Typically, after inserting a SIM card, the device tries to connect to the network immediately. If it doesn’t, try changing the parameters as follows:
- Contact the operator, ask to send a message with the connection parameters.
- Open the configuration parameters sent to you and click “Install”.
- The system will ask you to enter a PIN. Enter combinations from 1 to 4 or 0000, if this did not work, check the PIN code with the operator.
- Save settings, restart your phone.
Samsung Galaxy S8: How to Turn Internet Secret Mode On / Off
At startup, turn on data transfer and enjoy the full operation of your smartphone.
Enabling Data Transfer on a Samsung Smartphone
There are several ways to enable mobile Internet. This can be done literally in a few clicks: in the interface of modern smartphones, this function is taken to one of the first positions, since almost all the work of applications and the operating system as a whole is connected with joining the World Wide Web.
Setting up data transfer on a two-SIM phone
If your device supports 2 SIM cards, you need to establish a connection from the second SIM card in the same way and choose which card you want to connect to the network from. At any time you can change the parameters in the “SIM-cards” section.
How to enable (set up) data transfer to Samsung
Mobile Internet has become an integral part of our daily life. Connection is required for full communication, watching your favorite videos, news, listening to music and many other useful functions. Users are interested in how to enable data transfer to Samsung in order to fully use all the features of smartphones from a renowned Korean brand. It is very easy to do this: the interface of modern smartphones is intuitive even for a child, so connecting to the Internet will only take a few seconds.
Manual data transfer setting
If an error occurs during automatic access control, try doing it manually. Repeat the following steps:
- Check with your operator for network access parameters. Employees of the company will send you an SMS or dictate data by phone, or perhaps such information is available on the official website.
- Open the smartphone menu and select the “Settings” menu item;
- Select “Connection”, then “Mobile network”;
- Open the line “Access points”, click “Add”;
- On the screen that opens, fill in all the fields with the data dictated by the operator.
Save changes, return to the previous menu. Select a previously configured point. Reboot your phone and turn on the internet.
Possible problems and frequently asked questions
The most common reason for not being able to connect to the Internet is a weak network signal. Try to move to a place where the connection is better, or restart the phone.
The next reason is the “Guest” mode on the phone. In this mode, it is impossible to configure and change the connection. Switch to custom mode and try to reconnect data transmission.
The last reason for the lack of Internet is the insufficient amount of funds on the account. Mobile Internet is a paid service, it is paid separately or is included in the price of the tariff. Check your balance, if there are not enough funds, top up your account or try to connect Wi-Fi.
The second way is to enable or disable mobile internet on any Android phone
The second way to enable or disable mobile Internet, for example, in honor phones, Huawei 10, Samsung a50, Samsung a6 and so on is a little longer, but also more effective, since you can make additional settings in it.
To do this, go to “Settings” and go to “Connection” and select “SIM card manager”.
Now we click on the item “Mobile data” and select the SIM card on which we want to get the Internet.
That, in fact, is all. If the service on the SIM card is connected, then the mobile Internet should then be connected.
As I warned you above, some parameters may have a different name as it depends on the Android version. I took pictures from android 7.
ways to enable and disable mobile internet on any Android phone
On Android phones Samsung Galaxy, Honor, Huawei, ASUS Zenfon, bq, Xiaomi, Sony Xperia, Nokia lumiya, Meizu, Lenovo, zte, Alcatel, Fly can be turned on and off almost instantly as a mobile Internet
So quickly you can turn on and off the distribution of mobile Internet to other devices. to a smartphone, tablet or laptop.
It doesn’t even depend on the service provider. mts, kyivstar, megaphone, beeline, tele2, motive, phoenix or any other, only, of course, you first need to connect such a service with the operator.
Below I will show you 3 ways, only depending on the version of android, the parameters in your smartphone or tablet may not completely coincide with those in the pictures.
The first method is to instantly enable or disable mobile internet on any Android phone.
On any modern Android phone, such as Honor 10, sony, Xiaomi, asus zenfone, Samsung a10, Samsung a3, huawei, Meizu m6, huawei y6, you can turn on or off the mobile Internet in 2-3 seconds.
To do this, you only need to move the shutter twice by hooking the top of the screen with your finger (on some versions, you need to move from right to left a second time).
Then you will see an icon in the form of two arrows. One press. turn on the mobile Internet, the second. turn off.
How to activate 4G Internet on your Samsung Phone
In other words, if the arrows are displayed in blue, then the mobile Internet is on, if in gray, it is disabled. All this is shown in the photo at the beginning of this section.
The second way is to enable or disable mobile tethering on any Android phone
You can also turn on the distribution almost instantly. To do this, as indicated in the first section, move the curtain from top to bottom twice (in some versions, the second time you need to move it from left to right) and click on the icon “Mob. point access “.
Gray icon. disable distribution blue. enable. In the picture above, the distribution of mobile Internet is disabled.
I will share the secret of how your smartphone can save your life. Did you know that your phone has a feature that could save your life? Now I will explain to you how to activate it and how to use it.
Each of us would like to avoid accidents, but statistics clearly show that they can meet each of us.
It is worth knowing that even in the most tragic moments, modern technology can allow us to immediately seek help and thereby save our lives.
Most of us carry smartphones in our s, and it is definitely worth activating the alarm message function in them.
If you suddenly find yourself in a serious threat to life and health and cannot even call the emergency number. you can inform 4 people close to you about your situation by sending an alarm message.
If you enable this feature on your phone, you will need to quickly press the phone’s power button three times and they will be sent a message with your location, as well as a photo taken with the front and rear cameras.
How do I enable the “SOS” message function? You can use it on Android phones. To enable it, you need to go to the “Settings” of the phone, open the section “Additional settings” and find the tab “emergency messages”.
After entering the alarm messages menu, you must enter the “Main contacts management” option and enter the number of people to whom we would like to address our emergency message.
Then you just need to turn on the “send help messages” feature and keep your fists so you never use them. Success.
How to enable mobile internet on Samsung Galaxy
It is difficult to imagine life without a smartphone, and mobile devices themselves without a stable working network. Setting it up correctly on Samsung gadgets shouldn’t be too difficult. The main thing is to follow a few simple tips to figure out how to turn on the Internet on “Samsung”.
Manual Internet Configuration
If the automatic method does not work, the problem can be easily corrected with your own hands. How to set up Internet on “Samsung” manually:
- Request the setup data from the cellular operator, which is necessary for the operation of the Network on smartphones and tablets. You need to call the technical support representatives or study the corresponding section on the official website.
- Open device menu.
- Select the item dedicated to settings.
- Find the “Connections” tab. If there is no such section, go to the next step.
- Then open the item with the name “Mobile networks”.
- Find a tab with an access point.
- Click on the “Add” button. Sometimes they use a function with options if there is no other option. To do this, you can select the icon with the image of three buttons on the right.
- A new profile will open, which must be filled out according to the recommendations from the operator.
- Confirm saving the changes made.
- Select created profile.
- Enable “Mobile Data”.
- Reboot device.
Important! At the end, all options need to be checked for operability.
About the properties of Wi-Fi networks
Information about the network used and its characteristics is always available. To do this, just click on the line where the wireless connection is indicated. The following information is usually available:
- network speed, measured in megabits;
- the security or type of encryption used;
- The IP address of the device in relation to the local network. Usually, the router selects this parameter automatically, but you can assign properties manually by visiting your personal account to manage the device;
- IP address for router management.
Phones and tablets automatically remember all networks previously used by the owner of the device. You can disable or enable the automatic connection function when the first information on networks appears.
Note! Using the WPS buttons on routers provides a simplified connection diagram. Thanks to this function, the system does everything automatically, no additional action is required from the user. It takes no more than 1 minute to connect according to this scheme.
If you’re not using Wi-Fi, it’s best to turn off the network to conserve battery power on your device. Some models from “Samsung” provide for the transition of networks to sleep mode. To do this, you need to go to the additional network settings to enable the corresponding option.
Now you can connect to the World Wide Web immediately after purchasing the device. Some errors can occur only if the user is in a hurry, does not follow the instructions. The main thing is to keep the operating system and model in mind. The process remains approximately the same for all models, but some differences are possible, although they are insignificant.
This instruction concerns the setup and subsequent connection of the smartphone to the global network using the mobile Internet (via the SIM card of your operator). If you need to connect to a router, read the material:
Mobile Internet on Samsung phones
In any phone, you can adjust the settings regarding:
- APN access point and its characteristics;
- data channel;
- the name assigned to the profile. Without it, the mobile phone simply won’t get in touch.
Note! The parameters must correspond to the cellular operator and the phone itself.
Usually, the Internet starts working immediately after inserting a SIM card into the device. All parameters are set automatically. Therefore, additional actions on the part of the user are practically not required. He will instantly understand how to connect the Internet on a Samsung phone.
How to enable mobile internet on Samsung Galaxy
Hey! Today I will show you how to enable mobile internet on your Samsung Galaxy phone. What it is? This function turns on the Internet from the mobile operator to which you are connected. If you use the Internet at home from Wi-Fi, you need to disable the transmission of mobile data, otherwise you will be charged for the used traffic. Everything is very simple and fast. See the instructions below and write Комментарии и мнения владельцев if something is not clear to you. Go!
How to enable mobile data on Samsung Galaxy
On the home screen of your smartphone, swipe down from the top of the display.
A window will open. Pull the window down to the very bottom of the screen.
Here you will have the Mobile Data function displayed. Click on it.
The icon should turn blue. So you have turned on mobile Internet and mobile data transfer.
On the main or secondary screen, find the Settings button and click on it.
In the settings, click on the Connections tab.
Next, on this page, click on the Data Usage tab.
All is ready. Here you can enable data transfer. You can see here how much mobile traffic you used.
Still have questions? Write a comment! Good luck!
How to enable mobile internet on an Android phone
How to turn on internet on Android phone? This is a simple step, however, in some cases you will need operator assistance or remote assistance from your mobile operator’s support team.
It is hard to imagine the world in the 21st century without Internet access. Previously, this was done only from a computer, but in the era of development of digital technologies, almost everyone carries in their s a device with access to broadband mobile Internet, which is not inferior in speed even to ordinary wired home Internet providers.
The Internet is necessary in a smartphone not only for viewing sites, but also for the operation of all applications, support for updates, and watching videos on YouTube. A device without access to the world wide web loses part of its functionality.
Of course, games without a connection will work, but messengers, YouTube, a browser and social networks will not. In addition, more and more users of smartphones on the Android or iOS operating system prefer to communicate through the popular instant messengers. WhatsApp or Viber to regular calls. They allow you to make free not only audio calls, but also video communication. And to connect a standard package of SMS-messages, thanks to messengers, is not worth it at all.
Connection to the network occurs automatically under the following conditions:
- A SIM card is installed in the device,
- The region has Internet coverage and 3G and 4G networks,
- The tariff plan implies the use of mobile traffic (both limited and unlimited, depending on the operator),
- Smartphone is properly configured to receive and transmit data.
Sometimes automatic configuration does not work or the Internet is disconnected and you have to resort to methods of manual parameter selection. Let’s see how to set up a connection using the example of a Samsung Galaxy smartphone from a popular Korean company.
How to turn on the Internet on Android
Today the following communication standards are available in the Russian Federation. 2G, 3G, 4G. The first is the most common and the slowest. This network mainly allows standard calls and SMS forwarding. 3G allows you to access the Internet at medium speed, with low, medium video quality for example.
4G is already a full-fledged high-speed network coverage and the network is available only in settlements (and even then not in all). On the road, it is unlikely to be able to use it. However, data is sent and received at a high speed.
If 2G is specified in the default settings, then you will not be able to use newer generation networks. If 4G is enabled by default, then the smartphone or tablet will support all three types of connections, depending on the region and coverage. The ability to use traffic largely depends on it. Let’s take a look at the connection method using Samsung Galaxy as an example. Step-by-step instruction:
- In the main menu, tap on the “settings” button,
- Select “mobile networks”,
- In the “network mode” section, select 3G or 4G, depending on the configuration of the device.
Check your data connection in the main menu in quick settings or in network settings.
Internet connection via Wi-Fi
The first option is global, this one is local. Wi-fi is available only in those points where there is an appropriate device. a router or modem that distributes wireless communication.
Public places, cafes and restaurants, airports and train stations, libraries and universities, as well as shopping centers are in most cases equipped with Wi-fi routers. And the public hotspot is not password protected. Just turn on the Wi-Fi mode on your phone (data reception) and select the desired network. If you have a password, ask the owner of a cafe or other place and enter it. Any modern Android device has the function of receiving a Wi-FI network and distributing it. Let’s consider the latter in more detail.
Internet connection from another phone
A known method of gaining access to the World Wide Web is an access point or “distribution” of the Internet. This is especially useful when the tariff provides unlimited Internet. To do this, check this option in the tariff settings and in the quick access menu to the settings, click on the “access point” icon.
Then, from another device, connect to the access point via the Wi-Fi function. You will need to enter the password set by the user (if installed), distributing the Internet. We recommend that you set a password so that everyone around you does not connect to you.
How to switch the Internet to the desired SIM card on Samsung Galaxy Duos from SIM 1 to SIM 2 or vice versa. Samsung Galaxy how to turn off the Internet from one SIM card and turn it on to another.
How to switch the Internet to the correct SIM card on Samsung Galaxy Duos. In this article, we will look at how to change the SIM card in the settings on a Samsung Galaxy with two SIM cards with which we want to use the Internet on a smartphone. Earlier we already had an article on how to switch high-speed 3G and 4G Internet to the desired SIM card, and if you were looking for how to do this and got to this page, then you can go to the article on how to switch high-speed 3G and 4G to the selected SIM card on Samsung Galaxy by going by this link.
If you cannot find in the settings how to disable mobile data from one SIM card and enable it on another SIM card from which you want to use the Internet, then you have come to the right place. Below you will learn how to switch the Internet from SIM 1 to SIM 2 or vice versa on Samsung Galaxy Duos.
And so to switch the Internet Samsung Galaxy Duos to the desired SIM card, do the following on your smartphone: Open Settings. In the menu that opens, select the SIM card manager. Next, we find the item Data transmission network. Now you can choose from which SIM card to use the Internet with SIM 1 or SIM 2. You can also completely disable the Internet from both SIM cards by selecting Disable mobile data in the menu.
Many users of Samsung Galaxy duos on their own cannot find how to change the SIM card from which you need to use the Internet in the settings and the money goes away, do not stand the SIM card where the unlimited Internet is connected. And therefore, I think the article will be useful, especially for inexperienced users of Samsung androids. We hope this article helped you and you were able to switch the Internet to the desired sim card.
How to set up Internet on a Samsung phone: Automatic and manual
Without a smartphone. nowhere. But what kind of smartphone is it without a working mobile Internet? Today we will analyze how to correctly configure the Internet on a Samsung phone automatically, and if it does not work out, then manually.
Auto Internet Setup on Samsung
First, let’s try to enable the settings automatically. Almost all versions of Android, including Android 10, do this as follows:
- Open “Settings”
- Go to the “Wireless networks” section (there may not be such a section, so see paragraph 3 immediately)
- Open “Mobile Network”
- Then open “Mobile data transfer” and activate it with the slider.
As a rule, on all modern Samsung Galaxy smartphones, when you turn on mobile data, all settings are automatically pulled up, but if this has not happened and the Internet does not work, how to set it up manually.
Manual Internet setup in Samsung
To manually set up the Internet on the Galaxy:
- Open “Settings”
- Further “Wireless networks” or immediately “Mobile data transmission”
- Select the desired SIM card (if there are 2 of them) and open the “Access Point Names (APN)” section for it
- If there are no access points, then click in the upper right corner “three vertical points” and select “New access point”
To configure the access point, depending on the operator, use the following parameters:
- Access point (APN): internet.mts.ru
- Username (Login): mts
- Password: mts
- Access Point (APN): internet
- Username (Login): gdata
- Password: gdata
- Access point (APN): internet.beeline.ru
- Username (Login): beeline
- Password: beeline
- Access point (APN): internet.tele2.ru
- Username (Login): no need to fill
- Password: no need to fill
As soon as you entered the settings, check if the data transfer is enabled in the network settings. If there is no connection, try restarting your Samsung Galaxy.
If it does not work, you can send a request for auto Internet setup to the operator.
Here is a short instruction that will take you just a couple of minutes to read, and in the end you will regain the ability to use the Internet on your Samsung phone, whenever and wherever. Success!
If it was not possible to set up the Internet on Android, write about it in the Комментарии и мнения владельцев.
How to connect your phone to the Internet automatically
The first thing to do if the Internet has not appeared is to configure its automatic installation. You can turn on the Internet on Samsung like this:
- Open the settings message. Usually, the installation SMS comes automatically immediately after the card is installed. But if this did not happen, send a request to the telecom operator.
- Open the text of the message and in the window that opens, select “Application: Internet”.
- Click the install button. Most likely you will be asked to enter a pin code. The standard codes are 0000 and 1234.If none of these options came up, we recommend contacting technical support.
- After installation is complete, please activate mobile data and restart your phone to enable mobile data on Samsung.
Even this simple procedure usually helps if the Internet does not work on Samsung. That is why we recommend starting with it. If automatic setup is useless for you, and mobile data does not work on Samsung, go to manual.
Step-by-step setup of mobile Internet on Samsung phones in 2021
Mobile Internet, like smartphones themselves, have almost become an integral part of the life of almost all citizens. Someone finds useful information in them, someone makes an important meeting, and someone even works. Therefore, the lack of a network is at least a nuisance. Find out how to turn on the Internet on your Samsung phone.
How to set up Internet on a Samsung phone
On a Samsung phone, like on any other device, you can correct data such as username, password, access point characteristics, change the data transmission channel, and profile name. As a rule, the network starts working immediately after installing the SIM card without any additional actions from the user, since the entire installation takes place automatically. If this did not happen, you will have to figure out the problem yourself. There are two ways to enable mobile Internet on Samsung.
How to turn on Internet on Samsung manually
Manual tuning is not much more difficult than automatic tuning. You can connect mobile Internet like this:
- Ask your service provider for setup information. Keep in mind that there are no universal settings, and therefore without this information you will not be able to establish mobile Internet.
- Open the settings on your mobile device, and then select the menu with connections.
- Go to the section “Mobile networks” and “Access point”.
- Select “Add-ons”.
- In a new window, you will have an empty profile that you need to fill out based on the recommendations of the telecom operator. After filling out all the forms, save the settings.
- Select the created point and activate “Mobile data”.
- Reboot your mobile phone.