How to enable geolocation on iPhone 6

Table of Contents

IPhone Settings

Depending on the version of iOS on your device, the name of some settings items may differ slightly from those described in the instructions:

    Open the phone settings section and there go to “Privacy”.

Then select “Geolocation Services”.

Opposite the point of the same name, you need to put the switch in the on position. At the bottom of the screen, you can see a list of all applications for which this function will be used.

  • You can change the app’s geolocation settings. Just click on the one you are interested in and you will be presented with several options:
  • “Never”. In this case, the application will not receive any data on the user’s location;
  • “When using the program.” Geolocation data will be transmitted only when using this or that application;
  • “Always”. The app gets access to your location data even while in the background. This option is the most energy-intensive, but necessary for the correct operation of applications such as “Navigator” and “Maps”.
  • Once you select the option you want, it will be applied by default to the selected application. You can configure any application that has a geolocation binding.
  • Turn on geolocation on iPhone 6

    Geolocation is a special function that allows you to track the user’s location in real time and with high accuracy. It may be required for applications such as maps, social networks, and others where location determination may be required. If it does not happen, then most likely the geolocation function itself is disabled on your device.

    Enabling Geolocation on iPhone

    There are two ways to enable automatic location of your device:

    • Via iPhone system settings;
    • Through an application that requires geolocation to work correctly. For example, a maps app.

    Next, we will consider all two methods in more detail.

    Through the app

    When you install an application that may require access to geolocation data, you will receive an alert prompting you to allow access. The instructions for this option are as follows:

    • Run the program for the first time. It must be downloaded and installed via the AppStore.
    • On first launch, the app will ask you to access your location data. Here you need to click the “Allow” button.
  • If, during the first launch, for some reason, you prohibited the application from accessing your geolocation data, then it can be reopened using the first option.
  • Using these instructions, you can turn on geolocation not only on the iPhone 6, but also on other models. 4, 5, 7, etc. Although activating this function can negatively affect the battery life of the phone, it is sometimes necessary for the correct operation of many applications.

    How to enable location service on iPhone?

    To answer this question, we need to find the location of the geolocations in the iPhone settings. Go to the “Settings” section. “Confidentiality” “Geolocation Services”.

    You can customize each app to your liking. We advise you to understand in detail the services and applications or games that you use most often. Flexible customization can significantly save your iPhone’s battery.

    To enable the Coarse Location service for your iPhone, check the slider that was moved to the right. If tracking is working properly, the slider will be green, as shown in the screenshot.

    For reference! It’s easy to enable geolocation on iPhone 6 or newer iPhone 7. Our instruction is universal and is based on the updated version of the software. iOS 11.

    Geolocation on iPhone. Enabling, disabling and configuring tracking

    Today we will look at how to enable geolocation on the iPhone 5s (for example) and related services that ensure the smooth operation of the device, as well as programs for collecting and processing confidential information.

    To answer the question “Where to enable geolocation in the iPhone”, we will try to figure out what the meaning of this function is and to whom it will be useful.

    Many of us do not know how to turn on the location finder service on the iPhone, nor do we know how to turn it off. This is not difficult. Read carefully the table of contents in the instructions and choose the most suitable solution to the problem.

    Location services on iPhone. What is it and how are they useful??

    Geolocation in iPhone is an integral part of your device. They allow you to track your location all day long. It all depends on the settings, which have a rather flexible functional interface. One of the most striking examples is the search for the most convenient restaurant or cafe for you, the nearest taxi, car-sharing car, as well as an available hotel room.

    Most of the services that determine the location of you and your iPhone in particular are easily configured through the standard settings. Apple for setting up geolocations on the iPhone highlights a whole menu item in which you can enable or disable items that use location data, including system services.

    You must understand perfectly well. The more apps use your location data, the faster your iPhone‘s battery will drain and deteriorate over time. That is why flexible configuration of geolocations in the iPhone is so important, which we will tell you about in more detail below.

    How to set up geolocation on iPhone?

    The needs of the applications that users install on their devices are different from others. That is why we cannot say for sure what you should enable or disable in the geo-location data settings. But, we will try to provide detailed information about system location data so that you can make the most informed decision when enabling or disabling various functions.

    To set up geolocation on the iPhone, go to the “Geolocation Services” menu item, which you already know from the previous step of the instruction. Scroll down the list of suggested options. Go to “System Services”. It will also allow you to answer one of the popular questions: “Geolocation in the iPhone, where to find?”.

    We advise you to leave enabled services such as: “Calibrate compass” and “Tracking”, “Find iPhone”, “Time zone” and “Find cellular network”.

    To determine the location of a person or iPhone, you should carefully prepare your geolocation settings. This is necessary so that no one else but you can change the GPS settings or completely disable the tracking services “Find iPhone”.

    You should impose restrictions on the use of settings in the menu of your iPhone. Go to “Settings”. “Basic”. “Restrictions”. Enter the preset passcode. Scroll through the restriction settings to the “Privacy” section. “Geolocation Services”.

    How to set up geolocation on iPhone

    So, in order to enable geolocation on the iPhone, you first need to go to the “Settings” application. To do this, just click on the corresponding icon on the iPhone desktop.

    After that, you need to go to the settings section called “Privacy”.

    READ  How to connect wired headphones to iPhone

    Next, you need to open the subsection “Geolocation Services”, it should be at the very top. If geolocation is turned off, then “Off” will be indicated in front of this subsection.

    After that, the geolocation settings will open in front of you. In order to enable geolocation, simply move the switch to the “On” position.

    After enabling geolocation services, a list of programs that use or do not use geolocation will appear at the bottom. If “Never” is indicated next to the program, it means that the use of geolocation is prohibited for this program. In this case, the program will not be able to use geolocation, even if “Geolocation Services” are enabled. In order to enable geolocation for such a program, you need to open it in this list and change the value “Never” to “When using the program” or “Always”.

    At the bottom of the list of applications there is a section called “System Services”.

    Additional geolocation settings on iPhone are available in the “System Services” section.

    Here you can turn on or off Apple’s geolocation-based ads, geolocation-based alerts, and other similar features.

    Here’s how to turn location and GPS services on or off for individual programs.

    How to enable location data on iPhone 6

    Many iPhone applications require geolocation to be enabled during their operation. These are usually applications that provide information based on your location. For example, applications for navigation or monitoring local weather cannot do without properly configured geolocation. In addition, other applications need geolocation data. For example, with geolocation enabled, the camera can record the coordinates of the point where the picture was taken.

    In this article, we’ll show you how to enable geolocation on iPhone. The article will be useful for owners of almost all iPhone models, including iPhone 4, 4s, 5, 5s, 5c, 6, 6s and 7.

    Geolocation settings

    In the list, you can see programs with different levels of access to location information:

    • “Never”. the application does not receive any information about the location of the smartphone;
    • “While using the application”. the application uses location data only during its active work, and does not use information in the background;
    • “Always”. the application uses geolocation even in the sleep mode of the smartphone.

    Many programs additionally request permission to use location data. By clicking on the “Allow” button, the user opens the software access to the information of the geolocation services. If the “Do not allow” option is selected, the program will not use the location without first asking and receiving a satisfactory answer.

    What to do if geolocation is always on on iPhone

    If the function works on an ongoing basis, it means that some application, without the knowledge of the owner of the device, is using data about the location of the device.

    • Go to “Settings”. “Privacy”. “Geolocation Services”.
    • In the list of applications using geodata, we identify the one opposite which is marked “Always”.
    • Change the access level to “Never” or “When using the program”.

    There can be several programs with permanent access to geodata. Review the list carefully before setting up.

    Enabling smartphone settings

    To enable recording of smartphone geodata, we will follow simple steps:

    • Go to iPhone Settings.
    • Go to the section “Confidentiality”. “Geolocation Services”.
    • We activate the location recognition function by moving the switch to the “On” position (the switch will turn green).
    • Scroll down the menu to the list of all applications that use smartphone geodata.

    From now on, we proceed to configuring this service.

    Enabling or disabling location services for specific applications

    This may display explanations about how programs use your location information. Some programs can only offer two options. Learn more about privacy and location services.

    In this article, we will look at such a useful feature as geolocation. It is present on all modern devices, is an integral part of the work of many programs: weather widgets, navigators and others. The presented instructions are useful for owners of iPhone 4 version and newer Apple devices.

    Geolocation (geolocation) is a special tool that tracks the location of the phone on the ground. The provided data is used by maps to build a route, weather applications to provide accurate weather forecast data in a specific area, a camera to record the coordinates of the point at which a particular picture was taken.

    Without access to geodata, programs that use the device’s location are imprecise and useless. Therefore, immediately after entering the application, the smartphone can notify its owner about the disabled location function. There are several ways to activate it.

    enable, geolocation, iphone

    How to set up geolocation on iPhone

    So, in order to enable geolocation on the iPhone, you first need to go to the “Settings” application. To do this, just click on the corresponding icon on the iPhone desktop.

    After that, you need to go to the settings section called “Privacy”.

    Next, you need to open the subsection “Geolocation Services”, it should be at the very top. If geolocation is turned off, then “Off” will be indicated in front of this subsection.

    After that, the geolocation settings will open in front of you. In order to enable geolocation, simply move the switch to the “On” position.

    After enabling geolocation services, a list of programs that use or do not use geolocation will appear at the bottom. If “Never” is indicated next to the program, it means that the use of geolocation is prohibited for this program. In this case, the program will not be able to use geolocation, even if “Geolocation Services” are enabled. In order to enable geolocation for such a program, you need to open it in this list and change the value “Never” to “When using the program” or “Always”.

    At the bottom of the list of applications there is a section called “System Services”.

    Additional geolocation settings on iPhone are available in the “System Services” section.

    Here you can turn on or off Apple’s geolocation-based ads, geolocation-based alerts, and other similar features.

    Here’s how to turn location and GPS services on or off for individual programs.

    How to enable location data on iPhone 6

    Many iPhone applications require geolocation to be enabled during their operation. These are usually applications that provide information based on your location. For example, applications for navigation or monitoring local weather cannot do without properly configured geolocation. In addition, other applications need geolocation data. For example, with geolocation enabled, the camera can record the coordinates of the point where the picture was taken.

    In this article, we’ll show you how to enable geolocation on iPhone. The article will be useful for owners of almost all iPhone models, including iPhone 4, 4s, 5, 5s, 5c, 6, 6s and 7.

    iPhone 6 GPS not working iOS 11? Here’s the fix

    Remote activation of location service on iPhone

    Remote activation of the positioning function is possible only on jailbroken devices, in other words, jailbroken devices that are not supported by the developers.

    Starting geolocation from another device is implemented according to the following instructions:

    • Download from the Internet and install the Activator tweak from Cydia on your smartphone.
    • Launch the program and go to the settings.
    • Click on “Anywhere”. “Edit”.
    • From the list of options, select the item “Received message”, which allows you to create a new event New Event.
    • In the “Message” field, enter the text, when sent, a certain Activator action will take place, in this case. Location Services. It can be any code word, the main thing is that it does not appear in the user dictionary.
    • We leave the sender field empty so that you can get Activator to work from any phone.
    • Save the data and press the “Done” button to create an event.
    • Now you need to set the Activator to act on the created event. Go down and find the newly appeared message in the list of events.
    • Click on the item from the list containing the passphrase.
    • Now from the list of Activator actions, click on the switch to enable the function, and separately select the Location Services option to enable it.

    Geolocation settings

    In the list, you can see programs with different levels of access to location information:

    • “Never”. the application does not receive any information about the location of the smartphone;
    • “While using the application”. the application uses location data only during its active work, and does not use information in the background;
    • “Always”. the application uses geolocation even in the sleep mode of the smartphone.
    READ  How to enable Memoji on iPhone

    Many programs additionally request permission to use location data. By clicking on the “Allow” button, the user opens the software access to the information of the geolocation services. If the “Do not allow” option is selected, the program will not use the location without first asking and receiving a satisfactory answer.

    Granting permission to use your location data

    Some programs do not work without geolocation services enabled. 1 The first time a program needs access to location services information, a permission prompt is displayed. Please select one of the following options.

    • Click “Allow” to allow the program to use the geolocation services information as needed.
    • Click “Don’t Allow” to deny access. 2
    • Click “Ask next time” and select “When using the program”, “Allow once” or “Do not allow”.

    IOS devices can use Wi-Fi and Bluetooth for positioning. GPS and cellular data can be used to determine location on iPhones and iPads (Wi-Fi Cellular).

    How to enable geolocation on iPhone

    Many iPhone applications require geolocation to be enabled during their operation. These are usually applications that provide information based on your location. For example, applications for navigation or monitoring local weather cannot do without properly configured geolocation. In addition, other applications need geolocation data. For example, with geolocation enabled, the camera can record the coordinates of the point where the picture was taken.

    In this article, we’ll show you how to enable geolocation on iPhone. The article will be useful for owners of almost all iPhone models, including iPhone 4, 4s, 5, 5s, 5c, 6, 6s and 7.

    How to set up geolocation on iPhone

    So, in order to enable geolocation on the iPhone, you first need to go to the “Settings” application. To do this, just click on the corresponding icon on the iPhone desktop.

    After that, you need to go to the settings section called “Privacy”.

    Next, you need to open the subsection “Geolocation Services”, it should be at the very top. If geolocation is turned off, then “Off” will be indicated in front of this subsection.

    After that, the geolocation settings will open in front of you. In order to enable geolocation, simply move the switch to the “On” position.

    After enabling geolocation services, a list of programs that use or do not use geolocation will appear at the bottom. If “Never” is indicated next to the program, it means that the use of geolocation is prohibited for this program. In this case, the program will not be able to use geolocation, even if “Geolocation Services” are enabled. In order to enable geolocation for such a program, you need to open it in this list and change the value “Never” to “When using the program” or “Always”.

    Reset Location Settings on iPhone

    At the bottom of the list of applications there is a section called “System Services”.

    Additional geolocation settings on iPhone are available in the “System Services” section.

    Here you can turn on or off Apple’s geolocation-based ads, geolocation-based alerts, and other similar features.

    We activate geolocation on the iPhone

    You can enable iPhone location determination in two ways: through the phone settings and directly using the application itself, which requires this function to work correctly. Let’s consider both methods in more detail.

    How to enable geolocation on iPhone

    IPhone Settings

  • As a rule, there are three items in the settings of the selected program:
  • Never. This parameter completely denies access to the user’s geodata.
  • When using the program. Location request will be carried out only when working with the application.
  • Always. The application will have access in the background, i.e., in a minimized state. This type of user location is considered the most energy-consuming, however, it is sometimes necessary for tools such as a navigator.
  • Check the required option. From this moment on, the change is accepted, which means that you can close the settings window.
  • application

    After installing an application from the App Store, for the correct functioning of which it is required to determine the user’s location, as a rule, a request is displayed to provide access to the geolocation.

  • If for some reason you refuse to provide access to this setting, you can subsequently activate it through the phone parameters (see the first method).
  • And although the geolocation function can negatively affect the battery life of the iPhone, it is difficult to imagine the work of many programs without this tool. Fortunately, you can independently decide in which of them it will function and in which it will not.

    On iPhone

    The step-by-step instruction looks like this:

    • Go to settings. The corresponding icon is on the desktop.
    • There go to the “Privacy” section, then “Geolocation Services”.
    • Place the switch in the “On” position (it should turn green, but not white or gray) next to “Location Services”. Done!

    Note that this window also has a list of programs below. It allows you to choose how to use the location function for each specific application.

    Click on the program and choose one of the options:

    • never. access to the function is completely blocked;
    • ask next time. in the future you can choose when starting the software whether to use geolocation when using the application (there are also options “Allow once” and “Do not allow”);
    • when using the program, that is, only when you are using it;
    • always.

    People are also often looking for information about whether it is possible to enable location detection remotely. There is such an opportunity, but for this you need to install one of the programs on the device in advance, for example, Activator from Cydia.

    If there is no such software initially, it is impossible to remotely control this service. Therefore, all these instructions on the Internet make very little sense.

    How to enable geolocation on iPhone and Android smartphones?

    Every smartphone user needs to know how to enable geolocation. Among other things, this need arises due to the fact that this service severely drains the battery. Therefore, you need to understand how to turn it off.

    Let’s see how the task is performed on iPhone and Android.

    On Android

    It’s much easier on Android devices. The most common way to enable geolocation is to open the top notification curtain and tap on the Location Data icon (it can also be called Geolocation). This is how it looks.

    You can also use any application that needs to determine your position. It can be Yandex.Maps, Google Maps and the like. Open such a program and tap on the geolocation icon there. A notification will appear “To improve the operation of the application, turn on on the device”, click “OK” and the service needs to be started.

    Also on Android, you can use the settings, just like on iPhones. Open the settings via the icon on the desktop and go to the “Location data” section. Most often it is located in the “Privacy” block in the advanced settings. Put the switch to the “On” position next to “Access my location data”.

    Here you can also configure access to this function for specific applications. Also on Android there is a function to set the position detection mode. The user can choose which Internet sources should be used to complete this task. GPS, Wi-Fi, mobile networks, one thing or all together.

    All these settings look the same on smartphones and tablets from different brands. Xiaomi, Samsung, Meizu, and so on. So you can’t get confused.

    Tell your friends where you are

    It is sometimes very difficult to explain to a person where you are yourself. Such troubles are completely useless if you and your friends use iOS devices.

    Just open the chat details in the “Messages” by clicking “Details” and click “Send my current location”. Your interlocutor will receive a geotag, which can be immediately viewed in the “Maps” and quickly get directions to the destination. Instead of a thousand words, as they say.

    Through the app

    When you install an application that may require access to geolocation data, you will receive an alert prompting you to allow access. The instructions for this option are as follows:

    • Run the program for the first time. It must be downloaded and installed via the AppStore.
    • On first launch, the app will ask you to access your location data. Here you need to click the “Allow” button.
    READ  How to Transfer WhatsApp from Android to iPhone
  • If, during the first launch, for some reason, you prohibited the application from accessing your geolocation data, then it can be reopened using the first option.
  • Using these instructions, you can turn on geolocation not only on the iPhone 6, but also on other models. 4, 5, 7, etc. Although activating this function can negatively affect the battery life of the phone, it is sometimes necessary for the correct operation of many applications.

    useful tips for using geolocation on iPhone and iPad

    One simple fact: iPhones and iPads constantly track our location. I agree, it sounds creepy, but on the other hand, it’s incredibly convenient. In this article, we will introduce the GPS capabilities of the iPhone and iPad, in addition to using maps or navigators.

    How to change geolocation on iPhone: instructions

    For example, if the owner wants to change the location of his iPhone, then he should select the iPad item, if one, for example, lies at his home.

    The trick is that the second gadget should be located where the owner of the technology supposedly wants to be.

    Be aware of your friends’ movements

    An expanded use case for the previous tip, which will save your wife or girlfriend from calling you and asking you how soon you will be for dinner. Thanks to the preinstalled Find Friends application, you can see all movements of your favorite contacts on the map and share your.

    Find Friends has a notification function that lets you set up alerts when a person has left or arrived there. An amazingly handy piece for a family or for coordinating a large number of people when gathering for picnics, parties and other events.

    Do I need to disable geolocation of system services?

    The subsection “System services” is located at the very bottom of the block with a list of applications that need geolocation.

    A user who visits this subsection will see the following:

    Before deciding whether to disable geolocation for system services, you should figure out what functions are designed to perform at least some of them.

      Geolocation iAd. iPhone sends information to Apple about where and how fast the user is going. This is necessary so that the owner of the gadget can receive only those advertising offers that are relevant to him from a geographic point of view. Popular nearby. The iPhone periodically shares information with Apple about the places where the user made purchases. The information is anonymous and is required solely for statistical purposes. Traffic jams. iPhone sends GPS coordinates and speed information to Apple. This is necessary to replenish the traffic database.

    The listed system services are common to most versions of iOS. There is no need to describe all the services. and it is clear that their main purpose is to collect sensitive data about consumer preferences and send information to Apple. People who claim that Americans are spying on Russians through smartphones are not that far from the truth.

    If you do not want Apple, tracking your movements and purchases, to replenish its statistical databases, switch the toggle switches in the “System Services” section to the inactive position. It is recommended to do this for all Yabloko users: there is no benefit to the iPhone owner from services, but the charge is consumed faster because of them.

    Geolocation and GPS are one and the same?

    However, in order for geolocation to be available, it is not at all necessary to turn on GPS. other methods of calculating positional data are possible:

      Via bluetooth. The location of the object is determined using special Beacon beacons, which are located in public buildings. airports, hypermarkets. In terms of accuracy, this technology is inferior to GPS, because it provides a reliable result only if the object is stationary. Based on mobile stations. The smartphone knows from which station the GSM signal is sent to it and where this station is located. Therefore, using a special application containing a database of stations, you can use geolocation without GPS. Using this method, reliable results can be achieved in megalopolises where the network coverage is high, but in small cities it is problematic to determine geolocation through stations. Based on the Earth’s geomagnetic field. Navigation based on the planet’s geomagnetic field is the idea of ​​Saratov scientists. Each point on the Earth has a unique set of characteristics by which it is possible to determine the location of an object (including the iPhone). The technology is still being tested, but already now it is being given big advances.

    Despite the fact that geolocation and GPS are different concepts, and there are several ways to calculate positional data, at the moment it is possible to accurately determine the location of an object only through GPS.

    What to do if geolocation doesn’t work?

    If geolocation does not work, it is hardly a matter of mechanical failure of any part of the iPhone (for example, the GPS module). Most likely, the problem lies at the software level. What to do if a function refuses to function?

    Go to the “Geolocation Services” section and make sure that geolocation is activated for a specific application.

    Check if the Internet is turned on on the iPhone. The network makes it possible to more accurately position the device. Go to the “Cellular” section of the settings and make sure that the “Cellular data” slider is in the active position.

    If the above steps do not work, reset the settings after creating a backup copy (instructions for creating copies are located here). Follow the path “Settings”. “General”. “Reset” and select “Erase content and settings”.

    Doing so will erase all data from the iPhone.

    You need to check if geolocation works on a “clean” smartphone, that is, before restoring from a backup. If the function still does not work, you should contact the service.

    How to enable geolocation on iPhone?

    The algorithm for how to turn on geolocation on the iPhone differs only slightly from the method described above for turning off. The user also needs to follow the path “Settings”. “Privacy”. “Geolocation Services”. In the last section, he will see that there is only one slider (main), and there is no list of applications using geolocation.

    It is necessary to activate the toggle switch, then disconnect from geolocation those applications that do not really need this function.

    How to turn off geolocation on iPhone?

    The user meets a request to activate geolocation during the initial setup of the iPhone and, as a rule, unknowingly confirms it. Therefore, the question of disabling geolocation is more pressing than enabling it. You need to deactivate the function like this:

    In the “Settings” find the “Privacy” section (on some versions of iOS. “Privacy”) and go to it.

    Go to the subsection “Geolocation Services”. it goes first in the list.

    Toggle the toggle switch “Location Services” to the inactive position.

    Confirm your intention to deactivate geolocation. click “Disable”.

    Please note that the iPhone has a flexible setting: you can allow some applications to use geolocation, others. prohibit. To do this, you need to adjust the sliders located in the block below.

    For example, with the configuration as in the figure, you can use navigation, but geotags will not be attached to your photos.

    With flexible configuration, the main toggle switch “Geolocation Services” must be turned on.

    enable, geolocation, iphone

    How to enable / disable geolocation on iPhone?

    Geolocation is the process of locating the location of the iPhone. Unfortunately, it is customary to underestimate the importance of geolocation, despite the fact that without it you will not be able to use the navigator, attach geotags to a photo, or find an iPhone using the function of the same name. Users are more aware of the negative characteristic of geolocation. “gluttony”: by disabling the function, you can significantly increase the battery life of the gadget.

    Fortunately, the procedure for activating / deactivating geolocation is quite simple. you can turn it on while using the navigator, and keep it off the rest of the time.