Laptops and Tablets • Recommendations and advice

iPhone

How to turn off sound on iPhone 11

How to turn off silent mode on iPhone 7?

The easiest way to turn off the sound on your iPhone is to use the switch located above the volume buttons on the left side of the case.

How to change volume buttons on iPhone 6?

IPhone 6 and iPhone 6 Plus Volume Buttons Replacement

  • Unscrew the Pentalobe screws near the Lightining connector:
  • Lift the front panel of the device using a suction cup and a sharp-edged plastic tool:
  • Remove the five screws that secure the front panel of the device:
  • Remove the protective metal plate:
  • Disconnect all cables from the front panel of the device and remove it:

How to turn off silent mode on iPhone without a button?

To make your phone truly quiet, you can turn off vibration in silent mode by going to Settings> Sounds. Locate the “Vibration in mute” switch and turn it to Off.

How to increase ringer volume on iPhone 11?

If you like loud sounds and after disabling the Attention Alert function, you still feel as though the iPhone is ringing quietly, then you can set the volume to maximum. Go to “Settings” → “Sounds, tactile signals”.

What to do if there is no sound on your iPhone?

  • if the headphone or speaker jack is dirty, clean it carefully;
  • if the program fails, update the iOS device;
  • crash after unplugging headphones. plug and unplug again;
  • in case of a breakdown that does not fix itself, contact Apple Pro Service.

Why iPhone tethering doesn’t work?

If you cannot find or enable the Modem Mode setting, check if your service provider supports this mode and if it is included in your data plan. On an iPhone or iPad in tethering mode, go to Settings General Reset and click Reset Network Settings.

How to remove silent mode on iPhone?

There are two ways to turn Do Not Disturb on or off. Go to Settings Do Not Disturb to manually enable Do Not Disturb or configure a schedule to enable or disable Do Not Disturb.

How to mute the camera on iPhone 11?

The easiest way to completely turn off the camera sound on most iPhones is to activate silent mode using the toggle switch on the left side of the device. When the mode is turned on, the display will show an inverted bell icon labeled “Silent Mode On.”.

Are there iPhones on which you cannot turn off the camera sound?

Does the iPhone camera click even when the device is in silent mode? Well, we can only congratulate you. obviously, you got a smartphone intended for sales in Japan. It will be possible to turn off the shutter sound on such a “mobile phone” only after jailbreak.

It’s all about Japanese law. One of the laws of the Land of the Rising Sun prescribes that any photographic equipment must necessarily emit a characteristic click during photographing. this applies to both professional cameras and mobile phones. The law is aimed at combating voyeurism. a sexual deviation, which consists in the desire to spy on people in intimate situations. In Japan, voyeurism has become a serious problem after everyone has the opportunity to purchase a compact smartphone with a camera and participate in a “skirt hunt”.

When buying a Russian amateur photographer, make sure that the iPhone is not intended for the Japanese market. It’s easy to check: just pay attention to the model name of the device. Information about the model can be obtained by following the path “Settings”. “General”. “About this device”.

Latin letters at the end of the model name carry information about the country. In our case, the name contains the letters RU, which means that the iPhone is intended for Russia. If the name of the model is the letter J. the smartphone is “Japanese”.

iPhone 11 : How to Turn OFF Camera Sound on iPhone 11 / 11 Pro / 11 Pro Max

Models with the letters KH in the name should also be avoided. These gadgets are made for sales in China and South Korea. South Korea also has a Japanese-like law, although in this country the fight against voyeurism is not so fierce.

How to turn off camera sound on iPhone without jailbreak?

The easiest way to get rid of the shutter click is to put your gadget in silent mode. You can use a special lever located on the left side of the mobile device.

You can also turn off the sound through the “Settings”. You need to go to the “Sounds” section in the “Settings” and move the “Calls and reminders” slider to the left until it stops.

If the iPhone is in silent mode, the user, of course, will not hear not only the shutter click, but also the calls and message notifications. This is a significant drawback of this method.

There are other ways to get rid of the camera sound:

    Take pictures while filming a video. There will be no click, but the pictures will be of rather poor quality. because they will receive the same resolution as the video. Shoot by connecting headphones to the 3.5mm jack. In this case, the sound of the shutter will go exactly to the headphones, and those around, most likely, will not be able to hear it. However, wearing headphones specifically for the sake of taking pictures without attracting attention is absurd. Take pictures while the audio player is silent.

Alas, all of the above methods are from the field of “life hacks”. To remove the shutter sound at the software level, you definitely have to jailbreak.

How to turn off camera shutter sound on jailbroken iPhone?

On a jailbroken iPhone, you can turn off the shutter clicking without affecting other system sounds. But for this you need to use computer software. one of the following file managers: iFile, iFunBox, iMazing. We recommend iFunBox because this program has the most intuitive interface and is easy to use.

How the camera shutter sound is turned off via the iFunBox file manager?

Run the utility and go to the “Browser File” tab.

Find the one named “Raw File System” among the root folders and select it with the cursor.

Follow the path / System / Library / Audio / UISounds. In the last subfolder you will find the photoShutter.caf file.

Change the name of this file in some way. You can, for example, add the number 1 to make “photoShutter1”, or swap the letters. It is not recommended to delete the photoShutter.caf file. Otherwise, if you later want to return the shutter sound, you will be faced with the task of finding this file on the Internet.

Save changes and close the iFunBox utility.

Muting the iPhone camera using different file managers is almost the same. Minor differences can only be in the first stages.

turn, sound, iphone

If the user of the jailbroken iPhone does not want to make changes to the system files, he should resort to another method of disabling the shutter click. download and install the tweak intended for this from Cydia. The tweak is called Silent Photo Chill. it’s available in the ModMyi repository.

READ  Laptop Does Not Boot When I Turn On What To Do

How to turn off camera sound on iPhone?

Apple is notorious for making life difficult for its users. Even such a trivial operation as turning off the camera shutter sound is not easy on the iPhone. The article will tell you about several effective ways.

When the photo is taken, the iPhone emits a loud click, imitating the sound of a camera shutter. This often becomes a hindrance for the photographer, because the characteristic click attracts the attention of others who are eager to find out which of them became the object of interest and got into the frame.

Users trying to find a way to mute the camera make the same mistake. they look for a solution in Settings. But there is no toggle switch in iPhone Settings to disable the shutter click. You will have to resort to other methods.

There is no official way to get rid of iPhone camera shutter clicking. The simplest solution for a photographer is to turn off the sound on the gadget completely using a special lever.

There is also a method that makes it possible to remove only the click of the shutter, leaving the rest of the system sounds at the same level. However, it can only be used by users of gadgets on which the jailbreak is already installed. Hacking a device to get rid of the camera sound is just silly.

How to turn off headphone mode in iPhone

IPhones, like iPads, have two volume modes. Headphones and Ringer. On the one hand, this is convenient, since these two modes exist each on their own, which allows you to memorize the volume level of each mode. For example, we listened to music in headphones with a volume level of 50%, turned off the headphones and got into the Call mode, where the volume level set earlier is 100%, and you don’t need to turn up the volume to hear the ringtone of an incoming call well. After some time, I decided to listen to music (instructions for downloading music), plugged in the headphones and did not go deaf, since again the volume level went 50% on its own, i.e. the value last set for this mode. The volume mode is displayed on the screen as a pop-up window with a bell (or speaker) when headphones are connected and disconnected from the iPhone.

But sometimes, iPhone users are faced with the problem of automatic mode change. It happens as follows: after disconnecting the headphones from the iPhone, the phone does not go into Call mode, while remaining in the Headphones mode, while there is no sound in the iPhone. There can be several reasons for a failure in volume modes. dirt, dust, water, excessive moisture getting into the connectors, and finally mechanical damage. In such cases, users have a question. how to turn off the headphone mode in the iPhone on their own?

Buyers of used (second-hand) Apple phones, be sure to check if the automatic volume mode switching in the iPhone works.

For this, it is advisable to have any headphones with you. We turn on the headphones and listen to the clicks of the virtual keyboard (or the sound of blocking) in them, and the sound of the clicks should sound only in the headphones (if, in addition to the headphones, the sound of the clicks is emitted by the phone itself, then this is a malfunction). Unplug the headphones, now the click sounds should be emitted by the iPhone speaker. If you don’t have the headphones with you to check, then unlock the screen and press the volume buttons on the side of the iPhone, while the volume indicator should be in the Call mode. If, when the headphones are disconnected from the jack, as a result of pressing the volume buttons, the indicator displays the mode. Headphones, then this is a failure or malfunction. If there is no sound in your iPhone without headphones and by adjusting the volume level we see the Headphones mode, then it is advisable to contact the service center for help. But, at your own peril and risk, you can try turning off the headphone mode in the iPhone yourself at home. Choosing the method below, first analyze the previous failure of the manipulation with the phone and remove the case.

  • Charging cable and reboot. The first thing to try is to connect the charging cable to the iPhone (without headphones), turn off the phone and turn it on again. If it does not help, then we do the same, but with the power adapter plugged into the outlet and instead of off / on. applying a hard reboot.
  • Toothpick. If you practically did not use headphones, then the iPhone connectors may be clogged, they can become clogged with dust and even pieces of clothing, and the contacts may become dirty. In good lighting, examine the headphone jack and remove it with a toothpick, as well as the charging connector, clean the Lightning with a corner of paper. In addition to a toothpick, they use a corner of paper, a needle, a cotton swab, alcohol, the main thing is not to make it worse.
  • A vacuum cleaner. If the iPhone could fall into the snow, get wet, then a vacuum cleaner will help, in general, we vacuum all the connectors. Thus, pulling out moisture. If a lot of time has passed since the moment the snow or water hit, then the contacts may oxidize and the vacuum cleaner will not help. You can use a vacuum cleaner to collect dust residues even after a toothpick.
  • Reset. How to reset settings and content read here. “Reset to iPhone”
  • Hair dryer. In the case of water and snow, a hairdryer is sometimes used after vacuuming to dry the connectors.
  • Fridge. Well, the most frostbitten option is to put the iPhone in the refrigerator for 5-10 minutes.
  • Readers’ advice. Some readers of this manual suggested their own ways to solve the problem: one, two, three, four, five, six, seven, eight, nine, ten, eleven.

All these methods have helped people to turn off the headphone mode in iPhone 4, 5, 5s 6, 7 and other models without resorting to the service. The main thing is to do everything carefully without fanaticism and pressure. If you are afraid, then bring it to the SC. About which method helped you, write in the comments.

How to turn off camera sound on iPhone

To begin with, the volume buttons located on the edge of the iPhone can only reduce the volume of the camera shutter sound. over, it is necessary to reduce the sound when the Camera application is inactive. Otherwise (when the Camera application is running), the buttons function as a shutter release.

The easiest way to completely turn off the camera sound on most iPhones is to activate silent mode using the toggle switch on the left side of the device.

When the mode is turned on, the display will show an inverted bell icon labeled “Silent Mode On.”.

Another way out is to launch the Music or Podcasts app, turn on a song or podcast, and turn the volume down to zero. Then we minimize the program using the Home button and activate the camera. Shooting will proceed without the shutter clicking. If you don’t want to drain your battery, pause the track or podcast that is playing.

Note that when shooting in Live Photo mode, the camera also works without sound.

Finally, you can download camera apps from the App Store, such as the Microsoft Pix, which can be configured to turn off the shutter click.

How to turn off camera sound on iPhone?

Apple is notorious for making life difficult for its users. Even such a trivial operation as turning off the camera shutter sound is not easy on the iPhone. The article will tell you about several effective ways.

When the photo is taken, the iPhone emits a loud click, imitating the sound of a camera shutter. This often becomes a hindrance for the photographer, because the characteristic click attracts the attention of others who are eager to find out which of them became the object of interest and got into the frame.

Users trying to find a way to mute the camera make the same mistake. they look for a solution in Settings. But there is no toggle switch in iPhone Settings to disable the shutter click. You will have to resort to other methods.

READ  How to turn off automatic brightness on iPhone

We use a headset

If you have headphones from a smartphone and need to stay quiet, just plug them into the iPhone jack and continue shooting with the camera. The click from the photos will not be heard by others, but you will hear it in the headphones.

Another nice thing about the headset is the ability to create images with the volume key. If you open the Camera application and press the volume button, the system will automatically take pictures.

Using headphones

Another way to turn off the camera shutter sound on iPhone is to plug in headphones. If you connect headphones or any other headset that can receive an audio signal via a wire or via Bluetooth to the iPhone, then all sounds from the device will be automatically played on the external device.

That is, if you connect headphones to the iPhone, then no one will hear the sound of the camera shutter except for the owner of the smartphone, who is wearing these headphones. That is, if you like the clinking of the camera, but you do not want to embarrass others with this sound, then just put on headphones.

Many smartphone owners use headphones while shooting to take more interesting shots. Since using the buttons on the headset, you can take photos remotely, without even touching the smartphone.

To bring the sound back, simply pull the headphones out of the jack. If you are using a wireless headset, then on the iPhone itself, turn off the wireless connection.

How to turn off camera sound on iPhone without jailbreak?

The easiest way to get rid of the shutter click is to put your gadget in silent mode. You can use a special lever located on the left side of the mobile device.

You can also turn off the sound through the “Settings”. You need to go to the “Sounds” section in the “Settings” and move the “Calls and reminders” slider to the left until it stops.

If the iPhone is in silent mode, the user, of course, will not hear not only the shutter click, but also the calls and message notifications. This is a significant drawback of this method.

There are other ways to get rid of the camera sound:

  • Take pictures while filming a video. The click will not be heard, but the pictures will be of rather poor quality. because they will receive the same resolution as the video.
  • Shoot by connecting headphones to the 3.5mm jack. In this case, the sound of the shutter will go exactly to the headphones, and those around, most likely, will not be able to hear it. However, wearing headphones specifically for the sake of taking pictures without attracting attention is absurd.
  • Take pictures while the audio player is silent.

Alas, all of the above methods are from the field of “life hacks”. To remove the shutter sound at the software level, you definitely have to jailbreak.

Launch app with music

This method will work on iPhones with iOS 11, 10, 9, 8 and newer versions of the system.

  • Launch the Music application and play any song.
  • Use the volume buttons to completely mute the sound.

Then use the Camera app as usual, and you will no longer hear the usual shutter sound.

The most important thing in the above method is to turn the volume down to zero in the Music app.

Are there iPhones on which you cannot turn off the camera sound?

Does the iPhone camera click even when the device is in silent mode? Well, we can only congratulate you. obviously, you got a smartphone intended for sales in Japan. It will be possible to turn off the shutter sound on such a “mobile phone” only after jailbreak.

It’s all about Japanese law. One of the laws of the Land of the Rising Sun prescribes that any photographic equipment must necessarily emit a characteristic click during photographing. this applies to both professional cameras and mobile phones. The law is aimed at combating voyeurism. a sexual deviation, which consists in the desire to spy on people in intimate situations. In Japan, voyeurism has become a serious problem after everyone has the opportunity to purchase a compact smartphone with a camera and participate in a “skirt hunt”.

When buying a Russian amateur photographer, make sure that the iPhone is not intended for the Japanese market. It’s easy to check: just pay attention to the model name of the device. Information about the model can be obtained by following the path “Settings”. “General”. “About this device”.

Latin letters at the end of the model name carry information about the country. In our case, the name contains the letters RU, which means that the iPhone is intended for Russia. If the name of the model is the letter J. the smartphone is “Japanese”.

Models with the letters KH in the name should also be avoided. These gadgets are made for sales in China and South Korea. South Korea also has a Japanese-like law, although in this country the fight against voyeurism is not so fierce.

How to restart iPhone without a button?

It is possible to control mobile devices from Apple and iPhone in particular without mechanical control buttons. The creators took into account, albeit a high, but still limited resource of mechanical controls, and in case the touchscreen of your iPhone survived the control buttons, the operations for which the “mechanics” were responsible can be performed using gestures.

Assistive Touch must be turned on in order to activate full iPhone touch control. This function allows you to flexibly configure the control of the device using gestures and completely replaces the mechanical control buttons.

Editing the file system

It is important that this method is only suitable for those devices whose firmware has been jailbroken. If this condition is met, then the following steps can be performed:

  • Connect the device using a USB cable and, as soon as it is authorized, open any file explorer, for example, iFunBox.

The camera on the iPhone is one of its main advantages. With the right skill, you can take very high quality pictures. To achieve high results, you need to understand the camera settings and set the ones that suit you best. If you often take pictures, and you are tired of the shutter sound, then you can turn it off temporarily by putting the device into silent mode, or by changing the system files if Jailbreak is installed.

Jailbreak

There is another scenario for the development of events. The point is that you can turn off the sound on the “apple” phone not only by using a special switch. This method is good for non-jailbreak gadgets. But what if this process has already been carried out? Then the answer to the question of how to turn off the sound on the iPhone on the camera will require other actions.

  • Download any file manager that works with iOS on your computer. For example iFunBox or iMazing.
  • Launch the corresponding application on the PC.
  • Connect iPhone to computer using a special wire.
  • Go to the System-Library-Audio folder. Find UISounds there. Open it.
  • Find document photoShutter.caf. Rename it. This file is responsible for the sound of the camera. After changing the name, it will no longer be recognized by the operating system.

That’s all. To restore the camera sound, you will have to return the mentioned document to its original name. There is nothing difficult or special about it.

When is Silent Mode or Do Not Disturb Mode Recommended?

The main difference between the above two modes is the glowing screen when receiving messages and notifications if silent mode is activated. If you are used to carrying your iPhone in your or bag, then there is nothing easier than mute the sound by sliding the switch with one movement of your hand.

However, keep in mind that vibration can be just as annoying and eye-catching as a ringtone.

If you always hold the device in your hand, on your lap or on a table, then it is best to use the Do Not Disturb mode so that the glowing screen does not catch your eye and does not cause unnecessary attention.

Activating Assistive Touch

  • Scroll to the bottom of the accessibility settings page and in the “Interaction” section select “Assistive Touch”;
  • In the next settings window, move the activation slider opposite “Assistive Touch” to the “Enabled” position (colored green). A semi-transparent button appears on the iPhone screen.
  • Touch the iPhone touch screen within this button (this gesture is called “Tap”). A window with available Assistive Touch options will appear on the screen.
READ  How to mute sound on iPhone 11

Applications

How to mute iPhone on camera? The last way is to use a variety of specialized programs. Not the best and most effective, but a convenient option for the development of events. As already mentioned, a switch on the phone mutes the sound completely. And special programs. only on the camera.

To bring your idea to life, you can pay attention to the following applications:

  • No Cam Sound;
  • Silent Photo Chill;
  • Bye shutter sound.

If the iPhone was purchased recently, then this article will be very relevant to you. The volume mode setting and switch in this phone are significantly different from the standard settings in any other smartphone.

The first thing to look out for when using an iPhone is the mode switch located on the side panel above the volume buttons. This mechanism will allow you to put the phone on a silent profile without taking it out of your or, on the contrary, to remove it from the silent one and turn on the “Normal” profile. Such a toggle switch is available in all smartphone models and is very convenient to use. If you see a red stripe, your phone is in silent mode, and if you do not see it, then in normal mode.

Also, check if your iPhone 5s or 6 is connected to the headset, because when connected, the sound will only come from the headphones.

If you checked and your phone is still in normal mode, then we advise you to check the volume mode settings.

Where to go for repairs

Contact the specialists immediately if the software is working properly, and the mechanism for adjusting or enabling the silent mode has stopped working due to mechanical damage or flooding. When the warranty period is violated, it is not necessary to waste time on a trip to the service center. it is much more convenient to call the master at home.

The iPhone is one of the most reliable phones of our time, but even it can break. You may notice that switching to silent mode and back will be done every other time. Or even the Mute switch will move without resistance, and there will be no mode switching at all.

In this case, normal use of the iPhone will be difficult: when the call sound is turned off, you can miss an important call, and the inability to turn on the silent mode can lead to an unpleasant situation due to a loud call during a meeting or other official event.

Purge the connector on the iPhone

Another method of mechanical cleaning is to use a can of compressed air (spray) or a vacuum cleaner. There are several ways to remove particles trapped in the port:

Blow air gently into the headset jack. This removes small particles

Spray can. Generally, these sprays are used to clean computer keyboards, but such a spray can also work for cleaning the port. The small plastic mount is ideal for a small connector. Direct the air stream to the appropriate slot. This will clean up more serious build-ups and clumps of dust. If there is too much debris, then it is better to use a vacuum cleaner. Better to use a small device and a small attachment. Route the hose so that the vacuum cleaner and smartphone do not touch hard.

Then check if the lower speakers are back in working condition.

What to do if the mode is disabled, but there is no sound

In case the silent mode is disabled on the iPhone, but the ringtones of incoming calls are not played, it is worth checking if the Do Not Disturb function is activated, since both of them can be enabled at the same time. Also, the sound can be muted if the calling number was blocked by the user.

When the button is broken

In the case when you need to turn off the sound on the iPhone, but the button on the body of the smartphone has broken, the “Do not disturb” mode comes to the rescue, which is configured in the Control Panel and through the Settings menu. It blocks all distractions from ringing tones and vibrations to light alerts.

To enable the Do Not Disturb function through the Panel, you need to slide your finger across the display from bottom to top and tap on the crescent-shaped icon. The corresponding icon will also appear in the status bar.

You can also go to “Settings”. “Do not disturb” and slide the switch opposite the corresponding function.

Do not disturb can be made permanent or scheduled for a specific time (for example, at night from 22:00 to 7:00).

  • choose in which case incoming calls and notifications will be blocked. always or only when the iPhone is locked;
  • allow certain “Favorite” numbers to receive incoming calls;
  • activate the “Repeated calls” function (canceling the muffling of the second call lasting three minutes from the same subscriber);
  • configure the “Do not disturb driver” function;
  • edit auto-reply to messages.

The main difference between “Silent” and “Do not disturb” is that in the first case, when you receive messages and notifications, the screen starts to glow, but in the second one does not.

Features of mute and unmute sound on iPhone

In iOS, developers have implemented several ways to turn off notification sounds for incoming calls and receiving notifications at once. The first is a silent mode that replaces the ringtone with vibration. The second is the Do Not Disturb function, which blocks any signals (including vibration and light warning) for a certain period of time. Both functions are subject to Customizing.

How to turn off the sound on a smartphone

To quickly activate the silent mode of the iPhone, a special button is provided, which is located on the left side panel of the device, above the volume control buttons.

To turn off the melodies, just slide the button to the left. An orange indicator will appear next to it, and a notification about switching to “Silent” and an icon with a crossed out bell will appear on the device screen.

To turn off not only sound notification, but also vibration, you need to go to the “Settings” of the phone, select the section “Sounds, tactile signals” and move the switch to the right opposite “In silent mode”.

How to turn off silent mode on iPhone

To turn off silent mode on iPhone, simply slide the switch on the case to the right. The action will be accompanied by vibration and the appearance of a bell icon on the display, under which there will be a volume status bar.

To turn off the Do Not Disturb function, you need to click the crescent moon icon in the Control Panel again or switch the corresponding slider to the inactive position in the Settings menu.

Silent mode on iPhone

This is a function used to reset incoming calls, as well as to turn off notifications and replace them with vibration (if vibration itself has been configured). This is the fastest and most convenient way to mute the device without turning it off completely.

The quietness of a smartphone can be useful when you are in places where you need to maintain silence: at work, in public places. At the same time, turning off the sound will not prevent the user from receiving notifications from applications and about missed calls. at such moments the display will be highlighted, displaying the incoming notification.

Attention! Silent mode does not apply to the alarm set in the Clock system application, and therefore it will ring at the appointed time. But the alarm clock set in a third-party program may not ring.

The choice of the appropriate mode depends on the iPhone usage scenario. Switching to Do Not Disturb is useful when your smartphone is in your hands or on your desktop. nothing distracts you from an important business meeting or work. Also, this function is useful at night to protect the device user from calls, alert melodies and a glowing screen.

HSIDG.COM 2021