Laptops and Tablets • Recommendations and advice

iPhone

How to Factory Reset iPhone 4s

How to Factory Reset iPhone Without Apple ID Password in 2021

Modern mobile devices have many levels of protection, which often make the system inaccessible not only for intruders and outsiders, but also for the owners themselves. The reason is trivial, because both old and young people can forget the entered password, especially if they are often changed to enhance the security of the gadget, which can be fraught with similar consequences. And everything would be fine, but only the number of attempts to enter the coveted cipher is limited, so you should never rush to try all possible combinations so as not to block the device.

How to solve the problem through iTunes if you forgot your password

ITunes is considered to be one of the most multifunctional devices for Apple, which helps to quickly and easily restore a locked iPhone. But it is enough just to enter the wrong code several times in a row or use the biometric scanner incorrectly for the phone to go out completely. Therefore, in such situations, it always makes sense in a PC with iTunes installed on it.

factory, reset, iphone

At the same time, for the recovery itself through the application, the following step-by-step algorithm of actions is provided:

  • Connect the smartphone to the PC via the supplied cable.
  • Try to force restart the gadget by quickly pressing the plus and minus of the volume control (relevant for models “8”, “8 Plus” and older). If you use earlier versions, such as “6s”, then it makes sense to simultaneously hold down two keys at once. “Home” and “Power / Volume”. But the activation of an extinct iPhone in almost all devices is carried out in the same way, or to be more precise, by pressing and holding the side controller for a long time.
  • If the iPhone has been restored to its senses, then you should select the restore option and synchronize, along the way agreeing to save the previously made backup file copies in the device’s memory.

At the final stage, the phone is reconfigured, after which it will not hurt to write out the saved code and password in some notebook or diary, so that one not very fine day the user does not have to restore this data again.

What is an Apple ID password and why it is dangerous to forget it

One of these security codes is the Apple ID password, found exclusively in Apple products from Cupertino. And unlike many other locking tools, the use of this key is mandatory, and from the very beginning of the device’s operation, that is, from the moment of its first setup.

In the first case, the user is prompted to enter a name written in Latin with the obligatory ending “@ iCloud.com”, while the password requires a combination of numeric and alphabetic characters with the obligatory use of uppercase and uppercase letters.

It is noteworthy that to create your Apple account it is not at all necessary to purchase a new device, because you can register on the official website Appled.Apple.com, doing it completely free.

In this case, it is not at all necessary to tie up your bank card data, despite the fact that the system will request them. over, if you do not intend to use iTunes or any other paid Apple services, then it is better not to tie the card at all, since by agreeing to a 3-month free subscription to any application, its owner runs the risk of being automatically debited after the specified period.

It should be noted that it will not be possible to do without accounting, and not only at the initial stage of operation, but also in the future, since access to the AppStore and any other built-in service of the company without an Apple ID continues to be impossible.

But changing the secret code-password is quite real, and completely free of charge and as much as your heart desires. To do this, go to the “Account Management” menu and enter a new password with a mandatory duplicate confirmation, using for this purpose any synchronized device with the same ID.

How to Factory Reset iPhone 5, 5S, 6S, 4C, SE without Apple ID

Naturally, it is possible to change the account settings only if the information about the previous data has not been lost. In all other cases, you will have to reset the basic parameters of the smartphone or tablet to the factory settings, which is fraught with the complete loss of personal data. It is quite simple to insure yourself against such consequences, because you can always dump all information from Apple products to a PC or hard drive in time, using such a universal tool as iTunes.

As for the very algorithm of actions for resetting the settings, it is not difficult, assuming a transition to the settings menu, and then to the section “Password and Security”. For the reset itself, you will have to strain your brains and remember all the secret answers to questions, trusted phone numbers and mailboxes, as well as recovery keys that were specified by the user during registration.

It is also worth noting that you can implement your plan not only from this iPhone, but also from a device paired with it using the same Apple ID.

Things will be much more difficult if the user forgets all security questions at once, or loses access to synchronized devices operating from a shared account. Nevertheless, today even such problems are easily and quickly solved, albeit through the use of third-party software such as “Apple Support” and “Find iPhone”.

The first application is supported by Apple devices running iOS12 and later versions of the proprietary operating system. As for its use to reset user data, immediately after downloading the software from the AppStore to the gadget system, it is recommended to act in accordance with the following instructions:

  • First of all, you need to go to the “Get support” section, which can be seen at the bottom of the device display.
  • Next, from the entire list, select the tab “Apple ID” and “Forgot your password”.
  • The next step involves clicking on the option “Another password”.

After going through the specified chain, you should reset the code, following the instructions, which may differ slightly depending on the type and model of the device. The Find iPhone program is no less effective in solving this problem, moreover, it is suitable not only for the 12th version of the operating system, but also for its earlier versions (and therefore for older devices), starting with the 9th Factory reset works in this application according to the following principle:

  • Immediately after entering the software, you must make sure that the field is free of any characters. If this is not the case, then you will have to manually delete the entered data.
  • Then click on the command “Forgot your ID or password?” and all the necessary reset manipulations are performed.

If the input screen remains inaccessible, then there is always the opportunity to exit and re-check the state of the field to enter the verification code. And if this time it is empty, then you can safely bring the started business to its logical conclusion.

Password recovery methods

It is worth noting that an almost identical method for recovering user information is provided when using the iCloud cloud storage service. But that’s not all, because there are a lot of life hacks for changing the password. And it is definitely worth taking a closer look at the following ones:

  • Resetting the counter of incorrect password attempts.
  • Using iPhone recovery mode, relevant only if the ID is known.
  • Installing new firmware using a special DFU-mode, used when the previously performed manipulations were not effective enough.

It is noteworthy that all of these recovery tools are also based on iTunes, in most cases asking for an ID. But if the user cannot boast of such a privilege, and none of the methods works, then it is necessary to check all paired devices for logging into iCloud, and also exclude the presence of activated 2-factor authentication. Alternatively, you can try to fix the problem in the following ways:

  • Click on the “Forgot ID or Password” option, after going to the account page.
  • Select the item “Reset password” and confirm it with the command “Continue”.
  • Decide on the method of resetting data by choosing an answer to security questions or sending a confirmation to an email address.

It is also worth recalling that when requesting a recovery key, you will have to pass verification in two stages, entering not only the user-specified identifier, but also the requested key. Next, a trusted gadget is selected, the changes are confirmed using the link sent to the specified address, a reset is performed, and a new password is specified. Voila! iPhone is restored and ready for further use without the slightest threat to user security.

READ  iPhone thinks headphones are connected

IPhone Settings

Perhaps the easiest and fastest way to reset is through the settings of the phone itself.

At the end of the window that opens, select the “Reset” button.

  • If you need to completely clear the phone of any information it contains, select the “Erase content and settings” option, and then confirm your intention to continue.
  • How to turn off Find My iPhone

  • Move the slider next to this function to the off state. To make the final changes, you will need to enter your Apple ID password. From now on, a full reset of the device will be available.
  • iTunes

    The main tool for pairing iPhone with computer is iTunes. Naturally, a complete reset of content and settings can be easily performed using this program, but only if the iPhone was previously synchronized with it.

    • Connect your phone to your computer using a USB cable and launch iTunes. When the smartphone is identified by the program, at the top of the window, click on its thumbnail.

    On the Overview tab on the right side of the window, there is a Restore iPhone button. Select her.

  • Confirm your intention to reset the device and wait until the end of the procedure.
  • How to Hard Reset iPhone

    Recovery Mode

    The following method of restoring a gadget via iTunes is suitable only if the gadget has already been paired with your computer and the program before. But in situations where recovery is required to be performed on someone else’s computer, for example, to remove the password from the phone, using the recovery mode is suitable.

    • Unplug your phone completely and then connect it to your computer using the original USB cable. Launch iTunes. Until the phone will be detected by the program, since it is in an inactive state. It is at this moment that you will need to enter it into recovery mode in one of the ways, the choice of which depends on the gadget model:
    • iPhone 6S and younger Simultaneously hold down two keys: “Home” and “Power”. Hold them until the phone screen turns on;
    • iPhone 7, iPhone 7 Plus. Since this device does not have a physical Home button, it will enter recovery mode in a slightly different way. To do this, hold down the “Power” and volume down keys. Keep holding until the smartphone turns on.
    • iPhone 8, 8 Plus and iPhone X. In the latest models of Apple devices, the principle of entering Recovery Mode has been quite changed. Now, to put your phone into recovery mode, press and release the volume up key once. Do the same with the volume down button. Hold down the power key and hold until the device turns on.
    • The following image will indicate a successful entry into Recovery Mode:
  • At the same instant, the phone will be detected by iTunes. In this case, in order to reset the settings on the gadget, you will need to select the “Restore” item. After that, the program will start downloading the latest available firmware for the phone, and then installing it.
  • Factory reset iPhone

    Hard resetting your device will erase all information previously contained on it, including settings and downloaded content. This will restore it to the state it was in after purchase. You can perform a reset in different ways, each of which will be discussed in detail below.

    Note that you can only zero your device using the first three methods if the Find iPhone tool is disabled on the device. That is why, before we move on to the analysis of these methods, we will consider how the protective function is deactivated.

    How to Hard reset iPhone 4S through recovery mode

    iCloud

    And finally, a way to erase content and settings remotely. Unlike the previous three, this method can only be used if the Find iPhone feature is enabled on it. In addition, before proceeding with the procedure, be sure to make sure that the phone has access to the network.

      Run any web browser on your computer and go to the iCloud service website. Log in using your Apple ID details. email and password.

    Once signed in, open the Find My iPhone app.

    For security purposes, the system will ask you to re-enter your Apple ID password.

    The map will be displayed on the screen. After a moment, a mark will appear on it with the current location of your iPhone, Click on it to show an additional menu.

    When a window appears in the upper right corner, select “Erase iPhone”.

  • To reset the phone, select the “Erase” button, and then wait for the process to complete.
  • Any of the above methods will completely delete all data on the phone, returning it to factory settings. If you have any difficulties when erasing information on an Apple gadget, ask your questions in the comments to the article.

    Removing applications and ancillary data

    It may well be that an application is taking up too much memory. Or you want to uninstall a program that you haven’t used for a long time. One way or another, this can be done in several ways.

    Reset network settings

    This feature allows you to clear connections and passwords to Wi-Fi hotspots. Also, resetting network settings will delete all connected VPN servers. Select the appropriate item and enter the password for accessing the device to perform cleaning.

    Things to do before completely cleaning your iPhone

    So, if you decide to do a factory reset (and it doesn’t matter if you want to completely format the device or clear the data of some programs), you first need to make a backup. This copy will keep all your data and settings, as well as files and programs. In general, it is recommended to make backups periodically. If you want to start from scratch, just skip this step.

    HOW to Hard Reset iPhone 4/4S [Works in 2021]

    Officially, Apple devices can back up using two programs: iCloud and iTunes. In the first case, your data will be placed in the cloud on the company’s server. So you can only access them over the internet. The second option allows you to save a backup on your computer. Choose the one that suits you best.

    Removing from the desktop

    To uninstall the program directly from the desktop, do the following:

    • Go to your desktop.
    • Hold your finger on the touchscreen for 2 seconds.
    • Click on the cross that appears next to the program shortcut and confirm the deletion.

    Please note that you cannot remove standard programs.

    Resetting the keyboard dictionary

    The keyboard in Apple devices can memorize frequently used words. Subsequently, when typing, the program will suggest you the desired word if you start typing it. Reset keyboard dictionary allows you to clear your word memorization data.

    Reset all settings

    To perform the hard reset procedure, go to “Settings” and find the item “Reset” in the subsection “General”.

    You will see a window for choosing a reset option. In this case, we are interested in the first two: “Reset all settings” and “Erase settings and content”.

    In the first case, the device settings will be reset to factory settings. In this case, all your data and files will NOT be deleted. This option is suitable for those who have problems with finding a network, cellular settings, syncing applications, etc. If you want to completely format the device, select the second option: “Erase settings and content.” After that, you will need to enter the password for locking the gadget.

    If your device is jailbroken, this formatting method will not work for you. You need to use iTunes.

    A reset warning will appear in front of you. Tap the “Erase iPhone” (or any other device) button twice.

    If your phone is synced with iCloud, you will need to enter the corresponding password from your AppleID.

    After entering the password, the formatting process will begin. The Apple icon and loading bar appear on the screen. It takes no more than 20 minutes.

    Please note that the phone must be at least 25% charged for a successful formatting process.

    Reset all settings via iTunes

    The exact same reset procedure can be done through iTunes. Connect the device to your computer and find it in the program interface. On the Overview tab, click the Repair Device button. Again, if you’ve synced your gadget to iCloud, you’ll need to enter a password. After that, the formatting process will start.

    Backing up to iTunes

    To back up your Apple device to your computer, do the following:

    • Launch iTunes and connect your device to your PC.
    • Enter the password for the device on the computer (if set).
    • Select your device in the program interface (it will appear in the main window).
    • In the window for working with the device, check the box next to the words “Encrypt backup”; set a password.
    • Click “Create a Copy”.

    To check your backup, go to the settings of the iTunes application and on the “Devices” tab you will see a list of copies with the corresponding dates.

    Using iTunes does not require a network connection. In addition, the amount of available memory is unlimited here. However, you will have to create backups yourself each time.

    iPhone 8 and all new models

    Starting with the iPhone 8, the creators of the mobile device have changed the emergency reset procedure. Now 3 physical keys are involved in this process. First you need to press the volume up button. Immediately after that, press the volume down key once. Then hold down the on / off button for a few seconds until the company logo appears.

    Reset in recovery mode

    A full reset via Recovery Mode uses both the phone buttons and the computer with iTunes. To perform zeroing using a PC, follow the presented algorithm:

    • Connect iPhone to computer via USB cable.
    • Launch iTunes and wait for syncing with your phone.
    • Reset using the buttons as described in our instructions above.
    • After that, iTunes on the computer will prompt you to restore or update the device. Click on the “Restore iPhone” button.
    • Now it remains to wait for the phone to return to factory settings.

    After completing the procedure, you will receive iOS in its original form. At startup, you need to select a language, region, authorize or register an Apple ID, and so on.

    READ  IPhone is hard to hear when the speaker is talking

    An alternative reset method is the iOS system menu. However, to use it, your device must start properly and not freeze for 10-15 minutes. Then you will have time to go into the settings and select the appropriate zeroing option. The advantage of this method is that the user himself chooses the reset area (full reset, reset content, network settings, geo settings, dictionary, etc.).

    What will be removed?

    Before you reset the device, read the list of materials and sections that will be deleted. The complete list is presented below:

    • contacts, calendar, notes;
    • installed applications;
    • music, videos, podcasts;
    • network settings, geolocation.

    It is recommended that you back up to your computer hard drive or iCloud before resetting. This way you will spend the least amount of time restoring all your personal data and settings. After that, you can proceed to the zeroing procedure.

    Depending on the iPhone model, you need to choose the appropriate factory reset method. We have identified 3 relevant options for different versions of the phone.

    iPhone 6s and earlier (including iPhone SE)

    Let’s start with older devices. This includes all generations of iPhone up to and including 6s and 6s Plus. On these versions of the device, Home (located under the screen) is a physical key, so it is used in the Hard Reset procedure. Press the Power and Home buttons at the same time for 15 seconds until the Apple logo appears.

    How to reset iPhone DO to factory settings using buttons

    If your mobile device from Apple constantly freezes or restarts, then a complete reset of the device can solve many software problems. In this article, we will talk about how to reset iPhone DO to factory settings using the buttons.

    You can reset iPhone via Recovery Mode using computer and iTunes. We will also consider the option without the use of additional tools. only the physical keys of the phone.

    iPhone 7 and 7 Plus

    In the seventh version of the iPhone, the physical Home button became touch-sensitive, so they decided to change the emergency reset combination. If the phone freezes, the touch button stops responding to pressing. To reset, you need to hold down the volume down key and the power button at the same time.

    Now you can reset any iPhone model to factory settings using the buttons and the computer. Remember the procedure or add our instructions to your browser bookmarks. this way you will definitely not find yourself in an unpleasant situation with a frozen iPhone.

    We are waiting for your comments and questions under the guidance. Portal specialists read all messages and respond to each visitor!

    Why do a factory reset on iPhone

    Hard reset often helps with the following problems:

    How to Reset iPhone 4, 5, 6, 7

    If you have problems with your iPhone, then before contacting the service center, you should try to reset the settings yourself.

    Reset iPhone 7

    To reset the seventh iPhone, you need to simultaneously hold down the Power and Volume Down buttons. Hold them until the iPhone reboots and shows the bull’s-eye on the screen. When the Apple logo appears, release both keys.

    After that, you should see the initial settings screen. Now you need to set up your iPhone from scratch, as you did after purchase: unlock the device, select a language, country, WI-FI network, etc.

    18 responses to “How to reset iPhone 4, 5, 6, 7”

    Thank you very much, I wanted to carry it to the repair, but thanks to this article, everything returned to its place right at home. Thank you very much
    PS: on 5s everything happens much faster, about 5-7 seconds

    I am blocked what to do no access to mail

    Hello dear people! I have an iPhone 4s and jailbreak it (on ios6.1.3). Then I installed “Fake IOS 4.1.2” Tweak in the jail and the phone does not work. It turns on, the broken apple lights up (ios6 logo), so for 15 seconds and a recovery bar appears. As it reaches about 79%, it goes out, the logo is barely visible, and later the screen goes out even more. And all the mess in a new way. No laptop / PC. Cho to do?

    thank you i’m sooooo thankful thank you

    Please tell me if I forgot the password on the iPad from iCloud with a hard reset, what will happen ?! will require the same password

    I myself am not very good at recovering and forgotten passwords yet. But Apple’s website has a procedure for recovering Apple ID using a device. Try it: https://iforgot.Apple.com/ru/password/verify/Appleid#!section=password
    However, I don’t know if your iPad has a SIM card. There the number asks for.

    Hi I have an iPhone 4c Writes Iphone Disconnected repeat after 25 557 324 min What to do?

    I have a locked iPhone 5s, how do I reset it to factory settings? Answer please

    How exactly is it blocked? if blocked via iCloud, then either remember the password, or (if you don’t remember or the iCloud account is not yours) send an unlock request to Apple and attach a purchase receipt.
    Here we wrote about it: How to unlink iPhone from iCloud
    Last paragraph

    How to reset it to the standard settings if I do not remember the restrictions password?

    Hello. Need help. I entered the wrong password more than once. Now the phone is turned off and writes to connect to iTunes, but this is not possible. Clamping the buttons home and turning on did not give any results. Help me please. It is desirable that all files remain on the phone.

    After I clicked to update the iPhone 5s Up to 12 ios, it first started to hang, then it froze altogether. I rebooted and the screen just stopped responding buttons. work but the touch pad simply does not respond. can’t unblock. connected to iTunes. asks to unlock to continue. help, maybe there are a couple of tips. I tried to reboot through the clamping home and the power button.

    When you reset the settings, are the pictures deleted?

    Hello, I forgot the unlock password. Blocked it. There is no computer at the moment. How can I reset the settings?

    DFU mode

    DFU (device firmware update). this mode is used to update and / or install a new firmware when the device is turned on, but the operating system is not running.

    The initial step when switching to DFU will be to connect the device to a PC via USB, after which you need to:

    • Hold down the power and Home buttons at the same time.
    • Release the power key.
    • Hold the Home button until the iTunes smartphone is detected.

    On smartphones without a mechanical Home button (7 and up):

    • Press the power key.
    • After 3 seconds, press and hold the “Reduce sound” button.
    • Release the power button after 10 seconds.

    Standard tools

    The easiest way to reset the settings to factory settings is using the device menu.

    Select the item “Basic” and go to “Reset”. In the menu that opens, 6 sub-items will be displayed, of which only two are needed for the procedure:

    • “Reset all settings”. this item returns the smartphone to the initial settings with the preservation of all personal information. This method is suitable if you have problems with the software or to clean your smartphone from system junk;
    • “Erase content and settings”. activating this command launches a full formatting of the internal memory: deleting accounts, phonebook, confirmed wireless connections, photo and video recordings, music and other personal information, the settings will also be reset. This method is designed to transfer the device to third parties, for example, when selling.

    If there are problems with the software, the device freezes and refuses to turn on, you can resort to Hard reset (hard reset). The procedure can disrupt the operation of the software, adding new problems to the existing ones. Therefore, you need to use a hard reset only when absolutely necessary:

    • Lineup from iphone 4 to SE. by simultaneously pressing the combination of the Home key and the power button;
    • When carrying out the procedure on 7 models and later, where there is no physical button (XR, XS and XS Max). hold down the power key and decrease the volume at the same time.

    Connect via iTunes

    The device must be connected to a PC. It remains to launch iTunes, in which you need to find the item “This PC”, select the iPhone and click on “Create a copy now”.

    Step by step instructions on how to erase all data and settings from iPhone

    Let’s find out how to reset iPhone DO to factory settings. This procedure is vital if:

    • You are about to sell a gadget;
    • Want to format your memory and “set up your device like new”,
    • iOs works crookedly, there are a lot of glitches or caught a virus;
    • The smartphone has been stolen or lost;
    • You bought an iPhone from someone else.

    At the same time, everything is deleted: photos, videos, correspondence in instant messengers, any access and passwords, contacts, games, programs, etc.

    The instruction is universal and suitable for all models: 4, 4s, 5, 5c, 5s, 6, 6 Plus, 6s, 6s Plus, SE, 7, 7 Plus, 8, 8 Plus, X, XS, XS Max, XR, 11. 11 Pro, 11 Pro Max.

    • To start
    • Be sure to check IMEI
    • Make BackUp
    • ICloud cloud storage
    • Connect via iTunes
    • Quit all services
    • The ways
    • Standard tools
    • Erase remotely
    • iTunes
    • DFU mode
    • How to understand if you managed to enable DFU mode
    • Third Party Applications
    • Tenorshare 4uKe
    • ReiBooPro
    • FAQ
    • Conclusion
    • Video

    Third Party Applications

    If, in addition to the cancellation of all system data, there is a need to remove the login password, identification means (fingerprint), unlink accounts from applications, then you can resort to third-party developer tools that will allow you to do this.

    Erase remotely

    In case of loss of the device, it is possible to remotely delete confidential data using the “Find iPhone” function.

    A feature present in any iPhone from the fourth. It works without restrictions only with the original software. No direct interaction with the device itself is required.

    • Log in to iCloud.com. enter your Apple ID and passcode;
    • Go to the “Find iPhone” section and confirm the actions by re-entering the password;
    • Select the device from which the data will be deleted;
    • Click on the “Erase” button;
    • Confirm your intentions by filling in the access code in the appropriate box.
    READ  Videos won't transfer from iPhone

    When carrying out an operation, encrypted information is deleted even on a non-bearing device (turned off or discharged, with GPS turned off or in Airplane mode). As soon as the smartphone connects to the Internet, the Apple server will send the appropriate commands to format the data.

    ICloud cloud storage

    The Apple owner is allocated 5 GB of cloud storage free of charge. For a successful procedure, you need to provide a stable mobile Internet or Wi-Fi.

    • Open “Settings” and go to “iCloud”;
    • activate the “Backup” option;
    • select “Backup to iCloud”;
    • confirm the process by selecting “Create a backup”.

    ReiBooPro

    This program will help restore iOs smartphone that crashed during the process of making changes to the software, freezes during operation or gives a startup error.

    As in the previous case, you first need to connect your iphone to your PC:

    • Select the “Fix iOS” item in the utility menu.
    • Confirm changes on smartphone.
    • Select “Recovery” and click “OK”.

    We strongly do not recommend contacting if you want to throw off someone else’s password left over from the previous owner, this can have sad consequences for you.

    When the “wipe data” option is activated, the device software is formatted with all personal data. This happens after the tenth failed password attempt. The process takes time: after six incorrectly entered passwords, the iPhone will be locked for one minute, this number doubles with each subsequent input.

    When choosing your password, you can periodically reset the counter of incorrect attempts. Connect to PC and sync with iTunes. After completing the procedure, the number of typed incorrect passwords is reset.

    Flashing iOS and resetting the device will not solve the problem. installing original components will be the only solution.

    However, zeroing with a keyboard shortcut does not exist (unlike Android smartphones).

    Features of the

    What happens if you reset the settings of the smartphone? When you roll back to the factory level, all data from the phone is deleted. If you completely reset the iPhone and do not backup the files, then after the restart, the data will be destroyed. To select the appropriate option for deleting information, you must:

    • Scroll the menu to the “Reset” tab.

    After selecting a section, a small menu will appear. The owner of the smartphone will be offered options for choosing to reset the previously made settings to the factory level.

    The following types of Factory Restore are available:

    • resetting the keyboard dictionary;
    • reset network settings;
    • reset the “Home” setting.

    Additionally, the owner of the gadget can reset the location settings to the factory level. At the same time, you may receive geo-location warnings that it will be necessary to disable the “Find iPhone” function.

    You can reset the network settings if the gadget stops responding to available connections. Another reason for performing an operation through the settings may be the lack of communication or interruptions when working in Wi-Fi mode. Before performing a full rollback of the system to the factory level, you must reset the password.

    Saving to iCloud

    Through iCloud, saving occurs remotely. You can do everything through a smartphone. The application is system.

    • The menu that opens should be scrolled to the “iCloud” tab.
    • To access the online storage, you must enter your Apple ID, password and click on the “Login” button.
    • Immediately after logging in, a notification about the merging of contacts will appear. To save the information, click on the “Combine” item.

    Save mode will start. Depending on the speed of data transfer and their volume, it will be necessary to wait from 1 to 5 minutes.

    After that, a window will appear where the user’s choice will be presented to all applications and information sources, the data of which can be copied in automatic mode.

    Saving is activated by swiping to the right. Scrolling down the window, the “Storage and Copies” tab will appear.

    By clicking on this item, a new menu will open. It displays the total available and used amount of copied data.

    To create a full backup of the device in the cloud storage, you need to click on the “Create a copy” item.

    To quickly copy all the information, it is better to use a stable internet connection. Provides high speed data uploading Wi-Fi network.

    How to reconfigure to another user? All you need to do is sign out of your Apple ID and enter other login details. As a result, the gadget will have access to information and programs that were used by another person.

    Training

    It is up to the user to decide whether a backup copy of the data is needed. It is recommended to use special means of storing information when carrying out the procedure for rolling back the system to the factory level.

    To do this, you can choose one of the following methods:

    • Saving to iCloud.
    • Copy and Restore via iTunes.

    Actions are performed in a few clicks. With these methods of saving data, all information after a system rollback will be restored to the mobile device. At the same time, you do not need to upload files yourself and distribute them to sections.

    iOS and services working with this system allow all actions to be carried out automatically. A full backup of the information is made. When you reset the settings, all data is deleted and the operating system is reinstalled.

    When you activate the recovery mode, all programs and multimedia files are downloaded to the device again using the PC and USB cable. Additionally, iCloud cloud storage service can be used.

    Factory reset iPhone

    Owners of smartphones from Apple more than once faced problems when the device began to slow down or software glitches appeared. The surest way to fix such a problem would be to factory reset your iPhone. Apple developers have implemented several hard reset methods specifically to implement this function. All Hard Reset options will be described in detail below in the article.

    You may need to reset your iPhone DO to factory settings for several reasons:

    • clear the device from the accumulated data;
    • reset all settings to factory level;
    • remove corrupted files or software.

    The operation performed allows you to reboot the device and return it to all factory parameters that were at the time of release. The following versions of smartphones support system rollback:

    • 4-4s;
    • 5-5s;
    • 6-6s;
    • later models released after 2016.

    The iOS mobile OS allows you to perform a factory reset not only on iPhone, but also on iPad. The developers have implemented several ways through which users can perform an operation to reset the system parameters.

    Copy and Restore via iTunes

    What does it mean to restore iPhone to iTunes? This is the standard procedure for rolling back and updating the system, with the transfer of all files from the device to a personal computer.

    This step requires a PC, USB connection cable, and iTunes software. After synchronizing the gadget with the software, controls are available that allow you to configure the device from a computer.

    To activate the smartphone control system in the main window of the program, you need to:

    • Click on the thumbnail image of the phone.
    • To copy all available information on the gadget at the bottom of the screen, click on the “Create a copy now” button.

    Recovery via iTunes is as follows. To do this, you must have a copy saved through the program on a PC. Next, you need to click on the “Restore from a copy” button. Factory reset can erase all data on iPhone. Recovery will protect against information loss.

    ITunes will then automatically upload all saved data to your device. It is worth noting that the copy will replace the information previously posted on the smartphone.

    Summary and comments

    Apple has many options for restoring the functionality of its devices. The procedure is not much different on different iPhone models. Resetting to factory settings will help both when selling a phone to delete all confidential data, and simply to clean the smartphone from accumulated software junk. If you have any problems when trying to carry out a Hard Reset or have questions, ask them in the comments, and our specialists will try to give them the most detailed answer.

    Users can draw their own conclusions about which of the above methods suits them best. Each of the options discussed will help you reset your iPhone. You can also perform this action through a personal computer.

    Regardless of how you perform a factory reset, it is recommended that you back up your data. It will save information and quickly load it after resetting iPhone. The listed methods are suitable for all gadgets running iOS mobile OS from version 7 and above.

    Reset via iPhone

    You can reset everything to factory settings on iPhone through the system menu. How do I completely clean my device? For this you will need:

    • Open the “Basic” tab in a new window.
    • In the iPhone menu that appears, click on the “Reset” item.

    You can’t completely reset your iPhone. There are several ways to choose from to reset the factory settings.

    It is worth noting that to completely reset all settings and delete files on the iPhone, you will need to disable the password set in the system. Without this action, the system will not be able to perform a data reset operation.

    iPhone can be reset to factory settings via a keyboard shortcut. This method is called Hard Reset. A hard reset erases all data on the device. The operation will be useful if the gadget does not start or a system error appears.

    To do this, turn off your phone completely. Next, on the iPhone, you need to hold down the Home and Power keys together and hold them for up to 15 seconds.

    The iPhone branded logo will light up, and a download bar will appear below it. After releasing the buttons, you must wait until the files are uploaded. The iPhone will then start up with factory settings. When performing such an operation, it is necessary that the battery charge is at least 50%, otherwise the recovery process may be interrupted.

    HSIDG.COM 2021