How to distribute the Internet through an iPhone wire

If you cannot connect to the device in tethering mode via USB

To avoid additional data charges, turn off the Tethering feature when you don’t need it. If you do not do this, then each time an iOS device with an active “Tethering” function is connected to a computer for charging, this computer will use this function.

Follow these steps on a Mac or Windows PC.

Disable Wi-Fi system services

Many users are helped by disabling Wi-Fi system services in Settings Privacy Location Services System Services. This option only affects the location used by Wi-Fi networks, it will not turn off Wi-Fi completely.

Using a cable

The method is suitable for PCs and laptops, because here you cannot do without a USB cable. First, you need to connect the device to a computer or laptop using a cord, and then create an access point. The work is done through the configuration section. The algorithm is as follows:

  • go to phone settings;
  • go to the cellular section;
  • go to the data and cellular network settings section.

Scroll down the page and look at the settings. It is important that the APN is registered here. Most often it is assigned automatically (this fact depends on the operator). Login and password data does not matter. Next, go to modem mode and set the password for the access point.

To share the Internet via a wire from the iPhone, you do not need to enter a password. But it’s best not to ignore this possibility and set up a security code. Suddenly there will be no cord at hand and you will have to share Wi-Fi from 6 6s iPhone to a laptop or PC wirelessly.

To disable distribution, you must deactivate the modem mode, turn off Bluetooth or disconnect the cable, depending on the connection method.

Why iPhone won’t share Wi-Fi?

Many Apple phone owners know how to share Wi-Fi on the iPhone. However, they face connection difficulties. If problems arise, you need to take the following steps:

  • check the fact that the modem mode is enabled in the settings;

How to use Wired Internet ( Ethernet ) on Apple iPhone / iPad

  • reboot the device that needs to be connected;
  • make sure to install the latest iOS version;

If after these steps you cannot share Wi-Fi via iPhone to iPad or other device, you need to fix the errors. Let’s consider each situation separately. for WI-FI, Bluetooth or USB cable connection.

Most often, users are interested in why Wi-Fi is not distributed from the iPhone in standard modem mode. One of the reasons is errors in setting parameters. To troubleshoot the problem, take the following steps:

  • check if the entered password is correct;
  • reboot devices.
distribute, internet, iphone, wire

Knowing why iPhone isn’t sharing Wi-Fi to your laptop, PC, or other device can help you quickly reconnect. If there is no solution, use a USB cable. But even when connecting it, difficulties may arise. To fix the problem, take the following steps (for MAC):

  • update iTunes to the latest version;
  • assign a trusted device to the connected device;
  • make sure it is visible in iTunes on iPhone or iPad;
  • go to the system settings section and in the network section check the box in the iPhone USB section;
  • click the gear icon, select deactivate the service and apply the function;
  • click on the gear, activate the service and confirm the changes again.

If you cannot share Internet from iPhone to Windows PC, you need to update iTunes, make the connected device trusted and make sure that the device is recognized on the computer. Next, follow the Microsoft instructions for checking the quality of your Internet connection.

Auto connect problem

If you have connected your device to a Wi-Fi network once, then ideally in the future it will automatically connect to it. If it doesn’t and you need to connect manually, check the Auto-connect option. To do this, go to the Wi-Fi settings and the name of the network and make sure that the Auto connect option is enabled.

Connecting a Windows PC to the device in modem mode via USB

  • Update iTunes to the latest version.
  • Use a USB cable to connect an iPhone or iPad with Hotspot enabled to your computer. If required, make this device trusted.
  • Make sure your iPhone or iPad can be found and viewed in iTunes. If your Windows PC does not recognize your device, try a different USB cable.
  • Follow Microsoft’s instructions to test your Internet connection in Windows 10 or Windows 7.

Connection request

You can try turning on the Request to connect function in the Wi – Fi settings. This is not the best solution, as you will need to confirm your connection to each new network, but it can help solve the connection problem.

Force reboot

Like other problems, problems with Wi-Fi can be solved by a forced restart of the device.

  • On iPhone XS, iPhone XS Max, iPhone XR, iPhone X, iPhone 8, and iPhone 8 Plus, press the volume up button, then the volume down button, and then hold down the power button until the Apple logo appears on the screen.
  • On iPhone 7 and iPhone 7 Plus, hold down the Side and Volume Down buttons at the same time for at least 10 seconds until you see the Apple logo on the screen.
  • On iPhone 6s and older, iPad, or iPod touch, simultaneously hold down the Home button and the Side or Top button for at least 10 seconds until the logo appears.
  • On the 11-inch or 12.9-inch iPad Pro, press and release the volume up button, then the volume down button, and then hold the power button until the tablet restarts.
READ  Photos won't import from iPhone to computer

How to distribute the Internet to a computer from an iPhone via USB?

Use a USB cable to connect an iPhone or iPad with Hotspot enabled to your computer. If necessary, make this device trusted. Make sure the iPhone or iPad can be found and viewed in the iTunes app.

Is it possible to share the Internet from iPhone to computer?

IOS has a wonderful function “Modem Mode” (access points), which allows you to distribute the Internet from your iPhone or iPad to any device. other smartphones, laptops or a desktop computer. Using the function, you can share the Internet via Wi-Fi or via a USB cable and Bluetooth.

How to distribute Internet from Xiaomi phone to computer?

How to distribute the Internet from a Xiaomi phone

  • Open the Menu and go to the “Settings” of the phone
  • Open the “Wi-Fi hotspot” section
  • Place the switch in the “ON” position.
  • Set your Wi-Fi network name and password.
  • That’s it, you’ve turned on tethering on your Xiaomi phone.

How to distribute the Internet to a computer via USB?

How to connect an Android smartphone as a USB tethering

  • Connect your phone to PC via USB. If this is a new device, wait until the drivers are installed.
  • Open your smartphone settings. In the section “Wireless networks” (“Network”) find the item “Modem mode” (“Modem and access point”).
  • Activate USB tethering.

Why iPhone won’t connect to PC?

Reasons why iPhone won’t connect to computer

distribute, internet, iphone, wire

Physical damage to the lightning connector; Using a third party cable; Defective built-in USB ports; Using an older version of iTunes.

How to connect the Internet from iPhone to computer?

How to use iPhone as a modem

  • Connect iPhone to Computer
  • Go to Control Panel. Network and Internet. View network status and tasks and make sure the connection is activated
  • If this connection is not displayed, restart your computer and reconnect your iPhone.

How to use Bluetooth to connect your computer to the Internet?

You can also connect an iPhone to a laptop to distribute the Internet via Bluetooth. This is done as follows:

Go to the “Bluetooth” section in the “Settings” iPhone.

Switch the toggle switch “Bluetooth” to the active position.

iPhone starts searching for devices to pair with.

Activate Bluetooth on your PC. If the laptop is equipped with the appropriate module, the wireless adapter icon will be in the system tray (at the bottom right of the screen).

Click on the Bluetooth icon with the right mouse button and select “Open Options”.

In the “Bluetooth Settings” section, check the box next to “Allow Bluetooth devices to find this computer”.

Once again click on the Bluetooth icon in the system tray and in the menu that appears, select the option “Add device”.

This will start the search procedure on the computer.

After the PC finds the iPhone and the pairing is established, you can access the Internet through the browser on your computer.

How to provide a PC with Internet via a USB cable?

You can distribute the Internet from iPhone to computer via USB as follows:

Toggle the Hotspot slider in iPhone Settings to the active position. You will see a window like this:

Connect the gadget to the PC with a USB cable. A blue bar will appear at the top of the iPhone screen. a sure sign that the 2 devices are paired.

On a PC, go to the “Network and Sharing Center”, then go to the section “Change adapter settings”.

You will see that in the list of network connections there is a new local area connection named as a mobile device.

Try going online. You will find that when connected via USB, data downloads are even faster than via Wi-Fi.

Connecting a PC to a gadget via USB has another advantage: iPhone battery power is consumed to a much lesser extent.

We distribute the Internet from the Iphone via Bluetooth

To connect to Iphone via Bluetooth, you need to pair it with your computer. The computer monitor displays a code that is entered into the Iphone to activate the “Pair” function. Then you can connect from the computer to the device. The phone will display the message “Modem mode”, which indicates the correct connection. To carry out these operations, you may need the current version of iTunes, if your version is outdated, then you need to reinstall it. During the distribution of the Internet, the phone remains in touch and has the ability to receive SMS messages and incoming calls. During a conversation, the Internet connection is interrupted and is automatically restored after its end.

READ  How to find out the password from Wi-Fi via iPhone

The iPhone had the ability to transfer data back in 2008. This is a very useful function, since you can distribute the Internet from an iPhone or Apple tablet with a SIM card to computers, laptops, and even to other phones.

  • Enable data transfer to iPhone.
  • Connect devices to the created network in a suitable way.

Watch also a video where you will learn how to distribute the Internet from an iPhone or iPad:

iPhone : Share Internet connection with Your PC using USB cable | NETVN

Baud rate

You can distribute the Internet both via Wi-Fi, and via USB or Bluetooth. over, you can create several connections at the same time. For example, connect iPad via Wi-Fi, and a stationary computer that does not have wireless modules. via USB.

When choosing how to distribute the Internet from iPhone to computer, do not forget about the data transfer speed. Wi-Fi provides sufficient speed for both comfortable surfing and downloading files. USB transfer speed varies by version. 2.0, which models 4, 4s, 5 and 6 work with, is much slower than Wi-Fi. But USB 3.0 and 4.0 show solid speed. Bluetooth of any of the existing versions is 2 orders of magnitude inferior to them.

Note that speed is based on the slowest device in the pair. Therefore, if you are using an iPhone 4s with USB 2.0 and the most modern laptop with USB 4.0, the data transfer speed in this bundle will still not exceed 480 Mbps.

Cellular data transmission is a power-consuming operation. The phone battery will drain very quickly, so it makes sense to put the phone on charge immediately after turning on the tethering mode.

distribute, internet, iphone, wire

How to distribute the Internet from an Iphone

Iphone, which is equipped with a cellular module and has a connection to the mobile Internet, will be able to distribute the Internet to other devices. If you have an unlimited or low-cost data plan, then you are not in trouble. Very often, billing is carried out according to the downloaded and transmitted volume of information, which will quickly bring your balance to a zero state. To use your iPhone as a modem, you must first make sure Cellular Data and Enable 3G / 4G LTE are enabled. To do this, go to the “Settings” tab and select “Cellular”. Next, go to the “Modem Mode” option and enable this function. The system may ask you to activate Bluetooth for this. A message about the “Modem mode” function will light up on the phone screen. It remains only to specify the password for the Wi-Fi connection and start distributing the Internet. It is recommended that the password contains at least 8 characters. These include uppercase and lowercase English letters, numbers, and punctuation marks. With these simple steps, you can connect to the Internet from a computer or other devices based on Windows, Android or Linux. Wi-Fi is automatically disabled if you disconnect all connected devices from the hotspot.

By WI-FI

Let’s figure out how to distribute Wi-Fi from iPhone to devices running different operating systems. First, turn on Wi-Fi on your PC or laptop.

In Windows 7 and 10, this can be done through the icon located on the taskbar. On laptops, turning wireless devices on and off is also possible using a dedicated switch or function keys. Which one depends on the model, so see the instructions for your laptop. You can also control Wi-Fi from the Control Panel.

The situation is similar in Mac OS. You can connect Wi-Fi through the icon on the top panel, or in the system settings, in the “Network” section.

It’s easy to figure out how to distribute the Internet from iPhone to iPad, because they both work under iOS. After turning on data transfer on the phone, you just need to turn on Wi-Fi in the tablet settings.

Similar steps are required for Android tablets or phones.

After activating the modem mode, a network is created, which is visible in the list of Wi-Fi connections. The network name contains the word “iPhone”. Just select this network and after asking for a password, enter it.

There is no need to change the parameters of the created connection, everything should work fine with the default settings. If everything worked out, the following message will appear on the top line on the smartphone: “Connected devices 1”.

Despite the fact that iPhone users are more accustomed to distributing the Internet to their computer via Wi-Fi, a wired connection looks even preferable. It uses up battery power more slowly and provides faster connection speeds.

The method of connecting via Bluetooth among users is unpopular for a number of reasons: firstly, not all PCs have a Bluetooth module, and secondly, in order for pairing to become possible, the user will have to find and install the necessary drivers. Few people want to spend time on this, especially if Honor has no advantages of a Bluetooth connection over, say, a Wi-Fi connection.

READ  The screen on the iPhone has increased what to do

Sometimes there are problems associated with the lack of access to free Wi-Fi. In this case, an Iphone can be used as a modem, which meets certain system requirements and uses the cellular communication of the operator providing the modem service on this device. Only then will he create a portable Internet access point and be able to distribute Wi-Fi to other devices, as well as using Bluetooth and USB cables. Setting up functions does not take much time, unlike routers.

Previously, for these purposes, it was required to install additional software, now all the necessary functions are in standard iOS, which makes it easy and quick to enable, configure and operate. But at the same time you need to remember that working in modem mode, Iphone discharges much faster, so after finishing work, you need to turn off the “Modem mode” function.

If you still cannot connect to a tethering device via Bluetooth

Turn Bluetooth off and on again on devices:

  • On iOS devices, select Bluetooth Settings and turn Bluetooth off and then back on.
  • On a Mac, click in the menu bar, then turn Bluetooth off and back on.
  • On your PC, select Options, click. then turn bluetooth off and back on.

If you still cannot connect, follow these steps:

  • Unpair between devices:
  • On the iPad or iPod touch that you want to connect to the tethering device, select Bluetooth Settings. Click next to the name of the tethering device, then click Forget This Device.
  • On your Mac, choose the Apple () System Preferences, then click Bluetooth. Select the tethering device, then click.
  • On a Windows PC, click in the notification area. Select Show Bluetooth Devices and click the name of the device with Hot Tethering enabled. Click Remove, then click OK.
  • Restart all devices.
  • Pair the devices and try to connect to the device in tethering mode again.

If you cannot connect to a tethering device via Bluetooth

Follow these steps to pair the devices and connect to the tethering device via Bluetooth.

How to distribute mobile Internet from a phone

Connecting to a device in modem mode via Bluetooth

  • On a Mac computer, click in the menu bar. Select your iOS tethering device, then select Connect to Network. You can confirm the establishment of the connection in the “System settings” “Network”. If the connection fails, go to the next section.
  • On a Windows PC, click in the notification area and select Join Personal Area Network (PAN). Right-click the device name, point to Connect Via, and select Access Point. If you still can’t connect, go to the next section.

Additional help

If you still can’t connect, contact Apple Support for help with your iPhone or iPad (Wi-Fi Cellular).

The iPhone had the ability to transfer data back in 2008. This is a very useful function, since you can distribute the Internet from an iPhone or Apple tablet with a SIM card to computers, laptops, and even to other phones.

  • Enable data transfer to iPhone.
  • Connect devices to the created network in a suitable way.

We connect devices

Pairing devices

  • On a device that is in tethering, select Settings tethering and make sure tethering is enabled.
  • Select “Settings” Bluetooth and make sure Bluetooth is turned on.
  • Leave this screen open, then follow the steps for the connected device:
  • On your iPad or iPod touch, go to Bluetooth Settings and make sure Bluetooth is turned on. Press the device working in tethering mode, confirm the code that appears, then press “Pair” on both devices.
  • On your Mac, choose the Apple () System Preferences, then click Bluetooth and make sure Bluetooth is turned on. Select a tethering device, click Connect and follow the instructions on the screen.
  • On a Windows PC, click the Bluetooth icon in the notification area and make sure Bluetooth is turned on. Select “Add Bluetooth Device” and follow the instructions on the screen.