How To Turn On The Backlight On Acer Laptop

Lifting the ban

The keyboard on a laptop can be disabled intentionally. To make sure that comments are prohibited, check the Group Policy Editor:

  • Open “Start”, launch the “Run” menu. Register “gpedit.Msc” and click “OK”.
  • Navigate through the Computer Configuration / Administrative Templates / System / Device Installation / Device Installation Restrictions.
  • Open the option “Prevent device installation”.
  • Click Show and make sure there is no data inside. The ban itself must have a “Disable” charter.

If you checked all the software methods, but did not understand how to turn on the keyboard on a laptop, then pay attention to the physical condition of the laptop.

Enabling laptop keyboard

If you accidentally blocked the built-in device or the buttons stopped responding as a result of an error, then in order to fix the problem you need to know how to turn on the keyboard on a laptop.

Hotkeys

Judging by the forums, most often the spontaneous shutdown of the keyboard occurs after a little cleaning. Wipe the laptop with a cloth. the buttons stopped working. If the cloth was not wet and no liquid got into the case, then this problem can be eliminated quickly enough. Most likely, you accidentally pressed a keyboard shortcut that disables the built-in input device.

Some laptops use a combination of the Fn function button and one of the F1-F12 keys. for example, FnF1. to turn the keyboard on / off. To understand which key you need, take a close look at the icons. Look for a lock button, if you press it together with Fn, the keyboard will be locked.

If you need to turn on only the block with the numbers of the case, press Num Lock or the combination of FnNum Lock. If these combinations DO NOT help, look for the right combination in the instructions for the laptop.

Driver check

The built-in keyboard does not require the installation of special software, but if the device is entered does not respond, you should see how it is determined in the device manager:

  • Set the “Large icons” mode in the control panel. Open the “Keyboard” section.
  • Go to the Hardware tab. Make sure the “Status” line says the device is working properly.
  • Click on “Properties” and Make sure that the hardware is also detected correctly in the device manager.

You can try installing a utility for working with hot keys on your laptop (downloaded from the laptop manufacturer’s website). Perhaps the absence of such a utility prevents unlocking the buttons using a combination with the Fn key.

Hardware failure

If water gets on the keyboard, or the laptop was exposed to mechanical stress, you should contact the service. But you can try to independently determine the extent of damage to the laptop. See if the USB ports, network cable connector, and touchpad are working. If these components are also inactive, then the prerequisite for the problem is the failure of the south bridge of the motherboard.

If one keyboard does not work, try to disassemble the laptop yourself (provided that the warranty has already expired) and check the flex cable. Before opening the case, it is recommended that you read the disassembly guide for your model to avoid damaging fragile components.

On many laptops, the keyboard is held in place by recessed latches. You can move them away with a screwdriver. You should start from the left edge. Lift the edge of the keyboard with a screwdriver, pry the canvas with a needle, or gently pull the Esc key.

In this way, release the entire upper part of the keyboard so that it becomes possible to pull the canvas out of the case. You will see that the input device is connected to the motherboard with a ribbon cable. To remove it, you need to return the frame (there may be a different type of attachment, read the manual for your model).

Clean the contacts, and then reinstall the flex cable, securing it securely with the latch. If the keyboard or ribbon cable is damaged, you can replace it yourself.

Setting the keyboard backlight

Personally, I faced the following situation: the backlight worked for me and the brightness was adjusted, but its color was constantly changing. Or the keys can be highlighted in one color, for example, red, and that’s it. If you have a SIMilar situation, and you are interested in how to change the keyboard backlight color on an ASUS laptop, then read this paragraph.

As mentioned above, you cannot do this through the “Parameters”, so you have to download a special utility. Consider two: Armory Crate and Aura Sync.

Backlight does not work

If the keyboard shortcuts for adjusting the brightness do not work for you, or you are sure that the function itself is there, but the keyboard backlight on the ASUS laptop still does not work, even when the laptop is turned on, the buttons do not light up, then you need to deal with the drivers.

You can download them from the official ASUS website. So enter your query in the search term, or you can follow the link: https://www.Asus.com/ua/support/. On the site we select a product, in our case, it is “Laptops”.

Next, in the “Select a product” area, you need to specify the series and model of your laptop. When it appears the case, under the name click “Drivers and Utilities”.

On the Driver Tools tab, specify the processor model and the installed operating system. After that, a list of drivers will be displayed below.

We are interested in the “Others” and “Utilities” sections. Take a good look at what drivers are there and expand-read the descriptions for them. In the description you need to look for the words “Keyboard hotkeys” (keyboard hotkeys) or “specific functions” (specific functions).

As I did. In the “Utilities” section I saw the word “Keyboard” in the description for the “Armory Crate Service” driver (it is required to control the backlight). Also in the description I read that you need to install “ASUS System Control Interface V2”. To make all keyboard functions work normally.

In the section “Others” I found the driver “ASUS System Control Interface V2” and installed its latest version. Click “Download” to install the driver. Unpack the downloaded archive and run the “Install” file in it.

Your driver name may be different and it will depend on the laptop model, for example, it may be called “ATKPackage”.

All function keys in combination with Fn should now work. And this means that the backlight of the laptop keyboard, with the previously mentioned compositions, must be regulated.

Turn on the backlight

Let’s start with the SIMplest. Keyboard backlighting is controlled by keyboard shortcuts. You will not find any settings in the “Options” window. If, during the boot of the operating system, the buttons are highlighted in some color and then go out, then you need to figure out how to turn on the keyboard backlight on an ASUS laptop.

This is a combination of keys FnF3 and FnF4. Or Fn down arrow and Fn up arrow. The button itself should have an image of a keyboard with the sun. If the sun looks out by half. this is the brightness increase button, it looks out quite a bit. to decrease the backlight brightness.

Armory Crate Program

Before proceeding to download the program, you need to download a special service. To do this, open the official ASUS website, enter your laptop model and go to the list of drivers. “Driver Utility”.

Choose the processor model and the operating system that is installed on the laptop.

In the “Utilities” section, look for the “Armory Crate Service” driver (the latest version) and click on the “Download” button opposite it. For download. This is the keyboard backlight driver, or rather, it is this service that allows it to be controlled.

Look for the downloaded file in the Downloads folder on your computer. Select it and press the right mouse button. From the context menu select “Extract All.”.

Use the “Browse” button to specify where to extract the files from the archive, then click the “Extract” button.

Go to the unpacked folder and run the “ArmoryCrateSetup” application.

We mark with a marker the item “Repair.” and click “Finish”.

Your window may look different, and it will offer to install the service: just follow the instructions of the installation wizard.

When the installation is over, in the window that appears, click “Close”.

READ  How To See How Much Memory On A Laptop

In order for the service to start working, you need to restart the laptop. You can do it right away by clicking the “Yes” button. Or click “No”. Close all running applications and restart yourself.

After the service is installed, go to the “Start” menu and click on the shortcut “Microsoft Store”.

If you have NOT logged into your personal account, then log into it now by clicking on the little man at the top right.

If you have an account, you can create a Microsoft account according to this instruction.

Enter your username and password and wait for the login.

Then through the search bar, find the “Armory Crate” application. Click on the found result.

On the application page click the “Get” button.

You can view the download progress on the downloads tab Or click on the arrow at the top right.

The Armory Crate utility will install itself after downloading. You can find it in the “Start” menu in the list of applications.

After installing the desired service and the Armory Crate application, you can move on to the interesting thing. this is the keyboard backlight setting. To do this, click on the button with the keyboard and select “System”.

Next, open the “Backlight” tab. Choose any of the suggested effects and a suitable color.

Indicate the color in the colors of the circle, you can add it to a separate list and Save changes.

In the same window just below it is possible to change the brightness of the backlight using the slider.

How to enable, configure and control the keyboard backlight on your ASUS laptop

Now you will not surprise anyone with a laptop, but more recently one out of 10 people had it. They differ in manufacturers, appearance, characteristics. In general, choose what you want. And on expensive models or on gaming devices, you can very often encounter keyboard backlighting.

This is very convenient if you often have to work in the dark, and of course it is beautiful. So, if you have a backlit keyboard on an ASUS laptop and you don’t know what to do with it, let’s figure it out. I will try to explain as clearly as possible how to turn on the keyboard backlight, what to do if it does not work, and how you can change the color.

First you need to understand if this function is available on your device. You can open the official ASUS website, enter your model and see the specifications. Or take a closer look at the keys: the letters printed on them should be translucent. For example, I still have a separate indicator on the Caps Lock key, when the key is pressed, it glows red.

Aura Sync and TUF Aura Core

Another utility that can help you change the color of your keyboard backlight is Aura Sync or TUF Aura Core. Look at the sticker on your laptop. If there is a colored circle with the inscription ASUS AURA RGB. select the TUF Aura Core program, if the inscription ASUS AURA SYNC. then the Aura Sync utility.

TUF Aura Core can be downloaded from the Microsoft Store as described above. The utility is intended solely to control the keyboard backlight. You won’t find various additional features like in Armory Crate here.

So let’s take a closer look at Aura Sync. Write the name in the search and add “download” at the end. Next, to download the utility, select the official ASUS website.

Specify the version in the drop-down list, click on it, and the file download will start automatically.

Choose the most recent one. If after installation it will NOT work, then try downloading earlier versions.

Look for the downloaded file in the “Downloads” folder and Extract it from the archive.

Next, you need to install the “AuraSetup” application.

Then go to the “LightingService” folder and run the “AuraServiceSetup” file to install the required service.

After that, you can launch the Aura Sync utility by clicking on the shortcuts on the desktop. When the program interface opens, find the desired item and adjust everything so that the ASUS keyboard backlight is the color you need.

I think you managed to find a driver, and now you turn on and off the keyboard backlight on an ASUS laptop using hot keys. Also select a program so that you can change the backlight color. Just do not install several utilities at once, because they may begin to conflict with each other and will NOT work.

Sony and Lenovo

Sony also offers standard keyboard brightness options on some of its models. To see the settings, you need to open the VAIO Control Center and then click “Keyboard” and “Mouse”. “Keyboard Light”. Here you can configure the software to automatically turn diodes on or off based on ambient lighting. Like Dell, Sony also offers the ability to automatically turn off diodes after keyboard inactivity. To disable the feature, uncheck the box next to the Turn on backlight in low light conditions button. Here you can also configure the automatic mode and the time interval. 10 s, 30 s, 1 minute or “Do not turn off”. Lenovo does NOT open up new horizons for the use of diodes. Turning on the keyboard backlight on a Lenovo laptop is quite SIMple. using the Fn Spacebar key combination. That is, when you press FnSpace bar once, the driver turns on the backlight at medium brightness. Pressing Fn Space will increase the brightness. Pressing the hotkey again will turn off the keyboard backlight completely.

On the road at night or during a presentation in a dark room, the keyboard on a laptop can be difficult to see. To avoid this hassle, opt for the HP Pavilion models with under-keyboard backlighting that illuminates each button. The highlight character is usually displayed on the left side of the space. If this function is enabled, you will NOT have to turn on the light to type a letter or second text. Depending on the laptop model, the diodes can be activated in several ways:

  • Turn on the laptop and press the “F5” or “F12” key (depending on the model).
  • Look for the Fn key next to the Windows button on the lower left side of your keyboard. Press spacebar while holding Fn to turn on backlight.
  • Press the key light button, if your laptop model has one. A dedicated backlight button is marked with three dots in a horizontal line (found in dv6-2022er, dv6-3250us models worthy of dv6 series notebooks).

If none of the combinations worked, check the entire row of function keys. The desired key may be in a different location. If nothing happens, check your BIOS settings. To do this, select BIOS Setup or BIOS Setup Utility in the BIOS, and then use the arrow keys to navigate to the System Setup tab. Be sure to enable Action Keys Mode (set to Enabled) if it is disabled.

If the lighting is only on for a few seconds, a timeout setting in the BIOS may be required:

  • Restart your laptop and press F10 right away until BIOS opens.
  • Then use the arrow keys to navigate to the Advanced tab.
  • Go to Built-in Device Options and press Enter.
  • Here select the Backlight keyboard timeout.
  • Press the spacebar to open the settings, then select the desired delay.

If there is no such setting in the BIOS, the function is most likely not supported. detailed information can be obtained in the instruction manual or on the manufacturer’s website for the laptop model. To adjust the brightness (if your laptop supports this), press the function button two or three times in a row. If that doesn’t work, try pressing Fn together with the function key.

How to change the keyboard backlight color

Some laptop models are equipped with different colors. For example, the Dell Latitude 14 Rugged 5414. The Latitude Rugged series has a backlit keyboard that can be manually configured. The following colors are available:

Alternatively, the System Setup (BIOS) can configure the system to use the two additional colors installed. To turn diodes on / off or adjust brightness settings:

  • Press FnF10 to activate the switch (if Fn lock is on, the Fn key is not needed).
  • The first use of the previous combination of buttons turns on the lighting at minimum brightness.
  • Repeated pressing of the key combinations cyclically changes the brightness settings by 25, 50, 75 and 100 percent.
  • Try several options to choose the right one or completely turn off the light under the keyboard.

To change the color of the diodes:

  • Press FnC to view available colors.
  • By default, white, red, green and blue are active. System Setup (BIOS) can add up to two custom colors.

Backlit Keyboard Setup in System Setup (BIOS):

  • Turn off your laptop.
  • Turn it on and when the Dell logo appears, press the F2 key several times to open the System Setup menu.
  • From the System Setup menu, select RGB Keyboard Lighting. Here you can enable / disable standard colors (white, red, green and blue).
  • To set a custom RGB value, use the input fields on the right side of the screen.
  • Click “Apply Changes” and “Exit” to close “System Settings”.
READ  How To Password A Folder On A Laptop

To lock Fn, press FnEsc. The other auxiliary function keys at the top are unaffected and require the use of the Fn key. Press FnEsc again to disable the lock. Function keys will revert to default actions.

Most mid to high end laptops today offer a backlit keyboard. Backlit keyboards make it easy to type in low light conditions, especially for those who cannot type in touch. If you already have experience setting up keyboard backlighting on a laptop, share your impressions in the comments under this article.

The keyboard backlight on all laptops can be turned on and off using keyboard shortcuts. For example, to enable it on Lenovo ThinkPad T series, you need to use the Fn spacebar. Many laptop users often ask if Windows 10 has a dedicated setting for adjusting brightness. The answer is yes and no.

Adjusting the backlight color on a laptop keyboard.

Shutdown

When it comes to saving battery, one of the most effective methods is to turn off your device’s keyboard backlight. This feature is a huge advantage for all portable gadgets. But, unfortunately, not all laptop models support it. Consider turning off the lights using the example of Microsoft Surface Pro. Surface Pro has a built-in sensor that activates a diode underneath the buttons to make them stand out better. If Surface is plugged into a wall outlet, there will be NO power consumption issues. But if it is running on battery power, activating the diodes will speed up battery discharge several times.!

Other useful settings for saving battery power:

  • Removal of peripherals, mouse and keyboard (20%.30% more battery life per charge).
  • Decrease display brightness by up to 50% (16% longer battery life).

The lighting is automatically switched on and off using a built-in sensor. There are also manual controls for options, but older versions of the Surface keyboard might not. The first two keys next to Esc are the function keys F1 and F2, which control the lighting on the device. If you just click on them, nothing will happen. precisely, pressing F1 or F2 will NOT change the brightness of the backlight or turn it off / on. To access the special features of the Surface keyboard, hold down Alt:

  • Increase brightness. AltF2.
  • Decrease brightness. AltF1.

If you want to squeeze the maximum battery life out of Surface, you will have to give up these “goodies”. Of course, in some situations, for example, in the dark, the backlight is SIMply necessary, so the manufacturer has provided an increase or decrease in brightness.

How to turn on keyboard backlight on windows 10

The keyboard backlight on all laptops can be turned on and off using keyboard shortcuts. For example, to enable it on Lenovo ThinkPad T series, you need to use the Fn spacebar. Many laptop users often ask if Windows 10 has a dedicated setting for adjusting brightness. The answer is yes and no.

Adjusting the backlight color on a laptop keyboard.

How to change the keyboard backlight color

Some laptop models are equipped with different colors. For example, the Dell Latitude 14 Rugged 5414. The Latitude Rugged series has a backlit keyboard that can be manually configured. The following colors are available:

Alternatively, the System Setup (BIOS) can configure the system to use the two additional colors installed. To turn diodes on / off or adjust brightness settings:

  • Press FnF10 to activate the switch (if Fn lock is on, the Fn key is not needed).
  • The first use of the previous combination of buttons turns on the lighting at minimum brightness.
  • Repeated pressing of the key combinations cyclically changes the brightness settings by 25, 50, 75 and 100 percent.
  • Try several options to choose the right one or completely turn off the light under the keyboard.

To change the color of the diodes:

  • Press FnC to view available colors.
  • By default, white, red, green and blue are active. System Setup (BIOS) can add up to two custom colors.

Backlit Keyboard Setup in System Setup (BIOS):

  • Turn off your laptop.
  • Turn it on and when the Dell logo appears, press the F2 key several times to open the System Setup menu.
  • From the System Setup menu, select RGB Keyboard Lighting. Here you can enable / disable standard colors (white, red, green and blue).
  • To set a custom RGB value, use the input fields on the right side of the screen.
  • Click “Apply Changes” and “Exit” to close “System Settings”.

To lock Fn, press FnEsc. The other auxiliary function keys at the top are unaffected and require the use of the Fn key. Press FnEsc again to disable the lock. Function keys will revert to default actions.

Most mid to high end laptops today offer a backlit keyboard. Backlit keyboards make it easy to type in low light conditions, especially for those who cannot type in touch. If you already have experience setting up keyboard backlighting on a laptop, share your impressions in the comments under this article.

Share your experience!

Is there a keyboard backlight in a laptop

But not all laptops have backlit keyboards. To check if your laptop has a backlit keyboard, go to the support page on the developer’s website or use the instructions for the device. Find the correct model and its parameters, and then check the specifications of your laptop. You can also determine the presence of such a possibility visually. carefully study the additional function keys on the device. Usually they are marked with symbols of the second color on the F1-F12 buttons or on the arrow. In most cases, you must also hold down the Fn (Function) button, if available, to use additional hotkey functions.

Sony and Lenovo

Sony also offers standard keyboard brightness options on some of its models. To see the settings, you need to open the VAIO Control Center and then click “Keyboard” and “Mouse”. “Keyboard Light”. Here you can configure the software to automatically turn diodes on or off based on ambient lighting. Like Dell, Sony also offers the ability to automatically turn off diodes after keyboard inactivity. To disable the feature, uncheck the box next to the Turn on backlight in low light conditions button. Here you can also configure the automatic mode and the time interval. 10 s, 30 s, 1 minute or “Do not turn off”. Lenovo does NOT open up new horizons for the use of diodes. Turning on the keyboard backlight on a Lenovo laptop is quite SIMple. using the Fn Spacebar key combination. That is, when you press FnSpace bar once, the driver turns on the backlight at medium brightness. Pressing Fn Space will increase the brightness. Pressing the hotkey again will turn off the keyboard backlight completely.

On the road at night or during a presentation in a dark room, the keyboard on a laptop can be difficult to see. To avoid this hassle, opt for the HP Pavilion models with under-keyboard backlighting that illuminates each button. The highlight character is usually displayed on the left side of the space. If this function is enabled, you will NOT have to turn on the light to type a letter or second text. Depending on the laptop model, the diodes can be activated in several ways:

  • Turn on the laptop and press the “F5” or “F12” key (depending on the model).
  • Look for the Fn key next to the Windows button on the lower left side of your keyboard. Press spacebar while holding Fn to turn on backlight.
  • Press the key light button, if your laptop model has one. A dedicated backlight button is marked with three dots in a horizontal line (found in dv6-2022er, dv6-3250us models worthy of dv6 series notebooks).

If none of the combinations worked, check the entire row of function keys. The desired key may be in a different location. If nothing happens, check your BIOS settings. To do this, select BIOS Setup or BIOS Setup Utility in the BIOS, and then use the arrow keys to navigate to the System Setup tab. Be sure to enable Action Keys Mode (set to Enabled) if it is disabled.

If the lighting is only on for a few seconds, a timeout setting in the BIOS may be required:

  • Restart your laptop and press F10 right away until BIOS opens.
  • Then use the arrow keys to navigate to the Advanced tab.
  • Go to Built-in Device Options and press Enter.
  • Here select the Backlight keyboard timeout.
  • Press the spacebar to open the settings, then select the desired delay.

If there is no such setting in the BIOS, the function is most likely not supported. detailed information can be obtained in the instruction manual or on the manufacturer’s website for the laptop model. To adjust the brightness (if your laptop supports this), press the function button two or three times in a row. If that doesn’t work, try pressing Fn together with the function key.

READ  How To Change Password On Laptop

Asus and Acer

Turning on the backlight on an Asus laptop is done in a couple of clicks. To start:

  • Make sure the feature is enabled in BIOS.
  • Make sure you update your drivers (enter your model number and install the keyboard driver).

When the light sensor is active, ASUS button diodes will automatically turn on / off the LED according to the environment. For manual adjustment, most Asus laptops use FnF4 (to turn on the backlight and increase its brightness) and FnF3 (to reduce the brightness and turn off the diodes completely). If your Acer laptop keyboard lighting does not work, use the FnF9 key combination, or the dedicated keyboard backlight button located on the left.

Is there a keyboard backlight in a laptop

But not all laptops have a backlit keyboard. To check if your laptop has a backlit keyboard, go to the support page on the developer’s website or use the instructions for the device. Find the model you need and its options, and then check the specifications for your laptop. You can also determine the presence of such a possibility visually. carefully study the additional function keys on the device. Usually they are marked with symbols of the second color on the F1-F12 buttons or on the arrow. In most cases, you must also hold down the Fn (Function) button, if available, to use additional hotkey functions.

How to turn on keyboard backlight on asus vivobook laptop

You, many users of asus vivobook 15 / s15 asus vivobook 14 asus vivobook 17 x420f, x420fa eb075t, 15 x512dk, x412da, x705ub bx097t. Faced the problem of keyboard backlight inoperability.

There may be several reasons why the ASUS laptop keyboard backlight does not work, but the main one you SIMply did not turn it on.

Let’s first briefly analyze how to turn on the backlight of the keyboard keys in asus vivobook, and only then why it does not turn on.

It turns on depending on the model. It can be pressing the Fn F4 key at the same time, and the constant will help you increase the brightness of the lighting.

Continuously pressing the Fn F3 keys will help you reduce the brightness and eventually turn off the backlight.

That’s not all. On some models, these options are available with the combination of Fn and the arrow keys.

Another option is the F7 key. On many, the button is SIMply drawn with a keyboard and the light is on. this button is responsible for the backlight, so take a closer look at the key drawings.

How to control keyboard backlight in asus vivobook

You can easily control the key illumination on your laptop and customize the colors as you wish.

You can also set different lighting effects, so don’t miss this opportunity.

To do this, you need to install the “Armory crate” software. this is an assembly from ASUS that has many features, including Turbo Mode, Hyperfan Mode, Highlights, Aura, GPU overclocking, etc.

Download Armory crate from the original ASUS site (you can also download it from second sources), although my personal recommendation is to download it from the original site.

Once Armory Crate has loaded, navigate to the game console icon on the left. Click on System. In the system, you will see three options. Click on “Backlight”. Scroll down a bit and there you will see “Customize”.

After clicking on the settings button, you will see a pop-up message. Press OK and your keyboard will be out of sync with AURA and turn off the lights.

Now on the right side you will see a box labeled EDIT BUTTON TO ADJUST AURA. Click and can adjust keyboard lighting.

The second reason why it does not work is the lack of proper ATK drivers. ATK. Assigns functions to various keys, such as changing the screen brightness, turning on the wireless network, switching between the monitor and an external source, and turning on the keyboard backlight.

To install the correct ATK drivers, you need to download them from the ASUS service. Another way is to turn off the laptop.

To do this, turn it off completely. Remove the connected cables to let it rest. Now wait 2-3 minutes. After that, plug everything back in and check if your problem is solved or not.

Having a cool laptop like vivobook 15 / s15 asus vivobook 14 asus vivobook 17 x420f, x420fa eb075t, 15 x512dk, x412da, x705ub bx097t. Faced with the problem of keyboard backlight inoperability, it’s like living in heaven.

Due to some minor issues only, if the laptop’s backlight stays inactive it is a complete disappointment.

You can try the fixes listed below in the table that I have provided to fix this problem, but nevertheless, if you do NOT see any changes, it is most likely that your laptop does not support any functions or perhaps something with it. it is not so.

How to turn on the keyboard backlight on an Asus laptop?

There are basic functions in laptops, there are additional important and not very important ones. Sometimes we chase the name of the brand and do not quite give ourselves an account of whether we will really use all this. However, the keyboard backlight will become a necessary addition for both business people and ordinary people. This time we will try to figure out how to turn on the keyboard backlight on ASUS.

How To Turn On The Backlight On Acer Laptop

How to turn on the keyboard backlight on an ASUS laptop?

We will move towards the answer to this question by a method from SIMple to complex. So, how to turn on the backlight of the Asus keyboard:

  • On the layout you will find the Fn key, which is completely inconspicuous at first glance. Only advanced users know about all its abilities. It belongs to the auxiliary, it should be combined with others to obtain one or another effect. In the question of how to turn on the keyboard backlight on an Asus laptop, it may well be the final answer. It is likely that the purchased technique Plasma mode pressing this key without additional. But not all models activate the backlight in this way, and further information may well become relevant to you.
  • You can turn on the keyboard backlight on an ASUS laptop with a key combination, since in this way various additional functions of laptops are often activated. Now we will use the already familiar Fn with other keys. It will almost certainly be a key from the top row from F1 to F12. First, we study the icons or images on the keys of this row. If you have NOT sewed anything SIMilar to the keyboard image, you will have to follow the selection method. Press each key from the row one by one while holding Fn. It is there that the sound and screen control buttons are always located, therefore, the backlight will almost certainly be in this area.
  • Before you turn on the backlight of the Asus keyboard, look for the desired icon among the other buttons on the keyboard. In modern models, new types of combinations often use directions for the SIMplest settings. For example, these can be buttons up and down, right and left. When looking for a picture key or trying to tandem with direction keys, don’t forget the Fn clips.
  • Sometimes, in order to turn on the keyboard backlight on an Asus laptop, you need to look hard. The answer may be in the most conspicuous place. For example, there is a possibility that the backlight is activated by pressing the Fn key and the spacebar. Sometimes you need a more complex combination, when you need to additionally press F5 to the first key. In a word, you have to really break your head to get the result.

How to turn on keyboard backlight on ASUS from outside?

When you have already tried all the possible options and did not get the result, most likely your technique does not support the backlight mode. But even in such a situation, one should not lose heart. There is always a place for savvy and additional gadgets.

You can even turn on the backlight on equipment where it was not originally provided. LEDs work wonders, they need a little help and a separate USB input. Typically, for full keyboard lighting, you need about five.

The calculation is carried out as follows: the power supply of the LED is about 3.5 V, while the power of 5 V is supplied to the connector itself. This means that a resistor of one and a half volts will also be needed. For a person with basic knowledge in this area, it will NOT be difficult to build a backlight and activate it. If for you such undertakings seem fantastic, you can always contact a specialist who will easily solve your problem.