How to reinstall Windows on an HP laptop

How to reinstall Windows on a laptop?

Sooner or later, any computer user is faced with malfunctions of the operating system. This problem can occur both among laptop owners and people who work on a personal computer. Most failures occur due to clogged registry or viruses on the computer. If cleaning the registry using a special program did not help, then the only way to solve this problem is to reinstall the operating system. It is important to know how to reinstall Windows on a laptop.

Oddly enough, reinstalling the system on a laptop and a computer is a little different, and this is due, first of all, to the lack of necessary drivers on the installation disk. After completing the installation of Windows on your laptop, you will need to manually install the drivers. If you decide to install the Windows 7 operating system on your laptop, then be prepared for the fact that it consumes significantly more resources than Windows XP. Therefore, before reinstalling Windows on a laptop, read the system requirements and compare them with your hardware.

Let’s proceed directly to reinstallation. So, if you have a licensed disk with an operating system, then you can simply insert it into the drive and start reinstalling. But how do you reinstall Windows XP on a laptop if the installation disc is missing? Very simple. We download the required version of the OS from the Internet, it is an image that must be opened using a program for working with virtual images. Go to “My Computer”, select the virtual disk that appears and launch it. These operations can be performed only if your computer is working properly. If there is no way to download the image or the OS does not boot at all, then you will have to reinstall it through the BIOS.

How to reinstall Windows on a laptop via BIOS?

At the next start of the computer, insert the boot disk with the operating system into the drive. After that, we constantly press the Delete button in order to get into the bowels of our computer. As a result, you end up on a blue BIOS screen. Then, using the arrow control, we perform the following operations:

Press the Esc button, save and exit.

With the help of these manipulations, your Windows will now boot not from the hard disk, but from the usual CD or DVD media you installed. If you did everything correctly, then after the reboot the message Boot from CD / DVD will appear, after which you will need to press any key to further install the system. The hardest part about reinstalling an OS is waiting.

After you have pressed any of the buttons, after 5-7 minutes a window with a choice of language will appear. Press the button “Next” and “Install”. Then in 5-10 minutes a window with “License Terms” will appear, you put a tick and select the type of installation.

Now for the important point! If you want to completely reinstall the system, then select the appropriate item. In this case, the local drive C, on which the new system is installed, will be formatted.

When you select the “Update” item, all data on the local disk will remain, only the registry and various Windows system commands will be updated.

Further, the installation of the operating system will be carried out independently. During the reinstallation, your laptop will restart itself several times. Installation takes less than an hour on average and will be complete when the desktop appears. If you reinstalled the system via BIOS, then do not forget to change the media type for its subsequent boot. After that, you can proceed with the installation of drivers and necessary software if you did a complete reinstallation. Now you know how to reinstall Windows on a laptop, and you can update or completely reinstall the system yourself.

Reinstalling Windows on a laptop. step by step instructions

reinstall, windows, laptop

Hello everyone, readers, system administrators, as well as guests of my blog.

Since laptops today steadily hold a leading position in comparison with stationary computers, I decided to write a detailed article on how to reinstall Windows on a laptop, and of any company, from any medium. Go!

In fact, it doesn’t really matter if you have acer or lenovo. There is a difference in technical parameters. By and large, this will only play when you enter the BIOS, since depending on the models, the key combinations are different. For the software part, such parameters as the type of hard drive, the amount of RAM and the presence of USB ports, an optical drive and other components are more important.

All this affects only the speed of work, and not the ability to install the operating system. For example, the more powerful the processor (its bus), the less time it will take to unpack files, the more RAM, the faster the system response. Accordingly, the more capacious the hard drive, the more OS components you can install.

The most common list of OS installations on laptops, including models from HP. You will need the media itself. You can download the distribution from here.

Also need UltraISO software.

Since we will install Windows from a USB flash drive, it needs to be prepared. Launch UdtraISO and insert the USB flash drive. Click the file tab and there click the “open” position.

Now we select the image with the operating system.

Now we go to the bootstrapping tab and there we click on the parameter to record the hard disk image.

The first selected line should contain your flash drive. The recording method is set to USB-HDD, then click on the format button.

In the formatting window, select the NTFS file system and then start the process.

In the warning sign, click on OK.

At the end of the process, such a plate will appear.

Now, in the main interface of the program, click on the record.

We are waiting for the final burn. Everything, the carrier is ready.

To install Windows from a disk, we need a bolt. We insert it into the drive and open the program. Next, click on the button to open the image.

Now we open the image itself with the operating system.

All infa from the virtual disk should be displayed in the main software window.

This method will work for any laptop, including Samsung and asus. Next, press the entry.

In the plate that appears, press YES.

The next step is the recording process. Gotta wait for the end.

And so, whether you will install Windows from a USB flash drive or from a disk, you will have to go into the BIOS and configure the boot from the media. And so, initially we restart the PC and as soon as it turns on, press DEL or F2. A screen like this will appear.

You can control the movement of the system with these keys.

Go to the download settings tab, and then to the priority line.

Next, select a USB flash drive, disk or hard drive.

And we expose the media higher, eat the hard drive.

Then press F10 and reboot from the USB flash drive, go blanks with Windows.

Consider the installation process using the example of the seventh Windows.

Loss of data on the system disk is indispensable, so save it in advance.

The first thing you see will be this picture.

You need to press any button on the keyboard and the download will start.

Then we choose the language. According to the standard in the Russian version, the language will be Russian. But if you prefer a foreign language, then choose according to your taste.

Then a screen with one button “Install” will appear. This is what we must press.

Next, there will be a choice between editions of the operating system. if you have a sufficiently powerful laptop, for example, one of the latest models from Asus or HP, then choose the 64th operating system. If the PC is weak, then 32 bits.

A plate will appear with the choice of the type of installation, We do not need an update, because we are installing the OS from scratch. Therefore, we choose a complete installation.

Next, a window will appear with the parameters of hard drives.

Click on the settings and completely erase or delete all sections. And then we just create new hards from free space.

In general, 40-50 gigabytes on the main partition will be enough for a seven when the entire hard drive is divided. Under the eight 60-70. Under the top ten, I recommend allocating a hundred GB.

We format the section and click next. A list of operations will appear and the PC will reboot as it progresses. All this will last from 15 to 50 minutes. You will have time to drink tea and relax. The next thing that appears on the screen will be the following picture.

Here you need to name your account, and below indicate what your personal computer will be called. In principle, you can leave everything as it is. The system automatically generates these parameters.

Now you will need to enter your registration key. If you don’t, just skip the step. Then you can download the activator, or completely use the unactivated version, although you will have a warning sign in your left corner.

I will repeat for dummies, there is nothing to worry about.

In the security settings, select the first parameter. At least you don’t have to set everything up manually. This is suitable for those who really understand this. If you don’t have the skills, just click on the first position and the system will set everything up by itself.

Set your time zone in the time parameters. If you do not know what it is, type in your city in Wikipedia and it will display the time zone by which the clock is set in your region.

In the network parameters, set the first position again. Setting up something here, without knowledge, is dangerous. Therefore, trust the automatically set parameters.

And after that you will see a ready-made desktop of your brand new operating system. All is ready!

I would like to give a couple of tips and useful information in the conclusion. I have compiled some useful videos for you:

Posted by admin in Notebook 29.07.2018 0 159 Views

Tips on how to reinstall Windows on your HP laptop yourself

HP notebook PCs usually come with Windows 8 preinstalled, which many users prefer to change to the more familiar Windows 7 and seek help from service centers. We want to help you a little and tell you how to reinstall Windows on your HP laptop yourself.

To reinstall the operating system, you usually start by going to the BIOS. But in the case of an HP laptop, we will not have to deal with the traditional BIOS, but with the UEFI BIOS. a new, more modern interface between the system and the hardware.

Among the many new features of the Extensible Firmware Interface, this is how the abbreviation Unified Extensible Firmware Interface is translated, we want to note only one. the ability to work with disk space of 9,000,000,000 TB. This is achieved through the use of GPT. a partition table that replaced the usual MBR. For comparison: MBR provides access to disk space of no more than 2 TB.

One of the pitfalls of Windows 8 is the Secure Boot mode, which does not allow booting operating systems other than it.

Our goal is to provide the ability to boot the seventh Windows on an HP laptop.

  • As soon as the laptop starts to boot, press the Esc key and go to the boot menu.
  • Using the F10 key, go to the BIOS Setup section.
  • Select the Boot Options item from the System Configuration tab.
  • Disable Windows Secure Boot Mode:
READ  How To Install Bluetooth Laptop

Secure Boot = Disabled.
We include support for compatibility with other operating systems:

Legacy support = Enabled.
To save the settings, press the F10 key and confirm the impossibility of loading the current operating system in the dialog box

the system unable to boot the OS # 8230.
We re-confirm the change in the boot method by entering the proposed numbers using the main keyboard after a warning

  • When restarting the laptop, press the Esc key and go to the boot menu.
  • Go to the Boot Device Options section using the F9 key and select the boot device (USB flash drive, laser disk drive).

Now our HP laptop is ready to install a new Windows.

After you have reinstalled the licensed Windows 7, you will only have to deal with the drivers. But what if you do not have the ability to quickly activate the operating system? The boot partition created by GPT will be locked, as soon as the activation period of Windows 7 expires, the system will go into a non-working state and you will have to reinstall it again. You can solve this problem by converting a GPT disk to MBR.

Converting a GPT disk to MBR is performed using the DiskPart utility from the Windows 7 distribution kit and entails a complete deletion of data on the disk. This option is suitable for users who decide to reinstall the operating system immediately after purchasing an HP laptop. Everyone else should make sure to make a backup copy of the disk before performing the conversion.

  • We boot from the Windows 7 installation disk and reach the stage of selecting the OS installation partition.
  • In the command line mode, run the DiskPart utility using the lt ShiftgtF10 key combination:

diskpart ltEntergt
We get a list of hard drives installed on the computer and find the required one:

list disk ltEntergt
To select a disk, use the select disk N. command, where N is the serial number of the disk. Disks are numbered starting at zero. Our laptop only has one hard drive, so the drive selection command looks like this:

select dick 0 ltEntergt
We delete data:

convert mbr ltEntergt
We finish working with the command line:

Converting a GPT disk to MBR without data loss is performed using the Paragon Manager utility. which can be found on multiboot disks (Live CD). We will be using a Lex Live CD (compiled from Lexa).

  • Booting from the Live CD.
  • Launch Paragon Manager and select our hard drive, which the paragon recognized as Basic GPT.
  • Launch the conversion process by selecting the Convert to basic MBR disk option (the Hard disk command from the top menu).

We hope you have successfully reinstalled the operating system on your laptop. Now let’s boot up and go to Device Manager. Devices with missing drivers are marked with a yellow question mark.

The manufacturer HP has posted on its website drivers only for the eighth Windows, but some of them are also suitable for the seven. The drivers for the audio card, WI-FI, Bluetooth, Card Reader, TouchPad and fingerprint devices are downloaded from the HP website at the link http://www8.HP.com/ru/ru/drivers.html.

We recommend looking for the rest of the drivers on drp.su and driver.ru.

We hope our tips help you reinstall your favorite operating system on your HP laptop.

How to put a boot from a USB flash drive in the BIOS

Windows 7 won’t install on an asus laptop

Many thanks! Otherwise, I could not figure out how to boot from a USB flash drive. Everything is clearly and step by step described in the article. Thanks again!

Thank you very much)) advice helped a lot)) helped out.

Hello. HP pavilion protect Smart laptop installed win 7 native stood 10 USB ports stopped working. Tell me what to do?

Good day! Perhaps some drivers are missing you need to look in the device manager, if everything is determined.

Hello! Such a problem! Help me decide ?! HP laptop, there was Windows 7! We put 8-ku and started: Klava does not rob, then # 171BOOTMGR is missing # 187. What to do now? Klava does not bother and this is on the screen?

Good day! You need to boot from the installation disk / flash drive with Windows, select partition System Restore # 187, then specify the system (in your case Windows 8) that you want to restore. Next, select Command line and enter the commands # 171bootrec.exe / FixMbr (Enter) and # 171bootrec.exe / FixBoot (Enter) in the console. We reboot. When Windows boots up, look for laptop drivers and install.

Good night As I understand it everyone has the same thing happened to HP laptops. I bought on January 13th. Thanks to the author for # 171stack # 187.

I bought a PC yesterday and decided to install 7 and this trouble appeared, but I just wanted to install the second OS.

You are welcome! In principle, that on a computer, that on a laptop is almost the same, only at the beginning there is a discrepancy.

Good day. Tell me, I installed 7 And I can’t get the driver USB ports don’t work and the Internet doesn’t connect How can I install?

If you have a device for reading optical discs, you can write to the disc either the drivers themselves, or DriverPack Solution (he himself will install all the drivers).

Why, after installing the virtual box, the blue screen of errors gets out, I tried it through no. Mode, the download of the files went and hung, even rebooted nothing happened: the screen climbs. In normal mode, demolish Win 7 on XP, the file Nvidia.sys did not work

Didn’t understand the last sentence. Write in more detail what you wanted to do and what you did. What does Nvidia.sys have to do with it?

After To save the settings, press the F10 key and confirm in the dialog box the impossibility of loading the current operating system

the system unable to boot the OS I cannot execute Confirm the change in the boot method again by entering the suggested numbers using the main keyboard after the warning

Secure Boot mode is pending # 187. There is no way to enter numbers. Is there a trick to do this? respectfully.

Greetings! You should try to activate the numeric keypad by pressing fn and f11. However, instead of f11, perhaps another button will work on your laptop model, so you will have to experiment.

I bought a beech with the Vista virus, I downloaded it, but for some reason, network games do not start, what is the problem?

If, as you write, the purchased PC with a virus, then the problem is the presence of malicious software. Therefore, first of all, it is imperative to perform the analysis and subsequent treatment with an antivirus utility.

Thank you so much for the article. It helped a lot.

During installation, a gray screen appears after the name of the HP logo, what is it?

Perhaps you are using an unofficial OS version for installation. Also, the reason may be in the computer itself, which does not meet the requirements of the installed operating system. All system requirements for Windows modifications are listed on the Microsoft resource. Please check the parameters match.

Of course, Microsoft recommends the minimum settings, but from experience it can be argued that the computer configuration should be more powerful than they indicate in their recommendations.

If the PC was overclocked, then you will need to remove it.

Some OS may not support USB 3.0, it is recommended to install by inserting a USB flash drive into a USB 2.0 port.

Sometimes the problem with freezing when installing Windows is solved by simply disconnecting all unnecessary wires from the PC. When installing the system, it is advisable to leave only the most necessary peripherals, for example, a mouse and a keyboard, and disconnect everything else. This also applies to additional user-connected RAM strips (it is better to leave only one if added). If there are 2 graphics adapters in the PC (1. built into the motherboard, 2. additional), it is recommended to connect the monitor to the 1st video card.

Tips on how to reinstall Windows on your HP laptop yourself

HP notebook PCs usually come with Windows 8 preinstalled, which many users prefer to change to the more familiar Windows 7 and seek help from service centers. We want to help you a little and tell you how to reinstall Windows on your HP laptop yourself.

To reinstall the operating system, you usually start by going to the BIOS. But in the case of an HP laptop, we will not have to deal with the traditional BIOS, but with the UEFI BIOS. a new, more modern interface between the system and the hardware.

Among the many new features of the Extensible Firmware Interface, this is how the abbreviation Unified Extensible Firmware Interface is translated, we want to note only one. the ability to work with disk space of 9,000,000,000 TB. This is achieved through the use of GPT. a partition table that replaced the usual MBR. For comparison: MBR provides access to disk space of no more than 2 TB.

One of the pitfalls of Windows 8 is the Secure Boot mode, which does not allow booting operating systems other than it.

Our goal is to provide the ability to boot the seventh Windows on an HP laptop.

  • As soon as the laptop starts to boot, press the Esc key and go to the boot menu.
  • Using the F10 key, go to the BIOS Setup section.
  • Select the Boot Options item from the System Configuration tab.
  • Disable Windows Secure Boot Mode:

Secure Boot = Disabled.
We include support for compatibility with other operating systems:

Legacy support = Enabled.
To save the settings, press the F10 key and confirm the impossibility of loading the current operating system in the dialog box

the system unable to boot the OS # 8230.
We re-confirm the change in the boot method by entering the proposed numbers using the main keyboard after a warning

  • When restarting the laptop, press the Esc key and go to the boot menu.
  • Go to the Boot Device Options section using the F9 key and select the boot device (USB flash drive, laser disk drive).

Now our HP laptop is ready to install a new Windows.

After you have reinstalled the licensed Windows 7, you will only have to deal with the drivers. But what if you do not have the ability to quickly activate the operating system? The boot partition created by GPT will be locked, as soon as the activation period of Windows 7 expires, the system will go into a non-working state and you will have to reinstall it again. You can solve this problem by converting a GPT disk to MBR.

Converting a GPT disk to MBR is performed using the DiskPart utility from the Windows 7 distribution kit and entails a complete deletion of data on the disk. This option is suitable for users who decide to reinstall the operating system immediately after purchasing an HP laptop. Everyone else should make sure to make a backup copy of the disk before performing the conversion.

  • We boot from the Windows 7 installation disk and reach the stage of selecting the OS installation partition.
  • In the command line mode, run the DiskPart utility using the lt ShiftgtF10 key combination:

diskpart ltEntergt
We get a list of hard drives installed on the computer and find the required one:

list disk ltEntergt
To select a disk, use the select disk N. command, where N is the serial number of the disk. Disks are numbered starting at zero. Our laptop only has one hard drive, so the drive selection command looks like this:

READ  How to take a screenshot on a Huawei laptop

select dick 0 ltEntergt
We delete data:

convert mbr ltEntergt
We finish working with the command line:

Converting a GPT disk to MBR without data loss is performed using the Paragon Manager utility. which can be found on multiboot disks (Live CD). We will be using a Lex Live CD (compiled from Lexa).

  • Booting from the Live CD.
  • Launch Paragon Manager and select our hard drive, which the paragon recognized as Basic GPT.
  • Launch the conversion process by selecting the Convert to basic MBR disk option (the Hard disk command from the top menu).

We hope you have successfully reinstalled the operating system on your laptop. Now let’s boot up and go to Device Manager. Devices with missing drivers are marked with a yellow question mark.

The manufacturer HP has posted on its website drivers only for the eighth Windows, but some of them are also suitable for the seven. The drivers for the audio card, WI-FI, Bluetooth, Card Reader, TouchPad and fingerprint devices are downloaded from the HP website at the link http://www8.HP.com/ru/ru/drivers.html.

We recommend looking for the rest of the drivers on drp.su and driver.ru.

We hope our tips help you reinstall your favorite operating system on your HP laptop.

How to put a boot from a USB flash drive in the BIOS

Windows 7 won’t install on an asus laptop

Many thanks! Otherwise, I could not figure out how to boot from a USB flash drive. Everything is clearly and step by step described in the article. Thanks again!

Thank you very much)) advice helped a lot)) helped out.

Hello. HP pavilion protect Smart laptop installed win 7 native stood 10 USB ports stopped working. Tell me what to do?

Good day! Perhaps some drivers are missing you need to look in the device manager, if everything is determined.

Hello! Such a problem! Help me decide ?! HP laptop, there was Windows 7! We put 8-ku and started: Klava does not rob, then # 171BOOTMGR is missing # 187. What to do now? Klava does not bother and this is on the screen?

Good day! You need to boot from the installation disk / flash drive with Windows, select partition System Restore # 187, then specify the system (in your case Windows 8) that you want to restore. Next, select Command line and enter the commands # 171bootrec.exe / FixMbr (Enter) and # 171bootrec.exe / FixBoot (Enter) in the console. We reboot. When Windows boots up, look for laptop drivers and install.

Good night As I understand it everyone has the same thing happened to HP laptops. I bought on January 13th. Thanks to the author for # 171stack # 187.

I bought a PC yesterday and decided to install 7 and this trouble appeared, but I just wanted to install the second OS.

You are welcome! In principle, that on a computer, that on a laptop is almost the same, only at the beginning there is a discrepancy.

Good day. Tell me, I installed 7 And I can’t get the driver USB ports don’t work and the Internet doesn’t connect How can I install?

If you have a device for reading optical discs, you can write to the disc either the drivers themselves, or DriverPack Solution (he himself will install all the drivers).

Why, after installing the virtual box, the blue screen of errors gets out, I tried it through no. Mode, the download of the files went and hung, even rebooted nothing happened: the screen climbs. In normal mode, demolish Win 7 on XP, the file Nvidia.sys did not work

Didn’t understand the last sentence. Write in more detail what you wanted to do and what you did. What does Nvidia.sys have to do with it?

After To save the settings, press the F10 key and confirm in the dialog box the impossibility of loading the current operating system

the system unable to boot the OS I cannot execute Confirm the change in the boot method again by entering the suggested numbers using the main keyboard after the warning

Secure Boot mode is pending # 187. There is no way to enter numbers. Is there a trick to do this? respectfully.

Greetings! You should try to activate the numeric keypad by pressing fn and f11. However, instead of f11, perhaps another button will work on your laptop model, so you will have to experiment.

I bought a beech with the Vista virus, I downloaded it, but for some reason, network games do not start, what is the problem?

If, as you write, the purchased PC with a virus, then the problem is the presence of malicious software. Therefore, first of all, it is imperative to perform the analysis and subsequent treatment with an antivirus utility.

Thank you so much for the article. It helped a lot.

During installation, a gray screen appears after the name of the HP logo, what is it?

Perhaps you are using an unofficial OS version for installation. Also, the reason may be in the computer itself, which does not meet the requirements of the installed operating system. All system requirements for Windows modifications are listed on the Microsoft resource. Please check the parameters match.

Of course, Microsoft recommends the minimum settings, but from experience it can be argued that the computer configuration should be more powerful than they indicate in their recommendations.

If the PC was overclocked, then you will need to remove it.

Some OS may not support USB 3.0, it is recommended to install by inserting a USB flash drive into a USB 2.0 port.

Sometimes the problem with freezing when installing Windows is solved by simply disconnecting all unnecessary wires from the PC. When installing the system, it is advisable to leave only the most necessary peripherals, for example, a mouse and a keyboard, and disconnect everything else. This also applies to additional user-connected RAM strips (it is better to leave only one if added). If there are 2 graphics adapters in the PC (1. built into the motherboard, 2. additional), it is recommended to connect the monitor to the 1st video card.

HP Pavilion g6-2364sr: Install “Windows 7” instead of “Windows 8”. Follow Unsubscribe browsing

People help pliz. I installed the seven and the drivers do not fit
good afternoon, I advise you to use the driver pack, and another question is what does the driver mean, usually they may simply not be enough when you install Windows like here. I would like to know all the same what does not fit)

Found the instruction on the Internet “Installation on a laptop HP Pavilion g6-2364sr Windows 7”:

In BIOS by “F10”.

A simple installation in the “UEFI Boot Order” to boot from the “CD / DVD ROM Drive” will do nothing (subsection [I] “Legacy
Boot Order ”[/ I] is not active). The download comes only from the OS boot Manager. Let’s take a close look at the new one in the BIOS.
the “Secure Boot” menu item, which is enabled in this case. The BIOS of the HP Pavilion g6-2364sr includes
the ability to disable this insidious service. Disable Secure Boot “Disabled”

Next, select the item (it will become active) Clear All Secure Boot Keys and clear all the keys that were
saved earlier.

Then turn on Legacy Support

In Legacy Support, we set the boot as we need it and boot from external media.

So, having booted from the distribution disk “Windows 7 SP1 64-bit” we have:

Then I used heavy artillery. the diskpart utility:

Run the installation disk with “Windows 7” When the screen with the “Install” appears
below you select the item “Recovery”.
Do not choose to fix problems automatically as need a second option.
A window will open with all sorts of tools, among them you select the command line.

In the black command line window that appears, type diskpart and press ENTER.
Attention! After that, the line before the blinking cursor will start with DISKPART

select disk # and press ENTER.
# Is the number of the disk you want to reformat.
The number can be viewed using the list disk command.
(the same command will show which disk is protected by GPT next to it there will be a sign)
For example, I wrote select disk 2
A line appeared
Disc 2 selected

clean and press ENTER. (ATTENTION! If the disk contains the necessary data, then it will not be possible to get it later!)
A line appeared
DiskPart: Disk Cleanup Successful.

create partition primary and press ENTER.
A line appeared
DiskPart: The specified partition was created successfully.

  • Everything, you can exit from diskpart and the command line: exit, ENTER, exit, ENTER.
    Now you can reinstall the system.

Posted by admin in Notebook 29.07.2018 0 158 Views

Reinstalling Windows on a laptop. step by step instructions

Hello everyone, readers, system administrators, as well as guests of my blog.

Since laptops today steadily hold a leading position in comparison with stationary computers, I decided to write a detailed article on how to reinstall Windows on a laptop, and of any company, from any medium. Go!

In fact, it doesn’t really matter if you have acer or lenovo. There is a difference in technical parameters. By and large, this will only play when you enter the BIOS, since depending on the models, the key combinations are different. For the software part, such parameters as the type of hard drive, the amount of RAM and the presence of USB ports, an optical drive and other components are more important.

All this affects only the speed of work, and not the ability to install the operating system. For example, the more powerful the processor (its bus), the less time it will take to unpack files, the more RAM, the faster the system response. Accordingly, the more capacious the hard drive, the more OS components you can install.

The most common list of OS installations on laptops, including models from HP. You will need the media itself. You can download the distribution from here.

Also need UltraISO software.

Since we will install Windows from a USB flash drive, it needs to be prepared. Launch UdtraISO and insert the USB flash drive. Click the file tab and there click the “open” position.

Now we select the image with the operating system.

Now we go to the bootstrapping tab and there we click on the parameter to record the hard disk image.

The first selected line should contain your flash drive. The recording method is set to USB-HDD, then click on the format button.

In the formatting window, select the NTFS file system and then start the process.

In the warning sign, click on OK.

At the end of the process, such a plate will appear.

Now, in the main interface of the program, click on the record.

We are waiting for the final burn. Everything, the carrier is ready.

To install Windows from a disk, we need a bolt. We insert it into the drive and open the program. Next, click on the button to open the image.

Now we open the image itself with the operating system.

All infa from the virtual disk should be displayed in the main software window.

This method will work for any laptop, including Samsung and asus. Next, press the entry.

In the plate that appears, press YES.

The next step is the recording process. Gotta wait for the end.

And so, whether you will install Windows from a USB flash drive or from a disk, you will have to go into the BIOS and configure the boot from the media. And so, initially we restart the PC and as soon as it turns on, press DEL or F2. A screen like this will appear.

READ  How to lock the keyboard on an asus laptop

You can control the movement of the system with these keys.

Go to the download settings tab, and then to the priority line.

Next, select a USB flash drive, disk or hard drive.

And we expose the media higher, eat the hard drive.

Then press F10 and reboot from the USB flash drive, go blanks with Windows.

Consider the installation process using the example of the seventh Windows.

Loss of data on the system disk is indispensable, so save it in advance.

The first thing you see will be this picture.

You need to press any button on the keyboard and the download will start.

Then we choose the language. According to the standard in the Russian version, the language will be Russian. But if you prefer a foreign language, then choose according to your taste.

Then a screen with one button “Install” will appear. This is what we must press.

Next, there will be a choice between editions of the operating system. if you have a sufficiently powerful laptop, for example, one of the latest models from Asus or HP, then choose the 64th operating system. If the PC is weak, then 32 bits.

A plate will appear with the choice of the type of installation, We do not need an update, because we are installing the OS from scratch. Therefore, we choose a complete installation.

Next, a window will appear with the parameters of hard drives.

Click on the settings and completely erase or delete all sections. And then we just create new hards from free space.

In general, 40-50 gigabytes on the main partition will be enough for a seven when the entire hard drive is divided. Under the eight 60-70. Under the top ten, I recommend allocating a hundred GB.

We format the section and click next. A list of operations will appear and the PC will reboot as it progresses. All this will last from 15 to 50 minutes. You will have time to drink tea and relax. The next thing that appears on the screen will be the following picture.

Here you need to name your account, and below indicate what your personal computer will be called. In principle, you can leave everything as it is. The system automatically generates these parameters.

Now you will need to enter your registration key. If you don’t, just skip the step. Then you can download the activator, or completely use the unactivated version, although you will have a warning sign in your left corner.

I will repeat for dummies, there is nothing to worry about.

In the security settings, select the first parameter. At least you don’t have to set everything up manually. This is suitable for those who really understand this. If you don’t have the skills, just click on the first position and the system will set everything up by itself.

Set your time zone in the time parameters. If you do not know what it is, type in your city in Wikipedia and it will display the time zone by which the clock is set in your region.

In the network parameters, set the first position again. Setting up something here, without knowledge, is dangerous. Therefore, trust the automatically set parameters.

And after that you will see a ready-made desktop of your brand new operating system. All is ready!

Installing Windows 7 on a Hewlett Packard M6 laptop from a USB flash drive. installation of drivers. Part 1.

In this guide, we will learn how to install the Windows 7 operating system on a Hewlett Packard M6 laptop from a USB flash drive. And also install the drivers for the updated system.

Before starting the laptop, be sure to insert the USB flash drive into the USB connector closest to the power connector. That is, in the connector version 2.0. The rest of the connectors on the laptop version 3.0. they will not work for us. If you insert a USB flash drive into such a connector, the system will display an error message.

After that we turn on the laptop. During loading, press the “Esc” button. A small menu will appear on the screen.

Here we press the “F9” button and get into the “Boot Manager” menu. In this window, select the device from which we will install the operating system. In the image below, we see that a line is activated indicating the choice of a flash drive. If you want to install Windows from a disk, then you must select the line “Internal CD / DVD ROM Drive”.

From the list, select the version of the operating system that we want to install. For example Microsoft Windows 7 Ultimate SP1 x86.

In the next window, select any of the options for the bitness of the system x86 or x64.

Next, the configuration of the system parameters will begin.

In the next window, leave the default language, time and keyboard layout settings. Go to the next window by clicking on the “Next” button.

A window will appear listing the operating system versions. We select the version you need. If the laptop is powerful, then you can safely install Windows 7 Maximum x64. If the laptop has less than 2 GB of memory, then it is better to install x86 (that is, the 32-bit version).

Then we agree to the terms of the license agreement.

In the next window, select the full installation.

If there is no important information in the sections, then it is better to delete the sections. To do this, select the “Disk settings” button under the list of partitions.

In the next window, we confirm our action. We repeat the action for all sections.

Read the continuation in the next part of the article.

Choosing a boot device

  • When restarting the laptop, press the Esc key and go to the boot menu.
  • Go to the Boot Device Options section using the F9 key and select the boot device (USB flash drive, laser disk drive).

Now our HP laptop is ready to install a new Windows.

Conversion to MBR without data loss

Converting a GPT disk to MBR without data loss is performed using the Paragon Manager utility. which can be found on multiboot disks (Live CD). We will be using a Lex Live CD (build from Lexa 2011).

  • Booting from the Live CD.
  • Launch Paragon Manager and select our hard drive, which the paragon recognized as Basic GPT.
  • Launch the conversion process by selecting the Convert to basic MBR disk option (the Hard disk command from the top menu).

Tips on how to reinstall Windows on your HP laptop yourself

HP notebook PCs usually come with Windows 8 preinstalled, which many users prefer to change to the more familiar Windows 7 and seek help from service centers. We want to help you a little and tell you how to reinstall Windows on your HP laptop yourself.

Disable Secure Boot

One of the pitfalls of Windows 8 is the Secure Boot mode, which does not allow booting operating systems other than it.

Our goal is to provide the ability to boot the seventh Windows on an HP laptop.

  • As soon as the laptop starts to boot, press the Esc key and go to the boot menu.
  • Using the F10 key, go to the BIOS Setup section.
  • Select the Boot Options item from the System Configuration tab.
  • Disable Windows Secure Boot Mode:
    Secure Boot = Disabled.
  • We include support for compatibility with other operating systems:
    Legacy support = Enabled.
  • To save the settings, press the F10 key and confirm the impossibility of loading the current operating system in the dialog box
    ” the system unable to boot the OS”.
  • We re-confirm the change in the boot method by entering the proposed numbers using the main keyboard after a warning
    ” Secure Boot mode is pending”.

Conversion to MBR with data deletion

Converting a GPT disk to MBR is performed using the DiskPart utility from the Windows 7 distribution kit and entails a complete deletion of data on the disk. This option is suitable for users who decide to reinstall the operating system immediately after purchasing an HP laptop. Everyone else should make sure to make a backup copy of the disk before performing the conversion.

  • We boot from the Windows 7 installation disk and reach the stage of selecting the OS installation partition.
  • In the command line mode, run the DiskPart utility using the ShiftF10 key combination:
    diskpart
  • We get a list of hard drives installed on the computer and find the required one:
    list disk
  • To select a disk, use the select disk N. command, where N is the serial number of the disk. Disks are numbered starting at zero. Our laptop only has one hard drive, so the drive selection command looks like this:
    select dick 0
  • We delete data:
    clean
  • Convert the disk:
    convert mbr
  • We finish working with the command line:
    exit
  • We continue installing Windows.

If GPT doesn’t work

After you have reinstalled the licensed Windows 7, you will only have to deal with the drivers. But what if you do not have the ability to quickly activate the operating system? The boot partition created by GPT will be locked, as soon as the activation period of Windows 7 expires, the system will go into a non-working state and you will have to reinstall it again. You can solve this problem by converting a GPT disk to MBR.

Theory is indispensable: BIOS and UEFI, MBR and GPT

To reinstall the operating system, you usually start by going to the BIOS. But in the case of an HP laptop, we will not have to deal with the traditional BIOS, but with the UEFI BIOS. a new, more modern interface between the system and the hardware.

Among the many new features of the “Extensible Firmware Interface”, this is how the abbreviation “Unified Extensible Firmware Interface” is translated, we want to note only one. the ability to work with disk space of 9,000,000,000 TB. This is achieved through the use of GPT. a partition table that replaced the usual MBR. For comparison: MBR provides access to disk space of no more than 2 TB.

What to do with drivers

We hope you have successfully reinstalled the operating system on your laptop. Now let’s boot up and go to Device Manager. Devices with missing drivers are marked with a yellow question mark.

The manufacturer HP has posted on its website drivers only for the eighth Windows, but some of them are also suitable for the seven. The drivers for the audio card, WI-FI, Bluetooth, Card Reader, TouchPad and fingerprint devices are downloaded from the HP website at the link http://www8.HP.com/ru/ru/drivers.html.

We recommend looking for the rest of the drivers on drp.su and driver.ru.

We hope our tips help you reinstall your favorite operating system on your HP laptop.