Laptops and Tablets • Recommendations and advice

iPhone

How to insert a SIM card into iPhone 7

Where and how is inserted

Most smartphones are designed to fit a SIM card into a slot under the battery. The smartphone device does not involve dismantling the battery by the owner. The subscriber module is installed in a special hatch in the body of the device. over, the card is not pressed against the reading board, but first is placed in a retractable slide.

insert, card, iphone

On the first Apple devices, the connector for installing the subscriber module is located at the top of the smartphone, above the head speaker. From model “5” the SIM card slot “moved” to the right side panel, where it remains to this day.

Access to the tray is limited by designers: in order to remove the slide from the SIM, you need to open it using the proprietary key included in the delivery set (by default, it is in an oblong white envelope).

Preparing for the first launch

Preparation for the initial launch of the iPhone consists in unpacking and visual inspection of the gadget. After unpacking the box, make sure that it contains all the components of the kit declared by the manufacturer, namely:

  • a smartphone packed in a plastic protective form;
  • sync cable and power adapter;
  • an envelope made of thick white paper with a needle for opening the SIM card slot;
  • Apple Airpods headphones;
  • decorative elements;
  • headphone adapter.

Before starting, pay attention to the controls of the gadget. On models “5” and “SE” the button responsible for locking the phone screen and turning it on / off is located on the top edge of the device. On “six” and newer models, the lock button is located on the right side of the smartphone.

On the left side panel there are volume controls and a quick switch to silent mode.

The Home button is the main one when working with the device; located at the bottom of the front of the gadget; allows you to switch between tasks, go to the main menu, call the voice assistant Siri.

The models of the families “5”, “6”, “SE” are equipped with a standard headphone input of the “3.5” type. Starting with the “seven”, there is no such connector. the headphones are adapted for the battery socket, that is, you can insert old Airpods or third-party headphones only using the original adapter from the kit.

Now that the educational program on the controls has been carried out, you can proceed to the tips for installing a SIM card.

Incorrect installation

In this case, the position of the tray with the SIM card is incorrect: there is a bias or the SIM is fixed in the wrong position. There are precedents when the SIM-card is improperly fixed in the holder (installed with the chip upwards or the current position does not coincide with the technological opening of the tray). To troubleshoot, correct the position of the “SIM”.

Possible problems with reading the SIM card and ways to solve them

When the SIM card is detected and read without errors, the device displays the name of the cellular network, signal strength, and the type of wireless Internet connection available. If, instead, “SIM card not inserted” or “No network” is displayed, the subscriber module is inserted incorrectly or there is a technical malfunction.

What to do if a paper clip was not included to open the tray

A common problem for Yabloko. Usually the factory key is lost during operation. Most relevant for those who purchase a used incomplete iPhone: the key is missing.

In this case, you need to use a handicraft analogue of a standard tool. These can be:

  • thin needle;
  • paper clip.

Before use, a paper clip must be unbent and when installing the module, work with a sharp end. In this case, the paper clip should enter the diameter of the tray larva. It’s the same with the needle. At the same time, an artisanal tool should not be brittle, because a metal fragment stuck in the hole of the tray can entail an expensive appeal to a specialized service.

There is no need to abuse such substitutes. their use over time leads to breakage of the tray opening.

Features of the used SIM card format

Starting with model “5”, iPhones are inserted into a Nano-SIM SIM card. the smallest available from telecom operators. The basic size SIM card is compatible with Apple smartphones of the first two generations. iPhone 3G and 4s were equipped with Micro-SIM slots.

  • length: 12.3 mm;
  • width: 8.8 mm;
  • thickness 0.67 mm.

It is possible to adapt the standard subscriber module to the Micro-SIM format by cutting off a part of the plastic case. An ordinary SIM card cannot be inserted into new iPhones, even if you cut out the plastic part as much as possible. in the Nano-SIM the chip itself has smaller dimensions. Therefore, in some cases, subscribers are forced to change SIM-cards in order to start using Apple products. In communication salons, it is changed on the day of treatment; the subscriber number remains the same.

How to insert a SIM card into an iPhone

The design features of Apple gadgets distinguish these devices from devices of other brands. The structure of iPhones is focused on the minimum interference of the owner in the design of the phone and user safety, which is atypical for economy-class smartphones. Therefore, at the first acquaintance with the iPhone, the newly minted “Yabloko” often do not know how to insert a SIM card and start working with the device. Further instructions are relevant for the line of smartphones iPhone 5. iPhone X.

Preparing to use your smartphone for the first time

To insert a SIM card into a new iPhone 5s or some other model, the subscriber must first prepare the phone for the first use:

  • First of all, you need to make sure one hundred percent that the iPhone is not locked due to the change of mobile operator. A huge number of iPhones are locked to a specific mobile operator. If you want to switch to a different carrier, you will need to unlock the SIM slot in your own iPhone.
  • There are a significant proportion of iPhones that have absolutely no lock.
  • If the iPhone is still locked to a specific network, it needs to be unlocked.

How to insert a SIM card into an iPhone?

The globally popular iPhone 5s smartphones and other variations are incredibly easy to use. Each original iPhone is high quality, features a wide variety of features. Despite this, the happy owners of iPhones, who took it in their hands for the first time and are preparing to use it, are stunned by the first question, namely, “How can I correctly insert a SIM card into my new iPhone?” In fact, this operation does not provide anything complicated, you just need to sequentially perform some actions. Which ones? We will talk about this further.

We select the SIM card and insert it into the phone

In order to successfully insert your SIM card into a new iPhone 5s or its other configuration, the subscriber must clearly and consistently follow the following steps:

  • Before opening the SIM slot, the subscriber needs to turn off the phone. To do this, you need to press and hold the shutdown key of the smartphone until the “Turn off” button is displayed on the screen. Swipe the button and the iPhone 5s (and any other model) turns off.
  • Recently, SIM cards have acquired a slightly different look, or rather, they have become much smaller. The main problem is that earlier versions of the iPhone do not accept new SIM cards, and vice versa, that is, the SIM that the iPhone 5s accepts, other versions of this gadget may not accept.
  • Absolutely all iPhone models, with the exception of 4 CDMA, boast a SIM slot. The predominant part of iPhones has a structure such that the slot with the card tray is on the right side, somewhere in the middle. For iPhone 3G, 3GS, as well as first-generation iPhones, this connector is located among the boundaries of the upper area of ​​the smartphone.
  • A large number of these gadgets are bundled with a special tool for extracting a SIM card. This is a small paper clip with a thin ending. In the absence of such a tool, you can use an ordinary clerical paper, straightening one of its ends in advance.
  • After that, you need to insert the thin end into the hole of the slot and press a little, as a result of which the tray with the SIM card will “fly out” out. Then the subscriber needs to very carefully pull out the tray with the card from the mobile device.
  • The tray has a special recess for the card, where you need to insert it. To place the SIM card correctly, pay attention to how the previous SIM card was installed there. The gold contacts must point straight down.
  • The tray only fits one way, so you don’t have to worry about doing something wrong. You need to push the tray all the way in order to fix it in the iPhone. After that, you should check the side area of ​​the smartphone to once again make sure that the tray is correctly positioned.
  • After the steps taken, the iPhone 5s, as well as its other versions, will connect to the network automatically. Sometimes subscribers are asked to activate it on their own, but this is not difficult, so do not be alarmed when you see such an offer on your iPhone.
READ  How to transfer video over Bluetooth from iPhone

If you follow the described actions very carefully, clearly and consistently, the described operation will end in success, and you will immediately be able to use your brand new smartphone.

How to remove a SIM card from an iPhone 4

The safest way to remove the SIM card from the iPhone 4 without using the original key is to use a paper clip. Surely many have the most common paper clip underneath. Unfold it or straighten the long end as shown in the image and insert it into the SIM tray in the iPhone 4.

How to remove a SIM card from an iPhone?

Last time, we looked in detail at how to clear memory on iPhone using iTunes and without it, wrote a small instruction, which you can read here. Nowadays, it is difficult to imagine a phone without a SIM card. All iPhones and most iPads are designed for communication between users, friends, colleagues and people close to us. Communication is possible both via the Internet and through the network of a mobile operator using a SIM card. How to insert a SIM card into an iPhone 7?

A SIM card is an intermediary that provides the operator of communication services with information about your device, its access to voice communication and data transmission. Full operation of the device is impossible without a SIM card. So, in this article we will deal with a seemingly simple question of how to insert a SIM card into the iPhone 6 and most other iPhone models. First, let’s consider what type of SIM is required for the normal operation of the device.

Apple iPhone 7. How to Insert SIM Card

According to the official information from the Apple website, the following types of SIM cards are used in the iPhone, which are shown in the image. Therefore, be careful and check the consultant of the operator of communication services or insert the SIM directly in the communication salon, in the presence of an experienced assistant.

How to get a SIM card from 5 iPhone if there is no original paper clip?

Probably every house has toothpicks. Many people use toothpicks after eating, but not everyone thought that they can be used as one of the improvised means to remove the SIM card from the iPhone.

ATTENTION! WE ARE NOT RESPONSIBLE FOR ALL ACTIONS THAT YOU TAKE WITH YOUR SMARTPHONE TO REMOVE THE SIM CARD.

Typically, a standard toothpick will not fit into the hole in the iPhone SIM tray. To get the SIM out of the iPhone using a toothpick, you need to sharpen its edges a little (do it already). Try to trim just a little from both edges. If you make it too thin, then the toothpick will break off when the SIM card is removed, be careful.

How to remove a SIM card from an iPhone 5s

All we need is to find out where the SIM card tray is located on the smartphone itself and the tool to extract the SIM card from the gadget.

The main difficulty that may arise on your way to remove the SIM card is the availability of a tool, but this is not a problem. We will manage with improvised means.

To begin with, if you still have a paper clip that is included with the device, we advise you to use it. Remove the case from your smartphone and locate the SIM card tray. As a rule, its distinctive feature is the presence of a hole in the case on the side of the device. Insert an original Apple paperclip into the hole and press down firmly to release the SIM card tray out of the slots.

After pulling out the tray with the SIM card from the device, the inscription SIM card is not active appears on the smartphone. We advise you to turn off your smartphone before inserting or removing a SIM card.

Where are the SIM slots on other versions of the iPhone?

Pretty much every iPhone comes with a SIM tray. The only exception was the CDMA variant of the iPhone 4. Therefore, if you have an iPhone 4S or newer, then you will definitely find a SIM card compartment on your smartphone. Let’s describe in words where the slot is located and on which models:

iPhone 3G3GS: on top between the headphone jack;

iPhone 4-4S and later: On the right side of the case, which is opposite to where the volume buttons are located.

Whenever you replace the SIM card, make sure you insert it into the tray in the correct orientation, so be extremely careful. Our instructions will also help those users who ask the question of “How to insert a SIM card into the iPhone 7”.

The ultimate screen protector for iPhone. Full 3D tempered glass on iPhone 7. Manufacturer, Benks company.

How to get a SIM card from an iPhone?

Copying contacts from iPhone to iPhone, setting a beautiful wallpaper, or recording a video yourself using just one phone from Apple is not difficult at all. Another thing is from time to time arising technical problems associated with the maintenance of the device. One of them is installing and removing a SIM card; how to properly remove a SIM card from an iPhone or iPad. let’s try to figure it out.

Removing a card from the slot is as easy as inserting a SIM card into an iPhone; before starting manipulations, the user needs to prepare:

  • Apple branded paperclip. it is certainly present in the box with the iPhone and, most likely, was used to install the SIM; if there is no such paper clip, an unbent paper clip, a sewing needle, an awl, a toothpick or any other elongated object of a suitable diameter.

Important: it is not recommended to use tools with sharp ends (needles, awls, etc.); if you still have to, you should use them very carefully, without making unnecessary efforts. otherwise, there is a high probability of damaging the working elements of the iPhone.

With everything you need in your hands, the owner will be able to remove the SIM card from the phone as easily as unlocking the Apple ID. User actions:

  • Find a SIM card slot with a distinctive hole on one of the ends of your iPhone. It is present on the device in any case. you just need to turn it in your hands and take a closer look at the case.
  • Carefully, without making any effort, insert the sting of a paper clip into the groove of the SIM card slot. you can do this by holding the iPhone both vertically and horizontally.
  • Press lightly with a paper clip inward. so that the slot opens. At this stage, no difficulties should arise; if, despite the efforts of the owner, nothing happens, you should immediately contact the service center. the wizard will deal with the problem as quickly as with a request to reset all settings on the iPhone.
  • Picking up the slot with your fingers (you can use tweezers or small pliers), open it. until the “substrate” for the SIM card completely comes out of the case.
  • Done! The user has successfully retrieved the slot. Now all that remains is to remove the SIM card. it’s no more difficult to do than to set up Touch ID correctly.

Advice: if the SIM gets stuck in the slot during extraction, you should carefully correct its position using a thin needle or wire. At the extraction stage, it makes sense to apply a little more force. this will not harm either the slot or the SIM card itself.

Usually, the SIM can be detached from the “substrate” by ordinary shaking out; if it does not come out, you should try to press on the back side with your finger (it will not damage the chip) or “glue” the non-working side of the SIM card with tape and pull it towards you. That’s all. by safely removing the SIM card from the iPhone, the user can replace it with another one or reinsert it into place.

READ  How to install vpn on iPhone

How to change SIM card in iPhone

Replacement in any of the iPhone phones is carried out in exactly the same way as installing a new one:

  • Remove the SIM card slot with a key, paper clip or needle;
  • Get out the old SIM.
  • Insert a new one, taking into account the shape of the sled and serifs.
  • Join the network.

Summing up

To insert a SIM card into an iPhone, you must first turn off the device using the physical button on the top or right end. Next. determine which SIM format is used in the device. mini, micro or nano. To change or install a SIM card, you need to remove the slot by pressing a paper clip into a special recess, remove the tray, put the SIM card in it, following the guides, and put it back inside the iPhone.

Thank the author, share the article on social networks.

The first thing we do after buying any phone is to insert a SIM card into it. Detailed instructions on how to insert a SIM card into an iPhone will be given in this article. We will also give additional information regarding its different models, including.

Turn on the smartphone

Then immediately hold down the power button to turn on the device. Although there is no need to turn off your iPhone for the procedure, it will be more convenient to do this with the device turned on. Usually the network is detected automatically, only in rare cases it is necessary to additionally activate the SIM card.

Interestingly, in the iPhone XS Max model, released specifically for the Chinese market, the slot is designed for 2 nano SIM cards at once.

Determining the SIM card format

The next thing the owner of the iPhone should do is to determine the desired SIM card format. To do this, you need to carefully consider the existing SIM card and check the accepted terminology:

  • if the SIM card has not yet been broken out of the holder, it is simply called SIM. this format is not used in modern iPhones and smartphones based on Android OS (number 1);
  • SIM-cards of the usual size (15 × 25 mm) are called mini-SIMs and are installed in third-generation devices that are clearly not among the most expensive phones in the world (number 2);
  • Smaller SIM cards (12 × 15 millimeters) are micro-SIMs used in fourth-generation iPhones (number 3);
  • SIM cards that are 12.3 x 8.9 mm in size are called nano-SIM and are used in newer iPhone models from the 5th generation (number 4).

Quite often, mini-SIMs are referred to simply as SIMs; while the classification of the remaining sim cards remains unchanged.

Important: A user who purchases a new SIM card for iPhone does not have to worry about compatibility. The original mini-SIM does not even need to be cut to fit your device. it is enough to carefully break off the desired size, not forgetting to save the frame just in case. it can be useful when switching to another device.

If the SIM card is old, do not cut it manually. there is a great risk of damaging the chip. It would be much wiser to take the SIM card to any service center or, if funds allow, purchase a device for adjusting the format at home.

Tip: do not break the SIM cards out of the holders until the slot is removed from the iPhone. there is always a possibility of making a mistake with the size. If you need to “grow” a SIM-card from a smaller size to a larger one, it is enough to insert it back into a suitable frame. the one from which it was taken out, or any that was at hand.

About SIM-cards

If the instructions on how to insert a SIM card into the iPhone 4 and, for example, the iPhone XR are no different, then you need to pay attention to the size of the card itself. What and where fits:

  • iPhone, iPhone 3G, and 3GS. Standard.
  • iPhone 4 and 4S. micro.
  • iPhone 5, iPhone 6 and all subsequent models. nano.

For several years, buying yourself a new number, you get a universal chip. the plastic around it is perforated in three belts, which allows you to “break out” a card of the required size: standard, micro or nano.

If the SIM card was purchased before the appearance of the second and third perforation belts, you need to contact the communication salon of your operator. it will be replaced with a modern one, keeping the number and free of charge.

How to correctly insert sim cards into smartphones from other manufacturers, read our other articles:

Possible problems with reading SIM and ways to solve them

Not always, even after successfully opening the device, the SIM card works correctly. On rare occasions, users may run into problems. To solve them, first of all, it is necessary to determine the reason.

In some cases, in order to activate the SIM card, you will have to connect to the Internet via a wireless connection (Wi-Fi). If this is not possible, you can also connect your phone to i-Tunes using the supplied cable. The program independently activates the card.

If everything worked out, the screen will display the name of the cellular network and the signal strength. If even after that, the screen shows that “Network not found”, then there are technical problems, or the SIM card was inserted incorrectly.

How to open the SIM card tray on iPhone

Users of smartphones and ordinary push-button phones are used to the fact that the SIM card is located under the battery, but even the design is different in the iPhone. The SIM card is inserted here into the slot in the middle of one of the edges.

The main priority of the Apple manufacturer is the protection of the device and user data. The design of the smartphone protects it from any attempts to maliciously steal user data and violate the integrity of the device.

It is this, different from other smartphones, method of fixing the SIM card that protects it from unwanted penetration, and only the owner can do this. It also minimizes the likelihood of losing a SIM card even if the phone falls or receives mechanical damage.

For iPhone 3G and 3Gsm only, the card slot is located at the top of the phone. At the same time, the iPhone 4 CDMA does not have a slot for installing a SIM card at all.

It is important to use only the SIM card tray that came with the phone, as this part differs from model to model, and trying to use the tray from five to seven may damage the device.

Interestingly, the new iPhone XS is planned to use eSim. a new type, which is a small chip (smaller nano-SIM) that is embedded in the device. It will relieve users of the need to open the slot, and will also allow you to use a different number without replacing the SIM card. The main catch is that the function is supported by the cellular operator.

Summary and comments

Protecting your device and user data is a top priority for Apple. The design features described above make it difficult for malicious access to the components of the phone. This technology gives developers hope that the owner will be responsible for installing / removing a SIM card from a device.

With such a locking mechanism, the SIM card does not fall out of the gadget and is not lost, even if the phone falls or receives other mechanical damage. In the case of iPhones, this arrangement of the tray was a hallmark of the company. Nobody has done this before.

SIM card installation process

Now, having decided on the format of the SIM-card for the iPhone, you can proceed to the main thing. try to insert it into the slot. It’s not as difficult as it might seem. much easier than putting a song on the iPhone ring. The user needs:

  • Find on the right end of the device (in new models. just below the on / off button) a small hole, the diameter of which fits a regular paper clip.
  • Take the special paper clip that came with the device. or, as just mentioned, a clerical one, plunge the sharp end into this hole and push without undue effort.
  • Wait for a characteristic quiet click, followed by detachment from the end of the front slot cover, and carefully remove the SIM holder.
  • Once again, check the required size of the SIM-card, break it out of the frame and immerse it in the slot. it will lie on the guides by itself.
  • Gently, again until a small click, insert the slot back into the iPhone. Now you can turn on the phone by pressing the corresponding button and start working as usual.

Fine! The SIM is installed in the device and after a few seconds it must be authorized by the operator. Having successfully completed the task, the user should not be satisfied with what has already been achieved. it is much better to expand their knowledge even more by learning what iCloud is for on the iPhone and how to use this multifunctional service correctly.

READ  How to listen to music through iPhone 7

Installing a SIM card

After removing the tray from its slot, place it on a flat, horizontal surface for easy installation. Please note that in iPhones, the SIM card slot can be completely removed from the device, which means that when inserting it back, you need to be careful so that the sled does not fall out or get lost.

Each SIM-card has notches on one of the corners, along which you need to navigate during installation. The recess in the slot will prevent the card from being inserted incorrectly. The contacts (chip) must face down. You can return the tray to its original place in only one position, gently push it inward until it stops.

Features of the used SIM card format

Starting with model “5”, iPhones are inserted into a Nano-SIM SIM card. the smallest available from telecom operators. The basic size SIM card is compatible with Apple smartphones of the first two generations. iPhone 3G and 4s were equipped with Micro-SIM slots.

  • length: 12.3 mm;
  • width: 8.8 mm;
  • thickness 0.67 mm.

It is possible to adapt the standard subscriber module to the Micro-SIM format by cutting off a part of the plastic case. An ordinary SIM card cannot be inserted into new iPhones, even if you cut out the plastic part as much as possible. in the Nano-SIM the chip itself has smaller dimensions. Therefore, in some cases, subscribers are forced to change SIM-cards in order to start using Apple products. In communication salons, it is changed on the day of treatment; the subscriber number remains the same.

How to put a SIM card in an iPhone

To get the sled on which the card is installed, use the special opening key located in a thick envelope.

Determining the SIM card format

The next thing the owner of the iPhone should do is to determine the desired SIM card format. To do this, you need to carefully consider the existing SIM card and check the accepted terminology:

  • if the SIM card has not yet been broken out of the holder, it is simply called SIM. this format is not used in modern iPhones and smartphones based on Android OS (number 1);
  • SIM-cards of the usual size (15 × 25 mm) are called mini-SIMs and are installed in third-generation devices that are clearly not among the most expensive phones in the world (number 2);
  • Smaller SIM cards (12 × 15 millimeters) are micro-SIMs used in fourth-generation iPhones (number 3);
  • SIM cards that are 12.3 x 8.9 mm in size are called nano-SIM and are used in newer iPhone models from the 5th generation (number 4).

Quite often, mini-SIMs are referred to simply as SIMs; while the classification of the remaining sim cards remains unchanged.

Important: A user who purchases a new SIM card for iPhone does not have to worry about compatibility. The original mini-SIM does not even need to be cut to fit your device. it is enough to carefully break off the desired size, not forgetting to save the frame just in case. it can be useful when switching to another device.

If the SIM card is old, do not cut it manually. there is a great risk of damaging the chip. It would be much wiser to take the SIM card to any service center or, if funds allow, purchase a device for adjusting the format at home.

Tip: do not break the SIM cards out of the holders until the slot is removed from the iPhone. there is always a possibility of making a mistake with the size. If you need to “grow” a SIM-card from a smaller size to a larger one, it is enough to insert it back into a suitable frame. the one from which it was taken out, or any that was at hand.

How to change SIM card in iPhone

Replacement in any of the iPhone phones is carried out in exactly the same way as installing a new one:

  • Remove the SIM card slot with a key, paper clip or needle;
  • Get out the old SIM.
  • Insert a new one, taking into account the shape of the sled and serifs.
  • Join the network.

What to do if a paper clip was not included to open the tray

A common problem for Yabloko. Usually the factory key is lost during operation. Most relevant for those who purchase a used incomplete iPhone: the key is missing.

In this case, you need to use a handicraft analogue of a standard tool. These can be:

  • thin needle;
  • paper clip.

Before use, a paper clip must be unbent and when installing the module, work with a sharp end. In this case, the paper clip should enter the diameter of the tray larva. It’s the same with the needle. At the same time, an artisanal tool should not be brittle, because a metal fragment stuck in the hole of the tray can entail an expensive appeal to a specialized service.

There is no need to abuse such substitutes. their use over time leads to breakage of the tray opening.

Selection and installation of a SIM card

Before you can set up iPhone 7, you need to properly install the SIM card. Smartphones use nano “SIM”, which differs from the usual smaller size. This is due to the fact that there is little space inside the device and the manufacturer saves it on different modules. The SIM card slot was no exception.

To install a nano SIM card in an iPhone, you need to click on the hole near the tray using the special clip that comes with the gadget. You can also use a regular paper clip. After pressing, the tray will slide out slightly and should be pulled out completely. Next, you need to install the card in the tray with the front side up, push the tray back and fully push it into the slot. Then you must enter the PIN. If there is no firmware for a specific mobile operator, the phone will automatically detect the operator. If the device cannot detect the network, you need to go to “Settings” and select “Operator”.

How to properly set up the seventh iPhone

After buying a new iPhone 7, be sure to set it up. Without completing it, the user will not be able to use the phone’s capabilities. Many people are mistaken and think that only Apple service employees know how to properly set up an iPhone. But you can save on their services. After reading our instructions, everyone will independently activate and configure the device without any special skills.

Final configuration steps

After creating an account, those wishing to set up a new iPhone 7 have the opportunity to connect the cloud storage of information iCloud, which will store backups from devices with the iOs operating system, photos, contacts, applications.

Going to the “Diagnostics” section, a person must decide whether it is necessary for the mobile device system to send a report on the technical and functional state to the manufacturer on a daily basis. Consent to sending means that the office of the creators of the gadget will regularly receive information about the operation of the hardware and software components, as well as errors and failures in it.

When setting up your phone, you can choose the option of displaying data on the screen: “enlarged” or “standard”. The first option is for people with vision problems.

All these stages are optional, you can refuse to go through them, but they help to better optimize the customized smartphone and use its capabilities to the maximum.

Setting up your iPhone 7 starts with these simple steps:

  • turning on. means pressing and holding the power button for a few seconds until a greeting appears on the screen;
  • holding the Home button for 3-5 seconds, and then alternately selecting a language, country or region;
  • Internet connection. an active Wi-Fi network or mobile Internet is used.

Next, you will need to choose to enable or disable geolocation services. Activating them will allow you to track the location of the iPhone 7 (which is especially important if a gadget is lost or stolen), use maps and navigation applications, receive weather forecasts, etc. You can enable or disable geolocation services at any time. You need to go to Settings, select Privacy, and then Geolocation Services.

Location Services can be enabled / disabled completely or for individual phone applications. Disconnecting will allow the battery to last longer.

The next step is to set up Touch ID and set a password. Touch ID is a function that allows you to unlock your phone using your fingerprint. The password protects the gadget from being used by unauthorized people and protecting personal data. To change it, you need to select the “Password Options”.

Then you need to select the configuration method: “New Device”, “Recover from iCloud” or “Recover using iTunes”. In the second and third cases, you can restore data and accounts from the services that the person used on the previous smartphone. On average, the recovery process takes 30 to 60 minutes.

HSIDG.COM 2021