How to turn off vpn on iPhone

Table of Contents

VPN how to set up in the phone

There are many options. both “free” and paid. The latter do not limit the speed of the Internet and do not limit the traffic. Although some free VPN clients can also boast of such functionality (only there is one drawback. the presence of advertising).

“Flexible” technologies

recently, such software worked unstably and caused a lot of dissatisfaction from the owners of mobile gadgets. The problem was that when using 3G internet, LTE, EDGE, when the device switched between different connection modes depending on the availability of coverage, the remote VPN servers did not always respond correctly to this behavior. As a result, communication breaks occurred.

But now the developers were able to adapt the equipment taking into account the above points, ensuring the correct two-way information transfer. Even when the network settings are changed, you will not notice any problems, everything will run smoothly and smoothly.

Well, now let’s move from theory to practice.

How to activate on iOS

What is VPN on iPhone is a section of options where you can manually configure it in two ways. The first is:

  • installing third-party software from the AppStore;
  • Then you need to go to the VPN tab and activate the desired option, and below from the list select the installed client:
turn, iphone

The second scheme requires manual manipulation:

  • The beginning is the same as in the previous instruction, but after activating the switch, you should click on the “Add Configuration” button;
  • We indicate which protection will be used. IPSec, L2TP. These data must be provided by the provider (service) that provides the VPN service;
  • We also indicate the ID of the remote server, login / password. issued during registration;
  • When you complete the data entry and click “Finish”, you can start safe surfing the Internet. If you need to disable VPN, just go to the settings and change the position of the corresponding switch.

Virtual Private Network. why use on your phone?

A virtual private network (VPN) allows your device to connect to remote servers through an “intermediary”. Thus, you can protect your connection, hide your real IP address so that attackers cannot penetrate the file system of your smartphone. In addition, VPN helps bypass site blocking providers, since requests are not sent directly from your device, but through servers located in other countries.

Why are VPN services becoming so popular? (You can easily verify this by searching on Google Play. you will see dozens of results). The fact is that users have become more worried about their safety and anonymity on the network. The first of these aspects is more important if you travel a lot and often connect to public WI-FI networks. Such a connection is the least secure, and you run the risk of becoming a victim of “spies” who intercept requests and track your presence on the Internet, can access important Skype, Viber, etc.

That is why it is worth resorting to a VPN in such situations (what it is and how to connect it. we will look at specific examples below).

Why do you need a VPN on your phone, how to enable it on iPhone, Android

Mobile gadgets are more and more included in our daily life every year. And if you actively use the Internet on your smartphone, then it will be useful for you to find out. VPN what is it in the phone, how to enable it on Android or iOS.

How to enable on Android

Here, the procedure is also not very complicated. You need to go to the main parameters of the device, to the section “Wireless networks”, then. VPN.

Next, we activate the mode and select the service provider in the list (provided that you installed a special application or previously made settings). If the list is empty, then at the very bottom we press the add button and enter the values ​​provided by the VPN provider.

How to disable on Android if needed? Yes, just as they turned on. we change the position of the switch.

I recommend not to bother. just install the Turbo VPN utility from Google Play. I talked about her in one of the videos on our YouTube channel:

VPN what it is and why on the phone. we figured it out. Frankly, I actively use this method to secure the connection when using public WI-FI at a train station or in a cafe. But sometimes this “trick” is useful for visiting sites that are blocked in our country.

The theme “VPN what is it in the phone” turned out to be simple and unobtrusive. I didn’t go deep into theory, but if you want to get maximum information, dig deeper into the essence of the technology, you can find a lot of data in Google or on Wiki.

How to set up a VPN on iPhone or iPad

VPN or Virtual Private Network is a way of organizing virtual computer networks over real ones. VPNs are used to solve a wide variety of tasks. For example, using a VPN, you can create a single computer network for several branches of the same company. But, for most ordinary VPN users, this is primarily a way to bypass various blocking.

This tutorial will show you how to set up a VPN on your iPhone or iPad. The material will be relevant for almost all iPad and iPhone models. Includes iPhone 4, 4s, 5, 5s, 6, 6s, and 7.

VPN setup on iPhone and iPad

In order to set up a VPN on an iPhone or iPad, you need to make the appropriate changes to the settings. To do this, open the “Settings” application and go to the “General” section.

After that, you need to scroll through the list of settings to the very end and open the “VPN” section. In this section you can add VPN connection and enable and disable VPN as needed.

If you have not configured VPN before, then this section will only have a button “Add VPN configuration”. Click on this button to continue.

After clicking on the “Add VPN configuration” button, you will see a menu for setting up a VPN connection. The first thing to choose in this menu is the VPN connection type. Three options will be available here: IKEv2, IPSec, and L2TP. The screenshots below show what the menu looks like in each of these cases.

In order to complete the VPN connection setup, you need to select one of the VPN connection types and fill in all the fields. If you do not know which type of connection to choose and what to enter in the remaining fields, then just contact your VPN provider or system administrator.

After filling in all the fields, you need to save the settings by clicking on the “Finish” button and the VPN connection will be created.

For example, below is a screenshot of how to fill in the fields to connect to the free VPN server of the Hide.Me provider. Select the L2TP connection method, enter the description of the VPN connection, enter the server address, enter the username and password, and the shared key. After filling in all these fields, click on the “Finish” button.

After filling in all the fields in this menu and saving the settings, you will return to the “Basic. VPN” settings section. The VPN connection you created will now appear here. In order to activate it, move the switch to the “Connected” position.

Also, after setting up a VPN, the “VPN” switch will appear in the main settings menu of your iPhone or iPad. It allows you to quickly enable or disable your VPN connection.

As you can see, setting up a VPN on an iPhone or iPad is easy. But, this procedure can be simplified even more, you will learn how to do this below.

How to turn off VPN on iPhone

If you enabled VPN on iPhone using settings, then to disable it, just go to settings again and click on the VPN switch. In this case, it is not necessary to delete the created connection.

If you connected to the VPN using the application, then you need to disconnect through it. In this case, shutdown via settings will not work.

How to connect VPN using the app

In addition to all of the above, there is another way to set up and connect to VPN on Athos or iPad. To do this, you need to use the application from your VPN provider.

As an example, we will show how this is done in the application from the VPN provider HideMyName, detailed information about which we give below. First, launch the application and click on the button “Log in with your account”.

Next, enter the username and password, which can be obtained by registering on the HideMyName website.

After we got into the application, just click on the “Enable protection” button.

After this simple procedure, your iPhone or iPad will connect to the VPN and start working through it.

VPN services for iPhone

VPN on iPhone and iPad is easy to turn on. To do this, just create a new configuration and activate the switch in the main settings menu. But, you may have a question where to get the addresses of the servers that you need to enter when creating the configuration?

To do this, you need a VPN service. You need to choose from the services available on the network, register on its website and pay the cost of the subscription. After paying for the subscription, you will receive detailed instructions on how to connect, the server addresses will be indicated there, as well as other information that may be needed when creating a configuration in the iPhone or iPad settings.

Usually, a subscription to such services is billed monthly, but in case of renewal for longer lines, you will receive a significant discount. Also, in some cases, the service provides a test period, during which you can check everything completely free of charge.

Next, we will consider proven services that provide a high connection speed and work quite stably. is an inexpensive VPN service with a stable connection and high speed. The main advantage of is its adequate price.

A monthly subscription here will cost only 470 rubles. But, when paying for half a year, a month of work will cost only 250 rubles, and with a ready-made subscription. 190 rubles. There is a refund (within 30 days).

At the same time, if you pay for the service for six months, the price will be reduced by almost half, and if you pay for an even longer period, the discount will be even more significant. The service offers a sufficient selection of servers around the world (North America, Europe and Asia). The operating speed is 70 Mbps or more, the connection is stable. An iPhone and iPad app is available that will greatly simplify setup. Go to

NordVPN is a well-known VPN service in the West with a large server base and high connection speed. NordVPN is positioning itself as the most secure VPN. To ensure protection, the most secure connection methods are used here and no logs are kept. In addition, the service protects users from leaks of DNS requests and IP addresses. A proprietary application is provided for setting up the connection on the iPhone. A monthly subscription here costs about 12, but if you pay for a year in advance, the price will be significantly lower. There is a refund (within 30 days). Go to

READ  Apple Watch won't connect to iPhone

How to turn off geolocation on Android and iOS

Almost all modern smartphones have a GPS module, but not all owners know that it brings not only benefits (for example, helps motorists navigate), but also harm, as it stores the history of places visited in a special journal. Let’s talk about how to disable geolocation on the phone and prevent the device from collecting this data from now on.

Usually, gadget owners do not change the default geolocation settings, thus accepting the terms of the user agreement for their recording and storage. A smartphone with the included GPS module starts recording your movements, focusing on the position of the satellites, on client Internet access points and many other parameters.

In general, it is definitely necessary to disable geolocation. And here’s how to do it.

How to turn off geolocation on iPhone (iPhone 7, 6, or 5s)

In the iOS operating system, all location information is actively used in built-in applications. for example, a GPS tag is put in a photo, which is then duplicated in such popular applications as Instagram and

To view the location history already saved by your smartphone (also called the history of the last visited places) on any updated iOS, go to the Settings menu, in it scroll down to the Privacy item, go to it and select Geolocation Services. In the sub-item that appears, go to “System Services”, where you will find a setting called “Frequently Visited Places” and a submenu “History”.

This is the difficult path that you have to follow to get to the GPS log, which shows all the places you visit. Each point can be opened with a double click and see the date, time and coordinates of the point on the map.

To prevent the iPhone from collecting such data, first click on the “Clear history” button, which will erase all previously collected information, and then set the “Frequently visited places” switch to “OFF”.

How to turn off geolocation on Android

All newer versions of Android also keep similar statistics. Smartphone manufacturers have different names for this function and try to place it in the most remote areas of the “Settings”, but in general you should look for a section named “Location” in which there should be an item “Location History”. In Samsung, for example, it is located in the “Geolocation” section, which is called by a long tap on the button of the same name in the smartphone’s notification shade.

To erase the recorded data, you must click on the settings icon in the corner of the screen and select “Delete location history”, and then double-confirm this action.

Here, watch also the video tutorial, in which we show how to turn off tracking / geolocation on the iPhone:

When you want to deactivate Find My iPhone?

Without deactivating this option, it is impossible to restore the functionality of the smartphone in iTunes. It will display a message informing you that, before proceeding with the flashing procedure, you need to deactivate the “Find iPhone” option.

At the same time, you cannot erase materials from the phone without disabling this function, reset settings, recreate files from a spare duplicate stored in iTunes. You also need to turn off Find My iPhone before leaving your device for Apple Service. In addition to the above cases, it is not recommended to disable this option.

There are four safe and effective ways to deactivate Find My iPhone. Three of them are performed using the device itself. Another method requires the use of a personal computer, tablet PC or other smartphone on iOS or Android.

Find iPhone deactivation methods

There are several methods to disable Find My iPhone:

  • Via installations on an iPhone or iPad via the iCloud menu. There are two options for how to do this.
  • Via Find iPhone iOS software. The software is distributed free of charge.
  • Using a personal computer running Windows or Mac OS X, using a tablet PC or smartphone in the Find iPhone application. By the way, devices with the Android operating system are also suitable for this operation.

A prerequisite for deactivating Find iPhone from third-party equipment is Internet access.

Disabling the option on iPhone by deactivating all iCloud features

It should be emphasized that iCloud functionality can be disabled separately from each other and all at once. These features include synchronization of mail, phonebook contacts, calendar, reminders, notes, photos, documents and information, as well as backup. In addition, these options include Safari, keychains, and the desired Find My iPhone feature. In order to disable all these options at once, you must perform a number of consecutive actions.

First, you should go to the iCloud settings and select “Remove account”. Then respond positively to the request for this operation.

Now you need to choose what to do with your Safari browser data and your iCloud contact list. You can choose to delete them or leave them on your smartphone.

Then you must provide your Apple ID and password. The device itself is tied to the identifier and you can see it in the menu settings of the “iCloud” section in the “Account” column. After confirming the deactivation, all iCloud functionality will be deactivated. At the same time, no notification will be sent to the email.

How to deactivate an option in an iOS app?

In situations where the user does not have access to their own iPhone due to loss or theft, you can disable the “Find iPhone” option using any other device with the iOS operating system. To do this, you need to open Find My iPhone. This can be done directly from the desktop of the device. Then you need to provide an Apple ID and password.

The next step is to wait for the status of all devices attached to the ID to update. After the list of devices appears, you must select the one on which you want to disable the “Find iPhone” function. To the right of the device name there will be a “Delete” button. It should be pressed.

It should be emphasized that you can erase devices in the Find iPhone application only if they are not connected to the Internet at that moment. iPhone, iPad or Mac PC must be offline. Otherwise, the “Delete” button will not appear in front of the device. Now you need to agree to erase. The device will be excluded from the list, after which you can start restoring iPhone through the iTunes application from “DFU-mode” or “Recovery Mode”.

It should be noted that in normal mode, to restore iPhone or materials from a backup, as well as delete information from the phone’s memory, you will need to deactivate Find iPhone directly on the device. Otherwise, iTunes will not take any action on the given request.

It should also be noted that if the iPhone is reconnected to the Internet before flashing, the phone will be added to the “All Devices” menu and “Find iPhone” will be activated again on it. Therefore, it is recommended not to immediately use the Internet on the smartphone after removing it from iCloud.

Deactivating Find iPhone on iPhone

The first step is to go to the iPhone settings and then to the iCloud menu. And then turn off the “Find iPhone” option in this section.

The system will require an Apple ID and password if the ID is not connected in the iPhone settings in the iCloud section. You will need to log in to deactivate Find iPhone. After deactivating the security option, the user will receive a corresponding text message to the e-mail address that he specified in the Apple ID settings.

How to turn off Find My iPhone?

This great option allows iPhone owners to remotely control their smartphone. This method may be needed in case of loss of the gadget or if it was stolen. Using the “Find iPhone” option, you can lock your phone, send a text message from it, or play a sound. In addition, you can delete personal data so that it does not become available to intruders or the person who found the device.

But there are situations when you need to disable this feature. An example is the requirement of service workers who take iPhone service or repair. Often they ask you to disable the “Find iPhone” option so that after a possible restoration of the device’s performance, it does not hang forever when you turn it on.

Possible problems

If the iPhone is connected to the network via VPN, then this is indicated by the corresponding icon in the top notification bar (usually it does not blink, but is simply displayed). It also happens that he suddenly suddenly disappears. This means that the VPN connection is not working. As a rule, there are two reasons for the problem:

  • unstable internet connection;
  • crashes on the server providing vpn services.
  • To get started, manually reconnect to the VPN using one of the above methods.
  • Then check if your connection to the mobile Internet or Wi-Fi network is stable.
  • Pay attention to the correctness of the specified settings.
  • If you used the application, then just install another service. The program you downloaded and downloaded earlier is likely to be blocking the VPN connection in this area.
  • You can also try to restart the device and disable the antivirus software.

How to connect VPN on iPhone using the app?

There are many VPN programs available on iPhone. precisely, every VPN provider has its own app. Therefore, you can simply go to the App Store, download and install it.

Although we recommend paying attention to the Betternet program. This is one of the most convenient applications of this kind. To connect and disconnect vpn, you need to tap just one button. At the same time, the VPN usage time is not limited. True, with the first launch, you will have to configure the profile. With the subsequent entry into the application, this will no longer have to be done.

Also, you will not need to create accounts or use any other additional services. Just go to Betternet, press “Connect” to connect and “disconnect” to disconnect. Also in this application there is no advertising, registration, etc. Even in China it works (there are a lot of restrictions on various resources), where the same popular VPN Master turns out to be useless.

Ask how this free VPN is doing without any financial backing? It’s simple. If desired, each user can become a volunteer and help the project by promoting and installing applications from the App Store. Quite interesting and uncomplicated.

For reference! What other programs for working with vpn can you recommend? These are Tunnel Bear, OpenVPN connect and Cloak. If you have not only an iPhone, but also an Android smartphone, then it is better to use the Turbo VPN program on it.

How to use a VPN on iPhone

VPN (full name. Virtual Private Network) is a method of organizing virtual computer networks over real ones. Why is it needed? They use VPN for a wide variety of tasks. For example, to bypass the blocking of access to certain sites that are prohibited in a particular territory. They use this communication technology in order to increase confidentiality. VPN makes it easy to encrypt your connection. As a result, the requesting IP will not receive your individual number, which says where you connect to the network, but another, tied to a place or a specific country.

So we invite you to work with us to figure out how to set up a VPN on iPhone. At the same time, we promise that the information below will be relevant for almost all models. 4, 4s, 5, 5s, 6, 7, etc.

How to remove VPN on iPhone?

To do this, go to “Settings”. Then select the “Basic” section. Then we click on “Profiles”. Find your VPN, tap on it and then press the red “Delete” button.

VPN setup instructions for iOS

You can enable VPN on iPhone in different ways. Although this is usually done through the built-in device settings or using third-party applications.

Let’s start by taking a closer look at the first option. That is, we will set up a VPN on the phone itself without installing special software from the Internet.

  • We pick up the iPhone 6, 7, 8 or some other version of the “apple” gadget.
  • Open “Settings”.
  • We go to the section “Basic” (on some versions of the OS you will need to go to the subsection “Network”).
  • Scroll down and click on “VPN”.
  • Click the “Add VPN configuration” button.
  • A menu will appear in which you will need to set certain parameters. We start by choosing the type of connection. There are only three of them. IKEv2, IPSec and L2TP. Which one to choose and what to enter depends on the VPN provider you choose. For example, to connect to Hide.Me, you can specify everything as in the screenshot.
  • After filling in all the fields, tap on “Finish” at the top.
  • Then we return to the “Basic. VPN” settings section. The connection you created will now be displayed here. To activate it, set the vpn switch to the appropriate position (by moving the slider to the right).
  • In addition, the “VPN” switch will appear in the main settings menu of your iPhone (where Wi-Fi, Bluetooth, airplane mode, etc. are turned on). This means you can quickly activate it next time.
READ  iPhone won't turn on after being dropped

For reference! VPN is a kind of link between your mobile device and the Internet. Its main function is to give a false IP address to mask the user’s real location. Although today many of us use VPNs in order to remove blockages to various prohibited sites.

Let’s summarize

Many people today believe that VPN is an area that only hackers and computer gurus may need. But this is a misconception. Any user, if his favorite Internet resource is blocked, will want to bypass the block and restore access to it. And it will be possible to do this with the help of a VPN. At the same time, we talked in detail about how to “turn it over” in this article.

Using third party YouTube clients

Another option to avoid annoying advertising content is to use a third-party app that will allow you to watch YouTube videos.

Note! Some third-party applications are free, and some Apple device owners will have to pay a certain amount.

Block spam with third-party apps for Apple devices

Blocking ads in iOS apps gives users the ability to watch videos without spam. If this function is not available in the official YouTube app, then in third-party applications you can opt out of viewing any advertising content while the video is playing. This is a kind of free alternative for watching videos on this service. Here is a list of the most popular iOS apps and their prices:

  • ProTube (299 rubles);
  • Video Tube (free);
  • Tubex (free);
  • BuzzTube (free);
  • YouPlayer (free).

How to make YouTube ad-free on iOS. detailed instructions

Recently, YouTube representatives have started to conduct a rather aggressive advertising policy, inserting videos while watching videos. This interferes with a comfortable viewing of the content. Advertising can last from a few seconds to half an hour (or even more). In addition, if you do not turn off viewing in a timely manner, then the transition to another commercial will automatically begin. This article will tell you how to solve this problem on devices running iOS. These methods are very simple to implement, every owner of Apple mobile devices can use them.

Connecting a premium subscription in YouTube on iPhone

The easiest (aka official) way is to purchase a subscription. To do this, the user needs to log into the YouTube system and purchase the package. But we must remember that residents of not every country can use this function. It is available for Russia, but not for most of the CIS countries. For more details on the list of countries where a YouTube subscription is available, follow the link.

Alternative programs to block ads

How to turn off pop-up ads on iPhone via Adblock for iOS

Blocking advertisements on YouTube (or any other website) is not illegal, but many content creators rely on ad revenue to support their channels. Therefore, when viewers use a YouTube blocker, the channel owners are not paid. Fortunately, there are ways to remove ads and still support the people who make and release videos.

AdBlock was once the best way to block ad content

There are various ad blockers for iOS and Android, but the easiest way to watch YouTube videos without spam is to use the Adblock browser available on Google Play and the Apple Store. User doesn’t need to root their Android device or jailbreak iPhone to enjoy watching YouTube.

If the user prefers to use the default iOS browser, Apple allows you to block YouTube ads in Safari using dedicated apps. After downloading them from the Apple Store, you need to activate the ad blocking function in the device settings:

  • Go to “Preferences” in Safari.
  • Activate the pop-up blocker toggle, then click Content Blocker.
  • You need to make sure blocking is enabled in the “Allow these content blockers” section.

Note! AdBlock iOS YouTube was a very useful utility, but it doesn’t work now. YouTube without iOS ads can no longer be done with this program.

If the viewer wants to continue supporting YouTube content creators, they can sign up for YouTube Premium, which also provides access to exclusive shows like Mind Field or Cobra Kai. Other ways to support your favorite YouTube creators include donating directly through services such as PayPal and Patreon, or through YouTube’s Superchat feature available during live streaming.

How to remove VPN from iPhone

Blocking advertising content on YouTube can in some cases harm the channel owner

How to turn off ads on iPhone

Ads that are displayed on the screen when a user is watching their favorite YouTube videos on an iPhone (X / 8/8 Plus / 7/7 Plus / 6s) can be a hassle. The good news is that there are many tricks you can use to block YouTube ads on iPhone.

The first option is to enable YouTube downloader to download the video and play it offline. The second option is to install a third-party program that will block any advertisements on YouTube. This article will go into details about these two options for blocking YouTube ads on iPhone.

Important! Each user should remember that advertising is a forced action. Thus, channel owners are paid for their activities.

How to turn off VPN in iPad,iphone?Wifi not working (Solved)

Blocking YouTube ads with a VPN

One of the hardest methods to get rid of advertising content is to use a VPN. Apple AppStore is full of apps that promise to block ads on the iPhone, and get rid of annoying banners and pop-ups.

Note! If you look at the App Store reviews, you can see that there is no ad blocking app that is suitable for all situations.

Most applications use a VPN to block ads and filter content over a remote server. Along with slowing down your internet connection, this also poses security risks as the application running in the background basically monitors all internet traffic. How to enable ad blocker:

  • You need to download the selected program from the App Store. It is possible that the “Content Blocking” option will not appear in the “Settings” application if the corresponding application is not installed.
  • You need to open the “Settings” application.
  • Go to Safari to Content Blockers.
  • Enable blocker.

How to make YouTube ad-free on iOS

This section will take a closer look at how to disable ads on iPhone. The most popular methods, their advantages and disadvantages are listed below. How to disable pop-up ads on iPhone and can you do it yourself? Of course, and even so, you don’t need to have advanced knowledge in OS settings.

Access scheme for blocking spam in Apple devices

How to block ad content in iOS apps

YouTube without iPhone ads can be set up without any complications. To get rid of such content, which is called ad in English, you can use standard tools such as AdBlocker (block, blocker) or other methods. Typically, the browser uses this program to save the user from viewing unnecessary information. Most social networks, for example VK, are now overflowing with such content, which most users try to turn off, because it has a tendency to pop up and spoil work at the most inopportune moment.

It is possible to block spam content that interferes with full-fledged work not only with the help of paid services. Disabling is possible in the YouTube viewer itself. It is an order of magnitude more difficult to do this through a mobile browser, but each user can independently choose a convenient way for him to remove ads directly while viewing or permanently remove them.

How to install VPN on iPhone or iPad?

Now, when in many regions of Russia one or another popular Internet service can be turned off at any time, VPN is gaining special popularity. However, not all users know what it is and how to encrypt their connection on an iPhone or iPad. But sometimes it is simply necessary.

First, let’s figure out what is meant by VPN. This is a technology for protecting your Internet connection, which works on a rather simple principle: a request comes from your device to connect to a VPN server, and only then you get to the Network, due to which all traffic goes through the VPN. Roughly speaking, this is a kind of intermediary between you and the World Wide Web, which in addition provides an IP address, masking the real location of the user.

There are quite a few ways to install a VPN on an iPhone or iPad, but today we will look at one of the simplest and most common. installing a special application from a VPN service.

After downloading the application, you will be prompted to install the TunnelBear profile, and after that you can use the utility for your own pleasure. Just select the country whose server you want to use and connect to it. For an additional fee, you can expand the number of gigabytes available for surfing the Internet.

Name: TunnelBear Publisher / Developer: TunnelBear, Inc Price: Free In-App Purchases: Yes Compatibility: Universal App Link: Install

Another useful VPN software for iOS is Cloak. The installation procedure is exactly the same: download the app (free) from the App Store, install the profile, and add a new VPN configuration. A free trial period for 30 days is provided, but if you wish, you can choose one of the tariff plans without restrictions on gigabytes.

You will find out that VPN is enabled on your iPhone or iPad by the corresponding icon on the top bar.

Title: Cloak. Super Simple VPN Publisher / Developer: Bourgeois Bits LLC Price: Free In-App Purchases: Yes Compatibility: Universal App Link: Install

If you are often on public Wi-Fi networks, using a VPN becomes a real necessity. Therefore, these utilities will come in handy for any user of iOS gadgets who spends a significant amount of time on the Web.

Wi-Fi Disabled on iPhone: All Causes and Solutions

When buying a flagship smartphone from a popular company, you want to get a gadget that will work flawlessly. However, there are no perfect smartphones, each has its drawbacks and drawbacks. IPhone users are increasingly complaining about Wi-Fi connectivity issues. Let’s figure out why Wi-Fi turns off on iPhone, and how to fix it.

No connection

The cause of the problem is the Wi-Fi module installed in all iPhone models. Ways to solve the problem:

  • Restart in forced mode. In new models, for this, you need to alternately press the volume up and down buttons and hold down the side button for a while.
  • Forget the password from the Wi-Fi network. Go to “Settings”, open the “Wi-Fi” tab and select “Forget this network” and re-enter the security code.
  • Delete data from Wi-Fi networks. To do this, you also need to go to “Settings”, select the “General” tab, then “Reset” and click “Reset network settings”.
  • Disable VPN services. This option is enabled in “Settings”, in the “General” tab. Also, VPN must be disabled in downloaded third-party applications.
  • Change DNS server. In the “Settings”, in the “Wi-Fi” tab, you must select the desired network, click on the “i” icon and enter the values ​​of DNS servers from Google or OpenDNS.
  • Update the operating system. Old bugs are fixed on newer versions of iOS, so it’s worth checking for updates.
  • Reconfigure via iTunes. The last method to solve the problem is to completely reconfigure the smartphone. In order not to lose data, you need to save a copy of the system.

If iPhone won’t connect to the network, see the following to fix the problem

Wi-Fi off periodically

The device may turn off due to two features on the iPhone that are not always useful:

  • Wi-Fi assistance. This function is designed to automatically switch to mobile internet when the signal is lost. But sometimes the iPhone loses the network even when the router is unstable: when the speed decreases or the ping increases. You can disable this function in the “Settings”, in the “Cellular” tab.
  • Auto connection. When Auto Connect is enabled, Wi-Fi on your phone will turn off and switch to other available networks after each disconnect, even if their signal is worse. You need to turn off auto-connection for each network separately.

Shutdown in sleep mode

Most often this is due to the characteristics of the router, and not the smartphone, so you need to correct the parameters of the router itself. Here are the features that might be the reasons why Wi-Fi keeps turning off on iPhone in lock mode:

  • Small lease time for an IP address;
  • EAP encryption;
  • Option WMM;
  • Inappropriate range;
  • Roaming Helper;
  • Auto channel detection.
READ  How to disable home button on iPhone screen

Find out why iPhones running iOS 12 are having wireless problems in the following

Have you encountered a similar problem? How was it solved? Share your experience to make the material as useful as possible for you and other readers of our portal!

Disable VPN on Android

To perform this procedure, you can use only two methods of deactivating VPN, which in turn offer several solutions at once. At the same time, keep in mind that each stage may slightly differ depending on the program, the version of the operating system and the manufacturer’s proprietary shell.

System Tools

Like other operating systems, Android provides by default the tools to add and then manage VPNs through its internal Settings. You can deactivate the connection in a special section, the location of which practically does not change in different versions of Android, be it 4.4 or 8.

    Expand the standard “Settings” application and select the “” section in the “Wireless networks” section. From here, in turn, you need to go to the “VPN” page.

Once in the section with the list of available networks, select the option you want by tapping on the line or the gear icon. As a result, a pop-up window with information about the connection should be displayed on the screen.

Click on the “Disconnect” link in the lower right part of the window, and the procedure for disconnecting the VPN can be completed. Each connection can also be deleted through the settings, thereby performing automatic deactivation.

The presented method is relevant only for pure Android, while proprietary shells can differ significantly in terms of location and section names. over, it is not possible to manage VPN on every smartphone.

Third party applications

Due to the large number of Android apps that provide the ability to use VPN, it is impossible to consider disabling all existing options at once within the framework of one article, however, fortunately, in most cases, the procedure comes down to the same steps. For this reason, we have presented only two universal instructions that are quite applicable for well-known applications like ZenMate, Turbo VPN, OpenVPN and many other analogs.

Application settings

  • Open the application using the corresponding icon in the list of installed software and click on the icon in the center of the screen. Sometimes the required button is accompanied by captions like “Connected” or other conventions, but it can also be a regular static image.
  • If the button is not on the start page, be sure to visit the main menu in the upper left or upper right corner of the screen to find the corresponding icon. Anyway, after clicking, the connection will be disconnected.
  • Quick Access Toolbar

      As an alternative, but more universal option, completely identical for any third-party applications with VPN services, there is a quick access panel. To deactivate the connection using this method, you need to unfold the curtain and tap on the line with the key or application icon.

    Immediately after that, the screen will display the main page from the first instruction or a pop-up window with basic information about the active connection with the ability to deactivate the VPN. To disconnect, use the “Disconnect” button and, if necessary, confirm the procedure.

    The described actions should be enough to successfully turn off the VPN, regardless of the application used, Android version, and other features. At the same time, if you still encounter problems, be sure to report it in the Комментарии и мнения владельцев.

    Removing applications

    An auxiliary solution for the first method, indispensable in some situations, is the removal of the application providing VPN services. This makes it possible to deactivate any connection established via the corresponding software, even when the software does not work properly. The very same removal process was described by us in a separate article using the example of a random application.

    To eliminate possible problems after removing such software, be sure to reboot your smartphone, and if you wish, you can clear the system of debris. It is quite possible to get by and restart the Internet.

    Ways to Disable VPN on Android

    Today, VPN technology is used to bypass regional restrictions not only by PC users, but also by owners of devices on various mobile platforms, including Android. And although a configured virtual network is an indispensable solution in many situations, it is much easier and more efficient to use a regular Internet connection on an ongoing basis. Within the framework of this article, we will just tell you about several methods for deactivating VPN using the example of applications and system settings of the platform.

    Resetting smartphone settings

    Resetting your smartphone to the factory state is a radical solution, accompanied by clearing the internal memory. Because of this, such an approach will be relevant only in a rare number of cases when one or another VPN cannot be turned off using traditional methods. We have disclosed this topic in sufficient detail with all the nuances in a separate instruction on the website.

    The VPN deactivation procedure, as you can see, does not require any particularly complicated steps and is most often done in a few taps of the screen, especially when compared with setting up a new connection. In addition, as a last resort, you can always resort to more radical options, also presented earlier.

    How to enable VPN on iPhone

    In order to enable VPN on iPhone, you must first set it up. To do this, open the iPhone settings and go to the “General. VPN”.

    In this section, you need to use the option “Add VPN configuration”.

    After that, a large window will appear with VPN connection settings. Here you need to correctly indicate the type of connection, the server address, and enter the correct access data. For detailed information about the settings that you need to use here, you can find out in the support of your VPN service. After making all the settings, you need to save the VPN connection using the “Finish” button.

    After setting up a VPN connection, return to the main iPhone settings screen. Here, next to Wi-Fi and Bluetooth, a VPN switch should appear.

    Slide this VPN switch to the “On” position and your iPhone will automatically connect to the VPN.

    It should also be noted that many VPN services have their own apps that make connecting to a VPN much easier. In this case, you just need to launch the application on the iPhone and click on the “Connect” button.

    What is a VPN for iPhone

    As we said, VPN can be used for different purposes. Below we will look at a few of the most typical examples in which a VPN can be applied to an iPhone or other mobile phone.

    • Secure internet connection. When you connect to an unsecured Wi-Fi (for example, in a cafe, hotel or airport), you are in danger, as in this case, your data can be intercepted and used by strangers. A VPN can be used to solve this problem. To do this, you need to connect your iPhone to Wi-Fi and immediately turn on the VPN. After that, all your traffic will be transmitted through an encrypted virtual network, which will protect you from information leakage.
    • Anonymity on the Internet. When surfing the Internet, you may need to hide your real location. A VPN can also be used to accomplish this task. Connect your iPhone to the Internet in any way you like and turn on VPN. After this connection, your traffic will go through the server of the VPN provider, which will hide your real location.
    • Bypassing restrictions. Many countries have lists of sites that are blocked from access. But, using a VPN, these restrictions can be circumvented. To do this, simply connect the iPhone to the Internet and turn on the VPN. After that, your traffic will go through the VPN provider’s server, which will allow you to enter the blocked resource. In this case, it is important to understand that to bypass the blocking, you need a VPN server located in another country.
    • Connecting to a corporate network. Using a VPN on iPhone, you can connect to your company’s virtual network and access all the resources that are present on that network. For example, it can be access to an internal site that only works on the network and is not accessible from the Internet.

    VPN at a glance

    In order to understand what a VPN is on the iPhone, you need to download to understand the meaning of the term VPN itself. This term is an abbreviation for Virtual Private Network, which can be translated into Russian as a virtual private network. Such networks are used in cases where it is impossible or not rational to organize a real, physically existing network. Virtual networks transfer data over existing networks, most often over the Internet. At the same time, thanks to encryption, all transmitted information remains reliably protected, regardless of the reliability of the network on top of which the virtual network is running.

    A typical use case for a virtual network is a corporate network that unites several regional offices of a company into one common computer network. When building such a network, it does not matter how far the company’s branches are from each other, since data will still be transmitted over the Internet.

    Also, virtual networks can be used for other tasks. For example, some ISPs use VPNs to connect users to the Internet. But, ordinary users, most often, use VPN when they need to ensure the security of the Internet connection or bypass the blocking of access to sites. This is the VPN scenario most commonly seen on iPhones and other mobile phones.

    What is VPN on iPhone

    There has been a lot of talk lately about VPN and its use on a mobile phone like the iPhone. But, many users still do not know what this technology is and what it is for. To close this knowledge gap, we will tell you about what a VPN on iPhone is, what it is for and how to enable it.

    How to turn off VPN on iPhone

    If you enabled VPN on iPhone using settings, then to disable it, just go to settings again and click on the VPN switch. In this case, it is not necessary to delete the created connection.

    If you connected to the VPN using the application, then you need to disconnect through it. In this case, shutdown via settings will not work.

    VPN services for iPhone

    As you may have noticed, the VPN is very easy to turn on. On iPhone, all you need to do is add a new configuration and turn on the switch in the main settings menu. But, the question may arise, where to get the parameters that need to be specified when creating a configuration?

    To do this, you need to choose a VPN service, register on its website and pay for the service according to the tariffs. After payment, the service will give you detailed instructions on how to set up your devices, there will be indicated server addresses, as well as a username and password, which must be specified when creating a configuration in the iPhone settings.

    Usually the services of such services are paid on a monthly basis, but if you pay a year in advance, you can significantly save. Also, sometimes a trial period is available, during which you can test the service without paying for the service.

    Below we will look at several proven services that provide a stable connection and high Internet speed. is a simple and affordable VPN service with a fast and stable connection. The main advantage of this service is its affordable price.

    The monthly rate here costs only 470 rubles. But, if you pay for the service for six months, then, and if you pay for a year in advance. only 190 rubles. Refund is possible (within 30 days).

    At the same time, the service offers an extensive network of servers that are distributed around the world. There are servers in North America, Europe and Asia. The internet speed is 70 Mbps or faster, the connection is stable. There is an iPhone application that allows you to connect in one click, without configuring. Go to

    NordVPN is a popular western VPN service with a large number of servers and high speed. The highlight of NordVPN is the emphasis on security, only the most secure connection methods are used here and no logs are kept. Also, the service reliably protects against leaks of IP addresses and DNS queries. Connection setup can be done through the app. The cost of a month of subscription here is almost 12, but if you pay for the service for a year or more, the price will be noticeably lower. Refunds are possible (within 30 days). Go to