Functions and useful properties
There is not much to say about the functions of the protective glass. From its name it is already clear why it was developed and what it was intended for. Whether it’s the features that can be talked about for hours. Their list, for example, includes resistance to scratches and other similar damage. Someone may doubt this parameter, but usually all doubts disappear after an indicative test. For this, you can use ordinary keys. Run the sharp edges over the glass and you will see that it really does not become covered with marks.
The second useful property of safety glass is shock absorption. We have already mentioned this briefly above. A large number of smartphones, when dropped down by the surface of the screen, are physically damaged up to the complete breaking of the display. With a protective glass, this problem will be solved, because instead of the screen it will break. By the way, the word “will break” here should also be understood a little differently from its usual meaning. Fragments from the telephone protective glass do not fly to the sides. Finally, we can note the fact that the glass is held very, very reliably. Especially if we compare it with a simplified element. film. Users who so often ask questions about how to properly glue glass on a phone may be delighted to learn that this operation does not require any special experience.
Considering the complete set
A very large number of requests are related precisely to how to glue the film (glass) on the iPhone 6. However, it should be understood that the process is generally the same for other devices. Why then dwell on specific models, if you can describe the operation universally? First of all, let’s see what is in the package with the protective glass? Different manufacturers offer different configurations, but usually there is glass itself, an alcohol wipe and a cloth made of special material. If there are no rags or napkins, then you can use improvised counterparts, this is not fundamental.
What is it
The appearance of the protective glass is similar to the exterior of the film. Indeed, the tasks of these two elements are similar to each other. However, protective glass is rightfully considered to be a more reliable component, since it has a higher density compared to a film. In addition, it is transparent and flexible, and this is also of some importance. Of course, it will cost more than a film. However, it is worth it, especially in cases where there is either a high probability of mechanical impact, or when the gadget is really expensive. For everyone, this bar is different, but most users prefer to buy glass if their devices cost more than 10-15 thousand rubles. When buying a protective glass, the user reduces the likelihood of damage to the main screen to almost zero, since the above-described component will take the entire blow. Before talking about how to glue tempered glass on a phone, I would like to draw your attention to the advantages of the element.
Glass on the phone: how to glue? Preparing the surface
If you have previously installed film or glass, these components will need to be removed. To do this, remove the cover, if there is one, then hook the element to the edge. In order to prevent the appearance of greasy stains on the glass, you should thoroughly wash your hands and dry them in advance. By the way, preparation of the workplace remains an important stage. You need a flat horizontal surface and powerful lighting. This could be, for example, a table. Lighting can help avoid undetected streaks and dusty areas. So what does it take to integrate glass on your phone? How to glue it? The operation will be correct only if you process the “bare” screen in advance.
iPhone 12 Pro Max : How to Install Glass Screen Protector
Are there any downsides
Yes, like other elements, protective glass has some disadvantages. Some users who are interested in how to glue screen protectors to their phone may think that this is the main drawback. it is indicative of the complexity of the integration process. Like, if it is wrong to stick it on for the first time, then you will not do anything later. In fact, this is not what we are talking about now. The main disadvantage of this component is the fact that the device on which you will glue it will become more voluminous and heavy. However, if this does not bother you, and you are not very sensitive to the weight and dimensions of the phone, but you want to protect it, then you can contact the cell phone stores. They will offer not only the best products, but for additional money they will be able to stick high-quality glass.
What is protective glass for?
It is difficult to disagree with the fact that long-term use of any smartphone does not imply the appearance of chips, cracks, scratches, scuffs. This fate is characteristic not only of the side faces, top and bottom ends and the back panel, but also of the front part. And there is perhaps the most important element. the smartphone screen. Protective glasses were invented precisely in order to protect the display of the device. You can also use a film, but it has a lower protection factor. In any case, it is important to know how to properly glue protective glasses on your phone.
How to glue the protective glass on the phone correctly? Step by step instructions
A smartphone is an expensive thing. Even when purchasing a budget-class device from 5 to 15 thousand rubles, we want it to serve for a long time and faithfully. The fidelity of a gadget, in turn, depends on two parameters: internal and external. And if we cannot influence the first (represented by the hardware part), then we are just able to overcome external factors. We can protect our smartphone, if not from drowning, then from mechanical stress, for sure. And the glass on the phone will help us with this. How to glue it? We will talk about this today.
How to apply glass to new models: iPhone 8, iPhone X and XR
With newer models, things are the same as with older ones. Modern coating kits may include a slightly different set of screen cleaning tools, but in general, the process is unchanged:
- Clean the display with an alcohol wipe or special cloth.
- Perform additional cleaning with adhesive tape from the kit.
- Remove the film and bring the coating close to the touchscreen.
- Align all the cutouts and lower the glass.
- Get rid of air bubbles, if any.
Removal of damaged or old glass must be done carefully
How effective is protective glass, what is it for?
It is an ordinary glass that has been tempered through chemical and physical treatments. During its production, the material is subjected to strong heating and etching in chemical compositions. In the process of such processing, the composition of the substance changes slightly, as does its structure. This consists in the replacement of weak ions of the crystal lattice with stronger ones. As a result, the glass becomes stronger, less prone to scratches.
Gorilla Glass withstands up-arm drops
Despite all the advantages, the protective coating has one drawback: the stronger it resists impacts and damage to the plane, the more prone to splitting into the butt.
Important! The touch screen of a phone, which can easily withstand a flat strike on the ground, can completely crumble when dropped on a corner or edge of the device. This fact is recorded by the masters working in service centers.
It turns out that the only 100% effect of such a coating is protection from scratches and abrasions, but you should not neglect it, because it can save the “life” of the display when dropped from a low height.
It is not difficult to glue the coating at home
What are the types of protective glasses for iPhone
In modern phones, the most expensive part is the screen. Its replacement cost can be close to half the price of a gadget. That is why it is important to be as careful with it as possible and to be safe by putting on protective glass, of which there are many types:
- 2D (transparent and not full size). It is suitable for phones with a flat display (in older models and some new budget versions). The glass is completely transparent and not visible to the eye, but if there were scratches on the screen, this may cause air bubbles to appear.
- Full-size Full Cover glass. It is usually used for smartphones with rounded edges. Glues to the entire surface or only to the frame.
- Three-dimensional. Such glass is curved in a physical sense. It follows the curvature of the screen and differs from other analogs with rounded edges.
Important! Each of the presented types has its own disadvantages and advantages. Most of the negative points are related to the price of glass and the fact that it is rather difficult to stick them on your own.
There is one more parameter according to which protective surfaces are usually subdivided into types. this is a coating. At the moment, there are about a dozen different variations, sometimes combined with each other:
- oleophobic (prevents fingerprints);
- having protection from peeping into the screen from the side;
- protection of vision;
Sticking protection to avoid accidental scratches
How to install protective glass on iPhone 5s
- Remove the case from the phone.
- Put it on a clean surface that is well lit.
- Wipe clean with a soft cloth or tissue, which often comes with a protective cover. In some cases, special adhesive tape is used to collect dust.
- Take the glass and remove the protective film.
- Bring the cover to the phone by aligning the cutouts for the speaker, camera and home button.
- Apply glass protection on the side of the earpiece and gradually lower it to the other side.
- Give a little time for the adhesive layer to disperse.
- Wipe the surface with a cloth, press the glass even harder.
- Check screen operation.
You need to glue the film or glass in a well-lit room.
How to stick protective glass on iPhone. detailed instructions
Since the days of the first touchscreen phones, one of the most popular methods of protecting a touchscreen has been the use of a screen protector or glass. The first gadgets without buttons were resistive and their plastic layer was quickly erased and covered with scratches. It was at this moment that the first films appeared, which were replaced by protective glasses. According to manufacturers, such coatings are able to protect the device not only from scratches and abrasions on the display, but also from impacts and falls on a hard surface. This article will tell you how to stick protective glass on the iPhone of new and old models and what types of protective coatings are on Apple smartphones.
How to apply glass protection on iPhone 6
Sometimes even professionals fail to glue the protection evenly and without air bubbles, aligning all the cutouts. To avoid mistakes, you need to follow the instructions that are suitable for iPhone 6:
- Wipe the display with an alcohol pad to remove fingerprints, dirt and dust from the surface.
- Do the same, but with a dry microfiber cloth.
- Apply a special blue tape to the phone to help remove particles invisible to the eye, and then remove it.
- Take the glass in your hands around the edges and peel off the film with an adhesive layer.
- Bring the cover as close as possible to the screen, align all the cutouts and carefully place it on the display.
- Press lightly in the middle with your finger to start the gluing process automatically.
- Remove air if present.
Important! Never press down on the edges of the protective surface if there is still air underneath. First of all, you need to squeeze it out of there, and only then finally press on the edges.
The kit will help to glue the protection many times faster
How to properly apply protective glass on iPhone
Before gluing the protective glass, you need to remove the case from your iPhone. If the screen has already been protected by an old and scratched surface, then it should be carefully removed. It is also important to wash your hands so that no dirt gets under the protection. Gluing should be done on a table with good lighting. This will allow you to see every speck of dust and get rid of it. Next, you are invited to view instructions for working with several popular iPhone models.
How to apply protection on iPhone 7
The process of gluing the protection on the iPhone 7 is no different from the previous paragraph with the sixth model. Provided that a person doubts his capabilities, it is better to entrust this to a professional. If not, then the process is as follows:
- Clean up the screen.
- Remove dust from it with a special tape.
- Place the cover on the screen gently and effortlessly.
- Allow the glue to disperse and wipe it down, pressing firmly around the edges.
How to stick protective glass
Make sure there is no dust
To be sure to play it safe and collect any dust particles from the surface of the screen, use a special sticker from the kit, a strip of scotch tape or electrical tape. Just stick and peel them all over the display area.
What kind of protective glasses are
The technology of protective accessories does not stand still and is developing along with smartphones. Now on the market there are glasses with a high-quality oleophobic coating, rounded edges, as well as frames that repeat the design of gadgets. Conventionally, all types of protection can be divided into three categories:
- 2D. ordinary glasses with straight ends, which do not reach the border of the screen by about 1 millimeter;
- 2.5D. such options have small smooth chamfers around the perimeter, which are combined with the curvature of the body;
- 3D. special glasses with curved edges for smartphones with a screen extending to the side edges.
Degrease the screen surface
This will remove dirt and streaks that can ruin the entire result. Proceed like this:
- Use the supplied wet wipe, or sprinkle the screen with display cleaner, antistatic agent, or alcohol.
- Wipe thoroughly to remove residual glue from the old film and other possible contamination.
- Use a microfiber cloth to wipe the screen dry.
Prepare the room
If dust gets under the glass, you have to live with bubbles on the gadget screen or try to remove them. To avoid this, do a wet cleaning in the room, or at least ventilate the room, with a clean cloth, preferably with detergent, wipe the table where you are going to glue the protection, wash your hands.
Another option: to carry out all the manipulations in the bathroom. In this case, the procedure is as follows:
- Turn on hot water for a few minutes, or better take a shower.
- The resulting steam will bind all the dust, it will settle to the floor, and the room will become almost sterile.
- Lay on a towel and sprinkle it with water from a spray bottle to be sure.
What are the pros and cons of protective glass
The protective glass is several times harder than the most durable film, and therefore saves the device not only from scratches. As the manufacturers say, it can even withstand a hammer blow. We do not recommend conducting such experiments. But we can say: if you fall, most likely, it is the glued glass that will break, and not the screen of the device.
At the same time, such protection does not affect the sensitivity of the sensor and the brightness of the image.
However, glass is more expensive than film. And you can pick it up only for relatively popular models of smartphones and tablets.
How to stick a protective glass on a smartphone
A detailed guide for those who want to make their device virtually invulnerable.
For which protective glasses is this gluing method suitable??
Currently, the market for accessories for the iPhone 6 has a colossal number of different options and sizes of protective glass. Our instructions consider bulletproof glass without a “Pre-installation platform”, which interferes with centering the glass relative to the smartphone body and the impossibility of using “Loops” for high-quality installation.
Why is it impossible to glue glass on an iPhone 6 with an adhesive platform using the proposed method? Everything is very simple. If you look at the pictures, it will immediately become clear. The platform will not allow you to center the glass; there are no through-cutouts for the Home button and the earpiece.
In the case of Benks, a similar design is usually used in the production of 3D glass. Instructions on how to glue 3D glass on iPhone 6, we published here.
How to stick glass on iPhone?
Today we will take a closer look at the process of applying a protective glass on an iPhone 6s or 6. This manual will discuss the main problems that you may encounter when applying 2.5D glasses. Read our tips carefully and feel free to start your own installation.
Compare the dimensions of the protective glass for iPhone 6 and iPhone 7
Quite often, manufacturers of protective glasses send prototypes to our editorial office for testing and checking the quality of the silicone adhesive layer. In this tutorial, we will stick the prototypes of the iPhone 7 protective glass on the iPhone 6.
iPhone 7 and iPhone 6 differ from each other in the size of the earpiece (in the iPhone 7 it is longer). If you look closely at the pictures, you will notice the main difference between the two smartphones. The only problem that can be encountered when gluing glass from one smartphone to another is the centering of the protective glass on the top of the device (relative to the earpiece).
To glue the glass on the iPhone 6 in the most accurate way, read the instructions below.
Attention! Protective glass from iPhone 6 cannot be applied to iPhone 7 without the formation of local air particles in the area of the earpiece.
Cleaning the iPhone 6 screen
We return to the process of gluing the protective glass. First of all, the display should be degreased with an alcohol wipe. To remove dust and dirt particles, carefully, in a circular motion, wipe the screen with microfiber. Make sure your iPhone 6 is at the ideal display frequency.
Attention! After cleaning the screen, immediately proceed to the next step of our instructions for gluing the protective glass. The display will quickly become covered with dust if the room in which you are installing the glass is dusty or has low humidity. We recommend doing this in the bathroom.
The main step. How to glue protective glass on iPhone 6?
Before removing the adhesive film, we recommend re-checking the alignment of the protective glass. If everything is in order, gently peel off the pre-installation base and lower the protective glass onto the screen.
Important! Apply the glass, do not press with your finger, to re-verify that there is no dirt under the glass and it is centered relative to the iPhone 6 case.
Press the center of the protective glass with your index finger. When most of the air has escaped from under it, peel off the tape, starting from the front of the smartphone.
Air under protective glass on iPhone. How to remove?
There are many ways to help you expel air from your phone’s protective glass. We’ll take a look at the most popular one. Our instructions are most suitable for localized (round) air bubble formation under protective glass. All you may need for this are short nails.
Determine the closest edge to where air is trapped. Gently pry up the edge of the protective glass using your fingernails. In the formed passage, expel the “Bubble” from under the protective glass of the iPhone 6.
Set of tools for installing protective glass
Let’s not get too far from our instructions. So, to install a protective glass on the iPhone 6S 6, we need:
Scotch tape and stickers will help us to glue the glass using the Petelek method. We advise you to use scotch tape, because Stickers are needed to remove dirt and dust particles from underneath the glued glass. The presence of microfiber in the instruments is required. Without it, it is impossible to remove fine dust and streaks from the use of alcohol or wet wipes.
How to deal with a peeling edge or air build-up around the edges of a protective glass on iPhone 6?
High-quality protective glass or bulletproof glass without defect of the glue layer, instantly adheres to the smartphone display without the formation of “non-sticky” along its edges. In case this should be done as follows:
Wait a few days. Perhaps the glue base is not in a deplorable state and over time the protective glass will stick to the entire display area of the iPhone 6. In such cases, we advise you to put the gadget on charge so that its body warms up a little. The temperature of the device will serve as a catalyst for the setting of the adhesive layer.
The protective glass on the iPhone 6 comes off at the edges? This happens, but not often. The smartphone display may be bent. It is quite easy to identify this problem. Apply protective glass from another manufacturer.
Features stickers on some phone models
The main feature of each individual product will be its size and the presence of holes for function keys. As an example, it will be relevant to study the features that protective glasses have on the iPhone, for example, such a product as Zool iPhone 5 0.1mm 9H.
Such glasses are inherent in such features as an exact match to the size of a smartphone, the presence of a special coating for comfortable control of the device and increased protective properties in conjunction with an ultra-thin design. However, as with other products, it is unlikely that you will be able to remove the protective glass and reinstall it a second time.
Remember that you are gluing the protective glass to the iphone for increased security, not aesthetics or functionality. Carefully match all edges and holes before placing the screen on the device.
Stick the glass
Try to glue the protective glass on your iPhone as accurately as possible. Remove the protective film and hold the glass directly over the device. All edges must match and the holes must match the button and speaker exactly. In order to stick the glass on the iPhone, you do not need to level it or press hard. a light press on the center of the screen will be enough. Check immediately that the sticker passes without bubbles and fluff remaining between the glass and the display.
Pros and cons of protective glass
The determination of the positive factors of choosing glass for the phone will be carried out in the form of comparison with the same film. In this case, the following positive aspects will stand out:
- Impact resistant. Even letting the gadget display down, with a high degree of probability, the touchscreen will remain intact, and only the protective glass on the smartphone will be damaged if it is glued correctly. Manufacturers claim that some models can even withstand hammer blows. However, such experiments are not recommended.
- Scratch resistant. Carrying a smartphone with keys, if the protection is provided by the film, means getting damaged, chipped and scratched. If you use high-quality protective glass on your gadget, such a problem is excluded with 99% probability. However, the same keys can scratch the device or damage other parts.
- Duration of protection. If you stick tempered glass at home and follow the recommendations, you can create effective protection for many years. Such screens do not peel off on their own, and also retain the transparency, color rendition and tactile sensitivity of the sensor.
- Ease of installation. An adhesive is applied to one side of the protective screen, which ensures a snug fit and turns the structure into a monolith. over, the sticker of the protective glass on the phone will not leave streaks, traces of glue or other negative factors that would reduce the visual display of information or the quality of transmitted colors. This is achieved due to the unique composition of the adhesive on the glass surface.
Even with reliable security, you need to keep an eye on your smartphone. How you handle and store your device will determine its durability and functionality. Remember that a phone screen protector is additional protection, not a panacea for any surprises and dangers.
Even this reliable method of securing smartphones has several drawbacks. Of course, the disadvantages will not be so significant in comparison with the advantages, but for some users they will be important:
- Cost. In comparison with the same film, the price for glass on the phone screen will be an order of magnitude higher. If you decide to entrust the sticker to professionals. be prepared for one more expense.
- Increase in size. Albeit slightly, but your smartphone will become more massive. Yes, the thickness of the protective glass does not even reach a millimeter, but even the thinnest phone will make it a little thicker.
- Precision and difficulty with fastening. For some users, gluing the protective glass correctly is a significant problem. Even one wrong move will ruin expensive protection without keeping your smartphone safe.
You can leave comments yourself at the end of the article, indicating not only examples from your own experience, but also asking questions to which you will receive an exhaustive answer. Remember that just a couple of lines or a repost in social. networks will help you solve problems not with impersonal information, but with the facts of real people who have already tried similar products.
Tips for choosing a safety glass
Having settled on this type of security, you should know that all glasses are tempered, but endowed with different properties. There are two types of screen protectors. glossy and matte.
In the first case, protection against scratches will be minimal, since the screen itself can easily get minor damage. This type of glass is glued to effectively resist drops and impacts, preventing damage to the touchscreen.
Frosted protective glass on iphone or other types of gadgets will have a higher degree of protection, up to anti-reflective coating. The negative side of such a purchase will be the high price, especially if you are purchasing a product of a well-known brand.
Prepare your tools
In order to stick a protective glass on Xiaomi or any other smartphone, you will need two types of napkins, a scraper (can be replaced with a plastic card), tape, scissors and a directly selected protective glass. All these details should be at hand, but not interfere with the sequence of actions.
First, carefully study all the points of the instructions, and only then get to work. The second attempt is not provided, but the first time you can evenly install the protection yourself, you can only carefully memorize the instructions.
iPhone 11 : How To Install Glass Screen Protector
Prepare the room
The preparation of the premises will include getting rid of dust, debris and even moisture. In this case, we are talking about wet cleaning in the room itself and thoroughly wiping the table. Also, remember to wash your hands and dry them with a towel. The smallest hair, speck of dust or a drop of greasy sweat can lead to a deterioration in the aesthetic qualities of the device.
How to glue a protective glass on a phone: detailed instructions
Before gluing the glass to the phone, you will need to perform a number of preparatory measures. Actions to consolidate protection are divided into five stages.
Remove missed specks of dust
They should be removed by gently lifting the edge of the glass with a scraper or plastic card. over, to stick it correctly without bubbles and lint means to make it completely invisible. If you did not manage to carry out such a procedure yourself the first time. by lifting the glass from the edge, remove the dust particles or a hair with scotch tape, pulling it sharply.
Do not use colored tape or paper versions of tape with glue. they can leave streaks and impair the display of information. The glued film or glass, with the exact observance of all actions, should not impair visibility. If you manage to stick the protective glass on Xiaomi, but bubbles have formed, remove them by squeezing them out with a microfiber cloth. Light pressure and movement of bubbles to the nearest edge of the display will quickly achieve the desired result.
How to stick the protective glass on your iPhone yourself
Many iPhone owners try to treat the device as carefully as possible. For this, various covers, bumpers and protective glasses are bought.
Here we will tell you how to easily and quickly glue the protective glass without “defects” in the process.
In this tutorial, we have used Mocoll glass. And it’s not just that
When you sadly look at an iPhone whose display is covered with a pitiless mesh, it’s too late to think about protection. The manufacturer of protective accessories Mocoll took care of the consumer in advance.
All brand products are built in such a way that the buyer spends a minimum of time gluing the protective glass.
Considering that the Chinese brand Mocoll (our review) has been producing protective glasses for several years, the company’s engineers have thousands of hours spent in research laboratories.
Glasses are produced using high-tech equipment and in the process of processing they obtain a number of important properties. Mocoll glasses:
- They are only 0.33 millimeters thick. The glass is uniform and of equal thickness at any point. Mocoll has one of the lowest manufacturing tolerances among glass manufacturers.
- Mocoll glasses easily withstand the impact of sharp objects and do not shatter into fragments on impact.
- Hardness at 9H on the Mohs scale. Higher only in diamond.
- The glasses have an oleophobic coating, so after gluing you will not feel any tactile changes from interacting with the iPhone screen.
- Mocoll supplies its products with a rich package. The set has everything to stick on glass without additional purchases and searching for a piece of fabric or a plastic card to eliminate bubbles.
Mocoll has several options for safety glasses at once. 2.5D, 3D and advanced development. 3D glasses with elastic edges to match the color of the device body.
As you can see above, it is very easy to install Mocoll safety glasses. Due to the presence of a special silicone layer, you can not worry about the appearance of hated bubbles during gluing.
Let’s get started
Cleaning up the iPhone display.
To do this, we use any microfiber cloth so as not to leave anything superfluous on the screen.
You can also use an alcohol wipe and then wipe the display with a microfiber cloth with a soft cloth.
Additionally, we clean the smartphone screen using the bundled tape or any other sticker.
Just touch the display with tape and lift it back up. The adhesive surface will collect dust residues.
Now you need to remove the protective film from the adhesive side of the glass and attach it to the screen.
Important: hold the glass by the edges so as not to leave unnecessary marks on it.
Place the glass gently on the iPhone screen.
If the glass is good, it will fit on the smartphone screen by itself. But for greater confidence, you can smooth it yourself.
We run our finger through the center of the smartphone and start smoothing until all bubbles are removed. If there are any small bubbles left, take a plastic card and, using light pressure, slide it over the areas where the bubbles are formed.
How to do it
Remove the iPhone case before gluing the screen protector. If the iPhone display is already covered with old film or glass. feel free to remove it. Wash your hands thoroughly to avoid getting dirt on the screen.
It is best to glue in a well-lit place to see every speck that hits the screen of the device. Well, choose the cleanest surface for the glass sticker.
For every taste, color and wallet
Mocoll literally has glasses of all shapes and sizes. The assortment includes glasses for tablets and smartphones (and not only for Apple), there is also protection for MacBook.
Among the most interesting options is special glass with anti-glazing protection.
It works in such a way that after gluing, you can see what is happening on the iPhone display only strictly at a certain angle. That is, you, as the owner, can calmly correspond or watch a movie, and the passenger sitting next to the bus, with all the best will not see anything.
The glasses are designed in such a way that they refract the light emanating from the screen, making the picture inaccessible to others.
Mocoll glasses are very popular. Many service centers and workshops use accessories from this manufacturer. They are really very durable.
Location 690 018, Vladivostok,
Volkhovskaya st. 26a, office 9.