How to turn on sound on Samsung phone

For this you need:

  • Open System Preferences.
  • Select the “Applications” tab from the list.
  • Select the “Application Manager” section.
  • Swipe from right to left to open a list of running processes.
  • Find the sound service in the list of running applications and check its status. If necessary, you need to activate this process.

If for some reason the service does not turn on, then first do a factory reset. It is best to do it through the system settings menu, but you can also use the factory option. for this you need to go into Recovery mode and select the backup and reset item.

Loop wear

turn, sound, samsung, phone

If in your smartphone the volume control button or the sound device is placed in an atypical place (for example, on the back cover), then the problem in the loss of sound may be in the loop that powers this module.

Now you can hardly find smartphones in a slider or clamshell form factor, and those who used phones a few years ago may remember such devices. Nevertheless, some manufacturers and with the Android operating system often use similar form factors.

Due to regular movement, the contacts of the loop are frayed and operability can be restored only by replacing the conductor with a new one. It is almost impossible to restore the train at home.

It is possible to determine that the problem is in the loop by one sign. the sound disappears and you cannot regulate it. Manufacturers promise to return to outdated form factors, so soon the problem of regular replacement of such conductors will be relevant again.

Thus, if you have lost sound on the device, you must first check the settings of the gadget, and only then contact the service center. If you unsuccessfully flashed the device and are not sure that you can install the correct software yourself, you should also contact the specialists. In most cases, they will recommend that you install a standard (custom) firmware.

Now you know all the causes and remedies for audio problems on Android smartphones. You can share your problems and their solutions in the comments. Share the information received with your friends, invite them to participate in the discussion.

Missing sound on Android phone what to do. Android smartphones, like any other technology, are prone to breakdowns. If you have lost sound on Android, you should not immediately take the device to a service center, because in many cases you can solve this problem yourself.

Volume level at minimum value

Incorrect volume setting is the most common reason for no sound on a call

To fix the problem, press the volume up button and move the slider to the right to the maximum value. Make sure that the level of the other signals is also normal. Click the icon to the right of the slider. The volume levels of all signals (ringtone, media and alarm) will open. If there is no icon, then go to the phone settings in the “Sound” section and increase the volume of each of the signals.

Speaker failure

Replacing the speaker on budget models can cost an average of 1000 rubles

If there is no sound in all programs and applications, not just when there is an incoming call, try connecting headphones. If sound appears in them, it means that the speaker is most likely damaged. To replace it, it is better to contact the service center.

Broken speaker

If the phone works through a plug-in headset or only on speakerphone, but at the same time you cannot hear the interlocutor, then the problem most likely lies in the speaker. Perfect smartphones have several speakers. some provide sound while listening to music or speakerphone, while others make it possible to hear the interlocutor in a simple telephone conversation. Most often, the main speaker fails. The reasons may be as follows:

  • Clogged moving diaphragm. At maximum volume, you can hear a quiet sound. The sound almost never completely disappears. For this option, you can try cleaning the speaker yourself using a soft brush and a cotton swab. This tip is only suitable if you have access to this module, for example, the speaker is located openly under the removable cover of your smartphone.
  • Burnout or short circuit of the speaker coil. At the time of sound reproduction, a slight crackling sound will be heard. this is the main symptom of this malfunction. At the same time, you can hear the interlocutor or the playing media file. You can get rid of the problem only by replacing the speaker together with the coil.
  • Breakage of the coil winding. in this case, the sound of the speaker disappears completely. This can only be corrected by replacing a failed spare part.

If you have lost the sound of the speaker on your phone, then most likely you will have to contact the wizard. Before contacting a service center, test the operation of the speakers in different modes. Try to describe how the speakers work as accurately as possible. This will allow you to pinpoint the problem so that the technician doesn’t have to look for it for a long time.

Incorrect firmware version or failed update

To return to factory settings, in the off state, simultaneously press the power button and the volume up button, then select Hard Reset

If the sound disappeared after flashing or updating the phone, then the problem may be that the service responsible for the sound is turned off:

  • Go to Settings and open the Applications tab and Application Manager.
  • Among the running applications and processes, find the sound service, open it and enable it if necessary.

A more difficult case is when a new firmware or update lacks the necessary drivers for your phone’s speaker. Then you will need to roll back the firmware or reset the system to factory settings. This will delete data from the phone memory, so it is recommended to back up your data first.

To return to the previous firmware, you need to download it from the Internet, and then reflash the phone again.

It’s easier to factory reset your phone and Android version. To do this, go to “Settings” and select the “Restore and reset” section. All data from the internal memory will be deleted (but not from the memory card), and you will receive the phone in the same condition as when you bought it. Then, from the previously created backup copy, move all the information to the phone, and all data will be restored.

Android software glitch

The sound may also disappear when a glitch occurs in the software. You can try to fix it by restarting your phone.

It is also recommended to turn off the phone, remove the battery and wait 1-2 minutes. Then put it back in and turn on the phone.

How to enable ringtone sound for SMS notifications on smartphone

In smartphones, as a rule, there are no modes, there is simply a parameter that turns off the speaker.

Usually there are three positions, the voice is off, but vibration is on, everything is off and everything is on.

You can change these parameters in the settings, but it’s easier and faster to pull the top of the screen down. pull twice. more settings will open (sometimes you need to scroll to the right).

To turn on the sound in the smartphone, just click on the “speaker” icon and select it to be blue and not crossed out. in this way you can quickly use the ringtone sound and the sound of SMS notifications.

A quick way to turn on sound on an Android phone

If your Android phone Samsung, Philips xenium, but KIA lumiya, Honor, fly, texet, bq, fly, ASUS, Xiaomi, Meizu, Redmi, Alcatel, zte, micromax, LG, prestige, gigaset there is no sound, then maybe it is just turned off.

Then the sound needs to be turned on and all the cases. I will not touch on the questions of how to fix sound problems here, you can find out about it here.

In this post, I will only show you how to turn on sound with built-in parameters in a smartphone or push-button phone.

This will affect youtube, skype, vibeer, call, SMS notifications, alarm clock, keys, and other functions.

How to turn on sound on an Android phone on Viber and Skype

Viber and Skype have their own settings, but I will not describe both applications. there is a lot in common. I will describe only for the vibe.

After starting, we move to the settings. We see the item “Notifications”. We jump there and see what we need.

You don’t need to do anything special, just put the birds in the appropriate places.

Everyone will make this choice himself. In addition to voice, you can connect vibration and change the sound of the call to your own melody.

How to turn on the sound on a push-button telephone

On the push-button phones Samsung, Philips, Alcatel and others there is a “silent” mode. To turn on the sound, you just need to change this mode, for example, to “on the street”.

This is usually done the same way: “settings”. “Modes”, although it is quite possible that someone will have a different.

READ  How to enable te 9 on Samsung

If this method on the push-button telephone did not turn on the voice, then the problem is most often in the socket where the headphones are connected.

If you do not use them, then it is possible that it is time to change the speaker. This is not uncommon in push-button telephones.

How to turn on the alarm sound on a cell phone

The built-in alarm clock does not have its own settings. it obeys general settings (see the section above).

On the built-in, you can only change the melody, assign a name to the signal, enable or disable repeat after 5 minutes, enable vibration and sound time.

If you use third-party applications, then they may have their own option to disable and enable the voice.

Only there are a lot of such applications and everyone has their own settings, so I will not touch on this topic here.

How to turn on sound on your Android phone on YouTube

By default, the sound in YouTube is always turned on, but if you accidentally turned it off or someone did it for you, then it’s easy to fix.

Then you will notice below that the speaker is crossed out. Click on it, that the line is gone and the voice will immediately appear.

Of course, the reasons may be completely different and the methods I described here will not help you in any way.

I just gave the basic, built-in settings on an Android phone (pictures are taken on Android 7). Success.

Increase the sound in a Samsung smartphone with the Speaker Booster app

This works in a different way. Instead of amplifying the sound, the Speaker Booster changes the equalizer settings, which leads to an increase in sound by about 15-30%.

Using the program is quite simple. run and install the required sound, and then click “Boost”.

After that, wait until the settings are completed, and everything is ready. the sound should be louder.

In both cases, I cannot guarantee you a 100% result. Much depends on android, ROM and hardware.

However, if your speakers are too quiet, you might want to try experimenting with your phone’s volume.

2 Ways to Really Increase Sound Volume on Samsung Galaxy

Depending on your phone Samsung duos a3, a5 2017, j5, j7 2016, s8, j1 2016, j4, j2, j3 2016, a7, a8 2018, j6, s9, c8, s8, g6, c5, j8, j4, a6, s7, s6, s3, s4 mini, a7 2018, gt e2121b, gt e2121b, sm g318h, gt e1182, e1150, g530h, x 700 speaker can sound soft or loud.

As a rule, the sound is usually quiet for us, and it is hard to hear on your smartphone. How to make the speaker louder?

Immediately you should pay your attention to the engineering menu. Samsung Galaxy lacks a full engineering menu.

There are some separate functions, but through the codes, for example, I could not turn up the volume of the speakers.

Who could. share. I have chosen other methods. I will not say that we managed to amplify the dynamics by 100%, but the effect is noticeable.

The first thing I did was to tackle the applications. On the Play market, many of them promise to add volume.

Only during the test it turned out that not all work the way I wanted, and some are compatible only with some phones and Android versions.

Samsung limits the volume of speakers and headphones, but if you wish, the restrictions can be removed. see how to do this here.

Boost the sound on a Samsung smartphone with the Speaker Boost app

If you have Android 4.1.2 or higher, you can use the pretty good Speaker Boost app.

It will turn out like a slider for adjusting the sound of the speakers from any point. After launching, you will need confirmation.

There is a certain limiter in the program that will not allow you to amplify the sound above 60 percent.

I do not advise you to take risks, but your business. those who wish, who are not afraid, can experiment with different values.

To amplify the sound, move the Boost panel to the right. First, choose a factor of 20% (this is just my recommendation), and then you can gradually increase, focusing on the dynamics.

If you cannot use the application above, I recommend trying another.

How to adjust the audio volume control on a Samsung Galaxy phone

Does the sound of your Samsung smartphone not suit you? You want to fine-tune the volume, but you cannot?

You can easily improve accuracy. By default, this is no more than 15 levels, but there is a solution that increases the accuracy of loudness.

The Precise Volume program will help with this, where the sound volume can be adjusted in the range from 1 to 100.

Want to make the volume 100? No problem. Run the application and click the line (button) “Additional settings”.

It’s only a good idea to tweak the settings first, while waiting for a more detailed sound level adjustment. In options, select the two fields at the top.

  • Split Ringer / Notification / System
  • Accurate ringer volume

Now go back to the main Precise Volume screen and click the Show button below the volume slider to open and show all possible sliders.

Now you have 6 sliders, each of which is responsible for a different element.

  • Media. is responsible for the volume of media, that is, music, films, etc.
  • Call. responsible for the sound of the call.
  • Notifications. responsible for the volume of notifications.
  • Systems. responsible for the sound of system sounds (for example, when you touch the screen).
  • Conversation. responsible for the conversation.
  • Alarm clock. controls the volume of alarm sounds.

The slider can be adjusted on a scale of 1 to 100 for extremely precise volume control on your phone.

Unfortunately, the disadvantage of the app is that the precise audio adaptation is only valid in the Precise Volume app. this does not directly affect the system volume slider.

This means that every time you want to fine-tune the volume, you must launch the Precise Volume application and do it there. However, there is a way to make it easier

Configure volume profiles in Precise Volume. The application allows you to create so-called presets, that is, ready-made sets of volume settings. You can create popular profiles

  • Loudly.
  • Quiet.
  • Music.

For each of these sets, you can adjust the volume of each slider, and then you can switch between sets with two clicks on the Samsung home screen.

As a result, it replaces the need to use the system volume slider and allows you to quickly change settings without launching the Precise Volume application. How to do it?

First go to the Precise Volume app and under the Preset Volume click Edit. A list of all profiles will appear. Click the first sample set “Sample Preset”.

At the top, change the name (eg Loud) and then click the Add Volumes button to add more volume sliders for that setting.

Select all the volume sliders and then adjust the volume of each item for the Loud profile. Save changes using the button with the floppy disk icon in the upper right corner.

You will return to the edit settings screen. Click the plus sign in the lower right corner to add a new preset. This can be called “Mute” and, for example, set all volume levels to 0%.

At the very end, you can add a music kit that you will use when listening to music.

Set it according to your preference. You can also create other presets and then switch between them. Well how to do it right?

You can use the widget on the home screen to switch between the created profiles.

Hold your finger on the Android home screen to display options for adding widgets. Add a widget named “Activate Preset”.

The speaker icon will now appear on the home screen. When you touch it, you can immediately switch between the selected profiles.

This way, you can set presets for every occasion, assign them precise volume levels, and then quickly switch between them. Success.

How to set up sound on a Samsung phone

Wondering how to increase volume on Android Samsung? Although the phones of this brand are distinguished by relatively loud speakers, audio or video files do not always have sufficient sound quality for full playback on them. There are several ways to increase the level of the built-in speakers using deep settings or third-party applications.

How to make it quieter

To make the phone quieter, just press the bottom button on the rocker. You can also lower the level on the special scales in the settings menu as described above. Android also has predefined modes that let you automatically adjust the sound. For example, if you want not just to reduce the noise level, but to completely remove it, select the “Do not disturb” mode. And if you want, on the contrary, to hear a call or a message signal on the street, select the appropriate item.

Setting up sound on your Samsung phone

Use the standard volume rocker to debug audio on your device. This is the name of the buttons located on the side of the case, above the power button. By pressing the button down, you can make it quieter, up. accordingly, louder.

READ  How to turn off Okko subscription on iPhone

On the latest versions of Android, when you press the sound buttons, not one scale appears, but several. Using the touch screen, you can separately adjust the speaker volume during conversations, multimedia playback, system and program notifications. Just slide your finger on the desired scale.

How to make the speaker louder

Not all android users know that the speaker volume frames installed in the system are conditional. In fact, its capabilities are much greater, however, in order to avoid unnecessary load and breakdown, the developers lay not the maximum value, but 20-30% less.

You can adjust the maximum level through the developer menu. To get into it, on most devices, it is enough to type the command ###, in the list that appears, select the Hardware Testing item, then Audio.

A screen will open with 2 items. Normal Mode and Headset Mode. Going into the first one, you will debug the sound through the main speaker, the second section allows you to edit the volume in the headphones.

When you open the section, you will see the Type parameter. Click on it and select Media. In the Level line, set Level 0. In the upper and lower values, set new numbers, the maximum value is 255.

Save your settings and restart your phone. Speaker settings can be changed, not only during music playback, but also during calls, program and system signals.

Adjusting the microphone volume through the engineering menu | Androidlime

Another useful and simple instruction for those who are hard to hear when talking on the phone.

It often happens that the volume of the spoken speaker of the microphone is not enough. the interlocutor does not hear you well due to his malfunctioning. Do not rush to speak twice as loud or send the device to a service center for repair. To start, during a call, press the volume up button several times in a row. If it doesn’t help, read our instructions.

If the smartphone runs on a MediaTek processor (this is the main condition), you can configure the microphone through a special section hidden from ordinary users. the engineering menu. You can read his full review here. and the login instructions are here. In short, you need to enter the command code (### or ### or #) or download the MTK Settings application.

Next, with a swipe to the right, go to the Hardware Testing section, select the Audio item, then. Normal Mode.

In the Type section, select Mic. this is the microphone settings.

Now you need to select the volume levels and the corresponding value for each. There are 15 levels in the engineering menu (from 0 to 14), but in most cases smartphones use the first 6 levels. Anyway, the highest default is 192.

It needs to be changed to a higher value in the range of up to 255. We do not recommend choosing the maximum characteristics right away. experiment with increasing the indicator by 20-30 units. After entering the changes, press the Set button, which will save the changes.

When talking on the phone, do not forget to set the volume rocker to maximum.

At the moment, this is the only normal way to increase the volume and sensitivity of the microphone on the phone. If the described tips do not help, you will have to take the smartphone for diagnostics and repair.

Equalizer setting honor purity

To adjust the equalizer yourself, you need to connect wired headphones and follow these steps:

  • Go to phone settings.
  • Select the item “Sound”.
  • Next, the item “Audio Effects Huawei Histen”.
  • Turn off 3D audio and select “Equalizer”.
  • Click “Configure” in the main window and in the additional.
  • Adjust 10 EQ bands by moving the circles up or down.
  • Add boosted bass if needed.
  • Save settings by clicking on the three dots in the upper right corner and selecting “Save”.
  • Assign a name by typing it in the appropriate window and clicking the “Save” button.
  • After the done actions, the mode will be added to the rest.

Similarly, you can adjust the sound on the Honor 10 Lite.

How to turn off noise cancellation through a third-party program

The most common program is QuickShortcutMaker. After downloading and installing it, we find the “Actions” section, where you need to enter “Other settings”. The phone should appear on the screen, where the “Other settings” subsection is again selected, and in it we go to the “View” tab. Sound correction function is available here.

How to turn on the microphone on the phone

There are many reasons for the loss of performance, they are hardware or software in nature. Moisture can enter the inside of the device and cause the microphone to stop functioning. Mechanical damage is possible. There are blockages of the hole and unsuccessful attempts to eliminate them with the help of toothpicks, pins, this effect damages the microphone.

Smartphone after impact

After mechanical damage, the smartphone may also stop working normally. If the blow was strong, then the track in the middle of the board, which is responsible for the sound, could break, in this case the part must be changed to a new one.

The microcircuit inside the mobile device may also be damaged. To eliminate the malfunction, it is necessary to find out the exact cause of the breakdown. The specialists in the service center can determine the damaged area of ​​the microcircuit, they will also repair the mobile phone.

Setting up the main speaker

  • main;
  • without sound;
  • vibration mode.

Setting the main mode is reduced to adjusting the volume level of the melody being played. In this case, either the side buttons of the phone or its system settings are used. In the first case, the setting is quite simple: the upper button increases the volume, the lower one decreases.

When choosing the second method, a more extensive setting becomes available.

In the system settings of the smartphone, you can adjust the volume of the melody, multimedia and alarm clock. To do this, go to the phone settings and select the “Sound” item. Next, by dragging the sliders, set the desired volume level for each item.

How to change the alarm ringtone

You can change the alarm melody when creating or editing it. To do this, you need to open it and select the “Signal sound” item. It is worth noting that both system records and songs downloaded to the phone can be used as a melody.

Software glitch

After carrying out certain actions on the phone, a failure occurs, which leads to a violation of its performance. For instance:

  • the user has downloaded the software that has uploaded the virus software to the gadget;
  • unofficial firmware is installed on the smartphone;
  • incompatible applications are present.

To troubleshoot a software failure, it is recommended that you do the following first:

  • Find the “Application Manager” tab in the device parameters and click on it.
  • A list of processes that are currently running on the mobile will open. Here the user should be interested in the services that are responsible for the presence of sound on the device. They will need to be checked for performance.
  • If necessary, the service can be activated by clicking on it.

What to do if sound doesn’t work in Android apps

If the ringtone does not work with an incoming call on Android, then it is recommended to follow simple recommendations that are likely to resume a telephone conversation with the subscriber. They will be discussed further.

Modes to Improve Headphone Sound on Android Phones

Broken loop

A loop in a smartphone is a device that connects the central board of the device with its remote elements. We are talking about speakers, camera, keyboard, connectors, etc. If there is no sound during an incoming call on Android, this may indicate a broken cable.

The loop may fail under the following circumstances:

  • the smartphone has been subjected to serious mechanical stress. This can happen when the gadget falls;
  • water has entered the phone;
  • severe overheating of the device.

Note! With slight damage to the loop, a floating effect will be observed on the smartphone. This is especially noticeable on phones Alcatel, ASUS, as well as Samsung.

Speaker or audio jack malfunction

The speaker on a smartphone may break if the unit is immersed in water or if mishandled.

Important! If none of the methods helped to return the sound to the gadget, then it should be taken to the service center for a complete diagnosis.

It is not recommended to change the speaker on Android smartphones by yourself. It is better to entrust this task to professionals.

If the user, after connecting the headphones, does not observe sound effects on the device, then the problem is most likely in the audio jack. This is also evidenced by the absence of a headset icon in the status bar of the gadget.

Speaker appearance on Android phones

In this situation, you should not take measures on your own to inspect and repair the connector. Many people try to dust the audio interface using third-party items. This is not recommended in order to avoid unpleasant consequences.

READ  Samsung Galaxy A 50 as a camera

Missing sound on Android phone: what to do

Android phones become silent for several reasons, each of which requires special attention. The following will consider the most common of them.

Setting up sound profiles on the Android operating system

Missing sound on Android phone. what to do

Sound drops out on some phones with Android operating system. over, sound effects can disappear completely or partially. This circumstance has several reasons for its occurrence. How to enable sound on Android will be discussed in this article.

The main signs of no sound on Android

A smartphone user on OS Android will be able to understand about the absence of sound on his device due to the following circumstances:

  • the volume cannot be adjusted. When you press the button responsible for increasing and decreasing the sound on the phone, nothing happens. This means that the gadget has stopped responding to user actions aimed at changing the volume;
  • the device is completely silent. That is, the user cannot hear the sound when watching videos on the Internet, making calls, sending messages, appearing notifications, etc.;
  • the mobile phone spontaneously reduces the sound to a minimum. This happens when the user increases the volume on the device by pressing the corresponding button, but the sound is immediately reduced;
  • inability to turn off the “Silent” mode.

Volume control in phone settings on OS Android

Note! When the above signs appear, you should first identify the cause of their occurrence, and then take measures to eliminate them.

Samsung push button how to turn on the sound

If your Android phone Samsung, Philips xenium, but KIA lumiya, Honor, fly, texet, bq, fly, ASUS, Xiaomi, Meizu, Redmi, Alcatel, zte, micromax, LG, prestige, gigaset there is no sound, then maybe it is just turned off.

Then the sound needs to be turned on and all the cases. I will not touch on the questions of how to fix sound problems here, you can find out about it here.

In this post, I will only show you how to turn on sound with built-in parameters in a smartphone or push-button phone.

This will affect youtube, skype, vibeer, call, SMS notifications, alarm clock, keys, and other functions.

How to turn on sound on your Android phone on YouTube

By default, the sound in YouTube is always turned on, but if you accidentally turned it off or someone did it for you, then it’s easy to fix.

Then you will notice below that the speaker is crossed out. Click on it, that the line is gone and the voice will immediately appear.

Of course, the reasons may be completely different and the methods I described here will not help you in any way.

Secret Hidden Audio Mod For Your Samsung Galaxy

I just gave the basic, built-in settings on an Android phone (pictures are taken on Android 7). Success.

How to turn on sound on an Android phone on Viber and Skype

Viber and Skype have their own settings, but I will not describe both applications. there is a lot in common. I will describe only for the vibe.

After starting, we move to the settings. We see the item “Notifications”. We jump there and see what we need.

You don’t need to do anything special, just put the birds in the appropriate places.

Everyone will make this choice himself. In addition to voice, you can connect vibration and change the sound of the call to your own melody.

How to enable ringtone sound for SMS notifications on smartphone

In smartphones, as a rule, there are no modes, there is simply a parameter that turns off the speaker.

Usually there are three positions, the voice is off, but vibration is on, everything is off and everything is on.

You can change these parameters in the settings, but it’s easier and faster to pull the top of the screen down. pull twice. more settings will open (sometimes you need to scroll to the right).

To turn on the sound in the smartphone, just click on the “speaker” icon and select it to be blue and not crossed out. in this way you can quickly use the ringtone sound and the sound of SMS notifications.

How to turn on the alarm sound on a cell phone

The built-in alarm clock does not have its own settings. it obeys general settings (see the section above).

On the built-in, you can only change the melody, assign a name to the signal, enable or disable repeat after 5 minutes, enable vibration and sound time.

If you use third-party applications, then they may have their own option to disable and enable the voice.

Only there are a lot of such applications and everyone has their own settings, so I will not touch on this topic here.

How to turn on the sound on a push-button telephone

On the push-button phones Samsung, Philips, Alcatel and others there is a “silent” mode. To turn on the sound, you just need to change this mode, for example, to “on the street”.

This is usually done the same way: “settings”. “Modes”, although it is quite possible that someone will have a different.

If this method on the push-button telephone did not turn on the voice, then the problem is most often in the socket where the headphones are connected.

Phone with no Sound, The speaker is not working Samsung Galaxy.A10, A20, A50, A50

If you do not use them, then it is possible that it is time to change the speaker. This is not uncommon in push-button telephones.

Page 30: Turn on animation to switch between, Apps, Set wallpaper for idle screen

To adjust the call volume, press the key

To mute or unmute the device, do one

Open the notification panel at the top of the screen and select

Sound.
Press and hold the Power key and select

In the Silent profile, you can set up notifications about

certain events. In standby mode, open

application list and select Settings

→ Vibration → Always or Only in silent mode.

When you switch to the Silent profile, instead of the

In Idle mode, open the application list and select

Select a ringtone from the list, then

Turn on animation to switch between

In Idle mode, open the application list and select

→ Display → Animation → Animation Part

Setting the wallpaper for the idle screen

Turning click sounds on and off

In the application list, select Settings

Adjusting the volume of keyboard sounds

From the home screen, press the volume key up or down.

→ Ringtone → SIM or USIM card → Ringtone

To mute or unmute the device, do one

Tap the status icon area and drag it down,

to open the notification panel, then select

Vibration.
Press and hold the Power key and select

Profile Silent.
In the list of applications, select

The device can be configured to alert you to various

events by vibration. In the list of apps, select

→ Sound → Vibration → Always or

Only in “Silent” mode. When switching to

Silent appears instead of the icon.

Setting wallpaper for the home screen

From the home screen, press the Option key and select

Item Wallpaper.
Select a folder of images

Table of Contents