How to make a Wi-Fi hotspot from Samsung Galaxy. Samsung Galaxy how to share WI-FI. How to change the password and WI-FI name on the phone.
Smartphones Samsung Galaxy is able to distribute the Internet SIMultaneously to several devices, phone, computer, laptop, tablet and others. The more devices connected to your smartphone, the lower the speed on the second devices, since the speed is shared among all devices. You can connect your laptop or computer to the internet from your phone wirelessly via the WI-FI hotspot on your phone.
Now let’s see how to make a WI-FI access point from Samsung Galaxy and distribute the Internet to another phone or other devices.
1) Open “Settings” on Samsung Galaxy and select “Modem and access point”. See the screenshot below, in it I selected this item in the settings.
2) Next, in a new window, we find the item “Mobile hotspot”. Look below in the picture.
3) Next, we see a menu as in the picture below, in it I also highlighted the place where you need to turn on the Wi-Fi access point on the phone.
You can also set up a Wi-Fi hotspot on Samsung Galaxy. To do this, click on three dots at the top of the screen on the right side, after which a menu should appear as in the screenshot attached below. Also in the screenshot you can see how the included WI-FI distributor should look like. It changed color from gray to light greenish.
In the menu that opens, we can configure the name and password of the WI-FI hotspot in Android. In the picture I have highlighted these points. In addition to the name and passwords, it is better NOT to touch anything. In the picture, the name of Wi-Fi is “AndroidAP”, if you do not change the search for an access point on the Samsung Galaxy, then you need to look for Wi-Fi under this name, if changed, then the one you specified. After you have found WI-FI to access it, enter the password you specified. If you want to see the password, turn on “Show password” in the settings.
Also, on Some Android Samsung, you can turn on the Wi-Fi access point through the quick menu. To do this, you need to pull the screen from top to bottom and you will see a panel with shortcuts to various functions. Next, by sliding the panel to the left or right, you need to find the access point icon and activate it by touching it. Below in the picture I have highlighted this icon, you can also go directly to the access point settings and also change the password and name of the WI-FI distributor.
If you connected via Wi-Fi to an android, but the Internet is available, check if the Internet is activated on the Samsung Galaxy to which you connected via the WI-FI access point, if the Internet is NOT turned on, then there will be no Internet on the connected devices.
We go to Settings (parameters) on your smartphone and look for the “Networks” item. Then we look for the item “Shared modem” or SIMply “Modem” there. Naturally, we choose it.
On second phones, this feature may be slightly hidden. Try looking for the item “Wireless networks” in the network settings (and most likely you will need to click the “” button) and already there you will find the item “WI-FI router” or “Modem”. Anyway, this function is somewhere here.
Next, select the item “WI-FI access point”. “Create access point”. Naturally, the names may differ slightly, but the essence remains the same. I think you can NOT go wrong.
Note! There are also 2 more points here. The USB tethering is not yet active as there is a connection. But if you connect your phone via a USB cable, the setting will become active and thus you can use the Internet on your laptop.
Well, Bluetooth, as you already understood, is needed to connect to a device via Bluetooth. But I don’t like this method at all.
Next, you need to specify what your WI-FI network will be called. For good reason, you can leave it as it is, but if you want, change it to make it more convenient for you. After that, we come up with a password so that the neighbors DO NOT dare to connect to us, well, in principle, you do not need anything else. Click “Save”.
We have saved it, but now we also need to enable it. To do this, we need to return to the “Shared Modem” menu. Where did we choose to create an access point, and activate it.
And of course, the most important thing is that you must have mobile Internet enabled on your smartphone, otherwise all our manipulations do not make sense. If Wi-Fi is activated on the smartphone, it will automatically turn off, because the power comes from the 3G or 4G mobile network.
How to quickly and easily share Wi-Fi from phone to laptop?
Hello! Dmitry Kostin is with you, and today I will tell you how to distribute Wi-Fi from phone to laptop using the SIMplest steps. Unfortunately, very often you have to resort to such actions, because the provider can be very unpredictable (either an accident on the line, or local glitches), and the Internet is needed more than ever. Thank God that a native smartphone can share its internet.
Since I am not the owner and fan of Apple products, I will only talk about working with an Android smartphone. You will need to follow a few SIMple steps.
Setting up a computer or laptop
Well, now the matter remains small. We need to find a wireless Internet connection on the computer, so we need a laptop, or a computer that supports Wi-Fi.
Now, in the lower right corner (in the tray), we are looking for the wireless connection icon, click on it and from the proposed list select the same network that we created on our phone. Next, enter the security key (password, whatever you came up with) and use the Internet.
This action has helped me out more than once, thanks to our unpredictable provider. Sometimes the Internet is urgently needed, but for some reason it is not. It is not very convenient to use this on a smartphone, so you have to manage to steal traffic to your phone in favor of surfing the Internet at your computer.
Yes, and also Don’t forget about traffic. Spending time on such an Internet eats up your traffic very well, so I recommend that you use this function when you really need it, and to watchs on YouTube, such as the top 10 accidents.
Well, on this I, perhaps, will finish my article today. I hope you found it useful and you will not forget to subscribe to my blog updates. Good luck to you. Bye Bye!
How to distribute the Internet via Wi-Fi from a laptop in Windows 10
In my previous article on distributing Wi-Fi from a laptop, comments appear every now and then on the topic that these methods refuse to work in Windows 10 (however, some of them work, and the matter is most likely in the drivers). Therefore, it was decided to write this instruction (updated in August 2016).
In this article. A step-by-step description of how to distribute the Internet via Wi-Fi from a laptop (or computer with a Wi-Fi adapter) in Windows 10, as well as what to do and what nuances Pay attention if the described does not work: not the hosted network can be started, the connected device does NOT obtain IP addresses or works without Internet access, etc.
I draw your attention to the fact that this kind of “virtual router” from a laptop is possible for a wired connection to the Internet or for connecting via a USB modem (although during the check now I found out that I have successfully distributed the Internet, “Received” is also via Wi- Fi, in the previous version of the OS, I personally did not get it).
Mobile hotspot in Windows 10
In the anniversary update of Windows 10, a built-in function has appeared that allows you to distribute the Internet via Wi-Fi from a computer or laptop, it is called a mobile hotspot and is located in Settings. Network and Internet. The function is also available to be enabled as a button by clicking on the connection icon in the notification area.
All you need is to enable the function, select the connection to which the second devices will be given access via Wi-Fi, set the network name and password, and then you can connect. In fact, all of the methods that are described below are no longer required, provided that you have the latest version of Windows 10 and the supported connection type (for example, PPPoE distribution fails).
Nevertheless, if you have an interest or need, you can get acquainted with other ways to distribute the Internet via Wi-Fi, which are suitable not only for 10s, but also for previous OS versions.
Checking the possibility of distribution
First of all, run the command term as administrator (right click on the start button in Windows 10, and then select the appropriate item) and enter the command netsh wlan show drivers
The command prompt window should display information about the used Wi-Fi adapter driver and the technologies it supports. We are interested in the item “Hosted Network Support” (in English. Hosted Network). If it says “Yes”, then you can continue.
If there is no support for the hosted network, then first you need to update the drivers for the Wi-Fi adapter, preferably from the official website of the laptop manufacturer or the adapter itself, and then repeat the check.
In some cases, on the contrary, rolling back the driver to a previous version can help. To do this, go to the Windows 10 device manager (you can right-click on the “Start” button), in the “Network adapters” section, find the required device, right-click on it. properties. “Driver” tab. “rollbacks”.
Again, re-check the hosted network support: since if it is not supported, all other actions will NOT have any effect.
Share Wi-Fi in Windows 10 using the command line
We continue to act in the command line running as administrator. In it you need to enter the command:
Netsh wlan set hostednetwork mode = allow ssid = remontka key = secretpassword
Where remontka is the desired name of the wireless network (set your own, without spaces), and secretpassword is the password for Wi-Fi (set your own, and not less than 8 characters, and do not use Cyrillic).
After that enter the command:
Netsh wlan start hostednetwork
As a result, you should see a message stating that Hosted Network is running. You can already connect from another device via Wi-Fi, but it will not have access to the Internet.
Note: if you see a message stating that it is impossible to start the hosted network, while in the previous step it was written that it is supported (or the required device is NOT connected), try disabling the Wi-Fi adapter in the device manager, and then re-enabling it ( or delete it there, and then update the hardware configuration). Also try in the Device Manager in the View menu item to enable the display of hidden devices, then in the “Network Adapters” section, find the Microsoft Hosted Network Virtual Adapter, right-click on it and select “enable”.
To access the Internet appeared, right-click on “Start” and select “Network Connections”.
In the list of connections, click on the Internet connection (exactly the one that is used to access the Internet) with the right mouse button. properties and open the “Access” tab. Enable the item “Allow other network users to connect to the Internet and apply settings (if you see a list of home network connections in the same window, select the new wireless connection that appears after the hosted network starts).
If everything went as it should, and there were no setup errors, now when you connect from a phone, tablet or other laptop to the created network, you will have access to the Internet.
To later disable the distribution of Wi-Fi, in the command line as administrator, enter: netsh wlan stop hostednetwork and press Enter.
Problems and solutions
For many users, despite the fulfillment of all the above points, Internet access via such a Wi-Fi connection does not work. Below are some possible ways to fix this and understand the reasons.
- Try to turn off Wi-Fi distribution (I just indicated the command), then turn off the Internet connection (maybe to which we have allowed public access). After that, turn them on again in order: first, the distribution of Wi-Fi (via the netsh wlan start hostednetwork command, the rest of the commands that were before that are not necessary), then the Internet connection.
- After starting the distribution of Wi-Fi, a new wireless connection is created in your list of network connections. Right-click on it and click “Details” (Status. Details). See if the IPv4 Address and Subnet Mask are listed. If not, then specify it manually in the connection properties (you can take it from the screenshot). SIMilarly, if you have problems connecting second devices to the distributed network, you can use a static IP in the same address space, for example, 192.168.173.5.
- The firewalls of many antiviruses block public access to the Internet by default. To make sure that this is the reason for the problems with the distribution of Wi-Fi, you can temporarily disable the firewall (firewall) altogether and, if the problem disappeared, start looking for the corresponding setting.
- Some users turn on sharing for the wrong connection. It must be enabled for the connection that is used to access the Internet. For example, if you have a local network connection, and Beeline L2TP or Rostelecom PPPoE is launched for the Internet, then general access must be provided for the last two.
- Check if Windows Internet Connection Sharing is enabled.
I think you will succeed. All of the above has just been verified in conjunction: a computer with Windows 10 Pro and an Atheros Wi-Fi adapter, iOS 8.4 and Android 5.1.1 devices were connected.
Additional: Connectify Hotspot promises to share Wi-Fi with additional functions (for example, automatically start sharing at login) in Windows 10, in addition, in the comments to my previous article on this topic (see How to share Wi-Fi from a laptop ), some have the free MyPublicWi-Fi program.
You can distribute the Internet either via Wi-Fi, or via USB or Bluetooth. over, you can create several connections at the same time. For example, connect the iPad via Wi-Fi, and a stationary computer, and not having wireless modules, via USB.
When choosing how to distribute the Internet from iPhone to computer, do not forget about the data transfer speed. Wi-Fi provides sufficient speed for both comfortable surfing and downloading files. USB transfer speed varies by version. 2.0, which models 4, 4s, 5 and 6 work with, is much slower than Wi-Fi. But USB 3.0 and 4.0 demonstrate solid speed. Bluetooth of any of the existing versions is 2 orders of magnitude inferior to them.
Note that speed is based on the slowest device in the pair. Therefore, if you are using an iPhone 4s with USB 2.0 and the most modern laptop with USB 4.0, the data transfer speed in this bundle will still NOT exceed 480 Mbps.
Cellular data transmission is a power consuming operation. The phone battery will drain very quickly, so it makes sense to charge the phone immediately after turning on the modem mode.
Put the iPhone in tethering mode
Let’s try using the iPhone 5s as an example. First of all, you need to enable data transfer. This can be done in the settings. There you will see the item “Modem Mode”. You need to go into it and activate.
The first time you connect, a password will be automatically generated. It is required to be entered on all devices that will connect to the iPhone via Wi-Fi. If desired, the password can be changed. There is no risk of forgetting him, since he is not hidden by the system.
The password is not suitable should be too SIMple so that lovers of free Internet surfing could not use your network.
Agree to the offer to turn on Wi-Fi if you plan to distribute the Internet in this way. The listed actions may be enough for everything to work and the question of how to distribute the Internet from an iPhone to a laptop or PC was decided.
We have found for you instructions on how to connect the Internet via USB:
If you do not know how to distribute the Internet from an iPhone to a PC that has wireless modules, use USB. Let’s take a closer look at how to distribute the Internet from an iPhone via USB.
Plug in the wire and give the computer time to detect the USB device. The easiest way to do this is in Mac OS, for obvious reasons. For Windows 7 and 10, we recommend installing iTunes. In this case, there are no problems with iPhone detection.
A new element appears in the network connections section, which is activated in a standard way. If the hardware does NOT appear in the list, try restarting your computer.
Data transmission via Bluetooth loses to other options in terms of speed. But broadcasting the Internet in this way is almost as easy as distributing Wi-Fi to a computer from an iPhone.
To make a connection, you must:
- Enable iPhone data transfer mode.
- Activate bluetooth on both devices.
- Create a pair.
- Assign Bluetooth device as access point.
To create a pair on a Windows PC or laptop, go to the “Control Panel”. “Devices”. “Bluetooth”. In the list you need to select “iPhone” and click on the “Connect” button that appears next to it.
On the iPhone, you need to allow pairing, and on Windows, confirm that the code matches.
Now the connection is established, but the Internet is not working yet. You will need to select “iPhone” again in the list of devices and click “Connect via”. “Access point”.
If modem mode is not available
But it may also happen that the “Modem mode” item in the settings is inactive (highlighted in gray) or even missing. In this case, select the “Cellular” item in the settings and enable data transmission (“Cellular data”).
It is also helpful to go to the Data Options section. “Cellular data network” and scroll down the page to make sure that the APN, Username and Password fields are filled in and correspond to the currently used cellular operator.
Usually, ISPs automatically configure the Internet connection. But failures and non-standard situations are possible. If the listed fields are filled in or filled in incorrectly, you need to Get the actual parameters from the operator.
The appearance of iOS settings has remained almost unchanged over the years. Knowing how to distribute the Internet via Wi-Fi or USB from the iPhone 5s, you can easily figure out how to connect the most modern mobile gadgets from Apple.
Let’s figure out how to distribute Wi-Fi from iPhone to devices running different operating systems. First, turn on Wi-Fi on your PC or laptop.
In Windows 7 and 10, this can be done through the icon located on the taskbar. On laptops, turning on and off wireless devices is also possible using a dedicated switch or function keys. Which one depends on the model, so see the instructions for the laptop. You can also manage Wi-Fi from the Control Panel.
The situation is SIMilar in Mac OS. You can connect Wi-Fi through the icon on the top panel, or in system settings, in the “Network” section.
It’s easy to figure out how to distribute the Internet from iPhone to iPad, because they both work under iOS. After turning on data transfer on the phone, you just need to turn on Wi-Fi in the tablet settings.
SIMilar steps are required for Android tablets or phones.
After activating the modem mode, a network is created, which is visible in the list of Wi-Fi connections. The network name contains the word “iPhone”. Just select this network and after asking for a password, enter it.
There is no need to change the parameters of the created connection, everything should work fine with the default settings. If everything worked out, the top line on the smartphone will display the inscription: “connected devices 1”.
How to distribute the Internet from an iPhone: to a PC and laptop, via USB
The ability to transfer data appeared in the iPhone back in 2008. This is a very useful function, since you can distribute the Internet from an iPhone or Apple tablet with a SIM card to computers, laptops, and even to other phones.
This will require:
- Enable data transfer to iPhone.
- Connect devices to the created network in a suitable way.
Look also. Where will you find out how to distribute the Internet from an iPhone or iPad:
- Putting the iPhone in tethering mode
- If modem mode is not available
- Baud rate
- Connect devices
- By USB
- If it doesn’t work
Connect devices. If it doesn’t work
First, it’s worth checking if there is internet on the iPhone itself. If not, make a request for balance and available Internet traffic. Check if the parameters login, password, APN for the modem mode are specified.
- If iPhone does NOT share Wi-Fi, check if Wi-Fi is connected on both devices and if a new connection appears in the list on the computer. If there is a connection, you can go to its settings. Sometimes the problem of lack of Internet can be solved by setting the DNS values to 188.8.131.52. This is true for all connection options.
- If it is not possible to connect via bluetooth, it is recommended to check the availability and relevance of the Bluetooth module drivers installed on the PC.
- The problem with the iPhone NOT being seen in the list of USB devices is most often solved by installing iTunes and restarting the computer.
Can the mobile operator prohibit the use of the phone as an access point? Technically, it is impossible to track the activation of this mode. But on the side of the provider, non-specific traffic for mobile devices is clearly visible, including updates for operating systems or downloads from torrent trackers.
However, such control was relevant in those happy, but short times, when almost every operator had unlimited tariffs, which users quickly learned to use for all devices. Now you pay a certain amount of gigabytes per month. And how you use them. on one device or on several. your Personal File.
And, of course, if a problem occurs, you shouldn’t rule out hardware problems in the sending or receiving device. But before taking your iPhone or laptop to service, you need to make sure once again that all the connection instructions have been followed.
See also how to distribute Internet from Android phones:
How to distribute Internet from phone to computer via Wi-Fi
Now any modern phone is able to distribute the Internet to computers using Wi-Fi. This is done by creating a mobile access point on the phone, to which the computer connects and thus gains access to the Internet. In this article, we will demonstrate how this is done using the example of an Android phone.
Step # 1. Open android settings.
First you need to open the android settings. To do this, open the list of all applications and find there an application called “Settings”. You can also open the settings using the top curtain.
Step # 2. Open the “Other networks” section.
After opening the settings, go to the “Other networks” section. On some phones this section of settings may be called “” or something else. But, it will always be next to the Wi-Fi and Bluetooth settings.
Step number 3. Open the subsection “Modem and access point”.
Next, you need to open a subsection called “Modem and Access Point”. In some cases, this section may be called “Modem”, “Modem Mode”, “Access Point”, or “Access Point Connection”.
Step # 4. Turn on the access point.
Now you need to turn on the access point. To do this, move the “Portable Access Point” switch to the on position. On some phones, to enable the access point, you need to check the box next to the corresponding item.
After turning on the Wi-Fi hotspot, a window may appear asking you to confirm the action. Here we just click on the “Yes” button.
Step number 5. Look up the password from your access point.
In order to connect to the access point on your phone, you need to know the password. To do this, after turning on the access point, open the “Portable access point” section.
Here you can find out the name of your access point (its SSID), as well as the password.
Step number 5. Connect to Wi-Fi using a computer.
After the access point is created, you can start connecting your computer. To do this, click on the Wi-Fi icon on the taskbar.
After that, a list of available Wi-Fi networks will appear on the screen. Among them will be the access point created by the phone. Select it and click on the “Connect” button.
After that, a window will appear asking you to enter the security key. We enter the password from our access point on the phone.
That’s all, if the password is correct, then the computer will connect to the access point and the Internet should work.
Instructions: how to distribute Internet from phone to laptop
Turn on the Internet on your Android phone.
The first thing you need to do is turn on the internet on your Android device. Swipe at the top of the screen and tap on the Settings icon, which looks like a small gear.
In the settings menu, find the “Wireless networks” section and click on “SIM cards and mobile networks”.
Find the Data Transfer option and make sure its toggle is turned on.
Connect Android phone to computer using USB cable.
Now use the original USB cable to connect your smartphone to your computer or laptop.
If you are connecting your phone to a computer, then it is advisable to use the USB port on the back. They are generally faster and more reliable.
Turn on USB tethering on Android smartphone.
After you have connected your phone to your computer, go to the “Settings” menu, the “Wireless networks” section and click “”.
Here you will see an option called USB tethering. Turn it on.
Wait a couple of minutes for the computer to install the necessary drivers.
If you did NOT distribute the Internet from your phone to your laptop before, then your computer will start downloading and installing drivers, which are necessary for the USB modem to work. This process can take several minutes.
That’s all! Internet access should appear on your laptop or computer. Open your web browser and go to any site.
How to distribute internet from phone to laptop via USB cable
In this article, we want to tell you about an interesting feature on Android smartphones called USB tethering. This function allows you to distribute the Internet from your phone to a laptop via a USB cable.
It is one of the easiest and most reliable ways to access the Internet on your computer, laptop, 2-in-1 tablet when you are on the go. If you do not have access to a free public Wi-Fi network, but your phone has a generous data plan, then you can distribute the Internet from your phone to your laptop via a USB cable.
We have prepared detailed instructions with pictures so that you don’t have any problems. Please note that we used a Xaiomi Redmi Note 3 Pro smartphone running Android 6.0 Marshmallow. Some menu items may be different on your mobile device, but most of the settings should look and work the same.
Now you know how to share the Internet from your phone to your laptop using a USB cable. This method is especially good because it does not need a Wi-Fi receiver, which is often not available on stationary computers. In addition, sharing the Internet from phone to laptop using Wi-Fi consumes a lot of mobile device battery.
Do you find this feature useful? Do you often use a USB tethering? Let us know in the comments below.
How to distribute the Internet via Wi-Fi from an ASUS phone instruction
Your smartphone supports high-speed Internet and you want to share the Internet from your phone with other devices and don’t know how? On this page you will find detailed instructions on how to distribute the Internet via Wi-Fi on Asus to another phone, tablet, computer, laptop, TV and other devices.
In our example, we will show how to share mobile Internet via a Wi-Fi hotspot on the Asus ZenFone Max Pro, perhaps the information will be suitable for other Android devices.
Let’s see how to distribute the Internet via Wi-Fi from an ASUS phone.
Pull down from the top edge of the screen to open the quick access panel to various useful smartphone functions. In the panel that opens, select the “access point” icon. If there are access point icons on the menu that opens, then you need to scroll by pulling the panel from the right edge of the screen to the left, and possibly vice versa. We need to activate by clicking on this icon, see below in the picture where I have selected the necessary items. Some models may not initially have such an item, usually such an item appears in the quick access panel after the first activation of the Wi-Fi hotspot in Android settings.
Now you can connect from another device, for example, from a laptop, via Wi-Fi to an Asus smartphone and use the Internet from your phone. But as you know, in order to connect to the Internet with Asus ZenFone, you also need to know the phone’s access point name and password.
Open “Settings”, you can click on the gear icon from the same quick access panel.
In the settings, select the “Network and Internet” item. Look at the screenshots attached below where the desired one is highlighted.
In the menu that opens, the network and the Internet, select the item “Access Point and Modem”.
Now, to activate the access point, you need the item “Wi-Fi access point” opposite which, move the slider and turn on.
To see the name of the access point and the password for connecting to Asus, select the item “Setting up the Wi-Fi access point”. In the window that opens, you will see both the password and the name of your phone’s access point. If you wish, you can change the name and password.
Ways to transfer the Internet from phone to computer
There are actually only three Internet transmission options. At the same time, their number may be reduced depending on the technical equipment of the computer and the accessories available, allowing such a transfer. So, how to transfer the Internet from a phone to a computer?
Method one. With a cable that connects your phone and computer. In this case, there is a need for additional devices or Special requirements for the computer, in addition to the presence of a connection cable.
Method two. Distribution of the Internet from the phone using Wi-Fi. But there are some peculiarities. The phone must have a Wi-Fi distribution option, a computer. Have a built-in Wi-Fi adapter, or such an adapter must exist as a separate device.
Third way. This is using a BlueTooth connection. The restrictions that are imposed on this method are the same as in the previous case. The choice of how to transfer the Internet from the phone to the computer will largely depend on your preferences, as well as the technical features of the computer and the phone. In the future, let’s consider each of THESE methods separately.
Internet transmission over cable
The first thing to do. This is to connect your phone to your computer using a cable. Worth noting that some phones use the same data connector and battery charging. Therefore, it is important to have a USB cable to connect your phone to a computer, which is not always included in the kit. In the future, it is necessary for the PC to detect your phone. Depending on the operating system installed on your computer and the type of phone, this operation may differ on different systems.
But the essence of this action is the same. The computer needs to PROVIDE drivers for this phone model, thanks to which it will be able to transfer data from the phone to the computer and vice versa. Some systems are provided with automatic detection of drivers in the operating system, and some cables have a CD with the corresponding software. But most often you have to look for drivers on the Internet.
After the phone has been identified, it is necessary to perform operations on it, shown in the photo.
You need to go to the phone settings and select the “other networks” tab. In it, select “USB-modem”. And after that, the Internet on the computer appears almost immediately.
How to transfer the Internet from a phone to a computer via Wi-Fi
This method of distributing the Internet is the most popular and is most often used by computer users. The advantage of this method is the absence of cable connections, and there is no need to search for drivers. In addition, most modern smartphones can distribute the Internet from the phone, while the phone acts as an access point. Any modern laptop has a Wi-Fi adapter. Therefore, first the access point is turned on on the phone, and if a secure connection is planned, a password is set on it.
After that, Wi-Fi is turned on on the computer, the Wi-Fi network of the phone is determined. The computer asks for a password, after entering it, the Internet is already on your computer.
How to transfer the Internet from a phone to a computer in modern conditions
Nowadays, many people think that life does not exist without the Internet. Therefore, in modern conditions, Wi-Fi routers are installed in public places, which provide visitors to this place with free distribution. But what if you need to do an urgent job and there is free internet nearby? How to solve this problem? Many computer users have telephones, which have installed provider packages that provide not only voice communication, but also the Internet. But how to transfer the Internet from a phone to a computer?
Sharing the Internet using a BlueTooth connection
Using a BlueTooth connection is NOT that popular among computer owners. This is explained by the short range of a reliable BlueTooth connection, on the one hand, and on the other. This type of connection is less commonly used than Wi-Fi. With this type of connection, the phone acts as a wireless BlueTooth modem, its setting is very SIMilar to setting up a modem connected via a USB cable. Only in this case BlueTooth modem is selected in the phone settings.
Bypassing restrictions on the distribution of the Internet over Wi-Fi
This year, tariff plans with unlimited mobile Internet caused a great stir. MTS, Beeline, MegaFon, Tele2 and Yota have SIMilar offers. Tariff plans really anticipate the absence of restrictions on speed and traffic (at least, as the operators say so). However, there were NO restrictions at all. The biggest disadvantage of these plans is that they are only for smartphones. Also, it is not possible to use the phone as a WI-FI access point and there is a restriction on the use of file-sharing networks. Many subscribers are interested in whether it is possible to bypass these restrictions? If you make some effort, you can bypass restrictions on the distribution of the Internet over Wi-Fi, use a SIM card in a modem and download files from torrents.
As part of this review, we will look at all the ways to bypass restrictions on the distribution of the Internet over Wi-Fi (TETHERING). It is difficult to single out one single method, so you will have to independently determine the most suitable option for you. The guide is relevant for all tariffs with unlimited mobile Internet, which is characterized by the presence of a restriction on the distribution of the Internet via WI-FI (“# can be ALL” Beeline, “infinitely black” Tele2, “MegaBeslim” MegaFon, postpaid tariffs Beeline, Yota tariff plan for a smartphone).
All ways to bypass restrictions on the distribution of the Internet
On the Internet, you can find many instructions for bypassing the restrictions on the distribution of the Internet. Unfortunately, not all of them are relevant and most do not allow achieving the desired result. We checked all the options and identified the most effective ones. With their help, you can bypass the restrictions on the distribution of the Internet via Wi-Fi, but we cannot guarantee a 100% result.
We will consider the following methods for bypassing restrictions on the distribution of the Internet over Wi-Fi:
- Change IMEI on the dispensing device;
- Changing / fixing the TTL value (TTL Editor and TTL Master programs)
- Editing the host file on the computer.
Let’s consider each technique separately (you can apply them all). If you have any difficulties, ask questions in the comments. We also recommend visiting the Relevant sections of the forum w3bsit3-dns.com, where there are many recommendations for bypassing restrictions on the distribution of the Internet.
Change / fix TTL value
The TTL number stands for the lifetime of traffic packets. By default, for most operating systems on smartphones, it is 64. When connecting to the operator’s network, the device sends it the default value. If a modem or router is used to connect to the Internet, the TTL value is reduced by one unit, as a result of which the operator recognizes that the subscriber is using a SIM in a device other than a smartphone. The same goes for using the phone as a Wi-Fi hotspot (the smartphone acts as a router and the TTL is reduced).
Bypassing restrictions on distributing the Internet over Wi-Fi by changing the TTL is quite real. You need to change the value in such a way that packets from other devices (possibly non-rooted) in case of loss of one from TTL have the same value as TTL for the “default” donor. Devices running on iOS and Android operating systems have a TTL equal to 64 by default. To distribute the Internet, the donor must be assigned TTL = 63.
Changing / fixing the TTL value is possible manually and with the help of special programs. First, consider a method that involves changing the TTL using programs.
Let’s start with the TTL Master program (previously the program was called Yota Tether TTL). For the program to function, root user rights are required. Read how to get root rights in a separate review. Using the program, you can change the TTL value in one click. You can download the utility on Google Play. The free version is enough to change TTL. Instructions for using the program are NOT required, since everything is already very clear. After starting the application, your current TTL will be indicated, as well as TTL, which must be specified in the appropriate field. Enter the required TTL and click on the “Apply” button. Now try to distribute the Internet via Wi-Fi from your smartphone. TTL Editor works in a SIMilar way.
You can change TTL on Android without using the above programs (root rights are required).
To change TTL, follow these steps:
- Turn on airplane mode on your phone;
- Install and run the ES Explorer application (you can use another one with SIMilar functionality). Go to the following path: proc / sys / net / ipv4, find there a file named ip_default_ttl, open it and change the value from 64 to 63. Do not forget to save your changes before exiting the application;
- Disable airplane mode for the smartphone to connect to the network;
- Turn on Wi-Fi sharing and you can connect your phone or tablet to the network.
If you need to connect the computer to the phone, then in addition to the listed actions, you need to perform the following manipulations:
- On the computer, press. start. Execute. In the line we write regedit;
- The registry opens, let’s go. HKEY_LOCAL_MACHINE \ SYSTEM \ CurrentControlSet \ Services \ Tcpip \ Parameters;
- In the right window, right-click. Create. New DWORD parameter (32 bits). We call it “DefaultTTL”;
- Right click on the new parameter. Edit. On the calculus system, we put a point “decimal”. In the field, write the value (64);
- Save everything and restart the computer.
The above instructions are valid for the Android operating system. If you need to change TTL to another OS, on a modem or router, then follow this link and use the appropriate manual.
Editing the host file on the computer
The hosts file is designed to match domain names (sites), which are written using characters and the corresponding IP addresses. It is necessary to edit this file in order to block the resources through which the operator detects the distribution of the Internet. Unfortunately, it is physically impossible to assemble a universal hosts file, so install a traffic analyzer and track on which resources the operator detects the distribution. A lot of useful information on editing the hosts file can be found by clicking on the link above (w3bsit3-dns.com.Ru).
The hosts file is located in the folder with the Windows operating system, usually this is the “C” drive on the user’s computer. For quick access to the file, press the keyboard shortcut “Windows” “R”. This will open the Run window. In the “Open” field, enter the command:% systemroot% \ system32 \ drivers \ etc and click the “OK” button. Next, the “etc” folder will be opened, in which the “hosts” file is located.
Change IMEI on the dispenser
If you want to use a SIM card in a modem or distribute the Internet using a Wi-Fi router, you need to change the IMEI on the distributing device. You need to use IMEI from a smartphone running on windows operating system. You can use any other IMEI, but then the risk increases that after a while all your efforts will be in vain. Traffic to windows resources from a computer does not raise suspicion, since mobile devices running on the Windows operating system go to approximately the same resources.
Also note that the IMEI you are going to register in your device, and should not be registered in the same network. That is, you cannot connect to the network SIMultaneously from two devices with the same IMEI. If you can’t find the IMEI from the windows background, you can generate it. Download IMEI Generator WinPhone here.
There are two ways to change IMEI:
- Through engineering mode;
- Console (Terminal Emulator).
Which method is more convenient for you to decide. We will provide detailed instructions for both options.
Change IMEI through engineering mode:
- We dial in the phone: ###, after which the engineering mode opens (engenieer mode)
- Go to the Connectivity tab.
Choose: CDS Information Radio Information Phone 1,
- Above the AT line, add: EGMR = 1.7, “your_IMEI”;
- To change IMEI to the second SIM card (if any), repeat the previous step, but write already: EGMR = 1.10, “your_IMEI”;
- Press the SEND AT button and reboot.
If nothing worked, then try putting a space after AT.
There is another way to change IMEI, which involves using a terminal emulator. The emulator works SIMilarly to the Windows command line. The utility can be downloaded for free from Google Play. Find the Terminal Emulator for Android app for money slot machines with qiwi withdrawals and install it on your smartphone. A number of commands that must be executed in the emulator to change the IMEI may differ depending on the phone model. In most cases, you need to enter the following code:
If you have a two-SIM device, then to change the IMEI to the second SIM you need to add:
If you need to change the IMEI of your router or modem, then read a separate article.
Bypassing restrictions on distributing the Internet over Wi-Fi is quite feasible, but no one can guarantee that the result obtained will last for a long time. We have repeatedly tested various ways to circumvent the restrictions and most of them stopped working after a while. You can try the methods described in this article or find other ways on the forums, but the operators will always be Make sure that the restrictions set by them are problematic to get around.
If you know of working schemes that were not mentioned in the review, share them in the comments.
http://smartphonus.com/%D0%BA%D0%B0%D0%BA-%D1%80%D0%B0%D0%B7%D0%B4%D0%B0%D1%82%D1%8C- % D0% B8% D0% BD% D1% 82% D0% B5% D1% 80% D0% BD% D0% B5% D1% 82-% D1% 81-% D1% 82% D0% B5% D0% BB % D0% B5% D1% 84% D0% BE% D0% BD% D0% B0 /