How to Put Brackets on a Laptop

The first way

This is what the square brackets look like on the keyboard:

brackets, laptop

They are usually located next to the English letter P.

What needs to be done? Just press the parenthesis key. You should end up with something like:

IMPORTANT! This process is only possible when using the English-language layout, so enable it. This can be done by pressing the ShiftCtrl keys.

Or using the switch on the taskbar.

A fascinating blog of enthusiastic IT specialists. Second way

Turn on the numeric keypad of a PC or laptop using the Num Lock key (if it is suddenly disabled).

Hold Alt and, while holding the key, type 91 for the left bracket and / or 93 for the right one. Then remove the finger from Alt.

In case the right Alt didn’t work, try the same with the left one.

What we have at the output:

Blog of the young admin. How to put square brackets on a computer or laptop keyboard?

In fact, on a computer or laptop keyboard, you can find several types of brackets at once, including square ones, which are necessary when writing text. But you don’t have to use a keyboard. there are other ways. And yet we will start with the keyboard.

Third way

Here we need the Windows symbol table.

To run it, press WinR on your keyboard.

The Run window will open. Add the command charmap.Exe, click OK.

Symbol table will start.

Find the bracket, click on it, and then click on the buttons “Select” and “Copy”.

Insert into line.

If you need to use both parentheses, copy them one by one.

How else can you enter square brackets? Signs and special characters on the keyboard

Notebook keyboard operation usually does not require additional software installation. The only exception is the functioning of the “hot keys”, for the operation of which it is necessary to install special utilities downloaded from the manufacturer’s website. The rest of the buttons, including the one that allow you to put a dash or any other punctuation mark, work on the drivers preinstalled in the BIOS.

Depending on the selected layout, some punctuation buttons change their location. Fearlessly, you can put an exclamation mark, a dash, an opening and closing parenthesis. Even a simple dash turns into an underscore when you press the Shift key.

Most of the punctuation marks and Special characters should be set this way, pre-pressed the Shift key. If, for example, a colon is drawn over the number “6” case, then you can put it on the Russian layout, press Shift. If the layout is in English, then the character that is located on the button to the left will be printed. To help you understand the difference, here is a plate with all punctuation marks in Cyrillic (Russian) and Latin (English) layouts:

If you need to insert characters that are on the keyboard into the text, then use the special table, which contains the Alt key combinations with numeric codes.

With the help of such tables (they are different), you can insert almost any symbol, here are the notes to the paragraph, emoticon or hearts.

Where are the bracketed keys on the keyboard? How to put them?

They are located on the Russian keys X and b. Switching to English by simultaneously pressing the Shift and Ctrl keys. Now these keys will enter square brackets when pressed. This rule is true for both Windows and Mac OS keyboards.

Photo showing the location of the keys responsible for square brackets on the keyboard

Creating a new layout

If you don’t like how punctuation marks are arranged on the keyboard, and you constantly wonder where the comma and where the dash are in different layouts, before putting the desired character, then change the layout for yourself using the free Microsoft Keyboard Layout Creator. This will solve the problem of punctuation marks moving around the keyboard. You have probably come across the following situation: in the text in English, you need to put a comma in the meaning, and in the Latin layout, when you press the button, you put down a slash.

Microsoft Keyboard Layout Creator will help you eliminate this inconvenience by allowing you to customize your layout. The second users will have to explain how they put punctuation marks, but you will not suffer when typing.

  • Run the program. In order not to create a keyboard layout with all letters and punctuation marks from scratch, Expand the “File” menu and click “Load Existing Keyboard”.
  • For example, let’s edit the Latin keyboard layout. Highlight “USA” and click “OK”.
  • Give the project a name. Expand the Project menu and select “Properties”.
  • In the “Name” line, specify the name of the project. it will be used as the name of the folder with configuration files. In the Description field, enter a name for the layout. Make it unique as it will appear in the list of Windows layouts. If you just write “English”, you will not be able to understand where is the usual layout, and where is the individual.
  • Return to the main program window. Look in the line “Current working directory”, where the folder with the configuration files will be saved. You can change the location of the directory by clicking on the button with dots and pointing through the explorer to a different location on the disk.

To assign a new value to a key, left-click on it and put another character or its code in the window that appears. Then you need to put a tick next to the “Shift” item and edit the so-called upper values ​​of the buttons on the keyboard. For example, you can split the dash and underscore on different buttons, or split the number “1” and the exclamation mark into separate keys.

If you press the “All” button in the character input window, an additional menu will appear in which you can set the keys to a value for combinations with Alt or AltShift.

It is not recommended to touch the letters, so as not to get confused. Put a period, comma, colon in the English layout in the same place where they are on the keyboard in the Russian layout. Do not forget to match the Russian layout, so that there are no errors and overlapping characters.

If you need additional characters that are natively available on the keyboard, then these can also be easily added using the Microsoft Keyboard Layout Creator. For example, add a ruble sign to a button with a dash and an underscore.

  • Open the Unicode character table. Find the ruble sign. Copy the character itself or its Unicode number.
  • Return to the main program window. Click on the dash button, then click “All”.
  • Insert the ruble sign into the “ctrlaltkey” line. Save the new dash configuration, clicked “OK”.

When the layout is ready, you need to install it. First you should save the project: “File”. “Save Source File As”.

To add a layout, you need to create an Installation package with a setup.Exe file, which will run the installer. Expand the Project menu and click Build DLL and Setup Package. The installer will offer to create a log of the operation (click “Net”) and open the folder with the file for installation in the explorer (click “Yes”).

The layout is ready, it remains to install it. Run the setup.Exe file and wait for the installation to complete. Then go to the Language and Locale section of Control Panel. On the Keyboards and Languages ​​tab, Click Change Keyboard. Click “Add” and find the created layout in the list. Standard layouts can be deleted, they will NOT be needed anymore.

To avoid confusion about which signs it makes with which keys, you can make stickers with symbols. Over time, they will be erased or fly off, but by this moment you have already got used to the fact that the button with a dash can put the ruble sign, and the comma and period are always in the same place, and do not move around the keyboard.

Good afternoon, dear readers! In this article, I will show where on the keyboard apostrophe, dog, quotation marks, square brackets, dashes. And also how to put all these symbols.

How to open brackets on a laptop

Square brackets are a widespread pairing symbol in various sciences, it is used when recording transcriptions in materials for studying foreign languages, and is also used to stylishly write the part of a nickname that is responsible for a team. It is very simple to put them. Today we will tell you how to put square brackets on the keyboard, and without its help. If all you need is to quickly copy the square brackets, here they are: [].

READ  Connecting Two Monitors To A Laptop

Use symbol table

The Windows operating system has a table with all the required symbols. It is located in the Start menu. All Programs. Accessories. System Tools. But in order not to cheat on the menu, just use the search:

The symbol table will appear in place of the commonly used programs that are usually displayed in this menu. Click on it, and you will see all the necessary symbols, including square brackets:

By the way, there are such tables of symbols in the basic office programs Word, Excel. To do this, in the top menu, select the “Insert” tab and find in the menu that appears the icon with the signature “Symbol”, as shown in the figure:

That’s it, now you know how to put square brackets on the keyboard or without it on Windows and Mac. It’s time to put knowledge into practice!

When writing, not only letters are used, but also punctuation marks: period, colon, comma, exclamation mark, dash, etc. In addition to punctuation marks, the laptop keyboard has special characters. for example, hash, dollar sign, underscore line, which can be made from a dash. In this sense, the laptop keyboard completely mimics a regular computer keyboard, offering a similar set of punctuation marks.

Copy and paste.

Just copy the square brackets [] and then paste them where you want. You don’t have to look for them on your keyboard if you rarely need them. To copy the brackets, select them with the mouse, then press the key combination Ctrl C. To paste the copied brackets in the desired place, hover the cursor, left-click, and press Ctrl V.

How to put an apostrophe on the keyboard. where is the apostrophe on the keyboard

In order to put an apostrophe on the keyboard, there are several ways, but the simplest of them, this will turn on the English keyboard layout, then click on the button “E”.

How to type on the keyboard the dog symbol. g where is the dog on the keyboard

In order to type the dog symbol on the keyboard, you must switch the keyboard layout to English mode by pressing the keys “Alt Shift”, after that, hold down the “Shift” key and simultaneously press the number two on the keyboard, as a result of this combination, the dog @ symbol will appear.

How to put quotes on the keyboard. where are the quotes on the keyboard

There are two types of quotes: “paws” they are also called German and “Christmas trees” are French quotes. In order to put them, you must press the following combination on the keyboard.

Turn on the button “Num lock” on the keyboard to light up the indicator, where it is, I told here.

How to quote a Christmas tree

Hold down the Alt button on the keyboard and type 0171. you get the Christmas tree opening quotes “

Hold down the Alt button on the keyboard and type 0187. you get a Christmas tree closing quotation marks “

How to put quotes quotes

Press the Alt button on the keyboard and type 0132. you get the opening quotes of the paws “

Hold down the Alt button on the keyboard and type 0147. you get closing paws ”

How to put square brackets on the keyboard. where are the square brackets on the keyboard

In order to type square brackets on the keyboard, you need to translate the keyboard layout into English, then Press the buttons in turn “x” and “b” after which you get square brackets [].

If you squeeze out “Shift” you get these brackets.

How to put a dash on the keyboard. where is the dash on the keyboard

On the keyboard, you can type two types of dashes, short and long.

How to put an en dash

In order to make an en dash, you must press the button “dash” indicated in my screenshot.

How to put an em dash on the keyboard

In order to make an em dash on the keyboard, you must:

Enable button “Num lock” (the number 1 indicator on the keyboard should light up).

Hold down the “Alt” button and dial the code 0151 after which you get an em dash.

What is special

Unlike desktop PCs, the BIOS password on most laptops cannot be reset by unplugging the flash battery, where the BIOS microcode is stored with all settings. It is there. Passwords are recorded in a separate non-volatile eeprom memory, which is NOT erased when the power is turned off.

Forgotten password on some laptop models can be reset using Special passphrases. The methodology for selecting THESE phrases from Asus, Lenovo, HP and other laptop brands is not the same and is far from always effective. Often the problem is solved only by flashing the storage module on the programmer.

The hard disk password is stored in a secure area of ​​the magnetic media, as well as in the controller’s memory. When the user enters the password, both copies are matched. This dual method of storing the password ensures maximum data security on the disk, but if forgotten, it cannot be restored or reset. Information will be lost forever.

Who suits

For those who want to keep personal files away from others, such as family members or colleagues.

Windows password protection

Who suits

For those who store especially valuable data on a laptop.

What is good

Simplicity and safety.

How to put a password on a laptop: 2 easy ways

Information stored on laptop disks is at a greater risk of leakage than on home stationary PCs. After all, many owners carry a mobile computer with them and sometimes leave it without control. To prevent your data from falling into the wrong hands, it must be protected. The easiest way to do this is with a password.

Let’s talk about how to put a password on a laptop and what method of protection will be optimal for you.

How to install on Windows 8-10

For the first time, Windows 8 users were able to use not only a symbolic password, but also a picture password to log in to the system. The latter, if it is well thought out, and no less reliable than the text one, but it is much easier to remember.

Windows 10 introduces PIN and Windows Hello features in addition to password protection. A PIN is a short combination of numbers that a user can enter instead of a Microsoft account password. According to the developers, this was done to simplify the logon for those who use the computer in a safe environment, for example, only at home.

Windows Hello is a new feature. Its essence lies in the recognition by the system of the user’s fingerprint, face or iris. It is convenient, but does not work on all devices and is currently NOT fully debugged.

The section for managing all types of passwords in the “eight” and “ten” is located in the “Settings” application. In Windows 10, it opens via the Start menu (gear-shaped button).

In Windows 8 (8.1), for this you need to call the Charms charm, call it “Settings” and then. “Change computer settings”.

Further actions on both systems are very similar, so we will consider them only on the example of Windows 10.

While in the “Settings” application, open the “Login Settings” section, select the desired type of password and click “Add”.

  • To create a text password for your account, open the subsection “Password”. Enter the code phrase, confirmation and hint in the appropriate field.

Pin-code and picture password are available only for Microsoft account (under the local administrator, these functions are inactive).

  • To set the PIN (in Windows 10), enter a few numbers in the Provided fields, Confirm them and Click OK to save. Unlike Microsoft’s online account, the PIN will only work on this device.
  • To create a picture password, load any picture into the application. Please confirm your agreement to use this picture when creating your password. After that, draw on the image some simple shapes that are easy for you to remember, and repeat the drawing 3 times.

What is bad

Low reliability. Easy to crack. It is NOT suitable for protecting especially valuable information.

READ  How to connect an SSD to a laptop via USB

What is good

Possesses high resistance to breaking. Not only protects the entrance to the operating system, but also prevents changes to BIOS settings (including preventing the laptop from loading second media).


Any text editor, be it a text word or a wordpress editor, has a symbol table. The symbols are usually located on the top panel. Click on the symbol icon and a window will open.

Choose the necessary characters, in our case. square brackets, and insert them into the text.

You can also remember the numerical values ​​of the square brackets. At any time, when you need to enter square brackets, you press the alto button, then, Do not release it, press the plus sign and the numbers 91 on the right numeric panel. When you release the alto button, an open parenthesis will appear.

If instead of 91 you enter numbers. 93, then a closing parenthesis will appear. Thus, you can Learn and enter many characters you need. The character code table is on the Internet.


Another simple and reliable way is to copy square brackets into notepad and add them as needed in the text.

This is done as follows:

  • Open the search page in any browser;
  • Write in the search box. square brackets;
  • Copy the characters in the search results to your notepad.

Now, when you need to insert a square bracket into the text, just open notepad and copy the opening or closing bracket.

This short post aims to help users to better understand the capabilities of text editors. However, there are some other useful articles on my blog that I recommend you read.

And yet, Subscribe to blog updates to receive timely notifications of new articles. Then you will be aware of fundamental news, you will learn a lot of interesting earnings on the Internet. I wish you good luck in new meetings.

How to put a square bracket on a keyboard

The first way, the simplest and fastest, is to put a square bracket using the keyboard.

Instructions in two steps:

  • Switch your keyboard layout to English;
  • In the right corner, find the buttons responsible for writing Russian letters. X and b In the English layout, these buttons print brackets. If you press the Shift key, which is responsible for the upper characters, then the curly brace is printed. However, if you do not press Shift, then the lower characters will be printed. And this is exactly the square brackets. [].

As you can see, everything is quite simple. But what if your keyboard has such brackets? For example, you have a keyboard in other languages ​​and different from the one in which I just wrote. This is quite acceptable, we agree?

I cannot know the device of keyboards in all languages ​​of the planet, so I will tell you in the following ways of writing square brackets.

How to put a square bracket on a keyboard

How to put a square bracket on the keyboard, ways.

Situations often arise when you need to put this or that sign when writing a text, but how to do it is not clear. This is what happens with a character like square brackets. But not all users can figure out how to write them correctly.

However, this is not difficult at all, moreover, there are even several ways to write square brackets.

Setting wallpaper on your desktop: instructions

Rules for setting wallpaper on the desktop under the Windows operating system, how to change the wallpaper
Do you want to diversify your computer? Have you tried changing the usual Windows screensaver to other wallpapers you like? It is very easy to do this, but a beautiful illustration on your desktop will always cheer you up, especially if the image reflects the upcoming holiday, for example, New Year.

This method is relevant for all versions of Windows (XP, Vista, 7, 8.1, 10).

You can set the wallpaper on your desktop by following these steps:

  • Find a suitable picture. It should not only like you, but also fit the resolution of your own monitor;
  • Save the picture to your computer;
  • Find the splash screen, point the arrow at it, and then press the right mouse button;
  • After the list presented to you appears, you need to stop at a certain item “Set as desktop picture”. Also, this inscription can be in English “Set as wallpaper”;
  • After all the actions done, the wallpaper on the desktop should change. If suddenly the illustration is NOT installed, you should update the desktop or restart the PC.

Important! To update the desktop, you need to move the mouse cursor to an arbitrary, free space and call the right button, and then stop at the “Refresh” item, in English it is presented in this form “Refresh”.

In order to find out the resolution of your own PC, click on the link “Download wallpaper” and look at the numbers below, under the picture. Usually the permission is indicated there.

You can use another method. It is not very different from the previous one, but it is still worth telling about it. The presented method will allow you to save the image at the location of the computer and apply it in the future at your discretion.

To install an image on the desktop background, follow these steps:

  • Find the picture you like. Be sure to keep an eye on your monitor resolution. It must match the size of the picture;
  • Download the entire image by choosing the desired storage location;
  • Find the picture, point the mouse pointer at it and right-click;
  • After the presented list appears, you need to find and select the “Save image as.” item. Next, paste your folder into the window and save the wallpaper there, click on the “Save” item;
  • Find and go to the folder where the drawing is saved. Move the mouse pointer over the saved image and right-click;
  • Then, as usual, a menu will appear, in which it is very important to select the item “Set as wallpaper”, in English it sounds like “Set as wallpaper”;
  • After that, the illustration should appear on the desktop. If the image is NOT found, use the advice given above!

In this very elementary way, you can change the desktop screensaver and make your own computer more unique.!

Computer shutdown timer programs

There are a lot of different free programs for Windows that implement the computer shutdown timer functions. Many of these programs have an official website. And even where it is, antiviruses issue warnings for some timer programs. I tried to bring only tested and harmless programs (and give corresponding explanations to each), but I recommend that you also check the downloaded programs on


The PowerOff program is a kind of “combine” that has the functions of not only a timer. I do not know if you will use its other features, but shutting down the computer works fine. The program does not require installation, but is an archive with an executable program file.

After starting, in the main window in the “Standard timer” section, you can set the shutdown time:

  • Triggered at the specified time on the system clock
  • Countdown
  • Shutdown after a period of system inactivity

In addition to shutdown, you can set another action: for example, start the program, go to sleep or lock the computer.

And everything would be fine in this program, but when Closing it, it does not notify you in any way that you should not close it, and the timer stops working (that is, it needs to be minimized). Update: I was informed here that there is no problem. it is enough to check in the program settings to minimize the program to the system ponel when closing. The official site of the program could not be found, only on the sites. collections of various software. Apparently, there is a clean copy here (but check anyway).

Airytec Switch Off

The program. the timer for automatically turning off the computer Airytec Switch Off, I, perhaps, taking out in the first place: this is the only of the listed timer programs for which the working official website is clearly known, and VirusTotal and SmartScreen recognize the website and the program file itself as clean. Plus, this Windows shutdown timer is in Russian and is available for download as a portable application, that is, it will definitely not install anything additional on your computer.

After launch, Switch Off adds its icon to the Windows notification area (however, text notifications of the program are supported for Windows 10 and 8).

READ  How to Connect the Network Adapter on a Laptop

By a simple click on this icon, you can configure the “Task”, ie. Set a timer with the following parameters to automatically shutdown the computer:

  • Countdown to shutdown, shutdown “once” at a certain time, when the user is idle.
  • In addition to shutdown, you can set other actions. reboot, logout, break all network connections.
  • You can add a warning in the imminent shutdown of the computer (for the ability to save data or cancel the task).

By right-clicking the program icon, you can manually launch any of the actions or go to its settings (Options or Properties). This can be useful if the Switch Off interface was in English on the first launch.

Additionally, the program supports remote shutdown of the computer, but I did not test this function (installation is required, and I used the portable version of Switch Off).

How to set a computer shutdown timer using Windows

This method is suitable for setting the shutdown timer in all the latest OS versions. Windows 7, Windows 8.1 (8) and Windows 10 and is very easy to use.

To do this, the system provides a special shutdown program that turns off the computer after a specified time (and can also restart it).

In general, to use the program, you can press the WinR keys on the keyboard (Win is the key with the Windows logo), and then enter the shutdown.St N command in the Run window (where N is the time before the automatic shutdown in seconds) and click Ok “or Enter.

Immediately after executing the command, you will see a notification that your session will end after a certain time (full screen in Windows 10, in the notification area in Windows 8 and 7). When the time comes, all programs will be closed (with the option to save work, as if you manually shut down the computer), and the computer will be turned off. If you want to force exit from all programs (without the possibility of saving and dialogues), add the.f parameter to the command.

If you change your mind and want to cancel the timer, in the same way enter the shutdown.A command. this will reset it and shutdown will NOT happen.

Someone constantly entering a command to set the shutdown timer may not seem quite convenient, and then I can suggest two ways to improve it.

The first way is to create a timer shutdown shortcut. To do this, right-click anywhere on the desktop, select “New”. “Shortcut”. In the “Specify the location of the object” field, specify the path C: \ Windows \ System32 \ shutdown.Exe and add the parameters (in the example in the screenshot, the computer will shutdown after 3600 seconds or after a while).

On the next screen, give your desired shortcut name (whatever you like). If you want, after that you can name the ready-made shortcut with the right mouse button, select “Properties”. “Change icon” and select an icon in the form of a shutdown button or any other.

The second way is to create a.bat file, which, when launched, asks for how long to set the timer, after which it is set.

You can enter this code in notepad (or copy from here), then when saving in the “File type” field, specify “All files” and save the file with the.bat extension. Read more: How to create a bat file on Windows.

Shutdown at specified time via Windows Task Scheduler

The same thing that was described above can be implemented through the Windows Task Scheduler. To launch it, press the WinR keys and enter the taskschd.Msc command. then press Enter.

In Task Scheduler, select the “Create a simple task” item and specify any convenient name for it. At the next stage, you will need to set the start time of the task, for the purposes of the shutdown timer, this will probably be “Once”.

Next, you will need to specify the date and time of launch and, finally, select “Action”. “Run the program” and specify shutdown in the “Program or script” field, and.S in the “Arguments” field. After completing the creation of the task, at the appointed time the computer will be automatically turned off.

Below is a video instruction on how to set the Windows shutdown timer manually and a demonstration of Some free programs to automate this process, and after the video you will find a text description of THESE programs and some warnings.

Hopefully, if something about manually setting the automatic shutdown of Windows was not clear, the video could clarify.

Wise Auto Shutdown Timer

After one of the updates of the current review, in the comments drew my attention to the free computer shutdown timer Wise Auto Shutdown. I looked and must agree that the program is really good, at the same time in Russian and at the time of verification. completely clean of any suggestions for installing any additional software.

It is simple to enable the timer in the program:

  • We select an action that will be performed on a timer. shutdown, reboot, logout, sleep. There are two more actions, not entirely clear ones: Disconnect and Wait. When checking, it turned out that shutdown turns off the computer (what is the difference from shutdown. I did not understand: the whole procedure for logging out of the Windows session and shutting down is the same as in the first case), and waiting is hibernation.
  • We start the timer. By default, the checkbox “Show reminder 5 minutes before completion” is also checked. The reminder itself allows you to postpone the assigned action for 10 minutes or another time.

In my opinion, a very convenient and simple option for the shutdown timer, one of the main advantages of which is the absence of anything malicious in the opinion of VirusTotal (which is rare for this kind of programs) and a developer with, in general, a good reputation.

Computer shutdown timer

If you have a question about how to set a timer to turn off your computer, then I hasten to inform you that there are many ways for this: the main ones, as well as sophisticated use cases. Some are described in this manual (additionally, at the end of the article there is information about ” more correct “control of the time of work at the computer, if you are Pursuing just such a goal). You may also be interested: How to make a shutdown and restart shortcut.

Such a timer can be set using standard Windows 7, 8.1 and Windows 10 tools, and in my opinion, this option will suit most users. However, if you wish, you can use special programs to turn off your computer, some free options of which I will also demonstrate. Also below is a video on how to set the shutdown timer for Windows. Further information: How to set an alarm clock on a computer or laptop.

Sleep timer. Auto PowerOFF

The Auto PowerOFF timer program from Alexey Erofeev is also an excellent option for a shutdown timer for a laptop or Windows computer. I could not find the official website of the program, however, on all popular torrent trackers there is an author’s distribution of this program, and the downloaded file when checking is clean (but be careful anyway).

After starting the program, all you need to do is set the timer by time and date (you can also turn off weekly) or at any time interval, set a system action (to turn off the computer, this is “Shutdown”) and click the “ Start “.