How To Enable Virtual Keyboard On Laptop

Service start

If you were unable to open the touch keyboard, then, most likely, the service that is responsible for starting it is disabled on your device.

To check this by opening the Run window. With a combination of WinR. And enter the services.Msc command in the field. Click “OK”.

When a window with all the services opens, find the name “Touch keyboard and handwriting panel service” in the list and double-click on it.

Then select “Startup type”. “Manual” and press the “Start” button. For the service to start working. Save changes with the “OK” button.

If your touch keyboard appears some time after the operating system boots, then go to the properties of this service and select “Startup type” or “Manual”. Or you can put it “disabled” at all. If you do NOT plan to use the keyboard.

Search bar

Go to the search box on the taskbar.

Start typing the name of the program and click on its icon, which will most likely be in the first place in the list of results.

Calling the operating system parameters window in any way, for example, using the gear icon in the start.

Go to the subsection “Accessibility”.

Go to the section titled “Keyboard”.

Move the switch “Use the device without the usual.” to the “On” position.

The display will show the application interface.

Troubleshoot launching on-screen keyboard

The attempt to launch the On-Screen Keyboard is not always successful. Sometimes a problem arises when after clicking on an icon or using a hotkey, absolutely nothing happens. In this case, you need to check the health of the application service. You can do it like this:

    Open “Start” and search for “Services”.

Scroll down the list and double-click on the line “Touch Keyboard and Handwriting Panel Service”.

Set the appropriate startup type and start the service. Don’t forget to apply the settings after the changes.

If you find that the service is constantly stopping and even setting automatic start does not help, we recommend that you scan your computer for viruses, clean the registry settings and scan system files. All the necessary articles on this topic can be found on the following links.

Of course, On-Screen Keyboard will NOT be able to replace a full-fledged input device, but at times such a built-in tool can be quite useful and convenient to use.

Thank the author, share the article on social networks.

Task bar

This interface element contains buttons for quickly launching system utilities, and the user is free to add and remove the necessary / unnecessary shortcuts.

READ  How to make a slideshow on a laptop

Right-click on the Taskbar and check the box “Show touch button.”.

A new element will appear in the tray. an icon for launching the touch keyboard.

Calling On-Screen Keyboard in Windows 10

The keyboard is not always at hand, or it is simply inconvenient to type with it, so users are looking for alternative input options. The developers of the Windows 10 operating system have added a built-in on-screen keyboard, which is controlled by mouse clicks or tapping on the touchpad. Today we would like to talk about all the available methods for calling this tool.

How to launch

There are many ways to open the on-screen keyboard in Windows 10: a hotkey combination assigned to an action, a console command, a shortcut in the start (via Search), from the notification area, the Accessibility panel. Let’s consider all of them, also dwell on the settings of the utility and problems with its functioning.

Options menu

Almost all parameters of the operating system can be customized through a special menu. In addition, various components are activated and deactivated here, including the On-Screen Keyboard application. It is called as follows:

    Open “Start” and go to “Settings”.

Select the category “Accessibility”.

Move the “Use On-Screen Keyboard” slider to “On”.

The application in question will now appear on the screen. Disabling it can be done in the same way. by moving the slider.

Using settings

  • Press the keyboard shortcut CtrlI. If the keyboard doesn’t work:
  • Click on start, Windows logo, click on gears.

In the settings menu that opens, select Accessibility

  • In the left menu, select Keyboard.
  • And you will see a switch to enable / disable the Onscreen Keyboard.
  • How to set up the virtual keyboard

    Let’s bring out the device, it can be configured for comfortable use:

    • Enable sound accompaniment for turning on the keys;
    • Enter additional keys;
    • Change font parameters;
    • Disable its display on top of other windows;
    • Set to auto-appear after turning on the PC.

    The on-screen keyboard launches itself

    It may happen that the virtual keyboard starts to turn on itself without your task. This means that someone on your PC has configured the spec. Features Windows 10. To disable the self-launching utility Do the following:

    • Let’s go to the “Control Panel” using the method described above;
    • Further, in the “Center for special. Opportunities “;
    • In this window, we are looking for the command “Using a computer without.”;
    • Follow the link and remove the checkbox from the command “Use on-screen keyboard”.
    READ  Installing Windows from a USB flash drive on an HP laptop

    After doing the top steps, the virtual keyboard will no longer start randomly.

    Best regards, Andrey Zimin 09/19/2019

    Run box

    Quite a simple and convenient way. So, first we type the WinR hotkeys, a new window pops up in which you need to enter the osk combination, click OK. A keyboard appears on the display.

    The disadvantage of this method is that you still have to connect a keyboard to enter osk. Therefore, for this method, you need to take Claudia to a friend for a while. But, if this is not possible, then you can act differently. Let’s make a list of the required commands, in which Try not to forget to mark and osk.

    On-screen keyboard how to turn on Windows 10

    As I said above, there are two types of On-Screen Keyboard on Windows OS. Their principle of operation is practically the same, but with their own specific design. There are five of the ten such launch methods. On earlier versions, 3. 4. All methods are simple and easy to remember.

    Doesn’t want to turn on the virtual keyboard

    It is unlikely, but it is possible that none of the ways to launch the virtual keyboard did NOT work. Then, most likely you turned off the service responsible for running this utility. Of course, you need to turn it on again, which we will do:

    • Click on “Start” with the right key and then on the command “Run”;
    • In the window we already know, enter the combination services.Msc to go to the “Services” window;
    • Then, in the list of commands, you need to find “Touch keyboard service.”. Next, you need to click on the term a couple of times with the mouse;
    • A new window will pop up. In it, you need to click the “Run” button. Attention! If the command “Run” not active, you must first call it “Stop”, after that we will start the service again.

    Having done the listed actions, it remains for us to launch the virtual keyboard using one of the methods indicated above.

    How to start and disable automatic loading of the input device when entering the OS

    Launch and enter device

    The automatic appearance of the device on the screen when Windows starts is an important point for the user if he resorts to using it all the time, or if the password for the account is supposed to be entered precisely through the virtual keys.

    READ  Connect Canon Printer To Laptop

    To start or get rid of startup, you can use several options:

    • Call the virtual version on the monitor and click “Parameters” below;
    • Activate the link at the bottom of the window “control the launch of the On-Screen Keyboard at login”;
    • Open “accessibility” in the control panel;
    • Select “Using a computer without a mouse or keys”;
    • In the pop-up window, check the box next to “use screen hardware” and click “OK”.

    Action steps

    After that, the device will pop up automatically on the monitor. If you do everything the other way around, then you can remove autorun.

    Setting the keyboard application

    Availability The on-screen keyboard is a useful device for a user whose activity is associated with a computer. She will be able to make up for the lack of a button analog. This function is available for download and is also built into the OS. If all the above steps are not available, you need to read in detail the instructions on how to display the virtual keyboard on the laptop screen for different versions of Windows.

    Quick Launch Bar

    On the case quick launch panel there is an option to pre-arrange the virtual keyboard for such cases.

    enable, virtual, keyboard, laptop
    • To do this, right-click on the clock image, in the context menu, select “Show. Keyboards”;
    • Further, on this panel you will have a shortcut with a keyboard. You just need to name it with a mouse. Then a virtual keyboard will appear, created in touch design.

    Windows 7

    Configuring Windows 7

    After displaying a virtual version on the screen, users see an analogue of a physical device in front of them. But it lacks a digital block and it is small, which can be changed in the “Settings”. To do this, you should:

    • Will put a check mark in the “sound alert”;
    • Check “numeric keypad”;
    • Next “Hover over keys”.

    If the sound annoys when you press the keys, uncheck the corresponding box.

    To switch the language, you must first use Alt, then Shift, then Shift again.

    To use hotkeys, you need to successively press Ctrl, and then Z.