How to Remove Buttons From Laptop Keyboard

The easiest way is Boot Menu

Power button problem is a common laptop malfunction. The key has sunk, does NOT respond to pressing for a long time, after switching on it immediately goes out, blinks. There are many reasons why the button broke. Our task is to start the device without it.

To start the laptop, use the boot menu (boot menu). Its main purpose is the ability to select a device for loading windows. A file can be used on a hard disk, flash drive, disk.

remove, buttons, laptop, keyboard

To enter the boot menu on laptops there is a hardware button.
You can find it on the models of the following manufacturers:

  • Sony;
  • Lenovo;
  • Asus;
  • Acer;
  • HP.

The location differs depending on the model. On some it is on the side, on the second. under the keyboard, above it.

Samsung, dell, desp button is missing.

  • Look at the body of the device and look for the Utama button. If not, read the instructions. And suddenly they missed;
  • Press the button. If it is hidden in the body, use a pin or needles to press it. One click is enough;
  • A small blue window will appear. Select normal operation mode. normal startup, will be called enter.

There are several ways to enable sleep mode:

  • Press “start”, then. “sleep”;
  • Go to PC settings, call it “systems”, select “power and sleep mode”, determine the time when the inactive laptop falls asleep;
  • Go to the control panel, where to find the “power supply”, set the settings for switching to sleep mode.

To turn off sleep mode, use the mouse or any keyboard key.

Setting up the exit from the keyboard is done as follows:

  • Open the device manager;
  • Select the “keyboard” menu item;
  • Press the right mouse button, select “properties”;
  • Go to “power management”;
  • Check “allow this device to wake up the computer.

Now you can wake up the laptop from sleep mode by pressing any key on the keyboard. They use a built-in as well as an external keyboard connected via usb.

Another option to make the computer turn on is to use the mouse.

The setting is similar to the keyboard;

  • Press start;
  • Open the device manager;
  • Select “mice and other devices”;
  • Right-clicked to go to properties;
  • Select “power management”;
  • Grant permission to turn off standby.

We start the laptop with a faulty power button Using our method and keyboard

Hello dear readers! A common problem in laptops is the power button stops working. It flashes, does not turn on, and does not respond to pressing. To the service immediately after a breakdown is detected It is not always possible to take the device away. There are several ways to turn on the laptop without the power button from the keyboard. Each of them will be described in detail by our article.

  • The easiest way is Boot Menu
  • Another option is Power ON function
  • The most difficult way is to start from the motherboard
  • conclusions

The most difficult way is to start from the motherboard

Configuring the entrance to a laptop with a disabled power key through the BIOS is an easy-to-configure, convenient method for further use. The only drawback is that in order to use it, you must first log in on a laptop. A hardware button is used for this. If it is absent, it is launched from the motherboard.

The method requires disassembling the case.

You need to do the following:

  • Disconnect the laptop from the network;
  • Take out the battery;
  • Remove the bottom panel of the housing. Carefully inspect the bottom of the laptop, Remove the screws. If this is not enough, draw a thin plastic knife or plastic card around the perimeter of the device at the junctions of the lower and upper parts of the case. If you find the latches, gently squeeze;
  • Find the terminal block on the motherboard. The surface says jfp1 or f-panel;
  • Find pwr sf /. or pwr;
  • Closed contacts with a screwdriver;
  • Assemble the laptop.

To disassemble the laptop with your own hands, it is difficult to find contacts on the motherboard. What should a beginner do? It’s easier to close them on a non-working button.

  • Remove the panel above the keyboard. If it is absent, remove the keyboard. Dismantling begins from above. Use a screwdriver or knife to sequentially squeeze the latches, lifting the released corners;
  • Find the board that contains the contacts. Enough Trace where the trains lead;
  • Check if the cable is working properly by disconnecting it and locking the contacts. In case of malfunction, replacement is required;
  • If the cable is working properly, the contacts are closed with a screwdriver, a thin metal object. Instead, they remove the button, bring the closure terminals outward using thin wires, cables from an old PC;
  • Assemble the laptop. Snap the fasteners, install the keyboard, replace the battery.

Another option is Power ON function

The next method requires changing the settings in the BIOS.

To enter BIOS, press F2 or del. These keys work on most laptops, netbooks, including ASUS. On Lenovo, Acer can be used f1, on Sony. escf2.

But these keys are useless if the laptop won’t turn on.

In this case, enter the BIOS like this:

  • Press the hardware button;
  • Included in the boot menu;
  • Choose BIOS setup.
  • Find the power (power management setup) menu item
  • Go to power settings. power on (power on by ps2 kb / ms)
  • Specify the way how the laptop should turn on. If you select “any key”, the activation will be performed using any key. Pressing “hot key” selects any key combination. This option is not available for all PCs;
  • Press f10, save and exit.

There are several ways to forcibly turn on laptops with a disabled power button. The most difficult and time consuming one requires disassembling the laptop, closing the contacts. We advise only professionals to use it. We recommend that everyone else enter the boot menu at the first attempt using an additional button. In the BIOS, configure the inclusion of the laptop from pressing any key or combination, configure the sleep mode, the ability to exit it from the keyboard. As soon as possible, go to the service, repair the malfunction.

How to remove buttons from a computer keyboard? Cleaning of dust and debris

If crumbs become the prerequisite for clogging, then it will be necessary to remove the buttons and clean them of debris. First you need to make sure the keyboard is disconnected from the computer. You should also take several photos of your keyboard, so that later there will be no problems with the location of the keys, so as not to confuse them in places.

How to remove buttons from the keyboard? We take a knife and carefully pick out the keys on the keyboard. You need to act slowly so as not to break the mount. It is better to hold the button with your hand so that it does not fly far away. After removing one button, you will understand how best to proceed. This process requires the person to be careful not to harm the keyboard. You also need to have at least an hour of free time.

After removing all buttons, you can clean everything with a vacuum cleaner. Next, wipe the surface with a damp cloth. This will still get rid of the dust. After completing all the steps, you can start assembling. To do this, you need to put the button in its place so that it falls into the groove and presses. As soon as you hear a click, you can release the button. In order not to confuse the location, use the photo that was taken during the disassembly of the keyboard. As soon as you collect it, you can start operating.

How to remove buttons from computer and laptop keyboards?

Every person who uses a computer will sooner or later face a problem when his keyboard gets clogged and because of this it will not work well. Of course, this is inevitable, since everyone likes to drink tea near the computer or eat while watching their favorite TV series. Crumbs, spilled liquid have a very detrimental effect on keyboard performance.

If you’ve been using your keyboard for a long time, and it starts to junk, then most likely it is clogged and it’s time to clean it. A professional will take about 300 rubles for his work, but you can NOT fork out, but clean it yourself. Many people, when they start cleaning the keyboard, ask themselves: “How do you remove buttons from the keyboard?” Let’s look at this.

How to remove a button from a laptop keyboard? Cleaning of dust and debris

The keyboard in a laptop can also become dirty and sticky. How to clean it from debris? It is also necessary to remove the buttons and use a vacuum cleaner to remove all the debris. In a laptop, removing the buttons will be a little more difficult. How is it shown? Let’s take a look at how to remove buttons from the keyboard.

We also take a knife and carefully pry the button. It should rise to the very tip of the knife. After clicking, you can be sure that she popped out of the latch. Unfortunately, it all just seems simple. In fact, you need to study very carefully how to remove buttons from the keyboard. After removal We clean from debris and dust.

READ  Which Operating System To Choose For Laptop

After cleaning, you must put the keys in place. There are 2 latches that you need to carefully hit. We put the button and press, then release it with a click. Do this with all the buttons.

Cleaning up liquid spills

If you spill tea or coffee on the keyboard, then you should approach cleaning more thoroughly. In this case, you must immediately disconnect the keyboard from the computer and drain all the liquid. Next, you need to disassemble the keyboard. So, remove the buttons and soak them in plain water to remove the remaining sticky liquid. And the place where the buttons stood must be thoroughly wiped with a damp cloth. If you are sure that the liquid has missed the inside of the keyboard, then you can start assembling.

Perhaps, after assembling the keyboard, some keys became stuck, then you need to continue cleaning. To do this, turn the keyboard over and remove the screws. Neatly separate the top and bottom. Of course, there is 100% confidence that you will be able to fix the keyboard, but it’s worth a try. You should NOT completely disassemble everything. You need to gently wipe the areas where the liquid might have been with a damp cloth. After that, it is better to assemble the keyboard and test its performance.

Cleaning up liquid spills

On a laptop, the keyboard is quite difficult to recover from spilled liquid. As soon as such an incident occurs, you need to turn off the laptop and drain all the liquid. Further, it is better to take the computer to a professional, since an inexperienced person can only harm a laptop.

Home keyboard repair

To carry out restoration work, you will need the following tools:

  • Insulin Syringe Needle.
  • Soldering iron, preferably thin.
  • Simple pliers.
  • Small pressure.
  • Mounting knife.

You can also get by with a more modest set of accessories:

  • Brush brush hair.
  • Sewing needle.
  • Lighter.
  • Pliers or strong tweezers.
  • Technical superglue.

We start repairing:

  • Take the fastener with the broken metal leg and install it on the workplace.
  • We take a needle in one hand, and a thin soldering iron in the other.
  • The needles must be applied to the damaged area. It is desirable that it goes somewhere 2 millimeters on the part of the part that was not damaged.
  • We warm up the needle with a soldering iron and carefully melt it into the plastic surface.
  • Cutting pliers Get rid of excess plastic. Most importantly, don’t overdo it.

Putting the keys back in place

We hope that during the disassembly of the device, no fastening elements were damaged, since we will need them in the same state:

  • We take the key and put it on its Seat. Align the path and push the component a little until it clicks.
  • If the buttons do not respond or refuses to snap into place, then chances are that you have assembled the fastening parts incorrectly. Recheck your work.

Something broke? Do not rush to give the device to the workshop, because you can try to fix the problem with your own efforts.

Alternative way

If you do not have the tools that are used in the previous method, then you can safely use the alternative repair instructions:

  • Take a needle and heat it with a lighter.
  • Next, you need to make a groove, into which the villi from the comb will be inserted freely (you can use something like that).
  • Threading the villi and fixing it with a small amount of superglue.
  • We wait from forty minutes to an hour and check the part for performance.

Mountings

We figured out how to remove the keys from the keyboard, but how to remove the mounts themselves? We continue to consider the option in which the mounts are located at the top of the key.

You have to do the following:

  • We take the same knife and insert it between the two component parts of the fastening element. Place the blade slightly lower or higher “mustache”.
  • Bend the inner part of the component inward and slightly downward in order to “mustache” came out of the groove and turned out to be lower than the part of the mount that is external.
  • The mounts are detached, which means they can be pulled out.

If everything is clear with how to remove the keys from the laptop keyboard, then how to return them to their place?

Returning the mounts to the keyboard

If you followed this method, as described above, then the assembly takes place in reverse order. It may, of course, happen that the parts of the mountings are messed up with each other, then it is best to assemble “constructor” in hand, and only after that (not without the help of a good old clerical knife) mount ready “swing” in metal mounts that are located on the keyboard surface.

If both parts completely enter each other in a closed state, then you are on the right track.

What to do?

First, you need to prepare a small set of tools: a stationery knife, a nail file or something similar.

Before getting down to business, let’s talk about some of the key structure features. The buttons have mounts on which they are fixed, and the mount itself consists of two parts. These parts are connected by small “mustache”, that come out of the back of the mount and are inserted into the groove. This connection allows the buttons to move freely, otherwise pressing would be problematic.

The best solution would be to first remove the vertical mounts, but before that you need to determine the location of the side of the button on which these mounts are located. For this:

  • Just bend the key slightly on one side and try to look under it.
  • If we don’t really look at it, we just start bending the key on each of its sides until it loosens and does NOT unfasten.

Often the grooves are located at the top of the button, so we will consider this particular option:

  • Take a utility knife and insert it under the button (on the right side).
  • Further, making rotational movements clockwise.
  • These actions should help you unfasten the key, you just have to pull the component a little to the side, and it seems to be removed.

Have you noticed that clouds of dust literally accumulated under the keyboard buttons, does not mean crumbs and other debris? Are you going to clean up all this mess? Sounds pretty simple, if you, of course, disassembled it before. Didn’t you understand? Then you can run into some difficulties here if you do not have an idea of ​​the process. How to remove a button from a laptop keyboard? Let’s find the answer to this question together.

Well, now you Not only know how to remove buttons from your HP laptop keyboard (and other models), but you can also repair damaged mounts. Improve your skill and DO NOT lose vigilance during any manipulation of the technique!

How to remove keys from acer laptop keyboard

Sometimes there are times when you need to remove the keyboard. This can be a trivial cleaning, and cases when something was spilled on the keyboard, and a trivial replacement of the keyboard with a new one. Keyboards are standard in most cases and keyboards from one model can easily match another. The price of keyboards ranges from 30 to 150

Warning: Removing the keyboard is a rather complicated procedure. If you doubt your abilities, it is better to entrust this work to specialists. The author does NOT bear any responsibility for your actions. You do everything at your own peril and risk!

Keyboard mounting description

In many laptops, in particular, from the Acer Aspire line, the keyboard is held by latches, which can be included in the case:

Acer Aspire 5920 has 4 such latches on the top and two on the sides.

Note: Some notebooks may not have latches. To remove the keyboard, you will have to remove the upper front panel above the keyboard

Let’s proceed directly to removing the keyboard. To do this, slide the upper left latch with a screwdriver and slightly lift the edge of the keyboard. To do this, you can pry it with a needle or gently pull the keys “Esc”, “

“. If your keys suddenly fly off, THIS video shows how to put them in place.

Then we slightly raise the edge with a needle

And press the second latch

We move the needles to the place of the second latch and slightly raise

When the third latch is released, you can already hold the keyboard with your hand

Next, release the fourth latch and pull out the keyboard

The keyboard is connected to the laptop with a ribbon cable

To remove the train, you need to return the black frame up

This is what the keyboard looks like:

If, when working with the keyboard, it bends slightly, then this can be corrected by placing thin napkins under it

That’s probably all

If after reading this material you still have questions. ask them in the forum.

Best regards, the author of the material is Andrey Tonievich aka FuzzyL. The publication of this material is permitted only with reference to the source and with an indication of the author.

The owners of laptops periodically need for various reasons, whether it is cleaning the laptop keyboard, or, as I often did, the child picks out the key in the laptop, remove the buttons or vice versa, install the key in its place.

For this, in general, a simple procedure, we need a screwdriver with a thin flat blade.

To remove the letter key, press down the lower part with the index finger, and in the upper part from the side, gently push the screwdriver into the place where the fasteners of the latch snap into place.

This procedure will not allow the key to bounce far, and the latch mechanism itself will remain in place in the assembled state, which in the future will allow you to install the button in its seat without any effort.

READ  How to Connect a Phone Screen to a Laptop

In the photo, the key almost flew away.

Here is the button retention mechanism.

If the button clicked, but remained in place, then we need to pick it up and pull it up.

All keys in laptops are removed in a similar way, except for wide keys. “space” and “shift”.

To install the keys back into the laptop keyboard, Install it in its seat and push it down slightly with your finger. With a light click, the key snaps into place.

Wide keys such as Shift, Enter and others are removed in a slightly different way. Since the keys are wide, to avoid distortions when pressed and to distribute the forces evenly, a metal rocker is installed on the back of the keys and there are two latches.

This metal bracket is found on all large keys. This allows pressing even the very edge of the key to distribute the pressure across the entire key.

Removing such a key is somewhat different from conventional buttons. To do this, you need to bend it at the top and look into the gap formed, advance a screwdriver and snap off both latches.

Then slide the key gently upwards and thus it is removed.

Large keys are attached with two latches.

You won’t be able to move the space bar like that, because the key is very long and there are two brackets. Therefore, they need to be snapped off both, top and bottom.

Thus, all keys in the laptop are removed: space, inter, enter, ALT, CTRL, Enter Tab, Shift, Caps Lock, Esc, Fn, Delete, Fn Lock, Home, End, Insert, PgUp, PgDn.

This is what the laptop keyboard looks like with all the buttons removed.

The owners of laptops periodically need for various reasons, whether it is cleaning the laptop keyboard, or, as I often did, the child picks out the key in the laptop, remove the buttons or vice versa, install the key in its place.

For this, in general, a simple procedure, we need a screwdriver with a thin flat blade.

To remove the letter key, press down the lower part with the index finger, and in the upper part from the side, gently push the screwdriver into the place where the fasteners of the latch snap into place.

This procedure will not allow the key to bounce far, and the latch mechanism itself will remain in place in the assembled state, which in the future will allow you to install the button in its seat without any effort.

In the photo, the key almost flew away.

Here is the button retention mechanism.

If the button clicked, but remained in place, then we need to pick it up and pull it up.

All keys in laptops are removed in a similar way, except for wide keys. “space” and “shift”.

To install the keys back into the laptop keyboard, Install it in its seat and push it down slightly with your finger. With a light click, the key snaps into place.

Wide keys such as Shift, Enter and others are removed in a slightly different way. Since the keys are wide, to avoid distortions when pressed and to distribute the forces evenly, a metal rocker is installed on the back of the keys and there are two latches.

This metal bracket is found on all large keys. This allows pressing even the very edge of the key to distribute the pressure across the entire key.

Removing such a key is somewhat different from conventional buttons. To do this, you need to bend it at the top and look into the gap formed, advance a screwdriver and snap off both latches.

Then slide the key gently upwards and thus it is removed.

Large keys are attached with two latches.

You won’t be able to move the space bar like that, because the key is very long and there are two brackets. Therefore, they need to be snapped off both, top and bottom.

Thus, all keys in the laptop are removed: space, inter, enter, ALT, CTRL, Enter Tab, Shift, Caps Lock, Esc, Fn, Delete, Fn Lock, Home, End, Insert, PgUp, PgDn.

How to remove a laptop key and their features

Compared to older devices, modern keyboards are equipped with flat keys. over, almost all modern devices have a keyboard of an identical design. It will not work just like that, the key will NOT work, most likely just Break the fastening mechanism.

Before removing the laptop key, you need to prepare a suitable tool. Ideally, it is better to find a flat screwdriver with a curved end, with its help it is much easier to work with the key latch. It is also worth preparing a few toothpicks for more subtle actions.

How to remove a key from an asus laptop space bar

Using the method presented above, you can remove all the keys of the laptop except for the space bar and shift. In such keys, the fastening system is somewhat different, and, accordingly, they are removed in a different way.

As you know, the space bar has an impressive size. Therefore, it is fixed not only by the antennae, but also by the latch, which is located along the entire length of the button.

It is necessary to act very carefully and without sudden movements. To do this, we will use the screwdriver that we previously used to detach the standard keys. Further, in order to remove the key from the asus laptop and NOT damage it, we proceed as follows:

  • Primarily disconnecting the metal amplifier on the left side of the space bar,
  • Further on the right side,
  • Now remove the metal amplifier from the bottom of the spacebar, move from left to right.

Having released the amplifiers, it remains to remove the antennae from the grooves. To do this, we proceed in the same way as with ordinary keys.

Cleaning the keyboard

As you know, while using a laptop, a huge amount of dust and dirt accumulates in the keyboard of the device. All this negatively affects the performance of the keys. In connection with this, many users are interested in how to remove a key from a lenovo laptop in order to carry out the necessary cleaning. It was already presented above how to remove the necessary keys, and all dust and dirt are removed with a vacuum cleaner at minimum power. Particles that remain after cleaning with a vacuum cleaner, Remove with a toothpick or cotton swab.

Alternatively, you can rinse the keys in soapy water to remove any adhering dirt from them. This moment is especially relevant when the keys are light and all the dirt is very noticeable.

How to remove keys from laptop keyboard

Before starting the removal procedure, it is necessary to turn off the device and remove the battery, thereby eliminating the possibility of a short circuit. It is also most convenient to start from the bottom of the keyboard. All manipulations must be performed with extreme caution and without unnecessary effort. Adhering to THESE principles of problems with how to remove keys from the keyboard of an asus laptop will not.

The button is fixed by three or four plastic tendrils in fixed and movable grooves. Primary Pay attention to the fixed grooves. To do this, slightly lifting the button and see where they are located. They are often found at the bottom.

If you just take and pull the key up, then the antennae-shaped mounts are guaranteed to break. Therefore, in order to know how to remove the keys from the laptop keyboard, proceed as follows:

  • Curved end prying the bottom edge of the button,
  • Carefully remove the latch antennae from the grooves,
  • Presses is necessary in the middle of the distance between the tendril,
  • The antennae will come out of the grooves and the bottom of the key will be free,
  • If the key is small, then the moment the bottom part is released, it will completely detach from the keyboard.
  • If the button did NOT disconnect on its own, then putting a screwdriver under the upper antennae and pulling out of the slots.

Now every user knows how to remove a key from acer laptop and other models and carries out a similar procedure without any problems.

How to correctly and quickly remove keys from a laptop keyboard

With prolonged and even more careless use of the laptop, problems with the keys are often formed. They can get stuck, poorly pressed, and some keys can even break. To solve this problem, you need to figure out whether it is possible to remove the keys from the laptop and how to do it. Looking ahead, we will say that this procedure is simple and it is not at all necessary to run to the service center, everything can be done at home.

How to remove and reinsert a laptop key

After removing and inserting back the laptop keys, the procedure can be considered complete. In general, putting the keys in place is a completely simple task and is carried out strictly in the opposite direction.

Standard keys We put in place and gently press down the upper edge, wait with a click, and then press down the lower edge and wait with a click.

We work differently with the space bar. Primary metal amplifiers We fix in the grooves of the keyboard base. Next, put the key and click on the upper edge, and then on the lower one and wait by clicking.

How to remove keys from an HP laptop keyboard

In some situations, it is not enough to know how to remove keys from an HP laptop keyboard, as it becomes necessary to remove it completely. In some situations, cleaning and replacing the keys may not lead to the desired result. As a result, it is necessary to remove the keyboard. By the way, with a completely detached keyboard it is much easier to disconnect all the keys.

To remove the keyboard, use a thin screwdriver to push back the latches. It is best to start this procedure from the upper left corner. Removing the latch, slightly lifting the keyboard and starting to move horizontally. The main thing is not to rush so as not to damage the keyboard. The last thing to do is to disconnect the ribbon cable. It should be said that the train is an unusually fragile element, so we proceed with caution.

READ  Stripe Appeared On Laptop Monitor

In general, every user can figure out how to remove a key from an HP laptop. over, such a procedure is quite easy to carry out at home. All that is required is to act carefully, and not to rush and be extremely careful. So, it is guaranteed that it will be possible to remove and return the keys to their place.

Mountings

We figured out how to remove the keys from the keyboard, but how to remove the mounts themselves? We continue to consider the option in which the mounts are located at the top of the key.

You have to do the following:

  • We take the same knife and insert it between the two component parts of the fastening element. Place the blade slightly lower or higher “mustache”.
  • Bend the inner part of the component inward and slightly downward in order to “mustache” came out of the groove and turned out to be lower than the part of the mount that is external.
  • The mounts are detached, which means they can be pulled out.

If everything is clear with how to remove the keys from the laptop keyboard, then how to return them to their place?

Putting the keys back in place

We hope that during the disassembly of the device, no fastening elements were damaged, since we will need them in the same state:

  • We take the key and put it on its Seat. Align the path and push the component a little until it clicks.
  • If the buttons do not respond or refuses to snap into place, then chances are that you have assembled the fastening parts incorrectly. Recheck your work.

How to remove a button from a laptop keyboard?

Have you noticed that clouds of dust literally accumulated under the keyboard buttons, does not mean crumbs and other debris? Are you going to clean up all this mess? Sounds pretty simple, if you, of course, disassembled it before. Didn’t you understand? Then you can run into some difficulties here if you do not have an idea of ​​the process. How to remove a button from a laptop keyboard? Let’s find the answer to this question together.

What to do?

First, you need to prepare a small set of tools: a stationery knife, a nail file or something similar.

Before getting down to business, let’s talk about some of the key structure features. The buttons have mounts on which they are fixed, and the mount itself consists of two parts. These parts are connected by small “mustache”, that come out of the back of the mount and are inserted into the groove. This connection allows the buttons to move freely, otherwise pressing would be problematic.

The best solution would be to first remove the vertical mounts, but before that you need to determine the location of the side of the button on which these mounts are located. For this:

  • Just bend the key slightly on one side and try to look under it.
  • If we don’t really look at it, we just start bending the key on each of its sides until it loosens and does NOT unfasten.

Often the grooves are located at the top of the button, so we will consider this particular option:

  • Take a utility knife and insert it under the button (on the right side).
  • Further, making rotational movements clockwise.
  • These actions should help you unfasten the key, you just have to pull the component a little to the side, and it seems to be removed.

Returning the mounts to the keyboard

If you followed this method, as described above, then the assembly takes place in reverse order. It may, of course, happen that the parts of the mountings are messed up with each other, then it is best to assemble “constructor” in hand, and only after that (not without the help of a good old clerical knife) mount ready “swing” in metal mounts that are located on the keyboard surface.

If both parts completely enter each other in a closed state, then you are on the right track.

Home keyboard repair

To carry out restoration work, you will need the following tools:

  • Insulin Syringe Needle.
  • Soldering iron, preferably thin.
  • Simple pliers.
  • Small pressure.
  • Mounting knife.

You can also get by with a more modest set of accessories:

  • Brush brush hair.
  • Sewing needle.
  • Lighter.
  • Pliers or strong tweezers.
  • Technical superglue.

We start repairing:

  • Take the fastener with the broken metal leg and install it on the workplace.
  • We take a needle in one hand, and a thin soldering iron in the other.
  • The needles must be applied to the damaged area. It is desirable that it goes somewhere 2 millimeters on the part of the part that was not damaged.
  • We warm up the needle with a soldering iron and carefully melt it into the plastic surface.
  • Cutting pliers Get rid of excess plastic. Most importantly, don’t overdo it.

Alternative way

If you do not have the tools that are used in the previous method, then you can safely use the alternative repair instructions:

  • Take a needle and heat it with a lighter.
  • Next, you need to make a groove, into which the villi from the comb will be inserted freely (you can use something like that).
  • Threading the villi and fixing it with a small amount of superglue.
  • We wait from forty minutes to an hour and check the part for performance.

Alternative way

If you do not have the tools that are used in the previous method, then you can safely use the alternative repair instructions:

  • Take a needle and heat it with a lighter.
  • Next, you need to make a groove, into which the villi from the comb will be inserted freely (you can use something like that).
  • Threading the villi and fixing it with a small amount of superglue.
  • We wait from forty minutes to an hour and check the part for performance.

Mountings

We figured out how to remove the keys from the keyboard, but how to remove the mounts themselves? We continue to consider the option in which the mounts are located at the top of the key.

You have to do the following:

  • We take the same knife and insert it between the two component parts of the fastening element. Place the blade slightly lower or higher “mustache”.
  • Bend the inner part of the component inward and slightly downward in order to “mustache” came out of the groove and turned out to be lower than the part of the mount that is external.
  • The mounts are detached, which means they can be pulled out.

If everything is clear with how to remove the keys from the laptop keyboard, then how to return them to their place?

Returning the mounts to the keyboard

If you followed this method, as described above, then the assembly takes place in reverse order. It may, of course, happen that the parts of the mountings are messed up with each other, then it is best to assemble “constructor” in hand, and only after that (not without the help of a good old clerical knife) mount ready “swing” in metal mounts that are located on the keyboard surface.

If both parts completely enter each other in a closed state, then you are on the right track.

Home keyboard repair

To carry out restoration work, you will need the following tools:

  • Insulin Syringe Needle.
  • Soldering iron, preferably thin.
  • Simple pliers.
  • Small pressure.
  • Mounting knife.

You can also get by with a more modest set of accessories:

  • Brush brush hair.
  • Sewing needle.
  • Lighter.
  • Pliers or strong tweezers.
  • Technical superglue.

We start repairing:

  • Take the fastener with the broken metal leg and install it on the workplace.
  • We take a needle in one hand, and a thin soldering iron in the other.
  • The needles must be applied to the damaged area. It is desirable that it goes somewhere 2 millimeters on the part of the part that was not damaged.
  • We warm up the needle with a soldering iron and carefully melt it into the plastic surface.
  • Cutting pliers Get rid of excess plastic. Most importantly, don’t overdo it.

What to do?

First, you need to prepare a small set of tools: a stationery knife, a nail file or something similar.

Before getting down to business, let’s talk about some of the key structure features. The buttons have mounts on which they are fixed, and the mount itself consists of two parts. These parts are connected by small “mustache”, that come out of the back of the mount and are inserted into the groove. This connection allows the buttons to move freely, otherwise pressing would be problematic.

The best solution would be to first remove the vertical mounts, but before that you need to determine the location of the side of the button on which these mounts are located. For this:

  • Just bend the key slightly on one side and try to look under it.
  • If we don’t really look at it, we just start bending the key on each of its sides until it loosens and does NOT unfasten.

Often the grooves are located at the top of the button, so we will consider this particular option:

  • Take a utility knife and insert it under the button (on the right side).
  • Further, making rotational movements clockwise.
  • These actions should help you unfasten the key, you just have to pull the component a little to the side, and it seems to be removed.

Putting the keys back in place

We hope that during the disassembly of the device, no fastening elements were damaged, since we will need them in the same state:

  • We take the key and put it on its Seat. Align the path and push the component a little until it clicks.
  • If the buttons do not respond or refuses to snap into place, then chances are that you have assembled the fastening parts incorrectly. Recheck your work.

Something broke? Do not rush to give the device to the workshop, because you can try to fix the problem with your own efforts.