How to open a Samsung phone case

How to open the back cover of a Samsung phone

Let’s find out in what ways you can open the back cover of your Samsung mobile phone. No mobile phone is complete without a SIM card. This is a small chip that provides us with cellular services. On some Samsung models, you need to remove the cover to gain access to the slot where the chip is inserted. And also Micro-SD. a flash drive for a mobile device. Or get to the motherboard for repair.

Method to remove cover on Samsung J5 phone

Recently, developers of mobile phones of various brands have begun to create cases in which the back cover is simply absent. In fact, it exists, but it is not possible for ordinary users to open it without special devices. For example, the two parts of the Samsung J5 are glued together. And in order to glue them, the body must be exposed to heating at a temperature of 100 degrees. This will require a hot air gun.

Before opening the case, be sure to remove the cells for the SIM card and flash drive.

The muzzle of the hot air gun must be directed towards the back of the Samsung and its seams. Then you need to arm yourself with a plastic card or a plastic scalpel to pry the front screen module.

The lid is not a thin plastic sheet, as in classic smartphones, but rather a depression in the form of a bath. You should be very careful when working along the seam of your phone with a card. Don’t run it too deep. 0.5 cm is enough. Be careful not to disrupt important phone modules.

When the lid yields, do not rush to open the case completely, do it with caution. After all, both parts exchange information using a wide ribbon cable that connects the screen module and the Samsung motherboard.

To disconnect the ribbon cable, you need to open the mount cover and remove the ribbon cable from the socket. It’s pretty simple. The main thing is not to rush and be attentive.

How to open the back cover on Samsung Galaxy S7 Edge

Let’s take an example of how specialists open non-removable back covers on a Galaxy S7 Edge smartphone. It is much easier to do this when you have special equipment at hand. It resembles an ordinary vise equipped with a large suction cup.

It serves as a holding tool for the back of the case. No hot air gun is needed with this equipment. Since it refers to methods that have a certain share of the risk of breaking Samsung with high temperatures.

open, samsung, phone, case
  • In the middle there is a niche for a telephone. A body is placed between two rubber vise holders;
  • The cover of the device closes and the suction cup is activated. It is attached to the back of a Samsung smartphone. The joints must be moistened with alcohol or an alcohol-containing solution;

Ultimately, the glue between the parts of the case yields and the device is disassembled into two main parts. the back cover and the Samsung mobile phone module. When the cover comes off the module, you do not need to immediately open the fixture. It is necessary to remove the suction cup from the body, after which you can open the machine.

Removing the cover with the tools at hand on the Samsung Galaxy S9

The more popular model Samsung Galaxy S9 practically does not differ in the process of disassembling the case from other models. Here, everything is also glued together, the engineers at Samsung decided. But we will consider manual disassembly of the device, without any special tools. We will use the tools at hand that are in every home. For example, instead of a hot air gun, you can use a regular hair dryer to dry your hair. But use it to its fullest. Direct the hot air flow exclusively at the joints of the case.

It is necessary to warm up the glued joints with a hairdryer for a few minutes. A suction cup is also required to safely remove the back cover.

READ  How to reset the pattern on Samsung

    Attach the suction cup to the top or bottom of the Samsung Galaxy S9 case. Gradually start pulling the cover away from the screen module. It’s nothing that at first she won’t give in. Do this regularly but effortlessly. After a while, a gap will begin to appear between the body and the lid;

Samsung Cover Opening Tools

  • Attach the suction cup to the top or bottom of the Samsung Galaxy S9 case. Gradually start pulling the cover away from the screen module. It’s nothing that at first she won’t give in. Do this regularly but effortlessly. After a while, a gap will begin to appear between the body and the lid; Attach the suction cup to the Samsung back cover
  • Insert a plastic card or plectrum into it; Insert a guitar pick or plastic card into the hole that appears
  • Gradually insert plastic objects into the new holes so that they do not stick together again; A pick inserted into the hole between the lid and the Samsung case
  • Move the guitar pick further so that the lid gradually peels off.

In this simple way, you can easily open the back cover on almost any Samsung mobile phone.

How to close the lid back

It’s even easier here. you don’t even need your nails. Take your smartphone and place it in the plastic case. Make sure that all elements such as buttons and camera line up with the slots on the cover. Slightly press the phone to the body and walk in this way around its entire perimeter. You will hear characteristic clicks. Done! Now you know how to open the lid of your BQ smartphone without damaging the case and screen. If something is not clear. watch a special training video.

The modern mobile phone was created to simplify our life. In practice, however, difficulties may arise.

So, some device users note that not all phones are comfortable to use or not as advanced as their predecessors.

Therefore, this annotation will be needed for you if you do not understand how to open the cover on a Samsung Galaxy A3.

After all, it becomes so unpleasant when you do not understand how to open the back cover. and close, as luck would have it, there is no one who can give you a hint or help.

But everything is not so sad, and at this point you will find out how in this case you need to properly handle the Samsung Galaxy A3.

If you ask the majority of users the question: “How to remove the cover on Samsung A3?”, They will not be able to answer anything.

It seems that the company-developer decided that in order to perform such an act, we must contact the phone service centers.

open, samsung, phone, case

How to Remove the Samsung Galaxy S8 Back Glass Cover

In the centers, specialists will do it simply and quickly. After all, for this they have a set of special tools: a “spatula” (a device that disconnects the mounts) and a Phillips screwdriver.

But what if you do not have the ability to contact specialists or simply do not have enough time to visit the service center? There is only one way out. to independently remove the back cover from the Galaxy A3.

Sequencing

  • The first step is to take out the SIM card tray. If you leave it in its original position inside the case, then it will interfere with the removal of the lid.
  • Disassembly starts with the procedure for opening the latches around the perimeter of the gadget. Opening the back cover is not so easy. it takes a lot of effort to cope with the task. But this must be done very carefully. The best and safest way to open the device is to use a special spatula for working with telephones. And certainly in no case should you use sharp objects that can cause scratches when working with the back cover. You need to start opening the latches from one corner of the phone, gradually moving to another.
  • When the latches have succumbed to action, slowly and carefully remove the back cover on Xiaomi Redmi or Mi Max. Smoothly open the case, seeing there a train connecting the back surface to the touchscreen. Carefully remove the ribbon cable to detach the front panel.
  • Now we have before us the “stuffing” of the Mi smartphone. Here we see the top panel with the installed chip and cameras. The battery is located under them. Most often, the question of how to remove the back cover of Xiaomi Redmi or Mi Max appears when it is necessary to replace the cameras or the battery. This is also relevant if the touchscreen is damaged, but without additional complex equipment, you definitely cannot solve this task at home.
  • Although the insides of the smartphone are open to us, we still cannot extract them. In addition to cameras. we can get them if we open the seal, easily pry off with any flat object at hand.
  • If you disassemble the phone to replace the battery or dig into the chip, then you have to work with a screwdriver. Internal elements are bolted to the cover. We unscrew them with a screwdriver, be sure to fold them in a conspicuous place so as not to lose, and only after that we can continue parsing. Loose bolts need to be given special attention. those that are attached from the top are longer than those screwed from the bottom. Therefore, put them in different places so as not to get confused.
  • After unscrewing the bolts, open the protective panel from above, and a chip will appear in front of you. It is not recommended to make any changes to its configuration on your own.
  • I close the back cover in the same way as I open it, but, of course, the steps are performed in the reverse order. The main thing is to be careful and act carefully, and then everything will work out.
READ  Samsung does not see the memory card

To get a more accurate idea of ​​how to properly open the Mi Max phone and other models from Xiaomi, we suggest that you familiarize yourself with the training videos.

Today Apple’s products are perhaps one of the most recognizable in the world. And the iPhone has long ceased to be just a smartphone with an apple logo on the back. He is a sign of taste and status and an indispensable attribute of a successful person. But, being a fragile thing, like most equipment, the iPhone is often damaged during active use.

Scratches, chips and abrasions spoil the appearance of the device, undermining the authority of its owner. Sometimes replacing the back cover becomes a necessary measure, but what if there is no time to visit the service center? This manipulation can be done at home, following simple instructions.

How to remove the back cover of a Samsung Galaxy

Samsung Galaxy repairs usually involve removing the back glass or back cover. Here’s how to open the back cover of a Samsung Galaxy.

Why do I need to open my smartphone

The simplest and most important reason is to install a SIM card in a new gadget you just bought, as well as to install or replace an SD memory card, which is included in almost every Strike BQs phone. The micro-SD card allows you to expand the internal memory by another 128 GB, which is undoubtedly a plus.

Many smartphone owners reboot a frozen device by pulling out and reinstalling the battery of the gadget. Also, the user may need to open the cover to replace an old or non-working battery with a new one. In addition, if you started an independent repair or replacement of parts in a gadget, you cannot get close to the insides of the phone without removing the back panel.

So, let’s look at a detailed algorithm of actions with which you can open the BQ phone and see what is in the inside of it.

How to remove the back cover of a Samsung Galaxy

Samsung Galaxy repairs usually involve removing the back glass or back cover. Here’s how to open the back cover of a Samsung Galaxy.

Send texts and calls from PC

One of the best features of your phone. it is the ability to send text messages and call directly from your computer.

Sending text messages is easy. Just tap the Messages tab to see all your recent conversations as if you were doing it on your phone. Select a recipient, enter your message and click “Send”. You can also cut and paste content between your computer and phone. Just copy the content you want to share. for example, a block of text or an image in a Word file. and paste it into your message.

To make calls, you need to connect your computer to your phone via Bluetooth. You will be prompted to do this when you go to the Calls tab on your PC, but you can also do it manually in Windows settings under Devices, then Bluetooth and other devices. “Click Add Bluetooth or other device. »And select your smartphone. Make sure Bluetooth is turned on in your phone so that your computer can see it.

On the “Calls” tab you can now see the log of your recent calls. There is also a search bar for viewing contacts on the phone. Please note that when making calls from the Your Phone application on your computer, the call is actually made by your phone, but the sound will go through your computer.

READ  How to connect Samsung watch to Honor

How to open the cover of a Samsung phone

Method to remove cover on Samsung J5 phone

Recently, developers of mobile phones of various brands have begun to create cases in which the back cover is simply absent. In fact, it exists, but it is not possible for ordinary users to open it without special devices. For example, the two parts of the Samsung J5 are glued together. And in order to glue them, the body must be exposed to heating at a temperature of 100 degrees. This will require a hot air gun.

Warming up the case with a hot air gun

Before opening the case, be sure to remove the cells for the SIM card and flash drive.

samsung A10 back cover open | Pardeep Electronics

The muzzle of the hot air gun must be directed towards the back of the Samsung and its seams. Then you need to arm yourself with a plastic card or a plastic scalpel to pry the front screen module.

Use a plastic card to pry off the case seams

The lid is not a thin plastic sheet, as in classic smartphones, but rather a depression in the form of a bath. You should be very careful when working along the seam of your phone with a card. Don’t run it too deep. 0.5 cm is enough. Be careful not to disrupt important phone modules.

Use a plastic card to open the Samsung case

When the lid yields, do not rush to open the case completely, do it with caution. After all, both parts exchange information using a wide ribbon cable that connects the screen module and the Samsung motherboard.

Screen module flex cable in Samsung

To disconnect the ribbon cable, you need to open the mount cover and remove the ribbon cable from the socket. It’s pretty simple. The main thing is not to rush and be attentive.

This can be useful: how to move to a memory card on Samsung: photos, applications, data.

Set up the Your Phone app on your PC

It’s easy to connect your Galaxy smartphone to your computer. First step. install the “Your Phone” application on your computer.

  • Go to Microsoft Store, find your phone and download it.
  • Click Sign In to sign in to your Microsoft account. Make sure you are using the same account as when you sign in on your smartphone, as described below. After logging in, click the blue “Run” button.
  • Your phone will launch on your PC and ask for your mobile OS. Select Android and click “Get Started”.
  • When the setup process is complete, your phone will ask you for your phone number so that it can send a text message to the device.
  • Then you will see a screen with the message: “Open the application“ Your phone. Link to Windows. ”“ It’s time to set up Link to Windows on your Galaxy.

How to open the back cover on Samsung Galaxy S7 Edge

Let’s take an example of how specialists open non-removable back covers on a Galaxy S7 Edge smartphone. It is much easier to do this when you have special equipment at hand. It resembles an ordinary vise equipped with a large suction cup.

Cover opener on a Samsung smartphone

It serves as a holding tool for the back of the case. No hot air gun is needed with this equipment. Since it refers to methods that have a certain share of the risk of breaking Samsung with high temperatures.

  • In the middle there is a niche for a telephone. A body is placed between two rubber vise holders;
  • The cover of the device closes and the suction cup is activated. It is attached to the back of a Samsung smartphone. The joints must be moistened with rubbing alcohol or an alcohol-based solution; Attaching the suction cup to the back cover of your Samsung smartphone
  • The pressure regulator, which is located on the right, comes into play. When tightening it, the smartphone body is held by a rubber vise, and the suction cup “pulls” up; Pressure regulator in the device
  • The adjuster is hand-tightened, but does not tighten tightly as we are dealing with a fragile material. Every few minutes we tighten the regulator further.

Ultimately, the glue between the parts of the case yields and the device is disassembled into two main parts. the back cover and the Samsung mobile phone module. When the cover comes off the module, you do not need to immediately open the fixture. It is necessary to remove the suction cup from the body, after which you can open the machine.