Laptops and Tablets • Recommendations and advice

Laptops

How to Enter BIOS on MSI Laptop

Entering BIOS on MSI

The main keys for entering are the following: Del (aka Delete) and F2. These values ​​(mainly Del) are applicable to all-in-ones and notebooks of this brand, as well as to Motherboards with UEFI. Less often, F2 is relevant. The range of values ​​is small here, so there are NO non-standard keys or their combinations.

MSI motherboards can be built into second-hand laptops, for example, as is now practiced with HP laptops. In this case, the login process usually changes to F1.

You can also view the login key through the user manual downloaded from the MSI official website.

    Using the link above, you can get to the page with downloads of technical information and data from the official ISI resource. In the pop-up window, specify the model of your device. Manual selection here does not always work correctly, but if you have no problems with it, use this option.

On the product page switching to the “User Manual” tab.

Find your preferred language and click on the download icon opposite it.

Naturally, if the MSI motherboard is built into a laptop from a second manufacturer, you will need to look for documentation on the company’s website. The search principle is similar and differs slightly.

Enter BIOS on MSI

MSI manufactures a variety of computer products, including full-fledged desktop PCs, all-in-ones, notebooks and motherboards. Owners of a particular device may need to enter the BIOS to change any settings. At the same time, depending on the model of the motherboard, the key or their combination will be different, and therefore the well-known values ​​may NOT work.

Solving problems with entering BIOS / UEFI

There are often situations when it is not possible to enter the BIOS, just pressed the desired button. If there are no serious problems requiring hardware intervention, but you still cannot get into the BIOS, it is possible that the “Fast Boot” option was previously enabled in its settings. The main purpose of this option is to control the startup mode of the computer, allowing the user to manually speed up this process or make it standard.

To disable it, use a utility with the same name from MSI. In addition to the fast boot option switch, it has a function that automatically enters the BIOS the next time the PC is turned on.

    Go to the MSI website using the link above, enter your motherboard model in the search field and select the desired option from the drop-down list.

On the ACCESSORIES page, go to the Utilities tab and specify the version of your operating system.

Find “Fast Boot” from the list and click on the download icon.

  • Unpack the ZIP archive, install and run the program.
  • Disable the “Fast Boot” mode with the button in the form of a switch on “OFF”. Now you can restart the PC and enter the BIOS with the key indicated in the first part of the article.
  • An alternative option is to use the “GO2BIOS” button, in which the computer itself will go into BIOS during the next startup. It is not necessary to disable fast boot. In short, this option is suitable for single sign-on via PC restart.

    When the described instruction DOES NOT bring the desired result, most likely, the problem is the result of incorrect user actions or failures that occurred for one reason or another. The most effective option would be to reset the settings, of course, in ways that bypass the capabilities of the BIOS itself. Read them in another article.

    It will not be superfluous to get acquainted with the information on what can affect the loss of BIOS performance.

    Well, if you are faced with the fact that the download does NOT go beyond the motherboard logo, the following material may come in handy.

    Getting into BIOS / UEFI can be problematic for owners of wireless or partially non-working keyboards. In this case, there is a solution at the link below.

    This concludes the article, if you still have difficulties with entering the BIOS or UEFA, write in your problem in the comments, and we will try to help.

    HP Laptops

    To enter BIOS on HP notebooks, you usually need to press the F10 or Esc key. But on older models, you may need Del, F1, F11 or F8.

    Did not like? View queue. For Windows 8.1

    Change Computer Settings → Update and Recovery → Recovery → Special Boot Options → Restart Now → Diagnostics → Advanced Settings → UEFI Firmware Settings → Restart.

    Samsung Laptops

    In Samsung devices, most often you need to press F2, F8, F12 or Del to enter BIOS. If you access the F-row only through the Fn button, you will need the appropriate combination: FnF2, FnF8 or FnF12.

    Acer Laptops

    In Acer notebooks, the most commonly used keys are F1 and F2, as well as the CtrlAltEsc combination. Acer Aspire series may require CtrlF2. In the TravelMate and Extensa line, you usually need to press F2 or Del to enter BIOS. Older Acer notebooks may have CtrlAltDel and CtrlAltEsc combinations.

    Sony Laptops

    Vaio series models may have a dedicated ASSIST button. If you click on it while the laptop is booting, a menu will appear with the option to select Start BIOS Setup.

    Older laptops can use F1, F2, F3 and Del keys.

    READ  How to Update Google Chrome on Laptop

    Dell Laptops

    In the case of Dell laptops, the most common option for entering the BIOS is the F2 key. Slightly less common are F1, F10, Del, Esc and Insert.

    How to enter BIOS (UEFI) in Windows 10

    One of the most common questions regarding the latest OS versions from Microsoft, including Windows 10, is how to enter BIOS. At the same time, it is more often in the form of still UEFI (often characterized by the presence of a graphical settings interface), a new version of the motherboard software, which replaced the standard BIOS, and is intended for the same. setting up the operation of equipment, boot options and obtaining information about the system state.

    Due to the fact that Windows 10 (as well as 8) implements Fast Boot Mode (which is a hibernation option), when you turn on your computer or laptop, you may not see a prompt like Press Del (F2) to enter Setup, which allows you to enter BIOS by pressing the Del key (for PC) or F2 (for most laptops). Nevertheless, getting into the desired settings is easy.

    Entering UEFI Settings from Windows 10

    To use this method, Windows 10 must be installed in UEFI mode (as a rule, it is), and you must be able to either log into the OS itself, or at least get to the login screen with a password.

    In the first case, you just need to be named according to the notification icon and select “All parameters”. Then in the settings open “Update and Security” and go to the item “Recovery”.

    In recovery, click the Restart Now button under the “Special Boot Options” section. After the computer restarts, you will see a screen the same (or similar) because it is shown below.

    Select “Diagnostics”, then. “Advanced options”, in the additional options. “UEFI firmware options” and, finally, confirm your intention by clicking the “Restart”.

    After a reboot, you will be taken to the BIOS or, more precisely, UEFI (it’s just that out of habit, the settings of the motherboard are usually called BIOS, probably this will continue in the future).

    enter, bios, laptop

    In the event that you cannot log into Windows 10 for some reason, but you can get to the login screen, you can also go to the UEFI settings. To do this, on the login screen, press the “power” button, and then, while holding the Shift key, press the “Restart” item and you will be taken to the special boot options for the system. Further steps have already been described above.

    Entering BIOS when turning on the computer

    There is also a traditional, well-known method to enter the BIOS (it is also suitable for UEFI). press the Delete key (for most PCs) or F2 (for most laptops) immediately when the computer is turned on, even before the OS starts to boot. Typically, the boot screen below displays the following text: Press Key_Name to enter setup. If there is such an inscription, you can familiarize yourself with the documentation for the motherboard or laptop, there should be such information.

    For Windows 10, entering the BIOS in this way is complicated by the fact that the computer boots up really quickly, and it is not always possible to press this key (or even see a message about which one).

    To solve this problem, you can: disable the fastboot function. To do this, in Windows 10 Right-click on the “Start” button, select “Control Panel” from the menu, and in the Control Panel. Power.

    On the left, click on “Actions for the power buttons”, and on the next screen. “Change settings that are currently unavailable”.

    Below, in the “Shutdown Options” section, uncheck “Enable Fast Startup” and save the changes. After that, turn off or restart your computer and try to enter BIOS using the required key.

    Note: In some cases, when the monitor is connected to a discrete graphics card, you may not see the BIOS screen, as well as information about the keys to enter it. In this case, reconnecting it to the integrated graphics adapter can help (HDMI, DVI, VGA outputs on the motherboard itself).

    How do I enter BIOS? (All options)

    Many users who have laptops or computers in their hands, and maybe all together, may encounter problems entering the BIOS. They still collide, so you need to figure out how to enter the Boot Menu. The instructions will not be for one specific computer. I will try to describe as many models of laptops and computers as possible. If you don’t know what BIOS is, read an article about it here.

    Also, if you DO NOT understand this topic at all, I do not advise you to go there without certain knowledge, since this can lead to serious problems. Let’s finally get down to business.

    In order to enter the BIOS on a desktop computer, usually at startup, you need to press the DEL (Delete) key. In general, you should see the following inscription: Press DEL to run Setup. Or Press DEL to Enter Setup. And quickly press DEL.

    This entry option is found on motherboards in 90% of cases. It happens that at the entrance you need to press either F1 or F2. If you do not have time to press in time, you will have to repeat the procedure, restart your computer and try to press again. With systems installed on SSD drives, this is quite difficult to do. Who doesn’t know, read the article on SSD. In general, we talked to you about computers. Now let’s move on to laptops.

    From a laptop, entering the BIOS is almost no different from the above. The described instructions are for ordinary PCs, you just need to press other buttons. The only difficulty may be that the device boots up very quickly and you DO NOT have time to press the required button. On some models, you can press the Pause key to Pause the system boot. So, most often, to enter the BIOS from a laptop, the keys F2, F10, F12 are used. The most rare cases are keyboard shortcuts like CtrlEsc or Ctrl S, etc.

    READ  How To Change Keyboard Color On MSI Laptop

    To enter the UEFI BIOS, the same keys are clamped, nothing special.

    Now I will sign the BIOS entry for several laptop models.

    Acer laptops. you need to hold down the F1, Del or F2 keys

    Lenovo laptops. usually F12, if it doesn’t work, try F1 or F2

    Asus laptops. Esc key for most models. Models that start with x or k use the F8 key.

    Acer PC. CtrlAltEsc or F1 keys

    Toshiba laptops. F1 or Esc key, sometimes F12

    Lenovo Laptops (Older Models). CtrlAltIns or CtrlAltF3 or FnF1

    Sony Laptops. F1, F2, or F3 Keys

    HP Notebook PCs. F9 Keys or First Esc and then F9

    Samsung laptops. hold down the Esc key

    Asus Oregano. F8 Key

    Intel Oregano. Esc Key

    MSI Oregano. F11 Key

    Gigabyte Oregano. F12 Key

    Dell Laptops. Pinching the F12 Key.

    Older Dell Models. FnEsc or FnF1 Keys

    Select Dell Models. Press the Reset Button Twice

    Award BIOS. Del Key

    ARI. CtrlAltEsc or CtrlAltDel keys

    ALR. CtrlAltEsc or CtrlAltDel keys

    AMI (old versions). F2 or F1 keys

    AST. CtrlAltEsc Keys

    Compaq (old PCs). F1, F2, or F10, or Del key

    Compaq (select models) F10 key

    DTK. Immediately after switching on, press the Esc key

    Cybermax. Esc key

    EISA. The shortcut keys CtrlAltS or CtrlAltEsc

    Fujitsu (some models). F2 key

    Emachines (Select models). Tab or Del keys

    Older eMachines. F2 key

    Hewlett-Parkard (HP). F1, F2, Esc, F10, F12 Key This is for models like HP Pavilion, Vectra, TouchSmart, OmniBook, etc.

    Older IBM models. F2 key

    IBM ThinkPad (newer models). Hold F1 key

    IBM ThinkPad (older models). CtrlAltIns keys with cursor in upper right corner

    Mircon. Keys F1, F2, or Del

    Sharp. F2 key

    NEC. F2 keys or hold and hold the F1 key

    Shuttle. F2 or Del keys

    Microid Research MR BIOS. F1 Key

    Olivetti PC Pro. Numeric Keypad Shortcut: CtrlAltShiftDel

    Phoenix BIOS. Del. For older models: CtrlAltS, CtrlAltIns, CtrlS, CtrlAltEsc

    Packard Bell. F1, F1 or Del keys. For older models: Press the Del key

    Tandon.CtrlShiftEsc Keys

    Zenith. CtrlAltIns Keys

    Tiget. Esc or F1 keys

    Reverbook. Del Key

    As you can see, I have described quite a few options for entering the BIOS from various computers, laptops and motherboards, save this instruction so as not to forget how to enter the BIOS.

    https://computerinfo.ru/kak-vojti-v-BIOS-vse-varianty/https://computerinfo.ru/wp-content/uploads/2015/08/How-to- enter-BIOS.Jpghttps:// computerinfo.ru/wp-content/uploads/2015/08/How-to- enter-BIOS.Jpg2015-08-24T13: 09-2900:00EvilSin225WindowsBIOS,BIOS UEFI, how to enter BIOS, how to enter BIOS on a laptop Many users who have laptops or computers in their hands, or maybe all of them together, may encounter problems entering the BIOS. They still collide, so you need to figure out how to enter the Boot Menu. The instructions will not be for one specific computer. I will try to describe how. Evilsin225andrey Terekhov [email protected] Computer Technologies

    How to enter and configure the BIOS of MSI VR610X laptop to install WINDOWS 7 or 8 from a flash drive or disk

    Consider the process of configuring the BIOS of an MSI VR610X laptop if you need to install the Windows 7 or Windows 8 operating system from a USB device, that is, a flash drive, or from a disk.

    USB flash drive or disc Must be pre-installed in USB port or CD / DVD drive, respectively.

    We turn on the laptop. In the process of loading the system, press the “Del” key. It is located at the bottom right on the numeric keypad.

    Getting into the main BIOS menu. Go to the “Boot” tab. Select the second term of the vertical menu “Boot Device Priority”. See image below.

    Press the “Enter” button. Go to the next window.

    Here we see a list of devices. The laptop will search and load the operating system on devices in this particular order.

    If we are going to install an operating system from a USB flash drive, then we need to move the USB device to the first line of the list. If we install the operating system from a disk, then for the first period we need to move the CD / DVD drive.

    In the image below, the USB device and CD / DVD drive are marked with numbers 1 and 2 respectively.

    In order to move the device we need to the first term, go to the “1st Boot Device” term. Then press the “Enter” button.

    A new window will appear as in the image below. In this window, select the desired device. Press the “Enter” button again.

    We go to the main BIOS menu. Go to the “Exit” tab. We check that the first line “Exit Save Changes” is active. Press the “Enter” button. In the next window, check that the “OK” button is active. Press the “Enter” button. See image below.

    The computer will automatically restart. After reboot, a window will appear as in the image below. Can install Windows 7 or Windows 8.

    There is another way to select a device from which you can load (install) an operating system. This method is much faster than the previous one.

    There is also a USB stick or disc Must be pre-installed in a USB port or CD / DVD drive.

    We turn on the laptop. In the process of loading the system, press the F11 button.

    A window will appear. In this window, select the device from which we want to install the operating system. See the image below. A window is marked on it and our devices are marked with arrows.

    After selecting the device, press the “Enter” button. The computer will automatically start loading the operating system.

    Link to

    How to enter BIOS on MSI laptop. How to enter BIOS, how to install, remove and change BIOS password for MSI VR610X laptop.

    Let’s consider how you can set, change or remove the password for entering the BIOS on the MSI VR610X laptop.

    We turn on the laptop. During the boot process, press the “Del” key to get into the BIOS. The button is located at the bottom right on the numeric keypad.

    In the main BIOS menu, go to the “Security” tab. The first two lines indicate that no password has been set.

    READ  How to connect a microphone to a karaoke laptop

    We pass to the third term of the “Change Supervisor Password” menu. Press the “Enter” button. A small “Enter New Password” context window will appear. See image below.

    Here we enter our password. Press the “Enter” button. A similar small “Confirm New Password” context window will appear. Image below.

    In this window, enter our password again, confirm it. Press the “Enter” button again.

    In the next window, press the “Enter” button again.

    Now you can see that the inscription opposite the first line has changed from “Not Installed” to “Installed”. This indicates that the password is set.

    We go to the main BIOS menu. Go to the “Exit” tab. Press the “Enter” button twice to save the password changes we made.

    The laptop will automatically restart.

    During boot, press the “Del” button again to return to the BIOS.

    A window will appear as in the image below. In it, the computer asks for a password to get into the BIOS.

    We enter the password, enter the BIOS menu.

    Next, let’s look at how you can change or remove the password.

    In the main BIOS menu, go to the “Security” tab. We go down to the third menu item “Change Supervisor Password”. Press the “Enter” button. A new window will appear in which you must enter a new password. See image below.

    Enter a new password. Press the “Enter” button.

    If you want to remove the password, then instead of entering a new password from scratch, press the “Enter” button.

    A window will appear indicating that the password has been either changed or removed. Press the “Enter” button again.

    We go to the main BIOS menu. Go to the “Exit” tab again. Press the “Enter” button twice, thus saving the changes that we made again.

    To check the changes, you can try to enter the BIOS again by pressing the “Del” key. Now the laptop will either immediately enter the BIOS if you have removed the password, or will ask you to enter the changed password.

    How to enter BIOS on a laptop

    If you are an advanced laptop user, then sooner or later you will be faced with the question of how to enter the laptop BIOS. This question can arise in different situations. The most common situation with laptops that may require entering the BIOS is setting sleep and hibernation. In this article, we will tell Not only how to enter the laptop BIOS, but also consider the basics of working and setting up the BIOS.

    As you know, BIOS stands for basic input / output system or basic input and output system. In other words, BIOS is the lowest-level program that controls the computer. The BIOS is responsible for such fundamental computer functions as turning on the computer, testing computer components, and starting the operating system.

    When it becomes necessary to enter the laptop BIOS:

    • Enable or disable integrated laptop components. Certain computer components that are integrated into the laptop motherboard can be enabled and disabled through the BIOS.
    • Change the used video card. Many modern laptops have two graphics cards: integrated and integrated. In this case, in the BIOS, the user can select one of them.
    • Configuring laptop operating modes. BIOS can be configured to sleep and hibernate.
    • Setting the system time. System time can be set using BIOS. Most often, this need arises after resetting the BIOS settings.
    • Monitor the condition of the laptop. Through the BIOS, you can monitor the temperature of the components, as well as some other parameters of the laptop.
    • Reset BIOS settings. Go to BIOS, you can reset its settings to default. Usually this feature is used when the laptop does not work correctly.
    • Configuring the second parameters of the laptop. In addition to the settings described above, there are many others in the BIOS, the description of which can be very time consuming.

    So, how to enter BIOS on a laptop

    In order to enter the BIOS on a laptop, you need to reboot it and during the subsequent boot of the laptop, press a special key on the keyboard. This key must be pressed immediately after the laptop starts booting, as a rule, at this moment a message will appear on the laptop screen prompting which key to press.

    The message on the laptop screen should look something like “Press Del to enter Setup”. Usually this message is located at the bottom of the screen. After you see this message, you must immediately click on the required button. If you manage to do this quickly enough, you will enter the laptop BIOS, if you act too slowly, the laptop will start loading the operating system.

    After the loading of the operating system has begun, pressing the key is useless, you will no longer get into the BIOS. In this case, you need to wait until the operating system is finally loaded, restart the computer and try to enter the laptop BIOS again.

    But, unfortunately, a message with a hint of which key to press does not always appear on the laptop screen. In this case, you need to try different keys, which are usually used to invoke BIOS.

    In most cases, one of THESE keys is used to enter the BIOS on a laptop:

    • DELETE
    • F1
    • F2
    • F3
    • F10
    • F11
    • F12
    • Esc

    In very rare cases, in order to enter the BIOS on a laptop, you need to press a key combination. These can be such combinations as:

    • Ctrlaltdel
    • Fnf1
    • Ctrlaltesc
    • Ctrlalt
    • Ctrlaltins
    • Ctrlalts
    • Ctrlins
    • Ctrlaltenter

    After you have entered the BIOS and changed the settings you want, you will need to exit. In order to exit the BIOS, you can use the Esc key. In BIOS, this key is responsible for returning to the previous menu or exiting the BIOS. Just press the key several times and you will exit the BIOS.

    HSIDG.COM 2021