How to reinstall Windows on a laptop from a USB flash drive

Preparing a distribution kit for installing Windows on Lenovo

reinstall, windows, laptop, flash, drive

It is assumed that you have an original Windows operating system disc. In this case, it is enough to insert the disc into the drive, restart the laptop and follow the further instructions of the bootloader.

But if you have to install the operating system from a flash drive, or if the original disk is lost, you will have to make a boot image yourself. There is nothing complicated about it. Pre-download / save the required version of Windows on a working computer and proceed.

To create a bootable USB drive, do the following:

  • download the UltraISO program from the official website. If desired, use another program with similar functionality. the procedure will remain the same. UltraISO is the most popular and convenient option;
  • after waiting for the package to download, launch the installation file and follow the bootloader’s recommendations;
  • click on the shortcut of the installed program with the right mouse button and run the software on behalf of the administrator by selecting the appropriate item, or you can run the ISO image itself directly;

in the opened menu of the program, press the button “File”, then. “Open”;

find the previously saved image of the operating system, select and open the “Bootstrapping” section. There we select the item “Burn hard disk image”;

the program will open a pop-up window. Make sure the removable drive is correctly identified. If an error is found, we make the appropriate changes.

press the button “Write”. In the “Hint” window that opens, the program will offer us to delete everything from the USB flash drive. We do it. We are waiting for the completion of the creation of the bootable USB flash drive.

4 steps of installing Windows on Lenovo

The buyer of a Lenovo laptop can have one of three operating systems at their disposal: Free Dos, Linux or Windows with limited functionality.

Usually, this situation does not satisfy the user, and he installs a full-fledged and familiar version of Windows. You can cope with the task on your own, eliminating the need to attract third-party computer specialists and avoiding unnecessary costs.

You will learn how to do this by studying the information below. The instruction is relevant for modern versions of Windows. Reinstallation differs from installation “from scratch” in that in the first case, at the appropriate stage of work, it is strongly recommended to format the hard disk partitions in order to avoid confusion and performance degradation in the future.

Installing Windows

BIOS configured, boot device prepared. We proceed directly to the installation of Windows. To do this, insert a disk or a USB flash drive into the laptop and reboot the device. The laptop will “figure out” on its own how it needs to boot. As a rule, no additional user action is required. Some models “ask” to press any key to boot from a removable drive. we do it.

We are waiting for Windows to unpack the files, after which we select “Full installation”.

Further events can develop in 2 scenarios:

  • if the hard disk is initially partitioned and the file system is formatted in NTFS, proceed with further installation;
  • if the system is CDA, we first delete the hard disk partitions. To do this, press the “Disk Setup” button and delete the partitions one by one.

Here we can divide the free space into several partitions. To do this, press the “Create” button, indicate the desired size (for the system, it is better from 30. 60 GB) and confirm our actions. Repeat until we allocate all available hard disk space.

Highlight the section dedicated to installing the operating system, and click on the installation. There will be no further features requiring detailed individual consideration. You need to follow the instructions of the installer.

BIOS setup on Lenovo

After completing the preparation of the laptop for sale, it is configured to boot from the hard drive. The main problem with installing the OS on Lenovo is the enabled protection in the BIOS. Your task comes down to configuring the BIOS to disable autoloading from the hard drive and booting from a CD or flash drive.

Pre-turn off the laptop, if it is turned on, and do the following:

press the power button; wait 1-2 seconds (until the start screen appears on the display. the inscription LENOVO on a black background), then press the key on the keyboard several times to enter the BIOS menu. In modern models of Lenovo laptops, the same keys are responsible for entering the BIOS: the F2 button opens the service menu directly, the F12 button opens the boot device selection section.

The Delete button or a combination of Fn and keys from the “F” group can also work. it is specified for a specific model and is usually determined experimentally;

examining the navigation (information is given at the bottom of the display). The task is as follows: open the Security (Secure) section, from there go to the Secure Boot category and press the Enter key;

configure Secure Boot to Disabled mode, i.e. disable protection;

press the Esc keyboard key to return to the main BIOS menu. From there we move to the Boot (Startup) section;

in the Boot section, the task boils down to configuring the laptop to boot from a CDROM or flash drive. To do this, move the appropriate option to the top of the list. Typically, the keyboard keys /. are used to change positions, but depending on the specific version, there may be differences. Check this point in the navigation information (found at the bottom of the BIOS setup menu);

press Esc, find the UEFI / Legacy Boot item and set it to Legacy Only mode (in some cases, this action has to be performed before performing the manipulations from the previous point, check it individually). Press the F10 button and confirm the desire to save the changes made by pressing Enter.

Typical Windows Installation Problems

The most common among users are two typical mistakes, the admission of which in the process of preparing for the installation of Windows can make it impossible to successfully conduct an upcoming event.

First, the wrong choice of format at the stage of formatting a flash drive.

Second, using the wrong boot image. Windows installation discs fall into two categories:

  • bootable. intended for “clean” installation of the operating system;
  • not bootable. they are mainly used to solve various problems and work only from under the Windows interface.

Thus, self-installation of Windows on Lenovo is not overly complicated: you just need to consistently follow the corresponding recommendations. Follow the instructions of the studied manual, be careful at every stage, and everything will definitely work out.

How to reinstall Windows on Asus laptop? Step-by-step instruction

Good day, blog visitors.

Any computer, regardless of the “stuffing” and the software used, sooner or later needs a clean installation of the operating system. This is due to various reasons. a new version has appeared, the old one is out of order, there is a desire to remove errors and others. Of course, reinstalling Windows on a laptop on Asus or any other manufacturer will help in all these issues. But today I’m just going to talk about the process associated specifically with the equipment from this computer giant.

BIOS setup

Now we need to set the boot via BIOS and some other elements. To do this, we perform a number of actions:

First you need to get to the above place. We reboot the device and immediately at startup press “Del”, “F2” or another key indicated on the monitor. it all depends on the model. For example, on k53s, the first option is suitable.

Then we go to the “BOOT” tab and select Hard Drive BBS Priorities. We need to put the USB stick first.

After we find “Launch CSM” and indicate “Enabled”.

Open “Security” and remove “Boot Control”.

At the end, press “F10” and confirm the action. This will save everything that we set, and then reboot the system.

Training ( )

If the installed operating system still allows you to work, there are three critical steps you must first take:

Prepare the necessary drivers (for a video card, network). It is with them that it will be possible in the future to find the rest of the elements.

Check your computer for viruses with Comodo Internet Security or AVG AntiVirus Free

Copy documents from system drive.

If your device no longer allows you to complete the above points, try to find another one with which you can still do this.

READ  How To Flip A Laptop To Factory Settings

Important drivers for the Eee PC model or any others are on the official website.

But copying documents from the system disk in case of laptop inoperability will not be so easy. If the device allows you to do this, we move it to a safe place. If not, open the laptop, take out the hard drive and try to connect it to other equipment. Pulling out the data you need.

Create bootable portable memory

It should be said right away that you can reinstall the OS in different ways. Previously, it was popular from disk, since there was simply no USB memory. In the early days, many motherboards did not support such devices. But over time, it became possible to carry out the necessary procedure from a flash drive. And today this option often becomes the only one, since many models simply may not have a suitable drive.

We’ll look at a no-disk option using only compact portable storage:

We find the image of the required OS. Usually Windows 7 is downloaded from different torrent trackers.

Install the UltraISO application. Since the program is paid, in order to use it, we press the “Trial period”. this will be enough for our purposes.

Go to the “File” menu and then “Open”.

Add the previously downloaded system image.

We go to “Bootstrapping”, and then “Burn the image”. A new window will open where we select “USB-HDD”, and then “Format”. We confirm the action.

At the end we are interested in “Record”.

Installation

Well, now let’s move on to directly hosting Windows 8 or any other OS version on the device:

When the system restarts, the display will show a message telling you to press any button to continue. Do it.

A plate will appear where you need to specify your preferred language. As a result, we select “Install”.

The “License Agreement” appears. We confirm reading.

Then we need a “Full Installation”.

Now we decide whether the process will take place with or without the removal of sections. Personally, I recommend allocating about 50 GB to the system disk. If you already have one, just click on the desired drive and then “Format”. We confirm our actions.

Using the fallback area

Also on some models, such as x54h, it is possible to use the recovery area. This is some space on the hard disk, which makes it possible to restore the system without a removable disk.

Important! If, after purchasing a laptop, the operating system has already changed, most likely it will be impossible to do this.

So, in order to use the tools from the backup department, we do a number of actions:

We restart the system and immediately hold down “F9”.

A menu will appear where we need to specify “Windows Setup” and confirm the action.

A corresponding message will appear at the end.

Turn on the device and specify the settings, as usually happens when you first start.

Well, as mentioned above, such a solution will help to cope with many problems. Sometimes even it comes up when the FN button does not work. But again, not on all models.

Hope this article helps you. Subscribe and tell your friends about the blog.

BIOS setup

To restore or reinstall Windows 7 on a laptop, you need to change some settings in the BIOS. To get started, restart your computer, on the initial boot screen, click “del” (works for most models, but sometimes F8 works). The mouse does not work in this system, so all actions should be performed using the arrows on the keyboard. When going to BIOS, do the following:

  • In the Boot section, find the Boot Device Priority section. This setting will indicate where to start the system.
  • In the menu, make sure that USB DEVICE is the first in the list in order if you are using a USB flash drive or your CD-Rom if the disk.
  • Press F10, confirm you want to save the changes.

Preliminary preparation of software for OS installation

To make a bootable media out of a dvd or a flash drive, it is not enough just to copy files or an image to it. To do this, prepare the required version of Windows itself, use the utilities to make an installation cd or a USB flash drive. For the whole process, you will need:

  • The Windows 7 program itself.
  • DVD or USB stick at least 4 GB.
  • ImgBurn Utility or Windows 7 USB-DVD Download Tool.

Preparing to install Windows 7

Before reinstalling Windows, you need to do a little preparation.

First, you need to copy all the valuable information from the C drive. Of course you know better, but still I will tell you where to look. There are not so many places where your useful information can be located on the “C:” drive, usually it is the desktop and “My Documents”. It is also worth looking into the root of the “C:” drive; sometimes people, in a hurry or simply out of ignorance, save files there. Copy all the files you need to another drive (for example, “D:”), DVD or USB flash drive (preferably not on the one with which you plan to install Windows).

For the future, keep in mind that it is best to store information not on the same partition of the disk on which the system is installed, and, of course, create backups.

If you have just purchased a computer or are sure that there is no valuable information in it, then naturally you can not bother

Another thing to consider before installing Windows is the drivers for the network card. If after installation it turns out that your Windows distribution did not have drivers for your network card, or for some reason they did not install correctly, then you will find yourself without drivers and without the Internet. Therefore, download the latest drivers in advance, at least for the network card.

How to reinstall Windows 7 on a laptop with built-in tools

A situation arises when there is a need to reinstall Windows 7, but there is neither a licensed dvd nor a flash drive at hand, to which you can copy the system files. On all laptops, be it Acer, ASUS (Asus) or Lenovo, you can run OS recovery or installation using a disk image. It can be created in advance or found on the Internet, but it must be stored on the computer, and the laptop itself must be turned on.

Reinstalling Windows 7 on a laptop requires special programs that are capable of recognizing images, these include:

To do this, mount the image into this program, run the file with the.exe extension. If Windows is simply archived, then you should not unpack it. Open the repository using the winrar or winzip programs, find the same executable file with the ending.exe again. After clicking on it, the standard process of reinstalling the operating system will begin.

Second option

Let’s consider how to set the boot from a USB flash drive in BIOS using the example of the second option. The previous screenshots showed a computer, then we will consider a laptop. In our case, it has a different BIOS installed. You can set up a boot from a USB flash drive here much faster.

Go to the Boot tab and look at the boot order. The flash drive is located in 5th place.

Move it to the 1st position with the F5 (down) / F6 (up) keys.

That’s all, setting up the laptop turned out to be much faster.

Save changes by pressing F10. When the computer restarts, you can proceed with the installation.

Configuring the computer BIOS to boot from a USB flash drive

To install Windows, it is not enough just to connect the installation flash drive to the computer, you also need to make sure that the computer starts to boot from it when it is turned on. This is done in the BIOS. There is a BIOS in almost any computer or laptop, it stores all sorts of important settings, one of these settings is the boot order of devices. This setting is of interest to us at the moment.

In order to get into the BIOS, you need to press a certain key on the keyboard immediately when you turn on the computer. Usually, when booting, it is written on the screen what exactly you need to press to get into the BIOS menu. Most often it is the Delete, Esc, or F2 key. You will find out what you have entered by seeing the BIOS menu in front of you.

READ  How to Turn On Lenovo Laptop First Time

If the attempt is unsuccessful, then restart your computer and try again. Below are tables with possible options for entering BIOS.

Table with key combinations for entering BIOS from various BIOS manufacturers.

After you have entered the BIOS, you need to find the option responsible for the boot order of devices. As a rule, these settings need to be searched for in the menu, the name of which contains the word BOOT, of course there are other options, but as they say. “He who is looking will always find”.

To make it easier to find, I will give a few examples of how it looks live:

The choice of the device to be loaded first usually occurs using the arrow keys on the keyboard, but there are other ways to navigate the BIOS menu, so if you can’t figure it out, you can see the help, which is usually in the BIOS in plain sight.

Choose as the first bootable USB device. HDD (it may be called differently, you need to search and try) and exit the BIOS with all changes saved. To do this, use the Save and Exit Setup item. The computer will restart and we, thus, got to the next stage, for which, in fact, everything was started.

First option

If your BIOS looks different. scroll down to the second option.

Go to the Advanced BIOS Features tab.

In the window that opens, click Boot Sequence.

Go ahead, in the next window select Hard Disk Drives.

Well, we got to our Kingston DataTravel flash drive. Now it is in second place, but it needs to be rearranged to the first one instead of the Hitachi hard drive. You will probably have other names. Therefore, ignore the manufacturers mentioned in this article. We are talking about them only as an example.

Change the boot order with the plus / minus (/.) keys. Other function keys are painted at the bottom of the screen.

After completing these simple steps, Kingston DataTravel was not the first place.

Now, if we press the Esc key to return to the previous step, we will see that USB Kingston DataT is displayed among the devices.

But again, here, too, you need to move the USB stick to the first place using the same “plus” and “minus”.

Now you know how to make a USB flash drive a bootable disk. Save the changes by pressing the F10 key. Next, a reboot will occur and the installation will begin.

There is another, faster way to change the boot order. In some cases, it allows you not to enter the BIOS. Let’s consider it in more detail. If you restart the computer, and during its boot, instead of the Delete key, press F11 (it may be different for you), a window will open for selecting the boot order of devices.

Select the flash drive using the up / down keys and press Enter. To exit the menu, without any settings, press Esc.

This method is much faster than the previous one, and you do not need to enter and change something in the BIOS settings. But it happens that the BIOS does not see the bootable USB flash drive connected to the computer, instead of it the hard drive is displayed.

In this case, you will have to configure the BIOS as described earlier.

How to reinstall Windows 7 on a computer and laptop

No matter which BIOS you set up, the Windows setup is the same everywhere.

First, the OS will prepare the necessary files, wait until the download is complete.

In the next window, specify the hard drive on which you will install Windows 7 and click “Disk Setup”.

In the following image, you can see that something is already installed on the drive we have selected. This is the current version of the OS that needs to be reinstalled.

Before proceeding, make sure that no important data is left on this partition of the hard drive. then you need to format it. Click “Format” when erasing data is complete. click “Next”.

After installing the updates, the computer will restart. disconnect the USB drive, otherwise the installation may start in a circle.

Then the PC will turn on again and the installation will continue without a USB flash drive.

After a while, the PC will restart again, and will prompt you to specify the time zone, date, time, administrator name (you can enter any), password for the computer. license key, and choose or opt out of automatic renewal. After entering the data, click “Next”.

At the final stage, the desktop will be prepared, then rebooted, after which the computer is ready to work.

If Windows was installed from a USB flash drive, then after installing the operating system, enter the BIOS again and, in the order of device boot, return the hard drive to the first place.

Did you like the article? Tell us about where-money.com on social networks.

How to create a bootable Windows 7 USB stick

Norms)) in vain I didn’t look before you had to catch up (I caught up with myself and now with a new Windows) the current I killed my head for 2 days and the PC turned off! I will visit you more often!

Step number 3: Configuring the start of the computer

After the USB installation media with the Windows image is ready, you can safely start editing the computer boot process. Note that you can set up a launch from a flash drive in different ways:

  • using hot keys;
  • via BIOS.

In the first case, when booting the PC, it is enough to press a special button, and then select from the options offered to start from a USB drive. As a hint:

In the second case, in order to enter the BIOS, at the time the computer boots up, you will need to press F1 / Del / F2 / F3 / TabF2 / Esc on the keyboard. Keyboard shortcuts may differ depending on the PC manufacturer, as well as the options for actions after opening the program itself. True, the reason for the discrepancy will be different. a different interface in the BIOS versions (Award, AMI, Phoenix-Award, UEFI).

In UEFI, for example, the setting for booting a PC from a flash drive will be like this:

  • go to the Boot section;
  • open the Boot Option 1 tab and press Enter to call the PC boot menu;
  • using the arrows and select the USB drive we have prepared with the Windows image and press Enter:
  • press F10 to save the settings and exit the BIOS.

That’s all we need to reinstall Windows on our computer. After setting the launch from the installation flash media, the PC is completely ready for reinstalling Windows.

Option # 1: DAEMON Tools Ultra

How to work with DAEMON Tools Ultra? Simple enough. Open the program, go to the “Tools” menu and select the “Burn boot image” item in it:

After that, we insert a USB flash drive with a memory capacity of 8 Gb or more into the computer and alternately perform the following actions in the program:

  • select a USB drive;
  • we register the access path to the bootable Windows image;
  • set the MBR parameter for writing;
  • put a tick in front of the item “Format”;
  • select the file system. For those who do not know what is the difference between FAT32 and NTFS and which of them to give preference, let us explain. The first type of file system is suitable for computers with a standard BIOS. In UEFI, devices with NTFS are often unreadable. But FAT32 can be used in both BIOS versions;
  • if necessary, prescribe the volume label (rename the USB flash drive);
  • check the availability of free space on the USB-drive and press the “Start” button.

In principle, this is all that is needed, so after clicking on “Start” the Windows image will begin to be written to the USB flash drive in automatic mode:

All that remains is to wait for Windows to finish writing to the USB flash drive, and then click the “Finish” button:

Step # 2: create a bootable flash drive

It’s no secret that you can make an installation from an ordinary flash drive in a variety of ways. One way or another, all the original data on it will be deleted regardless of the method used. At the same time, the following methods are most often used to write a bootable Windows image to a USB drive:

  • configuration via the command line;
  • processing in the Rufus utility;
  • writing an iso image to a USB flash drive via DAEMON Tools;
  • recording in the UltraISO program;
  • preparation with Windows 7 USB / DVD Download Tool;
READ  How to connect a laptop to a Wi-Fi router

Each of these methods, of course, has its own advantages. However, the easiest way, perhaps, is to use utilities such as Rufus and DAEMON Tools to write a bootable USB flash drive. If you want to try other methods, read here.

How to reinstall Windows on a computer using a USB flash drive? Instructions for action

Computer failures are not uncommon. Either the antivirus will miss, and viruses will settle in the system, then the program will not install correctly and start sending spam in the form of error messages, then after the next Windows update it will retire. One way or another, reinstalling Windows is still one of the solutions. It seems to be simple: we swam, we know, we used the installation disk more than once. Only this tricky trick does not always work now. Netbooks do not have DVD drives. So the question comes to mind, but how to reinstall Windows from a USB flash drive on a PC? Really very simple.

Step # 1: prepare your computer

Let’s start with a trivial action. copying data from the local drive C. For some, it may be news that after reinstalling Windows, all information on the hard drive will be deleted. But you and I are well aware of this and therefore do not forget to take care of the backup of important documents and files from the working drive C in advance.

Option # 2: Rufus

It is equally convenient to create a USB drive with a Windows iso image using the Rufus 1.4.12 program. You can also download it absolutely free of charge from the official website of the developer. The instructions for it look like this:

  • open the program and at the same time connect the USB flash drive to the computer;
  • in the window that appears, write the path to it, select the desired file system and set other settings:
  • select the Windows image file and click “Start”:
  • wait until the end of the recording process and close the program.

Step # 4: reinstall the operating system

For those who have installed Windows on their own at least once, reinstalling it on a computer will not be difficult, because you will have to act in the same way:

  • boot from the flash drive, and then select the language for installing Windows;
  • in the window that appears, click “Install”;
  • we accept the terms of the license;
  • click “Full installation”:
  • formatting the hard drive:
  • enter additional data (name, password, activation key, date, time), and then set up the network.

In principle, nothing supernatural. All actions follow from the installation program itself. However, if something suddenly does not work out, you have forgotten a little where, what and how, read this article. It describes and illustrates all the subtleties of the installation process.

How to create a bootable Windows 10 USB stick with ultraiso

To prepare a bootable flash drive, you need to download the UltraIso program from the official website.

Next, the downloaded program is launched, following the manufacturer’s recommendations.

During installation, you must select the medium by specifying the USB device.

After the program is fully loaded, you can run the ISO image:

File-Open. Select a Windows 10 disk image.

In the “Boot” section, go to the “Burn hard disk image” section

After pressing the “Write” button, a window appears with a proposal to delete all data from the drive, you should click “Yes”.

Installing Windows 10 from a USB stick on a lenovo laptop

How to install Windows 10 from a USB stick on a Lenovo laptop: New Lenovo laptops are often sold with a preinstalled operating system.

However, the default OS does not always suit the owner and he wonders how to reinstall Windows on a lenovo laptop.

Downloading is possible both on a PC with a different operating system, and on a new one, where there was no system before.

Before reinstalling Windows on a Lenovo laptop using a USB flash drive, you must select a drive with at least 8 GB and format it.

During recording, all data is deleted, so you should save the data to another location.

Installing Windows on a Lenovo laptop

To install the OS, you need to do the following:

  • Insert the USB flash drive into the device and reboot it.
  • Windows will unpack the files for a while, after the process is complete, the program will suggest the operating system to be installed. You must specify the Windows for which you have a license. To activate the OS, you need to enter the product key, or do it later. If there is a code, the key is activated automatically after connecting to the Internet. Click “Next”.

You should read the terms of the License Agreement and press the “Accept” button.

The first point involves updating the system while maintaining the old operating system settings and files.

The second option is used to completely reinstall the system.

Choosing the most suitable hard disk partition for installing Windows.

If there are several of them, and there is an SSD, then it is better to choose an SSD drive, it is the most productive and works faster than HDD.

If you want to create several partitions within 1 hard disk, you need to delete all partitions, after which free space will appear.

After creating a new disk, you need to format it and press the “Next” button to start the installation process.

This procedure takes 10-15 minutes, after which the computer will automatically restart.

After rebooting the system, a window for setting parameters will be displayed on the screen. It is recommended to disable all these parameters. in order not to do this manually, you can click on the item “Use standard parameters”.

We indicate the region of the user and configure the settings for connecting to the Internet.

Download software

Installing the OS on Lenovo should start by disabling BIOS protection.

To do this, you need to reboot the device and press the F2 key to open the BIOS menu. If the menu does not open, you can try to press Delete or use the FN button together with a key from the F group.

To disable protection, open the Security item then Secure Boot by pressing the Enter key.

In Secure Boot, you must go to Disabled mode to disable protection.

You can return to the main menu by pressing Esc, then go to the Boot (Sturtap) section.

This section is responsible for configuring PC boot from a USB flash drive or CD.

  • To use a flash drive, select and place at the top of the list using the keys /-.
  • In the UEFI / Legacy Boot section, select Legacy Only.
  • Press F10 and save changes with Enter.

Resetting BIOS settings to their original state

To avoid starting a new system installation, when using this flash drive, you must restore the old BIOS settings. To do this, you need to restart the computer and enter the BIOS menu in the same way that was used earlier to disable protection.

If Windows was downloaded from the official site, all updates should be installed automatically. You can check for all updates using the free DriverPack Solution program.

Self-installation of the operating system is not as difficult as it seems. Even a novice user who does not know how to reinstall Windows on a lenovo laptop can cope with it by following the simple recommendations specified in the text.