know that such a regime exists and, if necessary, use it as needed.

    How to quickly remove a magnifying glass?

    If the magnification has already appeared on the screen, the first thing to do is to double-tap the display with three fingers. At this moment, the increase should disappear, but it is worth understanding. it will not be disabled forever and may appear again.

    To turn off the appearance of this “magnifying glass” once and for all, you need to go to “Settings”. “General”. “Accessibility”

    and there select the item “Increase” and put it in the off position.

    You can also not go to the settings, but make a swipe down on the home screen and enter “Zoom” in the search bar. This will quickly bring you to these options.

    Few people know, but if you make a triple tap, with three fingers on the iPhone screen in iOS 11, you can call the settings of this mode, where you can also adjust its other parameters, for example: the degree of screen magnification, lens size, add filters and much more.

    • How to uninstall apps in iOS 11 on iPhone and iPad
    • HEIC format than open and how to convert to JPEG
    • Why iOS 11 turns on Wi-Fi itself and how to turn it off
    • How to detect if the iPhone is artificially slow
    • How to use Apple Pay on iPhone X

    Apple is attentive to iPhone and iPad users with disabilities, coming up with all sorts of features to make them more convenient to use.

    In iOS 10, there is such a magnifying glass function, it is useful for users with poor eyesight. Today I will describe: how to turn the magnifier function on and off on iPhone and iPad.

    Enable magnifier in settings

    • Open the Settings app
    • Click “General”, then the “Accessibility” tab.
    • Tap Magnifier and tap the switch to turn it on
    • If desired, tap the Auto Brightness switch to automatically adjust brightness and contrast based on ambient light when using a magnifier

    How to manually adjust brightness and contrast in a magnifier

    • On iPhone and iPad with a Home button, three times press the Home button to activate the magnifier. On iPhones and iPads with Face ID, triple-click the Side button to activate the magnifier.
    • Click the Filters button in the lower right corner of the screen. Looks like three circles are shifted together.

    Click and drag the sliders from left to right until you reach the desired brightness and contrast.

    Screen magnifier iphone. How to use your iPhone or iPad as a magnifier. VoiceOver and Pronunciation Editor

    Apple is always kind to its users and often pleases with various updates. The corporation often comes up with cool features that make it easier for people to use the device.

    The iOS 10 update introduces an interesting feature. a magnifying glass that can be used by iPhone and iPad users. This technology is very useful for people with poor eyesight, will you agree? We will tell you how you can turn it on and off in this article.

    Magnifier in iPhone 7 how to turn on?