How To Make More Brightness On A Laptop

The first way

The easiest way to start is best. In order to use it, you need 5 seconds of time.

At the bottom of the desktop in the notification area (tray) there is a certain number of icons. Find the icon in the form of a battery and click on it with the right mouse button, after which a menu will appear in which you need to select the item “Windows Mobility Center”.

A window with a lot of settings will open in front of you, including, for example, adjusting the sound and, of course, adjusting the brightness level of the laptop screen. Just move the slider to one side or the other, thereby adjusting the brightness to your liking or desire.

make, brightness, laptop

Third way

If you are NOT looking for easy ways, you can use the third, slightly more difficult way.

Go to the control panel, select “System”. “Power supply”. “Power settings” (in some cases, the item is called “Setting the display off” or “Setting the power plan”). This will take you to a menu with which you can apply specific settings for your device. Including: brightness of the screen when using AC or battery, dimming the display after a certain time, putting the computer into sleep mode, etc.

It is worth remembering that in some models of laptops, as a rule, expensive ones, there is an automatic brightness control function, which in turn depends on external lighting. This feature can be disabled.

In cases where the brightness does not change, do not rush to carry the laptop to the service. The fact is that if it does not work from the mains, but from the battery, then the screen brightness may NOT exceed a certain level in order to save energy. This setting can usually be changed.

But if the brightness does NOT increase in any of the modes, this may really be due to the health of the screen.

Blog of the young admin. A fascinating blog of enthusiastic IT specialists. Second way

If for some reason you are unable to use the method described just above (for example, the Windows Mobility Center function is missing), you can try using another option.

There is a special Fn key on the laptop keyboard. it is used to type alternative commands. One of THESE commands is to adjust the brightness of the screen. Typically, brightness is indicated by a sun icon (filled and empty). Accordingly, to adjust the brightness, you need to hold down the Fn button, and then click either on the filled sun to increase the brightness, or on the empty sun to darken. You don’t need to press anything else.

Typically, the keyboard icons are located among the F1-F12 keys, less often they are located in other places.

How to increase screen brightness on a laptop?

Users who have previously worked exclusively on a desktop PC may be somewhat surprised to start working on a laptop. One of the main features of a laptop screen is that you simply cannot adjust the brightness on it in the same way as on a regular monitor. there is no separate button or wheel for this.

At the same time, by default, the screen brightness is usually such that it can cause significant inconvenience to the user’s eyes. it is at a very low level, as a rule, to save energy, since it is the screen that is one of the main consumers of energy.

Today I will show you how to decrease or increase the brightness on your device. I will show an example on Windows 7, although there are differences between the second operating systems, including the still popular XP. In addition, this manual is suitable for most modern laptops manufactured by companies such as Lenovo, Acer, Sasmung, Asus, Dell, Sony, etc.

Post comments “How to increase screen brightness on a laptop?

On Windows 8, I don’t have any mobility center. Disconnected using the second method.

Actually there is, I don’t know why you did NOT find.

It’s okay, thanks. There is only one problem. the brightness adjustment is uneven and it turns out either too light or too dark.

If you use the buttons to adjust the brightness, then this is normal. Range step is apparently large.

I don’t have suns, like in the second picture.

It may be that the brightness is simply not enough for the screen?

That’s the time, if only that is unlikely, this is not a picture tube as in old TV sets))

If none of the cases have such functions, what to do? After reinstalling Windows, a lot of what functions have disappeared

RE: If none of the cases have such functions, what to do? After reinstalling Windows, a lot of what functions have disappeared

In the power saving settings. Screen. Enable adaptive brightness setting. Values ​​Convert To. Off.
And there will be happiness)

Can anyone help (at f12 wanted to increase the brightness)? It began to go down and went down to a minimum, no way helps (Control Panel, Windows Mobility Center)

I have the slider set to the maximum, but it’s still dark (

Thanks, all worked well

What to do if the buttons for increasing and decreasing brightness on F11 and F12 do not work for me?

Power settings

This method can be used exclusively by owners of mobile devices with Windows 10 installed. It will allow you to separately adjust the brightness of the device when working on AC and on battery.

    Open the “Control Panel”. You can read about all possible ways to do this in our separate article. We use the key combination “WinR”, enter the command “control” and press “Enter”.

Choose from the list the section “Power supply”.

Next, you need to click on the line “Setting up the power supply scheme “opposite the scheme that you have active.

A new window will open. It is in it that you can set the brightness indicator for both modes of operation of the device. You just need to move the slider to the left or right to change the parameter. Remember to click the Save Changes button after making your changes. It’s at the bottom of the window.

Notification Center

This method is very simple, but it has one drawback. The fact is that with it you can only set a fixed brightness value. 25, 50, 75 and 100%. This means that you will NOT be able to set intermediate indicators.

    In the lower right corner of the screen, click on the “Notification Center” button.

  • A window will appear in which various system notifications are usually displayed. At the very bottom you need to find the “Expand” button and press it.
  • This will open the entire list of quick actions. The brightness change button will be among them.
  • By clicking on the indicated icon with the left mouse button, you will change the brightness level.
  • When the desired result is achieved, you can close the “Notification Center”.

    Brightness change methods

    Let us immediately draw your attention to the fact that all of the steps described below were tested on Windows 10 Pro. If you have an operating system of a different edition, Some items may simply not exist for you (for example, Windows 10 Enterprise ltsb). Nevertheless, one of the above methods will definitely help you. So, let’s start describing them.

    System parameters

    You can also adjust the brightness level of the monitor using the standard OS settings. Here’s what you need to do for this:

    • Press the left mouse button on the “Start” button in the lower left corner of the screen.
    • In the window that opens, a little above the “Start” button, you will see an image of a gear. Click on it.

    Next, go to the “System” tab.

    After you set the desired brightness, the window can simply be closed.

    Change brightness on Windows 10

    All computer and laptop users always customize the operating system based on their own tastes and preferences. But there is a category of people who simply do not know how to change this or that parameter. In today’s article, we would like to tell you about several ways that will help you adjust the screen brightness level in Windows 10.

    Multimedia keyboards

    This method is one of the most popular today. The fact is that most modern PC keyboards and absolutely all laptops have a built-in brightness change function. To do this, hold down “Fn” on the keyboard and press the decrease or increase the brightness button. Typically, these buttons are located on the left and right arrows

    Or on “F1-F12” (depends on the manufacturer of the device).

    If you don’t have the ability to change the brightness using the keyboard, then don’t be discouraged. There are other methods to do this.

    Windows Mobility Center

    This method by default can be used only by owners of laptops with the operating system Windows 10. But there is still a way that will allow you to enable this option on a stationary computer. We will talk about this below.

    • If you are the owner of a laptop, then press the “WinX” keys on the keyboard at the same time, or press RMB on the “Start” button.
    • A context menu will appear in which you need to name it on the line “Mobility Center”.

    As a result, a separate window will appear on the screen. In the very first block, you will see the brightness settings with a standard adjustment bar. Move the slider on it to the left or right, you will decrease or increase the brightness, respectively.

    If you want to open this window on a regular PC, you will have to edit the registry a little.

    • Press the “WinR” keys on the keyboard at the same time.
    • In the window that appears, register the command “regedit” and press “Enter”.
  • On the left side of the window that opens, you will see a folder tree. Open the section “HKEY_CURRENT_USER”.
  • Now, in the same way, open the “Software” folder which is inside.
  • This will open a longer list. In it you need to find the “Microsoft” folder. Click on it with the right mouse button and select the “Create” line in the context menu, and then click on the “Section” item.

    READ  Why is the sound on the laptop quieter

    The new folder should be named “MobilePC”. Next, you need to create another one in this folder. This time it should be called “MobilityCenter”.

    Right click on the MobilityCenter folder. Select the line “Create” from the list, and then select the item “DWORD Parameter”.

    The new parameter should be named “RunOnDesktop”. Then you need to open the created file and assign it the value “1”. After that, click the “OK” button in the window.

    Now you can close the registry editor. Unfortunately, PC owners will NOT be able to use the context menu to call the mobility center. Therefore, you need to press the “WinR” key combination on the keyboard. In the window that appears, enter the command “mblctr” and press “Enter”.

    If you need to call the mobility center again in the future, you can simply repeat the last point.

    Change monitor settings on stationary computers

    All of the above methods are applicable mainly to laptops. If you want to change the brightness of the image on the monitor of a stationary PC, the most effective solution in this case would be to adjust the corresponding parameter on the device itself. To do this, you need to follow a few simple steps:

      Locate the adjustment buttons on the monitor. Their location depends entirely on the specific model and series. On some monitors, such a control system may be located at the bottom, while on other devices. on the side or even on the back. In general, the Mentioned Buttons Should look something like this:

  • If the buttons are not labeled or not accompanied by specific icons, try to find the user manual for your monitor on the Internet, or try to find the desired parameter by brute force. Please note that some models have a dedicated button for brightness control, as shown above. On the second devices, the required parameter may be hidden a little deeper in a separate menu.
  • Once the desired parameter is found, adjust the position of the slider as you see fit. Then exiting all open menus. Changes will be visible to the eye instantly, no reboots after the operations done will be required.
  • If in the process of adjusting the brightness you have any difficulties, you can simply write the model of your monitor in the comments, and we will give you a more detailed guide.

    This is where our article has come to its logical conclusion. We hope that one of the listed methods will allow you to set the desired monitor brightness level. Also, do not forget to periodically clean the operating system from garbage in order to avoid various errors. If you do not know how to do this, then read our tutorial.

    How to adjust screen brightness

    You can work, play or spend time on the Internet at the computer at different times of the day. For example, in the daytime with good lighting, the screen should also be bright enough to normally see what is displayed on it, and you didn’t have to peer. But at night, on the contrary, it is better that it be a little muffled and NOT hit in the eyes.

    Therefore, in this article, we will figure out how you can change the brightness of the screen on your computer or laptop in various ways.

    Let’s start with the PC. Everything is quite simple here. Since there is a need to save battery power, the brightness is rarely adjusted here. Special buttons are used for this, located on the monitor. They can be located either below or slightly behind. Find the one with the sun and pointer icon. If the pointer is directed downwards. this is a decrease in brightness, up. an increase.

    Now I’ll tell you about laptops. Here This procedure is used more often, especially if the device is disconnected from the mains and you need to slightly increase its battery life.

    You can use the “Fn” key for this in various combinations, which differ depending on the manufacturer of your laptop. Let’s give examples for the most popular.

    If you have ASUS then hold down “Fn” and press the “F5” button. To reduce, or “F6”. To add brightness.

    On Lenovo laptops, use the up and down arrows to do this. Press “Fn”. And then the desired button. Just pay attention, for example, in the screenshot, the arrow points up, and under it is an orange sun with a down arrow, which means this button will reduce the brightness.

    On HP, the combinations can be different or, as in the picture below, “Fn” and “F2-F3”. Or “Fn” and “F9-F10”.

    If you have a device from a second manufacturer, then I think you understand which buttons to look for. They should have an image of the sun. one larger, the second smaller.

    The second way of adjustment is through the “Control Panel”. Click on the “Start” button and select the desired item, for those who have Windows 7. If you have Windows 10 installed then right-click on Start and select the item of interest.

    Next, in the “Large icons” view mode, find and click on the “Power supply” item.

    At the bottom of the window that opens there will be a slider, which we move either to the right to the sun, or to the left, then the brightness decreases.

    Further from the items in the left menu, select “Setting the display off”.

    In this window, you can set the display brightness separately for the laptop to work on battery and mains. Remember that the smaller it is, the longer the charge will last. At the end, do not forget to click “Save Changes”.

    You can open the required window in another way. Click on the battery icon in the lower right corner and select the item of interest to us.

    The third way is to adjust the brightness through the installed drivers for the video card. Find it in the list of Control Panel items and click on it.

    Or expand hidden applications in the tray and click on the video card icon.

    Then you need to select the item “Graphic characteristics”.

    Another option is to right-click on an empty space on the desktop and select the desired item from the menu that opens.

    Whichever option you choose, this window will open. I have a graphics card from Intel, so it looks like this. If you have a different manufacturer, the view of the window will be different.

    Here in the left menu you need to find such an item so that the “Brightness” field appears in the middle area. Move the marker to the appropriate value. Then click “OK”.

    That’s all. I think now you can easily adjust the brightness of your screen on a computer or laptop. As for me, the adjustment using a combination of keys with Fn is the easiest, and you choose the method that suits you.

    Setting by standard means

    Laptop computers anticipate the use of hot keys, with the help of which you can quickly adjust certain parameters. For example, with one click, you can completely mute the sound or turn off the built-in microphone. The same goes for adjusting brightness.

    By default, Microsoft OS includes an auto-adjust feature for notebook computers. Disable Auto Brightness and adjust the power plan as follows:

    • Open “Control Panel”.
    • Then go to the subsection “Hardware and Sound”.
    • Now open the subsection “Power supply”.
    • Opposite the name of the power scheme, click on the settings button.
    • Here you need to go to additional power options.
    • In the list, find the item “Screen”. “Enable adaptive brightness control” and set it to “Off”, then close the window with saving changes.

    Now you need to increase the brightness level for all power plans. Select one of them and click on the button marked in the screenshot:

    Drag the slider to the right position for the computer to work when disconnected from the mains and do the same with the setting for the laptop to work when connected to the charger. After that click on “Save changes”.

    Now you know how to disable adaptive adjustment and how to change the brightness on a laptop with Windows 10 (x32-bit or x64-bit) OS of any version. Unfortunately, you will not find such parameters on a stationary computer, so you will have to use other methods.

    Third party program

    If the Microsoft operating system does not allow you to change the image settings on a stationary PC, then use the third-party iBrtightness Tray or Display Tuner utility. You can find them yourself in the public domain on the Internet.

    Let’s look at the example of the Display Tuner application. Once launched, you will see the following window with a slider:

    With it you can adjust Not only brightness (1), but all other parameters. contrast (2), colors (3).

    The second tab “Geometry” contains settings for configuring the position of the image on the monitor.

    Also, using Display Tuner, you can adjust the sound level of audio tracks and video playback.

    In the “Profile” tab you can create your own profile and save it. After that, the picture settings should not be changed automatically. To enable a profile, you can use hotkeys (you can change them).

    How to increase or decrease brightness on Windows 10 PC

    With correctly selected brightness, contrast and other parameters, users will be able to spend a long time comfortably at the PC. Let’s see how to increase screen brightness on Windows 10 in different ways.

    Keyboard shortcuts and buttons on the monitor

    It remains to disassemble the last way to decrease or increase brightness, which refers more to the hardware method, rather than specifically to Windows 10.

    Laptops have separate system keys (in most cases Fn), which, in combination with others, allow you to make adjustments to dim or lighten the image on the screen (as well as change the sound level, lock the keyboard, turn off the screen, and so on). You can view the required combination in the documentation for your device or on the official website.

    READ  How To Change Password On Laptop

    What if these keys don’t work? Most likely, you have not installed the official software from the manufacturer. This happens when you reinstall the operating system yourself. Find the software package on the manufacturer’s website and install it.

    For a stationary PC, you do not need special software or a driver. the brightness will be decreased or increased using the mechanical keys on the monitor case. Changing parameters is NOT OS dependent.

    We have figured out how to change the low or high brightness level in different ways, which differ depending on your device. Each of the methods has been tested in practice. If you failed to change the display settings in one of the ways, then go to the second.

    All methods of changing brightness

    You can adjust the required brightness level of the image on the computer or laptop screen in the following ways:

    • Windows 10 standard settings,
    • Third party means;
    • Graphics card settings;
    • Hotkeys
    • Through monitor settings.

    Depending on whether you are using a desktop computer or laptop, you will have access to the adaptive adjustment function, in which we will also talk in more detail.

    How to adjust parameters through the video card driver

    Depending on which video card you are using, the following tools are available to you to manually increase or decrease the brightness:

    • AMD Control Panel for video cards from AMD;
    • NVIDIA Control Panel for NVIDIA GPUs;
    • Intel Graphics Options for Intel Integrated Graphics.

    All Presented tools are installed together with the driver and differ little from each other in terms of interface and control. Let’s take a look at the settings using an example of how to work with the “NVIDIA Control Panel”:

    • Right-click on the desktop to enter the NVIDIA Control Panel from the context menu.
    • With this tool you can change the parameters separately for video playback in the player and for the entire display. In the “Video” section, select the first tab (1). Now select “With NVIDIA settings” to unlock access to the slider (2). With their help, you can reduce or add brightness, contrast, saturation and hue exclusively for the picture in the video player. To return to automatic mode, switch the setting to “With video player settings “(3).

    Now you need to disable automatic selection of parameters for the display itself. To do this, you need to do the following:

    • Open the Display tab and go to the Marked subsection.
    • Now select the second item to unlock manual value changes. Brightness, contrast and gamma are also available here. Try to decrease or add one of the values ​​and watch how the picture on the screen changes. You can also change the Presented parameters for an individual color channel (RGB).
    • To save all changes, click on “Apply” and close the window.

    In this way, you can raise or lower the brightness through the capabilities of the video card and driver. If the parameters change, auto brightness turns on by itself, then the problem lies in the driver malfunction. To update it you need:

    • Open “Device Manager” through search or in any other way.
    • Then go to the subsection “Video adapters” and select your video card.
    • Name it with the right mouse button and click on “Update driver”.
    • In order not to put a lot of effort, you can choose automatic update (1). If you downloaded the driver distribution package from the official website in advance, then select “Search for drivers on this computer” (2).
    • Specify the folder with the driver and click “Next”.
    • After installation, be sure to restart your computer.

    If you have any difficulties, then check out the Visual instructions in the video. It covers all the methods from this article.

    Additional options for adjusting brightness

    How else can you adjust the brightness of your laptop? After you choose one of the power plans:

    • Balanced or
    • High performance

    You can call it by the link “Setting up power plans” (2 in Fig. 1). Then a window with additional parameters will open:

    1 in fig. 2. follow the link “Change advanced parameters”,

    2 in Fig. 2. click on the plus sign opposite “Screen”,

    3 in Fig. 2. open “Screen brightness”, clicked on the plus sign. If one of the numbers is named 58% (and you, of course, may have other numbers), then you can edit them and set others, more convenient and suitable for you.

    Let’s take a look at the power settings

    For the Windows 7 operating system, click Start, then Control Panel, at the end of the list that appears, click on the Power supply link.

    Alternatively, click on the Start button and enter Power supply in the lower search bar. Click on the power supply that appears in the search result.

    At the very bottom of the window “Choosing a power plan” Move the “Screen brightness” slider to adjust the brightness (number 1 in Fig. 1, pictures are clickable):

    If the slider for Screen Brightness” is inactive, that is, does NOT respond to attempts to move it, this may mean that the laptop is not designed to adjust the brightness of the screen (laptop manufacturers saved on this), or it is worth updating the monitor drivers.

    How to set the time after which the laptop screen dims?

    Go to Start. Control Panel. Power Supply (Fig. 1). Click on the “Power plan settings” button (number 2 in Fig. 1). The Power Plan Settings window will open:

    Here you can select the time for the “dim display” and “turn off display” options for battery and mains operation. Do not forget to click the “Save Changes” button if you have made any changes.

    Filling in the Gaps. Expanding the Horizons! How to change laptop screen brightness?

    I answer the following question: my nephew worked, the brightness of the laptop screen changed, how to restore?

    Let’s consider three options for changing the screen brightness:

    • Using power supply (Most workable option),
    • By pressing the function keys of the laptop,
    • Using a special program built into the laptop.

    Computer literacy with Hope

    Pros and cons of function keys when adjusting laptop screen brightness

    The laptop has function keys to change the screen brightness among F1-F12 with the image of the sun and next “” to increase brightness, or “-” to decrease. One must keep Fn and the corresponding from F1-F12.

    The bad method is that Windows can then easily return everything back. Therefore, it is better to make settings using a proprietary Windows 7 tool, that is, through the Power Supply, described at the beginning of the article.

    By the way, if you reinstall the laptop operating system to a non-native distribution, then many of the capabilities of the laptop function keys will NOT work, alas.

    Changing the brightness of the laptop screen using a special program

    Advanced laptops may have their own advanced options for adjusting screen brightness. For example, AUTOMATIC screen brightness control. If you set this parameter, the screen brightness will automatically increase in bright light and vice versa.

    For example, the Sony Vaio has such settings in the Vaio Control Center program.

    Choosing an option “Display”, and in it. “Automatic brightness settings” (number 1 in Fig. 4). Here you can uncheck the box next to the option “Automatic brightness control” (number 2 in Fig. 4). Don’t forget to press “OK” (number 3 in Fig. 4). So that the changes are saved if they have been made.

    Secondly, laptop models about such settings (or their absence) can be found in the instructions for this laptop, which can be in paper or electronic version.


    Owners of desktop computers do not need to access the operating system at all to configure the desired monitor screen parameters. Every monitor from Samsung to Dell has setting buttons. Here you can adjust the brightness, colors, contrast, picture position. This is how the buttons are located most often so that it is very difficult to see their designations, I recommend using the instructions for the monitor with the designation of the buttons. This will save time.

    Using the keyboard

    The easiest way to adjust the display backlight on a laptop is to use the buttons on the keyboard. Regardless of the brand, whether it is Samsung or Lenovo, they are located on the function keys F. Usually, the symbol of a lit light is used to indicate brightness. In order for the keys to perform the adjustment function, the Fn button additionally clamps. In some cases, the same function is carried out on the up and down buttons. This is found in notebooks Acer, HP. The method works on a computer, provided that the keyboard is multimedia. Most office accessories do not have this function. Additionally, a keyboard driver may be required.

    Video adapter settings

    Owners of equipment with a video card from AMD Radeon or GeForce have the ability to customize the operation of the screen using proprietary software. To do this, press RMB on the desktop. We are interested in “NVIDIA Control Panel” or “AMD Control Panel”. If there is such an item, then you should update the video card driver. The utility will appear with a new driver. Both programs open up ample opportunities for fine-tuning the device. The utilities are in Russian and it’s easy to understand their work. It is enough to select the desired item and adjust the parameters.


    Another easy way to adjust brightness is by clicking on the battery icon. A similar brightness control will open as in the center of notifications. If here they are named according to the parameters of the battery, then a menu will open in which the behavior of the screen is configured when the laptop switches to power saving mode. The backlight becomes minimal.

    Those who like to control all the processes in the device can set how to properly illuminate the display when operating on mains or battery power. To save the battery, you can set a lower backlight, and when there is such a need, the brightness can be set to maximum. To do this, go back to the system settings and select “Power and sleep mode”. Click on “Additional Power Options”. After we select the power scheme setting.

    READ  How to enable keyboard on Windows 10 laptop

    Similarly, for all of the above methods, configuration is carried out on a PC. At the same time, regardless of the version of the operating system. Pro, Home or Business.


    If the proposed options are not suitable, for example, a 25% change does not give an optimal result, you can go to the OS parameters and set all the necessary values ​​there. To do this, reopen the notification icon and click on “All parameters”. Here we are interested in the item “Display”. It has a slider that will allow you to adjust the brightness of the screen more accurately.

    Notification Center

    Owners of appliances running Windows 10 can adjust the backlight level in the Notification Center. In the lower right corner next to the clock there is a notification icon. To do this, click on the icon and in the window that opens, find the item “expand”. After clicking on it, the settings will open, among which there is a brightness setting. It changes by pressing. Step. 25%. Here you can also pay attention to one more item. Night light. When this mode is activated, the colors will be inverted so that the eyes are least affected at night. Those who often work in the dark with the lights off can use the mode, it has been tested in practice. the eyes really get tired less.


    To adjust the brightness and contrast on the screen, you can refer to the personalization settings. We go into the system parameters. Open the main menu and go to the item “Personalization”. We enter the menu “Background” and on the side we find the item “High contrast settings”. Here are the settings we need. This menu is quite specific and does not greatly affect the contrast. Therefore, I recommend using the third-party Display Tuner application. The program is good with a lot of settings. It allows you to adjust Not only the brightness of the screen, but the contrast and colors. In the next tab, you can set the position of the picture on the screen, moreover, here you can adjust the sound level. The application is in English, but it is quite easy to deal with it even without knowing the language.

    We adjust the brightness of the monitor on Windows 10. How? I tell

    Good day, Dear readers and subscribers of my blog! When working on a computer or laptop, it may be necessary to change the brightness of the monitor. There are a number of ways to adjust the brightness of your monitor on Windows 10. Today we will look at each of them.

    Task bar

    All the methods listed above are good. They do NOT require special skills, but you still have to go somewhere and do something. Everyone wants to simplify the process as much as possible and adjust the brightness through the taskbar. Relatively recently, such an opportunity has appeared in Windows 10 owners. For the regulator to appear on the panel, you need to install the Brightness Slider application. After installing it, a slider appears, which adjusts the brightness in the same way as adjusting the sound.

    There are many ways to adjust the backlight. Which one to choose depends only on the user. Some options only offer brightness control, others open up more options. In my opinion, you shouldn’t go deep into the settings of the screen parameters. From personal experience of working on devices from different brands, I think that the default settings are set in the best way and the only need that arises for me is to adjust the brightness depending on the time of day.

    Thanks for attention! Until next time on my blog! Best regards, Rostislav Kuzmin.

    Adjusting screen brightness in Windows 10

    In today’s article, we will look at all the ways with which you can change the screen brightness in Windows 10.

    Adjusting the screen brightness using the keyboard.

    Some keyboards, mostly in laptops, have keys to change the screen brightness. The sun is often drawn on such keys, most often they are located on the top row of keys, on some devices Samsung saw them on the arrows. Some keys decrease or increase the brightness as soon as you press them, and on some devices you first need to press and hold the Fn key and press the decrease or increase the brightness.

    On some HP devices, the brightness keys look like this:

    On some Samsung devices, the keys for changing the brightness look like the figure below, and if in HP it was enough to press one F2 or F3 key to change the screen brightness, then in Samsung you need to press and hold the Fn key and press the up arrow. To increase brightness, or down arrow. To reduce it.

    Adjust screen brightness in action center.

    1.Open “Notification Center”. The icons in the action center can be collapsed or expanded if yours is expanded. Proceed to the next item if collapsed. Press on “Expand”;

    Among the many buttons, one will adjust the brightness, each time you press it you will decrease or increase the brightness by 25%. For example, I clicked on it once. You will decrease the brightness to 75%. Again. Up to 50%, third time 25% and fourth time 0%, the next press will increase the brightness.

    Adjusting screen brightness in Power settings.

    If your device has a battery. On the taskbar, you have a battery icon, clicked on it you can also change the brightness.

    Click on the battery icon on the taskbar with the left mouse button and in the power options that open, adjust the brightness by clicking the left mouse button on the brightness tile. Each click on the tile will decrease or increase the screen brightness by 25%.

    Adjusting screen brightness in System Settings

    Go to the “Start” menu and open “Options”;

    2.Select “System”;

    On the left side should be selected “Screen”, and on the right side near “Adjusting the brightness level” move the slider with the left mouse button, thereby adjusting the screen brightness.

    After choosing the optimal brightness, the system parameters window can be closed.

    Adjusting screen brightness in power management.

    1.Click on the “Start” menu with the right mouse button and select from the menu that opens “Power management” (can also be opened via “Control Panel” or the battery icon on the taskbar).

    At the bottom of the window near “Screen brightness” move the slider with the left mouse button to the left or right, thereby increasing or decreasing the brightness of the screen. After selecting the optimal brightness. Close the window.

    Adjusting the screen brightness in the power scheme setting.

    1.Click on the “Start” menu with the right mouse button and select from the menu that opens “Power management” (can also be opened via “Control Panel” or the battery icon on the taskbar).

    There is a dot in front of the active power plan, click next to it with the left mouse button on “Setting up the power plan”.

    3.Here you can move the sliders to adjust the brightness when the system is running on battery power and separately the brightness from the mains. After choosing the optimal brightness, click on “Save changes” and close the window.

    Adjusting screen brightness in advanced power options.

    1.Click on the “Start” menu with the right mouse button and select from the menu that opens “Power management” (can also be opened via “Control Panel” or the battery icon on the taskbar).

    There is a dot in front of the active power plan, click next to it with the left mouse button on “Setting up the power plan”.

    3.Click on “Change advanced power settings”;

    Press the left key on the plus before “Screen” = open “Screen brightness” = select on battery or mains and use the left mouse button to change the brightness as desired. After choosing the optimal brightness, click “OK” and close all windows.

    Adjusting screen brightness in PowerShell.

    1.Open PowerShell as administrator: one of the ways to write PowerShell in the search bar, right-click on the Found option and select “Run as administrator”.

    To change the brightness, we will use the command (Get-WmiObject.Namespace root / WMI.Class WmiMonitorBrightnessMethods).Wmisetbrightness (1, brightness)

    For example, to set the screen brightness to 70%. You need to enter the command (Get-WmiObject.Namespace root / WMI.Class WmiMonitorBrightnessMethods).Wmisetbrightness (1.70) and press Enter.

    Number instead of “Brightness” You can put any, after choosing the optimal screen brightness. Close PowerShell.

    You can also change the brightness on the monitor screen itself, if it has keys. That’s all for today, if you have add-ons or you know other ways to change the screen brightness. Write your comments! Good luck to you