How to enter BIOS on a lenovo laptop

How to enter the BIOS in a Lenovo laptop from the Windows 8.1 operating system

This login method is not as common as the previous ones, but, nevertheless, both ordinary users and programmers use it successfully. It is suggested by experts for those cases when the laptop keyboard or the BIOS entry keys are faulty. Let’s take a look at how to enter BIOS in this case.

enter, bios, lenovo, laptop

Entering the program requires the following actions:

  • Boot laptop with Windows 8.1 already installed.
  • Select with the mouse pointer “Options” in the lower right corner of Win 8.1.
  • Go to “Change user settings” and select “Update and recovery”.
  • Select with the mouse pointer “Recovery”. “Special boot options”.
  • Then you need to reboot the system by selecting “Reboot now”.
  • The Diagnostics tab appears on the monitor. Here you need to select the function “UEFI Firmware Settings”.
  • Restart the laptop again.

After completing a number of the listed steps, you will be taken to the BIOS. Please be aware that this login is only available for Lenovo laptops with Windows 8.1.

Summing up

To enter the BIOS on a Lenovo laptop, you need to use the Fn F2 key combination when turning on (less often. F1 or just Delete). Other options are to press the NOVO button, exit to Firmware Options, or hold down the Shift key while restarting. Finally, the owner can remove the power battery from the motherboard and then reinstall it in place. of course, it is better to turn off the laptop before this.

Much less often, in order to enter the BIOS, you have to use another Fn F1 combination or just press the Delete (Del) key.

In general, the procedure for user actions is reduced to two steps:

  • Open the “Start” menu and, by clicking on the virtual power button, select one of the options. shutdown or restart.
  • Turning your Lenovo laptop back on or waiting for it to start up after restarting and using one of the above keyboard shortcuts to enter BIOS is as easy as understanding the benefits of UEFI Boot.

If everything is done correctly, the user will see the BIOS menu in front of him. Now he can configure the BIOS, set the operating system boot sequence and perform other required manipulations. if necessary, after entering the password.

Tip: if your Lenovo laptop starts up too quickly or you can’t enter BIOS after rebooting, it makes sense to turn it off using the physical button by pressing and holding it for a few seconds.

Now, having given the Lenovo laptop a little “rest”, you should start it again. and do not forget to use one of the above combinations in time to enter the BIOS.

How to enter BIOS in Lenovo laptops

The BIOS is a very important computer program written on the chip on the motherboard. It allows the user to change the settings of the software and system software, making them low-level, provides assistance in repairs, and acts as a regulator in the operation of the motherboard. The first thing the wizard does when a computer or laptop breaks down is to enter the BIOS. In 80% of a hundred, it is from there that he receives information about the causes of a system malfunction.

Firmware parameters

To enter BIOS on Lenovo laptops running “Eights” or “Tens”, you can use the built-in Windows option:

  • Open the “Start” menu and click on the gear image in the leftmost column.
  • In the “Windows Settings” window that opens, enter the “Update and Security” section.
  • Switch to the “Recovery” tab.
  • In the section “Special boot options” click on the “Restart now” button. It is important to remember: the process will start immediately and without additional prompts, and therefore, before clicking, you must close open documents, save the changes made to the system and take other precautions.
  • In the “Select action” menu, click on the “Troubleshooting” button.
  • Next. go sequentially to the subsections “Additional parameters”.
  • That’s all. it remains to click on the “Restart” button and wait until the BIOS menu appears on the Lenovo laptop screen.

Important: although, in theory, the specified algorithm should run exactly UEFI, on Lenovo laptops, it is BIOS that is set by default for the initial boot. In addition, even if the owner is in the “extended interface”, he will be able to perform all his tasks in it, bypassing the basic I / O system.

Entering BIOS on Lenovo Laptop: Method 2

Entering the BIOS on a Lenovo laptop is carried out in several ways. unfortunately, there is no single solution for how to get into the BIOS for everyone, but the ways to start it are quite simple. So, let’s move on to the first method.

The most popular solution is to use the keyboard. pressing several buttons at the same time on the laptop immediately after starting it up. Turn off your laptop (this method will not work with enabled), then press the power button and immediately one of the options:

  • F2 button or Del button;
  • Combination FnF2;
  • F1 key

If the BIOS was launched incorrectly, the computer will boot the OS normally. In this case, you will have to turn it off again and call the BIOS again, but using the new boot method. In order not to play the “guessing game” and start the BIOS faster, you can also look at the instructions for the Lenovo laptop.

It also happens that the laptop starts up too quickly, and the user does not have time to press the required combination. To avoid this, turn off the laptop by holding down the power key for 10-15 seconds. Then hold down the desired combination to enter the BIOS, and then press the power button and release, while continuing to hold down the keys to enter the BIOS until the desired screen with parameters appears in front of you.

Common ways to sign in on a Lenovo laptop

The most common and well-known way to enter the BIOS is to press the Delete key on the keyboard. However, some computer and laptop manufacturers, including Lenovo, have defined other login methods for their systems.

When choosing a Lenovo manufacturer when purchasing, you need to remember that the computer equipment of this company is produced, as a rule, with an already installed operating system. If you want to reinstall the software on your laptop, you may face a problem: almost all modern models ignore the operating system you want, trying to return the computer to the original one. For this, you will need the ability to enter the BIOS yourself to get around this problem.

Depending on the Lenovo model, you can enter the BIOS in several ways:

How to enter the BIOS on most Lenovo ThinkPad laptops. The easy way!

  • press and hold the F1 or F2 keys;
  • press the DELETE button;
  • press the Novo Button.

Almost all modern Lenovo laptops have a Novo Button on their panel or side edge. Finding it is not difficult. The manufacturer highlighted it with the appropriate pattern. a curved arrow.

READ  How To Play Games On A Weak Laptop

If you need to get into the BIOS on a Lenovo laptop, then instead of the power button, you need to press the Novo Button. At boot, the system will enter BIOS.

Please note that the BIOS will not appear on the monitor immediately. To enter the program, you need to perform one more step. find in the “Novo Button” menu the option to boot the laptop “BIOS Setup”, which is selected with the mouse button. After selecting, press the Enter key on the keyboard. You are logged into the software.

How to enter BIOS of Lenovo laptop: method 1

Hardware manufacturer Lenovo has created its own software called Lenovo One Key Recovery, a system that includes the ability to back up and restore data to Lenovo PCs. In order to turn it on, there is an additional button on the laptop. Novo. It is found on almost all the latest laptop models from Lenovo and is located either on the side of the case or near the power button. Sometimes, in the most modern models, there is a small hole inside which there is a microswitch. In this case, you need to use a thin, non-sharp object. for example, a paper clip.

And despite the fact that the direct purpose of this button is not to call the BIOS, you can still get into the BIOS using it:

  • Turn off the device by holding down the power key for 10-15 seconds;
  • Hold the Novo key for 2-3 seconds and release;
  • Your laptop turns on and opens a small menu with a choice. click on the line with the signature “BIOS Setup”.

Entering BIOS on Lenovo Laptop: Method 2

Entering the BIOS on a Lenovo laptop is carried out in several ways. unfortunately, there is no single solution for how to get into the BIOS for everyone, but the ways to start it are quite simple. So, let’s move on to the first method.

The most popular solution is to use the keyboard. pressing several buttons at the same time on the laptop immediately after starting it up. Turn off your laptop (this method will not work with enabled), then press the power button and immediately one of the options:

  • F2 button or Del button;
  • Combination FnF2;
  • F1 key

If the BIOS was launched incorrectly, the computer will boot the OS normally. In this case, you will have to turn it off again and call the BIOS again, but using the new boot method. In order not to play the “guessing game” and start the BIOS faster, you can also look at the instructions for the Lenovo laptop.

It also happens that the laptop starts up too quickly, and the user does not have time to press the required combination. To avoid this, turn off the laptop by holding down the power key for 10-15 seconds. Then hold down the desired combination to enter the BIOS, and then press the power button and release, while continuing to hold down the keys to enter the BIOS until the desired screen with parameters appears in front of you.

How to Enter BIOS on Lenovo Laptop: Method 4

If you have Windows 10, then there is another way to boot the BIOS, similar to the previous one. Here it is carried out in a slightly different way:

  • In the “Start” menu, click on “Options”, select “Update and Security”;
  • Open the “Recovery” tab and click on restart under the “Special boot options” label;
  • The device reboots, and we see an action selection window. After you enter the desired menu, do the same as in the previous paragraph when starting BIOS on Windows1.

If, when using this or the previous method, you did not see the “UEFI Firmware Options” button on the screen, this means either that this laptop has an outdated BIOS version without UEFI, or that the OS was installed on the laptop in Legacy mode. Then work with UEFI is not available from the operating system. you will have to use the first two methods.

How to enter BIOS of Lenovo laptop: method 3

Around the same time that a new BIOS version called UEFI was released, the new Windows 8.1 operating system was released. And along with it, a new way of loading BIOS appeared. through the OS:

  • First you need to go to your desktop. Then we call the side menu of the Windows desktop. to do this, move the mouse cursor to the lower right corner of the desktop. Select “Settings”. “Change computer settings”;
  • Then go to the menu item “Update and recovery”, and then under the line “Special boot options” press the restart button;
  • After the reboot has been completed, we get to the screen with the ability to select an action. Click on the “Diagnostics” tile and then on “UEFI Firmware Settings”;
  • Confirm the selection by clicking on the “Restart” button. Done, the laptop entered the BIOS!

Entering BIOS on Lenovo laptop

Probably, there are no PC users who, at least once during the entire time of their work with a computer, would not need to enter the BIOS. Those who use Lenovo products did not stand aside either. This manufacturer has a huge list of laptops, and not all of them can enter the BIOS in the same way, but it is easy to configure it. the functions are the same everywhere. Today we will try to figure out how to enter the BIOS in a lenovo laptop, be it Lenovo s9, Lenovo z50 or Lenovo b50.

Why might there be a need to enter BIOS on Lenovo at all? Even despite the fact that laptop manufacturers in each new released model try to minimize the requirements for PC knowledge from the user and give the simplest answer to the question of how to set it up or determine the cause of problems, sometimes it becomes necessary to fine-tune the parameters. What you can use this input for:

  • Turning on and off some of the hardware parts of the laptop, diagnosing problems;
  • Configuring boot parameters for the OS and the entire device;
  • Setting up the disk subsystem, in particular, the modes of its operation;
  • Customization of many other functions, parts or system in general.

How to enter BIOS: method 5

The latter method is the most radical, and can only be recommended to those users who already have good experience in disassembling such a device. Otherwise, you run the risk of irreparably damaging your Lenovo laptop.

The essence of the method is as follows: to reset all BIOS settings, you need to disconnect for a while a special CMOS battery that is connected to the motherboard of the device. After performing this action, the device will “think” that the settings may be incorrect and will prompt you to open the BIOS to correct them, or it will enter it on its own.

BIOS batteries look different and in almost every model each has its own place, so you have to dig around before you get to it and unplug it. But in general, the procedure is as follows:

  • Disconnect the laptop, remove the battery;
  • Access the CMOS battery and carefully disconnect it from the motherboard;
  • Wait 15-20 minutes (this is necessary so that the CMOS chip is de-energized and the capacitors on the motherboard are discharged);
  • Connect the battery back, assemble the laptop, plug in the power and turn on the device;
  • If you did everything correctly, you will see the BIOS settings screen.
READ  Laptop Cannot Connect To TV Via HDMI

We hope that one of the above methods helped you find the answer to the question of how to enter BIOS on a Lenovo P70, G50-80, Lenovo ThinkPad T400 or T440 laptop.

How to enter BIOS on Lenovo computers?

Lenovo is one of the largest computer companies in the world. And since the demand for the products of this company is growing, the questions about the correct operation and operation of Lenovo equipment are becoming more and more relevant for users. And for those who decided to reinstall Windows, at the very beginning of the process, the question is raised: how to enter Lenovo BIOS?

First, you need to figure out what BIOS is and what it is eaten with. So, BIOS on Lenovo is a special microscopic program that ensures correct and stable interaction between all components of the PC and OS and allows you to customize it. And the BIOS setting is a standard PC setting that helps the system calculate the functions that should be activated and how they should be loaded. BIOS is on any computer, be it Lenovo B560, Lenovo S21 or M5400.

To date, several different versions of Bios have been created, which differ slightly in appearance, but as for the functions, everything is identical here. Each of the versions is used for the initial setup of the computer and for testing it. The BIOS functionality includes:

  • Date and time setting;
  • Selecting the boot sector. the device from which the operating system will be installed or loaded;
  • Checking system components, including checking the health of RAM and hard drives;
  • Connection protection. password on your laptop to protect personal data.

How to enter BIOS

Notebook BIOS entry methods may differ on different Lenovo models. First, try the standard login method. when you start a personal computer, you need to press the F2 button on the keyboard, sometimes holding down the Fn key before that. Next, the PC parameters menu will be called.

But this method is not always working. For some Lenovo models, the BIOS does not load when you press F2 or FnF2. for example, Lenovo Legion Y520, Lenovo G70, G50-30, or G500. If you tried to enter the BIOS using the above method, and you did not succeed, the following instruction is for you:

  • On the side of the laptop (where the charging socket is usually located) or right next to the power button, there should be a special small key with a curved arrow. It’s called Novo Button, One Key Recovery, or One Key Rescue System. You need to turn off the laptop and click on it.
  • If you pressed the correct button, the laptop will start, and on the screen you will see that we are going to a special startup menu:
  • Normal Startup
  • BIOS Setup (parameters);
  • System Recovery (system recovery);
  • Boot Menu.
  • As you probably already guessed, in order to enter BIOS on Lenovo, you need to go to BIOSSetup. After you select it, you will see that the laptop entered the BIOS and you can configure it as you like.

Two secrets of running BIOS

But if you still did not manage to start the BIOS using one of the above methods, and the laptop is running Windows 8.1 or higher, we will tell you two startup secrets.

  • You need to turn on the PC. In a running computer on the desktop, drag the mouse pointer to the lower right corner of the desktop (call the side menu).
  • A menu opens to us, where we select the items “Options”. “Update and Recovery”. “Recovery”.
  • Here, in the “Special boot options” section, click on the “Reload now” button.
  • Next, a blue screen with tiles will open. Open the “Diagnostics” tile, by clicking on which you will be taken to additional parameters.
  • You need to open the item “UEFI Firmware Options” and click the “Restart” button. Done! You are in BIOS!

Second secret. Many Win 8.1 users make an error when trying to enter BIOS. Everyone knows how to get into the BIOS. you need to press a certain button on the keyboard. To do this, the user clicks on “Shutdown”, waits for the laptop to turn off, and then presses the button to enter the BIOS, but the computer starts up as before. the OS is loading.

The whole problem is that the Windows 8.1 operating system works initially with the fast startup function, which is based on sleep mode. enter the BIOS without turning off the PC, but restarting it.

Some helpful tips:

  • After entering the BIOS, go to the various settings of the system parameters and its boot in the BIOS itself. Be very careful and careful, and it is better not to touch what you do not know, as there is a risk of doing something wrong and completely losing your computer. After making all the changes, go to the “Exit” section and select “Save exit”. After that, the laptop will be restarted, and on a new start, all the settings that you had to set before will already be taken into account.
  • If the above methods of entering BIOS on a Lenovo laptop do not work, try holding down the F12 key while starting the device until the BIOS starts. this method works on some Lenovo models.
  • It is very rare, but it still happens. in some models the F1 key works (you need to press it several times while the laptop turns on).
  • Manufacturers recommend adjusting PC settings in BIOS only with a fully charged laptop battery, since if during the setup process your laptop turns off due to being discharged, then this is likely to cause some system problems in the future.
  • Before exiting BIOS, be sure to save all changes so as not to get lost.

Remember that BIOS setup is a very serious undertaking that requires maximum understanding of the process and great attention to detail. You should be aware that if the configuration is incorrect, some components of the system may not work correctly, which brings additional difficulties in operation. And if you doubt that you know how to do it right, it is better to call qualified specialists, this will save money, time, and nerves. We hope this article helped you figure out how to enter BIOS.

Common mistakes when using the method

  • In most cases, after pressing the keys, the expected loading of the BIOS setup screen does not occur due to an incorrectly selected key / key combination for entering. It is worth trying all of the above keys and combinations in order. To reliably find out which key or key combination is exactly right, you need to refer to the documentation for your particular laptop model. You can find and download it on the official Lenovo technical support website.
  • In addition, a very short delay between the initialization of the laptop’s hardware components and the start of the operating system loading may be to blame for the failure. The user simply does not have time to get into this short period of time and the keystroke is not processed by the system as needed. In order to exclude this option, you can try the following:
  • Turn off the laptop completely. To turn off completely, you need to hold the power button for 10-15 seconds.
  • First, press and hold the BIOS entry key or key combination.
  • We briefly press the power button and do not release the enter key or key combination until the screen with BIOS settings appears.
READ  How to Connect Wireless Headphones to Lenovo Laptop

Reset

This way of entering BIOS is quite cardinal. It can be recommended only for experienced users, as it implies opening the laptop case, and in some cases its complete disassembly.

The method is as follows. In order to reset the BIOS settings, you need to disconnect for a while a special CMOS battery connected to the laptop motherboard. After resetting the settings, the system will “understand” that the parameters may be set incorrectly and will offer to enter the BIOS for configuration, or will open the settings screen automatically.

A laptop CMOS battery usually looks something like this:

But there may be options:

In addition to the various types of batteries used, it is also worth noting the lack of standardization regarding the location of the battery on the motherboard.
Quite often, you can access the battery just by opening the cover of the hard drive bay:

But there are also common cases in which to access the battery you will have to disassemble the laptop almost completely and even remove the motherboard:

In general, the methodology of the method is as follows:

  • Disconnect the laptop from the power supply, remove the battery.
  • We get access to the battery and disconnect it from the laptop motherboard.
  • We are waiting for 10-15 minutes.
  • We connect the battery in place, assemble the laptop, connect the power and start the device.
  • If successful, a screen will appear prompting you to enter the BIOS, or the settings window will automatically open.

Common mistakes when using the method

When the UEFI Firmware Options item is missing from the Advanced Options screen,

  • the device uses an old BIOS version without UEFI support;
  • the operating system was installed in “Legacy” boot mode and the UEFI communication functions are not available from the booted Windows.

Tip: In order to be able to enter the laptop BIOS settings in the future using the keyboard keys when turning on the device, you can disable the “Windows 10 Quick Start” function. For this:

    In the “Control Panel” select the item “Power supply”.

In the menu on the left, click on the link “Action of the power button”.

In the window that opens, click on the link “Changing parameters that are currently unavailable”.

  • Uncheck the box “Enable fast startup (recommended)” and then click on the button “Save changes”.
  • Keyboard shortcuts

    The most common and frequently used way to enter BIOS settings is by pressing a certain key or key combination on the keyboard, immediately after turning on the device. On the switched off laptop, the power button is pressed and, almost immediately, we press one of three options:

  • In very rare cases, on older Lenovo notebook models, the F1 key is used.
  • Windows 8 (8.1)

    The release of the Windows 8 operating system almost coincided with the massive introduction, including into Lenovo laptop computers, of the new BIOS version. UEFI. For users, the new version of the basic I / O system brought a lot of interesting features, including a new way to enter the BIOS. reboot from the OS.

      In Windows 8, we call the “Computer Settings” window. To do this, you can open the side panel on the desktop by moving the mouse cursor to the lower right corner, click the “Settings” button, then click on the inscription: “Change computer settings”.

    Or, on the initial screen of the Metro interface, click on the button with the gear icon.

    In the “Computer Settings” window, select the “Update and Recovery” tab.

    In the “Update and Recovery” section, click “Recovery”, then under the “Special boot options” label, click on the “Restart now” button.

    After rebooting, the Select Action screen appears. Here you need to click on the “Diagnostics” button.

    Go to the section “Additional parameters”.

    Click the “UEFI Firmware Options” tab.

  • We confirm the reboot into UEFI by clicking on the “Restart” button and the BIOS settings screen appears in front of us.
  • Windows 10

    In the newest version of the Windows operating system, the ability to reboot to UEFI using the “Special Boot Options” screen was inherited from Windows 8. Only the “Computer Settings” window is opened differently.

      Press the Settings button in the Start menu.

    Or open the notification panel by clicking on the icon in the lower right corner of the screen, and press the button “All parameters”.

    In the “Windows Settings” window that opens, select “Update and Security”.

    In the next window, go to the “Recovery” tab and click the “Restart now” button in the “Special boot options” section.

    A reboot takes place, and we get to the “Select action” screen.

    Optional: For a quick reboot to the diagnostic and system recovery screen, you can use the command line (this method works in Windows 8 / 8.1 as well).

      We launch the command line on behalf of the Administrator by right-clicking on the “Start” button and from the menu that opens, selecting “Command line (Administrator)”.

  • A reboot will occur within 60 seconds.
  • Further, by analogy with the steps in Windows 8: “Troubleshooting”. “Advanced options”. “UEFI firmware options”. “Restart” button.
  • Common mistakes when using the method

    If the window with a choice of functions does not appear, you should make sure that the device has been turned off completely. You can remove and install the laptop battery if it is removable. In addition, you should not “overexpose” the “NOVO” button, or vice versa, “do not press out”. One short but firm press with a slight delay.