How To Disable Password On Laptop

Computer help U-Service. Registry editor

If you forgot your password, then this method is just for you! To remove the password through the registry editor, you need:

  • We repeat the first two steps from the previous method. Only this time we enter another command: regedit
  • You will see the registry editor in which you need to select the “HKLM” section
  • Now you should open the branch SoftwareMicrosoftWindows NTCurrentVersion
  • Go to the Winlogon section, open the parameter called “AutoAdminLogon” and set this parameter to “1”
  • After that, the “DefaultDomainName” key will need to set a parameter that will correspond to the name of your PC (you can clarify it by opening the system properties by right-clicking on “My Computer” on the Windows desktop)
  • For the parameter called “DefaultUserName” as a value, you must specify the username through which the authorization process in the system will take place in the future
  • In the end, it remains to create the “DefaultPassword” string parameter. And its value will be the password from the account that was specified in “DefaultUserName”.

For the changes to take effect, you need to close the registry editor and restart your computer.

Reset Windows 7 password

In a situation where a person does not have access to the system, the use of a portable drive of any type will help. Next, you should perform the following actions:

  • Boot the OS from the installation disk / flash drive.
  • Click on the line “System Restore” and select “Command Prompt”.
  • When a black window appears, enter the command copy c: windowssystem32sethc.Exe c: and press the Enter key. This will help create a backup, which will be responsible for sticking buttons in the system on the root disk.
  • We are replacing the seth.Exe file located in the System32 folder with cmd.Exe, copy c: windowssystem32cmd.Exe c: windowssystem32sethc.Exe.
  • Reboot your PC.
  • Press the “Shift” button to display the command line.
  • Changing the Net user code.

How to remove Windows 10 login password: SIMple instructions

Windows 10 login password is a security measure. It protects your personal information from other users.

But if we are talking about a stationary computer or laptop that is always at home, a password is often NOT required.

Removing the password from Windows is not difficult. There are several ways to do this. Each of them is suitable for a specific situation.

Let’s consider with you the most SIMple and effective.

How to remove password on laptop at login

Disable dynamic locking.

Check the status of account lockout settings.

To do this, enter Dynamic locking in the Windows 10 search bar. And go to the suggested settings section.

Make sure there is no check mark next to Allow Windows to automatically lock the device when you are away.

Disable local account password

If you use a local account to log into Windows 10, it is quite easy to deselect the password. You can just delete it.

To do this, do the following:

  • Call up the Start menu using the Win key. Or using the corresponding icon on the Quick Access Toolbar.
  • Open Options. You can also call this interface using the Win I key combination.
  • Go to the section called “Accounts”.
  • Using the navigation menu on the left side of the window, go to the “Login Options” category.
  • In the column “Password” Click on the Change button.
  • Enter the current access code for your account.
  • Leave all fields blank and click Next. To remove the check.
  • If the OS asks you to reboot. do it.

The current password will be removed immediately and will NOT be required to log into the Windows 10 operating system the next time you turn on your personal computer.

How to remove Windows 10 login password: SIMple instructions. Additional Information

Judging by the comments, many Windows 10 users are faced with the fact that even after disabling the password prompt by all means, it is sometimes requested after the computer or laptop has not been used for a while. And most often the prerequisite for this turned out to be the included splash screen with the option “Start at the login screen”.

To disable this item, press the WinR keys and type (copy) the following into the Run window:

Hit Enter. In the screensaver settings window that opens, Uncheck “Start from the login screen” or Disable the screensaver altogether (if the active screensaver is “Blank”, then this is also an enabled screensaver, the item to disable looks like “Net”).

And one more thing: in Windows 10 of the latest Vera, the “Dynamic blocking” function appeared, the settings of which are in Settings. Accounts. Login Options.

READ  How To Flip The Camera On A Laptop

If the function is enabled, then Windows 10 can be locked with a password when, for example, you leave the computer with a paired smartphone (or turn off Bluetooth in it).

And the last nuance: for some users, after using the first method of disabling the login password, two identical users appear on the login screen and a password is required. This usually happens when using a Microsoft account.A possible solution is described in the instructions Two identical Windows 10 users at logon.

How to enable automatic login to Windows 10 using Autologon for Windows

Another easy way to disable password entry when logging into Windows 10, and perform it automatically, is the free Autologon for Windows program, which was previously available on the official Microsoft Sysinternals website, and now only on third-party sites (but it’s easy to find the utility on the Internet).

If, for some reason, the ways to disable the password at the entrance, described above, did not work, you can safely try this option, in any case, there will definitely not be something malicious in it, and most likely it will work. All that is required after starting the program is to agree to the terms of use, and then enter the current username and password (and the domain, if you work in a domain, is usually not necessary for the home user, the program can automatically substitute the computer name) and click the Enable button.

You will see information that automatic login is enabled, as well as a message that the login information is encrypted in the registry (i.e., this is essentially the second method of this tutorial, but more secure). Done. the next time you restart or turn on the computer or laptop, you will NOT need to enter the password.

In the future, if you need to re-enable the Windows 10 password prompt, run Autologon again and click the “Disable” button to disable automatic login.

Instructions

How to turn off the password prompt when waking up from sleep in Registry Editor or Local Group Policy Editor

In addition to Windows 10 settings, you can disable the password prompt when the system wakes up from sleep or hibernation mode by changing the Corresponding system settings in the registry. There are two ways to do this.

For Windows 10 Pro and Enterprise The easiest way is to use the Local Group Policy Editor:

  • Press the WinR keys and type gpedit.Msc
  • Navigate to Computer Configuration. Administrative Templates. System. Power Management. Hibernation Settings.
  • Find two options “Require password when waking from sleep” (one for battery power, the other for mains power).
  • Double click on each of THESE options and set “Disabled”.

After applying the settings, the password will no longer be prompted when exiting sleep mode.

In Windows 10, there is no Local Group Policy Home Editor, but you can do the same using the Registry Editor:

  • Go to the registry editor and go to the section (in the absence of the specified subsections, create them using the “New”. “Section” item of the context menu by right clicking on the existing section).
  • Create two DWORD values ​​(on the right side of the registry editor) named ACSettingIndex and DCSettingIndex, the value of each of them is 0 (it is like this immediately after creation).
  • Close Registry Editor and restart your computer.

Done password after Windows 10 wakes up from sleep Will not be asked.

Disable password prompt when logging into user account settings

The first way to remove the password prompt when logging into Windows 10 is very SIMple and does NOT differ from how it was done in the previous OS version. It will take a few SIMple steps.

  • If your system is logged in not by a password, but by a PIN, first Disable them Using both parts of this instruction: How to disable the request to create a PIN and remove the PIN in Windows 10.
  • Press the Windows R keys (where Windows is the OS logo key) and type netplwiz or control userpasswords2 then click OK. Both commands will bring up the same account setup window.
  • To enable automatic logon to Windows 10 without entering a password, select the user for which you want to remove the password prompt and Uncheck the box next to Require username and password. If there are comments like this, the solution is described here: What to do if there is no item Require username and password in Windows 10.
  • Click “OK” or “Apply”, after which you will need to enter the current password and its confirmation for the selected user (which can be changed by SIMply entering another login). Attention: if you are using a Microsoft account and the method does not work, try again, but in the upper field, instead of the username, enter the associated email address (E-mail).

In case there is a checkmark “Require username and password” in the window, go to Settings. Accounts. Sign-in options and check if there is an item “Require Windows Hello for Microsoft account”. If there is. Disable and re-enter the automatic login settings. If not, run the command line as administrator (how to do it) and enter the command (pressed Enter after it):

After executing the command, close the command line and restart your computer. Then repeat the steps described above. the item to disable the password prompt should appear. Also, the “Require username and password” option will be unavailable if your computer is currently connected to a domain. However, it is possible to disable the password prompt using the registry editor, although this method is less secure than the one just described.

READ  Which Processor Is Best For Laptop To Work

How to remove password when logging into Windows 10

The instructions describe several ways to remove the password when entering Windows 10 when you turn on the computer, as well as separately when you wake up from sleep mode. This can be done Not only using the account settings in the control panel, but also Using the registry editor, power settings (in order to disable the password prompt when waking up from sleep), or free programs to enable automatic login, or you can SIMply delete the password user. all these options are detailed below.

In order to complete the steps described below and enable automatic login to Windows 10, your account must have administrator rights (this is usually the case by default on home computers). At the end of the article, there is also an instruction that clearly shows the first of the described methods. See Also: How to Set Windows 10 Password How to Reset Windows 10 Password (If You Forgot It).

  • How to remove password at login (disable password prompt) in account settings
  • Automatically enter Windows 10 password using Registry Editor
  • Disable password when waking from sleep Windows 10
  • Sign in to Windows 10 without a password using Microsoft Sysinternals Autologon
  • How to remove Windows 10 user password completely
  • Instructions
  • Additional Information

How to remove login password using Windows 10 Registry Editor

There is another way to do the above. to use the registry editor for this, but you should take into account that in this case your password will be stored in clear text as one of the values ​​of the Windows registry, so anyone can view it. Note: a SIMilar method will also be considered below, but with password encryption (using Sysinternals Autologon).

First, start the Windows 10 Registry Editor by pressing the Windows R keys, type regedit and press Enter.

Go to the registry key

To enable automatic logon for a domain, Microsoft account, or local Windows 10 account, follow these steps:

  • Change the AutoAdminLogon value (double click on this value on the right) to 1.
  • Change the DefaultDomainName value to the domain name or the name of the local computer (you can see it in the properties of “This computer”). If this value is present, it can be created (Right mouse button. New. String parameter).
  • If necessary, Change the DefaultUserName to a different username, or leave the current user.
  • Create a string parameter DefaultPassword and specify the account password as the value.

After that, you can close the registry editor and restart the computer. logging into the system under the selected user should occur without asking for a username and password.

How to completely remove Windows 10 user password (remove password)

If you are using a local account on the computer (see How to delete a Microsoft Windows 10 account and use a local account), then you can completely remove (delete) the password for your user, then Ego will not have to enter, even if you lock the computer with the keys WinL. To do this, follow these steps.

There are several ways to do this, one of them, and probably the easiest one, is via the command line:

  • Run the command line as an administrator (for this you can start typing “Command line” in the search on the taskbar, and when the desired item is found, they will right-click on it and select the menu item “Run as administrator”.
  • On the command line, use the following commands in order, pressing Enter after each one.
  • Net user (as a result of executing this command, you will see a list of users, including hidden system ones, under the topic names, under which they appear in the system. Remember the spelling of your username).

(However, if the username consists of more than one word, also enclose it in quotes).

After executing the last command, the password will be removed from the user, and it will not be necessary to enter it to enter Windows 10.

How to disable password when waking up from sleep

You may also need to remove the Windows 10 password prompt when your computer or laptop wakes up from sleep. For this, the system provides a separate setting, which is located in (click on the notification icon) All parameters. Accounts. Login parameters. The same option can be changed using the Registry Editor or Local Group Policy Editor, which will be shown below.

How To Disable Password On Laptop

In the “Login required” section (in some computers or laptops this section may not be available) set “Never” and after that, exit from sleep computer Will not ask for your password again.

There is one more way to disable the password request in this scenario. use the “Power supply” item in the Control Panel. To do this, opposite the current scheme, click “Configure power scheme”, and in the next window. “Change advanced power settings”.

In the additional parameters window, click on “Change parameters that are currently unavailable”, and then change the value “Require password on wakeup” to “Net”. Apply the settings made. Not in all systems in the power supply parameters you will find such an item, if it is absent, we skip this step.

READ  How To Connect A Wired Mouse To A Laptop

Additional Information

Judging by the comments, many Windows 10 users are faced with the fact that even after disabling the password prompt by all means, it is sometimes requested after the computer or laptop has not been used for a while. And most often the prerequisite for this turned out to be the included splash screen with the option “Start at the login screen”.

To disable this item, press the WinR keys and type (copy) the following into the Run window:

Hit Enter. In the screensaver settings window that opens, Uncheck “Start from the login screen” or Disable the screensaver altogether (if the active screensaver is “Blank”, then this is also an enabled screensaver, the item to disable looks like “Net”).

And one more thing: in Windows 10 of the latest Vera, the “Dynamic blocking” function appeared, the settings of which are in Settings. Accounts. Login Options.

If the function is enabled, then Windows 10 can be locked with a password when, for example, you leave the computer with a paired smartphone (or turn off Bluetooth in it).

And the last nuance: for some users, after using the first method of disabling the login password, two identical users appear on the login screen and a password is required. This usually happens when using a Microsoft account.A possible solution is described in the instructions Two identical Windows 10 users at logon.

How to remove the PIN when logging into Windows 10

Many users, after installing the Windows 10 operating system, find that they must enter a PIN every time they log in. This feature protects your account from outside interference, which is especially useful on laptops, tablets and other mobile devices. But, for a desktop computer, which is used exclusively at home, such protection is often unnecessary. Now you will learn how to remove the PIN code when entering the Windows 10 operating system.

How to completely disable PIN and password at login

In most cases, users want not only to remove the PIN, but also to disable the password in order to enter Windows 10 quickly and without any obstacles. In order to achieve this result, you need to use the “netplwiz” command. Press the Windows-R key combination, enter this command and press the enter key.

As a result, the “User Accounts” window will appear in front of you. In this window there will be a list of users who are registered on this computer. Here you need to select the user you want to use to log into Windows 10. After that, you need to uncheck the box next to the “Require username and password” function and save the settings using the “Apply” button.

This will bring up the “Auto Login” window. In this window, the username will already be indicated, you will only have to enter the password twice and click on the “OK” button.

That’s all, this is enough to remove the PIN when logging into Windows 10. The next time you turn on your computer, you will log in automatically.

It should be noted that this setting only works when you turn on or restart your computer. Windows 10 will still ask for a PIN when it wakes up from sleep. In order to disable the PIN-code when exiting the sleep mode, you need to use the “Options” menu. This menu can be opened in several ways, for example, you can go to the “Start” menu and click on the button in the form of a gear, you can also use the keyboard shortcut Windows-i.

In the “Options” menu, go to the “Accounts. Login Options” section. Here, at the very top of the window, there is a drop-down list called Login Required. Open it and select the “Never” option. After that, the PIN will be disabled and upon exiting sleep mode.

In addition, you need to know that when you lock your computer using the Windows-L key combination (from the English Lock), a PIN request will appear in any case, regardless of the above settings.

How to disable the PIN and switch to using a password

If you want to opt out of using a PIN and sign in to Windows 10 using a password, then you can SIMply delete the PIN in the Options menu. As we said, the “Options” menu can be opened through the “Start” menu or by using the keyboard shortcut Windows-i.

After opening the “Options” menu, go to the “Accounts. Login Options” section. This section contains all the settings that relate to logging into Windows 10. Here you can change the password, PIN, set up a picture password, etc. In order to remove the PIN code, find this setting and click on the “Delete” button.

Next Confirm the removal of the PIN by clicking the “Delete” button again.

And enter the password for your account.

After that, the PIN code will be disabled and the next time you log into Windows 10 you will need to enter the password for your account.